diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/gpu/drm/bridge/tc358775.c | 77 |
1 files changed, 52 insertions, 25 deletions
diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c index c737670631..3b7cc3be2c 100644 --- a/drivers/gpu/drm/bridge/tc358775.c +++ b/drivers/gpu/drm/bridge/tc358775.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/media-bus-format.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> @@ -107,6 +108,7 @@ #define RDPKTLN 0x0404 /* Command Read Packet Length */ #define VPCTRL 0x0450 /* Video Path Control */ +#define EVTMODE BIT(5) /* Video event mode enable, tc35876x only */ #define HTIM1 0x0454 /* Horizontal Timing Control 1 */ #define HTIM2 0x0458 /* Horizontal Timing Control 2 */ #define VTIM1 0x045C /* Vertical Timing Control 1 */ @@ -254,6 +256,11 @@ enum tc358775_ports { TC358775_LVDS_OUT1, }; +enum tc3587x5_type { + TC358765 = 0x65, + TC358775 = 0x75, +}; + struct tc_data { struct i2c_client *i2c; struct device *dev; @@ -271,6 +278,8 @@ struct tc_data { struct gpio_desc *stby_gpio; u8 lvds_link; /* single-link or dual-link */ u8 bpc; + + enum tc3587x5_type type; }; static inline struct tc_data *bridge_to_tc(struct drm_bridge *b) @@ -424,10 +433,16 @@ static void tc_bridge_enable(struct drm_bridge *bridge) d2l_write(tc->i2c, PPI_STARTPPI, PPI_START_FUNCTION); d2l_write(tc->i2c, DSI_STARTDSI, DSI_RX_START); + /* Video event mode vs pulse mode bit, does not exist for tc358775 */ + if (tc->type == TC358765) + val = EVTMODE; + else + val = 0; + if (tc->bpc == 8) - val = TC358775_VPCTRL_OPXLFMT(1); + val |= TC358775_VPCTRL_OPXLFMT(1); else /* bpc = 6; */ - val = TC358775_VPCTRL_MSF(1); + val |= TC358775_VPCTRL_MSF(1); dsiclk = mode->crtc_clock * 3 * tc->bpc / tc->num_dsi_lanes / 1000; clkdiv = dsiclk / (tc->lvds_link == DUAL_LINK ? DIVIDE_BY_6 : DIVIDE_BY_3); @@ -525,27 +540,24 @@ tc_mode_valid(struct drm_bridge *bridge, static int tc358775_parse_dt(struct device_node *np, struct tc_data *tc) { struct device_node *endpoint; - struct device_node *parent; struct device_node *remote; int dsi_lanes = -1; - /* - * To get the data-lanes of dsi, we need to access the dsi0_out of port1 - * of dsi0 endpoint from bridge port0 of d2l_in - */ endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, TC358775_DSI_IN, -1); - if (endpoint) { - /* dsi0_out node */ - parent = of_graph_get_remote_port_parent(endpoint); - of_node_put(endpoint); - if (parent) { - /* dsi0 port 1 */ - dsi_lanes = drm_of_get_data_lanes_count_ep(parent, 1, -1, 1, 4); - of_node_put(parent); - } + dsi_lanes = drm_of_get_data_lanes_count(endpoint, 1, 4); + + /* Quirk old dtb: Use data lanes from the DSI host side instead of bridge */ + if (dsi_lanes == -EINVAL || dsi_lanes == -ENODEV) { + remote = of_graph_get_remote_endpoint(endpoint); + dsi_lanes = drm_of_get_data_lanes_count(remote, 1, 4); + of_node_put(remote); + if (dsi_lanes >= 1) + dev_warn(tc->dev, "no dsi-lanes for the bridge, using host lanes\n"); } + of_node_put(endpoint); + if (dsi_lanes < 0) return dsi_lanes; @@ -620,7 +632,21 @@ static int tc_attach_host(struct tc_data *tc) dsi->lanes = tc->num_dsi_lanes; dsi->format = MIPI_DSI_FMT_RGB888; - dsi->mode_flags = MIPI_DSI_MODE_VIDEO; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM; + + /* + * The hs_rate and lp_rate are data rate values. The HS mode is + * differential, while the LP mode is single ended. As the HS mode + * uses DDR, the DSI clock frequency is half the hs_rate. The 10 Mbs + * data rate for LP mode is not specified in the bridge data sheet, + * but seems to be part of the MIPI DSI spec. + */ + if (tc->type == TC358765) + dsi->hs_rate = 800000000; + else + dsi->hs_rate = 1000000000; + dsi->lp_rate = 10000000; ret = devm_mipi_dsi_attach(dev, dsi); if (ret < 0) { @@ -643,6 +669,7 @@ static int tc_probe(struct i2c_client *client) tc->dev = dev; tc->i2c = client; + tc->type = (enum tc3587x5_type)(unsigned long)of_device_get_match_data(dev); tc->panel_bridge = devm_drm_of_get_bridge(dev, dev->of_node, TC358775_LVDS_OUT0, 0); @@ -667,12 +694,9 @@ static int tc_probe(struct i2c_client *client) return ret; } - tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH); - if (IS_ERR(tc->stby_gpio)) { - ret = PTR_ERR(tc->stby_gpio); - dev_err(dev, "cannot get stby-gpio %d\n", ret); - return ret; - } + tc->stby_gpio = devm_gpiod_get_optional(dev, "stby", GPIOD_OUT_HIGH); + if (IS_ERR(tc->stby_gpio)) + return PTR_ERR(tc->stby_gpio); tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(tc->reset_gpio)) { @@ -683,6 +707,7 @@ static int tc_probe(struct i2c_client *client) tc->bridge.funcs = &tc_bridge_funcs; tc->bridge.of_node = dev->of_node; + tc->bridge.pre_enable_prev_first = true; drm_bridge_add(&tc->bridge); i2c_set_clientdata(client, tc); @@ -706,13 +731,15 @@ static void tc_remove(struct i2c_client *client) } static const struct i2c_device_id tc358775_i2c_ids[] = { - { "tc358775", 0 }, + { "tc358765", TC358765, }, + { "tc358775", TC358775, }, { } }; MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids); static const struct of_device_id tc358775_of_ids[] = { - { .compatible = "toshiba,tc358775", }, + { .compatible = "toshiba,tc358765", .data = (void *)TC358765, }, + { .compatible = "toshiba,tc358775", .data = (void *)TC358775, }, { } }; MODULE_DEVICE_TABLE(of, tc358775_of_ids); |