diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_hotplug.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_hotplug.c | 971 |
1 files changed, 971 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c new file mode 100644 index 000000000..69a83dcc1 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_hotplug.c @@ -0,0 +1,971 @@ +/* + * Copyright © 2015 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#include <linux/kernel.h> + +#include "i915_drv.h" +#include "i915_irq.h" +#include "intel_display_types.h" +#include "intel_hotplug.h" +#include "intel_hotplug_irq.h" + +/** + * DOC: Hotplug + * + * Simply put, hotplug occurs when a display is connected to or disconnected + * from the system. However, there may be adapters and docking stations and + * Display Port short pulses and MST devices involved, complicating matters. + * + * Hotplug in i915 is handled in many different levels of abstraction. + * + * The platform dependent interrupt handling code in i915_irq.c enables, + * disables, and does preliminary handling of the interrupts. The interrupt + * handlers gather the hotplug detect (HPD) information from relevant registers + * into a platform independent mask of hotplug pins that have fired. + * + * The platform independent interrupt handler intel_hpd_irq_handler() in + * intel_hotplug.c does hotplug irq storm detection and mitigation, and passes + * further processing to appropriate bottom halves (Display Port specific and + * regular hotplug). + * + * The Display Port work function i915_digport_work_func() calls into + * intel_dp_hpd_pulse() via hooks, which handles DP short pulses and DP MST long + * pulses, with failures and non-MST long pulses triggering regular hotplug + * processing on the connector. + * + * The regular hotplug work function i915_hotplug_work_func() calls connector + * detect hooks, and, if connector status changes, triggers sending of hotplug + * uevent to userspace via drm_kms_helper_hotplug_event(). + * + * Finally, the userspace is responsible for triggering a modeset upon receiving + * the hotplug uevent, disabling or enabling the crtc as needed. + * + * The hotplug interrupt storm detection and mitigation code keeps track of the + * number of interrupts per hotplug pin per a period of time, and if the number + * of interrupts exceeds a certain threshold, the interrupt is disabled for a + * while before being re-enabled. The intention is to mitigate issues raising + * from broken hardware triggering massive amounts of interrupts and grinding + * the system to a halt. + * + * Current implementation expects that hotplug interrupt storm will not be + * seen when display port sink is connected, hence on platforms whose DP + * callback is handled by i915_digport_work_func reenabling of hpd is not + * performed (it was never expected to be disabled in the first place ;) ) + * this is specific to DP sinks handled by this routine and any other display + * such as HDMI or DVI enabled on the same port will have proper logic since + * it will use i915_hotplug_work_func where this logic is handled. + */ + +/** + * intel_hpd_pin_default - return default pin associated with certain port. + * @dev_priv: private driver data pointer + * @port: the hpd port to get associated pin + * + * It is only valid and used by digital port encoder. + * + * Return pin that is associatade with @port. + */ +enum hpd_pin intel_hpd_pin_default(struct drm_i915_private *dev_priv, + enum port port) +{ + return HPD_PORT_A + port - PORT_A; +} + +/* Threshold == 5 for long IRQs, 50 for short */ +#define HPD_STORM_DEFAULT_THRESHOLD 50 + +#define HPD_STORM_DETECT_PERIOD 1000 +#define HPD_STORM_REENABLE_DELAY (2 * 60 * 1000) +#define HPD_RETRY_DELAY 1000 + +static enum hpd_pin +intel_connector_hpd_pin(struct intel_connector *connector) +{ + struct intel_encoder *encoder = intel_attached_encoder(connector); + + /* + * MST connectors get their encoder attached dynamically + * so need to make sure we have an encoder here. But since + * MST encoders have their hpd_pin set to HPD_NONE we don't + * have to special case them beyond that. + */ + return encoder ? encoder->hpd_pin : HPD_NONE; +} + +/** + * intel_hpd_irq_storm_detect - gather stats and detect HPD IRQ storm on a pin + * @dev_priv: private driver data pointer + * @pin: the pin to gather stats on + * @long_hpd: whether the HPD IRQ was long or short + * + * Gather stats about HPD IRQs from the specified @pin, and detect IRQ + * storms. Only the pin specific stats and state are changed, the caller is + * responsible for further action. + * + * The number of IRQs that are allowed within @HPD_STORM_DETECT_PERIOD is + * stored in @dev_priv->display.hotplug.hpd_storm_threshold which defaults to + * @HPD_STORM_DEFAULT_THRESHOLD. Long IRQs count as +10 to this threshold, and + * short IRQs count as +1. If this threshold is exceeded, it's considered an + * IRQ storm and the IRQ state is set to @HPD_MARK_DISABLED. + * + * By default, most systems will only count long IRQs towards + * &dev_priv->display.hotplug.hpd_storm_threshold. However, some older systems also + * suffer from short IRQ storms and must also track these. Because short IRQ + * storms are naturally caused by sideband interactions with DP MST devices, + * short IRQ detection is only enabled for systems without DP MST support. + * Systems which are new enough to support DP MST are far less likely to + * suffer from IRQ storms at all, so this is fine. + * + * The HPD threshold can be controlled through i915_hpd_storm_ctl in debugfs, + * and should only be adjusted for automated hotplug testing. + * + * Return true if an IRQ storm was detected on @pin. + */ +static bool intel_hpd_irq_storm_detect(struct drm_i915_private *dev_priv, + enum hpd_pin pin, bool long_hpd) +{ + struct intel_hotplug *hpd = &dev_priv->display.hotplug; + unsigned long start = hpd->stats[pin].last_jiffies; + unsigned long end = start + msecs_to_jiffies(HPD_STORM_DETECT_PERIOD); + const int increment = long_hpd ? 10 : 1; + const int threshold = hpd->hpd_storm_threshold; + bool storm = false; + + if (!threshold || + (!long_hpd && !dev_priv->display.hotplug.hpd_short_storm_enabled)) + return false; + + if (!time_in_range(jiffies, start, end)) { + hpd->stats[pin].last_jiffies = jiffies; + hpd->stats[pin].count = 0; + } + + hpd->stats[pin].count += increment; + if (hpd->stats[pin].count > threshold) { + hpd->stats[pin].state = HPD_MARK_DISABLED; + drm_dbg_kms(&dev_priv->drm, + "HPD interrupt storm detected on PIN %d\n", pin); + storm = true; + } else { + drm_dbg_kms(&dev_priv->drm, + "Received HPD interrupt on PIN %d - cnt: %d\n", + pin, + hpd->stats[pin].count); + } + + return storm; +} + +static void +intel_hpd_irq_storm_switch_to_polling(struct drm_i915_private *dev_priv) +{ + struct drm_connector_list_iter conn_iter; + struct intel_connector *connector; + bool hpd_disabled = false; + + lockdep_assert_held(&dev_priv->irq_lock); + + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); + for_each_intel_connector_iter(connector, &conn_iter) { + enum hpd_pin pin; + + if (connector->base.polled != DRM_CONNECTOR_POLL_HPD) + continue; + + pin = intel_connector_hpd_pin(connector); + if (pin == HPD_NONE || + dev_priv->display.hotplug.stats[pin].state != HPD_MARK_DISABLED) + continue; + + drm_info(&dev_priv->drm, + "HPD interrupt storm detected on connector %s: " + "switching from hotplug detection to polling\n", + connector->base.name); + + dev_priv->display.hotplug.stats[pin].state = HPD_DISABLED; + connector->base.polled = DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT; + hpd_disabled = true; + } + drm_connector_list_iter_end(&conn_iter); + + /* Enable polling and queue hotplug re-enabling. */ + if (hpd_disabled) { + drm_kms_helper_poll_reschedule(&dev_priv->drm); + mod_delayed_work(dev_priv->unordered_wq, + &dev_priv->display.hotplug.reenable_work, + msecs_to_jiffies(HPD_STORM_REENABLE_DELAY)); + } +} + +static void intel_hpd_irq_storm_reenable_work(struct work_struct *work) +{ + struct drm_i915_private *dev_priv = + container_of(work, typeof(*dev_priv), + display.hotplug.reenable_work.work); + struct drm_connector_list_iter conn_iter; + struct intel_connector *connector; + intel_wakeref_t wakeref; + enum hpd_pin pin; + + wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm); + + spin_lock_irq(&dev_priv->irq_lock); + + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); + for_each_intel_connector_iter(connector, &conn_iter) { + pin = intel_connector_hpd_pin(connector); + if (pin == HPD_NONE || + dev_priv->display.hotplug.stats[pin].state != HPD_DISABLED) + continue; + + if (connector->base.polled != connector->polled) + drm_dbg(&dev_priv->drm, + "Reenabling HPD on connector %s\n", + connector->base.name); + connector->base.polled = connector->polled; + } + drm_connector_list_iter_end(&conn_iter); + + for_each_hpd_pin(pin) { + if (dev_priv->display.hotplug.stats[pin].state == HPD_DISABLED) + dev_priv->display.hotplug.stats[pin].state = HPD_ENABLED; + } + + intel_hpd_irq_setup(dev_priv); + + spin_unlock_irq(&dev_priv->irq_lock); + + intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref); +} + +enum intel_hotplug_state +intel_encoder_hotplug(struct intel_encoder *encoder, + struct intel_connector *connector) +{ + struct drm_device *dev = connector->base.dev; + enum drm_connector_status old_status; + u64 old_epoch_counter; + bool ret = false; + + drm_WARN_ON(dev, !mutex_is_locked(&dev->mode_config.mutex)); + old_status = connector->base.status; + old_epoch_counter = connector->base.epoch_counter; + + connector->base.status = + drm_helper_probe_detect(&connector->base, NULL, false); + + if (old_epoch_counter != connector->base.epoch_counter) + ret = true; + + if (ret) { + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] status updated from %s to %s (epoch counter %llu->%llu)\n", + connector->base.base.id, + connector->base.name, + drm_get_connector_status_name(old_status), + drm_get_connector_status_name(connector->base.status), + old_epoch_counter, + connector->base.epoch_counter); + return INTEL_HOTPLUG_CHANGED; + } + return INTEL_HOTPLUG_UNCHANGED; +} + +static bool intel_encoder_has_hpd_pulse(struct intel_encoder *encoder) +{ + return intel_encoder_is_dig_port(encoder) && + enc_to_dig_port(encoder)->hpd_pulse != NULL; +} + +static void i915_digport_work_func(struct work_struct *work) +{ + struct drm_i915_private *dev_priv = + container_of(work, struct drm_i915_private, display.hotplug.dig_port_work); + u32 long_port_mask, short_port_mask; + struct intel_encoder *encoder; + u32 old_bits = 0; + + spin_lock_irq(&dev_priv->irq_lock); + long_port_mask = dev_priv->display.hotplug.long_port_mask; + dev_priv->display.hotplug.long_port_mask = 0; + short_port_mask = dev_priv->display.hotplug.short_port_mask; + dev_priv->display.hotplug.short_port_mask = 0; + spin_unlock_irq(&dev_priv->irq_lock); + + for_each_intel_encoder(&dev_priv->drm, encoder) { + struct intel_digital_port *dig_port; + enum port port = encoder->port; + bool long_hpd, short_hpd; + enum irqreturn ret; + + if (!intel_encoder_has_hpd_pulse(encoder)) + continue; + + long_hpd = long_port_mask & BIT(port); + short_hpd = short_port_mask & BIT(port); + + if (!long_hpd && !short_hpd) + continue; + + dig_port = enc_to_dig_port(encoder); + + ret = dig_port->hpd_pulse(dig_port, long_hpd); + if (ret == IRQ_NONE) { + /* fall back to old school hpd */ + old_bits |= BIT(encoder->hpd_pin); + } + } + + if (old_bits) { + spin_lock_irq(&dev_priv->irq_lock); + dev_priv->display.hotplug.event_bits |= old_bits; + spin_unlock_irq(&dev_priv->irq_lock); + queue_delayed_work(dev_priv->unordered_wq, + &dev_priv->display.hotplug.hotplug_work, 0); + } +} + +/** + * intel_hpd_trigger_irq - trigger an hpd irq event for a port + * @dig_port: digital port + * + * Trigger an HPD interrupt event for the given port, emulating a short pulse + * generated by the sink, and schedule the dig port work to handle it. + */ +void intel_hpd_trigger_irq(struct intel_digital_port *dig_port) +{ + struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); + + spin_lock_irq(&i915->irq_lock); + i915->display.hotplug.short_port_mask |= BIT(dig_port->base.port); + spin_unlock_irq(&i915->irq_lock); + + queue_work(i915->display.hotplug.dp_wq, &i915->display.hotplug.dig_port_work); +} + +/* + * Handle hotplug events outside the interrupt handler proper. + */ +static void i915_hotplug_work_func(struct work_struct *work) +{ + struct drm_i915_private *dev_priv = + container_of(work, struct drm_i915_private, + display.hotplug.hotplug_work.work); + struct drm_connector_list_iter conn_iter; + struct intel_connector *connector; + u32 changed = 0, retry = 0; + u32 hpd_event_bits; + u32 hpd_retry_bits; + struct drm_connector *first_changed_connector = NULL; + int changed_connectors = 0; + + mutex_lock(&dev_priv->drm.mode_config.mutex); + drm_dbg_kms(&dev_priv->drm, "running encoder hotplug functions\n"); + + spin_lock_irq(&dev_priv->irq_lock); + + hpd_event_bits = dev_priv->display.hotplug.event_bits; + dev_priv->display.hotplug.event_bits = 0; + hpd_retry_bits = dev_priv->display.hotplug.retry_bits; + dev_priv->display.hotplug.retry_bits = 0; + + /* Enable polling for connectors which had HPD IRQ storms */ + intel_hpd_irq_storm_switch_to_polling(dev_priv); + + spin_unlock_irq(&dev_priv->irq_lock); + + /* Skip calling encode hotplug handlers if ignore long HPD set*/ + if (dev_priv->display.hotplug.ignore_long_hpd) { + drm_dbg_kms(&dev_priv->drm, "Ignore HPD flag on - skip encoder hotplug handlers\n"); + mutex_unlock(&dev_priv->drm.mode_config.mutex); + return; + } + + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); + for_each_intel_connector_iter(connector, &conn_iter) { + enum hpd_pin pin; + u32 hpd_bit; + + pin = intel_connector_hpd_pin(connector); + if (pin == HPD_NONE) + continue; + + hpd_bit = BIT(pin); + if ((hpd_event_bits | hpd_retry_bits) & hpd_bit) { + struct intel_encoder *encoder = + intel_attached_encoder(connector); + + if (hpd_event_bits & hpd_bit) + connector->hotplug_retries = 0; + else + connector->hotplug_retries++; + + drm_dbg_kms(&dev_priv->drm, + "Connector %s (pin %i) received hotplug event. (retry %d)\n", + connector->base.name, pin, + connector->hotplug_retries); + + switch (encoder->hotplug(encoder, connector)) { + case INTEL_HOTPLUG_UNCHANGED: + break; + case INTEL_HOTPLUG_CHANGED: + changed |= hpd_bit; + changed_connectors++; + if (!first_changed_connector) { + drm_connector_get(&connector->base); + first_changed_connector = &connector->base; + } + break; + case INTEL_HOTPLUG_RETRY: + retry |= hpd_bit; + break; + } + } + } + drm_connector_list_iter_end(&conn_iter); + mutex_unlock(&dev_priv->drm.mode_config.mutex); + + if (changed_connectors == 1) + drm_kms_helper_connector_hotplug_event(first_changed_connector); + else if (changed_connectors > 0) + drm_kms_helper_hotplug_event(&dev_priv->drm); + + if (first_changed_connector) + drm_connector_put(first_changed_connector); + + /* Remove shared HPD pins that have changed */ + retry &= ~changed; + if (retry) { + spin_lock_irq(&dev_priv->irq_lock); + dev_priv->display.hotplug.retry_bits |= retry; + spin_unlock_irq(&dev_priv->irq_lock); + + mod_delayed_work(dev_priv->unordered_wq, + &dev_priv->display.hotplug.hotplug_work, + msecs_to_jiffies(HPD_RETRY_DELAY)); + } +} + + +/** + * intel_hpd_irq_handler - main hotplug irq handler + * @dev_priv: drm_i915_private + * @pin_mask: a mask of hpd pins that have triggered the irq + * @long_mask: a mask of hpd pins that may be long hpd pulses + * + * This is the main hotplug irq handler for all platforms. The platform specific + * irq handlers call the platform specific hotplug irq handlers, which read and + * decode the appropriate registers into bitmasks about hpd pins that have + * triggered (@pin_mask), and which of those pins may be long pulses + * (@long_mask). The @long_mask is ignored if the port corresponding to the pin + * is not a digital port. + * + * Here, we do hotplug irq storm detection and mitigation, and pass further + * processing to appropriate bottom halves. + */ +void intel_hpd_irq_handler(struct drm_i915_private *dev_priv, + u32 pin_mask, u32 long_mask) +{ + struct intel_encoder *encoder; + bool storm_detected = false; + bool queue_dig = false, queue_hp = false; + u32 long_hpd_pulse_mask = 0; + u32 short_hpd_pulse_mask = 0; + enum hpd_pin pin; + + if (!pin_mask) + return; + + spin_lock(&dev_priv->irq_lock); + + /* + * Determine whether ->hpd_pulse() exists for each pin, and + * whether we have a short or a long pulse. This is needed + * as each pin may have up to two encoders (HDMI and DP) and + * only the one of them (DP) will have ->hpd_pulse(). + */ + for_each_intel_encoder(&dev_priv->drm, encoder) { + enum port port = encoder->port; + bool long_hpd; + + pin = encoder->hpd_pin; + if (!(BIT(pin) & pin_mask)) + continue; + + if (!intel_encoder_has_hpd_pulse(encoder)) + continue; + + long_hpd = long_mask & BIT(pin); + + drm_dbg(&dev_priv->drm, + "digital hpd on [ENCODER:%d:%s] - %s\n", + encoder->base.base.id, encoder->base.name, + long_hpd ? "long" : "short"); + queue_dig = true; + + if (long_hpd) { + long_hpd_pulse_mask |= BIT(pin); + dev_priv->display.hotplug.long_port_mask |= BIT(port); + } else { + short_hpd_pulse_mask |= BIT(pin); + dev_priv->display.hotplug.short_port_mask |= BIT(port); + } + } + + /* Now process each pin just once */ + for_each_hpd_pin(pin) { + bool long_hpd; + + if (!(BIT(pin) & pin_mask)) + continue; + + if (dev_priv->display.hotplug.stats[pin].state == HPD_DISABLED) { + /* + * On GMCH platforms the interrupt mask bits only + * prevent irq generation, not the setting of the + * hotplug bits itself. So only WARN about unexpected + * interrupts on saner platforms. + */ + drm_WARN_ONCE(&dev_priv->drm, !HAS_GMCH(dev_priv), + "Received HPD interrupt on pin %d although disabled\n", + pin); + continue; + } + + if (dev_priv->display.hotplug.stats[pin].state != HPD_ENABLED) + continue; + + /* + * Delegate to ->hpd_pulse() if one of the encoders for this + * pin has it, otherwise let the hotplug_work deal with this + * pin directly. + */ + if (((short_hpd_pulse_mask | long_hpd_pulse_mask) & BIT(pin))) { + long_hpd = long_hpd_pulse_mask & BIT(pin); + } else { + dev_priv->display.hotplug.event_bits |= BIT(pin); + long_hpd = true; + queue_hp = true; + } + + if (intel_hpd_irq_storm_detect(dev_priv, pin, long_hpd)) { + dev_priv->display.hotplug.event_bits &= ~BIT(pin); + storm_detected = true; + queue_hp = true; + } + } + + /* + * Disable any IRQs that storms were detected on. Polling enablement + * happens later in our hotplug work. + */ + if (storm_detected) + intel_hpd_irq_setup(dev_priv); + spin_unlock(&dev_priv->irq_lock); + + /* + * Our hotplug handler can grab modeset locks (by calling down into the + * fb helpers). Hence it must not be run on our own dev-priv->wq work + * queue for otherwise the flush_work in the pageflip code will + * deadlock. + */ + if (queue_dig) + queue_work(dev_priv->display.hotplug.dp_wq, &dev_priv->display.hotplug.dig_port_work); + if (queue_hp) + queue_delayed_work(dev_priv->unordered_wq, + &dev_priv->display.hotplug.hotplug_work, 0); +} + +/** + * intel_hpd_init - initializes and enables hpd support + * @dev_priv: i915 device instance + * + * This function enables the hotplug support. It requires that interrupts have + * already been enabled with intel_irq_init_hw(). From this point on hotplug and + * poll request can run concurrently to other code, so locking rules must be + * obeyed. + * + * This is a separate step from interrupt enabling to simplify the locking rules + * in the driver load and resume code. + * + * Also see: intel_hpd_poll_enable() and intel_hpd_poll_disable(). + */ +void intel_hpd_init(struct drm_i915_private *dev_priv) +{ + int i; + + if (!HAS_DISPLAY(dev_priv)) + return; + + for_each_hpd_pin(i) { + dev_priv->display.hotplug.stats[i].count = 0; + dev_priv->display.hotplug.stats[i].state = HPD_ENABLED; + } + + /* + * Interrupt setup is already guaranteed to be single-threaded, this is + * just to make the assert_spin_locked checks happy. + */ + spin_lock_irq(&dev_priv->irq_lock); + intel_hpd_irq_setup(dev_priv); + spin_unlock_irq(&dev_priv->irq_lock); +} + +static void i915_hpd_poll_init_work(struct work_struct *work) +{ + struct drm_i915_private *dev_priv = + container_of(work, struct drm_i915_private, + display.hotplug.poll_init_work); + struct drm_connector_list_iter conn_iter; + struct intel_connector *connector; + bool enabled; + + mutex_lock(&dev_priv->drm.mode_config.mutex); + + enabled = READ_ONCE(dev_priv->display.hotplug.poll_enabled); + + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); + for_each_intel_connector_iter(connector, &conn_iter) { + enum hpd_pin pin; + + pin = intel_connector_hpd_pin(connector); + if (pin == HPD_NONE) + continue; + + connector->base.polled = connector->polled; + + if (enabled && connector->base.polled == DRM_CONNECTOR_POLL_HPD) + connector->base.polled = DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT; + } + drm_connector_list_iter_end(&conn_iter); + + if (enabled) + drm_kms_helper_poll_reschedule(&dev_priv->drm); + + mutex_unlock(&dev_priv->drm.mode_config.mutex); + + /* + * We might have missed any hotplugs that happened while we were + * in the middle of disabling polling + */ + if (!enabled) + drm_helper_hpd_irq_event(&dev_priv->drm); +} + +/** + * intel_hpd_poll_enable - enable polling for connectors with hpd + * @dev_priv: i915 device instance + * + * This function enables polling for all connectors which support HPD. + * Under certain conditions HPD may not be functional. On most Intel GPUs, + * this happens when we enter runtime suspend. + * On Valleyview and Cherryview systems, this also happens when we shut off all + * of the powerwells. + * + * Since this function can get called in contexts where we're already holding + * dev->mode_config.mutex, we do the actual hotplug enabling in a seperate + * worker. + * + * Also see: intel_hpd_init() and intel_hpd_poll_disable(). + */ +void intel_hpd_poll_enable(struct drm_i915_private *dev_priv) +{ + if (!HAS_DISPLAY(dev_priv) || + !INTEL_DISPLAY_ENABLED(dev_priv)) + return; + + WRITE_ONCE(dev_priv->display.hotplug.poll_enabled, true); + + /* + * We might already be holding dev->mode_config.mutex, so do this in a + * seperate worker + * As well, there's no issue if we race here since we always reschedule + * this worker anyway + */ + queue_work(dev_priv->unordered_wq, + &dev_priv->display.hotplug.poll_init_work); +} + +/** + * intel_hpd_poll_disable - disable polling for connectors with hpd + * @dev_priv: i915 device instance + * + * This function disables polling for all connectors which support HPD. + * Under certain conditions HPD may not be functional. On most Intel GPUs, + * this happens when we enter runtime suspend. + * On Valleyview and Cherryview systems, this also happens when we shut off all + * of the powerwells. + * + * Since this function can get called in contexts where we're already holding + * dev->mode_config.mutex, we do the actual hotplug enabling in a seperate + * worker. + * + * Also used during driver init to initialize connector->polled + * appropriately for all connectors. + * + * Also see: intel_hpd_init() and intel_hpd_poll_enable(). + */ +void intel_hpd_poll_disable(struct drm_i915_private *dev_priv) +{ + if (!HAS_DISPLAY(dev_priv)) + return; + + WRITE_ONCE(dev_priv->display.hotplug.poll_enabled, false); + queue_work(dev_priv->unordered_wq, + &dev_priv->display.hotplug.poll_init_work); +} + +void intel_hpd_init_early(struct drm_i915_private *i915) +{ + INIT_DELAYED_WORK(&i915->display.hotplug.hotplug_work, + i915_hotplug_work_func); + INIT_WORK(&i915->display.hotplug.dig_port_work, i915_digport_work_func); + INIT_WORK(&i915->display.hotplug.poll_init_work, i915_hpd_poll_init_work); + INIT_DELAYED_WORK(&i915->display.hotplug.reenable_work, + intel_hpd_irq_storm_reenable_work); + + i915->display.hotplug.hpd_storm_threshold = HPD_STORM_DEFAULT_THRESHOLD; + /* If we have MST support, we want to avoid doing short HPD IRQ storm + * detection, as short HPD storms will occur as a natural part of + * sideband messaging with MST. + * On older platforms however, IRQ storms can occur with both long and + * short pulses, as seen on some G4x systems. + */ + i915->display.hotplug.hpd_short_storm_enabled = !HAS_DP_MST(i915); +} + +void intel_hpd_cancel_work(struct drm_i915_private *dev_priv) +{ + if (!HAS_DISPLAY(dev_priv)) + return; + + spin_lock_irq(&dev_priv->irq_lock); + + dev_priv->display.hotplug.long_port_mask = 0; + dev_priv->display.hotplug.short_port_mask = 0; + dev_priv->display.hotplug.event_bits = 0; + dev_priv->display.hotplug.retry_bits = 0; + + spin_unlock_irq(&dev_priv->irq_lock); + + cancel_work_sync(&dev_priv->display.hotplug.dig_port_work); + cancel_delayed_work_sync(&dev_priv->display.hotplug.hotplug_work); + cancel_work_sync(&dev_priv->display.hotplug.poll_init_work); + cancel_delayed_work_sync(&dev_priv->display.hotplug.reenable_work); +} + +bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin) +{ + bool ret = false; + + if (pin == HPD_NONE) + return false; + + spin_lock_irq(&dev_priv->irq_lock); + if (dev_priv->display.hotplug.stats[pin].state == HPD_ENABLED) { + dev_priv->display.hotplug.stats[pin].state = HPD_DISABLED; + ret = true; + } + spin_unlock_irq(&dev_priv->irq_lock); + + return ret; +} + +void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin) +{ + if (pin == HPD_NONE) + return; + + spin_lock_irq(&dev_priv->irq_lock); + dev_priv->display.hotplug.stats[pin].state = HPD_ENABLED; + spin_unlock_irq(&dev_priv->irq_lock); +} + +static int i915_hpd_storm_ctl_show(struct seq_file *m, void *data) +{ + struct drm_i915_private *dev_priv = m->private; + struct intel_hotplug *hotplug = &dev_priv->display.hotplug; + + /* Synchronize with everything first in case there's been an HPD + * storm, but we haven't finished handling it in the kernel yet + */ + intel_synchronize_irq(dev_priv); + flush_work(&dev_priv->display.hotplug.dig_port_work); + flush_delayed_work(&dev_priv->display.hotplug.hotplug_work); + + seq_printf(m, "Threshold: %d\n", hotplug->hpd_storm_threshold); + seq_printf(m, "Detected: %s\n", + str_yes_no(delayed_work_pending(&hotplug->reenable_work))); + + return 0; +} + +static ssize_t i915_hpd_storm_ctl_write(struct file *file, + const char __user *ubuf, size_t len, + loff_t *offp) +{ + struct seq_file *m = file->private_data; + struct drm_i915_private *dev_priv = m->private; + struct intel_hotplug *hotplug = &dev_priv->display.hotplug; + unsigned int new_threshold; + int i; + char *newline; + char tmp[16]; + + if (len >= sizeof(tmp)) + return -EINVAL; + + if (copy_from_user(tmp, ubuf, len)) + return -EFAULT; + + tmp[len] = '\0'; + + /* Strip newline, if any */ + newline = strchr(tmp, '\n'); + if (newline) + *newline = '\0'; + + if (strcmp(tmp, "reset") == 0) + new_threshold = HPD_STORM_DEFAULT_THRESHOLD; + else if (kstrtouint(tmp, 10, &new_threshold) != 0) + return -EINVAL; + + if (new_threshold > 0) + drm_dbg_kms(&dev_priv->drm, + "Setting HPD storm detection threshold to %d\n", + new_threshold); + else + drm_dbg_kms(&dev_priv->drm, "Disabling HPD storm detection\n"); + + spin_lock_irq(&dev_priv->irq_lock); + hotplug->hpd_storm_threshold = new_threshold; + /* Reset the HPD storm stats so we don't accidentally trigger a storm */ + for_each_hpd_pin(i) + hotplug->stats[i].count = 0; + spin_unlock_irq(&dev_priv->irq_lock); + + /* Re-enable hpd immediately if we were in an irq storm */ + flush_delayed_work(&dev_priv->display.hotplug.reenable_work); + + return len; +} + +static int i915_hpd_storm_ctl_open(struct inode *inode, struct file *file) +{ + return single_open(file, i915_hpd_storm_ctl_show, inode->i_private); +} + +static const struct file_operations i915_hpd_storm_ctl_fops = { + .owner = THIS_MODULE, + .open = i915_hpd_storm_ctl_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = i915_hpd_storm_ctl_write +}; + +static int i915_hpd_short_storm_ctl_show(struct seq_file *m, void *data) +{ + struct drm_i915_private *dev_priv = m->private; + + seq_printf(m, "Enabled: %s\n", + str_yes_no(dev_priv->display.hotplug.hpd_short_storm_enabled)); + + return 0; +} + +static int +i915_hpd_short_storm_ctl_open(struct inode *inode, struct file *file) +{ + return single_open(file, i915_hpd_short_storm_ctl_show, + inode->i_private); +} + +static ssize_t i915_hpd_short_storm_ctl_write(struct file *file, + const char __user *ubuf, + size_t len, loff_t *offp) +{ + struct seq_file *m = file->private_data; + struct drm_i915_private *dev_priv = m->private; + struct intel_hotplug *hotplug = &dev_priv->display.hotplug; + char *newline; + char tmp[16]; + int i; + bool new_state; + + if (len >= sizeof(tmp)) + return -EINVAL; + + if (copy_from_user(tmp, ubuf, len)) + return -EFAULT; + + tmp[len] = '\0'; + + /* Strip newline, if any */ + newline = strchr(tmp, '\n'); + if (newline) + *newline = '\0'; + + /* Reset to the "default" state for this system */ + if (strcmp(tmp, "reset") == 0) + new_state = !HAS_DP_MST(dev_priv); + else if (kstrtobool(tmp, &new_state) != 0) + return -EINVAL; + + drm_dbg_kms(&dev_priv->drm, "%sabling HPD short storm detection\n", + new_state ? "En" : "Dis"); + + spin_lock_irq(&dev_priv->irq_lock); + hotplug->hpd_short_storm_enabled = new_state; + /* Reset the HPD storm stats so we don't accidentally trigger a storm */ + for_each_hpd_pin(i) + hotplug->stats[i].count = 0; + spin_unlock_irq(&dev_priv->irq_lock); + + /* Re-enable hpd immediately if we were in an irq storm */ + flush_delayed_work(&dev_priv->display.hotplug.reenable_work); + + return len; +} + +static const struct file_operations i915_hpd_short_storm_ctl_fops = { + .owner = THIS_MODULE, + .open = i915_hpd_short_storm_ctl_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = i915_hpd_short_storm_ctl_write, +}; + +void intel_hpd_debugfs_register(struct drm_i915_private *i915) +{ + struct drm_minor *minor = i915->drm.primary; + + debugfs_create_file("i915_hpd_storm_ctl", 0644, minor->debugfs_root, + i915, &i915_hpd_storm_ctl_fops); + debugfs_create_file("i915_hpd_short_storm_ctl", 0644, minor->debugfs_root, + i915, &i915_hpd_short_storm_ctl_fops); + debugfs_create_bool("i915_ignore_long_hpd", 0644, minor->debugfs_root, + &i915->display.hotplug.ignore_long_hpd); +} |