diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-designware-core.h')
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-core.h | 403 |
1 files changed, 403 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h new file mode 100644 index 000000000..a7f6f3eaf --- /dev/null +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -0,0 +1,403 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Synopsys DesignWare I2C adapter driver. + * + * Based on the TI DAVINCI I2C adapter driver. + * + * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2007 MontaVista Software Inc. + * Copyright (C) 2009 Provigent Ltd. + */ + +#include <linux/bits.h> +#include <linux/compiler_types.h> +#include <linux/completion.h> +#include <linux/dev_printk.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/types.h> + +#define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \ + I2C_FUNC_SMBUS_BYTE | \ + I2C_FUNC_SMBUS_BYTE_DATA | \ + I2C_FUNC_SMBUS_WORD_DATA | \ + I2C_FUNC_SMBUS_BLOCK_DATA | \ + I2C_FUNC_SMBUS_I2C_BLOCK) + +#define DW_IC_CON_MASTER BIT(0) +#define DW_IC_CON_SPEED_STD (1 << 1) +#define DW_IC_CON_SPEED_FAST (2 << 1) +#define DW_IC_CON_SPEED_HIGH (3 << 1) +#define DW_IC_CON_SPEED_MASK GENMASK(2, 1) +#define DW_IC_CON_10BITADDR_SLAVE BIT(3) +#define DW_IC_CON_10BITADDR_MASTER BIT(4) +#define DW_IC_CON_RESTART_EN BIT(5) +#define DW_IC_CON_SLAVE_DISABLE BIT(6) +#define DW_IC_CON_STOP_DET_IFADDRESSED BIT(7) +#define DW_IC_CON_TX_EMPTY_CTRL BIT(8) +#define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL BIT(9) +#define DW_IC_CON_BUS_CLEAR_CTRL BIT(11) + +#define DW_IC_DATA_CMD_DAT GENMASK(7, 0) +#define DW_IC_DATA_CMD_FIRST_DATA_BYTE BIT(11) + +/* + * Registers offset + */ +#define DW_IC_CON 0x00 +#define DW_IC_TAR 0x04 +#define DW_IC_SAR 0x08 +#define DW_IC_DATA_CMD 0x10 +#define DW_IC_SS_SCL_HCNT 0x14 +#define DW_IC_SS_SCL_LCNT 0x18 +#define DW_IC_FS_SCL_HCNT 0x1c +#define DW_IC_FS_SCL_LCNT 0x20 +#define DW_IC_HS_SCL_HCNT 0x24 +#define DW_IC_HS_SCL_LCNT 0x28 +#define DW_IC_INTR_STAT 0x2c +#define DW_IC_INTR_MASK 0x30 +#define DW_IC_RAW_INTR_STAT 0x34 +#define DW_IC_RX_TL 0x38 +#define DW_IC_TX_TL 0x3c +#define DW_IC_CLR_INTR 0x40 +#define DW_IC_CLR_RX_UNDER 0x44 +#define DW_IC_CLR_RX_OVER 0x48 +#define DW_IC_CLR_TX_OVER 0x4c +#define DW_IC_CLR_RD_REQ 0x50 +#define DW_IC_CLR_TX_ABRT 0x54 +#define DW_IC_CLR_RX_DONE 0x58 +#define DW_IC_CLR_ACTIVITY 0x5c +#define DW_IC_CLR_STOP_DET 0x60 +#define DW_IC_CLR_START_DET 0x64 +#define DW_IC_CLR_GEN_CALL 0x68 +#define DW_IC_ENABLE 0x6c +#define DW_IC_STATUS 0x70 +#define DW_IC_TXFLR 0x74 +#define DW_IC_RXFLR 0x78 +#define DW_IC_SDA_HOLD 0x7c +#define DW_IC_TX_ABRT_SOURCE 0x80 +#define DW_IC_ENABLE_STATUS 0x9c +#define DW_IC_CLR_RESTART_DET 0xa8 +#define DW_IC_COMP_PARAM_1 0xf4 +#define DW_IC_COMP_VERSION 0xf8 +#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A /* "111*" == v1.11* */ +#define DW_IC_COMP_TYPE 0xfc +#define DW_IC_COMP_TYPE_VALUE 0x44570140 /* "DW" + 0x0140 */ + +#define DW_IC_INTR_RX_UNDER BIT(0) +#define DW_IC_INTR_RX_OVER BIT(1) +#define DW_IC_INTR_RX_FULL BIT(2) +#define DW_IC_INTR_TX_OVER BIT(3) +#define DW_IC_INTR_TX_EMPTY BIT(4) +#define DW_IC_INTR_RD_REQ BIT(5) +#define DW_IC_INTR_TX_ABRT BIT(6) +#define DW_IC_INTR_RX_DONE BIT(7) +#define DW_IC_INTR_ACTIVITY BIT(8) +#define DW_IC_INTR_STOP_DET BIT(9) +#define DW_IC_INTR_START_DET BIT(10) +#define DW_IC_INTR_GEN_CALL BIT(11) +#define DW_IC_INTR_RESTART_DET BIT(12) +#define DW_IC_INTR_MST_ON_HOLD BIT(13) + +#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ + DW_IC_INTR_TX_ABRT | \ + DW_IC_INTR_STOP_DET) +#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ + DW_IC_INTR_TX_EMPTY) +#define DW_IC_INTR_SLAVE_MASK (DW_IC_INTR_DEFAULT_MASK | \ + DW_IC_INTR_RX_UNDER | \ + DW_IC_INTR_RD_REQ) + +#define DW_IC_ENABLE_ABORT BIT(1) + +#define DW_IC_STATUS_ACTIVITY BIT(0) +#define DW_IC_STATUS_TFE BIT(2) +#define DW_IC_STATUS_RFNE BIT(3) +#define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) +#define DW_IC_STATUS_SLAVE_ACTIVITY BIT(6) + +#define DW_IC_SDA_HOLD_RX_SHIFT 16 +#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, 16) + +#define DW_IC_ERR_TX_ABRT 0x1 + +#define DW_IC_TAR_10BITADDR_MASTER BIT(12) + +#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3)) +#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) + +/* + * Sofware status flags + */ +#define STATUS_ACTIVE BIT(0) +#define STATUS_WRITE_IN_PROGRESS BIT(1) +#define STATUS_READ_IN_PROGRESS BIT(2) +#define STATUS_MASK GENMASK(2, 0) + +/* + * operation modes + */ +#define DW_IC_MASTER 0 +#define DW_IC_SLAVE 1 + +/* + * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register + * + * Only expected abort codes are listed here + * refer to the datasheet for the full list + */ +#define ABRT_7B_ADDR_NOACK 0 +#define ABRT_10ADDR1_NOACK 1 +#define ABRT_10ADDR2_NOACK 2 +#define ABRT_TXDATA_NOACK 3 +#define ABRT_GCALL_NOACK 4 +#define ABRT_GCALL_READ 5 +#define ABRT_SBYTE_ACKDET 7 +#define ABRT_SBYTE_NORSTRT 9 +#define ABRT_10B_RD_NORSTRT 10 +#define ABRT_MASTER_DIS 11 +#define ARB_LOST 12 +#define ABRT_SLAVE_FLUSH_TXFIFO 13 +#define ABRT_SLAVE_ARBLOST 14 +#define ABRT_SLAVE_RD_INTX 15 + +#define DW_IC_TX_ABRT_7B_ADDR_NOACK BIT(ABRT_7B_ADDR_NOACK) +#define DW_IC_TX_ABRT_10ADDR1_NOACK BIT(ABRT_10ADDR1_NOACK) +#define DW_IC_TX_ABRT_10ADDR2_NOACK BIT(ABRT_10ADDR2_NOACK) +#define DW_IC_TX_ABRT_TXDATA_NOACK BIT(ABRT_TXDATA_NOACK) +#define DW_IC_TX_ABRT_GCALL_NOACK BIT(ABRT_GCALL_NOACK) +#define DW_IC_TX_ABRT_GCALL_READ BIT(ABRT_GCALL_READ) +#define DW_IC_TX_ABRT_SBYTE_ACKDET BIT(ABRT_SBYTE_ACKDET) +#define DW_IC_TX_ABRT_SBYTE_NORSTRT BIT(ABRT_SBYTE_NORSTRT) +#define DW_IC_TX_ABRT_10B_RD_NORSTRT BIT(ABRT_10B_RD_NORSTRT) +#define DW_IC_TX_ABRT_MASTER_DIS BIT(ABRT_MASTER_DIS) +#define DW_IC_TX_ARB_LOST BIT(ARB_LOST) +#define DW_IC_RX_ABRT_SLAVE_RD_INTX BIT(ABRT_SLAVE_RD_INTX) +#define DW_IC_RX_ABRT_SLAVE_ARBLOST BIT(ABRT_SLAVE_ARBLOST) +#define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO BIT(ABRT_SLAVE_FLUSH_TXFIFO) + +#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ + DW_IC_TX_ABRT_10ADDR1_NOACK | \ + DW_IC_TX_ABRT_10ADDR2_NOACK | \ + DW_IC_TX_ABRT_TXDATA_NOACK | \ + DW_IC_TX_ABRT_GCALL_NOACK) + +struct clk; +struct device; +struct reset_control; + +/** + * struct dw_i2c_dev - private i2c-designware data + * @dev: driver model device node + * @map: IO registers map + * @sysmap: System controller registers map + * @base: IO registers pointer + * @ext: Extended IO registers pointer + * @cmd_complete: tx completion indicator + * @clk: input reference clock + * @pclk: clock required to access the registers + * @rst: optional reset for the controller + * @slave: represent an I2C slave device + * @get_clk_rate_khz: callback to retrieve IP specific bus speed + * @cmd_err: run time hadware error code + * @msgs: points to an array of messages currently being transferred + * @msgs_num: the number of elements in msgs + * @msg_write_idx: the element index of the current tx message in the msgs array + * @tx_buf_len: the length of the current tx buffer + * @tx_buf: the current tx buffer + * @msg_read_idx: the element index of the current rx message in the msgs array + * @rx_buf_len: the length of the current rx buffer + * @rx_buf: the current rx buffer + * @msg_err: error status of the current transfer + * @status: i2c master status, one of STATUS_* + * @abort_source: copy of the TX_ABRT_SOURCE register + * @irq: interrupt number for the i2c master + * @flags: platform specific flags like type of IO accessors or model + * @adapter: i2c subsystem adapter node + * @functionality: I2C_FUNC_* ORed bits to reflect what controller does support + * @master_cfg: configuration for the master device + * @slave_cfg: configuration for the slave device + * @tx_fifo_depth: depth of the hardware tx fifo + * @rx_fifo_depth: depth of the hardware rx fifo + * @rx_outstanding: current master-rx elements in tx fifo + * @timings: bus clock frequency, SDA hold and other timings + * @sda_hold_time: SDA hold value + * @ss_hcnt: standard speed HCNT value + * @ss_lcnt: standard speed LCNT value + * @fs_hcnt: fast speed HCNT value + * @fs_lcnt: fast speed LCNT value + * @fp_hcnt: fast plus HCNT value + * @fp_lcnt: fast plus LCNT value + * @hs_hcnt: high speed HCNT value + * @hs_lcnt: high speed LCNT value + * @acquire_lock: function to acquire a hardware lock on the bus + * @release_lock: function to release a hardware lock on the bus + * @semaphore_idx: Index of table with semaphore type attached to the bus. It's + * -1 if there is no semaphore. + * @shared_with_punit: true if this bus is shared with the SoCs PUNIT + * @disable: function to disable the controller + * @init: function to initialize the I2C hardware + * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing + * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE + * @rinfo: I²C GPIO recovery information + * + * HCNT and LCNT parameters can be used if the platform knows more accurate + * values than the one computed based only on the input clock frequency. + * Leave them to be %0 if not used. + */ +struct dw_i2c_dev { + struct device *dev; + struct regmap *map; + struct regmap *sysmap; + void __iomem *base; + void __iomem *ext; + struct completion cmd_complete; + struct clk *clk; + struct clk *pclk; + struct reset_control *rst; + struct i2c_client *slave; + u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev); + int cmd_err; + struct i2c_msg *msgs; + int msgs_num; + int msg_write_idx; + u32 tx_buf_len; + u8 *tx_buf; + int msg_read_idx; + u32 rx_buf_len; + u8 *rx_buf; + int msg_err; + unsigned int status; + unsigned int abort_source; + int irq; + u32 flags; + struct i2c_adapter adapter; + u32 functionality; + u32 master_cfg; + u32 slave_cfg; + unsigned int tx_fifo_depth; + unsigned int rx_fifo_depth; + int rx_outstanding; + struct i2c_timings timings; + u32 sda_hold_time; + u16 ss_hcnt; + u16 ss_lcnt; + u16 fs_hcnt; + u16 fs_lcnt; + u16 fp_hcnt; + u16 fp_lcnt; + u16 hs_hcnt; + u16 hs_lcnt; + int (*acquire_lock)(void); + void (*release_lock)(void); + int semaphore_idx; + bool shared_with_punit; + void (*disable)(struct dw_i2c_dev *dev); + int (*init)(struct dw_i2c_dev *dev); + int (*set_sda_hold_time)(struct dw_i2c_dev *dev); + int mode; + struct i2c_bus_recovery_info rinfo; +}; + +#define ACCESS_INTR_MASK BIT(0) +#define ACCESS_NO_IRQ_SUSPEND BIT(1) +#define ARBITRATION_SEMAPHORE BIT(2) + +#define MODEL_MSCC_OCELOT BIT(8) +#define MODEL_BAIKAL_BT1 BIT(9) +#define MODEL_AMD_NAVI_GPU BIT(10) +#define MODEL_WANGXUN_SP BIT(11) +#define MODEL_MASK GENMASK(11, 8) + +/* + * Enable UCSI interrupt by writing 0xd at register + * offset 0x474 specified in hardware specification. + */ +#define AMD_UCSI_INTR_REG 0x474 +#define AMD_UCSI_INTR_EN 0xd + +#define TXGBE_TX_FIFO_DEPTH 4 +#define TXGBE_RX_FIFO_DEPTH 0 + +struct i2c_dw_semaphore_callbacks { + int (*probe)(struct dw_i2c_dev *dev); + void (*remove)(struct dw_i2c_dev *dev); +}; + +int i2c_dw_init_regmap(struct dw_i2c_dev *dev); +u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset); +u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset); +int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev); +u32 i2c_dw_clk_rate(struct dw_i2c_dev *dev); +int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare); +int i2c_dw_acquire_lock(struct dw_i2c_dev *dev); +void i2c_dw_release_lock(struct dw_i2c_dev *dev); +int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev); +int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); +int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev); +u32 i2c_dw_func(struct i2c_adapter *adap); +void i2c_dw_disable(struct dw_i2c_dev *dev); + +static inline void __i2c_dw_enable(struct dw_i2c_dev *dev) +{ + dev->status |= STATUS_ACTIVE; + regmap_write(dev->map, DW_IC_ENABLE, 1); +} + +static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev) +{ + regmap_write(dev->map, DW_IC_ENABLE, 0); + dev->status &= ~STATUS_ACTIVE; +} + +void __i2c_dw_disable(struct dw_i2c_dev *dev); + +extern void i2c_dw_configure_master(struct dw_i2c_dev *dev); +extern int i2c_dw_probe_master(struct dw_i2c_dev *dev); + +#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE) +extern void i2c_dw_configure_slave(struct dw_i2c_dev *dev); +extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev); +#else +static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { } +static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } +#endif + +static inline int i2c_dw_probe(struct dw_i2c_dev *dev) +{ + switch (dev->mode) { + case DW_IC_SLAVE: + return i2c_dw_probe_slave(dev); + case DW_IC_MASTER: + return i2c_dw_probe_master(dev); + default: + dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode); + return -EINVAL; + } +} + +static inline void i2c_dw_configure(struct dw_i2c_dev *dev) +{ + if (i2c_detect_slave_mode(dev->dev)) + i2c_dw_configure_slave(dev); + else + i2c_dw_configure_master(dev); +} + +#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) +int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev); +#endif + +#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_AMDPSP) +int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev); +#endif + +int i2c_dw_validate_speed(struct dw_i2c_dev *dev); +void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev); + +#if IS_ENABLED(CONFIG_ACPI) +int i2c_dw_acpi_configure(struct device *device); +#else +static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; } +#endif |