diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-auo-a030jtn01.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-auo-a030jtn01.c | 308 |
1 files changed, 308 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-auo-a030jtn01.c b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c new file mode 100644 index 0000000000..6c86ebf2ca --- /dev/null +++ b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AU Optronics A030JTN01.0 TFT LCD panel driver + * + * Copyright (C) 2023, Paul Cercueil <paul@crapouillou.net> + * Copyright (C) 2023, Christophe Branchereau <cbranchereau@gmail.com> + */ + +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#define REG05 0x05 +#define REG06 0x06 +#define REG07 0x07 + +#define REG05_STDBY BIT(0) +#define REG06_VBLK GENMASK(4, 0) +#define REG07_HBLK GENMASK(7, 0) + + +struct a030jtn01_info { + const struct drm_display_mode *display_modes; + unsigned int num_modes; + u16 width_mm, height_mm; + u32 bus_format, bus_flags; +}; + +struct a030jtn01 { + struct drm_panel panel; + struct spi_device *spi; + struct regmap *map; + + const struct a030jtn01_info *panel_info; + + struct regulator *supply; + struct gpio_desc *reset_gpio; +}; + +static inline struct a030jtn01 *to_a030jtn01(struct drm_panel *panel) +{ + return container_of(panel, struct a030jtn01, panel); +} + +static int a030jtn01_prepare(struct drm_panel *panel) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + struct device *dev = &priv->spi->dev; + unsigned int dummy; + int err; + + err = regulator_enable(priv->supply); + if (err) { + dev_err(dev, "Failed to enable power supply: %d\n", err); + return err; + } + + usleep_range(1000, 8000); + + /* Reset the chip */ + gpiod_set_value_cansleep(priv->reset_gpio, 1); + usleep_range(100, 8000); + gpiod_set_value_cansleep(priv->reset_gpio, 0); + usleep_range(2000, 8000); + + /* + * No idea why, but a register read (doesn't matter which) is needed to + * properly initialize the chip after a reset; otherwise, the colors + * will be wrong. It doesn't seem to be timing-related as a msleep(200) + * doesn't fix it. + */ + err = regmap_read(priv->map, REG05, &dummy); + if (err) + goto err_disable_regulator; + + /* Use (24 + 6) == 0x1e as the vertical back porch */ + err = regmap_write(priv->map, REG06, FIELD_PREP(REG06_VBLK, 0x1e)); + if (err) + goto err_disable_regulator; + + /* Use (42 + 30) * 3 == 0xd8 as the horizontal back porch */ + err = regmap_write(priv->map, REG07, FIELD_PREP(REG07_HBLK, 0xd8)); + if (err) + goto err_disable_regulator; + + return 0; + +err_disable_regulator: + gpiod_set_value_cansleep(priv->reset_gpio, 1); + regulator_disable(priv->supply); + return err; +} + +static int a030jtn01_unprepare(struct drm_panel *panel) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + + gpiod_set_value_cansleep(priv->reset_gpio, 1); + regulator_disable(priv->supply); + + return 0; +} + +static int a030jtn01_enable(struct drm_panel *panel) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + int ret; + + ret = regmap_set_bits(priv->map, REG05, REG05_STDBY); + if (ret) + return ret; + + /* Wait for the picture to be stable */ + if (panel->backlight) + msleep(100); + + return 0; +} + +static int a030jtn01_disable(struct drm_panel *panel) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + + return regmap_clear_bits(priv->map, REG05, REG05_STDBY); +} + +static int a030jtn01_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + const struct a030jtn01_info *panel_info = priv->panel_info; + struct drm_display_mode *mode; + unsigned int i; + + for (i = 0; i < panel_info->num_modes; i++) { + mode = drm_mode_duplicate(connector->dev, + &panel_info->display_modes[i]); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER; + if (panel_info->num_modes == 1) + mode->type |= DRM_MODE_TYPE_PREFERRED; + + drm_mode_probed_add(connector, mode); + } + + connector->display_info.bpc = 8; + connector->display_info.width_mm = panel_info->width_mm; + connector->display_info.height_mm = panel_info->height_mm; + + drm_display_info_set_bus_formats(&connector->display_info, + &panel_info->bus_format, 1); + connector->display_info.bus_flags = panel_info->bus_flags; + + return panel_info->num_modes; +} + +static const struct drm_panel_funcs a030jtn01_funcs = { + .prepare = a030jtn01_prepare, + .unprepare = a030jtn01_unprepare, + .enable = a030jtn01_enable, + .disable = a030jtn01_disable, + .get_modes = a030jtn01_get_modes, +}; + +static bool a030jtn01_has_reg(struct device *dev, unsigned int reg) +{ + static const u32 a030jtn01_regs_mask = 0x001823f1fb; + + return a030jtn01_regs_mask & BIT(reg); +}; + +static const struct regmap_config a030jtn01_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .read_flag_mask = 0x40, + .max_register = 0x1c, + .readable_reg = a030jtn01_has_reg, + .writeable_reg = a030jtn01_has_reg, +}; + +static int a030jtn01_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct a030jtn01 *priv; + int err; + + spi->mode |= SPI_MODE_3 | SPI_3WIRE; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->spi = spi; + spi_set_drvdata(spi, priv); + + priv->map = devm_regmap_init_spi(spi, &a030jtn01_regmap_config); + if (IS_ERR(priv->map)) + return dev_err_probe(dev, PTR_ERR(priv->map), "Unable to init regmap"); + + priv->panel_info = spi_get_device_match_data(spi); + if (!priv->panel_info) + return -EINVAL; + + priv->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(priv->supply)) + return dev_err_probe(dev, PTR_ERR(priv->supply), "Failed to get power supply"); + + priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO"); + + drm_panel_init(&priv->panel, dev, &a030jtn01_funcs, + DRM_MODE_CONNECTOR_DPI); + + err = drm_panel_of_backlight(&priv->panel); + if (err) + return err; + + drm_panel_add(&priv->panel); + + return 0; +} + +static void a030jtn01_remove(struct spi_device *spi) +{ + struct a030jtn01 *priv = spi_get_drvdata(spi); + + drm_panel_remove(&priv->panel); + drm_panel_disable(&priv->panel); + drm_panel_unprepare(&priv->panel); +} + +static const struct drm_display_mode a030jtn01_modes[] = { + { /* 60 Hz */ + .clock = 14400, + .hdisplay = 320, + .hsync_start = 320 + 8, + .hsync_end = 320 + 8 + 42, + .htotal = 320 + 8 + 42 + 30, + .vdisplay = 480, + .vsync_start = 480 + 90, + .vsync_end = 480 + 90 + 24, + .vtotal = 480 + 90 + 24 + 6, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + }, + { /* 50 Hz */ + .clock = 12000, + .hdisplay = 320, + .hsync_start = 320 + 8, + .hsync_end = 320 + 8 + 42, + .htotal = 320 + 8 + 42 + 30, + .vdisplay = 480, + .vsync_start = 480 + 90, + .vsync_end = 480 + 90 + 24, + .vtotal = 480 + 90 + 24 + 6, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + }, +}; + +static const struct a030jtn01_info a030jtn01_info = { + .display_modes = a030jtn01_modes, + .num_modes = ARRAY_SIZE(a030jtn01_modes), + .width_mm = 70, + .height_mm = 51, + .bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA, + .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, +}; + +static const struct spi_device_id a030jtn01_id[] = { + { "a030jtn01", (kernel_ulong_t) &a030jtn01_info }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(spi, a030jtn01_id); + +static const struct of_device_id a030jtn01_of_match[] = { + { .compatible = "auo,a030jtn01" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, a030jtn01_of_match); + +static struct spi_driver a030jtn01_driver = { + .driver = { + .name = "auo-a030jtn01", + .of_match_table = a030jtn01_of_match, + }, + .id_table = a030jtn01_id, + .probe = a030jtn01_probe, + .remove = a030jtn01_remove, +}; +module_spi_driver(a030jtn01_driver); + +MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); +MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>"); +MODULE_LICENSE("GPL"); |