summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/kmb/kmb_dsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/kmb/kmb_dsi.c')
-rw-r--r--drivers/gpu/drm/kmb/kmb_dsi.c1566
1 files changed, 1566 insertions, 0 deletions
diff --git a/drivers/gpu/drm/kmb/kmb_dsi.c b/drivers/gpu/drm/kmb/kmb_dsi.c
new file mode 100644
index 000000000..cf7cf0b07
--- /dev/null
+++ b/drivers/gpu/drm/kmb/kmb_dsi.c
@@ -0,0 +1,1566 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © 2019-2020 Intel Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "kmb_dsi.h"
+#include "kmb_regs.h"
+
+static struct mipi_dsi_host *dsi_host;
+static struct mipi_dsi_device *dsi_device;
+static struct drm_bridge *adv_bridge;
+
+/* Default setting is 1080p, 4 lanes */
+#define IMG_HEIGHT_LINES 1080
+#define IMG_WIDTH_PX 1920
+#define MIPI_TX_ACTIVE_LANES 4
+
+static struct mipi_tx_frame_section_cfg mipi_tx_frame0_sect_cfg = {
+ .width_pixels = IMG_WIDTH_PX,
+ .height_lines = IMG_HEIGHT_LINES,
+ .data_type = DSI_LP_DT_PPS_RGB888_24B,
+ .data_mode = MIPI_DATA_MODE1,
+ .dma_packed = 0
+};
+
+static struct mipi_tx_frame_cfg mipitx_frame0_cfg = {
+ .sections[0] = &mipi_tx_frame0_sect_cfg,
+ .sections[1] = NULL,
+ .sections[2] = NULL,
+ .sections[3] = NULL,
+ .vsync_width = 5,
+ .v_backporch = 36,
+ .v_frontporch = 4,
+ .hsync_width = 44,
+ .h_backporch = 148,
+ .h_frontporch = 88
+};
+
+static const struct mipi_tx_dsi_cfg mipitx_dsi_cfg = {
+ .hfp_blank_en = 0,
+ .eotp_en = 0,
+ .lpm_last_vfp_line = 0,
+ .lpm_first_vsa_line = 0,
+ .sync_pulse_eventn = DSI_VIDEO_MODE_NO_BURST_EVENT,
+ .hfp_blanking = SEND_BLANK_PACKET,
+ .hbp_blanking = SEND_BLANK_PACKET,
+ .hsa_blanking = SEND_BLANK_PACKET,
+ .v_blanking = SEND_BLANK_PACKET,
+};
+
+static struct mipi_ctrl_cfg mipi_tx_init_cfg = {
+ .active_lanes = MIPI_TX_ACTIVE_LANES,
+ .lane_rate_mbps = MIPI_TX_LANE_DATA_RATE_MBPS,
+ .ref_clk_khz = MIPI_TX_REF_CLK_KHZ,
+ .cfg_clk_khz = MIPI_TX_CFG_CLK_KHZ,
+ .tx_ctrl_cfg = {
+ .frames[0] = &mipitx_frame0_cfg,
+ .frames[1] = NULL,
+ .frames[2] = NULL,
+ .frames[3] = NULL,
+ .tx_dsi_cfg = &mipitx_dsi_cfg,
+ .line_sync_pkt_en = 0,
+ .line_counter_active = 0,
+ .frame_counter_active = 0,
+ .tx_always_use_hact = 1,
+ .tx_hact_wait_stop = 1,
+ }
+};
+
+struct mipi_hs_freq_range_cfg {
+ u16 default_bit_rate_mbps;
+ u8 hsfreqrange_code;
+};
+
+struct vco_params {
+ u32 freq;
+ u32 range;
+ u32 divider;
+};
+
+static const struct vco_params vco_table[] = {
+ {52, 0x3f, 8},
+ {80, 0x39, 8},
+ {105, 0x2f, 4},
+ {160, 0x29, 4},
+ {210, 0x1f, 2},
+ {320, 0x19, 2},
+ {420, 0x0f, 1},
+ {630, 0x09, 1},
+ {1100, 0x03, 1},
+ {0xffff, 0x01, 1},
+};
+
+static const struct mipi_hs_freq_range_cfg
+mipi_hs_freq_range[MIPI_DPHY_DEFAULT_BIT_RATES] = {
+ {.default_bit_rate_mbps = 80, .hsfreqrange_code = 0x00},
+ {.default_bit_rate_mbps = 90, .hsfreqrange_code = 0x10},
+ {.default_bit_rate_mbps = 100, .hsfreqrange_code = 0x20},
+ {.default_bit_rate_mbps = 110, .hsfreqrange_code = 0x30},
+ {.default_bit_rate_mbps = 120, .hsfreqrange_code = 0x01},
+ {.default_bit_rate_mbps = 130, .hsfreqrange_code = 0x11},
+ {.default_bit_rate_mbps = 140, .hsfreqrange_code = 0x21},
+ {.default_bit_rate_mbps = 150, .hsfreqrange_code = 0x31},
+ {.default_bit_rate_mbps = 160, .hsfreqrange_code = 0x02},
+ {.default_bit_rate_mbps = 170, .hsfreqrange_code = 0x12},
+ {.default_bit_rate_mbps = 180, .hsfreqrange_code = 0x22},
+ {.default_bit_rate_mbps = 190, .hsfreqrange_code = 0x32},
+ {.default_bit_rate_mbps = 205, .hsfreqrange_code = 0x03},
+ {.default_bit_rate_mbps = 220, .hsfreqrange_code = 0x13},
+ {.default_bit_rate_mbps = 235, .hsfreqrange_code = 0x23},
+ {.default_bit_rate_mbps = 250, .hsfreqrange_code = 0x33},
+ {.default_bit_rate_mbps = 275, .hsfreqrange_code = 0x04},
+ {.default_bit_rate_mbps = 300, .hsfreqrange_code = 0x14},
+ {.default_bit_rate_mbps = 325, .hsfreqrange_code = 0x25},
+ {.default_bit_rate_mbps = 350, .hsfreqrange_code = 0x35},
+ {.default_bit_rate_mbps = 400, .hsfreqrange_code = 0x05},
+ {.default_bit_rate_mbps = 450, .hsfreqrange_code = 0x16},
+ {.default_bit_rate_mbps = 500, .hsfreqrange_code = 0x26},
+ {.default_bit_rate_mbps = 550, .hsfreqrange_code = 0x37},
+ {.default_bit_rate_mbps = 600, .hsfreqrange_code = 0x07},
+ {.default_bit_rate_mbps = 650, .hsfreqrange_code = 0x18},
+ {.default_bit_rate_mbps = 700, .hsfreqrange_code = 0x28},
+ {.default_bit_rate_mbps = 750, .hsfreqrange_code = 0x39},
+ {.default_bit_rate_mbps = 800, .hsfreqrange_code = 0x09},
+ {.default_bit_rate_mbps = 850, .hsfreqrange_code = 0x19},
+ {.default_bit_rate_mbps = 900, .hsfreqrange_code = 0x29},
+ {.default_bit_rate_mbps = 1000, .hsfreqrange_code = 0x0A},
+ {.default_bit_rate_mbps = 1050, .hsfreqrange_code = 0x1A},
+ {.default_bit_rate_mbps = 1100, .hsfreqrange_code = 0x2A},
+ {.default_bit_rate_mbps = 1150, .hsfreqrange_code = 0x3B},
+ {.default_bit_rate_mbps = 1200, .hsfreqrange_code = 0x0B},
+ {.default_bit_rate_mbps = 1250, .hsfreqrange_code = 0x1B},
+ {.default_bit_rate_mbps = 1300, .hsfreqrange_code = 0x2B},
+ {.default_bit_rate_mbps = 1350, .hsfreqrange_code = 0x3C},
+ {.default_bit_rate_mbps = 1400, .hsfreqrange_code = 0x0C},
+ {.default_bit_rate_mbps = 1450, .hsfreqrange_code = 0x1C},
+ {.default_bit_rate_mbps = 1500, .hsfreqrange_code = 0x2C},
+ {.default_bit_rate_mbps = 1550, .hsfreqrange_code = 0x3D},
+ {.default_bit_rate_mbps = 1600, .hsfreqrange_code = 0x0D},
+ {.default_bit_rate_mbps = 1650, .hsfreqrange_code = 0x1D},
+ {.default_bit_rate_mbps = 1700, .hsfreqrange_code = 0x2E},
+ {.default_bit_rate_mbps = 1750, .hsfreqrange_code = 0x3E},
+ {.default_bit_rate_mbps = 1800, .hsfreqrange_code = 0x0E},
+ {.default_bit_rate_mbps = 1850, .hsfreqrange_code = 0x1E},
+ {.default_bit_rate_mbps = 1900, .hsfreqrange_code = 0x2F},
+ {.default_bit_rate_mbps = 1950, .hsfreqrange_code = 0x3F},
+ {.default_bit_rate_mbps = 2000, .hsfreqrange_code = 0x0F},
+ {.default_bit_rate_mbps = 2050, .hsfreqrange_code = 0x40},
+ {.default_bit_rate_mbps = 2100, .hsfreqrange_code = 0x41},
+ {.default_bit_rate_mbps = 2150, .hsfreqrange_code = 0x42},
+ {.default_bit_rate_mbps = 2200, .hsfreqrange_code = 0x43},
+ {.default_bit_rate_mbps = 2250, .hsfreqrange_code = 0x44},
+ {.default_bit_rate_mbps = 2300, .hsfreqrange_code = 0x45},
+ {.default_bit_rate_mbps = 2350, .hsfreqrange_code = 0x46},
+ {.default_bit_rate_mbps = 2400, .hsfreqrange_code = 0x47},
+ {.default_bit_rate_mbps = 2450, .hsfreqrange_code = 0x48},
+ {.default_bit_rate_mbps = 2500, .hsfreqrange_code = 0x49}
+};
+
+static void kmb_dsi_clk_disable(struct kmb_dsi *kmb_dsi)
+{
+ clk_disable_unprepare(kmb_dsi->clk_mipi);
+ clk_disable_unprepare(kmb_dsi->clk_mipi_ecfg);
+ clk_disable_unprepare(kmb_dsi->clk_mipi_cfg);
+}
+
+void kmb_dsi_host_unregister(struct kmb_dsi *kmb_dsi)
+{
+ kmb_dsi_clk_disable(kmb_dsi);
+ mipi_dsi_host_unregister(kmb_dsi->host);
+}
+
+/*
+ * This DSI can only be paired with bridges that do config through i2c
+ * which is ADV 7535 in the KMB EVM
+ */
+static ssize_t kmb_dsi_host_transfer(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg)
+{
+ return 0;
+}
+
+static int kmb_dsi_host_attach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *dev)
+{
+ return 0;
+}
+
+static int kmb_dsi_host_detach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *dev)
+{
+ return 0;
+}
+
+static const struct mipi_dsi_host_ops kmb_dsi_host_ops = {
+ .attach = kmb_dsi_host_attach,
+ .detach = kmb_dsi_host_detach,
+ .transfer = kmb_dsi_host_transfer,
+};
+
+int kmb_dsi_host_bridge_init(struct device *dev)
+{
+ struct device_node *encoder_node, *dsi_out;
+
+ /* Create and register MIPI DSI host */
+ if (!dsi_host) {
+ dsi_host = kzalloc(sizeof(*dsi_host), GFP_KERNEL);
+ if (!dsi_host)
+ return -ENOMEM;
+
+ dsi_host->ops = &kmb_dsi_host_ops;
+
+ if (!dsi_device) {
+ dsi_device = kzalloc(sizeof(*dsi_device), GFP_KERNEL);
+ if (!dsi_device) {
+ kfree(dsi_host);
+ return -ENOMEM;
+ }
+ }
+
+ dsi_host->dev = dev;
+ mipi_dsi_host_register(dsi_host);
+ }
+
+ /* Find ADV7535 node and initialize it */
+ dsi_out = of_graph_get_endpoint_by_regs(dev->of_node, 0, 1);
+ if (!dsi_out) {
+ DRM_ERROR("Failed to get dsi_out node info from DT\n");
+ return -EINVAL;
+ }
+ encoder_node = of_graph_get_remote_port_parent(dsi_out);
+ if (!encoder_node) {
+ of_node_put(dsi_out);
+ DRM_ERROR("Failed to get bridge info from DT\n");
+ return -EINVAL;
+ }
+ /* Locate drm bridge from the hdmi encoder DT node */
+ adv_bridge = of_drm_find_bridge(encoder_node);
+ of_node_put(dsi_out);
+ of_node_put(encoder_node);
+ if (!adv_bridge) {
+ DRM_DEBUG("Wait for external bridge driver DT\n");
+ return -EPROBE_DEFER;
+ }
+
+ return 0;
+}
+
+static u32 mipi_get_datatype_params(u32 data_type, u32 data_mode,
+ struct mipi_data_type_params *params)
+{
+ struct mipi_data_type_params data_type_param;
+
+ switch (data_type) {
+ case DSI_LP_DT_PPS_YCBCR420_12B:
+ data_type_param.size_constraint_pixels = 2;
+ data_type_param.size_constraint_bytes = 3;
+ switch (data_mode) {
+ /* Case 0 not supported according to MDK */
+ case 1:
+ case 2:
+ case 3:
+ data_type_param.pixels_per_pclk = 2;
+ data_type_param.bits_per_pclk = 24;
+ break;
+ default:
+ DRM_ERROR("DSI: Invalid data_mode %d\n", data_mode);
+ return -EINVAL;
+ }
+ break;
+ case DSI_LP_DT_PPS_YCBCR422_16B:
+ data_type_param.size_constraint_pixels = 2;
+ data_type_param.size_constraint_bytes = 4;
+ switch (data_mode) {
+ /* Case 0 and 1 not supported according
+ * to MDK
+ */
+ case 2:
+ data_type_param.pixels_per_pclk = 1;
+ data_type_param.bits_per_pclk = 16;
+ break;
+ case 3:
+ data_type_param.pixels_per_pclk = 2;
+ data_type_param.bits_per_pclk = 32;
+ break;
+ default:
+ DRM_ERROR("DSI: Invalid data_mode %d\n", data_mode);
+ return -EINVAL;
+ }
+ break;
+ case DSI_LP_DT_LPPS_YCBCR422_20B:
+ case DSI_LP_DT_PPS_YCBCR422_24B:
+ data_type_param.size_constraint_pixels = 2;
+ data_type_param.size_constraint_bytes = 6;
+ switch (data_mode) {
+ /* Case 0 not supported according to MDK */
+ case 1:
+ case 2:
+ case 3:
+ data_type_param.pixels_per_pclk = 1;
+ data_type_param.bits_per_pclk = 24;
+ break;
+ default:
+ DRM_ERROR("DSI: Invalid data_mode %d\n", data_mode);
+ return -EINVAL;
+ }
+ break;
+ case DSI_LP_DT_PPS_RGB565_16B:
+ data_type_param.size_constraint_pixels = 1;
+ data_type_param.size_constraint_bytes = 2;
+ switch (data_mode) {
+ case 0:
+ case 1:
+ data_type_param.pixels_per_pclk = 1;
+ data_type_param.bits_per_pclk = 16;
+ break;
+ case 2:
+ case 3:
+ data_type_param.pixels_per_pclk = 2;
+ data_type_param.bits_per_pclk = 32;
+ break;
+ default:
+ DRM_ERROR("DSI: Invalid data_mode %d\n", data_mode);
+ return -EINVAL;
+ }
+ break;
+ case DSI_LP_DT_PPS_RGB666_18B:
+ data_type_param.size_constraint_pixels = 4;
+ data_type_param.size_constraint_bytes = 9;
+ data_type_param.bits_per_pclk = 18;
+ data_type_param.pixels_per_pclk = 1;
+ break;
+ case DSI_LP_DT_LPPS_RGB666_18B:
+ case DSI_LP_DT_PPS_RGB888_24B:
+ data_type_param.size_constraint_pixels = 1;
+ data_type_param.size_constraint_bytes = 3;
+ data_type_param.bits_per_pclk = 24;
+ data_type_param.pixels_per_pclk = 1;
+ break;
+ case DSI_LP_DT_PPS_RGB101010_30B:
+ data_type_param.size_constraint_pixels = 4;
+ data_type_param.size_constraint_bytes = 15;
+ data_type_param.bits_per_pclk = 30;
+ data_type_param.pixels_per_pclk = 1;
+ break;
+ default:
+ DRM_ERROR("DSI: Invalid data_type %d\n", data_type);
+ return -EINVAL;
+ }
+
+ *params = data_type_param;
+ return 0;
+}
+
+static u32 compute_wc(u32 width_px, u8 size_constr_p, u8 size_constr_b)
+{
+ /* Calculate the word count for each long packet */
+ return (((width_px / size_constr_p) * size_constr_b) & 0xffff);
+}
+
+static u32 compute_unpacked_bytes(u32 wc, u8 bits_per_pclk)
+{
+ /* Number of PCLK cycles needed to transfer a line
+ * with each PCLK cycle, 4 Bytes are sent through the PPL module
+ */
+ return ((wc * 8) / bits_per_pclk) * 4;
+}
+
+static u32 mipi_tx_fg_section_cfg_regs(struct kmb_dsi *kmb_dsi,
+ u8 frame_id, u8 section,
+ u32 height_lines, u32 unpacked_bytes,
+ struct mipi_tx_frame_sect_phcfg *ph_cfg)
+{
+ u32 cfg = 0;
+ u32 ctrl_no = MIPI_CTRL6;
+ u32 reg_adr;
+
+ /* Frame section packet header */
+ /* Word count bits [15:0] */
+ cfg = (ph_cfg->wc & MIPI_TX_SECT_WC_MASK) << 0;
+
+ /* Data type (bits [21:16]) */
+ cfg |= ((ph_cfg->data_type & MIPI_TX_SECT_DT_MASK)
+ << MIPI_TX_SECT_DT_SHIFT);
+
+ /* Virtual channel (bits [23:22]) */
+ cfg |= ((ph_cfg->vchannel & MIPI_TX_SECT_VC_MASK)
+ << MIPI_TX_SECT_VC_SHIFT);
+
+ /* Data mode (bits [24:25]) */
+ cfg |= ((ph_cfg->data_mode & MIPI_TX_SECT_DM_MASK)
+ << MIPI_TX_SECT_DM_SHIFT);
+ if (ph_cfg->dma_packed)
+ cfg |= MIPI_TX_SECT_DMA_PACKED;
+
+ dev_dbg(kmb_dsi->dev,
+ "ctrl=%d frame_id=%d section=%d cfg=%x packed=%d\n",
+ ctrl_no, frame_id, section, cfg, ph_cfg->dma_packed);
+ kmb_write_mipi(kmb_dsi,
+ (MIPI_TXm_HS_FGn_SECTo_PH(ctrl_no, frame_id, section)),
+ cfg);
+
+ /* Unpacked bytes */
+
+ /* There are 4 frame generators and each fg has 4 sections
+ * There are 2 registers for unpacked bytes (# bytes each
+ * section occupies in memory)
+ * REG_UNPACKED_BYTES0: [15:0]-BYTES0, [31:16]-BYTES1
+ * REG_UNPACKED_BYTES1: [15:0]-BYTES2, [31:16]-BYTES3
+ */
+ reg_adr =
+ MIPI_TXm_HS_FGn_SECT_UNPACKED_BYTES0(ctrl_no,
+ frame_id) + (section / 2) * 4;
+ kmb_write_bits_mipi(kmb_dsi, reg_adr, (section % 2) * 16, 16,
+ unpacked_bytes);
+ dev_dbg(kmb_dsi->dev,
+ "unpacked_bytes = %d, wordcount = %d\n", unpacked_bytes,
+ ph_cfg->wc);
+
+ /* Line config */
+ reg_adr = MIPI_TXm_HS_FGn_SECTo_LINE_CFG(ctrl_no, frame_id, section);
+ kmb_write_mipi(kmb_dsi, reg_adr, height_lines);
+ return 0;
+}
+
+static u32 mipi_tx_fg_section_cfg(struct kmb_dsi *kmb_dsi,
+ u8 frame_id, u8 section,
+ struct mipi_tx_frame_section_cfg *frame_scfg,
+ u32 *bits_per_pclk, u32 *wc)
+{
+ u32 ret = 0;
+ u32 unpacked_bytes;
+ struct mipi_data_type_params data_type_parameters;
+ struct mipi_tx_frame_sect_phcfg ph_cfg;
+
+ ret = mipi_get_datatype_params(frame_scfg->data_type,
+ frame_scfg->data_mode,
+ &data_type_parameters);
+ if (ret)
+ return ret;
+
+ /* Packet width has to be a multiple of the minimum packet width
+ * (in pixels) set for each data type
+ */
+ if (frame_scfg->width_pixels %
+ data_type_parameters.size_constraint_pixels != 0)
+ return -EINVAL;
+
+ *wc = compute_wc(frame_scfg->width_pixels,
+ data_type_parameters.size_constraint_pixels,
+ data_type_parameters.size_constraint_bytes);
+ unpacked_bytes = compute_unpacked_bytes(*wc,
+ data_type_parameters.bits_per_pclk);
+ ph_cfg.wc = *wc;
+ ph_cfg.data_mode = frame_scfg->data_mode;
+ ph_cfg.data_type = frame_scfg->data_type;
+ ph_cfg.dma_packed = frame_scfg->dma_packed;
+ ph_cfg.vchannel = frame_id;
+
+ mipi_tx_fg_section_cfg_regs(kmb_dsi, frame_id, section,
+ frame_scfg->height_lines,
+ unpacked_bytes, &ph_cfg);
+
+ /* Caller needs bits_per_clk for additional caluclations */
+ *bits_per_pclk = data_type_parameters.bits_per_pclk;
+
+ return 0;
+}
+
+#define CLK_DIFF_LOW 50
+#define CLK_DIFF_HI 60
+#define SYSCLK_500 500
+
+static void mipi_tx_fg_cfg_regs(struct kmb_dsi *kmb_dsi, u8 frame_gen,
+ struct mipi_tx_frame_timing_cfg *fg_cfg)
+{
+ u32 sysclk;
+ u32 ppl_llp_ratio;
+ u32 ctrl_no = MIPI_CTRL6, reg_adr, val, offset;
+
+ /* 500 Mhz system clock minus 50 to account for the difference in
+ * MIPI clock speed in RTL tests
+ */
+ if (kmb_dsi->sys_clk_mhz == SYSCLK_500) {
+ sysclk = kmb_dsi->sys_clk_mhz - CLK_DIFF_LOW;
+ } else {
+ /* 700 Mhz clk*/
+ sysclk = kmb_dsi->sys_clk_mhz - CLK_DIFF_HI;
+ }
+
+ /* PPL-Pixel Packing Layer, LLP-Low Level Protocol
+ * Frame genartor timing parameters are clocked on the system clock,
+ * whereas as the equivalent parameters in the LLP blocks are clocked
+ * on LLP Tx clock from the D-PHY - BYTE clock
+ */
+
+ /* Multiply by 1000 to maintain precision */
+ ppl_llp_ratio = ((fg_cfg->bpp / 8) * sysclk * 1000) /
+ ((fg_cfg->lane_rate_mbps / 8) * fg_cfg->active_lanes);
+
+ dev_dbg(kmb_dsi->dev, "ppl_llp_ratio=%d\n", ppl_llp_ratio);
+ dev_dbg(kmb_dsi->dev, "bpp=%d sysclk=%d lane-rate=%d active-lanes=%d\n",
+ fg_cfg->bpp, sysclk, fg_cfg->lane_rate_mbps,
+ fg_cfg->active_lanes);
+
+ /* Frame generator number of lines */
+ reg_adr = MIPI_TXm_HS_FGn_NUM_LINES(ctrl_no, frame_gen);
+ kmb_write_mipi(kmb_dsi, reg_adr, fg_cfg->v_active);
+
+ /* vsync width
+ * There are 2 registers for vsync width (VSA in lines for
+ * channels 0-3)
+ * REG_VSYNC_WIDTH0: [15:0]-VSA for channel0, [31:16]-VSA for channel1
+ * REG_VSYNC_WIDTH1: [15:0]-VSA for channel2, [31:16]-VSA for channel3
+ */
+ offset = (frame_gen % 2) * 16;
+ reg_adr = MIPI_TXm_HS_VSYNC_WIDTHn(ctrl_no, frame_gen / 2);
+ kmb_write_bits_mipi(kmb_dsi, reg_adr, offset, 16, fg_cfg->vsync_width);
+
+ /* vertical backporch (vbp) */
+ reg_adr = MIPI_TXm_HS_V_BACKPORCHESn(ctrl_no, frame_gen / 2);
+ kmb_write_bits_mipi(kmb_dsi, reg_adr, offset, 16, fg_cfg->v_backporch);
+
+ /* vertical frontporch (vfp) */
+ reg_adr = MIPI_TXm_HS_V_FRONTPORCHESn(ctrl_no, frame_gen / 2);
+ kmb_write_bits_mipi(kmb_dsi, reg_adr, offset, 16, fg_cfg->v_frontporch);
+
+ /* vertical active (vactive) */
+ reg_adr = MIPI_TXm_HS_V_ACTIVEn(ctrl_no, frame_gen / 2);
+ kmb_write_bits_mipi(kmb_dsi, reg_adr, offset, 16, fg_cfg->v_active);
+
+ /* hsync width */
+ reg_adr = MIPI_TXm_HS_HSYNC_WIDTHn(ctrl_no, frame_gen);
+ kmb_write_mipi(kmb_dsi, reg_adr,
+ (fg_cfg->hsync_width * ppl_llp_ratio) / 1000);
+
+ /* horizontal backporch (hbp) */
+ reg_adr = MIPI_TXm_HS_H_BACKPORCHn(ctrl_no, frame_gen);
+ kmb_write_mipi(kmb_dsi, reg_adr,
+ (fg_cfg->h_backporch * ppl_llp_ratio) / 1000);
+
+ /* horizontal frontporch (hfp) */
+ reg_adr = MIPI_TXm_HS_H_FRONTPORCHn(ctrl_no, frame_gen);
+ kmb_write_mipi(kmb_dsi, reg_adr,
+ (fg_cfg->h_frontporch * ppl_llp_ratio) / 1000);
+
+ /* horizontal active (ha) */
+ reg_adr = MIPI_TXm_HS_H_ACTIVEn(ctrl_no, frame_gen);
+
+ /* convert h_active which is wc in bytes to cycles */
+ val = (fg_cfg->h_active * sysclk * 1000) /
+ ((fg_cfg->lane_rate_mbps / 8) * fg_cfg->active_lanes);
+ val /= 1000;
+ kmb_write_mipi(kmb_dsi, reg_adr, val);
+
+ /* llp hsync width */
+ reg_adr = MIPI_TXm_HS_LLP_HSYNC_WIDTHn(ctrl_no, frame_gen);
+ kmb_write_mipi(kmb_dsi, reg_adr, fg_cfg->hsync_width * (fg_cfg->bpp / 8));
+
+ /* llp h backporch */
+ reg_adr = MIPI_TXm_HS_LLP_H_BACKPORCHn(ctrl_no, frame_gen);
+ kmb_write_mipi(kmb_dsi, reg_adr, fg_cfg->h_backporch * (fg_cfg->bpp / 8));
+
+ /* llp h frontporch */
+ reg_adr = MIPI_TXm_HS_LLP_H_FRONTPORCHn(ctrl_no, frame_gen);
+ kmb_write_mipi(kmb_dsi, reg_adr,
+ fg_cfg->h_frontporch * (fg_cfg->bpp / 8));
+}
+
+static void mipi_tx_fg_cfg(struct kmb_dsi *kmb_dsi, u8 frame_gen,
+ u8 active_lanes, u32 bpp, u32 wc,
+ u32 lane_rate_mbps, struct mipi_tx_frame_cfg *fg_cfg)
+{
+ u32 i, fg_num_lines = 0;
+ struct mipi_tx_frame_timing_cfg fg_t_cfg;
+
+ /* Calculate the total frame generator number of
+ * lines based on it's active sections
+ */
+ for (i = 0; i < MIPI_TX_FRAME_GEN_SECTIONS; i++) {
+ if (fg_cfg->sections[i])
+ fg_num_lines += fg_cfg->sections[i]->height_lines;
+ }
+
+ fg_t_cfg.bpp = bpp;
+ fg_t_cfg.lane_rate_mbps = lane_rate_mbps;
+ fg_t_cfg.hsync_width = fg_cfg->hsync_width;
+ fg_t_cfg.h_backporch = fg_cfg->h_backporch;
+ fg_t_cfg.h_frontporch = fg_cfg->h_frontporch;
+ fg_t_cfg.h_active = wc;
+ fg_t_cfg.vsync_width = fg_cfg->vsync_width;
+ fg_t_cfg.v_backporch = fg_cfg->v_backporch;
+ fg_t_cfg.v_frontporch = fg_cfg->v_frontporch;
+ fg_t_cfg.v_active = fg_num_lines;
+ fg_t_cfg.active_lanes = active_lanes;
+
+ /* Apply frame generator timing setting */
+ mipi_tx_fg_cfg_regs(kmb_dsi, frame_gen, &fg_t_cfg);
+}
+
+static void mipi_tx_multichannel_fifo_cfg(struct kmb_dsi *kmb_dsi,
+ u8 active_lanes, u8 vchannel_id)
+{
+ u32 fifo_size, fifo_rthreshold;
+ u32 ctrl_no = MIPI_CTRL6;
+
+ /* Clear all mc fifo channel sizes and thresholds */
+ kmb_write_mipi(kmb_dsi, MIPI_TX_HS_MC_FIFO_CTRL_EN, 0);
+ kmb_write_mipi(kmb_dsi, MIPI_TX_HS_MC_FIFO_CHAN_ALLOC0, 0);
+ kmb_write_mipi(kmb_dsi, MIPI_TX_HS_MC_FIFO_CHAN_ALLOC1, 0);
+ kmb_write_mipi(kmb_dsi, MIPI_TX_HS_MC_FIFO_RTHRESHOLD0, 0);
+ kmb_write_mipi(kmb_dsi, MIPI_TX_HS_MC_FIFO_RTHRESHOLD1, 0);
+
+ fifo_size = ((active_lanes > MIPI_D_LANES_PER_DPHY) ?
+ MIPI_CTRL_4LANE_MAX_MC_FIFO_LOC :
+ MIPI_CTRL_2LANE_MAX_MC_FIFO_LOC) - 1;
+
+ /* MC fifo size for virtual channels 0-3
+ * REG_MC_FIFO_CHAN_ALLOC0: [8:0]-channel0, [24:16]-channel1
+ * REG_MC_FIFO_CHAN_ALLOC1: [8:0]-2, [24:16]-channel3
+ */
+ SET_MC_FIFO_CHAN_ALLOC(kmb_dsi, ctrl_no, vchannel_id, fifo_size);
+
+ /* Set threshold to half the fifo size, actual size=size*16 */
+ fifo_rthreshold = ((fifo_size) * 8) & BIT_MASK_16;
+ SET_MC_FIFO_RTHRESHOLD(kmb_dsi, ctrl_no, vchannel_id, fifo_rthreshold);
+
+ /* Enable the MC FIFO channel corresponding to the Virtual Channel */
+ kmb_set_bit_mipi(kmb_dsi, MIPI_TXm_HS_MC_FIFO_CTRL_EN(ctrl_no),
+ vchannel_id);
+}
+
+static void mipi_tx_ctrl_cfg(struct kmb_dsi *kmb_dsi, u8 fg_id,
+ struct mipi_ctrl_cfg *ctrl_cfg)
+{
+ u32 sync_cfg = 0, ctrl = 0, fg_en;
+ u32 ctrl_no = MIPI_CTRL6;
+
+ /* MIPI_TX_HS_SYNC_CFG */
+ if (ctrl_cfg->tx_ctrl_cfg.line_sync_pkt_en)
+ sync_cfg |= LINE_SYNC_PKT_ENABLE;
+ if (ctrl_cfg->tx_ctrl_cfg.frame_counter_active)
+ sync_cfg |= FRAME_COUNTER_ACTIVE;
+ if (ctrl_cfg->tx_ctrl_cfg.line_counter_active)
+ sync_cfg |= LINE_COUNTER_ACTIVE;
+ if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->v_blanking)
+ sync_cfg |= DSI_V_BLANKING;
+ if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->hsa_blanking)
+ sync_cfg |= DSI_HSA_BLANKING;
+ if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->hbp_blanking)
+ sync_cfg |= DSI_HBP_BLANKING;
+ if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->hfp_blanking)
+ sync_cfg |= DSI_HFP_BLANKING;
+ if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->sync_pulse_eventn)
+ sync_cfg |= DSI_SYNC_PULSE_EVENTN;
+ if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->lpm_first_vsa_line)
+ sync_cfg |= DSI_LPM_FIRST_VSA_LINE;
+ if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->lpm_last_vfp_line)
+ sync_cfg |= DSI_LPM_LAST_VFP_LINE;
+
+ /* Enable frame generator */
+ fg_en = 1 << fg_id;
+ sync_cfg |= FRAME_GEN_EN(fg_en);
+
+ if (ctrl_cfg->tx_ctrl_cfg.tx_always_use_hact)
+ sync_cfg |= ALWAYS_USE_HACT(fg_en);
+ if (ctrl_cfg->tx_ctrl_cfg.tx_hact_wait_stop)
+ sync_cfg |= HACT_WAIT_STOP(fg_en);
+
+ dev_dbg(kmb_dsi->dev, "sync_cfg=%d fg_en=%d\n", sync_cfg, fg_en);
+
+ /* MIPI_TX_HS_CTRL */
+
+ /* type:DSI, source:LCD */
+ ctrl = HS_CTRL_EN | TX_SOURCE;
+ ctrl |= LCD_VC(fg_id);
+ ctrl |= ACTIVE_LANES(ctrl_cfg->active_lanes - 1);
+ if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->eotp_en)
+ ctrl |= DSI_EOTP_EN;
+ if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->hfp_blank_en)
+ ctrl |= DSI_CMD_HFP_EN;
+
+ /*67 ns stop time */
+ ctrl |= HSEXIT_CNT(0x43);
+
+ kmb_write_mipi(kmb_dsi, MIPI_TXm_HS_SYNC_CFG(ctrl_no), sync_cfg);
+ kmb_write_mipi(kmb_dsi, MIPI_TXm_HS_CTRL(ctrl_no), ctrl);
+}
+
+static u32 mipi_tx_init_cntrl(struct kmb_dsi *kmb_dsi,
+ struct mipi_ctrl_cfg *ctrl_cfg)
+{
+ u32 ret = 0;
+ u8 active_vchannels = 0;
+ u8 frame_id, sect;
+ u32 bits_per_pclk = 0;
+ u32 word_count = 0;
+ struct mipi_tx_frame_cfg *frame;
+
+ /* This is the order to initialize MIPI TX:
+ * 1. set frame section parameters
+ * 2. set frame specific parameters
+ * 3. connect lcd to mipi
+ * 4. multi channel fifo cfg
+ * 5. set mipitxcctrlcfg
+ */
+
+ for (frame_id = 0; frame_id < 4; frame_id++) {
+ frame = ctrl_cfg->tx_ctrl_cfg.frames[frame_id];
+
+ /* Find valid frame, assume only one valid frame */
+ if (!frame)
+ continue;
+
+ /* Frame Section configuration */
+ /* TODO - assume there is only one valid section in a frame,
+ * so bits_per_pclk and word_count are only set once
+ */
+ for (sect = 0; sect < MIPI_CTRL_VIRTUAL_CHANNELS; sect++) {
+ if (!frame->sections[sect])
+ continue;
+
+ ret = mipi_tx_fg_section_cfg(kmb_dsi, frame_id, sect,
+ frame->sections[sect],
+ &bits_per_pclk,
+ &word_count);
+ if (ret)
+ return ret;
+ }
+
+ /* Set frame specific parameters */
+ mipi_tx_fg_cfg(kmb_dsi, frame_id, ctrl_cfg->active_lanes,
+ bits_per_pclk, word_count,
+ ctrl_cfg->lane_rate_mbps, frame);
+
+ active_vchannels++;
+
+ /* Stop iterating as only one virtual channel
+ * shall be used for LCD connection
+ */
+ break;
+ }
+
+ if (active_vchannels == 0)
+ return -EINVAL;
+ /* Multi-Channel FIFO Configuration */
+ mipi_tx_multichannel_fifo_cfg(kmb_dsi, ctrl_cfg->active_lanes, frame_id);
+
+ /* Frame Generator Enable */
+ mipi_tx_ctrl_cfg(kmb_dsi, frame_id, ctrl_cfg);
+
+ return ret;
+}
+
+static void test_mode_send(struct kmb_dsi *kmb_dsi, u32 dphy_no,
+ u32 test_code, u32 test_data)
+{
+ /* Steps to send test code:
+ * - set testclk HIGH
+ * - set testdin with test code
+ * - set testen HIGH
+ * - set testclk LOW
+ * - set testen LOW
+ */
+
+ /* Set testclk high */
+ SET_DPHY_TEST_CTRL1_CLK(kmb_dsi, dphy_no);
+
+ /* Set testdin */
+ SET_TEST_DIN0_3(kmb_dsi, dphy_no, test_code);
+
+ /* Set testen high */
+ SET_DPHY_TEST_CTRL1_EN(kmb_dsi, dphy_no);
+
+ /* Set testclk low */
+ CLR_DPHY_TEST_CTRL1_CLK(kmb_dsi, dphy_no);
+
+ /* Set testen low */
+ CLR_DPHY_TEST_CTRL1_EN(kmb_dsi, dphy_no);
+
+ if (test_code) {
+ /* Steps to send test data:
+ * - set testen LOW
+ * - set testclk LOW
+ * - set testdin with data
+ * - set testclk HIGH
+ */
+
+ /* Set testen low */
+ CLR_DPHY_TEST_CTRL1_EN(kmb_dsi, dphy_no);
+
+ /* Set testclk low */
+ CLR_DPHY_TEST_CTRL1_CLK(kmb_dsi, dphy_no);
+
+ /* Set data in testdin */
+ kmb_write_mipi(kmb_dsi,
+ DPHY_TEST_DIN0_3 + ((dphy_no / 0x4) * 0x4),
+ test_data << ((dphy_no % 4) * 8));
+
+ /* Set testclk high */
+ SET_DPHY_TEST_CTRL1_CLK(kmb_dsi, dphy_no);
+ }
+}
+
+static inline void
+ set_test_mode_src_osc_freq_target_low_bits(struct kmb_dsi *kmb_dsi,
+ u32 dphy_no,
+ u32 freq)
+{
+ /* Typical rise/fall time=166, refer Table 1207 databook,
+ * sr_osc_freq_target[7:0]
+ */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_SLEW_RATE_DDL_CYCLES,
+ (freq & 0x7f));
+}
+
+static inline void
+ set_test_mode_src_osc_freq_target_hi_bits(struct kmb_dsi *kmb_dsi,
+ u32 dphy_no,
+ u32 freq)
+{
+ u32 data;
+
+ /* Flag this as high nibble */
+ data = ((freq >> 6) & 0x1f) | (1 << 7);
+
+ /* Typical rise/fall time=166, refer Table 1207 databook,
+ * sr_osc_freq_target[11:7]
+ */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_SLEW_RATE_DDL_CYCLES, data);
+}
+
+static void mipi_tx_get_vco_params(struct vco_params *vco)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vco_table); i++) {
+ if (vco->freq < vco_table[i].freq) {
+ *vco = vco_table[i];
+ return;
+ }
+ }
+
+ WARN_ONCE(1, "Invalid vco freq = %u for PLL setup\n", vco->freq);
+}
+
+static void mipi_tx_pll_setup(struct kmb_dsi *kmb_dsi, u32 dphy_no,
+ u32 ref_clk_mhz, u32 target_freq_mhz)
+{
+ u32 best_n = 0, best_m = 0;
+ u32 n = 0, m = 0, div = 0, delta, freq = 0, t_freq;
+ u32 best_freq_delta = 3000;
+
+ /* pll_ref_clk: - valid range: 2~64 MHz; Typically 24 MHz
+ * Fvco: - valid range: 320~1250 MHz (Gen3 D-PHY)
+ * Fout: - valid range: 40~1250 MHz (Gen3 D-PHY)
+ * n: - valid range [0 15]
+ * N: - N = n + 1
+ * -valid range: [1 16]
+ * -conditions: - (pll_ref_clk / N) >= 2 MHz
+ * -(pll_ref_clk / N) <= 8 MHz
+ * m: valid range [62 623]
+ * M: - M = m + 2
+ * -valid range [64 625]
+ * -Fvco = (M/N) * pll_ref_clk
+ */
+ struct vco_params vco_p = {
+ .range = 0,
+ .divider = 1,
+ };
+
+ vco_p.freq = target_freq_mhz;
+ mipi_tx_get_vco_params(&vco_p);
+
+ /* Search pll n parameter */
+ for (n = PLL_N_MIN; n <= PLL_N_MAX; n++) {
+ /* Calculate the pll input frequency division ratio
+ * multiply by 1000 for precision -
+ * no floating point, add n for rounding
+ */
+ div = ((ref_clk_mhz * 1000) + n) / (n + 1);
+
+ /* Found a valid n parameter */
+ if ((div < 2000 || div > 8000))
+ continue;
+
+ /* Search pll m parameter */
+ for (m = PLL_M_MIN; m <= PLL_M_MAX; m++) {
+ /* Calculate the Fvco(DPHY PLL output frequency)
+ * using the current n,m params
+ */
+ freq = div * (m + 2);
+ freq /= 1000;
+
+ /* Trim the potential pll freq to max supported */
+ if (freq > PLL_FVCO_MAX)
+ continue;
+
+ delta = abs(freq - target_freq_mhz);
+
+ /* Select the best (closest to target pll freq)
+ * n,m parameters so far
+ */
+ if (delta < best_freq_delta) {
+ best_n = n;
+ best_m = m;
+ best_freq_delta = delta;
+ }
+ }
+ }
+
+ /* Program vco_cntrl parameter
+ * PLL_VCO_Control[5:0] = pll_vco_cntrl_ovr,
+ * PLL_VCO_Control[6] = pll_vco_cntrl_ovr_en
+ */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_VCO_CTRL, (vco_p.range
+ | (1 << 6)));
+
+ /* Program m, n pll parameters */
+ dev_dbg(kmb_dsi->dev, "m = %d n = %d\n", best_m, best_n);
+
+ /* PLL_Input_Divider_Ratio[3:0] = pll_n_ovr */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_INPUT_DIVIDER,
+ (best_n & 0x0f));
+
+ /* m - low nibble PLL_Loop_Divider_Ratio[4:0]
+ * pll_m_ovr[4:0]
+ */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_FEEDBACK_DIVIDER,
+ (best_m & 0x1f));
+
+ /* m - high nibble PLL_Loop_Divider_Ratio[4:0]
+ * pll_m_ovr[9:5]
+ */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_FEEDBACK_DIVIDER,
+ ((best_m >> 5) & 0x1f) | PLL_FEEDBACK_DIVIDER_HIGH);
+
+ /* Enable overwrite of n,m parameters :pll_n_ovr_en, pll_m_ovr_en */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_OUTPUT_CLK_SEL,
+ (PLL_N_OVR_EN | PLL_M_OVR_EN));
+
+ /* Program Charge-Pump parameters */
+
+ /* pll_prop_cntrl-fixed values for prop_cntrl from DPHY doc */
+ t_freq = target_freq_mhz * vco_p.divider;
+ test_mode_send(kmb_dsi, dphy_no,
+ TEST_CODE_PLL_PROPORTIONAL_CHARGE_PUMP_CTRL,
+ ((t_freq > 1150) ? 0x0C : 0x0B));
+
+ /* pll_int_cntrl-fixed value for int_cntrl from DPHY doc */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_INTEGRAL_CHARGE_PUMP_CTRL,
+ 0x00);
+
+ /* pll_gmp_cntrl-fixed value for gmp_cntrl from DPHY doci */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_GMP_CTRL, 0x10);
+
+ /* pll_cpbias_cntrl-fixed value for cpbias_cntrl from DPHY doc */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_CHARGE_PUMP_BIAS, 0x10);
+
+ /* pll_th1 -Lock Detector Phase error threshold,
+ * document gives fixed value
+ */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_PHASE_ERR_CTRL, 0x02);
+
+ /* PLL Lock Configuration */
+
+ /* pll_th2 - Lock Filter length, document gives fixed value */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_LOCK_FILTER, 0x60);
+
+ /* pll_th3- PLL Unlocking filter, document gives fixed value */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_UNLOCK_FILTER, 0x03);
+
+ /* pll_lock_sel-PLL Lock Detector Selection,
+ * document gives fixed value
+ */
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_PLL_LOCK_DETECTOR, 0x02);
+}
+
+static void set_slewrate_gt_1500(struct kmb_dsi *kmb_dsi, u32 dphy_no)
+{
+ u32 test_code = 0, test_data = 0;
+ /* Bypass slew rate calibration algorithm
+ * bits[1:0} srcal_en_ovr_en, srcal_en_ovr
+ */
+ test_code = TEST_CODE_SLEW_RATE_OVERRIDE_CTRL;
+ test_data = 0x02;
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* Disable slew rate calibration */
+ test_code = TEST_CODE_SLEW_RATE_DDL_LOOP_CTRL;
+ test_data = 0x00;
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+}
+
+static void set_slewrate_gt_1000(struct kmb_dsi *kmb_dsi, u32 dphy_no)
+{
+ u32 test_code = 0, test_data = 0;
+
+ /* BitRate: > 1 Gbps && <= 1.5 Gbps: - slew rate control ON
+ * typical rise/fall times: 166 ps
+ */
+
+ /* Do not bypass slew rate calibration algorithm
+ * bits[1:0}=srcal_en_ovr_en, srcal_en_ovr, bit[6]=sr_range
+ */
+ test_code = TEST_CODE_SLEW_RATE_OVERRIDE_CTRL;
+ test_data = (0x03 | (1 << 6));
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* Enable slew rate calibration */
+ test_code = TEST_CODE_SLEW_RATE_DDL_LOOP_CTRL;
+ test_data = 0x01;
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* Set sr_osc_freq_target[6:0] low nibble
+ * typical rise/fall time=166, refer Table 1207 databook
+ */
+ test_code = TEST_CODE_SLEW_RATE_DDL_CYCLES;
+ test_data = (0x72f & 0x7f);
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* Set sr_osc_freq_target[11:7] high nibble
+ * Typical rise/fall time=166, refer Table 1207 databook
+ */
+ test_code = TEST_CODE_SLEW_RATE_DDL_CYCLES;
+ test_data = ((0x72f >> 6) & 0x1f) | (1 << 7);
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+}
+
+static void set_slewrate_lt_1000(struct kmb_dsi *kmb_dsi, u32 dphy_no)
+{
+ u32 test_code = 0, test_data = 0;
+
+ /* lane_rate_mbps <= 1000 Mbps
+ * BitRate: <= 1 Gbps:
+ * - slew rate control ON
+ * - typical rise/fall times: 225 ps
+ */
+
+ /* Do not bypass slew rate calibration algorithm */
+ test_code = TEST_CODE_SLEW_RATE_OVERRIDE_CTRL;
+ test_data = (0x03 | (1 << 6));
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* Enable slew rate calibration */
+ test_code = TEST_CODE_SLEW_RATE_DDL_LOOP_CTRL;
+ test_data = 0x01;
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* Typical rise/fall time=255, refer Table 1207 databook */
+ test_code = TEST_CODE_SLEW_RATE_DDL_CYCLES;
+ test_data = (0x523 & 0x7f);
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* Set sr_osc_freq_target[11:7] high nibble */
+ test_code = TEST_CODE_SLEW_RATE_DDL_CYCLES;
+ test_data = ((0x523 >> 6) & 0x1f) | (1 << 7);
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+}
+
+static void setup_pll(struct kmb_dsi *kmb_dsi, u32 dphy_no,
+ struct mipi_ctrl_cfg *cfg)
+{
+ u32 test_code = 0, test_data = 0;
+
+ /* Set PLL regulator in bypass */
+ test_code = TEST_CODE_PLL_ANALOG_PROG;
+ test_data = 0x01;
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* PLL Parameters Setup */
+ mipi_tx_pll_setup(kmb_dsi, dphy_no, cfg->ref_clk_khz / 1000,
+ cfg->lane_rate_mbps / 2);
+
+ /* Set clksel */
+ kmb_write_bits_mipi(kmb_dsi, DPHY_INIT_CTRL1, PLL_CLKSEL_0, 2, 0x01);
+
+ /* Set pll_shadow_control */
+ kmb_set_bit_mipi(kmb_dsi, DPHY_INIT_CTRL1, PLL_SHADOW_CTRL);
+}
+
+static void set_lane_data_rate(struct kmb_dsi *kmb_dsi, u32 dphy_no,
+ struct mipi_ctrl_cfg *cfg)
+{
+ u32 i, test_code = 0, test_data = 0;
+
+ for (i = 0; i < MIPI_DPHY_DEFAULT_BIT_RATES; i++) {
+ if (mipi_hs_freq_range[i].default_bit_rate_mbps <
+ cfg->lane_rate_mbps)
+ continue;
+
+ /* Send the test code and data */
+ /* bit[6:0] = hsfreqrange_ovr bit[7] = hsfreqrange_ovr_en */
+ test_code = TEST_CODE_HS_FREQ_RANGE_CFG;
+ test_data = (mipi_hs_freq_range[i].hsfreqrange_code & 0x7f) |
+ (1 << 7);
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+ break;
+ }
+}
+
+static void dphy_init_sequence(struct kmb_dsi *kmb_dsi,
+ struct mipi_ctrl_cfg *cfg, u32 dphy_no,
+ int active_lanes, enum dphy_mode mode)
+{
+ u32 test_code = 0, test_data = 0, val;
+
+ /* Set D-PHY in shutdown mode */
+ /* Assert RSTZ signal */
+ CLR_DPHY_INIT_CTRL0(kmb_dsi, dphy_no, RESETZ);
+
+ /* Assert SHUTDOWNZ signal */
+ CLR_DPHY_INIT_CTRL0(kmb_dsi, dphy_no, SHUTDOWNZ);
+ val = kmb_read_mipi(kmb_dsi, DPHY_INIT_CTRL0);
+
+ /* Init D-PHY_n
+ * Pulse testclear signal to make sure the d-phy configuration
+ * starts from a clean base
+ */
+ CLR_DPHY_TEST_CTRL0(kmb_dsi, dphy_no);
+ ndelay(15);
+ SET_DPHY_TEST_CTRL0(kmb_dsi, dphy_no);
+ ndelay(15);
+ CLR_DPHY_TEST_CTRL0(kmb_dsi, dphy_no);
+ ndelay(15);
+
+ /* Set mastermacro bit - Master or slave mode */
+ test_code = TEST_CODE_MULTIPLE_PHY_CTRL;
+
+ /* DPHY has its own clock lane enabled (master) */
+ if (mode == MIPI_DPHY_MASTER)
+ test_data = 0x01;
+ else
+ test_data = 0x00;
+
+ /* Send the test code and data */
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* Set the lane data rate */
+ set_lane_data_rate(kmb_dsi, dphy_no, cfg);
+
+ /* High-Speed Tx Slew Rate Calibration
+ * BitRate: > 1.5 Gbps && <= 2.5 Gbps: slew rate control OFF
+ */
+ if (cfg->lane_rate_mbps > 1500)
+ set_slewrate_gt_1500(kmb_dsi, dphy_no);
+ else if (cfg->lane_rate_mbps > 1000)
+ set_slewrate_gt_1000(kmb_dsi, dphy_no);
+ else
+ set_slewrate_lt_1000(kmb_dsi, dphy_no);
+
+ /* Set cfgclkfreqrange */
+ val = (((cfg->cfg_clk_khz / 1000) - 17) * 4) & 0x3f;
+ SET_DPHY_FREQ_CTRL0_3(kmb_dsi, dphy_no, val);
+
+ /* Enable config clk for the corresponding d-phy */
+ kmb_set_bit_mipi(kmb_dsi, DPHY_CFG_CLK_EN, dphy_no);
+
+ /* PLL setup */
+ if (mode == MIPI_DPHY_MASTER)
+ setup_pll(kmb_dsi, dphy_no, cfg);
+
+ /* Send NORMAL OPERATION test code */
+ test_code = 0x0;
+ test_data = 0x0;
+ test_mode_send(kmb_dsi, dphy_no, test_code, test_data);
+
+ /* Configure BASEDIR for data lanes
+ * NOTE: basedir only applies to LANE_0 of each D-PHY.
+ * The other lanes keep their direction based on the D-PHY type,
+ * either Rx or Tx.
+ * bits[5:0] - BaseDir: 1 = Rx
+ * bits[9:6] - BaseDir: 0 = Tx
+ */
+ kmb_write_bits_mipi(kmb_dsi, DPHY_INIT_CTRL2, 0, 9, 0x03f);
+ ndelay(15);
+
+ /* Enable CLOCK LANE
+ * Clock lane should be enabled regardless of the direction
+ * set for the D-PHY (Rx/Tx)
+ */
+ kmb_set_bit_mipi(kmb_dsi, DPHY_INIT_CTRL2, 12 + dphy_no);
+
+ /* Enable DATA LANES */
+ kmb_write_bits_mipi(kmb_dsi, DPHY_ENABLE, dphy_no * 2, 2,
+ ((1 << active_lanes) - 1));
+
+ ndelay(15);
+
+ /* Take D-PHY out of shutdown mode */
+ /* Deassert SHUTDOWNZ signal */
+ SET_DPHY_INIT_CTRL0(kmb_dsi, dphy_no, SHUTDOWNZ);
+ ndelay(15);
+
+ /* Deassert RSTZ signal */
+ SET_DPHY_INIT_CTRL0(kmb_dsi, dphy_no, RESETZ);
+}
+
+static void dphy_wait_fsm(struct kmb_dsi *kmb_dsi, u32 dphy_no,
+ enum dphy_tx_fsm fsm_state)
+{
+ enum dphy_tx_fsm val = DPHY_TX_POWERDWN;
+ int i = 0;
+ int status = 1;
+
+ do {
+ test_mode_send(kmb_dsi, dphy_no, TEST_CODE_FSM_CONTROL, 0x80);
+
+ val = GET_TEST_DOUT4_7(kmb_dsi, dphy_no);
+ i++;
+ if (i > TIMEOUT) {
+ status = 0;
+ break;
+ }
+ } while (val != fsm_state);
+
+ dev_dbg(kmb_dsi->dev, "%s: dphy %d val = %x", __func__, dphy_no, val);
+ dev_dbg(kmb_dsi->dev, "* DPHY %d WAIT_FSM %s *",
+ dphy_no, status ? "SUCCESS" : "FAILED");
+}
+
+static void wait_init_done(struct kmb_dsi *kmb_dsi, u32 dphy_no,
+ u32 active_lanes)
+{
+ u32 stopstatedata = 0;
+ u32 data_lanes = (1 << active_lanes) - 1;
+ int i = 0;
+ int status = 1;
+
+ do {
+ stopstatedata = GET_STOPSTATE_DATA(kmb_dsi, dphy_no)
+ & data_lanes;
+
+ /* TODO-need to add a time out and return failure */
+ i++;
+
+ if (i > TIMEOUT) {
+ status = 0;
+ dev_dbg(kmb_dsi->dev,
+ "! WAIT_INIT_DONE: TIMING OUT!(err_stat=%d)",
+ kmb_read_mipi(kmb_dsi, MIPI_DPHY_ERR_STAT6_7));
+ break;
+ }
+ } while (stopstatedata != data_lanes);
+
+ dev_dbg(kmb_dsi->dev, "* DPHY %d INIT - %s *",
+ dphy_no, status ? "SUCCESS" : "FAILED");
+}
+
+static void wait_pll_lock(struct kmb_dsi *kmb_dsi, u32 dphy_no)
+{
+ int i = 0;
+ int status = 1;
+
+ do {
+ /* TODO-need to add a time out and return failure */
+ i++;
+ if (i > TIMEOUT) {
+ status = 0;
+ dev_dbg(kmb_dsi->dev, "%s: timing out", __func__);
+ break;
+ }
+ } while (!GET_PLL_LOCK(kmb_dsi, dphy_no));
+
+ dev_dbg(kmb_dsi->dev, "* PLL Locked for DPHY %d - %s *",
+ dphy_no, status ? "SUCCESS" : "FAILED");
+}
+
+static u32 mipi_tx_init_dphy(struct kmb_dsi *kmb_dsi,
+ struct mipi_ctrl_cfg *cfg)
+{
+ u32 dphy_no = MIPI_DPHY6;
+
+ /* Multiple D-PHYs needed */
+ if (cfg->active_lanes > MIPI_DPHY_D_LANES) {
+ /*
+ *Initialization for Tx aggregation mode is done according to
+ *a. start init PHY1
+ *b. poll for PHY1 FSM state LOCK
+ * b1. reg addr 0x03[3:0] - state_main[3:0] == 5 (LOCK)
+ *c. poll for PHY1 calibrations done :
+ * c1. termination calibration lower section: addr 0x22[5]
+ * - rescal_done
+ * c2. slewrate calibration (if data rate < = 1500 Mbps):
+ * addr 0xA7[3:2] - srcal_done, sr_finished
+ *d. start init PHY0
+ *e. poll for PHY0 stopstate
+ *f. poll for PHY1 stopstate
+ */
+ /* PHY #N+1 ('slave') */
+
+ dphy_init_sequence(kmb_dsi, cfg, dphy_no + 1,
+ (cfg->active_lanes - MIPI_DPHY_D_LANES),
+ MIPI_DPHY_SLAVE);
+ dphy_wait_fsm(kmb_dsi, dphy_no + 1, DPHY_TX_LOCK);
+
+ /* PHY #N master */
+ dphy_init_sequence(kmb_dsi, cfg, dphy_no, MIPI_DPHY_D_LANES,
+ MIPI_DPHY_MASTER);
+
+ /* Wait for DPHY init to complete */
+ wait_init_done(kmb_dsi, dphy_no, MIPI_DPHY_D_LANES);
+ wait_init_done(kmb_dsi, dphy_no + 1,
+ cfg->active_lanes - MIPI_DPHY_D_LANES);
+ wait_pll_lock(kmb_dsi, dphy_no);
+ wait_pll_lock(kmb_dsi, dphy_no + 1);
+ dphy_wait_fsm(kmb_dsi, dphy_no, DPHY_TX_IDLE);
+ } else { /* Single DPHY */
+ dphy_init_sequence(kmb_dsi, cfg, dphy_no, cfg->active_lanes,
+ MIPI_DPHY_MASTER);
+ dphy_wait_fsm(kmb_dsi, dphy_no, DPHY_TX_IDLE);
+ wait_init_done(kmb_dsi, dphy_no, cfg->active_lanes);
+ wait_pll_lock(kmb_dsi, dphy_no);
+ }
+
+ return 0;
+}
+
+static void connect_lcd_to_mipi(struct kmb_dsi *kmb_dsi,
+ struct drm_atomic_state *old_state)
+{
+ struct regmap *msscam;
+
+ msscam = syscon_regmap_lookup_by_compatible("intel,keembay-msscam");
+ if (IS_ERR(msscam)) {
+ dev_dbg(kmb_dsi->dev, "failed to get msscam syscon");
+ return;
+ }
+ drm_atomic_bridge_chain_enable(adv_bridge, old_state);
+ /* DISABLE MIPI->CIF CONNECTION */
+ regmap_write(msscam, MSS_MIPI_CIF_CFG, 0);
+
+ /* ENABLE LCD->MIPI CONNECTION */
+ regmap_write(msscam, MSS_LCD_MIPI_CFG, 1);
+ /* DISABLE LCD->CIF LOOPBACK */
+ regmap_write(msscam, MSS_LOOPBACK_CFG, 1);
+}
+
+int kmb_dsi_mode_set(struct kmb_dsi *kmb_dsi, struct drm_display_mode *mode,
+ int sys_clk_mhz, struct drm_atomic_state *old_state)
+{
+ u64 data_rate;
+
+ kmb_dsi->sys_clk_mhz = sys_clk_mhz;
+ mipi_tx_init_cfg.active_lanes = MIPI_TX_ACTIVE_LANES;
+
+ mipi_tx_frame0_sect_cfg.width_pixels = mode->crtc_hdisplay;
+ mipi_tx_frame0_sect_cfg.height_lines = mode->crtc_vdisplay;
+ mipitx_frame0_cfg.vsync_width =
+ mode->crtc_vsync_end - mode->crtc_vsync_start;
+ mipitx_frame0_cfg.v_backporch =
+ mode->crtc_vtotal - mode->crtc_vsync_end;
+ mipitx_frame0_cfg.v_frontporch =
+ mode->crtc_vsync_start - mode->crtc_vdisplay;
+ mipitx_frame0_cfg.hsync_width =
+ mode->crtc_hsync_end - mode->crtc_hsync_start;
+ mipitx_frame0_cfg.h_backporch =
+ mode->crtc_htotal - mode->crtc_hsync_end;
+ mipitx_frame0_cfg.h_frontporch =
+ mode->crtc_hsync_start - mode->crtc_hdisplay;
+
+ /* Lane rate = (vtotal*htotal*fps*bpp)/4 / 1000000
+ * to convert to Mbps
+ */
+ data_rate = ((((u32)mode->crtc_vtotal * (u32)mode->crtc_htotal) *
+ (u32)(drm_mode_vrefresh(mode)) *
+ MIPI_TX_BPP) / mipi_tx_init_cfg.active_lanes) / 1000000;
+
+ dev_dbg(kmb_dsi->dev, "data_rate=%u active_lanes=%d\n",
+ (u32)data_rate, mipi_tx_init_cfg.active_lanes);
+
+ /* When late rate < 800, modeset fails with 4 lanes,
+ * so switch to 2 lanes
+ */
+ if (data_rate < 800) {
+ mipi_tx_init_cfg.active_lanes = 2;
+ mipi_tx_init_cfg.lane_rate_mbps = data_rate * 2;
+ } else {
+ mipi_tx_init_cfg.lane_rate_mbps = data_rate;
+ }
+
+ /* Initialize mipi controller */
+ mipi_tx_init_cntrl(kmb_dsi, &mipi_tx_init_cfg);
+
+ /* Dphy initialization */
+ mipi_tx_init_dphy(kmb_dsi, &mipi_tx_init_cfg);
+
+ connect_lcd_to_mipi(kmb_dsi, old_state);
+ dev_info(kmb_dsi->dev, "mipi hw initialized");
+
+ return 0;
+}
+
+struct kmb_dsi *kmb_dsi_init(struct platform_device *pdev)
+{
+ struct kmb_dsi *kmb_dsi;
+ struct device *dev = get_device(&pdev->dev);
+
+ kmb_dsi = devm_kzalloc(dev, sizeof(*kmb_dsi), GFP_KERNEL);
+ if (!kmb_dsi) {
+ dev_err(dev, "failed to allocate kmb_dsi\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ kmb_dsi->host = dsi_host;
+ kmb_dsi->host->ops = &kmb_dsi_host_ops;
+
+ dsi_device->host = kmb_dsi->host;
+ kmb_dsi->device = dsi_device;
+
+ return kmb_dsi;
+}
+
+int kmb_dsi_encoder_init(struct drm_device *dev, struct kmb_dsi *kmb_dsi)
+{
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+ int ret = 0;
+
+ encoder = &kmb_dsi->base;
+ encoder->possible_crtcs = 1;
+ encoder->possible_clones = 0;
+
+ ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DSI);
+ if (ret) {
+ dev_err(kmb_dsi->dev, "Failed to init encoder %d\n", ret);
+ return ret;
+ }
+
+ /* Link drm_bridge to encoder */
+ ret = drm_bridge_attach(encoder, adv_bridge, NULL,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+ if (ret) {
+ drm_encoder_cleanup(encoder);
+ return ret;
+ }
+ drm_info(dev, "Bridge attached : SUCCESS");
+ connector = drm_bridge_connector_init(dev, encoder);
+ if (IS_ERR(connector)) {
+ DRM_ERROR("Unable to create bridge connector");
+ drm_encoder_cleanup(encoder);
+ return PTR_ERR(connector);
+ }
+ drm_connector_attach_encoder(connector, encoder);
+ return 0;
+}
+
+int kmb_dsi_map_mmio(struct kmb_dsi *kmb_dsi)
+{
+ struct resource *res;
+ struct device *dev = kmb_dsi->dev;
+
+ res = platform_get_resource_byname(kmb_dsi->pdev, IORESOURCE_MEM,
+ "mipi");
+ if (!res) {
+ dev_err(dev, "failed to get resource for mipi");
+ return -ENOMEM;
+ }
+ kmb_dsi->mipi_mmio = devm_ioremap_resource(dev, res);
+ if (IS_ERR(kmb_dsi->mipi_mmio)) {
+ dev_err(dev, "failed to ioremap mipi registers");
+ return PTR_ERR(kmb_dsi->mipi_mmio);
+ }
+ return 0;
+}
+
+static int kmb_dsi_clk_enable(struct kmb_dsi *kmb_dsi)
+{
+ int ret;
+ struct device *dev = kmb_dsi->dev;
+
+ ret = clk_prepare_enable(kmb_dsi->clk_mipi);
+ if (ret) {
+ dev_err(dev, "Failed to enable MIPI clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(kmb_dsi->clk_mipi_ecfg);
+ if (ret) {
+ dev_err(dev, "Failed to enable MIPI_ECFG clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(kmb_dsi->clk_mipi_cfg);
+ if (ret) {
+ dev_err(dev, "Failed to enable MIPI_CFG clock: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(dev, "SUCCESS : enabled MIPI clocks\n");
+ return 0;
+}
+
+int kmb_dsi_clk_init(struct kmb_dsi *kmb_dsi)
+{
+ struct device *dev = kmb_dsi->dev;
+ unsigned long clk;
+
+ kmb_dsi->clk_mipi = devm_clk_get(dev, "clk_mipi");
+ if (IS_ERR(kmb_dsi->clk_mipi)) {
+ dev_err(dev, "devm_clk_get() failed clk_mipi\n");
+ return PTR_ERR(kmb_dsi->clk_mipi);
+ }
+
+ kmb_dsi->clk_mipi_ecfg = devm_clk_get(dev, "clk_mipi_ecfg");
+ if (IS_ERR(kmb_dsi->clk_mipi_ecfg)) {
+ dev_err(dev, "devm_clk_get() failed clk_mipi_ecfg\n");
+ return PTR_ERR(kmb_dsi->clk_mipi_ecfg);
+ }
+
+ kmb_dsi->clk_mipi_cfg = devm_clk_get(dev, "clk_mipi_cfg");
+ if (IS_ERR(kmb_dsi->clk_mipi_cfg)) {
+ dev_err(dev, "devm_clk_get() failed clk_mipi_cfg\n");
+ return PTR_ERR(kmb_dsi->clk_mipi_cfg);
+ }
+ /* Set MIPI clock to 24 Mhz */
+ clk_set_rate(kmb_dsi->clk_mipi, KMB_MIPI_DEFAULT_CLK);
+ if (clk_get_rate(kmb_dsi->clk_mipi) != KMB_MIPI_DEFAULT_CLK) {
+ dev_err(dev, "failed to set to clk_mipi to %d\n",
+ KMB_MIPI_DEFAULT_CLK);
+ return -1;
+ }
+ dev_dbg(dev, "clk_mipi = %ld\n", clk_get_rate(kmb_dsi->clk_mipi));
+
+ clk = clk_get_rate(kmb_dsi->clk_mipi_ecfg);
+ if (clk != KMB_MIPI_DEFAULT_CFG_CLK) {
+ /* Set MIPI_ECFG clock to 24 Mhz */
+ clk_set_rate(kmb_dsi->clk_mipi_ecfg, KMB_MIPI_DEFAULT_CFG_CLK);
+ clk = clk_get_rate(kmb_dsi->clk_mipi_ecfg);
+ if (clk != KMB_MIPI_DEFAULT_CFG_CLK) {
+ dev_err(dev, "failed to set to clk_mipi_ecfg to %d\n",
+ KMB_MIPI_DEFAULT_CFG_CLK);
+ return -1;
+ }
+ }
+
+ clk = clk_get_rate(kmb_dsi->clk_mipi_cfg);
+ if (clk != KMB_MIPI_DEFAULT_CFG_CLK) {
+ /* Set MIPI_CFG clock to 24 Mhz */
+ clk_set_rate(kmb_dsi->clk_mipi_cfg, 24000000);
+ clk = clk_get_rate(kmb_dsi->clk_mipi_cfg);
+ if (clk != KMB_MIPI_DEFAULT_CFG_CLK) {
+ dev_err(dev, "failed to set clk_mipi_cfg to %d\n",
+ KMB_MIPI_DEFAULT_CFG_CLK);
+ return -1;
+ }
+ }
+
+ return kmb_dsi_clk_enable(kmb_dsi);
+}