diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/hwmon/pwm-fan.c | 45 |
1 files changed, 26 insertions, 19 deletions
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index b67bc9e833..a1712649b0 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -9,10 +9,11 @@ #include <linux/hwmon.h> #include <linux/interrupt.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/mutex.h> -#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/pwm.h> #include <linux/regulator/consumer.h> #include <linux/sysfs.h> @@ -25,7 +26,6 @@ struct pwm_fan_tach { int irq; atomic_t pulses; unsigned int rpm; - u8 pulses_per_revolution; }; enum pwm_fan_enable_mode { @@ -48,6 +48,7 @@ struct pwm_fan_ctx { int tach_count; struct pwm_fan_tach *tachs; + u32 *pulses_per_revolution; ktime_t sample_start; struct timer_list rpm_timer; @@ -85,7 +86,7 @@ static void sample_timer(struct timer_list *t) pulses = atomic_read(&tach->pulses); atomic_sub(pulses, &tach->pulses); tach->rpm = (unsigned int)(pulses * 1000 * 60) / - (tach->pulses_per_revolution * delta); + (ctx->pulses_per_revolution[i] * delta); } ctx->sample_start = ktime_get(); @@ -421,16 +422,14 @@ static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = { .set_cur_state = pwm_fan_set_cur_state, }; -static int pwm_fan_of_get_cooling_data(struct device *dev, - struct pwm_fan_ctx *ctx) +static int pwm_fan_get_cooling_data(struct device *dev, struct pwm_fan_ctx *ctx) { - struct device_node *np = dev->of_node; int num, i, ret; - if (!of_property_present(np, "cooling-levels")) + if (!device_property_present(dev, "cooling-levels")) return 0; - ret = of_property_count_u32_elems(np, "cooling-levels"); + ret = device_property_count_u32(dev, "cooling-levels"); if (ret <= 0) { dev_err(dev, "Wrong data!\n"); return ret ? : -EINVAL; @@ -442,8 +441,8 @@ static int pwm_fan_of_get_cooling_data(struct device *dev, if (!ctx->pwm_fan_cooling_levels) return -ENOMEM; - ret = of_property_read_u32_array(np, "cooling-levels", - ctx->pwm_fan_cooling_levels, num); + ret = device_property_read_u32_array(dev, "cooling-levels", + ctx->pwm_fan_cooling_levels, num); if (ret) { dev_err(dev, "Property 'cooling-levels' cannot be read!\n"); return ret; @@ -562,6 +561,20 @@ static int pwm_fan_probe(struct platform_device *pdev) if (!fan_channel_config) return -ENOMEM; ctx->fan_channel.config = fan_channel_config; + + ctx->pulses_per_revolution = devm_kmalloc_array(dev, + ctx->tach_count, + sizeof(*ctx->pulses_per_revolution), + GFP_KERNEL); + if (!ctx->pulses_per_revolution) + return -ENOMEM; + + /* Setup default pulses per revolution */ + for (i = 0; i < ctx->tach_count; i++) + ctx->pulses_per_revolution[i] = 2; + + device_property_read_u32_array(dev, "pulses-per-revolution", + ctx->pulses_per_revolution, ctx->tach_count); } channels = devm_kcalloc(dev, channel_count + 1, @@ -573,7 +586,6 @@ static int pwm_fan_probe(struct platform_device *pdev) for (i = 0; i < ctx->tach_count; i++) { struct pwm_fan_tach *tach = &ctx->tachs[i]; - u32 ppr = 2; tach->irq = platform_get_irq(pdev, i); if (tach->irq == -EPROBE_DEFER) @@ -589,12 +601,7 @@ static int pwm_fan_probe(struct platform_device *pdev) } } - of_property_read_u32_index(dev->of_node, - "pulses-per-revolution", - i, - &ppr); - tach->pulses_per_revolution = ppr; - if (!tach->pulses_per_revolution) { + if (!ctx->pulses_per_revolution[i]) { dev_err(dev, "pulses-per-revolution can't be zero.\n"); return -EINVAL; } @@ -602,7 +609,7 @@ static int pwm_fan_probe(struct platform_device *pdev) fan_channel_config[i] = HWMON_F_INPUT; dev_dbg(dev, "tach%d: irq=%d, pulses_per_revolution=%d\n", - i, tach->irq, tach->pulses_per_revolution); + i, tach->irq, ctx->pulses_per_revolution[i]); } if (ctx->tach_count > 0) { @@ -622,7 +629,7 @@ static int pwm_fan_probe(struct platform_device *pdev) return PTR_ERR(hwmon); } - ret = pwm_fan_of_get_cooling_data(dev, ctx); + ret = pwm_fan_get_cooling_data(dev, ctx); if (ret) return ret; |