diff options
Diffstat (limited to 'drivers/hwmon/pmbus/lt7182s.c')
| -rw-r--r-- | drivers/hwmon/pmbus/lt7182s.c | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/lt7182s.c b/drivers/hwmon/pmbus/lt7182s.c new file mode 100644 index 0000000000..28afc5f15a --- /dev/null +++ b/drivers/hwmon/pmbus/lt7182s.c @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Hardware monitoring driver for Analog Devices LT7182S + * + * Copyright (c) 2022 Guenter Roeck + * + */ + +#include <linux/bits.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include "pmbus.h" + +#define LT7182S_NUM_PAGES 2 + +#define MFR_READ_EXTVCC 0xcd +#define MFR_READ_ITH 0xce +#define MFR_CONFIG_ALL_LT7182S 0xd1 +#define MFR_IOUT_PEAK 0xd7 +#define MFR_ADC_CONTROL_LT7182S 0xd8 + +#define MFR_DEBUG_TELEMETRY BIT(0) + +#define MFR_VOUT_PEAK 0xdd +#define MFR_VIN_PEAK 0xde +#define MFR_TEMPERATURE_1_PEAK 0xdf +#define MFR_CLEAR_PEAKS 0xe3 + +#define MFR_CONFIG_IEEE BIT(8) + +static int lt7182s_read_word_data(struct i2c_client *client, int page, int phase, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VIRT_READ_VMON: + if (page == 0 || page == 1) + ret = pmbus_read_word_data(client, page, phase, MFR_READ_ITH); + else + ret = pmbus_read_word_data(client, 0, phase, MFR_READ_EXTVCC); + break; + case PMBUS_VIRT_READ_IOUT_MAX: + ret = pmbus_read_word_data(client, page, phase, MFR_IOUT_PEAK); + break; + case PMBUS_VIRT_READ_VOUT_MAX: + ret = pmbus_read_word_data(client, page, phase, MFR_VOUT_PEAK); + break; + case PMBUS_VIRT_READ_VIN_MAX: + ret = pmbus_read_word_data(client, page, phase, MFR_VIN_PEAK); + break; + case PMBUS_VIRT_READ_TEMP_MAX: + ret = pmbus_read_word_data(client, page, phase, MFR_TEMPERATURE_1_PEAK); + break; + case PMBUS_VIRT_RESET_VIN_HISTORY: + ret = (page == 0) ? 0 : -ENODATA; + break; + default: + ret = -ENODATA; + break; + } + return ret; +} + +static int lt7182s_write_word_data(struct i2c_client *client, int page, int reg, u16 word) +{ + int ret; + + switch (reg) { + case PMBUS_VIRT_RESET_VIN_HISTORY: + ret = pmbus_write_byte(client, 0, MFR_CLEAR_PEAKS); + break; + default: + ret = -ENODATA; + break; + } + return ret; +} + +static struct pmbus_driver_info lt7182s_info = { + .pages = LT7182S_NUM_PAGES, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = linear, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_POWER] = linear, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | + PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP, + .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | + PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | + PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_STATUS_INPUT, + .read_word_data = lt7182s_read_word_data, + .write_word_data = lt7182s_write_word_data, +}; + +static int lt7182s_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct pmbus_driver_info *info; + u8 buf[I2C_SMBUS_BLOCK_MAX + 1]; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_READ_WORD_DATA | + I2C_FUNC_SMBUS_READ_BLOCK_DATA)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf); + if (ret < 0) { + dev_err(dev, "Failed to read PMBUS_MFR_ID\n"); + return ret; + } + if (ret != 3 || strncmp(buf, "ADI", 3)) { + buf[ret] = '\0'; + dev_err(dev, "Manufacturer '%s' not supported\n", buf); + return -ENODEV; + } + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); + if (ret < 0) { + dev_err(dev, "Failed to read PMBUS_MFR_MODEL\n"); + return ret; + } + if (ret != 7 || strncmp(buf, "LT7182S", 7)) { + buf[ret] = '\0'; + dev_err(dev, "Model '%s' not supported\n", buf); + return -ENODEV; + } + + info = devm_kmemdup(dev, <7182s_info, + sizeof(struct pmbus_driver_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + /* Set data format to IEEE754 if configured */ + ret = i2c_smbus_read_word_data(client, MFR_CONFIG_ALL_LT7182S); + if (ret < 0) + return ret; + if (ret & MFR_CONFIG_IEEE) { + info->format[PSC_VOLTAGE_IN] = ieee754; + info->format[PSC_VOLTAGE_OUT] = ieee754; + info->format[PSC_CURRENT_IN] = ieee754; + info->format[PSC_CURRENT_OUT] = ieee754; + info->format[PSC_TEMPERATURE] = ieee754; + info->format[PSC_POWER] = ieee754; + } + + /* Enable VMON output if configured */ + ret = i2c_smbus_read_byte_data(client, MFR_ADC_CONTROL_LT7182S); + if (ret < 0) + return ret; + if (ret & MFR_DEBUG_TELEMETRY) { + info->pages = 3; + info->func[0] |= PMBUS_HAVE_VMON; + info->func[1] |= PMBUS_HAVE_VMON; + info->func[2] = PMBUS_HAVE_VMON; + } + + return pmbus_do_probe(client, info); +} + +static const struct i2c_device_id lt7182s_id[] = { + { "lt7182s", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, lt7182s_id); + +static const struct of_device_id __maybe_unused lt7182s_of_match[] = { + { .compatible = "adi,lt7182s" }, + {} +}; + +static struct i2c_driver lt7182s_driver = { + .driver = { + .name = "lt7182s", + .of_match_table = of_match_ptr(lt7182s_of_match), + }, + .probe = lt7182s_probe, + .id_table = lt7182s_id, +}; + +module_i2c_driver(lt7182s_driver); + +MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); +MODULE_DESCRIPTION("PMBus driver for Analog Devices LT7182S"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); |