summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/msm/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/msm/Kconfig')
-rw-r--r--drivers/gpu/drm/msm/Kconfig168
1 files changed, 168 insertions, 0 deletions
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
new file mode 100644
index 0000000000..6309a857ca
--- /dev/null
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config DRM_MSM
+ tristate "MSM DRM"
+ depends on DRM
+ depends on ARCH_QCOM || SOC_IMX5 || COMPILE_TEST
+ depends on COMMON_CLK
+ depends on IOMMU_SUPPORT
+ depends on QCOM_OCMEM || QCOM_OCMEM=n
+ depends on QCOM_LLCC || QCOM_LLCC=n
+ depends on QCOM_COMMAND_DB || QCOM_COMMAND_DB=n
+ depends on PM
+ select IOMMU_IO_PGTABLE
+ select QCOM_MDT_LOADER if ARCH_QCOM
+ select REGULATOR
+ select DRM_DP_AUX_BUS
+ select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_HELPER
+ select DRM_KMS_HELPER
+ select DRM_PANEL
+ select DRM_BRIDGE
+ select DRM_PANEL_BRIDGE
+ select DRM_SCHED
+ select FB_SYSMEM_HELPERS if DRM_FBDEV_EMULATION
+ select SHMEM
+ select TMPFS
+ select QCOM_SCM
+ select WANT_DEV_COREDUMP
+ select SND_SOC_HDMI_CODEC if SND_SOC
+ select SYNC_FILE
+ select PM_OPP
+ select NVMEM
+ select PM_GENERIC_DOMAINS
+ help
+ DRM/KMS driver for MSM/snapdragon.
+
+config DRM_MSM_GPU_STATE
+ bool
+ depends on DRM_MSM && (DEBUG_FS || DEV_COREDUMP)
+ default y
+
+config DRM_MSM_GPU_SUDO
+ bool "Enable SUDO flag on submits"
+ depends on DRM_MSM && EXPERT
+ default n
+ help
+ Enable userspace that has CAP_SYS_RAWIO to submit GPU commands
+ that are run from RB instead of IB1. This essentially gives
+ userspace kernel level access, but is useful for firmware
+ debugging.
+
+ Only use this if you are a driver developer. This should *not*
+ be enabled for production kernels. If unsure, say N.
+
+config DRM_MSM_MDSS
+ bool
+ depends on DRM_MSM
+ default n
+
+config DRM_MSM_MDP4
+ bool "Enable MDP4 support in MSM DRM driver"
+ depends on DRM_MSM
+ default y
+ help
+ Compile in support for the Mobile Display Processor v4 (MDP4) in
+ the MSM DRM driver. It is the older display controller found in
+ devices using APQ8064/MSM8960/MSM8x60 platforms.
+
+config DRM_MSM_MDP5
+ bool "Enable MDP5 support in MSM DRM driver"
+ depends on DRM_MSM
+ select DRM_MSM_MDSS
+ default y
+ help
+ Compile in support for the Mobile Display Processor v5 (MDP5) in
+ the MSM DRM driver. It is the display controller found in devices
+ using e.g. APQ8016/MSM8916/APQ8096/MSM8996/MSM8974/SDM6x0 platforms.
+
+config DRM_MSM_DPU
+ bool "Enable DPU support in MSM DRM driver"
+ depends on DRM_MSM
+ select DRM_MSM_MDSS
+ default y
+ help
+ Compile in support for the Display Processing Unit in
+ the MSM DRM driver. It is the display controller found in devices
+ using e.g. SDM845 and newer platforms.
+
+config DRM_MSM_DP
+ bool "Enable DisplayPort support in MSM DRM driver"
+ depends on DRM_MSM
+ select RATIONAL
+ default y
+ help
+ Compile in support for DP driver in MSM DRM driver. DP external
+ display support is enabled through this config option. It can
+ be primary or secondary display on device.
+
+config DRM_MSM_DSI
+ bool "Enable DSI support in MSM DRM driver"
+ depends on DRM_MSM
+ select DRM_PANEL
+ select DRM_MIPI_DSI
+ default y
+ help
+ Choose this option if you have a need for MIPI DSI connector
+ support.
+
+config DRM_MSM_DSI_28NM_PHY
+ bool "Enable DSI 28nm PHY driver in MSM DRM"
+ depends on DRM_MSM_DSI
+ default y
+ help
+ Choose this option if the 28nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_20NM_PHY
+ bool "Enable DSI 20nm PHY driver in MSM DRM"
+ depends on DRM_MSM_DSI
+ default y
+ help
+ Choose this option if the 20nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_28NM_8960_PHY
+ bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
+ depends on DRM_MSM_DSI
+ default y
+ help
+ Choose this option if the 28nm DSI PHY 8960 variant is used on the
+ platform.
+
+config DRM_MSM_DSI_14NM_PHY
+ bool "Enable DSI 14nm PHY driver in MSM DRM (used by MSM8996/APQ8096)"
+ depends on DRM_MSM_DSI
+ default y
+ help
+ Choose this option if DSI PHY on 8996 is used on the platform.
+
+config DRM_MSM_DSI_10NM_PHY
+ bool "Enable DSI 10nm PHY driver in MSM DRM (used by SDM845)"
+ depends on DRM_MSM_DSI
+ default y
+ help
+ Choose this option if DSI PHY on SDM845 is used on the platform.
+
+config DRM_MSM_DSI_7NM_PHY
+ bool "Enable DSI 7nm/5nm/4nm PHY driver in MSM DRM"
+ depends on DRM_MSM_DSI
+ default y
+ help
+ Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SM8550/SC7280
+ is used on the platform.
+
+config DRM_MSM_HDMI
+ bool "Enable HDMI support in MSM DRM driver"
+ depends on DRM_MSM
+ default y
+ help
+ Compile in support for the HDMI output MSM DRM driver. It can
+ be a primary or a secondary display on device. Note that this is used
+ only for the direct HDMI output. If the device outputs HDMI data
+ through some kind of DSI-to-HDMI bridge, this option can be disabled.
+
+config DRM_MSM_HDMI_HDCP
+ bool "Enable HDMI HDCP support in MSM DRM driver"
+ depends on DRM_MSM && DRM_MSM_HDMI
+ default y
+ help
+ Choose this option to enable HDCP state machine