summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-stm32f4.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-stm32f4.c')
-rw-r--r--drivers/i2c/busses/i2c-stm32f4.c891
1 files changed, 891 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
new file mode 100644
index 0000000000..ecc54792a6
--- /dev/null
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for STMicroelectronics STM32 I2C controller
+ *
+ * This I2C controller is described in the STM32F429/439 Soc reference manual.
+ * Please see below a link to the documentation:
+ * http://www.st.com/resource/en/reference_manual/DM00031020.pdf
+ *
+ * Copyright (C) M'boumba Cedric Madianga 2016
+ * Copyright (C) STMicroelectronics 2017
+ * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *
+ * This driver is based on i2c-st.c
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "i2c-stm32.h"
+
+/* STM32F4 I2C offset registers */
+#define STM32F4_I2C_CR1 0x00
+#define STM32F4_I2C_CR2 0x04
+#define STM32F4_I2C_DR 0x10
+#define STM32F4_I2C_SR1 0x14
+#define STM32F4_I2C_SR2 0x18
+#define STM32F4_I2C_CCR 0x1C
+#define STM32F4_I2C_TRISE 0x20
+#define STM32F4_I2C_FLTR 0x24
+
+/* STM32F4 I2C control 1*/
+#define STM32F4_I2C_CR1_POS BIT(11)
+#define STM32F4_I2C_CR1_ACK BIT(10)
+#define STM32F4_I2C_CR1_STOP BIT(9)
+#define STM32F4_I2C_CR1_START BIT(8)
+#define STM32F4_I2C_CR1_PE BIT(0)
+
+/* STM32F4 I2C control 2 */
+#define STM32F4_I2C_CR2_FREQ_MASK GENMASK(5, 0)
+#define STM32F4_I2C_CR2_FREQ(n) ((n) & STM32F4_I2C_CR2_FREQ_MASK)
+#define STM32F4_I2C_CR2_ITBUFEN BIT(10)
+#define STM32F4_I2C_CR2_ITEVTEN BIT(9)
+#define STM32F4_I2C_CR2_ITERREN BIT(8)
+#define STM32F4_I2C_CR2_IRQ_MASK (STM32F4_I2C_CR2_ITBUFEN | \
+ STM32F4_I2C_CR2_ITEVTEN | \
+ STM32F4_I2C_CR2_ITERREN)
+
+/* STM32F4 I2C Status 1 */
+#define STM32F4_I2C_SR1_AF BIT(10)
+#define STM32F4_I2C_SR1_ARLO BIT(9)
+#define STM32F4_I2C_SR1_BERR BIT(8)
+#define STM32F4_I2C_SR1_TXE BIT(7)
+#define STM32F4_I2C_SR1_RXNE BIT(6)
+#define STM32F4_I2C_SR1_BTF BIT(2)
+#define STM32F4_I2C_SR1_ADDR BIT(1)
+#define STM32F4_I2C_SR1_SB BIT(0)
+#define STM32F4_I2C_SR1_ITEVTEN_MASK (STM32F4_I2C_SR1_BTF | \
+ STM32F4_I2C_SR1_ADDR | \
+ STM32F4_I2C_SR1_SB)
+#define STM32F4_I2C_SR1_ITBUFEN_MASK (STM32F4_I2C_SR1_TXE | \
+ STM32F4_I2C_SR1_RXNE)
+#define STM32F4_I2C_SR1_ITERREN_MASK (STM32F4_I2C_SR1_AF | \
+ STM32F4_I2C_SR1_ARLO | \
+ STM32F4_I2C_SR1_BERR)
+
+/* STM32F4 I2C Status 2 */
+#define STM32F4_I2C_SR2_BUSY BIT(1)
+
+/* STM32F4 I2C Control Clock */
+#define STM32F4_I2C_CCR_CCR_MASK GENMASK(11, 0)
+#define STM32F4_I2C_CCR_CCR(n) ((n) & STM32F4_I2C_CCR_CCR_MASK)
+#define STM32F4_I2C_CCR_FS BIT(15)
+#define STM32F4_I2C_CCR_DUTY BIT(14)
+
+/* STM32F4 I2C Trise */
+#define STM32F4_I2C_TRISE_VALUE_MASK GENMASK(5, 0)
+#define STM32F4_I2C_TRISE_VALUE(n) ((n) & STM32F4_I2C_TRISE_VALUE_MASK)
+
+#define STM32F4_I2C_MIN_STANDARD_FREQ 2U
+#define STM32F4_I2C_MIN_FAST_FREQ 6U
+#define STM32F4_I2C_MAX_FREQ 46U
+#define HZ_TO_MHZ 1000000
+
+/**
+ * struct stm32f4_i2c_msg - client specific data
+ * @addr: 8-bit slave addr, including r/w bit
+ * @count: number of bytes to be transferred
+ * @buf: data buffer
+ * @result: result of the transfer
+ * @stop: last I2C msg to be sent, i.e. STOP to be generated
+ */
+struct stm32f4_i2c_msg {
+ u8 addr;
+ u32 count;
+ u8 *buf;
+ int result;
+ bool stop;
+};
+
+/**
+ * struct stm32f4_i2c_dev - private data of the controller
+ * @adap: I2C adapter for this controller
+ * @dev: device for this controller
+ * @base: virtual memory area
+ * @complete: completion of I2C message
+ * @clk: hw i2c clock
+ * @speed: I2C clock frequency of the controller. Standard or Fast are supported
+ * @parent_rate: I2C clock parent rate in MHz
+ * @msg: I2C transfer information
+ */
+struct stm32f4_i2c_dev {
+ struct i2c_adapter adap;
+ struct device *dev;
+ void __iomem *base;
+ struct completion complete;
+ struct clk *clk;
+ int speed;
+ int parent_rate;
+ struct stm32f4_i2c_msg msg;
+};
+
+static inline void stm32f4_i2c_set_bits(void __iomem *reg, u32 mask)
+{
+ writel_relaxed(readl_relaxed(reg) | mask, reg);
+}
+
+static inline void stm32f4_i2c_clr_bits(void __iomem *reg, u32 mask)
+{
+ writel_relaxed(readl_relaxed(reg) & ~mask, reg);
+}
+
+static void stm32f4_i2c_disable_irq(struct stm32f4_i2c_dev *i2c_dev)
+{
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_IRQ_MASK);
+}
+
+static int stm32f4_i2c_set_periph_clk_freq(struct stm32f4_i2c_dev *i2c_dev)
+{
+ u32 freq;
+ u32 cr2 = 0;
+
+ i2c_dev->parent_rate = clk_get_rate(i2c_dev->clk);
+ freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_TO_MHZ);
+
+ if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) {
+ /*
+ * To reach 100 kHz, the parent clk frequency should be between
+ * a minimum value of 2 MHz and a maximum value of 46 MHz due
+ * to hardware limitation
+ */
+ if (freq < STM32F4_I2C_MIN_STANDARD_FREQ ||
+ freq > STM32F4_I2C_MAX_FREQ) {
+ dev_err(i2c_dev->dev,
+ "bad parent clk freq for standard mode\n");
+ return -EINVAL;
+ }
+ } else {
+ /*
+ * To be as close as possible to 400 kHz, the parent clk
+ * frequency should be between a minimum value of 6 MHz and a
+ * maximum value of 46 MHz due to hardware limitation
+ */
+ if (freq < STM32F4_I2C_MIN_FAST_FREQ ||
+ freq > STM32F4_I2C_MAX_FREQ) {
+ dev_err(i2c_dev->dev,
+ "bad parent clk freq for fast mode\n");
+ return -EINVAL;
+ }
+ }
+
+ cr2 |= STM32F4_I2C_CR2_FREQ(freq);
+ writel_relaxed(cr2, i2c_dev->base + STM32F4_I2C_CR2);
+
+ return 0;
+}
+
+static void stm32f4_i2c_set_rise_time(struct stm32f4_i2c_dev *i2c_dev)
+{
+ u32 freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_TO_MHZ);
+ u32 trise;
+
+ /*
+ * These bits must be programmed with the maximum SCL rise time given in
+ * the I2C bus specification, incremented by 1.
+ *
+ * In standard mode, the maximum allowed SCL rise time is 1000 ns.
+ * If, in the I2C_CR2 register, the value of FREQ[5:0] bits is equal to
+ * 0x08 so period = 125 ns therefore the TRISE[5:0] bits must be
+ * programmed with 0x9. (1000 ns / 125 ns + 1)
+ * So, for I2C standard mode TRISE = FREQ[5:0] + 1
+ *
+ * In fast mode, the maximum allowed SCL rise time is 300 ns.
+ * If, in the I2C_CR2 register, the value of FREQ[5:0] bits is equal to
+ * 0x08 so period = 125 ns therefore the TRISE[5:0] bits must be
+ * programmed with 0x3. (300 ns / 125 ns + 1)
+ * So, for I2C fast mode TRISE = FREQ[5:0] * 300 / 1000 + 1
+ *
+ * Function stm32f4_i2c_set_periph_clk_freq made sure that parent rate
+ * is not higher than 46 MHz . As a result trise is at most 4 bits wide
+ * and so fits into the TRISE bits [5:0].
+ */
+ if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD)
+ trise = freq + 1;
+ else
+ trise = freq * 3 / 10 + 1;
+
+ writel_relaxed(STM32F4_I2C_TRISE_VALUE(trise),
+ i2c_dev->base + STM32F4_I2C_TRISE);
+}
+
+static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
+{
+ u32 val;
+ u32 ccr = 0;
+
+ if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) {
+ /*
+ * In standard mode:
+ * t_scl_high = t_scl_low = CCR * I2C parent clk period
+ * So to reach 100 kHz, we have:
+ * CCR = I2C parent rate / (100 kHz * 2)
+ *
+ * For example with parent rate = 2 MHz:
+ * CCR = 2000000 / (100000 * 2) = 10
+ * t_scl_high = t_scl_low = 10 * (1 / 2000000) = 5000 ns
+ * t_scl_high + t_scl_low = 10000 ns so 100 kHz is reached
+ *
+ * Function stm32f4_i2c_set_periph_clk_freq made sure that
+ * parent rate is not higher than 46 MHz . As a result val
+ * is at most 8 bits wide and so fits into the CCR bits [11:0].
+ */
+ val = i2c_dev->parent_rate / (I2C_MAX_STANDARD_MODE_FREQ * 2);
+ } else {
+ /*
+ * In fast mode, we compute CCR with duty = 0 as with low
+ * frequencies we are not able to reach 400 kHz.
+ * In that case:
+ * t_scl_high = CCR * I2C parent clk period
+ * t_scl_low = 2 * CCR * I2C parent clk period
+ * So, CCR = I2C parent rate / (400 kHz * 3)
+ *
+ * For example with parent rate = 6 MHz:
+ * CCR = 6000000 / (400000 * 3) = 5
+ * t_scl_high = 5 * (1 / 6000000) = 833 ns > 600 ns
+ * t_scl_low = 2 * 5 * (1 / 6000000) = 1667 ns > 1300 ns
+ * t_scl_high + t_scl_low = 2500 ns so 400 kHz is reached
+ *
+ * Function stm32f4_i2c_set_periph_clk_freq made sure that
+ * parent rate is not higher than 46 MHz . As a result val
+ * is at most 6 bits wide and so fits into the CCR bits [11:0].
+ */
+ val = DIV_ROUND_UP(i2c_dev->parent_rate, I2C_MAX_FAST_MODE_FREQ * 3);
+
+ /* Select Fast mode */
+ ccr |= STM32F4_I2C_CCR_FS;
+ }
+
+ ccr |= STM32F4_I2C_CCR_CCR(val);
+ writel_relaxed(ccr, i2c_dev->base + STM32F4_I2C_CCR);
+}
+
+/**
+ * stm32f4_i2c_hw_config() - Prepare I2C block
+ * @i2c_dev: Controller's private data
+ */
+static int stm32f4_i2c_hw_config(struct stm32f4_i2c_dev *i2c_dev)
+{
+ int ret;
+
+ ret = stm32f4_i2c_set_periph_clk_freq(i2c_dev);
+ if (ret)
+ return ret;
+
+ stm32f4_i2c_set_rise_time(i2c_dev);
+
+ stm32f4_i2c_set_speed_mode(i2c_dev);
+
+ /* Enable I2C */
+ writel_relaxed(STM32F4_I2C_CR1_PE, i2c_dev->base + STM32F4_I2C_CR1);
+
+ return 0;
+}
+
+static int stm32f4_i2c_wait_free_bus(struct stm32f4_i2c_dev *i2c_dev)
+{
+ u32 status;
+ int ret;
+
+ ret = readl_relaxed_poll_timeout(i2c_dev->base + STM32F4_I2C_SR2,
+ status,
+ !(status & STM32F4_I2C_SR2_BUSY),
+ 10, 1000);
+ if (ret) {
+ dev_dbg(i2c_dev->dev, "bus not free\n");
+ ret = -EBUSY;
+ }
+
+ return ret;
+}
+
+/**
+ * stm32f4_i2c_write_byte() - Write a byte in the data register
+ * @i2c_dev: Controller's private data
+ * @byte: Data to write in the register
+ */
+static void stm32f4_i2c_write_byte(struct stm32f4_i2c_dev *i2c_dev, u8 byte)
+{
+ writel_relaxed(byte, i2c_dev->base + STM32F4_I2C_DR);
+}
+
+/**
+ * stm32f4_i2c_write_msg() - Fill the data register in write mode
+ * @i2c_dev: Controller's private data
+ *
+ * This function fills the data register with I2C transfer buffer
+ */
+static void stm32f4_i2c_write_msg(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+
+ stm32f4_i2c_write_byte(i2c_dev, *msg->buf++);
+ msg->count--;
+}
+
+static void stm32f4_i2c_read_msg(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+ u32 rbuf;
+
+ rbuf = readl_relaxed(i2c_dev->base + STM32F4_I2C_DR);
+ *msg->buf++ = rbuf;
+ msg->count--;
+}
+
+static void stm32f4_i2c_terminate_xfer(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+ void __iomem *reg;
+
+ stm32f4_i2c_disable_irq(i2c_dev);
+
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ if (msg->stop)
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+ else
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+
+ complete(&i2c_dev->complete);
+}
+
+/**
+ * stm32f4_i2c_handle_write() - Handle FIFO empty interrupt in case of write
+ * @i2c_dev: Controller's private data
+ */
+static void stm32f4_i2c_handle_write(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+ if (msg->count) {
+ stm32f4_i2c_write_msg(i2c_dev);
+ if (!msg->count) {
+ /*
+ * Disable buffer interrupts for RX not empty and TX
+ * empty events
+ */
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN);
+ }
+ } else {
+ stm32f4_i2c_terminate_xfer(i2c_dev);
+ }
+}
+
+/**
+ * stm32f4_i2c_handle_read() - Handle FIFO empty interrupt in case of read
+ * @i2c_dev: Controller's private data
+ *
+ * This function is called when a new data is received in data register
+ */
+static void stm32f4_i2c_handle_read(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2;
+
+ switch (msg->count) {
+ case 1:
+ stm32f4_i2c_disable_irq(i2c_dev);
+ stm32f4_i2c_read_msg(i2c_dev);
+ complete(&i2c_dev->complete);
+ break;
+ /*
+ * For 2-byte reception, 3-byte reception and for Data N-2, N-1 and N
+ * for N-byte reception with N > 3, we do not have to read the data
+ * register when RX not empty event occurs as we have to wait for byte
+ * transferred finished event before reading data.
+ * So, here we just disable buffer interrupt in order to avoid another
+ * system preemption due to RX not empty event.
+ */
+ case 2:
+ case 3:
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN);
+ break;
+ /*
+ * For N byte reception with N > 3 we directly read data register
+ * until N-2 data.
+ */
+ default:
+ stm32f4_i2c_read_msg(i2c_dev);
+ }
+}
+
+/**
+ * stm32f4_i2c_handle_rx_done() - Handle byte transfer finished interrupt
+ * in case of read
+ * @i2c_dev: Controller's private data
+ *
+ * This function is called when a new data is received in the shift register
+ * but data register has not been read yet.
+ */
+static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+ void __iomem *reg;
+ u32 mask;
+ int i;
+
+ switch (msg->count) {
+ case 2:
+ /*
+ * In order to correctly send the Stop or Repeated Start
+ * condition on the I2C bus, the STOP/START bit has to be set
+ * before reading the last two bytes (data N-1 and N).
+ * After that, we could read the last two bytes, disable
+ * remaining interrupts and notify the end of xfer to the
+ * client
+ */
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ if (msg->stop)
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+ else
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+
+ for (i = 2; i > 0; i--)
+ stm32f4_i2c_read_msg(i2c_dev);
+
+ reg = i2c_dev->base + STM32F4_I2C_CR2;
+ mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN;
+ stm32f4_i2c_clr_bits(reg, mask);
+
+ complete(&i2c_dev->complete);
+ break;
+ case 3:
+ /*
+ * In order to correctly generate the NACK pulse after the last
+ * received data byte, we have to enable NACK before reading N-2
+ * data
+ */
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK);
+ stm32f4_i2c_read_msg(i2c_dev);
+ break;
+ default:
+ stm32f4_i2c_read_msg(i2c_dev);
+ }
+}
+
+/**
+ * stm32f4_i2c_handle_rx_addr() - Handle address matched interrupt in case of
+ * master receiver
+ * @i2c_dev: Controller's private data
+ */
+static void stm32f4_i2c_handle_rx_addr(struct stm32f4_i2c_dev *i2c_dev)
+{
+ struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+ u32 cr1;
+
+ switch (msg->count) {
+ case 0:
+ stm32f4_i2c_terminate_xfer(i2c_dev);
+
+ /* Clear ADDR flag */
+ readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+ break;
+ case 1:
+ /*
+ * Single byte reception:
+ * Enable NACK and reset POS (Acknowledge position).
+ * Then, clear ADDR flag and set STOP or RepSTART.
+ * In that way, the NACK and STOP or RepStart pulses will be
+ * sent as soon as the byte will be received in shift register
+ */
+ cr1 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR1);
+ cr1 &= ~(STM32F4_I2C_CR1_ACK | STM32F4_I2C_CR1_POS);
+ writel_relaxed(cr1, i2c_dev->base + STM32F4_I2C_CR1);
+
+ readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+
+ if (msg->stop)
+ cr1 |= STM32F4_I2C_CR1_STOP;
+ else
+ cr1 |= STM32F4_I2C_CR1_START;
+ writel_relaxed(cr1, i2c_dev->base + STM32F4_I2C_CR1);
+ break;
+ case 2:
+ /*
+ * 2-byte reception:
+ * Enable NACK, set POS (NACK position) and clear ADDR flag.
+ * In that way, NACK will be sent for the next byte which will
+ * be received in the shift register instead of the current
+ * one.
+ */
+ cr1 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR1);
+ cr1 &= ~STM32F4_I2C_CR1_ACK;
+ cr1 |= STM32F4_I2C_CR1_POS;
+ writel_relaxed(cr1, i2c_dev->base + STM32F4_I2C_CR1);
+
+ readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+ break;
+
+ default:
+ /*
+ * N-byte reception:
+ * Enable ACK, reset POS (ACK position) and clear ADDR flag.
+ * In that way, ACK will be sent as soon as the current byte
+ * will be received in the shift register
+ */
+ cr1 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR1);
+ cr1 |= STM32F4_I2C_CR1_ACK;
+ cr1 &= ~STM32F4_I2C_CR1_POS;
+ writel_relaxed(cr1, i2c_dev->base + STM32F4_I2C_CR1);
+
+ readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+ break;
+ }
+}
+
+/**
+ * stm32f4_i2c_isr_event() - Interrupt routine for I2C bus event
+ * @irq: interrupt number
+ * @data: Controller's private data
+ */
+static irqreturn_t stm32f4_i2c_isr_event(int irq, void *data)
+{
+ struct stm32f4_i2c_dev *i2c_dev = data;
+ struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+ u32 possible_status = STM32F4_I2C_SR1_ITEVTEN_MASK;
+ u32 status, ien, event, cr2;
+
+ cr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2);
+ ien = cr2 & STM32F4_I2C_CR2_IRQ_MASK;
+
+ /* Update possible_status if buffer interrupt is enabled */
+ if (ien & STM32F4_I2C_CR2_ITBUFEN)
+ possible_status |= STM32F4_I2C_SR1_ITBUFEN_MASK;
+
+ status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1);
+ event = status & possible_status;
+ if (!event) {
+ dev_dbg(i2c_dev->dev,
+ "spurious evt irq (status=0x%08x, ien=0x%08x)\n",
+ status, ien);
+ return IRQ_NONE;
+ }
+
+ /* Start condition generated */
+ if (event & STM32F4_I2C_SR1_SB)
+ stm32f4_i2c_write_byte(i2c_dev, msg->addr);
+
+ /* I2C Address sent */
+ if (event & STM32F4_I2C_SR1_ADDR) {
+ if (msg->addr & I2C_M_RD)
+ stm32f4_i2c_handle_rx_addr(i2c_dev);
+ else
+ readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2);
+
+ /*
+ * Enable buffer interrupts for RX not empty and TX empty
+ * events
+ */
+ cr2 |= STM32F4_I2C_CR2_ITBUFEN;
+ writel_relaxed(cr2, i2c_dev->base + STM32F4_I2C_CR2);
+ }
+
+ /* TX empty */
+ if ((event & STM32F4_I2C_SR1_TXE) && !(msg->addr & I2C_M_RD))
+ stm32f4_i2c_handle_write(i2c_dev);
+
+ /* RX not empty */
+ if ((event & STM32F4_I2C_SR1_RXNE) && (msg->addr & I2C_M_RD))
+ stm32f4_i2c_handle_read(i2c_dev);
+
+ /*
+ * The BTF (Byte Transfer finished) event occurs when:
+ * - in reception : a new byte is received in the shift register
+ * but the previous byte has not been read yet from data register
+ * - in transmission: a new byte should be sent but the data register
+ * has not been written yet
+ */
+ if (event & STM32F4_I2C_SR1_BTF) {
+ if (msg->addr & I2C_M_RD)
+ stm32f4_i2c_handle_rx_done(i2c_dev);
+ else
+ stm32f4_i2c_handle_write(i2c_dev);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * stm32f4_i2c_isr_error() - Interrupt routine for I2C bus error
+ * @irq: interrupt number
+ * @data: Controller's private data
+ */
+static irqreturn_t stm32f4_i2c_isr_error(int irq, void *data)
+{
+ struct stm32f4_i2c_dev *i2c_dev = data;
+ struct stm32f4_i2c_msg *msg = &i2c_dev->msg;
+ void __iomem *reg;
+ u32 status;
+
+ status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1);
+
+ /* Arbitration lost */
+ if (status & STM32F4_I2C_SR1_ARLO) {
+ status &= ~STM32F4_I2C_SR1_ARLO;
+ writel_relaxed(status, i2c_dev->base + STM32F4_I2C_SR1);
+ msg->result = -EAGAIN;
+ }
+
+ /*
+ * Acknowledge failure:
+ * In master transmitter mode a Stop must be generated by software
+ */
+ if (status & STM32F4_I2C_SR1_AF) {
+ if (!(msg->addr & I2C_M_RD)) {
+ reg = i2c_dev->base + STM32F4_I2C_CR1;
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP);
+ }
+ status &= ~STM32F4_I2C_SR1_AF;
+ writel_relaxed(status, i2c_dev->base + STM32F4_I2C_SR1);
+ msg->result = -EIO;
+ }
+
+ /* Bus error */
+ if (status & STM32F4_I2C_SR1_BERR) {
+ status &= ~STM32F4_I2C_SR1_BERR;
+ writel_relaxed(status, i2c_dev->base + STM32F4_I2C_SR1);
+ msg->result = -EIO;
+ }
+
+ stm32f4_i2c_disable_irq(i2c_dev);
+ complete(&i2c_dev->complete);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * stm32f4_i2c_xfer_msg() - Transfer a single I2C message
+ * @i2c_dev: Controller's private data
+ * @msg: I2C message to transfer
+ * @is_first: first message of the sequence
+ * @is_last: last message of the sequence
+ */
+static int stm32f4_i2c_xfer_msg(struct stm32f4_i2c_dev *i2c_dev,
+ struct i2c_msg *msg, bool is_first,
+ bool is_last)
+{
+ struct stm32f4_i2c_msg *f4_msg = &i2c_dev->msg;
+ void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1;
+ unsigned long timeout;
+ u32 mask;
+ int ret;
+
+ f4_msg->addr = i2c_8bit_addr_from_msg(msg);
+ f4_msg->buf = msg->buf;
+ f4_msg->count = msg->len;
+ f4_msg->result = 0;
+ f4_msg->stop = is_last;
+
+ reinit_completion(&i2c_dev->complete);
+
+ /* Enable events and errors interrupts */
+ mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN;
+ stm32f4_i2c_set_bits(i2c_dev->base + STM32F4_I2C_CR2, mask);
+
+ if (is_first) {
+ ret = stm32f4_i2c_wait_free_bus(i2c_dev);
+ if (ret)
+ return ret;
+
+ /* START generation */
+ stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
+ }
+
+ timeout = wait_for_completion_timeout(&i2c_dev->complete,
+ i2c_dev->adap.timeout);
+ ret = f4_msg->result;
+
+ if (!timeout)
+ ret = -ETIMEDOUT;
+
+ return ret;
+}
+
+/**
+ * stm32f4_i2c_xfer() - Transfer combined I2C message
+ * @i2c_adap: Adapter pointer to the controller
+ * @msgs: Pointer to data to be written.
+ * @num: Number of messages to be executed
+ */
+static int stm32f4_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[],
+ int num)
+{
+ struct stm32f4_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+ int ret, i;
+
+ ret = clk_enable(i2c_dev->clk);
+ if (ret) {
+ dev_err(i2c_dev->dev, "Failed to enable clock\n");
+ return ret;
+ }
+
+ for (i = 0; i < num && !ret; i++)
+ ret = stm32f4_i2c_xfer_msg(i2c_dev, &msgs[i], i == 0,
+ i == num - 1);
+
+ clk_disable(i2c_dev->clk);
+
+ return (ret < 0) ? ret : num;
+}
+
+static u32 stm32f4_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm stm32f4_i2c_algo = {
+ .master_xfer = stm32f4_i2c_xfer,
+ .functionality = stm32f4_i2c_func,
+};
+
+static int stm32f4_i2c_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct stm32f4_i2c_dev *i2c_dev;
+ struct resource *res;
+ u32 irq_event, irq_error, clk_rate;
+ struct i2c_adapter *adap;
+ struct reset_control *rst;
+ int ret;
+
+ i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+ if (!i2c_dev)
+ return -ENOMEM;
+
+ i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(i2c_dev->base))
+ return PTR_ERR(i2c_dev->base);
+
+ irq_event = irq_of_parse_and_map(np, 0);
+ if (!irq_event) {
+ dev_err(&pdev->dev, "IRQ event missing or invalid\n");
+ return -EINVAL;
+ }
+
+ irq_error = irq_of_parse_and_map(np, 1);
+ if (!irq_error) {
+ dev_err(&pdev->dev, "IRQ error missing or invalid\n");
+ return -EINVAL;
+ }
+
+ i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(i2c_dev->clk)) {
+ dev_err(&pdev->dev, "Error: Missing controller clock\n");
+ return PTR_ERR(i2c_dev->clk);
+ }
+ ret = clk_prepare_enable(i2c_dev->clk);
+ if (ret) {
+ dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n");
+ return ret;
+ }
+
+ rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(rst)) {
+ ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
+ "Error: Missing reset ctrl\n");
+ goto clk_free;
+ }
+ reset_control_assert(rst);
+ udelay(2);
+ reset_control_deassert(rst);
+
+ i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
+ ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
+ if (!ret && clk_rate >= I2C_MAX_FAST_MODE_FREQ)
+ i2c_dev->speed = STM32_I2C_SPEED_FAST;
+
+ i2c_dev->dev = &pdev->dev;
+
+ ret = devm_request_irq(&pdev->dev, irq_event, stm32f4_i2c_isr_event, 0,
+ pdev->name, i2c_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request irq event %i\n",
+ irq_event);
+ goto clk_free;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq_error, stm32f4_i2c_isr_error, 0,
+ pdev->name, i2c_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request irq error %i\n",
+ irq_error);
+ goto clk_free;
+ }
+
+ ret = stm32f4_i2c_hw_config(i2c_dev);
+ if (ret)
+ goto clk_free;
+
+ adap = &i2c_dev->adap;
+ i2c_set_adapdata(adap, i2c_dev);
+ snprintf(adap->name, sizeof(adap->name), "STM32 I2C(%pa)", &res->start);
+ adap->owner = THIS_MODULE;
+ adap->timeout = 2 * HZ;
+ adap->retries = 0;
+ adap->algo = &stm32f4_i2c_algo;
+ adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
+
+ init_completion(&i2c_dev->complete);
+
+ ret = i2c_add_adapter(adap);
+ if (ret)
+ goto clk_free;
+
+ platform_set_drvdata(pdev, i2c_dev);
+
+ clk_disable(i2c_dev->clk);
+
+ dev_info(i2c_dev->dev, "STM32F4 I2C driver registered\n");
+
+ return 0;
+
+clk_free:
+ clk_disable_unprepare(i2c_dev->clk);
+ return ret;
+}
+
+static void stm32f4_i2c_remove(struct platform_device *pdev)
+{
+ struct stm32f4_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c_dev->adap);
+
+ clk_unprepare(i2c_dev->clk);
+}
+
+static const struct of_device_id stm32f4_i2c_match[] = {
+ { .compatible = "st,stm32f4-i2c", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stm32f4_i2c_match);
+
+static struct platform_driver stm32f4_i2c_driver = {
+ .driver = {
+ .name = "stm32f4-i2c",
+ .of_match_table = stm32f4_i2c_match,
+ },
+ .probe = stm32f4_i2c_probe,
+ .remove_new = stm32f4_i2c_remove,
+};
+
+module_platform_driver(stm32f4_i2c_driver);
+
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32F4 I2C driver");
+MODULE_LICENSE("GPL v2");