diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-ronbo-rb070d30.c')
-rw-r--r-- | drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c new file mode 100644 index 0000000000..2ef5ea5eae --- /dev/null +++ b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018-2019, Bridge Systems BV + * Copyright (C) 2018-2019, Bootlin + * Copyright (C) 2017, Free Electrons + * + * This file based on panel-ilitek-ili9881c.c + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> + +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_connector.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +struct rb070d30_panel { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + struct regulator *supply; + + struct { + struct gpio_desc *power; + struct gpio_desc *reset; + struct gpio_desc *updn; + struct gpio_desc *shlr; + } gpios; +}; + +static inline struct rb070d30_panel *panel_to_rb070d30_panel(struct drm_panel *panel) +{ + return container_of(panel, struct rb070d30_panel, panel); +} + +static int rb070d30_panel_prepare(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + int ret; + + ret = regulator_enable(ctx->supply); + if (ret < 0) { + dev_err(&ctx->dsi->dev, "Failed to enable supply: %d\n", ret); + return ret; + } + + msleep(20); + gpiod_set_value(ctx->gpios.power, 1); + msleep(20); + gpiod_set_value(ctx->gpios.reset, 1); + msleep(20); + return 0; +} + +static int rb070d30_panel_unprepare(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + + gpiod_set_value(ctx->gpios.reset, 0); + gpiod_set_value(ctx->gpios.power, 0); + regulator_disable(ctx->supply); + + return 0; +} + +static int rb070d30_panel_enable(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + + return mipi_dsi_dcs_exit_sleep_mode(ctx->dsi); +} + +static int rb070d30_panel_disable(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + + return mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); +} + +/* Default timings */ +static const struct drm_display_mode default_mode = { + .clock = 51206, + .hdisplay = 1024, + .hsync_start = 1024 + 160, + .hsync_end = 1024 + 160 + 80, + .htotal = 1024 + 160 + 80 + 80, + .vdisplay = 600, + .vsync_start = 600 + 12, + .vsync_end = 600 + 12 + 10, + .vtotal = 600 + 12 + 10 + 13, + + .width_mm = 154, + .height_mm = 85, +}; + +static int rb070d30_panel_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + struct drm_display_mode *mode; + static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; + + mode = drm_mode_duplicate(connector->dev, &default_mode); + if (!mode) { + dev_err(&ctx->dsi->dev, "Failed to add mode " DRM_MODE_FMT "\n", + DRM_MODE_ARG(&default_mode)); + return -EINVAL; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + connector->display_info.bpc = 8; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_display_info_set_bus_formats(&connector->display_info, + &bus_format, 1); + + return 1; +} + +static const struct drm_panel_funcs rb070d30_panel_funcs = { + .get_modes = rb070d30_panel_get_modes, + .prepare = rb070d30_panel_prepare, + .enable = rb070d30_panel_enable, + .disable = rb070d30_panel_disable, + .unprepare = rb070d30_panel_unprepare, +}; + +static int rb070d30_panel_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct rb070d30_panel *ctx; + int ret; + + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->supply = devm_regulator_get(&dsi->dev, "vcc-lcd"); + if (IS_ERR(ctx->supply)) + return PTR_ERR(ctx->supply); + + mipi_dsi_set_drvdata(dsi, ctx); + ctx->dsi = dsi; + + drm_panel_init(&ctx->panel, &dsi->dev, &rb070d30_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + + ctx->gpios.reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.reset)) { + dev_err(&dsi->dev, "Couldn't get our reset GPIO\n"); + return PTR_ERR(ctx->gpios.reset); + } + + ctx->gpios.power = devm_gpiod_get(&dsi->dev, "power", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.power)) { + dev_err(&dsi->dev, "Couldn't get our power GPIO\n"); + return PTR_ERR(ctx->gpios.power); + } + + /* + * We don't change the state of that GPIO later on but we need + * to force it into a low state. + */ + ctx->gpios.updn = devm_gpiod_get(&dsi->dev, "updn", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.updn)) { + dev_err(&dsi->dev, "Couldn't get our updn GPIO\n"); + return PTR_ERR(ctx->gpios.updn); + } + + /* + * We don't change the state of that GPIO later on but we need + * to force it into a low state. + */ + ctx->gpios.shlr = devm_gpiod_get(&dsi->dev, "shlr", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.shlr)) { + dev_err(&dsi->dev, "Couldn't get our shlr GPIO\n"); + return PTR_ERR(ctx->gpios.shlr); + } + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->lanes = 4; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static void rb070d30_panel_dsi_remove(struct mipi_dsi_device *dsi) +{ + struct rb070d30_panel *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); +} + +static const struct of_device_id rb070d30_panel_of_match[] = { + { .compatible = "ronbo,rb070d30" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rb070d30_panel_of_match); + +static struct mipi_dsi_driver rb070d30_panel_driver = { + .probe = rb070d30_panel_dsi_probe, + .remove = rb070d30_panel_dsi_remove, + .driver = { + .name = "panel-ronbo-rb070d30", + .of_match_table = rb070d30_panel_of_match, + }, +}; +module_mipi_dsi_driver(rb070d30_panel_driver); + +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>"); +MODULE_AUTHOR("Konstantin Sudakov <k.sudakov@integrasources.com>"); +MODULE_DESCRIPTION("Ronbo RB070D30 Panel Driver"); +MODULE_LICENSE("GPL"); |