diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-tpo-td028ttec1.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-tpo-td028ttec1.c | 392 |
1 files changed, 392 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c new file mode 100644 index 0000000000..4dbf8b88f2 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c @@ -0,0 +1,392 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Toppoly TD028TTEC1 Panel Driver + * + * Copyright (C) 2019 Texas Instruments Incorporated + * + * Based on the omapdrm-specific panel-tpo-td028ttec1 driver + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * + * Neo 1973 code (jbt6k74.c): + * Copyright (C) 2006-2007 OpenMoko, Inc. + * Author: Harald Welte <laforge@openmoko.org> + * + * Ported and adapted from Neo 1973 U-Boot by: + * H. Nikolaus Schaller <hns@goldelico.com> + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/spi/spi.h> + +#include <drm/drm_connector.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#define JBT_COMMAND 0x000 +#define JBT_DATA 0x100 + +#define JBT_REG_SLEEP_IN 0x10 +#define JBT_REG_SLEEP_OUT 0x11 + +#define JBT_REG_DISPLAY_OFF 0x28 +#define JBT_REG_DISPLAY_ON 0x29 + +#define JBT_REG_RGB_FORMAT 0x3a +#define JBT_REG_QUAD_RATE 0x3b + +#define JBT_REG_POWER_ON_OFF 0xb0 +#define JBT_REG_BOOSTER_OP 0xb1 +#define JBT_REG_BOOSTER_MODE 0xb2 +#define JBT_REG_BOOSTER_FREQ 0xb3 +#define JBT_REG_OPAMP_SYSCLK 0xb4 +#define JBT_REG_VSC_VOLTAGE 0xb5 +#define JBT_REG_VCOM_VOLTAGE 0xb6 +#define JBT_REG_EXT_DISPL 0xb7 +#define JBT_REG_OUTPUT_CONTROL 0xb8 +#define JBT_REG_DCCLK_DCEV 0xb9 +#define JBT_REG_DISPLAY_MODE1 0xba +#define JBT_REG_DISPLAY_MODE2 0xbb +#define JBT_REG_DISPLAY_MODE 0xbc +#define JBT_REG_ASW_SLEW 0xbd +#define JBT_REG_DUMMY_DISPLAY 0xbe +#define JBT_REG_DRIVE_SYSTEM 0xbf + +#define JBT_REG_SLEEP_OUT_FR_A 0xc0 +#define JBT_REG_SLEEP_OUT_FR_B 0xc1 +#define JBT_REG_SLEEP_OUT_FR_C 0xc2 +#define JBT_REG_SLEEP_IN_LCCNT_D 0xc3 +#define JBT_REG_SLEEP_IN_LCCNT_E 0xc4 +#define JBT_REG_SLEEP_IN_LCCNT_F 0xc5 +#define JBT_REG_SLEEP_IN_LCCNT_G 0xc6 + +#define JBT_REG_GAMMA1_FINE_1 0xc7 +#define JBT_REG_GAMMA1_FINE_2 0xc8 +#define JBT_REG_GAMMA1_INCLINATION 0xc9 +#define JBT_REG_GAMMA1_BLUE_OFFSET 0xca + +#define JBT_REG_BLANK_CONTROL 0xcf +#define JBT_REG_BLANK_TH_TV 0xd0 +#define JBT_REG_CKV_ON_OFF 0xd1 +#define JBT_REG_CKV_1_2 0xd2 +#define JBT_REG_OEV_TIMING 0xd3 +#define JBT_REG_ASW_TIMING_1 0xd4 +#define JBT_REG_ASW_TIMING_2 0xd5 + +#define JBT_REG_HCLOCK_VGA 0xec +#define JBT_REG_HCLOCK_QVGA 0xed + +struct td028ttec1_panel { + struct drm_panel panel; + + struct spi_device *spi; +}; + +#define to_td028ttec1_device(p) container_of(p, struct td028ttec1_panel, panel) + +/* + * noinline_for_stack so we don't get multiple copies of tx_buf + * on the stack in case of gcc-plugin-structleak + */ +static int noinline_for_stack +jbt_ret_write_0(struct td028ttec1_panel *lcd, u8 reg, int *err) +{ + struct spi_device *spi = lcd->spi; + u16 tx_buf = JBT_COMMAND | reg; + int ret; + + if (err && *err) + return *err; + + ret = spi_write(spi, (u8 *)&tx_buf, sizeof(tx_buf)); + if (ret < 0) { + dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret); + if (err) + *err = ret; + } + + return ret; +} + +static int noinline_for_stack +jbt_reg_write_1(struct td028ttec1_panel *lcd, + u8 reg, u8 data, int *err) +{ + struct spi_device *spi = lcd->spi; + u16 tx_buf[2]; + int ret; + + if (err && *err) + return *err; + + tx_buf[0] = JBT_COMMAND | reg; + tx_buf[1] = JBT_DATA | data; + + ret = spi_write(spi, (u8 *)tx_buf, sizeof(tx_buf)); + if (ret < 0) { + dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret); + if (err) + *err = ret; + } + + return ret; +} + +static int noinline_for_stack +jbt_reg_write_2(struct td028ttec1_panel *lcd, + u8 reg, u16 data, int *err) +{ + struct spi_device *spi = lcd->spi; + u16 tx_buf[3]; + int ret; + + if (err && *err) + return *err; + + tx_buf[0] = JBT_COMMAND | reg; + tx_buf[1] = JBT_DATA | (data >> 8); + tx_buf[2] = JBT_DATA | (data & 0xff); + + ret = spi_write(spi, (u8 *)tx_buf, sizeof(tx_buf)); + if (ret < 0) { + dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret); + if (err) + *err = ret; + } + + return ret; +} + +static int td028ttec1_prepare(struct drm_panel *panel) +{ + struct td028ttec1_panel *lcd = to_td028ttec1_device(panel); + unsigned int i; + int ret = 0; + + /* Three times command zero */ + for (i = 0; i < 3; ++i) { + jbt_ret_write_0(lcd, 0x00, &ret); + usleep_range(1000, 2000); + } + + /* deep standby out */ + jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x17, &ret); + + /* RGB I/F on, RAM write off, QVGA through, SIGCON enable */ + jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE, 0x80, &ret); + + /* Quad mode off */ + jbt_reg_write_1(lcd, JBT_REG_QUAD_RATE, 0x00, &ret); + + /* AVDD on, XVDD on */ + jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x16, &ret); + + /* Output control */ + jbt_reg_write_2(lcd, JBT_REG_OUTPUT_CONTROL, 0xfff9, &ret); + + /* Sleep mode off */ + jbt_ret_write_0(lcd, JBT_REG_SLEEP_OUT, &ret); + + /* at this point we have like 50% grey */ + + /* initialize register set */ + jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE1, 0x01, &ret); + jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE2, 0x00, &ret); + jbt_reg_write_1(lcd, JBT_REG_RGB_FORMAT, 0x60, &ret); + jbt_reg_write_1(lcd, JBT_REG_DRIVE_SYSTEM, 0x10, &ret); + jbt_reg_write_1(lcd, JBT_REG_BOOSTER_OP, 0x56, &ret); + jbt_reg_write_1(lcd, JBT_REG_BOOSTER_MODE, 0x33, &ret); + jbt_reg_write_1(lcd, JBT_REG_BOOSTER_FREQ, 0x11, &ret); + jbt_reg_write_1(lcd, JBT_REG_BOOSTER_FREQ, 0x11, &ret); + jbt_reg_write_1(lcd, JBT_REG_OPAMP_SYSCLK, 0x02, &ret); + jbt_reg_write_1(lcd, JBT_REG_VSC_VOLTAGE, 0x2b, &ret); + jbt_reg_write_1(lcd, JBT_REG_VCOM_VOLTAGE, 0x40, &ret); + jbt_reg_write_1(lcd, JBT_REG_EXT_DISPL, 0x03, &ret); + jbt_reg_write_1(lcd, JBT_REG_DCCLK_DCEV, 0x04, &ret); + /* + * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement + * to avoid red / blue flicker + */ + jbt_reg_write_1(lcd, JBT_REG_ASW_SLEW, 0x04, &ret); + jbt_reg_write_1(lcd, JBT_REG_DUMMY_DISPLAY, 0x00, &ret); + + jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_A, 0x11, &ret); + jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_B, 0x11, &ret); + jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_C, 0x11, &ret); + jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040, &ret); + jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0, &ret); + jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020, &ret); + jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0, &ret); + + jbt_reg_write_2(lcd, JBT_REG_GAMMA1_FINE_1, 0x5533, &ret); + jbt_reg_write_1(lcd, JBT_REG_GAMMA1_FINE_2, 0x00, &ret); + jbt_reg_write_1(lcd, JBT_REG_GAMMA1_INCLINATION, 0x00, &ret); + jbt_reg_write_1(lcd, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00, &ret); + + jbt_reg_write_2(lcd, JBT_REG_HCLOCK_VGA, 0x1f0, &ret); + jbt_reg_write_1(lcd, JBT_REG_BLANK_CONTROL, 0x02, &ret); + jbt_reg_write_2(lcd, JBT_REG_BLANK_TH_TV, 0x0804, &ret); + + jbt_reg_write_1(lcd, JBT_REG_CKV_ON_OFF, 0x01, &ret); + jbt_reg_write_2(lcd, JBT_REG_CKV_1_2, 0x0000, &ret); + + jbt_reg_write_2(lcd, JBT_REG_OEV_TIMING, 0x0d0e, &ret); + jbt_reg_write_2(lcd, JBT_REG_ASW_TIMING_1, 0x11a4, &ret); + jbt_reg_write_1(lcd, JBT_REG_ASW_TIMING_2, 0x0e, &ret); + + return ret; +} + +static int td028ttec1_enable(struct drm_panel *panel) +{ + struct td028ttec1_panel *lcd = to_td028ttec1_device(panel); + + return jbt_ret_write_0(lcd, JBT_REG_DISPLAY_ON, NULL); +} + +static int td028ttec1_disable(struct drm_panel *panel) +{ + struct td028ttec1_panel *lcd = to_td028ttec1_device(panel); + + jbt_ret_write_0(lcd, JBT_REG_DISPLAY_OFF, NULL); + + return 0; +} + +static int td028ttec1_unprepare(struct drm_panel *panel) +{ + struct td028ttec1_panel *lcd = to_td028ttec1_device(panel); + + jbt_reg_write_2(lcd, JBT_REG_OUTPUT_CONTROL, 0x8002, NULL); + jbt_ret_write_0(lcd, JBT_REG_SLEEP_IN, NULL); + jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x00, NULL); + + return 0; +} + +static const struct drm_display_mode td028ttec1_mode = { + .clock = 22153, + .hdisplay = 480, + .hsync_start = 480 + 24, + .hsync_end = 480 + 24 + 8, + .htotal = 480 + 24 + 8 + 8, + .vdisplay = 640, + .vsync_start = 640 + 4, + .vsync_end = 640 + 4 + 2, + .vtotal = 640 + 4 + 2 + 2, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 43, + .height_mm = 58, +}; + +static int td028ttec1_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &td028ttec1_mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + connector->display_info.width_mm = td028ttec1_mode.width_mm; + connector->display_info.height_mm = td028ttec1_mode.height_mm; + /* + * FIXME: According to the datasheet sync signals are sampled on the + * rising edge of the clock, but the code running on the OpenMoko Neo + * FreeRunner and Neo 1973 indicates sampling on the falling edge. This + * should be tested on a real device. + */ + connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE + | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE; + + return 1; +} + +static const struct drm_panel_funcs td028ttec1_funcs = { + .prepare = td028ttec1_prepare, + .enable = td028ttec1_enable, + .disable = td028ttec1_disable, + .unprepare = td028ttec1_unprepare, + .get_modes = td028ttec1_get_modes, +}; + +static int td028ttec1_probe(struct spi_device *spi) +{ + struct td028ttec1_panel *lcd; + int ret; + + lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + spi_set_drvdata(spi, lcd); + lcd->spi = spi; + + spi->mode = SPI_MODE_3; + spi->bits_per_word = 9; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "failed to setup SPI: %d\n", ret); + return ret; + } + + drm_panel_init(&lcd->panel, &lcd->spi->dev, &td028ttec1_funcs, + DRM_MODE_CONNECTOR_DPI); + + ret = drm_panel_of_backlight(&lcd->panel); + if (ret) + return ret; + + drm_panel_add(&lcd->panel); + + return 0; +} + +static void td028ttec1_remove(struct spi_device *spi) +{ + struct td028ttec1_panel *lcd = spi_get_drvdata(spi); + + drm_panel_remove(&lcd->panel); + drm_panel_disable(&lcd->panel); + drm_panel_unprepare(&lcd->panel); +} + +static const struct of_device_id td028ttec1_of_match[] = { + { .compatible = "tpo,td028ttec1", }, + /* DT backward compatibility. */ + { .compatible = "toppoly,td028ttec1", }, + { /* sentinel */ }, +}; + +MODULE_DEVICE_TABLE(of, td028ttec1_of_match); + +static const struct spi_device_id td028ttec1_ids[] = { + { "td028ttec1", 0 }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(spi, td028ttec1_ids); + +static struct spi_driver td028ttec1_driver = { + .probe = td028ttec1_probe, + .remove = td028ttec1_remove, + .id_table = td028ttec1_ids, + .driver = { + .name = "panel-tpo-td028ttec1", + .of_match_table = td028ttec1_of_match, + }, +}; + +module_spi_driver(td028ttec1_driver); + +MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>"); +MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver"); +MODULE_LICENSE("GPL"); |