diff options
Diffstat (limited to 'drivers/gpu/drm/solomon/ssd130x-spi.c')
| -rw-r--r-- | drivers/gpu/drm/solomon/ssd130x-spi.c | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/drivers/gpu/drm/solomon/ssd130x-spi.c b/drivers/gpu/drm/solomon/ssd130x-spi.c new file mode 100644 index 0000000000..19ab4942cb --- /dev/null +++ b/drivers/gpu/drm/solomon/ssd130x-spi.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * DRM driver for Solomon SSD130X OLED displays (SPI bus) + * + * Copyright 2022 Red Hat Inc. + * Authors: Javier Martinez Canillas <javierm@redhat.com> + */ +#include <linux/spi/spi.h> +#include <linux/module.h> + +#include "ssd130x.h" + +#define DRIVER_NAME "ssd130x-spi" +#define DRIVER_DESC "DRM driver for Solomon SSD130X OLED displays (SPI)" + +struct ssd130x_spi_transport { + struct spi_device *spi; + struct gpio_desc *dc; +}; + +/* + * The regmap bus .write handler, it is just a wrapper around spi_write() + * but toggling the Data/Command control pin (D/C#). Since for 4-wire SPI + * a D/C# pin is used, in contrast with I2C where a control byte is sent, + * prior to every data byte, that contains a bit with the D/C# value. + * + * These control bytes are considered registers by the ssd130x core driver + * and can be used by the ssd130x SPI driver to determine if the data sent + * is for a command register or for the Graphic Display Data RAM (GDDRAM). + */ +static int ssd130x_spi_write(void *context, const void *data, size_t count) +{ + struct ssd130x_spi_transport *t = context; + struct spi_device *spi = t->spi; + const u8 *reg = data; + + if (*reg == SSD130X_COMMAND) + gpiod_set_value_cansleep(t->dc, 0); + + if (*reg == SSD130X_DATA) + gpiod_set_value_cansleep(t->dc, 1); + + /* Remove control byte since is not used in a 4-wire SPI interface */ + return spi_write(spi, reg + 1, count - 1); +} + +/* The ssd130x driver does not read registers but regmap expects a .read */ +static int ssd130x_spi_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + return -EOPNOTSUPP; +} + +static const struct regmap_config ssd130x_spi_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .write = ssd130x_spi_write, + .read = ssd130x_spi_read, + .can_multi_write = true, +}; + +static int ssd130x_spi_probe(struct spi_device *spi) +{ + struct ssd130x_spi_transport *t; + struct ssd130x_device *ssd130x; + struct regmap *regmap; + struct gpio_desc *dc; + struct device *dev = &spi->dev; + + dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW); + if (IS_ERR(dc)) + return dev_err_probe(dev, PTR_ERR(dc), + "Failed to get dc gpio\n"); + + t = devm_kzalloc(dev, sizeof(*t), GFP_KERNEL); + if (!t) + return dev_err_probe(dev, -ENOMEM, + "Failed to allocate SPI transport data\n"); + + t->spi = spi; + t->dc = dc; + + regmap = devm_regmap_init(dev, NULL, t, &ssd130x_spi_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + ssd130x = ssd130x_probe(dev, regmap); + if (IS_ERR(ssd130x)) + return PTR_ERR(ssd130x); + + spi_set_drvdata(spi, ssd130x); + + return 0; +} + +static void ssd130x_spi_remove(struct spi_device *spi) +{ + struct ssd130x_device *ssd130x = spi_get_drvdata(spi); + + ssd130x_remove(ssd130x); +} + +static void ssd130x_spi_shutdown(struct spi_device *spi) +{ + struct ssd130x_device *ssd130x = spi_get_drvdata(spi); + + ssd130x_shutdown(ssd130x); +} + +static const struct of_device_id ssd130x_of_match[] = { + { + .compatible = "sinowealth,sh1106", + .data = &ssd130x_variants[SH1106_ID], + }, + { + .compatible = "solomon,ssd1305", + .data = &ssd130x_variants[SSD1305_ID], + }, + { + .compatible = "solomon,ssd1306", + .data = &ssd130x_variants[SSD1306_ID], + }, + { + .compatible = "solomon,ssd1307", + .data = &ssd130x_variants[SSD1307_ID], + }, + { + .compatible = "solomon,ssd1309", + .data = &ssd130x_variants[SSD1309_ID], + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ssd130x_of_match); + +#if IS_MODULE(CONFIG_DRM_SSD130X_SPI) +/* + * The SPI core always reports a MODALIAS uevent of the form "spi:<dev>", even + * if the device was registered via OF. This means that the module will not be + * auto loaded, unless it contains an alias that matches the MODALIAS reported. + * + * To workaround this issue, add a SPI device ID table. Even when this should + * not be needed for this driver to match the registered SPI devices. + */ +static const struct spi_device_id ssd130x_spi_table[] = { + { "sh1106", SH1106_ID }, + { "ssd1305", SSD1305_ID }, + { "ssd1306", SSD1306_ID }, + { "ssd1307", SSD1307_ID }, + { "ssd1309", SSD1309_ID }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(spi, ssd130x_spi_table); +#endif + +static struct spi_driver ssd130x_spi_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = ssd130x_of_match, + }, + .probe = ssd130x_spi_probe, + .remove = ssd130x_spi_remove, + .shutdown = ssd130x_spi_shutdown, +}; +module_spi_driver(ssd130x_spi_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Javier Martinez Canillas <javierm@redhat.com>"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(DRM_SSD130X); |