summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-designware-pcidrv.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-designware-pcidrv.c')
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c431
1 files changed, 431 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
new file mode 100644
index 000000000..61d7a27aa
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ * Copyright (C) 2011, 2015, 2016 Intel Corporation.
+ */
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "i2c-designware-core.h"
+#include "i2c-ccgx-ucsi.h"
+
+#define DRIVER_NAME "i2c-designware-pci"
+
+enum dw_pci_ctl_id_t {
+ medfield,
+ merrifield,
+ baytrail,
+ cherrytrail,
+ haswell,
+ elkhartlake,
+ navi_amd,
+};
+
+/*
+ * This is a legacy structure to describe the hardware counters
+ * to configure signal timings on the bus. For Device Tree platforms
+ * one should use the respective properties and for ACPI there is
+ * a set of ACPI methods that provide these counters. No new
+ * platform should use this structure.
+ */
+struct dw_scl_sda_cfg {
+ u16 ss_hcnt;
+ u16 fs_hcnt;
+ u16 ss_lcnt;
+ u16 fs_lcnt;
+ u32 sda_hold;
+};
+
+struct dw_pci_controller {
+ u32 bus_num;
+ u32 flags;
+ struct dw_scl_sda_cfg *scl_sda_cfg;
+ int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
+ u32 (*get_clk_rate_khz)(struct dw_i2c_dev *dev);
+};
+
+/* Merrifield HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg mrfld_config = {
+ .ss_hcnt = 0x2f8,
+ .fs_hcnt = 0x87,
+ .ss_lcnt = 0x37b,
+ .fs_lcnt = 0x10a,
+};
+
+/* BayTrail HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg byt_config = {
+ .ss_hcnt = 0x200,
+ .fs_hcnt = 0x55,
+ .ss_lcnt = 0x200,
+ .fs_lcnt = 0x99,
+ .sda_hold = 0x6,
+};
+
+/* Haswell HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg hsw_config = {
+ .ss_hcnt = 0x01b0,
+ .fs_hcnt = 0x48,
+ .ss_lcnt = 0x01fb,
+ .fs_lcnt = 0xa0,
+ .sda_hold = 0x9,
+};
+
+/* NAVI-AMD HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg navi_amd_config = {
+ .ss_hcnt = 0x1ae,
+ .ss_lcnt = 0x23a,
+ .sda_hold = 0x9,
+};
+
+static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+ return 25000;
+}
+
+static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+ struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
+
+ switch (pdev->device) {
+ case 0x0817:
+ dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+ fallthrough;
+ case 0x0818:
+ case 0x0819:
+ c->bus_num = pdev->device - 0x817 + 3;
+ return 0;
+ case 0x082C:
+ case 0x082D:
+ case 0x082E:
+ c->bus_num = pdev->device - 0x82C + 0;
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+ /*
+ * On Intel Merrifield the user visible i2c buses are enumerated
+ * [1..7]. So, we add 1 to shift the default range. Besides that the
+ * first PCI slot provides 4 functions, that's why we have to add 0 to
+ * the first slot and 4 to the next one.
+ */
+ switch (PCI_SLOT(pdev->devfn)) {
+ case 8:
+ c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1;
+ return 0;
+ case 9:
+ c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1;
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static u32 ehl_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+ return 100000;
+}
+
+static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+ return 100000;
+}
+
+static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+ struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
+
+ dev->flags |= MODEL_AMD_NAVI_GPU;
+ dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+ return 0;
+}
+
+static struct dw_pci_controller dw_pci_controllers[] = {
+ [medfield] = {
+ .bus_num = -1,
+ .setup = mfld_setup,
+ .get_clk_rate_khz = mfld_get_clk_rate_khz,
+ },
+ [merrifield] = {
+ .bus_num = -1,
+ .scl_sda_cfg = &mrfld_config,
+ .setup = mrfld_setup,
+ },
+ [baytrail] = {
+ .bus_num = -1,
+ .scl_sda_cfg = &byt_config,
+ },
+ [haswell] = {
+ .bus_num = -1,
+ .scl_sda_cfg = &hsw_config,
+ },
+ [cherrytrail] = {
+ .bus_num = -1,
+ .scl_sda_cfg = &byt_config,
+ },
+ [elkhartlake] = {
+ .bus_num = -1,
+ .get_clk_rate_khz = ehl_get_clk_rate_khz,
+ },
+ [navi_amd] = {
+ .bus_num = -1,
+ .scl_sda_cfg = &navi_amd_config,
+ .setup = navi_amd_setup,
+ .get_clk_rate_khz = navi_amd_get_clk_rate_khz,
+ },
+};
+
+static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev)
+{
+ struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+ i_dev->disable(i_dev);
+ return 0;
+}
+
+static int __maybe_unused i2c_dw_pci_suspend(struct device *dev)
+{
+ struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+ i2c_mark_adapter_suspended(&i_dev->adapter);
+
+ return i2c_dw_pci_runtime_suspend(dev);
+}
+
+static int __maybe_unused i2c_dw_pci_runtime_resume(struct device *dev)
+{
+ struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+ return i_dev->init(i_dev);
+}
+
+static int __maybe_unused i2c_dw_pci_resume(struct device *dev)
+{
+ struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+ int ret;
+
+ ret = i2c_dw_pci_runtime_resume(dev);
+
+ i2c_mark_adapter_resumed(&i_dev->adapter);
+
+ return ret;
+}
+
+static const struct dev_pm_ops i2c_dw_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume)
+ SET_RUNTIME_PM_OPS(i2c_dw_pci_runtime_suspend, i2c_dw_pci_runtime_resume, NULL)
+};
+
+static const struct property_entry dgpu_properties[] = {
+ /* USB-C doesn't power the system */
+ PROPERTY_ENTRY_U8("scope", POWER_SUPPLY_SCOPE_DEVICE),
+ {}
+};
+
+static const struct software_node dgpu_node = {
+ .properties = dgpu_properties,
+};
+
+static int i2c_dw_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct dw_i2c_dev *dev;
+ struct i2c_adapter *adap;
+ int r;
+ struct dw_pci_controller *controller;
+ struct dw_scl_sda_cfg *cfg;
+ struct i2c_timings *t;
+
+ if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers))
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "Invalid driver data %ld\n",
+ id->driver_data);
+
+ controller = &dw_pci_controllers[id->driver_data];
+
+ r = pcim_enable_device(pdev);
+ if (r)
+ return dev_err_probe(&pdev->dev, r,
+ "Failed to enable I2C PCI device\n");
+
+ pci_set_master(pdev);
+
+ r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
+ if (r)
+ return dev_err_probe(&pdev->dev, r,
+ "I/O memory remapping failed\n");
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ r = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (r < 0)
+ return r;
+
+ dev->get_clk_rate_khz = controller->get_clk_rate_khz;
+ dev->base = pcim_iomap_table(pdev)[0];
+ dev->dev = &pdev->dev;
+ dev->irq = pci_irq_vector(pdev, 0);
+ dev->flags |= controller->flags;
+
+ t = &dev->timings;
+ i2c_parse_fw_timings(&pdev->dev, t, false);
+
+ pci_set_drvdata(pdev, dev);
+
+ if (controller->setup) {
+ r = controller->setup(pdev, controller);
+ if (r) {
+ pci_free_irq_vectors(pdev);
+ return r;
+ }
+ }
+
+ i2c_dw_adjust_bus_speed(dev);
+
+ if (has_acpi_companion(&pdev->dev))
+ i2c_dw_acpi_configure(&pdev->dev);
+
+ r = i2c_dw_validate_speed(dev);
+ if (r) {
+ pci_free_irq_vectors(pdev);
+ return r;
+ }
+
+ i2c_dw_configure(dev);
+
+ if (controller->scl_sda_cfg) {
+ cfg = controller->scl_sda_cfg;
+ dev->ss_hcnt = cfg->ss_hcnt;
+ dev->fs_hcnt = cfg->fs_hcnt;
+ dev->ss_lcnt = cfg->ss_lcnt;
+ dev->fs_lcnt = cfg->fs_lcnt;
+ dev->sda_hold_time = cfg->sda_hold;
+ }
+
+ adap = &dev->adapter;
+ adap->owner = THIS_MODULE;
+ adap->class = 0;
+ ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
+ adap->nr = controller->bus_num;
+
+ r = i2c_dw_probe(dev);
+ if (r) {
+ pci_free_irq_vectors(pdev);
+ return r;
+ }
+
+ if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
+ dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, &dgpu_node);
+ if (IS_ERR(dev->slave))
+ return dev_err_probe(dev->dev, PTR_ERR(dev->slave),
+ "register UCSI failed\n");
+ }
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+ pm_runtime_allow(&pdev->dev);
+
+ return 0;
+}
+
+static void i2c_dw_pci_remove(struct pci_dev *pdev)
+{
+ struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
+
+ dev->disable(dev);
+ pm_runtime_forbid(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+
+ i2c_del_adapter(&dev->adapter);
+ devm_free_irq(&pdev->dev, dev->irq, dev);
+ pci_free_irq_vectors(pdev);
+}
+
+static const struct pci_device_id i2_designware_pci_ids[] = {
+ /* Medfield */
+ { PCI_VDEVICE(INTEL, 0x0817), medfield },
+ { PCI_VDEVICE(INTEL, 0x0818), medfield },
+ { PCI_VDEVICE(INTEL, 0x0819), medfield },
+ { PCI_VDEVICE(INTEL, 0x082C), medfield },
+ { PCI_VDEVICE(INTEL, 0x082D), medfield },
+ { PCI_VDEVICE(INTEL, 0x082E), medfield },
+ /* Merrifield */
+ { PCI_VDEVICE(INTEL, 0x1195), merrifield },
+ { PCI_VDEVICE(INTEL, 0x1196), merrifield },
+ /* Baytrail */
+ { PCI_VDEVICE(INTEL, 0x0F41), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F42), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F43), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F44), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F45), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F46), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F47), baytrail },
+ /* Haswell */
+ { PCI_VDEVICE(INTEL, 0x9c61), haswell },
+ { PCI_VDEVICE(INTEL, 0x9c62), haswell },
+ /* Braswell / Cherrytrail */
+ { PCI_VDEVICE(INTEL, 0x22C1), cherrytrail },
+ { PCI_VDEVICE(INTEL, 0x22C2), cherrytrail },
+ { PCI_VDEVICE(INTEL, 0x22C3), cherrytrail },
+ { PCI_VDEVICE(INTEL, 0x22C4), cherrytrail },
+ { PCI_VDEVICE(INTEL, 0x22C5), cherrytrail },
+ { PCI_VDEVICE(INTEL, 0x22C6), cherrytrail },
+ { PCI_VDEVICE(INTEL, 0x22C7), cherrytrail },
+ /* Elkhart Lake (PSE I2C) */
+ { PCI_VDEVICE(INTEL, 0x4bb9), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bba), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbb), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbc), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbd), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake },
+ /* AMD NAVI */
+ { PCI_VDEVICE(ATI, 0x7314), navi_amd },
+ { PCI_VDEVICE(ATI, 0x73a4), navi_amd },
+ { PCI_VDEVICE(ATI, 0x73e4), navi_amd },
+ { PCI_VDEVICE(ATI, 0x73c4), navi_amd },
+ { PCI_VDEVICE(ATI, 0x7444), navi_amd },
+ { PCI_VDEVICE(ATI, 0x7464), navi_amd },
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
+
+static struct pci_driver dw_i2c_driver = {
+ .name = DRIVER_NAME,
+ .id_table = i2_designware_pci_ids,
+ .probe = i2c_dw_pci_probe,
+ .remove = i2c_dw_pci_remove,
+ .driver = {
+ .pm = &i2c_dw_pm_ops,
+ },
+};
+module_pci_driver(dw_i2c_driver);
+
+/* Work with hotplug and coldplug */
+MODULE_ALIAS("i2c_designware-pci");
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
+MODULE_LICENSE("GPL");