diff options
Diffstat (limited to 'drivers/iio/adc/npcm_adc.c')
-rw-r--r-- | drivers/iio/adc/npcm_adc.c | 353 |
1 files changed, 353 insertions, 0 deletions
diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c new file mode 100644 index 0000000000..3d9207c160 --- /dev/null +++ b/drivers/iio/adc/npcm_adc.c @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology corporation. + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/mfd/syscon.h> +#include <linux/io.h> +#include <linux/iio/iio.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/reset.h> + +struct npcm_adc_info { + u32 data_mask; + u32 internal_vref; + u32 res_bits; +}; + +struct npcm_adc { + bool int_status; + u32 adc_sample_hz; + struct device *dev; + void __iomem *regs; + struct clk *adc_clk; + wait_queue_head_t wq; + struct regulator *vref; + struct reset_control *reset; + /* + * Lock to protect the device state during a potential concurrent + * read access from userspace. Reading a raw value requires a sequence + * of register writes, then a wait for a event and finally a register + * read, during which userspace could issue another read request. + * This lock protects a read access from ocurring before another one + * has finished. + */ + struct mutex lock; + const struct npcm_adc_info *data; +}; + +/* ADC registers */ +#define NPCM_ADCCON 0x00 +#define NPCM_ADCDATA 0x04 + +/* ADCCON Register Bits */ +#define NPCM_ADCCON_ADC_INT_EN BIT(21) +#define NPCM_ADCCON_REFSEL BIT(19) +#define NPCM_ADCCON_ADC_INT_ST BIT(18) +#define NPCM_ADCCON_ADC_EN BIT(17) +#define NPCM_ADCCON_ADC_RST BIT(16) +#define NPCM_ADCCON_ADC_CONV BIT(13) + +#define NPCM_ADCCON_CH_MASK GENMASK(27, 24) +#define NPCM_ADCCON_CH(x) ((x) << 24) +#define NPCM_ADCCON_DIV_SHIFT 1 +#define NPCM_ADCCON_DIV_MASK GENMASK(8, 1) + +#define NPCM_ADC_ENABLE (NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN) + +/* ADC General Definition */ +static const struct npcm_adc_info npxm7xx_adc_info = { + .data_mask = GENMASK(9, 0), + .internal_vref = 2048, + .res_bits = 10, +}; + +static const struct npcm_adc_info npxm8xx_adc_info = { + .data_mask = GENMASK(11, 0), + .internal_vref = 1229, + .res_bits = 12, +}; + +#define NPCM_ADC_CHAN(ch) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = ch, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ +} + +static const struct iio_chan_spec npcm_adc_iio_channels[] = { + NPCM_ADC_CHAN(0), + NPCM_ADC_CHAN(1), + NPCM_ADC_CHAN(2), + NPCM_ADC_CHAN(3), + NPCM_ADC_CHAN(4), + NPCM_ADC_CHAN(5), + NPCM_ADC_CHAN(6), + NPCM_ADC_CHAN(7), +}; + +static irqreturn_t npcm_adc_isr(int irq, void *data) +{ + u32 regtemp; + struct iio_dev *indio_dev = data; + struct npcm_adc *info = iio_priv(indio_dev); + + regtemp = ioread32(info->regs + NPCM_ADCCON); + if (regtemp & NPCM_ADCCON_ADC_INT_ST) { + iowrite32(regtemp, info->regs + NPCM_ADCCON); + wake_up_interruptible(&info->wq); + info->int_status = true; + } + + return IRQ_HANDLED; +} + +static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel) +{ + int ret; + u32 regtemp; + + /* Select ADC channel */ + regtemp = ioread32(info->regs + NPCM_ADCCON); + regtemp &= ~NPCM_ADCCON_CH_MASK; + info->int_status = false; + iowrite32(regtemp | NPCM_ADCCON_CH(channel) | + NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON); + + ret = wait_event_interruptible_timeout(info->wq, info->int_status, + msecs_to_jiffies(10)); + if (ret == 0) { + regtemp = ioread32(info->regs + NPCM_ADCCON); + if (regtemp & NPCM_ADCCON_ADC_CONV) { + /* if conversion failed - reset ADC module */ + reset_control_assert(info->reset); + msleep(100); + reset_control_deassert(info->reset); + msleep(100); + + /* Enable ADC and start conversion module */ + iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV, + info->regs + NPCM_ADCCON); + dev_err(info->dev, "RESET ADC Complete\n"); + } + return -ETIMEDOUT; + } + if (ret < 0) + return ret; + + *val = ioread32(info->regs + NPCM_ADCDATA); + *val &= info->data->data_mask; + + return 0; +} + +static int npcm_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret; + int vref_uv; + struct npcm_adc *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&info->lock); + ret = npcm_adc_read(info, val, chan->channel); + mutex_unlock(&info->lock); + if (ret) { + dev_err(info->dev, "NPCM ADC read failed\n"); + return ret; + } + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + if (!IS_ERR(info->vref)) { + vref_uv = regulator_get_voltage(info->vref); + *val = vref_uv / 1000; + } else { + *val = info->data->internal_vref; + } + *val2 = info->data->res_bits; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = info->adc_sample_hz; + return IIO_VAL_INT; + default: + return -EINVAL; + } + + return 0; +} + +static const struct iio_info npcm_adc_iio_info = { + .read_raw = &npcm_adc_read_raw, +}; + +static const struct of_device_id npcm_adc_match[] = { + { .compatible = "nuvoton,npcm750-adc", .data = &npxm7xx_adc_info}, + { .compatible = "nuvoton,npcm845-adc", .data = &npxm8xx_adc_info}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, npcm_adc_match); + +static int npcm_adc_probe(struct platform_device *pdev) +{ + int ret; + int irq; + u32 div; + u32 reg_con; + struct npcm_adc *info; + struct iio_dev *indio_dev; + struct device *dev = &pdev->dev; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); + if (!indio_dev) + return -ENOMEM; + info = iio_priv(indio_dev); + + info->data = device_get_match_data(dev); + if (!info->data) + return -EINVAL; + + mutex_init(&info->lock); + + info->dev = &pdev->dev; + + info->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(info->regs)) + return PTR_ERR(info->regs); + + info->reset = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(info->reset)) + return PTR_ERR(info->reset); + + info->adc_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(info->adc_clk)) { + dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); + return PTR_ERR(info->adc_clk); + } + + /* calculate ADC clock sample rate */ + reg_con = ioread32(info->regs + NPCM_ADCCON); + div = reg_con & NPCM_ADCCON_DIV_MASK; + div = div >> NPCM_ADCCON_DIV_SHIFT; + info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto err_disable_clk; + } + + ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0, + "NPCM_ADC", indio_dev); + if (ret < 0) { + dev_err(dev, "failed requesting interrupt\n"); + goto err_disable_clk; + } + + reg_con = ioread32(info->regs + NPCM_ADCCON); + info->vref = devm_regulator_get_optional(&pdev->dev, "vref"); + if (!IS_ERR(info->vref)) { + ret = regulator_enable(info->vref); + if (ret) { + dev_err(&pdev->dev, "Can't enable ADC reference voltage\n"); + goto err_disable_clk; + } + + iowrite32(reg_con & ~NPCM_ADCCON_REFSEL, + info->regs + NPCM_ADCCON); + } else { + /* + * Any error which is not ENODEV indicates the regulator + * has been specified and so is a failure case. + */ + if (PTR_ERR(info->vref) != -ENODEV) { + ret = PTR_ERR(info->vref); + goto err_disable_clk; + } + + /* Use internal reference */ + iowrite32(reg_con | NPCM_ADCCON_REFSEL, + info->regs + NPCM_ADCCON); + } + + init_waitqueue_head(&info->wq); + + reg_con = ioread32(info->regs + NPCM_ADCCON); + reg_con |= NPCM_ADC_ENABLE; + + /* Enable the ADC Module */ + iowrite32(reg_con, info->regs + NPCM_ADCCON); + + /* Start ADC conversion */ + iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON); + + platform_set_drvdata(pdev, indio_dev); + indio_dev->name = dev_name(&pdev->dev); + indio_dev->info = &npcm_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = npcm_adc_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "Couldn't register the device.\n"); + goto err_iio_register; + } + + pr_info("NPCM ADC driver probed\n"); + + return 0; + +err_iio_register: + iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); + if (!IS_ERR(info->vref)) + regulator_disable(info->vref); +err_disable_clk: + clk_disable_unprepare(info->adc_clk); + + return ret; +} + +static int npcm_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct npcm_adc *info = iio_priv(indio_dev); + u32 regtemp; + + iio_device_unregister(indio_dev); + + regtemp = ioread32(info->regs + NPCM_ADCCON); + iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); + if (!IS_ERR(info->vref)) + regulator_disable(info->vref); + clk_disable_unprepare(info->adc_clk); + + return 0; +} + +static struct platform_driver npcm_adc_driver = { + .probe = npcm_adc_probe, + .remove = npcm_adc_remove, + .driver = { + .name = "npcm_adc", + .of_match_table = npcm_adc_match, + }, +}; + +module_platform_driver(npcm_adc_driver); + +MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver"); +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>"); +MODULE_LICENSE("GPL v2"); |