diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_gmbus.c')
-rw-r--r-- | drivers/gpu/drm/i915/display/intel_gmbus.c | 998 |
1 files changed, 998 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_gmbus.c b/drivers/gpu/drm/i915/display/intel_gmbus.c new file mode 100644 index 0000000000..e95ddb580e --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_gmbus.c @@ -0,0 +1,998 @@ +/* + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * Copyright © 2006-2008,2010 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Chris Wilson <chris@chris-wilson.co.uk> + */ + +#include <linux/export.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> + +#include <drm/display/drm_hdcp_helper.h> + +#include "i915_drv.h" +#include "i915_irq.h" +#include "i915_reg.h" +#include "intel_de.h" +#include "intel_display_types.h" +#include "intel_gmbus.h" +#include "intel_gmbus_regs.h" + +struct intel_gmbus { + struct i2c_adapter adapter; +#define GMBUS_FORCE_BIT_RETRY (1U << 31) + u32 force_bit; + u32 reg0; + i915_reg_t gpio_reg; + struct i2c_algo_bit_data bit_algo; + struct drm_i915_private *i915; +}; + +enum gmbus_gpio { + GPIOA, + GPIOB, + GPIOC, + GPIOD, + GPIOE, + GPIOF, + GPIOG, + GPIOH, + __GPIOI_UNUSED, + GPIOJ, + GPIOK, + GPIOL, + GPIOM, + GPION, + GPIOO, +}; + +struct gmbus_pin { + const char *name; + enum gmbus_gpio gpio; +}; + +/* Map gmbus pin pairs to names and registers. */ +static const struct gmbus_pin gmbus_pins[] = { + [GMBUS_PIN_SSC] = { "ssc", GPIOB }, + [GMBUS_PIN_VGADDC] = { "vga", GPIOA }, + [GMBUS_PIN_PANEL] = { "panel", GPIOC }, + [GMBUS_PIN_DPC] = { "dpc", GPIOD }, + [GMBUS_PIN_DPB] = { "dpb", GPIOE }, + [GMBUS_PIN_DPD] = { "dpd", GPIOF }, +}; + +static const struct gmbus_pin gmbus_pins_bdw[] = { + [GMBUS_PIN_VGADDC] = { "vga", GPIOA }, + [GMBUS_PIN_DPC] = { "dpc", GPIOD }, + [GMBUS_PIN_DPB] = { "dpb", GPIOE }, + [GMBUS_PIN_DPD] = { "dpd", GPIOF }, +}; + +static const struct gmbus_pin gmbus_pins_skl[] = { + [GMBUS_PIN_DPC] = { "dpc", GPIOD }, + [GMBUS_PIN_DPB] = { "dpb", GPIOE }, + [GMBUS_PIN_DPD] = { "dpd", GPIOF }, +}; + +static const struct gmbus_pin gmbus_pins_bxt[] = { + [GMBUS_PIN_1_BXT] = { "dpb", GPIOB }, + [GMBUS_PIN_2_BXT] = { "dpc", GPIOC }, + [GMBUS_PIN_3_BXT] = { "misc", GPIOD }, +}; + +static const struct gmbus_pin gmbus_pins_cnp[] = { + [GMBUS_PIN_1_BXT] = { "dpb", GPIOB }, + [GMBUS_PIN_2_BXT] = { "dpc", GPIOC }, + [GMBUS_PIN_3_BXT] = { "misc", GPIOD }, + [GMBUS_PIN_4_CNP] = { "dpd", GPIOE }, +}; + +static const struct gmbus_pin gmbus_pins_icp[] = { + [GMBUS_PIN_1_BXT] = { "dpa", GPIOB }, + [GMBUS_PIN_2_BXT] = { "dpb", GPIOC }, + [GMBUS_PIN_3_BXT] = { "dpc", GPIOD }, + [GMBUS_PIN_9_TC1_ICP] = { "tc1", GPIOJ }, + [GMBUS_PIN_10_TC2_ICP] = { "tc2", GPIOK }, + [GMBUS_PIN_11_TC3_ICP] = { "tc3", GPIOL }, + [GMBUS_PIN_12_TC4_ICP] = { "tc4", GPIOM }, + [GMBUS_PIN_13_TC5_TGP] = { "tc5", GPION }, + [GMBUS_PIN_14_TC6_TGP] = { "tc6", GPIOO }, +}; + +static const struct gmbus_pin gmbus_pins_dg1[] = { + [GMBUS_PIN_1_BXT] = { "dpa", GPIOB }, + [GMBUS_PIN_2_BXT] = { "dpb", GPIOC }, + [GMBUS_PIN_3_BXT] = { "dpc", GPIOD }, + [GMBUS_PIN_4_CNP] = { "dpd", GPIOE }, +}; + +static const struct gmbus_pin gmbus_pins_dg2[] = { + [GMBUS_PIN_1_BXT] = { "dpa", GPIOB }, + [GMBUS_PIN_2_BXT] = { "dpb", GPIOC }, + [GMBUS_PIN_3_BXT] = { "dpc", GPIOD }, + [GMBUS_PIN_4_CNP] = { "dpd", GPIOE }, + [GMBUS_PIN_9_TC1_ICP] = { "tc1", GPIOJ }, +}; + +static const struct gmbus_pin gmbus_pins_mtp[] = { + [GMBUS_PIN_1_BXT] = { "dpa", GPIOB }, + [GMBUS_PIN_2_BXT] = { "dpb", GPIOC }, + [GMBUS_PIN_3_BXT] = { "dpc", GPIOD }, + [GMBUS_PIN_4_CNP] = { "dpd", GPIOE }, + [GMBUS_PIN_5_MTP] = { "dpe", GPIOF }, + [GMBUS_PIN_9_TC1_ICP] = { "tc1", GPIOJ }, + [GMBUS_PIN_10_TC2_ICP] = { "tc2", GPIOK }, + [GMBUS_PIN_11_TC3_ICP] = { "tc3", GPIOL }, + [GMBUS_PIN_12_TC4_ICP] = { "tc4", GPIOM }, +}; + +static const struct gmbus_pin *get_gmbus_pin(struct drm_i915_private *i915, + unsigned int pin) +{ + const struct gmbus_pin *pins; + size_t size; + + if (INTEL_PCH_TYPE(i915) >= PCH_DG2) { + pins = gmbus_pins_dg2; + size = ARRAY_SIZE(gmbus_pins_dg2); + } else if (INTEL_PCH_TYPE(i915) >= PCH_DG1) { + pins = gmbus_pins_dg1; + size = ARRAY_SIZE(gmbus_pins_dg1); + } else if (INTEL_PCH_TYPE(i915) >= PCH_MTP) { + pins = gmbus_pins_mtp; + size = ARRAY_SIZE(gmbus_pins_mtp); + } else if (INTEL_PCH_TYPE(i915) >= PCH_ICP) { + pins = gmbus_pins_icp; + size = ARRAY_SIZE(gmbus_pins_icp); + } else if (HAS_PCH_CNP(i915)) { + pins = gmbus_pins_cnp; + size = ARRAY_SIZE(gmbus_pins_cnp); + } else if (IS_GEMINILAKE(i915) || IS_BROXTON(i915)) { + pins = gmbus_pins_bxt; + size = ARRAY_SIZE(gmbus_pins_bxt); + } else if (DISPLAY_VER(i915) == 9) { + pins = gmbus_pins_skl; + size = ARRAY_SIZE(gmbus_pins_skl); + } else if (IS_BROADWELL(i915)) { + pins = gmbus_pins_bdw; + size = ARRAY_SIZE(gmbus_pins_bdw); + } else { + pins = gmbus_pins; + size = ARRAY_SIZE(gmbus_pins); + } + + if (pin >= size || !pins[pin].name) + return NULL; + + return &pins[pin]; +} + +bool intel_gmbus_is_valid_pin(struct drm_i915_private *i915, unsigned int pin) +{ + return get_gmbus_pin(i915, pin); +} + +/* Intel GPIO access functions */ + +#define I2C_RISEFALL_TIME 10 + +static inline struct intel_gmbus * +to_intel_gmbus(struct i2c_adapter *i2c) +{ + return container_of(i2c, struct intel_gmbus, adapter); +} + +void +intel_gmbus_reset(struct drm_i915_private *i915) +{ + intel_de_write(i915, GMBUS0(i915), 0); + intel_de_write(i915, GMBUS4(i915), 0); +} + +static void pnv_gmbus_clock_gating(struct drm_i915_private *i915, + bool enable) +{ + /* When using bit bashing for I2C, this bit needs to be set to 1 */ + intel_de_rmw(i915, DSPCLK_GATE_D(i915), PNV_GMBUSUNIT_CLOCK_GATE_DISABLE, + !enable ? PNV_GMBUSUNIT_CLOCK_GATE_DISABLE : 0); +} + +static void pch_gmbus_clock_gating(struct drm_i915_private *i915, + bool enable) +{ + intel_de_rmw(i915, SOUTH_DSPCLK_GATE_D, PCH_GMBUSUNIT_CLOCK_GATE_DISABLE, + !enable ? PCH_GMBUSUNIT_CLOCK_GATE_DISABLE : 0); +} + +static void bxt_gmbus_clock_gating(struct drm_i915_private *i915, + bool enable) +{ + intel_de_rmw(i915, GEN9_CLKGATE_DIS_4, BXT_GMBUS_GATING_DIS, + !enable ? BXT_GMBUS_GATING_DIS : 0); +} + +static u32 get_reserved(struct intel_gmbus *bus) +{ + struct drm_i915_private *i915 = bus->i915; + u32 reserved = 0; + + /* On most chips, these bits must be preserved in software. */ + if (!IS_I830(i915) && !IS_I845G(i915)) + reserved = intel_de_read_notrace(i915, bus->gpio_reg) & + (GPIO_DATA_PULLUP_DISABLE | GPIO_CLOCK_PULLUP_DISABLE); + + return reserved; +} + +static int get_clock(void *data) +{ + struct intel_gmbus *bus = data; + struct drm_i915_private *i915 = bus->i915; + u32 reserved = get_reserved(bus); + + intel_de_write_notrace(i915, bus->gpio_reg, reserved | GPIO_CLOCK_DIR_MASK); + intel_de_write_notrace(i915, bus->gpio_reg, reserved); + + return (intel_de_read_notrace(i915, bus->gpio_reg) & GPIO_CLOCK_VAL_IN) != 0; +} + +static int get_data(void *data) +{ + struct intel_gmbus *bus = data; + struct drm_i915_private *i915 = bus->i915; + u32 reserved = get_reserved(bus); + + intel_de_write_notrace(i915, bus->gpio_reg, reserved | GPIO_DATA_DIR_MASK); + intel_de_write_notrace(i915, bus->gpio_reg, reserved); + + return (intel_de_read_notrace(i915, bus->gpio_reg) & GPIO_DATA_VAL_IN) != 0; +} + +static void set_clock(void *data, int state_high) +{ + struct intel_gmbus *bus = data; + struct drm_i915_private *i915 = bus->i915; + u32 reserved = get_reserved(bus); + u32 clock_bits; + + if (state_high) + clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK; + else + clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK | + GPIO_CLOCK_VAL_MASK; + + intel_de_write_notrace(i915, bus->gpio_reg, reserved | clock_bits); + intel_de_posting_read(i915, bus->gpio_reg); +} + +static void set_data(void *data, int state_high) +{ + struct intel_gmbus *bus = data; + struct drm_i915_private *i915 = bus->i915; + u32 reserved = get_reserved(bus); + u32 data_bits; + + if (state_high) + data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; + else + data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK | + GPIO_DATA_VAL_MASK; + + intel_de_write_notrace(i915, bus->gpio_reg, reserved | data_bits); + intel_de_posting_read(i915, bus->gpio_reg); +} + +static int +intel_gpio_pre_xfer(struct i2c_adapter *adapter) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + struct drm_i915_private *i915 = bus->i915; + + intel_gmbus_reset(i915); + + if (IS_PINEVIEW(i915)) + pnv_gmbus_clock_gating(i915, false); + + set_data(bus, 1); + set_clock(bus, 1); + udelay(I2C_RISEFALL_TIME); + return 0; +} + +static void +intel_gpio_post_xfer(struct i2c_adapter *adapter) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + struct drm_i915_private *i915 = bus->i915; + + set_data(bus, 1); + set_clock(bus, 1); + + if (IS_PINEVIEW(i915)) + pnv_gmbus_clock_gating(i915, true); +} + +static void +intel_gpio_setup(struct intel_gmbus *bus, i915_reg_t gpio_reg) +{ + struct i2c_algo_bit_data *algo; + + algo = &bus->bit_algo; + + bus->gpio_reg = gpio_reg; + bus->adapter.algo_data = algo; + algo->setsda = set_data; + algo->setscl = set_clock; + algo->getsda = get_data; + algo->getscl = get_clock; + algo->pre_xfer = intel_gpio_pre_xfer; + algo->post_xfer = intel_gpio_post_xfer; + algo->udelay = I2C_RISEFALL_TIME; + algo->timeout = usecs_to_jiffies(2200); + algo->data = bus; +} + +static bool has_gmbus_irq(struct drm_i915_private *i915) +{ + /* + * encoder->shutdown() may want to use GMBUS + * after irqs have already been disabled. + */ + return HAS_GMBUS_IRQ(i915) && intel_irqs_enabled(i915); +} + +static int gmbus_wait(struct drm_i915_private *i915, u32 status, u32 irq_en) +{ + DEFINE_WAIT(wait); + u32 gmbus2; + int ret; + + /* Important: The hw handles only the first bit, so set only one! Since + * we also need to check for NAKs besides the hw ready/idle signal, we + * need to wake up periodically and check that ourselves. + */ + if (!has_gmbus_irq(i915)) + irq_en = 0; + + add_wait_queue(&i915->display.gmbus.wait_queue, &wait); + intel_de_write_fw(i915, GMBUS4(i915), irq_en); + + status |= GMBUS_SATOER; + ret = wait_for_us((gmbus2 = intel_de_read_fw(i915, GMBUS2(i915))) & status, + 2); + if (ret) + ret = wait_for((gmbus2 = intel_de_read_fw(i915, GMBUS2(i915))) & status, + 50); + + intel_de_write_fw(i915, GMBUS4(i915), 0); + remove_wait_queue(&i915->display.gmbus.wait_queue, &wait); + + if (gmbus2 & GMBUS_SATOER) + return -ENXIO; + + return ret; +} + +static int +gmbus_wait_idle(struct drm_i915_private *i915) +{ + DEFINE_WAIT(wait); + u32 irq_enable; + int ret; + + /* Important: The hw handles only the first bit, so set only one! */ + irq_enable = 0; + if (has_gmbus_irq(i915)) + irq_enable = GMBUS_IDLE_EN; + + add_wait_queue(&i915->display.gmbus.wait_queue, &wait); + intel_de_write_fw(i915, GMBUS4(i915), irq_enable); + + ret = intel_de_wait_for_register_fw(i915, GMBUS2(i915), GMBUS_ACTIVE, 0, 10); + + intel_de_write_fw(i915, GMBUS4(i915), 0); + remove_wait_queue(&i915->display.gmbus.wait_queue, &wait); + + return ret; +} + +static unsigned int gmbus_max_xfer_size(struct drm_i915_private *i915) +{ + return DISPLAY_VER(i915) >= 9 ? GEN9_GMBUS_BYTE_COUNT_MAX : + GMBUS_BYTE_COUNT_MAX; +} + +static int +gmbus_xfer_read_chunk(struct drm_i915_private *i915, + unsigned short addr, u8 *buf, unsigned int len, + u32 gmbus0_reg, u32 gmbus1_index) +{ + unsigned int size = len; + bool burst_read = len > gmbus_max_xfer_size(i915); + bool extra_byte_added = false; + + if (burst_read) { + /* + * As per HW Spec, for 512Bytes need to read extra Byte and + * Ignore the extra byte read. + */ + if (len == 512) { + extra_byte_added = true; + len++; + } + size = len % 256 + 256; + intel_de_write_fw(i915, GMBUS0(i915), + gmbus0_reg | GMBUS_BYTE_CNT_OVERRIDE); + } + + intel_de_write_fw(i915, GMBUS1(i915), + gmbus1_index | GMBUS_CYCLE_WAIT | (size << GMBUS_BYTE_COUNT_SHIFT) | (addr << GMBUS_SLAVE_ADDR_SHIFT) | GMBUS_SLAVE_READ | GMBUS_SW_RDY); + while (len) { + int ret; + u32 val, loop = 0; + + ret = gmbus_wait(i915, GMBUS_HW_RDY, GMBUS_HW_RDY_EN); + if (ret) + return ret; + + val = intel_de_read_fw(i915, GMBUS3(i915)); + do { + if (extra_byte_added && len == 1) + break; + + *buf++ = val & 0xff; + val >>= 8; + } while (--len && ++loop < 4); + + if (burst_read && len == size - 4) + /* Reset the override bit */ + intel_de_write_fw(i915, GMBUS0(i915), gmbus0_reg); + } + + return 0; +} + +/* + * HW spec says that 512Bytes in Burst read need special treatment. + * But it doesn't talk about other multiple of 256Bytes. And couldn't locate + * an I2C slave, which supports such a lengthy burst read too for experiments. + * + * So until things get clarified on HW support, to avoid the burst read length + * in fold of 256Bytes except 512, max burst read length is fixed at 767Bytes. + */ +#define INTEL_GMBUS_BURST_READ_MAX_LEN 767U + +static int +gmbus_xfer_read(struct drm_i915_private *i915, struct i2c_msg *msg, + u32 gmbus0_reg, u32 gmbus1_index) +{ + u8 *buf = msg->buf; + unsigned int rx_size = msg->len; + unsigned int len; + int ret; + + do { + if (HAS_GMBUS_BURST_READ(i915)) + len = min(rx_size, INTEL_GMBUS_BURST_READ_MAX_LEN); + else + len = min(rx_size, gmbus_max_xfer_size(i915)); + + ret = gmbus_xfer_read_chunk(i915, msg->addr, buf, len, + gmbus0_reg, gmbus1_index); + if (ret) + return ret; + + rx_size -= len; + buf += len; + } while (rx_size != 0); + + return 0; +} + +static int +gmbus_xfer_write_chunk(struct drm_i915_private *i915, + unsigned short addr, u8 *buf, unsigned int len, + u32 gmbus1_index) +{ + unsigned int chunk_size = len; + u32 val, loop; + + val = loop = 0; + while (len && loop < 4) { + val |= *buf++ << (8 * loop++); + len -= 1; + } + + intel_de_write_fw(i915, GMBUS3(i915), val); + intel_de_write_fw(i915, GMBUS1(i915), + gmbus1_index | GMBUS_CYCLE_WAIT | (chunk_size << GMBUS_BYTE_COUNT_SHIFT) | (addr << GMBUS_SLAVE_ADDR_SHIFT) | GMBUS_SLAVE_WRITE | GMBUS_SW_RDY); + while (len) { + int ret; + + val = loop = 0; + do { + val |= *buf++ << (8 * loop); + } while (--len && ++loop < 4); + + intel_de_write_fw(i915, GMBUS3(i915), val); + + ret = gmbus_wait(i915, GMBUS_HW_RDY, GMBUS_HW_RDY_EN); + if (ret) + return ret; + } + + return 0; +} + +static int +gmbus_xfer_write(struct drm_i915_private *i915, struct i2c_msg *msg, + u32 gmbus1_index) +{ + u8 *buf = msg->buf; + unsigned int tx_size = msg->len; + unsigned int len; + int ret; + + do { + len = min(tx_size, gmbus_max_xfer_size(i915)); + + ret = gmbus_xfer_write_chunk(i915, msg->addr, buf, len, + gmbus1_index); + if (ret) + return ret; + + buf += len; + tx_size -= len; + } while (tx_size != 0); + + return 0; +} + +/* + * The gmbus controller can combine a 1 or 2 byte write with another read/write + * that immediately follows it by using an "INDEX" cycle. + */ +static bool +gmbus_is_index_xfer(struct i2c_msg *msgs, int i, int num) +{ + return (i + 1 < num && + msgs[i].addr == msgs[i + 1].addr && + !(msgs[i].flags & I2C_M_RD) && + (msgs[i].len == 1 || msgs[i].len == 2) && + msgs[i + 1].len > 0); +} + +static int +gmbus_index_xfer(struct drm_i915_private *i915, struct i2c_msg *msgs, + u32 gmbus0_reg) +{ + u32 gmbus1_index = 0; + u32 gmbus5 = 0; + int ret; + + if (msgs[0].len == 2) + gmbus5 = GMBUS_2BYTE_INDEX_EN | + msgs[0].buf[1] | (msgs[0].buf[0] << 8); + if (msgs[0].len == 1) + gmbus1_index = GMBUS_CYCLE_INDEX | + (msgs[0].buf[0] << GMBUS_SLAVE_INDEX_SHIFT); + + /* GMBUS5 holds 16-bit index */ + if (gmbus5) + intel_de_write_fw(i915, GMBUS5(i915), gmbus5); + + if (msgs[1].flags & I2C_M_RD) + ret = gmbus_xfer_read(i915, &msgs[1], gmbus0_reg, + gmbus1_index); + else + ret = gmbus_xfer_write(i915, &msgs[1], gmbus1_index); + + /* Clear GMBUS5 after each index transfer */ + if (gmbus5) + intel_de_write_fw(i915, GMBUS5(i915), 0); + + return ret; +} + +static int +do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num, + u32 gmbus0_source) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + struct drm_i915_private *i915 = bus->i915; + int i = 0, inc, try = 0; + int ret = 0; + + /* Display WA #0868: skl,bxt,kbl,cfl,glk */ + if (IS_GEMINILAKE(i915) || IS_BROXTON(i915)) + bxt_gmbus_clock_gating(i915, false); + else if (HAS_PCH_SPT(i915) || HAS_PCH_CNP(i915)) + pch_gmbus_clock_gating(i915, false); + +retry: + intel_de_write_fw(i915, GMBUS0(i915), gmbus0_source | bus->reg0); + + for (; i < num; i += inc) { + inc = 1; + if (gmbus_is_index_xfer(msgs, i, num)) { + ret = gmbus_index_xfer(i915, &msgs[i], + gmbus0_source | bus->reg0); + inc = 2; /* an index transmission is two msgs */ + } else if (msgs[i].flags & I2C_M_RD) { + ret = gmbus_xfer_read(i915, &msgs[i], + gmbus0_source | bus->reg0, 0); + } else { + ret = gmbus_xfer_write(i915, &msgs[i], 0); + } + + if (!ret) + ret = gmbus_wait(i915, + GMBUS_HW_WAIT_PHASE, GMBUS_HW_WAIT_EN); + if (ret == -ETIMEDOUT) + goto timeout; + else if (ret) + goto clear_err; + } + + /* Generate a STOP condition on the bus. Note that gmbus can't generata + * a STOP on the very first cycle. To simplify the code we + * unconditionally generate the STOP condition with an additional gmbus + * cycle. */ + intel_de_write_fw(i915, GMBUS1(i915), GMBUS_CYCLE_STOP | GMBUS_SW_RDY); + + /* Mark the GMBUS interface as disabled after waiting for idle. + * We will re-enable it at the start of the next xfer, + * till then let it sleep. + */ + if (gmbus_wait_idle(i915)) { + drm_dbg_kms(&i915->drm, + "GMBUS [%s] timed out waiting for idle\n", + adapter->name); + ret = -ETIMEDOUT; + } + intel_de_write_fw(i915, GMBUS0(i915), 0); + ret = ret ?: i; + goto out; + +clear_err: + /* + * Wait for bus to IDLE before clearing NAK. + * If we clear the NAK while bus is still active, then it will stay + * active and the next transaction may fail. + * + * If no ACK is received during the address phase of a transaction, the + * adapter must report -ENXIO. It is not clear what to return if no ACK + * is received at other times. But we have to be careful to not return + * spurious -ENXIO because that will prevent i2c and drm edid functions + * from retrying. So return -ENXIO only when gmbus properly quiescents - + * timing out seems to happen when there _is_ a ddc chip present, but + * it's slow responding and only answers on the 2nd retry. + */ + ret = -ENXIO; + if (gmbus_wait_idle(i915)) { + drm_dbg_kms(&i915->drm, + "GMBUS [%s] timed out after NAK\n", + adapter->name); + ret = -ETIMEDOUT; + } + + /* Toggle the Software Clear Interrupt bit. This has the effect + * of resetting the GMBUS controller and so clearing the + * BUS_ERROR raised by the slave's NAK. + */ + intel_de_write_fw(i915, GMBUS1(i915), GMBUS_SW_CLR_INT); + intel_de_write_fw(i915, GMBUS1(i915), 0); + intel_de_write_fw(i915, GMBUS0(i915), 0); + + drm_dbg_kms(&i915->drm, "GMBUS [%s] NAK for addr: %04x %c(%d)\n", + adapter->name, msgs[i].addr, + (msgs[i].flags & I2C_M_RD) ? 'r' : 'w', msgs[i].len); + + /* + * Passive adapters sometimes NAK the first probe. Retry the first + * message once on -ENXIO for GMBUS transfers; the bit banging algorithm + * has retries internally. See also the retry loop in + * drm_do_probe_ddc_edid, which bails out on the first -ENXIO. + */ + if (ret == -ENXIO && i == 0 && try++ == 0) { + drm_dbg_kms(&i915->drm, + "GMBUS [%s] NAK on first message, retry\n", + adapter->name); + goto retry; + } + + goto out; + +timeout: + drm_dbg_kms(&i915->drm, + "GMBUS [%s] timed out, falling back to bit banging on pin %d\n", + bus->adapter.name, bus->reg0 & 0xff); + intel_de_write_fw(i915, GMBUS0(i915), 0); + + /* + * Hardware may not support GMBUS over these pins? Try GPIO bitbanging + * instead. Use EAGAIN to have i2c core retry. + */ + ret = -EAGAIN; + +out: + /* Display WA #0868: skl,bxt,kbl,cfl,glk */ + if (IS_GEMINILAKE(i915) || IS_BROXTON(i915)) + bxt_gmbus_clock_gating(i915, true); + else if (HAS_PCH_SPT(i915) || HAS_PCH_CNP(i915)) + pch_gmbus_clock_gating(i915, true); + + return ret; +} + +static int +gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + struct drm_i915_private *i915 = bus->i915; + intel_wakeref_t wakeref; + int ret; + + wakeref = intel_display_power_get(i915, POWER_DOMAIN_GMBUS); + + if (bus->force_bit) { + ret = i2c_bit_algo.master_xfer(adapter, msgs, num); + if (ret < 0) + bus->force_bit &= ~GMBUS_FORCE_BIT_RETRY; + } else { + ret = do_gmbus_xfer(adapter, msgs, num, 0); + if (ret == -EAGAIN) + bus->force_bit |= GMBUS_FORCE_BIT_RETRY; + } + + intel_display_power_put(i915, POWER_DOMAIN_GMBUS, wakeref); + + return ret; +} + +int intel_gmbus_output_aksv(struct i2c_adapter *adapter) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + struct drm_i915_private *i915 = bus->i915; + u8 cmd = DRM_HDCP_DDC_AKSV; + u8 buf[DRM_HDCP_KSV_LEN] = { 0 }; + struct i2c_msg msgs[] = { + { + .addr = DRM_HDCP_DDC_ADDR, + .flags = 0, + .len = sizeof(cmd), + .buf = &cmd, + }, + { + .addr = DRM_HDCP_DDC_ADDR, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + intel_wakeref_t wakeref; + int ret; + + wakeref = intel_display_power_get(i915, POWER_DOMAIN_GMBUS); + mutex_lock(&i915->display.gmbus.mutex); + + /* + * In order to output Aksv to the receiver, use an indexed write to + * pass the i2c command, and tell GMBUS to use the HW-provided value + * instead of sourcing GMBUS3 for the data. + */ + ret = do_gmbus_xfer(adapter, msgs, ARRAY_SIZE(msgs), GMBUS_AKSV_SELECT); + + mutex_unlock(&i915->display.gmbus.mutex); + intel_display_power_put(i915, POWER_DOMAIN_GMBUS, wakeref); + + return ret; +} + +static u32 gmbus_func(struct i2c_adapter *adapter) +{ + return i2c_bit_algo.functionality(adapter) & + (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + /* I2C_FUNC_10BIT_ADDR | */ + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL); +} + +static const struct i2c_algorithm gmbus_algorithm = { + .master_xfer = gmbus_xfer, + .functionality = gmbus_func +}; + +static void gmbus_lock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + struct drm_i915_private *i915 = bus->i915; + + mutex_lock(&i915->display.gmbus.mutex); +} + +static int gmbus_trylock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + struct drm_i915_private *i915 = bus->i915; + + return mutex_trylock(&i915->display.gmbus.mutex); +} + +static void gmbus_unlock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + struct drm_i915_private *i915 = bus->i915; + + mutex_unlock(&i915->display.gmbus.mutex); +} + +static const struct i2c_lock_operations gmbus_lock_ops = { + .lock_bus = gmbus_lock_bus, + .trylock_bus = gmbus_trylock_bus, + .unlock_bus = gmbus_unlock_bus, +}; + +/** + * intel_gmbus_setup - instantiate all Intel i2c GMBuses + * @i915: i915 device private + */ +int intel_gmbus_setup(struct drm_i915_private *i915) +{ + struct pci_dev *pdev = to_pci_dev(i915->drm.dev); + unsigned int pin; + int ret; + + if (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)) + i915->display.gmbus.mmio_base = VLV_DISPLAY_BASE; + else if (!HAS_GMCH(i915)) + /* + * Broxton uses the same PCH offsets for South Display Engine, + * even though it doesn't have a PCH. + */ + i915->display.gmbus.mmio_base = PCH_DISPLAY_BASE; + + mutex_init(&i915->display.gmbus.mutex); + init_waitqueue_head(&i915->display.gmbus.wait_queue); + + for (pin = 0; pin < ARRAY_SIZE(i915->display.gmbus.bus); pin++) { + const struct gmbus_pin *gmbus_pin; + struct intel_gmbus *bus; + + gmbus_pin = get_gmbus_pin(i915, pin); + if (!gmbus_pin) + continue; + + bus = kzalloc(sizeof(*bus), GFP_KERNEL); + if (!bus) { + ret = -ENOMEM; + goto err; + } + + bus->adapter.owner = THIS_MODULE; + bus->adapter.class = I2C_CLASS_DDC; + snprintf(bus->adapter.name, + sizeof(bus->adapter.name), + "i915 gmbus %s", gmbus_pin->name); + + bus->adapter.dev.parent = &pdev->dev; + bus->i915 = i915; + + bus->adapter.algo = &gmbus_algorithm; + bus->adapter.lock_ops = &gmbus_lock_ops; + + /* + * We wish to retry with bit banging + * after a timed out GMBUS attempt. + */ + bus->adapter.retries = 1; + + /* By default use a conservative clock rate */ + bus->reg0 = pin | GMBUS_RATE_100KHZ; + + /* gmbus seems to be broken on i830 */ + if (IS_I830(i915)) + bus->force_bit = 1; + + intel_gpio_setup(bus, GPIO(i915, gmbus_pin->gpio)); + + ret = i2c_add_adapter(&bus->adapter); + if (ret) { + kfree(bus); + goto err; + } + + i915->display.gmbus.bus[pin] = bus; + } + + intel_gmbus_reset(i915); + + return 0; + +err: + intel_gmbus_teardown(i915); + + return ret; +} + +struct i2c_adapter *intel_gmbus_get_adapter(struct drm_i915_private *i915, + unsigned int pin) +{ + if (drm_WARN_ON(&i915->drm, pin >= ARRAY_SIZE(i915->display.gmbus.bus) || + !i915->display.gmbus.bus[pin])) + return NULL; + + return &i915->display.gmbus.bus[pin]->adapter; +} + +void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + struct drm_i915_private *i915 = bus->i915; + + mutex_lock(&i915->display.gmbus.mutex); + + bus->force_bit += force_bit ? 1 : -1; + drm_dbg_kms(&i915->drm, + "%sabling bit-banging on %s. force bit now %d\n", + force_bit ? "en" : "dis", adapter->name, + bus->force_bit); + + mutex_unlock(&i915->display.gmbus.mutex); +} + +bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + + return bus->force_bit; +} + +void intel_gmbus_teardown(struct drm_i915_private *i915) +{ + unsigned int pin; + + for (pin = 0; pin < ARRAY_SIZE(i915->display.gmbus.bus); pin++) { + struct intel_gmbus *bus; + + bus = i915->display.gmbus.bus[pin]; + if (!bus) + continue; + + i2c_del_adapter(&bus->adapter); + + kfree(bus); + i915->display.gmbus.bus[pin] = NULL; + } +} + +void intel_gmbus_irq_handler(struct drm_i915_private *i915) +{ + wake_up_all(&i915->display.gmbus.wait_queue); +} |