diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-bcm-iproc.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-bcm-iproc.c | 1275 |
1 files changed, 1275 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c new file mode 100644 index 0000000000..e905734c26 --- /dev/null +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -0,0 +1,1275 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2014 Broadcom Corporation + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define IDM_CTRL_DIRECT_OFFSET 0x00 +#define CFG_OFFSET 0x00 +#define CFG_RESET_SHIFT 31 +#define CFG_EN_SHIFT 30 +#define CFG_SLAVE_ADDR_0_SHIFT 28 +#define CFG_M_RETRY_CNT_SHIFT 16 +#define CFG_M_RETRY_CNT_MASK 0x0f + +#define TIM_CFG_OFFSET 0x04 +#define TIM_CFG_MODE_400_SHIFT 31 +#define TIM_RAND_SLAVE_STRETCH_SHIFT 24 +#define TIM_RAND_SLAVE_STRETCH_MASK 0x7f +#define TIM_PERIODIC_SLAVE_STRETCH_SHIFT 16 +#define TIM_PERIODIC_SLAVE_STRETCH_MASK 0x7f + +#define S_CFG_SMBUS_ADDR_OFFSET 0x08 +#define S_CFG_EN_NIC_SMB_ADDR3_SHIFT 31 +#define S_CFG_NIC_SMB_ADDR3_SHIFT 24 +#define S_CFG_NIC_SMB_ADDR3_MASK 0x7f +#define S_CFG_EN_NIC_SMB_ADDR2_SHIFT 23 +#define S_CFG_NIC_SMB_ADDR2_SHIFT 16 +#define S_CFG_NIC_SMB_ADDR2_MASK 0x7f +#define S_CFG_EN_NIC_SMB_ADDR1_SHIFT 15 +#define S_CFG_NIC_SMB_ADDR1_SHIFT 8 +#define S_CFG_NIC_SMB_ADDR1_MASK 0x7f +#define S_CFG_EN_NIC_SMB_ADDR0_SHIFT 7 +#define S_CFG_NIC_SMB_ADDR0_SHIFT 0 +#define S_CFG_NIC_SMB_ADDR0_MASK 0x7f + +#define M_FIFO_CTRL_OFFSET 0x0c +#define M_FIFO_RX_FLUSH_SHIFT 31 +#define M_FIFO_TX_FLUSH_SHIFT 30 +#define M_FIFO_RX_CNT_SHIFT 16 +#define M_FIFO_RX_CNT_MASK 0x7f +#define M_FIFO_RX_THLD_SHIFT 8 +#define M_FIFO_RX_THLD_MASK 0x3f + +#define S_FIFO_CTRL_OFFSET 0x10 +#define S_FIFO_RX_FLUSH_SHIFT 31 +#define S_FIFO_TX_FLUSH_SHIFT 30 +#define S_FIFO_RX_CNT_SHIFT 16 +#define S_FIFO_RX_CNT_MASK 0x7f +#define S_FIFO_RX_THLD_SHIFT 8 +#define S_FIFO_RX_THLD_MASK 0x3f + +#define M_CMD_OFFSET 0x30 +#define M_CMD_START_BUSY_SHIFT 31 +#define M_CMD_STATUS_SHIFT 25 +#define M_CMD_STATUS_MASK 0x07 +#define M_CMD_STATUS_SUCCESS 0x0 +#define M_CMD_STATUS_LOST_ARB 0x1 +#define M_CMD_STATUS_NACK_ADDR 0x2 +#define M_CMD_STATUS_NACK_DATA 0x3 +#define M_CMD_STATUS_TIMEOUT 0x4 +#define M_CMD_STATUS_FIFO_UNDERRUN 0x5 +#define M_CMD_STATUS_RX_FIFO_FULL 0x6 +#define M_CMD_PROTOCOL_SHIFT 9 +#define M_CMD_PROTOCOL_MASK 0xf +#define M_CMD_PROTOCOL_QUICK 0x0 +#define M_CMD_PROTOCOL_BLK_WR 0x7 +#define M_CMD_PROTOCOL_BLK_RD 0x8 +#define M_CMD_PROTOCOL_PROCESS 0xa +#define M_CMD_PEC_SHIFT 8 +#define M_CMD_RD_CNT_SHIFT 0 +#define M_CMD_RD_CNT_MASK 0xff + +#define S_CMD_OFFSET 0x34 +#define S_CMD_START_BUSY_SHIFT 31 +#define S_CMD_STATUS_SHIFT 23 +#define S_CMD_STATUS_MASK 0x07 +#define S_CMD_STATUS_SUCCESS 0x0 +#define S_CMD_STATUS_TIMEOUT 0x5 +#define S_CMD_STATUS_MASTER_ABORT 0x7 + +#define IE_OFFSET 0x38 +#define IE_M_RX_FIFO_FULL_SHIFT 31 +#define IE_M_RX_THLD_SHIFT 30 +#define IE_M_START_BUSY_SHIFT 28 +#define IE_M_TX_UNDERRUN_SHIFT 27 +#define IE_S_RX_FIFO_FULL_SHIFT 26 +#define IE_S_RX_THLD_SHIFT 25 +#define IE_S_RX_EVENT_SHIFT 24 +#define IE_S_START_BUSY_SHIFT 23 +#define IE_S_TX_UNDERRUN_SHIFT 22 +#define IE_S_RD_EVENT_SHIFT 21 + +#define IS_OFFSET 0x3c +#define IS_M_RX_FIFO_FULL_SHIFT 31 +#define IS_M_RX_THLD_SHIFT 30 +#define IS_M_START_BUSY_SHIFT 28 +#define IS_M_TX_UNDERRUN_SHIFT 27 +#define IS_S_RX_FIFO_FULL_SHIFT 26 +#define IS_S_RX_THLD_SHIFT 25 +#define IS_S_RX_EVENT_SHIFT 24 +#define IS_S_START_BUSY_SHIFT 23 +#define IS_S_TX_UNDERRUN_SHIFT 22 +#define IS_S_RD_EVENT_SHIFT 21 + +#define M_TX_OFFSET 0x40 +#define M_TX_WR_STATUS_SHIFT 31 +#define M_TX_DATA_SHIFT 0 +#define M_TX_DATA_MASK 0xff + +#define M_RX_OFFSET 0x44 +#define M_RX_STATUS_SHIFT 30 +#define M_RX_STATUS_MASK 0x03 +#define M_RX_PEC_ERR_SHIFT 29 +#define M_RX_DATA_SHIFT 0 +#define M_RX_DATA_MASK 0xff + +#define S_TX_OFFSET 0x48 +#define S_TX_WR_STATUS_SHIFT 31 +#define S_TX_DATA_SHIFT 0 +#define S_TX_DATA_MASK 0xff + +#define S_RX_OFFSET 0x4c +#define S_RX_STATUS_SHIFT 30 +#define S_RX_STATUS_MASK 0x03 +#define S_RX_PEC_ERR_SHIFT 29 +#define S_RX_DATA_SHIFT 0 +#define S_RX_DATA_MASK 0xff + +#define I2C_TIMEOUT_MSEC 50000 +#define M_TX_RX_FIFO_SIZE 64 +#define M_RX_FIFO_MAX_THLD_VALUE (M_TX_RX_FIFO_SIZE - 1) + +#define M_RX_MAX_READ_LEN 255 +#define M_RX_FIFO_THLD_VALUE 50 + +#define IE_M_ALL_INTERRUPT_SHIFT 27 +#define IE_M_ALL_INTERRUPT_MASK 0x1e + +#define SLAVE_READ_WRITE_BIT_MASK 0x1 +#define SLAVE_READ_WRITE_BIT_SHIFT 0x1 +#define SLAVE_MAX_SIZE_TRANSACTION 64 +#define SLAVE_CLOCK_STRETCH_TIME 25 + +#define IE_S_ALL_INTERRUPT_SHIFT 21 +#define IE_S_ALL_INTERRUPT_MASK 0x3f +/* + * It takes ~18us to reading 10bytes of data, hence to keep tasklet + * running for less time, max slave read per tasklet is set to 10 bytes. + */ +#define MAX_SLAVE_RX_PER_INT 10 + +enum i2c_slave_read_status { + I2C_SLAVE_RX_FIFO_EMPTY = 0, + I2C_SLAVE_RX_START, + I2C_SLAVE_RX_DATA, + I2C_SLAVE_RX_END, +}; + +enum bus_speed_index { + I2C_SPD_100K = 0, + I2C_SPD_400K, +}; + +enum bcm_iproc_i2c_type { + IPROC_I2C, + IPROC_I2C_NIC +}; + +struct bcm_iproc_i2c_dev { + struct device *device; + enum bcm_iproc_i2c_type type; + int irq; + + void __iomem *base; + void __iomem *idm_base; + + u32 ape_addr_mask; + + /* lock for indirect access through IDM */ + spinlock_t idm_lock; + + struct i2c_adapter adapter; + unsigned int bus_speed; + + struct completion done; + int xfer_is_done; + + struct i2c_msg *msg; + + struct i2c_client *slave; + + /* bytes that have been transferred */ + unsigned int tx_bytes; + /* bytes that have been read */ + unsigned int rx_bytes; + unsigned int thld_bytes; + + bool slave_rx_only; + bool rx_start_rcvd; + bool slave_read_complete; + u32 tx_underrun; + u32 slave_int_mask; + struct tasklet_struct slave_rx_tasklet; +}; + +/* tasklet to process slave rx data */ +static void slave_rx_tasklet_fn(unsigned long); + +/* + * Can be expanded in the future if more interrupt status bits are utilized + */ +#define ISR_MASK (BIT(IS_M_START_BUSY_SHIFT) | BIT(IS_M_TX_UNDERRUN_SHIFT)\ + | BIT(IS_M_RX_THLD_SHIFT)) + +#define ISR_MASK_SLAVE (BIT(IS_S_START_BUSY_SHIFT)\ + | BIT(IS_S_RX_EVENT_SHIFT) | BIT(IS_S_RD_EVENT_SHIFT)\ + | BIT(IS_S_TX_UNDERRUN_SHIFT) | BIT(IS_S_RX_FIFO_FULL_SHIFT)\ + | BIT(IS_S_RX_THLD_SHIFT)) + +static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave); +static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave); +static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, + bool enable); + +static inline u32 iproc_i2c_rd_reg(struct bcm_iproc_i2c_dev *iproc_i2c, + u32 offset) +{ + u32 val; + unsigned long flags; + + if (iproc_i2c->idm_base) { + spin_lock_irqsave(&iproc_i2c->idm_lock, flags); + writel(iproc_i2c->ape_addr_mask, + iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET); + val = readl(iproc_i2c->base + offset); + spin_unlock_irqrestore(&iproc_i2c->idm_lock, flags); + } else { + val = readl(iproc_i2c->base + offset); + } + + return val; +} + +static inline void iproc_i2c_wr_reg(struct bcm_iproc_i2c_dev *iproc_i2c, + u32 offset, u32 val) +{ + unsigned long flags; + + if (iproc_i2c->idm_base) { + spin_lock_irqsave(&iproc_i2c->idm_lock, flags); + writel(iproc_i2c->ape_addr_mask, + iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET); + writel(val, iproc_i2c->base + offset); + spin_unlock_irqrestore(&iproc_i2c->idm_lock, flags); + } else { + writel(val, iproc_i2c->base + offset); + } +} + +static void bcm_iproc_i2c_slave_init( + struct bcm_iproc_i2c_dev *iproc_i2c, bool need_reset) +{ + u32 val; + + iproc_i2c->tx_underrun = 0; + if (need_reset) { + /* put controller in reset */ + val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); + val |= BIT(CFG_RESET_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); + + /* wait 100 usec per spec */ + udelay(100); + + /* bring controller out of reset */ + val &= ~(BIT(CFG_RESET_SHIFT)); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); + } + + /* flush TX/RX FIFOs */ + val = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT)); + iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val); + + /* Maximum slave stretch time */ + val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); + val &= ~(TIM_RAND_SLAVE_STRETCH_MASK << TIM_RAND_SLAVE_STRETCH_SHIFT); + val |= (SLAVE_CLOCK_STRETCH_TIME << TIM_RAND_SLAVE_STRETCH_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); + + /* Configure the slave address */ + val = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET); + val |= BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT); + val &= ~(S_CFG_NIC_SMB_ADDR3_MASK << S_CFG_NIC_SMB_ADDR3_SHIFT); + val |= (iproc_i2c->slave->addr << S_CFG_NIC_SMB_ADDR3_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, val); + + /* clear all pending slave interrupts */ + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE); + + /* Enable interrupt register to indicate a valid byte in receive fifo */ + val = BIT(IE_S_RX_EVENT_SHIFT); + /* Enable interrupt register to indicate Slave Rx FIFO Full */ + val |= BIT(IE_S_RX_FIFO_FULL_SHIFT); + /* Enable interrupt register to indicate a Master read transaction */ + val |= BIT(IE_S_RD_EVENT_SHIFT); + /* Enable interrupt register for the Slave BUSY command */ + val |= BIT(IE_S_START_BUSY_SHIFT); + iproc_i2c->slave_int_mask = val; + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); +} + +static bool bcm_iproc_i2c_check_slave_status + (struct bcm_iproc_i2c_dev *iproc_i2c, u32 status) +{ + u32 val; + bool recover = false; + + /* check slave transmit status only if slave is transmitting */ + if (!iproc_i2c->slave_rx_only) { + val = iproc_i2c_rd_reg(iproc_i2c, S_CMD_OFFSET); + /* status is valid only when START_BUSY is cleared */ + if (!(val & BIT(S_CMD_START_BUSY_SHIFT))) { + val = (val >> S_CMD_STATUS_SHIFT) & S_CMD_STATUS_MASK; + if (val == S_CMD_STATUS_TIMEOUT || + val == S_CMD_STATUS_MASTER_ABORT) { + dev_warn(iproc_i2c->device, + (val == S_CMD_STATUS_TIMEOUT) ? + "slave random stretch time timeout\n" : + "Master aborted read transaction\n"); + recover = true; + } + } + } + + /* RX_EVENT is not valid when START_BUSY is set */ + if ((status & BIT(IS_S_RX_EVENT_SHIFT)) && + (status & BIT(IS_S_START_BUSY_SHIFT))) { + dev_warn(iproc_i2c->device, "Slave aborted read transaction\n"); + recover = true; + } + + if (recover) { + /* re-initialize i2c for recovery */ + bcm_iproc_i2c_enable_disable(iproc_i2c, false); + bcm_iproc_i2c_slave_init(iproc_i2c, true); + bcm_iproc_i2c_enable_disable(iproc_i2c, true); + } + + return recover; +} + +static void bcm_iproc_i2c_slave_read(struct bcm_iproc_i2c_dev *iproc_i2c) +{ + u8 rx_data, rx_status; + u32 rx_bytes = 0; + u32 val; + + while (rx_bytes < MAX_SLAVE_RX_PER_INT) { + val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); + rx_status = (val >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK; + rx_data = ((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK); + + if (rx_status == I2C_SLAVE_RX_START) { + /* Start of SMBUS Master write */ + i2c_slave_event(iproc_i2c->slave, + I2C_SLAVE_WRITE_REQUESTED, &rx_data); + iproc_i2c->rx_start_rcvd = true; + iproc_i2c->slave_read_complete = false; + } else if (rx_status == I2C_SLAVE_RX_DATA && + iproc_i2c->rx_start_rcvd) { + /* Middle of SMBUS Master write */ + i2c_slave_event(iproc_i2c->slave, + I2C_SLAVE_WRITE_RECEIVED, &rx_data); + } else if (rx_status == I2C_SLAVE_RX_END && + iproc_i2c->rx_start_rcvd) { + /* End of SMBUS Master write */ + if (iproc_i2c->slave_rx_only) + i2c_slave_event(iproc_i2c->slave, + I2C_SLAVE_WRITE_RECEIVED, + &rx_data); + + i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, + &rx_data); + } else if (rx_status == I2C_SLAVE_RX_FIFO_EMPTY) { + iproc_i2c->rx_start_rcvd = false; + iproc_i2c->slave_read_complete = true; + break; + } + + rx_bytes++; + } +} + +static void slave_rx_tasklet_fn(unsigned long data) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = (struct bcm_iproc_i2c_dev *)data; + u32 int_clr; + + bcm_iproc_i2c_slave_read(iproc_i2c); + + /* clear pending IS_S_RX_EVENT_SHIFT interrupt */ + int_clr = BIT(IS_S_RX_EVENT_SHIFT); + + if (!iproc_i2c->slave_rx_only && iproc_i2c->slave_read_complete) { + /* + * In case of single byte master-read request, + * IS_S_TX_UNDERRUN_SHIFT event is generated before + * IS_S_START_BUSY_SHIFT event. Hence start slave data send + * from first IS_S_TX_UNDERRUN_SHIFT event. + * + * This means don't send any data from slave when + * IS_S_RD_EVENT_SHIFT event is generated else it will increment + * eeprom or other backend slave driver read pointer twice. + */ + iproc_i2c->tx_underrun = 0; + iproc_i2c->slave_int_mask |= BIT(IE_S_TX_UNDERRUN_SHIFT); + + /* clear IS_S_RD_EVENT_SHIFT interrupt */ + int_clr |= BIT(IS_S_RD_EVENT_SHIFT); + } + + /* clear slave interrupt */ + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, int_clr); + /* enable slave interrupts */ + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, iproc_i2c->slave_int_mask); +} + +static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c, + u32 status) +{ + u32 val; + u8 value; + + + if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) { + iproc_i2c->tx_underrun++; + if (iproc_i2c->tx_underrun == 1) + /* Start of SMBUS for Master Read */ + i2c_slave_event(iproc_i2c->slave, + I2C_SLAVE_READ_REQUESTED, + &value); + else + /* Master read other than start */ + i2c_slave_event(iproc_i2c->slave, + I2C_SLAVE_READ_PROCESSED, + &value); + + iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value); + /* start transfer */ + val = BIT(S_CMD_START_BUSY_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); + + /* clear interrupt */ + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, + BIT(IS_S_TX_UNDERRUN_SHIFT)); + } + + /* Stop received from master in case of master read transaction */ + if (status & BIT(IS_S_START_BUSY_SHIFT)) { + /* + * Disable interrupt for TX FIFO becomes empty and + * less than PKT_LENGTH bytes were output on the SMBUS + */ + iproc_i2c->slave_int_mask &= ~BIT(IE_S_TX_UNDERRUN_SHIFT); + val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + val &= ~BIT(IE_S_TX_UNDERRUN_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); + + /* End of SMBUS for Master Read */ + val = BIT(S_TX_WR_STATUS_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, val); + + val = BIT(S_CMD_START_BUSY_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); + + /* flush TX FIFOs */ + val = iproc_i2c_rd_reg(iproc_i2c, S_FIFO_CTRL_OFFSET); + val |= (BIT(S_FIFO_TX_FLUSH_SHIFT)); + iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val); + + i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, &value); + + /* clear interrupt */ + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, + BIT(IS_S_START_BUSY_SHIFT)); + } + + /* if the controller has been reset, immediately return from the ISR */ + if (bcm_iproc_i2c_check_slave_status(iproc_i2c, status)) + return true; + + /* + * Slave events in case of master-write, master-write-read and, + * master-read + * + * Master-write : only IS_S_RX_EVENT_SHIFT event + * Master-write-read: both IS_S_RX_EVENT_SHIFT and IS_S_RD_EVENT_SHIFT + * events + * Master-read : both IS_S_RX_EVENT_SHIFT and IS_S_RD_EVENT_SHIFT + * events or only IS_S_RD_EVENT_SHIFT + * + * iproc has a slave rx fifo size of 64 bytes. Rx fifo full interrupt + * (IS_S_RX_FIFO_FULL_SHIFT) will be generated when RX fifo becomes + * full. This can happen if Master issues write requests of more than + * 64 bytes. + */ + if (status & BIT(IS_S_RX_EVENT_SHIFT) || + status & BIT(IS_S_RD_EVENT_SHIFT) || + status & BIT(IS_S_RX_FIFO_FULL_SHIFT)) { + /* disable slave interrupts */ + val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + val &= ~iproc_i2c->slave_int_mask; + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); + + if (status & BIT(IS_S_RD_EVENT_SHIFT)) + /* Master-write-read request */ + iproc_i2c->slave_rx_only = false; + else + /* Master-write request only */ + iproc_i2c->slave_rx_only = true; + + /* schedule tasklet to read data later */ + tasklet_schedule(&iproc_i2c->slave_rx_tasklet); + + /* clear IS_S_RX_FIFO_FULL_SHIFT interrupt */ + if (status & BIT(IS_S_RX_FIFO_FULL_SHIFT)) { + val = BIT(IS_S_RX_FIFO_FULL_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, val); + } + } + + return true; +} + +static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c) +{ + struct i2c_msg *msg = iproc_i2c->msg; + uint32_t val; + + /* Read valid data from RX FIFO */ + while (iproc_i2c->rx_bytes < msg->len) { + val = iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET); + + /* rx fifo empty */ + if (!((val >> M_RX_STATUS_SHIFT) & M_RX_STATUS_MASK)) + break; + + msg->buf[iproc_i2c->rx_bytes] = + (val >> M_RX_DATA_SHIFT) & M_RX_DATA_MASK; + iproc_i2c->rx_bytes++; + } +} + +static void bcm_iproc_i2c_send(struct bcm_iproc_i2c_dev *iproc_i2c) +{ + struct i2c_msg *msg = iproc_i2c->msg; + unsigned int tx_bytes = msg->len - iproc_i2c->tx_bytes; + unsigned int i; + u32 val; + + /* can only fill up to the FIFO size */ + tx_bytes = min_t(unsigned int, tx_bytes, M_TX_RX_FIFO_SIZE); + for (i = 0; i < tx_bytes; i++) { + /* start from where we left over */ + unsigned int idx = iproc_i2c->tx_bytes + i; + + val = msg->buf[idx]; + + /* mark the last byte */ + if (idx == msg->len - 1) { + val |= BIT(M_TX_WR_STATUS_SHIFT); + + if (iproc_i2c->irq) { + u32 tmp; + + /* + * Since this is the last byte, we should now + * disable TX FIFO underrun interrupt + */ + tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, + tmp); + } + } + + /* load data into TX FIFO */ + iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); + } + + /* update number of transferred bytes */ + iproc_i2c->tx_bytes += tx_bytes; +} + +static void bcm_iproc_i2c_read(struct bcm_iproc_i2c_dev *iproc_i2c) +{ + struct i2c_msg *msg = iproc_i2c->msg; + u32 bytes_left, val; + + bcm_iproc_i2c_read_valid_bytes(iproc_i2c); + bytes_left = msg->len - iproc_i2c->rx_bytes; + if (bytes_left == 0) { + if (iproc_i2c->irq) { + /* finished reading all data, disable rx thld event */ + val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + val &= ~BIT(IS_M_RX_THLD_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); + } + } else if (bytes_left < iproc_i2c->thld_bytes) { + /* set bytes left as threshold */ + val = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET); + val &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT); + val |= (bytes_left << M_FIFO_RX_THLD_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); + iproc_i2c->thld_bytes = bytes_left; + } + /* + * bytes_left >= iproc_i2c->thld_bytes, + * hence no need to change the THRESHOLD SET. + * It will remain as iproc_i2c->thld_bytes itself + */ +} + +static void bcm_iproc_i2c_process_m_event(struct bcm_iproc_i2c_dev *iproc_i2c, + u32 status) +{ + /* TX FIFO is empty and we have more data to send */ + if (status & BIT(IS_M_TX_UNDERRUN_SHIFT)) + bcm_iproc_i2c_send(iproc_i2c); + + /* RX FIFO threshold is reached and data needs to be read out */ + if (status & BIT(IS_M_RX_THLD_SHIFT)) + bcm_iproc_i2c_read(iproc_i2c); + + /* transfer is done */ + if (status & BIT(IS_M_START_BUSY_SHIFT)) { + iproc_i2c->xfer_is_done = 1; + if (iproc_i2c->irq) + complete(&iproc_i2c->done); + } +} + +static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = data; + u32 slave_status; + u32 status; + bool ret; + + status = iproc_i2c_rd_reg(iproc_i2c, IS_OFFSET); + /* process only slave interrupt which are enabled */ + slave_status = status & iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET) & + ISR_MASK_SLAVE; + + if (slave_status) { + ret = bcm_iproc_i2c_slave_isr(iproc_i2c, slave_status); + if (ret) + return IRQ_HANDLED; + else + return IRQ_NONE; + } + + status &= ISR_MASK; + if (!status) + return IRQ_NONE; + + /* process all master based events */ + bcm_iproc_i2c_process_m_event(iproc_i2c, status); + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); + + return IRQ_HANDLED; +} + +static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c) +{ + u32 val; + + /* put controller in reset */ + val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); + val |= BIT(CFG_RESET_SHIFT); + val &= ~(BIT(CFG_EN_SHIFT)); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); + + /* wait 100 usec per spec */ + udelay(100); + + /* bring controller out of reset */ + val &= ~(BIT(CFG_RESET_SHIFT)); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); + + /* flush TX/RX FIFOs and set RX FIFO threshold to zero */ + val = (BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT)); + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); + /* disable all interrupts */ + val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + val &= ~(IE_M_ALL_INTERRUPT_MASK << + IE_M_ALL_INTERRUPT_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); + + /* clear all pending interrupts */ + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 0xffffffff); + + return 0; +} + +static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, + bool enable) +{ + u32 val; + + val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); + if (enable) + val |= BIT(CFG_EN_SHIFT); + else + val &= ~BIT(CFG_EN_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); +} + +static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c, + struct i2c_msg *msg) +{ + u32 val; + + val = iproc_i2c_rd_reg(iproc_i2c, M_CMD_OFFSET); + val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK; + + switch (val) { + case M_CMD_STATUS_SUCCESS: + return 0; + + case M_CMD_STATUS_LOST_ARB: + dev_dbg(iproc_i2c->device, "lost bus arbitration\n"); + return -EAGAIN; + + case M_CMD_STATUS_NACK_ADDR: + dev_dbg(iproc_i2c->device, "NAK addr:0x%02x\n", msg->addr); + return -ENXIO; + + case M_CMD_STATUS_NACK_DATA: + dev_dbg(iproc_i2c->device, "NAK data\n"); + return -ENXIO; + + case M_CMD_STATUS_TIMEOUT: + dev_dbg(iproc_i2c->device, "bus timeout\n"); + return -ETIMEDOUT; + + case M_CMD_STATUS_FIFO_UNDERRUN: + dev_dbg(iproc_i2c->device, "FIFO under-run\n"); + return -ENXIO; + + case M_CMD_STATUS_RX_FIFO_FULL: + dev_dbg(iproc_i2c->device, "RX FIFO full\n"); + return -ETIMEDOUT; + + default: + dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val); + + /* re-initialize i2c for recovery */ + bcm_iproc_i2c_enable_disable(iproc_i2c, false); + bcm_iproc_i2c_init(iproc_i2c); + bcm_iproc_i2c_enable_disable(iproc_i2c, true); + + return -EIO; + } +} + +static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, + struct i2c_msg *msg, + u32 cmd) +{ + unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MSEC); + u32 val, status; + int ret; + + iproc_i2c_wr_reg(iproc_i2c, M_CMD_OFFSET, cmd); + + if (iproc_i2c->irq) { + time_left = wait_for_completion_timeout(&iproc_i2c->done, + time_left); + /* disable all interrupts */ + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); + /* read it back to flush the write */ + iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + /* make sure the interrupt handler isn't running */ + synchronize_irq(iproc_i2c->irq); + + } else { /* polling mode */ + unsigned long timeout = jiffies + time_left; + + do { + status = iproc_i2c_rd_reg(iproc_i2c, + IS_OFFSET) & ISR_MASK; + bcm_iproc_i2c_process_m_event(iproc_i2c, status); + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); + + if (time_after(jiffies, timeout)) { + time_left = 0; + break; + } + + cpu_relax(); + cond_resched(); + } while (!iproc_i2c->xfer_is_done); + } + + if (!time_left && !iproc_i2c->xfer_is_done) { + dev_err(iproc_i2c->device, "transaction timed out\n"); + + /* flush both TX/RX FIFOs */ + val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); + return -ETIMEDOUT; + } + + ret = bcm_iproc_i2c_check_status(iproc_i2c, msg); + if (ret) { + /* flush both TX/RX FIFOs */ + val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); + return ret; + } + + return 0; +} + +/* + * If 'process_call' is true, then this is a multi-msg transfer that requires + * a repeated start between the messages. + * More specifically, it must be a write (reg) followed by a read (data). + * The i2c quirks are set to enforce this rule. + */ +static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c, + struct i2c_msg *msgs, bool process_call) +{ + int i; + u8 addr; + u32 val, tmp, val_intr_en; + unsigned int tx_bytes; + struct i2c_msg *msg = &msgs[0]; + + /* check if bus is busy */ + if (!!(iproc_i2c_rd_reg(iproc_i2c, + M_CMD_OFFSET) & BIT(M_CMD_START_BUSY_SHIFT))) { + dev_warn(iproc_i2c->device, "bus is busy\n"); + return -EBUSY; + } + + iproc_i2c->msg = msg; + + /* format and load slave address into the TX FIFO */ + addr = i2c_8bit_addr_from_msg(msg); + iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, addr); + + /* + * For a write transaction, load data into the TX FIFO. Only allow + * loading up to TX FIFO size - 1 bytes of data since the first byte + * has been used up by the slave address + */ + tx_bytes = min_t(unsigned int, msg->len, M_TX_RX_FIFO_SIZE - 1); + if (!(msg->flags & I2C_M_RD)) { + for (i = 0; i < tx_bytes; i++) { + val = msg->buf[i]; + + /* mark the last byte */ + if (!process_call && (i == msg->len - 1)) + val |= BIT(M_TX_WR_STATUS_SHIFT); + + iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); + } + iproc_i2c->tx_bytes = tx_bytes; + } + + /* Process the read message if this is process call */ + if (process_call) { + msg++; + iproc_i2c->msg = msg; /* point to second msg */ + + /* + * The last byte to be sent out should be a slave + * address with read operation + */ + addr = i2c_8bit_addr_from_msg(msg); + /* mark it the last byte out */ + val = addr | BIT(M_TX_WR_STATUS_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); + } + + /* mark as incomplete before starting the transaction */ + if (iproc_i2c->irq) + reinit_completion(&iproc_i2c->done); + + iproc_i2c->xfer_is_done = 0; + + /* + * Enable the "start busy" interrupt, which will be triggered after the + * transaction is done, i.e., the internal start_busy bit, transitions + * from 1 to 0. + */ + val_intr_en = BIT(IE_M_START_BUSY_SHIFT); + + /* + * If TX data size is larger than the TX FIFO, need to enable TX + * underrun interrupt, which will be triggerred when the TX FIFO is + * empty. When that happens we can then pump more data into the FIFO + */ + if (!process_call && !(msg->flags & I2C_M_RD) && + msg->len > iproc_i2c->tx_bytes) + val_intr_en |= BIT(IE_M_TX_UNDERRUN_SHIFT); + + /* + * Now we can activate the transfer. For a read operation, specify the + * number of bytes to read + */ + val = BIT(M_CMD_START_BUSY_SHIFT); + + if (msg->len == 0) { + /* SMBUS QUICK Command (Read/Write) */ + val |= (M_CMD_PROTOCOL_QUICK << M_CMD_PROTOCOL_SHIFT); + } else if (msg->flags & I2C_M_RD) { + u32 protocol; + + iproc_i2c->rx_bytes = 0; + if (msg->len > M_RX_FIFO_MAX_THLD_VALUE) + iproc_i2c->thld_bytes = M_RX_FIFO_THLD_VALUE; + else + iproc_i2c->thld_bytes = msg->len; + + /* set threshold value */ + tmp = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET); + tmp &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT); + tmp |= iproc_i2c->thld_bytes << M_FIFO_RX_THLD_SHIFT; + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, tmp); + + /* enable the RX threshold interrupt */ + val_intr_en |= BIT(IE_M_RX_THLD_SHIFT); + + protocol = process_call ? + M_CMD_PROTOCOL_PROCESS : M_CMD_PROTOCOL_BLK_RD; + + val |= (protocol << M_CMD_PROTOCOL_SHIFT) | + (msg->len << M_CMD_RD_CNT_SHIFT); + } else { + val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT); + } + + if (iproc_i2c->irq) + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val_intr_en); + + return bcm_iproc_i2c_xfer_wait(iproc_i2c, msg, val); +} + +static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg msgs[], int num) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter); + bool process_call = false; + int ret; + + if (num == 2) { + /* Repeated start, use process call */ + process_call = true; + if (msgs[1].flags & I2C_M_NOSTART) { + dev_err(iproc_i2c->device, "Invalid repeated start\n"); + return -EOPNOTSUPP; + } + } + + ret = bcm_iproc_i2c_xfer_internal(iproc_i2c, msgs, process_call); + if (ret) { + dev_dbg(iproc_i2c->device, "xfer failed\n"); + return ret; + } + + return num; +} + +static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap) +{ + u32 val; + + val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + + if (adap->algo->reg_slave) + val |= I2C_FUNC_SLAVE; + + return val; +} + +static struct i2c_algorithm bcm_iproc_algo = { + .master_xfer = bcm_iproc_i2c_xfer, + .functionality = bcm_iproc_i2c_functionality, + .reg_slave = bcm_iproc_i2c_reg_slave, + .unreg_slave = bcm_iproc_i2c_unreg_slave, +}; + +static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = { + .flags = I2C_AQ_COMB_WRITE_THEN_READ, + .max_comb_1st_msg_len = M_TX_RX_FIFO_SIZE, + .max_read_len = M_RX_MAX_READ_LEN, +}; + +static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c) +{ + unsigned int bus_speed; + u32 val; + int ret = of_property_read_u32(iproc_i2c->device->of_node, + "clock-frequency", &bus_speed); + if (ret < 0) { + dev_info(iproc_i2c->device, + "unable to interpret clock-frequency DT property\n"); + bus_speed = I2C_MAX_STANDARD_MODE_FREQ; + } + + if (bus_speed < I2C_MAX_STANDARD_MODE_FREQ) { + dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n", + bus_speed); + dev_err(iproc_i2c->device, + "valid speeds are 100khz and 400khz\n"); + return -EINVAL; + } else if (bus_speed < I2C_MAX_FAST_MODE_FREQ) { + bus_speed = I2C_MAX_STANDARD_MODE_FREQ; + } else { + bus_speed = I2C_MAX_FAST_MODE_FREQ; + } + + iproc_i2c->bus_speed = bus_speed; + val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); + val &= ~BIT(TIM_CFG_MODE_400_SHIFT); + val |= (bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT; + iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); + + dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed); + + return 0; +} + +static int bcm_iproc_i2c_probe(struct platform_device *pdev) +{ + int irq, ret = 0; + struct bcm_iproc_i2c_dev *iproc_i2c; + struct i2c_adapter *adap; + + iproc_i2c = devm_kzalloc(&pdev->dev, sizeof(*iproc_i2c), + GFP_KERNEL); + if (!iproc_i2c) + return -ENOMEM; + + platform_set_drvdata(pdev, iproc_i2c); + iproc_i2c->device = &pdev->dev; + iproc_i2c->type = + (enum bcm_iproc_i2c_type)of_device_get_match_data(&pdev->dev); + init_completion(&iproc_i2c->done); + + iproc_i2c->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(iproc_i2c->base)) + return PTR_ERR(iproc_i2c->base); + + if (iproc_i2c->type == IPROC_I2C_NIC) { + iproc_i2c->idm_base = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(iproc_i2c->idm_base)) + return PTR_ERR(iproc_i2c->idm_base); + + ret = of_property_read_u32(iproc_i2c->device->of_node, + "brcm,ape-hsls-addr-mask", + &iproc_i2c->ape_addr_mask); + if (ret < 0) { + dev_err(iproc_i2c->device, + "'brcm,ape-hsls-addr-mask' missing\n"); + return -EINVAL; + } + + spin_lock_init(&iproc_i2c->idm_lock); + + /* no slave support */ + bcm_iproc_algo.reg_slave = NULL; + bcm_iproc_algo.unreg_slave = NULL; + } + + ret = bcm_iproc_i2c_init(iproc_i2c); + if (ret) + return ret; + + ret = bcm_iproc_i2c_cfg_speed(iproc_i2c); + if (ret) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq > 0) { + ret = devm_request_irq(iproc_i2c->device, irq, + bcm_iproc_i2c_isr, 0, pdev->name, + iproc_i2c); + if (ret < 0) { + dev_err(iproc_i2c->device, + "unable to request irq %i\n", irq); + return ret; + } + + iproc_i2c->irq = irq; + } else { + dev_warn(iproc_i2c->device, + "no irq resource, falling back to poll mode\n"); + } + + bcm_iproc_i2c_enable_disable(iproc_i2c, true); + + adap = &iproc_i2c->adapter; + i2c_set_adapdata(adap, iproc_i2c); + snprintf(adap->name, sizeof(adap->name), + "Broadcom iProc (%s)", + of_node_full_name(iproc_i2c->device->of_node)); + adap->algo = &bcm_iproc_algo; + adap->quirks = &bcm_iproc_i2c_quirks; + adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; + + return i2c_add_adapter(adap); +} + +static void bcm_iproc_i2c_remove(struct platform_device *pdev) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev); + + if (iproc_i2c->irq) { + /* + * Make sure there's no pending interrupt when we remove the + * adapter + */ + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); + iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + synchronize_irq(iproc_i2c->irq); + } + + i2c_del_adapter(&iproc_i2c->adapter); + bcm_iproc_i2c_enable_disable(iproc_i2c, false); +} + +static int bcm_iproc_i2c_suspend(struct device *dev) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev); + + if (iproc_i2c->irq) { + /* + * Make sure there's no pending interrupt when we go into + * suspend + */ + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); + iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + synchronize_irq(iproc_i2c->irq); + } + + /* now disable the controller */ + bcm_iproc_i2c_enable_disable(iproc_i2c, false); + + return 0; +} + +static int bcm_iproc_i2c_resume(struct device *dev) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev); + int ret; + u32 val; + + /* + * Power domain could have been shut off completely in system deep + * sleep, so re-initialize the block here + */ + ret = bcm_iproc_i2c_init(iproc_i2c); + if (ret) + return ret; + + /* configure to the desired bus speed */ + val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); + val &= ~BIT(TIM_CFG_MODE_400_SHIFT); + val |= (iproc_i2c->bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT; + iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); + + bcm_iproc_i2c_enable_disable(iproc_i2c, true); + + return 0; +} + +static const struct dev_pm_ops bcm_iproc_i2c_pm_ops = { + .suspend_late = &bcm_iproc_i2c_suspend, + .resume_early = &bcm_iproc_i2c_resume +}; + +static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave) +{ + struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter); + + if (iproc_i2c->slave) + return -EBUSY; + + if (slave->flags & I2C_CLIENT_TEN) + return -EAFNOSUPPORT; + + iproc_i2c->slave = slave; + + tasklet_init(&iproc_i2c->slave_rx_tasklet, slave_rx_tasklet_fn, + (unsigned long)iproc_i2c); + + bcm_iproc_i2c_slave_init(iproc_i2c, false); + return 0; +} + +static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave) +{ + u32 tmp; + struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter); + + if (!iproc_i2c->slave) + return -EINVAL; + + disable_irq(iproc_i2c->irq); + + tasklet_kill(&iproc_i2c->slave_rx_tasklet); + + /* disable all slave interrupts */ + tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); + tmp &= ~(IE_S_ALL_INTERRUPT_MASK << + IE_S_ALL_INTERRUPT_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp); + + /* Erase the slave address programmed */ + tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET); + tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT); + iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp); + + /* flush TX/RX FIFOs */ + tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT)); + iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp); + + /* clear all pending slave interrupts */ + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE); + + iproc_i2c->slave = NULL; + + enable_irq(iproc_i2c->irq); + + return 0; +} + +static const struct of_device_id bcm_iproc_i2c_of_match[] = { + { + .compatible = "brcm,iproc-i2c", + .data = (int *)IPROC_I2C, + }, { + .compatible = "brcm,iproc-nic-i2c", + .data = (int *)IPROC_I2C_NIC, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, bcm_iproc_i2c_of_match); + +static struct platform_driver bcm_iproc_i2c_driver = { + .driver = { + .name = "bcm-iproc-i2c", + .of_match_table = bcm_iproc_i2c_of_match, + .pm = pm_sleep_ptr(&bcm_iproc_i2c_pm_ops), + }, + .probe = bcm_iproc_i2c_probe, + .remove_new = bcm_iproc_i2c_remove, +}; +module_platform_driver(bcm_iproc_i2c_driver); + +MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom iProc I2C Driver"); +MODULE_LICENSE("GPL v2"); |