diff options
Diffstat (limited to 'drivers/gpu/drm/tiny/panel-mipi-dbi.c')
-rw-r--r-- | drivers/gpu/drm/tiny/panel-mipi-dbi.c | 400 |
1 files changed, 400 insertions, 0 deletions
diff --git a/drivers/gpu/drm/tiny/panel-mipi-dbi.c b/drivers/gpu/drm/tiny/panel-mipi-dbi.c new file mode 100644 index 0000000000..f80a141fcf --- /dev/null +++ b/drivers/gpu/drm/tiny/panel-mipi-dbi.c @@ -0,0 +1,400 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DRM driver for MIPI DBI compatible display panels + * + * Copyright 2022 Noralf Trønnes + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fbdev_generic.h> +#include <drm/drm_gem_atomic_helper.h> +#include <drm/drm_gem_dma_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_mipi_dbi.h> +#include <drm/drm_modes.h> +#include <drm/drm_modeset_helper.h> + +#include <video/mipi_display.h> + +static const u8 panel_mipi_dbi_magic[15] = { 'M', 'I', 'P', 'I', ' ', 'D', 'B', 'I', + 0, 0, 0, 0, 0, 0, 0 }; + +/* + * The display controller configuration is stored in a firmware file. + * The Device Tree 'compatible' property value with a '.bin' suffix is passed + * to request_firmware() to fetch this file. + */ +struct panel_mipi_dbi_config { + /* Magic string: panel_mipi_dbi_magic */ + u8 magic[15]; + + /* Config file format version */ + u8 file_format_version; + + /* + * MIPI commands to execute when the display pipeline is enabled. + * This is used to configure the display controller. + * + * The commands are stored in a byte array with the format: + * command, num_parameters, [ parameter, ...], command, ... + * + * Some commands require a pause before the next command can be received. + * Inserting a delay in the command sequence is done by using the NOP command with one + * parameter: delay in miliseconds (the No Operation command is part of the MIPI Display + * Command Set where it has no parameters). + * + * Example: + * command 0x11 + * sleep 120ms + * command 0xb1 parameters 0x01, 0x2c, 0x2d + * command 0x29 + * + * Byte sequence: + * 0x11 0x00 + * 0x00 0x01 0x78 + * 0xb1 0x03 0x01 0x2c 0x2d + * 0x29 0x00 + */ + u8 commands[]; +}; + +struct panel_mipi_dbi_commands { + const u8 *buf; + size_t len; +}; + +static struct panel_mipi_dbi_commands * +panel_mipi_dbi_check_commands(struct device *dev, const struct firmware *fw) +{ + const struct panel_mipi_dbi_config *config = (struct panel_mipi_dbi_config *)fw->data; + struct panel_mipi_dbi_commands *commands; + size_t size = fw->size, commands_len; + unsigned int i = 0; + + if (size < sizeof(*config) + 2) { /* At least 1 command */ + dev_err(dev, "config: file size=%zu is too small\n", size); + return ERR_PTR(-EINVAL); + } + + if (memcmp(config->magic, panel_mipi_dbi_magic, sizeof(config->magic))) { + dev_err(dev, "config: Bad magic: %15ph\n", config->magic); + return ERR_PTR(-EINVAL); + } + + if (config->file_format_version != 1) { + dev_err(dev, "config: version=%u is not supported\n", config->file_format_version); + return ERR_PTR(-EINVAL); + } + + drm_dev_dbg(dev, DRM_UT_DRIVER, "size=%zu version=%u\n", size, config->file_format_version); + + commands_len = size - sizeof(*config); + + while ((i + 1) < commands_len) { + u8 command = config->commands[i++]; + u8 num_parameters = config->commands[i++]; + const u8 *parameters = &config->commands[i]; + + i += num_parameters; + if (i > commands_len) { + dev_err(dev, "config: command=0x%02x num_parameters=%u overflows\n", + command, num_parameters); + return ERR_PTR(-EINVAL); + } + + if (command == 0x00 && num_parameters == 1) + drm_dev_dbg(dev, DRM_UT_DRIVER, "sleep %ums\n", parameters[0]); + else + drm_dev_dbg(dev, DRM_UT_DRIVER, "command %02x %*ph\n", + command, num_parameters, parameters); + } + + if (i != commands_len) { + dev_err(dev, "config: malformed command array\n"); + return ERR_PTR(-EINVAL); + } + + commands = devm_kzalloc(dev, sizeof(*commands), GFP_KERNEL); + if (!commands) + return ERR_PTR(-ENOMEM); + + commands->len = commands_len; + commands->buf = devm_kmemdup(dev, config->commands, commands->len, GFP_KERNEL); + if (!commands->buf) + return ERR_PTR(-ENOMEM); + + return commands; +} + +static struct panel_mipi_dbi_commands *panel_mipi_dbi_commands_from_fw(struct device *dev) +{ + struct panel_mipi_dbi_commands *commands; + const struct firmware *fw; + const char *compatible; + char fw_name[40]; + int ret; + + ret = of_property_read_string_index(dev->of_node, "compatible", 0, &compatible); + if (ret) + return ERR_PTR(ret); + + snprintf(fw_name, sizeof(fw_name), "%s.bin", compatible); + ret = request_firmware(&fw, fw_name, dev); + if (ret) { + dev_err(dev, "No config file found for compatible '%s' (error=%d)\n", + compatible, ret); + + return ERR_PTR(ret); + } + + commands = panel_mipi_dbi_check_commands(dev, fw); + release_firmware(fw); + + return commands; +} + +static void panel_mipi_dbi_commands_execute(struct mipi_dbi *dbi, + struct panel_mipi_dbi_commands *commands) +{ + unsigned int i = 0; + + if (!commands) + return; + + while (i < commands->len) { + u8 command = commands->buf[i++]; + u8 num_parameters = commands->buf[i++]; + const u8 *parameters = &commands->buf[i]; + + if (command == 0x00 && num_parameters == 1) + msleep(parameters[0]); + else if (num_parameters) + mipi_dbi_command_stackbuf(dbi, command, parameters, num_parameters); + else + mipi_dbi_command(dbi, command); + + i += num_parameters; + } +} + +static void panel_mipi_dbi_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state, + struct drm_plane_state *plane_state) +{ + struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); + struct mipi_dbi *dbi = &dbidev->dbi; + int ret, idx; + + if (!drm_dev_enter(pipe->crtc.dev, &idx)) + return; + + drm_dbg(pipe->crtc.dev, "\n"); + + ret = mipi_dbi_poweron_conditional_reset(dbidev); + if (ret < 0) + goto out_exit; + if (!ret) + panel_mipi_dbi_commands_execute(dbi, dbidev->driver_private); + + mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); +out_exit: + drm_dev_exit(idx); +} + +static const struct drm_simple_display_pipe_funcs panel_mipi_dbi_pipe_funcs = { + DRM_MIPI_DBI_SIMPLE_DISPLAY_PIPE_FUNCS(panel_mipi_dbi_enable), +}; + +DEFINE_DRM_GEM_DMA_FOPS(panel_mipi_dbi_fops); + +static const struct drm_driver panel_mipi_dbi_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &panel_mipi_dbi_fops, + DRM_GEM_DMA_DRIVER_OPS_VMAP, + .debugfs_init = mipi_dbi_debugfs_init, + .name = "panel-mipi-dbi", + .desc = "MIPI DBI compatible display panel", + .date = "20220103", + .major = 1, + .minor = 0, +}; + +static int panel_mipi_dbi_get_mode(struct mipi_dbi_dev *dbidev, struct drm_display_mode *mode) +{ + struct device *dev = dbidev->drm.dev; + u16 hback_porch, vback_porch; + int ret; + + ret = of_get_drm_panel_display_mode(dev->of_node, mode, NULL); + if (ret) { + dev_err(dev, "%pOF: failed to get panel-timing (error=%d)\n", dev->of_node, ret); + return ret; + } + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + hback_porch = mode->htotal - mode->hsync_end; + vback_porch = mode->vtotal - mode->vsync_end; + + /* + * Make sure width and height are set and that only back porch and + * pixelclock are set in the other timing values. Also check that + * width and height don't exceed the 16-bit value specified by MIPI DCS. + */ + if (!mode->hdisplay || !mode->vdisplay || mode->flags || + mode->hsync_end > mode->hdisplay || (hback_porch + mode->hdisplay) > 0xffff || + mode->vsync_end > mode->vdisplay || (vback_porch + mode->vdisplay) > 0xffff) { + dev_err(dev, "%pOF: panel-timing out of bounds\n", dev->of_node); + return -EINVAL; + } + + /* The driver doesn't use the pixel clock but it is mandatory so fake one if not set */ + if (!mode->clock) + mode->clock = mode->htotal * mode->vtotal * 60 / 1000; + + dbidev->top_offset = vback_porch; + dbidev->left_offset = hback_porch; + + return 0; +} + +static int panel_mipi_dbi_spi_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct drm_display_mode mode; + struct mipi_dbi_dev *dbidev; + struct drm_device *drm; + struct mipi_dbi *dbi; + struct gpio_desc *dc; + int ret; + + dbidev = devm_drm_dev_alloc(dev, &panel_mipi_dbi_driver, struct mipi_dbi_dev, drm); + if (IS_ERR(dbidev)) + return PTR_ERR(dbidev); + + dbi = &dbidev->dbi; + drm = &dbidev->drm; + + ret = panel_mipi_dbi_get_mode(dbidev, &mode); + if (ret) + return ret; + + dbidev->regulator = devm_regulator_get(dev, "power"); + if (IS_ERR(dbidev->regulator)) + return dev_err_probe(dev, PTR_ERR(dbidev->regulator), + "Failed to get regulator 'power'\n"); + + dbidev->io_regulator = devm_regulator_get(dev, "io"); + if (IS_ERR(dbidev->io_regulator)) + return dev_err_probe(dev, PTR_ERR(dbidev->io_regulator), + "Failed to get regulator 'io'\n"); + + dbidev->backlight = devm_of_find_backlight(dev); + if (IS_ERR(dbidev->backlight)) + return dev_err_probe(dev, PTR_ERR(dbidev->backlight), "Failed to get backlight\n"); + + dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(dbi->reset)) + return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n"); + + /* Multiple panels can share the "dc" GPIO, but only if they are on the same SPI bus! */ + dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); + if (IS_ERR(dc)) + return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n"); + + ret = mipi_dbi_spi_init(spi, dbi, dc); + if (ret) + return ret; + + if (device_property_present(dev, "write-only")) + dbi->read_commands = NULL; + + dbidev->driver_private = panel_mipi_dbi_commands_from_fw(dev); + if (IS_ERR(dbidev->driver_private)) + return PTR_ERR(dbidev->driver_private); + + ret = mipi_dbi_dev_init(dbidev, &panel_mipi_dbi_pipe_funcs, &mode, 0); + if (ret) + return ret; + + drm_mode_config_reset(drm); + + ret = drm_dev_register(drm, 0); + if (ret) + return ret; + + spi_set_drvdata(spi, drm); + + drm_fbdev_generic_setup(drm, 0); + + return 0; +} + +static void panel_mipi_dbi_spi_remove(struct spi_device *spi) +{ + struct drm_device *drm = spi_get_drvdata(spi); + + drm_dev_unplug(drm); + drm_atomic_helper_shutdown(drm); +} + +static void panel_mipi_dbi_spi_shutdown(struct spi_device *spi) +{ + drm_atomic_helper_shutdown(spi_get_drvdata(spi)); +} + +static int __maybe_unused panel_mipi_dbi_pm_suspend(struct device *dev) +{ + return drm_mode_config_helper_suspend(dev_get_drvdata(dev)); +} + +static int __maybe_unused panel_mipi_dbi_pm_resume(struct device *dev) +{ + drm_mode_config_helper_resume(dev_get_drvdata(dev)); + + return 0; +} + +static const struct dev_pm_ops panel_mipi_dbi_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(panel_mipi_dbi_pm_suspend, panel_mipi_dbi_pm_resume) +}; + +static const struct of_device_id panel_mipi_dbi_spi_of_match[] = { + { .compatible = "panel-mipi-dbi-spi" }, + {}, +}; +MODULE_DEVICE_TABLE(of, panel_mipi_dbi_spi_of_match); + +static const struct spi_device_id panel_mipi_dbi_spi_id[] = { + { "panel-mipi-dbi-spi", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(spi, panel_mipi_dbi_spi_id); + +static struct spi_driver panel_mipi_dbi_spi_driver = { + .driver = { + .name = "panel-mipi-dbi-spi", + .owner = THIS_MODULE, + .of_match_table = panel_mipi_dbi_spi_of_match, + .pm = &panel_mipi_dbi_pm_ops, + }, + .id_table = panel_mipi_dbi_spi_id, + .probe = panel_mipi_dbi_spi_probe, + .remove = panel_mipi_dbi_spi_remove, + .shutdown = panel_mipi_dbi_spi_shutdown, +}; +module_spi_driver(panel_mipi_dbi_spi_driver); + +MODULE_DESCRIPTION("MIPI DBI compatible display panel driver"); +MODULE_AUTHOR("Noralf Trønnes"); +MODULE_LICENSE("GPL"); |