diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/include/bios_parser_types.h')
-rw-r--r-- | drivers/gpu/drm/amd/display/include/bios_parser_types.h | 349 |
1 files changed, 349 insertions, 0 deletions
diff --git a/drivers/gpu/drm/amd/display/include/bios_parser_types.h b/drivers/gpu/drm/amd/display/include/bios_parser_types.h new file mode 100644 index 0000000000..812377d9e4 --- /dev/null +++ b/drivers/gpu/drm/amd/display/include/bios_parser_types.h @@ -0,0 +1,349 @@ +/* + * Copyright 2012-15 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: AMD + * + */ + +#ifndef __DAL_BIOS_PARSER_TYPES_H__ + +#define __DAL_BIOS_PARSER_TYPES_H__ + +#include "dm_services.h" +#include "include/signal_types.h" +#include "include/grph_object_ctrl_defs.h" +#include "include/gpio_types.h" +#include "include/link_service_types.h" + +/* TODO: include signal_types.h and remove this enum */ +enum as_signal_type { + AS_SIGNAL_TYPE_NONE = 0L, /* no signal */ + AS_SIGNAL_TYPE_DVI, + AS_SIGNAL_TYPE_HDMI, + AS_SIGNAL_TYPE_LVDS, + AS_SIGNAL_TYPE_DISPLAY_PORT, + AS_SIGNAL_TYPE_GPU_PLL, + AS_SIGNAL_TYPE_XGMI, + AS_SIGNAL_TYPE_UNKNOWN +}; + +enum bp_result { + BP_RESULT_OK = 0, /* There was no error */ + BP_RESULT_BADINPUT, /*Bad input parameter */ + BP_RESULT_BADBIOSTABLE, /* Bad BIOS table */ + BP_RESULT_UNSUPPORTED, /* BIOS Table is not supported */ + BP_RESULT_NORECORD, /* Record can't be found */ + BP_RESULT_FAILURE +}; + +enum bp_encoder_control_action { + /* direct VBIOS translation! Just to simplify the translation */ + ENCODER_CONTROL_DISABLE = 0, + ENCODER_CONTROL_ENABLE, + ENCODER_CONTROL_SETUP, + ENCODER_CONTROL_INIT +}; + +enum bp_transmitter_control_action { + /* direct VBIOS translation! Just to simplify the translation */ + TRANSMITTER_CONTROL_DISABLE = 0, + TRANSMITTER_CONTROL_ENABLE, + TRANSMITTER_CONTROL_BACKLIGHT_OFF, + TRANSMITTER_CONTROL_BACKLIGHT_ON, + TRANSMITTER_CONTROL_BACKLIGHT_BRIGHTNESS, + TRANSMITTER_CONTROL_LCD_SETF_TEST_START, + TRANSMITTER_CONTROL_LCD_SELF_TEST_STOP, + TRANSMITTER_CONTROL_INIT, + TRANSMITTER_CONTROL_DEACTIVATE, + TRANSMITTER_CONTROL_ACTIAVATE, + TRANSMITTER_CONTROL_SETUP, + TRANSMITTER_CONTROL_SET_VOLTAGE_AND_PREEMPASIS, + /* ATOM_TRANSMITTER_ACTION_POWER_ON. This action is for eDP only + * (power up the panel) + */ + TRANSMITTER_CONTROL_POWER_ON, + /* ATOM_TRANSMITTER_ACTION_POWER_OFF. This action is for eDP only + * (power down the panel) + */ + TRANSMITTER_CONTROL_POWER_OFF +}; + +enum bp_external_encoder_control_action { + EXTERNAL_ENCODER_CONTROL_DISABLE = 0, + EXTERNAL_ENCODER_CONTROL_ENABLE = 1, + EXTERNAL_ENCODER_CONTROL_INIT = 0x7, + EXTERNAL_ENCODER_CONTROL_SETUP = 0xf, + EXTERNAL_ENCODER_CONTROL_UNBLANK = 0x10, + EXTERNAL_ENCODER_CONTROL_BLANK = 0x11, +}; + +enum bp_pipe_control_action { + ASIC_PIPE_DISABLE = 0, + ASIC_PIPE_ENABLE, + ASIC_PIPE_INIT +}; + +enum bp_lvtma_control_action { + LVTMA_CONTROL_LCD_BLOFF = 2, + LVTMA_CONTROL_LCD_BLON = 3, + LVTMA_CONTROL_POWER_ON = 12, + LVTMA_CONTROL_POWER_OFF = 13 +}; + +struct bp_encoder_control { + enum bp_encoder_control_action action; + enum engine_id engine_id; + enum transmitter transmitter; + enum signal_type signal; + enum dc_lane_count lanes_number; + enum dc_color_depth color_depth; + bool enable_dp_audio; + uint32_t pixel_clock; /* khz */ +}; + +struct bp_external_encoder_control { + enum bp_external_encoder_control_action action; + enum engine_id engine_id; + enum dc_link_rate link_rate; + enum dc_lane_count lanes_number; + enum signal_type signal; + enum dc_color_depth color_depth; + bool coherent; + struct graphics_object_id encoder_id; + struct graphics_object_id connector_obj_id; + uint32_t pixel_clock; /* in KHz */ +}; + +struct bp_crtc_source_select { + enum engine_id engine_id; + enum controller_id controller_id; + /* from GPU Tx aka asic_signal */ + enum signal_type signal; + /* sink_signal may differ from asicSignal if Translator encoder */ + enum signal_type sink_signal; + enum display_output_bit_depth display_output_bit_depth; + bool enable_dp_audio; +}; + +struct bp_transmitter_control { + enum bp_transmitter_control_action action; + enum engine_id engine_id; + enum transmitter transmitter; /* PhyId */ + enum dc_lane_count lanes_number; + enum clock_source_id pll_id; /* needed for DCE 4.0 */ + enum signal_type signal; + enum dc_color_depth color_depth; /* not used for DCE6.0 */ + enum hpd_source_id hpd_sel; /* ucHPDSel, used for DCe6.0 */ + enum tx_ffe_id txffe_sel; /* used for DCN3 */ + enum engine_id hpo_engine_id; /* used for DCN3 */ + struct graphics_object_id connector_obj_id; + /* symClock; in 10kHz, pixel clock, in HDMI deep color mode, it should + * be pixel clock * deep_color_ratio (in KHz) + */ + uint32_t pixel_clock; + uint32_t lane_select; + uint32_t lane_settings; + bool coherent; + bool multi_path; + bool single_pll_mode; +}; + +struct bp_hw_crtc_timing_parameters { + enum controller_id controller_id; + /* horizontal part */ + uint32_t h_total; + uint32_t h_addressable; + uint32_t h_overscan_left; + uint32_t h_overscan_right; + uint32_t h_sync_start; + uint32_t h_sync_width; + + /* vertical part */ + uint32_t v_total; + uint32_t v_addressable; + uint32_t v_overscan_top; + uint32_t v_overscan_bottom; + uint32_t v_sync_start; + uint32_t v_sync_width; + + struct timing_flags { + uint32_t INTERLACE:1; + uint32_t PIXEL_REPETITION:4; + uint32_t HSYNC_POSITIVE_POLARITY:1; + uint32_t VSYNC_POSITIVE_POLARITY:1; + uint32_t HORZ_COUNT_BY_TWO:1; + } flags; +}; + +struct bp_adjust_pixel_clock_parameters { + /* Input: Signal Type - to be converted to Encoder mode */ + enum signal_type signal_type; + /* Input: Encoder object id */ + struct graphics_object_id encoder_object_id; + /* Input: Pixel Clock (requested Pixel clock based on Video timing + * standard used) in KHz + */ + uint32_t pixel_clock; + /* Output: Adjusted Pixel Clock (after VBIOS exec table) in KHz */ + uint32_t adjusted_pixel_clock; + /* Output: If non-zero, this refDiv value should be used to calculate + * other ppll params */ + uint32_t reference_divider; + /* Output: If non-zero, this postDiv value should be used to calculate + * other ppll params */ + uint32_t pixel_clock_post_divider; + /* Input: Enable spread spectrum */ + bool ss_enable; +}; + +struct bp_pixel_clock_parameters { + enum controller_id controller_id; /* (Which CRTC uses this PLL) */ + enum clock_source_id pll_id; /* Clock Source Id */ + /* signal_type -> Encoder Mode - needed by VBIOS Exec table */ + enum signal_type signal_type; + /* Adjusted Pixel Clock (after VBIOS exec table) + * that becomes Target Pixel Clock (100 Hz units) */ + uint32_t target_pixel_clock_100hz; + /* Calculated Reference divider of Display PLL */ + uint32_t reference_divider; + /* Calculated Feedback divider of Display PLL */ + uint32_t feedback_divider; + /* Calculated Fractional Feedback divider of Display PLL */ + uint32_t fractional_feedback_divider; + /* Calculated Pixel Clock Post divider of Display PLL */ + uint32_t pixel_clock_post_divider; + struct graphics_object_id encoder_object_id; /* Encoder object id */ + /* VBIOS returns a fixed display clock when DFS-bypass feature + * is enabled (KHz) */ + uint32_t dfs_bypass_display_clock; + /* color depth to support HDMI deep color */ + enum transmitter_color_depth color_depth; + + struct program_pixel_clock_flags { + uint32_t FORCE_PROGRAMMING_OF_PLL:1; + /* Use Engine Clock as source for Display Clock when + * programming PLL */ + uint32_t USE_E_CLOCK_AS_SOURCE_FOR_D_CLOCK:1; + /* Use external reference clock (refDivSrc for PLL) */ + uint32_t SET_EXTERNAL_REF_DIV_SRC:1; + /* Use DFS bypass for Display clock. */ + uint32_t SET_DISPCLK_DFS_BYPASS:1; + /* Force program PHY PLL only */ + uint32_t PROGRAM_PHY_PLL_ONLY:1; + /* Support for YUV420 */ + uint32_t SUPPORT_YUV_420:1; + /* Use XTALIN reference clock source */ + uint32_t SET_XTALIN_REF_SRC:1; + /* Use GENLK reference clock source */ + uint32_t SET_GENLOCK_REF_DIV_SRC:1; + } flags; +}; + +enum bp_dce_clock_type { + DCECLOCK_TYPE_DISPLAY_CLOCK = 0, + DCECLOCK_TYPE_DPREFCLK = 1 +}; + +/* DCE Clock Parameters structure for SetDceClock Exec command table */ +struct bp_set_dce_clock_parameters { + enum clock_source_id pll_id; /* Clock Source Id */ + /* Display clock or DPREFCLK value */ + uint32_t target_clock_frequency; + /* Clock to set: =0: DISPCLK =1: DPREFCLK =2: PIXCLK */ + enum bp_dce_clock_type clock_type; + + struct set_dce_clock_flags { + uint32_t USE_GENERICA_AS_SOURCE_FOR_DPREFCLK:1; + /* Use XTALIN reference clock source */ + uint32_t USE_XTALIN_AS_SOURCE_FOR_DPREFCLK:1; + /* Use PCIE reference clock source */ + uint32_t USE_PCIE_AS_SOURCE_FOR_DPREFCLK:1; + /* Use GENLK reference clock source */ + uint32_t USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK:1; + } flags; +}; + +struct spread_spectrum_flags { + /* 1 = Center Spread; 0 = down spread */ + uint32_t CENTER_SPREAD:1; + /* 1 = external; 0 = internal */ + uint32_t EXTERNAL_SS:1; + /* 1 = delta-sigma type parameter; 0 = ver1 */ + uint32_t DS_TYPE:1; +}; + +struct bp_spread_spectrum_parameters { + enum clock_source_id pll_id; + uint32_t percentage; + uint32_t ds_frac_amount; + + union { + struct { + uint32_t step; + uint32_t delay; + uint32_t range; /* In Hz unit */ + } ver1; + struct { + uint32_t feedback_amount; + uint32_t nfrac_amount; + uint32_t ds_frac_size; + } ds; + }; + + struct spread_spectrum_flags flags; +}; + +struct bp_disp_connector_caps_info { + uint32_t INTERNAL_DISPLAY : 1; + uint32_t INTERNAL_DISPLAY_BL : 1; +}; + +struct bp_encoder_cap_info { + uint32_t DP_HBR2_CAP:1; + uint32_t DP_HBR2_EN:1; + uint32_t DP_HBR3_EN:1; + uint32_t HDMI_6GB_EN:1; + uint32_t IS_DP2_CAPABLE:1; + uint32_t DP_UHBR10_EN:1; + uint32_t DP_UHBR13_5_EN:1; + uint32_t DP_UHBR20_EN:1; + uint32_t DP_IS_USB_C:1; + uint32_t RESERVED:27; +}; + +struct bp_soc_bb_info { + uint32_t dram_clock_change_latency_100ns; + uint32_t dram_sr_exit_latency_100ns; + uint32_t dram_sr_enter_exit_latency_100ns; +}; + +struct bp_connector_speed_cap_info { + uint32_t DP_HBR2_EN:1; + uint32_t DP_HBR3_EN:1; + uint32_t HDMI_6GB_EN:1; + uint32_t DP_UHBR10_EN:1; + uint32_t DP_UHBR13_5_EN:1; + uint32_t DP_UHBR20_EN:1; + uint32_t DP_IS_USB_C:1; + uint32_t RESERVED:28; +}; + +#endif /*__DAL_BIOS_PARSER_TYPES_H__ */ |