diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/Kconfig')
| -rw-r--r-- | drivers/gpu/drm/bridge/Kconfig | 397 |
1 files changed, 397 insertions, 0 deletions
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig new file mode 100644 index 0000000000..3e6a4e2044 --- /dev/null +++ b/drivers/gpu/drm/bridge/Kconfig @@ -0,0 +1,397 @@ +# SPDX-License-Identifier: GPL-2.0-only +config DRM_BRIDGE + def_bool y + depends on DRM + help + Bridge registration and lookup framework. + +config DRM_PANEL_BRIDGE + def_bool y + depends on DRM_BRIDGE + select DRM_PANEL + help + DRM bridge wrapper of DRM panels + +menu "Display Interface Bridges" + depends on DRM && DRM_BRIDGE + +config DRM_CHIPONE_ICN6211 + tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge" + depends on OF + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select DRM_PANEL_BRIDGE + select REGMAP_I2C + help + ICN6211 is MIPI-DSI/RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input + and produce RGB565, RGB666, RGB888 output format. + + If in doubt, say "N". + +config DRM_CHRONTEL_CH7033 + tristate "Chrontel CH7033 Video Encoder" + depends on OF + select DRM_KMS_HELPER + help + Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as + found in the Dell Wyse 3020 thin client. + + If in doubt, say "N". + +config DRM_CROS_EC_ANX7688 + tristate "ChromeOS EC ANX7688 bridge" + depends on OF + depends on I2C_CROS_EC_TUNNEL || COMPILE_TEST + select DRM_KMS_HELPER + select REGMAP_I2C + help + ChromeOS EC ANX7688 is an ultra-low power + 4K Ultra-HD (4096x2160p60) mobile HD transmitter + designed for ChromeOS devices. It converts HDMI + 2.0 to DisplayPort 1.3 Ultra-HD. It is connected + to the ChromeOS Embedded Controller. + +config DRM_DISPLAY_CONNECTOR + tristate "Display connector support" + depends on OF + help + Driver for display connectors with support for DDC and hot-plug + detection. Most display controllers handle display connectors + internally and don't need this driver, but the DRM subsystem is + moving towards separating connector handling from display controllers + on ARM-based platforms. Saying Y here when this driver is not needed + will not cause any issue. + +config DRM_FSL_LDB + tristate "Freescale i.MX8MP LDB bridge" + depends on OF + depends on ARCH_MXC || COMPILE_TEST + select DRM_KMS_HELPER + select DRM_PANEL_BRIDGE + help + Support for i.MX8MP DPI-to-LVDS on-SoC encoder. + +config DRM_ITE_IT6505 + tristate "ITE IT6505 DisplayPort bridge" + depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HDCP_HELPER + select DRM_DISPLAY_HELPER + select DRM_DP_AUX_BUS + select DRM_KMS_HELPER + select DRM_DP_HELPER + select EXTCON + select CRYPTO + select CRYPTO_HASH + help + ITE IT6505 DisplayPort bridge chip driver. + +config DRM_LONTIUM_LT8912B + tristate "Lontium LT8912B DSI/HDMI bridge" + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select REGMAP_I2C + select VIDEOMODE_HELPERS + help + Driver for Lontium LT8912B DSI to HDMI bridge + chip driver. + Please say Y if you have such hardware. + + Say M here if you want to support this hardware as a module. + The module will be named "lontium-lt8912b". + +config DRM_LONTIUM_LT9211 + tristate "Lontium LT9211 DSI/LVDS/DPI bridge" + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select REGMAP_I2C + help + Driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI + input to Single-link/Dual-Link DSI/LVDS or Single DPI output bridge + chip. + Please say Y if you have such hardware. + +config DRM_LONTIUM_LT9611 + tristate "Lontium LT9611 DSI/HDMI bridge" + select SND_SOC_HDMI_CODEC if SND_SOC + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select REGMAP_I2C + help + Driver for Lontium LT9611 DSI to HDMI bridge + chip driver that converts dual DSI and I2S to + HDMI signals + Please say Y if you have such hardware. + +config DRM_LONTIUM_LT9611UXC + tristate "Lontium LT9611UXC DSI/HDMI bridge" + select SND_SOC_HDMI_CODEC if SND_SOC + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select REGMAP_I2C + help + Driver for Lontium LT9611UXC DSI to HDMI bridge + chip driver that converts dual DSI and I2S to + HDMI signals + Please say Y if you have such hardware. + +config DRM_ITE_IT66121 + tristate "ITE IT66121 HDMI bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + help + Support for ITE IT66121 HDMI bridge. + +config DRM_LVDS_CODEC + tristate "Transparent LVDS encoders and decoders support" + depends on OF + select DRM_KMS_HELPER + select DRM_PANEL_BRIDGE + help + Support for transparent LVDS encoders and decoders that don't + require any configuration. + +config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW + tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" + depends on OF + select DRM_KMS_HELPER + select DRM_PANEL + help + This is a driver for the display bridges of + GE B850v3 that convert dual channel LVDS + to DP++. This is used with the i.MX6 imx-ldb + driver. You are likely to say N here. + +config DRM_NWL_MIPI_DSI + tristate "Northwest Logic MIPI DSI Host controller" + depends on DRM + depends on COMMON_CLK + depends on OF && HAS_IOMEM + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select DRM_PANEL_BRIDGE + select GENERIC_PHY + select GENERIC_PHY_MIPI_DPHY + select MFD_SYSCON + select MULTIPLEXER + select REGMAP_MMIO + help + This enables the Northwest Logic MIPI DSI Host controller as + for example found on NXP's i.MX8 Processors. + +config DRM_NXP_PTN3460 + tristate "NXP PTN3460 DP/LVDS bridge" + depends on OF + select DRM_KMS_HELPER + select DRM_PANEL + help + NXP PTN3460 eDP-LVDS bridge chip driver. + +config DRM_PARADE_PS8622 + tristate "Parade eDP/LVDS bridge" + depends on OF + select DRM_PANEL + select DRM_KMS_HELPER + select BACKLIGHT_CLASS_DEVICE + help + Parade eDP-LVDS bridge chip driver. + +config DRM_PARADE_PS8640 + tristate "Parade PS8640 MIPI DSI to eDP Converter" + depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_DP_AUX_BUS + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select DRM_PANEL + help + Choose this option if you have PS8640 for display + The PS8640 is a high-performance and low-power + MIPI DSI to eDP converter + +config DRM_SAMSUNG_DSIM + tristate "Samsung MIPI DSIM bridge driver" + depends on COMMON_CLK + depends on OF && HAS_IOMEM + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select DRM_PANEL_BRIDGE + select GENERIC_PHY + select GENERIC_PHY_MIPI_DPHY + help + The Samsung MIPI DSIM bridge controller driver. + This MIPI DSIM bridge can be found it on Exynos SoCs and + NXP's i.MX8M Mini/Nano. + +config DRM_SIL_SII8620 + tristate "Silicon Image SII8620 HDMI/MHL bridge" + depends on OF + select DRM_KMS_HELPER + select EXTCON + depends on RC_CORE || !RC_CORE + help + Silicon Image SII8620 HDMI/MHL bridge chip driver. + +config DRM_SII902X + tristate "Silicon Image sii902x RGB/HDMI bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + select I2C_MUX + select SND_SOC_HDMI_CODEC if SND_SOC + help + Silicon Image sii902x bridge chip driver. + +config DRM_SII9234 + tristate "Silicon Image SII9234 HDMI/MHL bridge" + depends on OF + help + Say Y here if you want support for the MHL interface. + It is an I2C driver, that detects connection of MHL bridge + and starts encapsulation of HDMI signal. + +config DRM_SIMPLE_BRIDGE + tristate "Simple DRM bridge support" + depends on OF + select DRM_KMS_HELPER + help + Support for non-programmable DRM bridges, such as ADI ADV7123, TI + THS8134 and THS8135 or passive resistor ladder DACs. + +config DRM_THINE_THC63LVD1024 + tristate "Thine THC63LVD1024 LVDS decoder bridge" + depends on OF + help + Thine THC63LVD1024 LVDS/parallel converter driver. + +config DRM_TOSHIBA_TC358762 + tristate "TC358762 DSI/DPI bridge" + depends on OF + select DRM_MIPI_DSI + select DRM_KMS_HELPER + select DRM_PANEL_BRIDGE + help + Toshiba TC358762 DSI/DPI bridge driver. + +config DRM_TOSHIBA_TC358764 + tristate "TC358764 DSI/LVDS bridge" + depends on OF + select DRM_MIPI_DSI + select DRM_KMS_HELPER + select DRM_PANEL + help + Toshiba TC358764 DSI/LVDS bridge driver. + +config DRM_TOSHIBA_TC358767 + tristate "Toshiba TC358767 eDP bridge" + depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_MIPI_DSI + select DRM_PANEL + help + Toshiba TC358767 eDP bridge chip driver. + +config DRM_TOSHIBA_TC358768 + tristate "Toshiba TC358768 MIPI DSI bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + select DRM_MIPI_DSI + select VIDEOMODE_HELPERS + help + Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver. + +config DRM_TOSHIBA_TC358775 + tristate "Toshiba TC358775 DSI/LVDS bridge" + depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + select DRM_MIPI_DSI + help + Toshiba TC358775 DSI/LVDS bridge chip driver. + +config DRM_TI_DLPC3433 + tristate "TI DLPC3433 Display controller" + depends on DRM && DRM_PANEL + depends on OF + select DRM_MIPI_DSI + help + TI DLPC3433 is a MIPI DSI based display controller bridge + for processing high resolution DMD based projectors. + + It has a flexible configuration of MIPI DSI and DPI signal + input that produces a DMD output in RGB565, RGB666, RGB888 + formats. + + It supports up to 720p resolution with 60 and 120 Hz refresh + rates. + +config DRM_TI_TFP410 + tristate "TI TFP410 DVI/HDMI bridge" + depends on OF + select DRM_KMS_HELPER + help + Texas Instruments TFP410 DVI/HDMI Transmitter driver + +config DRM_TI_SN65DSI83 + tristate "TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + select DRM_MIPI_DSI + help + Texas Instruments SN65DSI83 and SN65DSI84 DSI to LVDS Bridge driver + +config DRM_TI_SN65DSI86 + tristate "TI SN65DSI86 DSI to eDP bridge" + depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + select DRM_MIPI_DSI + select AUXILIARY_BUS + select DRM_DP_AUX_BUS + help + Texas Instruments SN65DSI86 DSI to eDP Bridge driver + +config DRM_TI_TPD12S015 + tristate "TI TPD12S015 HDMI level shifter and ESD protection" + depends on OF + select DRM_KMS_HELPER + help + Texas Instruments TPD12S015 HDMI level shifter and ESD protection + driver. + +source "drivers/gpu/drm/bridge/analogix/Kconfig" + +source "drivers/gpu/drm/bridge/adv7511/Kconfig" + +source "drivers/gpu/drm/bridge/cadence/Kconfig" + +source "drivers/gpu/drm/bridge/imx/Kconfig" + +source "drivers/gpu/drm/bridge/synopsys/Kconfig" + +endmenu |