summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/panel/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/panel/Kconfig')
-rw-r--r--drivers/gpu/drm/panel/Kconfig231
1 files changed, 131 insertions, 100 deletions
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 888297d0d3..5b15d02948 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -67,61 +67,25 @@ config DRM_PANEL_BOE_HIMAX8279D
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
-config DRM_PANEL_BOE_TV101WUM_NL6
- tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
+config DRM_PANEL_BOE_TH101MB31UIG002_28A
+ tristate "Boe TH101MB31UIG002-28A panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
- Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
- 45NA WUXGA PANEL DSI Video Mode panel
+ Say Y here if you want to enable support for Boe
+ TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
+ resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
+ interface to the host and has a built-in LED backlight.
-config DRM_PANEL_DSI_CM
- tristate "Generic DSI command mode panels"
+config DRM_PANEL_BOE_TV101WUM_NL6
+ tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
- DRM panel driver for DSI command mode panels with support for
- embedded and external backlights.
-
-config DRM_PANEL_LVDS
- tristate "Generic LVDS panel driver"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- select VIDEOMODE_HELPERS
- help
- This driver supports LVDS panels that don't require device-specific
- handling of power supplies or control signals. It implements automatic
- backlight handling if the panel is attached to a backlight controller.
-
-config DRM_PANEL_SIMPLE
- tristate "support for simple panels (other than eDP ones)"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- depends on PM
- select VIDEOMODE_HELPERS
- help
- DRM panel driver for dumb non-eDP panels that need at most a regulator
- and a GPIO to be powered up. Optionally a backlight can be attached so
- that it can be automatically turned off when the panel goes into a
- low power state.
-
-config DRM_PANEL_EDP
- tristate "support for simple Embedded DisplayPort panels"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- depends on PM
- select VIDEOMODE_HELPERS
- select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_HELPER
- select DRM_DP_AUX_BUS
- select DRM_KMS_HELPER
- help
- DRM panel driver for dumb eDP panels that need at most a regulator and
- a GPIO to be powered up. Optionally a backlight can be attached so
- that it can be automatically turned off when the panel goes into a
- low power state.
+ Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
+ 45NA WUXGA PANEL DSI Video Mode panel
config DRM_PANEL_EBBG_FT8719
tristate "EBBG FT8719 panel driver"
@@ -162,6 +126,35 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D
Say Y if you want to enable support for panels based on the
Feiyang FY07024DI26A30-D MIPI-DSI interface.
+config DRM_PANEL_DSI_CM
+ tristate "Generic DSI command mode panels"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ DRM panel driver for DSI command mode panels with support for
+ embedded and external backlights.
+
+config DRM_PANEL_LVDS
+ tristate "Generic LVDS panel driver"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+ help
+ This driver supports LVDS panels that don't require device-specific
+ handling of power supplies or control signals. It implements automatic
+ backlight handling if the panel is attached to a backlight controller.
+
+config DRM_PANEL_HIMAX_HX83112A
+ tristate "Himax HX83112A-based DSI panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select DRM_KMS_HELPER
+ help
+ Say Y here if you want to enable support for Himax HX83112A-based
+ display panels, such as the one found in the Fairphone 4 smartphone.
+
config DRM_PANEL_HIMAX_HX8394
tristate "HIMAX HX8394 MIPI-DSI LCD panels"
depends on OF
@@ -251,17 +244,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3
WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
800RGBx1280 dots at maximum.
-config DRM_PANEL_JDI_LT070ME05000
- tristate "JDI LT070ME05000 WUXGA DSI panel"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y here if you want to enable support for JDI DSI video mode
- panel as found in Google Nexus 7 (2013) devices.
- The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
- 24 bit per pixel.
-
config DRM_PANEL_JDI_LPM102A188A
tristate "JDI LPM102A188A DSI panel"
depends on OF && GPIOLIB
@@ -273,6 +255,17 @@ config DRM_PANEL_JDI_LPM102A188A
The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
to the host.
+config DRM_PANEL_JDI_LT070ME05000
+ tristate "JDI LT070ME05000 WUXGA DSI panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for JDI DSI video mode
+ panel as found in Google Nexus 7 (2013) devices.
+ The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
+ 24 bit per pixel.
+
config DRM_PANEL_JDI_R63452
tristate "JDI R63452 Full HD DSI panel"
depends on OF
@@ -326,12 +319,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
-config DRM_PANEL_SAMSUNG_LD9040
- tristate "Samsung LD9040 RGB/SPI panel"
- depends on OF && SPI
- depends on BACKLIGHT_CLASS_DEVICE
- select VIDEOMODE_HELPERS
-
config DRM_PANEL_LG_LB035Q02
tristate "LG LB035Q024573 RGB panel"
depends on GPIOLIB && OF && SPI
@@ -359,6 +346,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
with the Magnachip D53E6EA8966 panel IC. This panel receives
video data via DSI but commands via 9-bit SPI using DBI.
+config DRM_PANEL_MANTIX_MLAF057WE51
+ tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the Mantix
+ MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+ has a resolution of 720x1440 pixels, a built in backlight and touch
+ controller.
+
config DRM_PANEL_NEC_NL8048HL11
tristate "NEC NL8048HL11 RGB panel"
depends on GPIOLIB && OF && SPI
@@ -438,6 +436,16 @@ config DRM_PANEL_NOVATEK_NT36672A
around the Novatek NT36672A display controller, such as some
Tianma panels used in a few Xiaomi Poco F1 mobile phones.
+config DRM_PANEL_NOVATEK_NT36672E
+ tristate "Novatek NT36672E DSI panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
+ LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
+ RGB per pixel.
+
config DRM_PANEL_NOVATEK_NT39016
tristate "Novatek NT39016 RGB/SPI panel"
depends on OF && SPI
@@ -447,17 +455,6 @@ config DRM_PANEL_NOVATEK_NT39016
Say Y here if you want to enable support for the panels built
around the Novatek NT39016 display controller.
-config DRM_PANEL_MANTIX_MLAF057WE51
- tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y here if you want to enable support for the Mantix
- MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
- has a resolution of 720x1440 pixels, a built in backlight and touch
- controller.
-
config DRM_PANEL_OLIMEX_LCD_OLINUXINO
tristate "Olimex LCD-OLinuXino panel"
depends on OF
@@ -554,6 +551,12 @@ config DRM_PANEL_RONBO_RB070D30
Say Y here if you want to enable support for Ronbo Electronics
RB070D30 1024x600 DSI panel.
+config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
+ tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
+ depends on OF
+ select DRM_MIPI_DSI
+ select VIDEOMODE_HELPERS
+
config DRM_PANEL_SAMSUNG_ATNA33XC20
tristate "Samsung ATNA33XC20 eDP panel"
depends on OF
@@ -577,6 +580,12 @@ config DRM_PANEL_SAMSUNG_DB7430
DB7430 DPI display controller used in such devices as the
LMS397KF04 480x800 DPI panel.
+config DRM_PANEL_SAMSUNG_LD9040
+ tristate "Samsung LD9040 RGB/SPI panel"
+ depends on OF && SPI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+
config DRM_PANEL_SAMSUNG_S6D16D0
tristate "Samsung S6D16D0 DSI video mode panel"
depends on OF
@@ -642,12 +651,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI
Say Y here if you want to be able to access the Samsung
S6E63M0 panel using DSI.
-config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
- tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
- depends on OF
- select DRM_MIPI_DSI
- select VIDEOMODE_HELPERS
-
config DRM_PANEL_SAMSUNG_S6E8AA0
tristate "Samsung S6E8AA0 DSI video mode panel"
depends on OF
@@ -746,15 +749,6 @@ config DRM_PANEL_SITRONIX_ST7789V
Say Y here if you want to enable support for the Sitronix
ST7789V controller for 240x320 LCD panels
-config DRM_PANEL_SYNAPTICS_R63353
- tristate "Synaptics R63353-based panels"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y if you want to enable support for panels based on the
- Synaptics R63353 controller.
-
config DRM_PANEL_SONY_ACX565AKM
tristate "Sony ACX565AKM panel"
depends on GPIOLIB && OF && SPI
@@ -794,6 +788,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015
with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
the host, a built-in LED backlight and touch controller.
+config DRM_PANEL_EDP
+ tristate "support for simple Embedded DisplayPort panels"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on PM
+ select VIDEOMODE_HELPERS
+ select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_HELPER
+ select DRM_DP_AUX_BUS
+ select DRM_KMS_HELPER
+ help
+ DRM panel driver for dumb eDP panels that need at most a regulator and
+ a GPIO to be powered up. Optionally a backlight can be attached so
+ that it can be automatically turned off when the panel goes into a
+ low power state.
+
+config DRM_PANEL_SIMPLE
+ tristate "support for simple panels (other than eDP ones)"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on PM
+ select VIDEOMODE_HELPERS
+ help
+ DRM panel driver for dumb non-eDP panels that need at most a regulator
+ and a GPIO to be powered up. Optionally a backlight can be attached so
+ that it can be automatically turned off when the panel goes into a
+ low power state.
+
+config DRM_PANEL_SYNAPTICS_R63353
+ tristate "Synaptics R63353-based panels"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y if you want to enable support for panels based on the
+ Synaptics R63353 controller.
+
config DRM_PANEL_TDO_TL070WSH30
tristate "TDO TL070WSH30 DSI panel"
depends on OF
@@ -837,6 +868,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
Video Mode panel
+config DRM_PANEL_VISIONOX_R66451
+ tristate "Visionox R66451"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_HELPER
+ help
+ Say Y here if you want to enable support for Visionox
+ R66451 1080x2340 AMOLED DSI panel.
+
config DRM_PANEL_VISIONOX_RM69299
tristate "Visionox RM69299"
depends on OF
@@ -854,17 +896,6 @@ config DRM_PANEL_VISIONOX_VTDR6130
Say Y here if you want to enable support for Visionox
VTDR6130 1080x2400 AMOLED DSI panel.
-config DRM_PANEL_VISIONOX_R66451
- tristate "Visionox R66451"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_HELPER
- help
- Say Y here if you want to enable support for Visionox
- R66451 1080x2340 AMOLED DSI panel.
-
config DRM_PANEL_WIDECHIPS_WS2401
tristate "Widechips WS2401 DPI panel driver"
depends on SPI && GPIOLIB