diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-samsung-db7430.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-samsung-db7430.c | 349 |
1 files changed, 349 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-samsung-db7430.c b/drivers/gpu/drm/panel/panel-samsung-db7430.c new file mode 100644 index 0000000000..14c6700e37 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-samsung-db7430.c @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Panel driver for the Samsung LMS397KF04 480x800 DPI RGB panel. + * According to the data sheet the display controller is called DB7430. + * Found in the Samsung Galaxy Beam GT-I8350 mobile phone. + * Linus Walleij <linus.walleij@linaro.org> + */ +#include <drm/drm_mipi_dbi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <video/mipi_display.h> + +#define DB7430_ACCESS_PROT_OFF 0xb0 +#define DB7430_UNKNOWN_B4 0xb4 +#define DB7430_USER_SELECT 0xb5 +#define DB7430_UNKNOWN_B7 0xb7 +#define DB7430_UNKNOWN_B8 0xb8 +#define DB7430_PANEL_DRIVING 0xc0 +#define DB7430_SOURCE_CONTROL 0xc1 +#define DB7430_GATE_INTERFACE 0xc4 +#define DB7430_DISPLAY_H_TIMING 0xc5 +#define DB7430_RGB_SYNC_OPTION 0xc6 +#define DB7430_GAMMA_SET_RED 0xc8 +#define DB7430_GAMMA_SET_GREEN 0xc9 +#define DB7430_GAMMA_SET_BLUE 0xca +#define DB7430_BIAS_CURRENT_CTRL 0xd1 +#define DB7430_DDV_CTRL 0xd2 +#define DB7430_GAMMA_CTRL_REF 0xd3 +#define DB7430_UNKNOWN_D4 0xd4 +#define DB7430_DCDC_CTRL 0xd5 +#define DB7430_VCL_CTRL 0xd6 +#define DB7430_UNKNOWN_F8 0xf8 +#define DB7430_UNKNOWN_FC 0xfc + +#define DATA_MASK 0x100 + +/** + * struct db7430 - state container for a panel controlled by the DB7430 + * controller + */ +struct db7430 { + /** @dev: the container device */ + struct device *dev; + /** @dbi: the DBI bus abstraction handle */ + struct mipi_dbi dbi; + /** @panel: the DRM panel instance for this device */ + struct drm_panel panel; + /** @reset: reset GPIO line */ + struct gpio_desc *reset; + /** @regulators: VCCIO and VIO supply regulators */ + struct regulator_bulk_data regulators[2]; +}; + +static const struct drm_display_mode db7430_480_800_mode = { + /* + * 31 ns period min (htotal*vtotal*vrefresh)/1000 + * gives a Vrefresh of ~71 Hz. + */ + .clock = 32258, + .hdisplay = 480, + .hsync_start = 480 + 10, + .hsync_end = 480 + 10 + 4, + .htotal = 480 + 10 + 4 + 40, + .vdisplay = 800, + .vsync_start = 800 + 6, + .vsync_end = 800 + 6 + 1, + .vtotal = 800 + 6 + 1 + 7, + .width_mm = 53, + .height_mm = 87, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, +}; + +static inline struct db7430 *to_db7430(struct drm_panel *panel) +{ + return container_of(panel, struct db7430, panel); +} + +static int db7430_power_on(struct db7430 *db) +{ + struct mipi_dbi *dbi = &db->dbi; + int ret; + + /* Power up */ + ret = regulator_bulk_enable(ARRAY_SIZE(db->regulators), + db->regulators); + if (ret) { + dev_err(db->dev, "failed to enable regulators: %d\n", ret); + return ret; + } + msleep(50); + + /* Assert reset >=1 ms */ + gpiod_set_value_cansleep(db->reset, 1); + usleep_range(1000, 5000); + /* De-assert reset */ + gpiod_set_value_cansleep(db->reset, 0); + /* Wait >= 10 ms */ + msleep(10); + dev_dbg(db->dev, "de-asserted RESET\n"); + + /* + * This is set to 0x0a (RGB/BGR order + horizontal flip) in order + * to make the display behave normally. If this is not set the displays + * normal output behaviour is horizontally flipped and BGR ordered. Do + * it twice because the first message doesn't always "take". + */ + mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, 0x0a); + mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, 0x0a); + mipi_dbi_command(dbi, DB7430_ACCESS_PROT_OFF, 0x00); + mipi_dbi_command(dbi, DB7430_PANEL_DRIVING, 0x28, 0x08); + mipi_dbi_command(dbi, DB7430_SOURCE_CONTROL, + 0x01, 0x30, 0x15, 0x05, 0x22); + mipi_dbi_command(dbi, DB7430_GATE_INTERFACE, + 0x10, 0x01, 0x00); + mipi_dbi_command(dbi, DB7430_DISPLAY_H_TIMING, + 0x06, 0x55, 0x03, 0x07, 0x0b, + 0x33, 0x00, 0x01, 0x03); + /* + * 0x00 in datasheet 0x01 in vendor code 0x00, it seems 0x01 means + * DE active high and 0x00 means DE active low. + */ + mipi_dbi_command(dbi, DB7430_RGB_SYNC_OPTION, 0x01); + mipi_dbi_command(dbi, DB7430_GAMMA_SET_RED, + /* R positive gamma */ 0x00, + 0x0A, 0x31, 0x3B, 0x4E, 0x58, 0x59, 0x5B, 0x58, 0x5E, 0x62, + 0x60, 0x61, 0x5E, 0x62, 0x55, 0x55, 0x7F, 0x08, + /* R negative gamma */ 0x00, + 0x0A, 0x31, 0x3B, 0x4E, 0x58, 0x59, 0x5B, 0x58, 0x5E, 0x62, + 0x60, 0x61, 0x5E, 0x62, 0x55, 0x55, 0x7F, 0x08); + mipi_dbi_command(dbi, DB7430_GAMMA_SET_GREEN, + /* G positive gamma */ 0x00, + 0x25, 0x15, 0x28, 0x3D, 0x4A, 0x48, 0x4C, 0x4A, 0x52, 0x59, + 0x59, 0x5B, 0x56, 0x60, 0x5D, 0x55, 0x7F, 0x0A, + /* G negative gamma */ 0x00, + 0x25, 0x15, 0x28, 0x3D, 0x4A, 0x48, 0x4C, 0x4A, 0x52, 0x59, + 0x59, 0x5B, 0x56, 0x60, 0x5D, 0x55, 0x7F, 0x0A); + mipi_dbi_command(dbi, DB7430_GAMMA_SET_BLUE, + /* B positive gamma */ 0x00, + 0x48, 0x10, 0x1F, 0x2F, 0x35, 0x38, 0x3D, 0x3C, 0x45, 0x4D, + 0x4E, 0x52, 0x51, 0x60, 0x7F, 0x7E, 0x7F, 0x0C, + /* B negative gamma */ 0x00, + 0x48, 0x10, 0x1F, 0x2F, 0x35, 0x38, 0x3D, 0x3C, 0x45, 0x4D, + 0x4E, 0x52, 0x51, 0x60, 0x7F, 0x7E, 0x7F, 0x0C); + mipi_dbi_command(dbi, DB7430_BIAS_CURRENT_CTRL, 0x33, 0x13); + mipi_dbi_command(dbi, DB7430_DDV_CTRL, 0x11, 0x00, 0x00); + mipi_dbi_command(dbi, DB7430_GAMMA_CTRL_REF, 0x50, 0x50); + mipi_dbi_command(dbi, DB7430_DCDC_CTRL, 0x2f, 0x11, 0x1e, 0x46); + mipi_dbi_command(dbi, DB7430_VCL_CTRL, 0x11, 0x0a); + + return 0; +} + +static int db7430_power_off(struct db7430 *db) +{ + /* Go into RESET and disable regulators */ + gpiod_set_value_cansleep(db->reset, 1); + return regulator_bulk_disable(ARRAY_SIZE(db->regulators), + db->regulators); +} + +static int db7430_unprepare(struct drm_panel *panel) +{ + return db7430_power_off(to_db7430(panel)); +} + +static int db7430_disable(struct drm_panel *panel) +{ + struct db7430 *db = to_db7430(panel); + struct mipi_dbi *dbi = &db->dbi; + + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); + msleep(25); + mipi_dbi_command(dbi, MIPI_DCS_ENTER_SLEEP_MODE); + msleep(120); + + return 0; +} + +static int db7430_prepare(struct drm_panel *panel) +{ + return db7430_power_on(to_db7430(panel)); +} + +static int db7430_enable(struct drm_panel *panel) +{ + struct db7430 *db = to_db7430(panel); + struct mipi_dbi *dbi = &db->dbi; + + /* Exit sleep mode */ + mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(20); + + /* NVM (non-volatile memory) load sequence */ + mipi_dbi_command(dbi, DB7430_UNKNOWN_D4, 0x52, 0x5e); + mipi_dbi_command(dbi, DB7430_UNKNOWN_F8, 0x01, 0xf5, 0xf2, 0x71, 0x44); + mipi_dbi_command(dbi, DB7430_UNKNOWN_FC, 0x00, 0x08); + msleep(150); + + /* CABC turn on sequence (BC = backlight control) */ + mipi_dbi_command(dbi, DB7430_UNKNOWN_B4, 0x0f, 0x00, 0x50); + mipi_dbi_command(dbi, DB7430_USER_SELECT, 0x80); + mipi_dbi_command(dbi, DB7430_UNKNOWN_B7, 0x24); + mipi_dbi_command(dbi, DB7430_UNKNOWN_B8, 0x01); + + /* Turn on display */ + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); + + return 0; +} + +/** + * db7430_get_modes() - return the mode + * @panel: the panel to get the mode for + * @connector: reference to the central DRM connector control structure + */ +static int db7430_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct db7430 *db = to_db7430(panel); + struct drm_display_mode *mode; + static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; + + mode = drm_mode_duplicate(connector->dev, &db7430_480_800_mode); + if (!mode) { + dev_err(db->dev, "failed to add mode\n"); + return -ENOMEM; + } + + connector->display_info.bpc = 8; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + connector->display_info.bus_flags = + DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE; + drm_display_info_set_bus_formats(&connector->display_info, + &bus_format, 1); + + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs db7430_drm_funcs = { + .disable = db7430_disable, + .unprepare = db7430_unprepare, + .prepare = db7430_prepare, + .enable = db7430_enable, + .get_modes = db7430_get_modes, +}; + +static int db7430_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct db7430 *db; + int ret; + + db = devm_kzalloc(dev, sizeof(*db), GFP_KERNEL); + if (!db) + return -ENOMEM; + db->dev = dev; + + /* + * VCI is the analog voltage supply + * VCCIO is the digital I/O voltage supply + */ + db->regulators[0].supply = "vci"; + db->regulators[1].supply = "vccio"; + ret = devm_regulator_bulk_get(dev, + ARRAY_SIZE(db->regulators), + db->regulators); + if (ret) + return dev_err_probe(dev, ret, "failed to get regulators\n"); + + db->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(db->reset)) { + ret = PTR_ERR(db->reset); + return dev_err_probe(dev, ret, "no RESET GPIO\n"); + } + + ret = mipi_dbi_spi_init(spi, &db->dbi, NULL); + if (ret) + return dev_err_probe(dev, ret, "MIPI DBI init failed\n"); + + drm_panel_init(&db->panel, dev, &db7430_drm_funcs, + DRM_MODE_CONNECTOR_DPI); + + /* FIXME: if no external backlight, use internal backlight */ + ret = drm_panel_of_backlight(&db->panel); + if (ret) + return dev_err_probe(dev, ret, "failed to add backlight\n"); + + spi_set_drvdata(spi, db); + + drm_panel_add(&db->panel); + dev_dbg(dev, "added panel\n"); + + return 0; +} + +static void db7430_remove(struct spi_device *spi) +{ + struct db7430 *db = spi_get_drvdata(spi); + + drm_panel_remove(&db->panel); +} + +/* + * The DB7430 display controller may be used in several display products, + * so list the different variants here and add per-variant data if needed. + */ +static const struct of_device_id db7430_match[] = { + { .compatible = "samsung,lms397kf04", }, + {}, +}; +MODULE_DEVICE_TABLE(of, db7430_match); + +static const struct spi_device_id db7430_ids[] = { + { "lms397kf04" }, + { }, +}; +MODULE_DEVICE_TABLE(spi, db7430_ids); + +static struct spi_driver db7430_driver = { + .probe = db7430_probe, + .remove = db7430_remove, + .id_table = db7430_ids, + .driver = { + .name = "db7430-panel", + .of_match_table = db7430_match, + }, +}; +module_spi_driver(db7430_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("Samsung DB7430 panel driver"); +MODULE_LICENSE("GPL v2"); |