diff options
Diffstat (limited to 'drivers/iio/adc/rtq6056.c')
| -rw-r--r-- | drivers/iio/adc/rtq6056.c | 661 |
1 files changed, 661 insertions, 0 deletions
diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c new file mode 100644 index 0000000000..ad4cea6839 --- /dev/null +++ b/drivers/iio/adc/rtq6056.c @@ -0,0 +1,661 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 Richtek Technology Corp. + * + * ChiYuan Huang <cy_huang@richtek.com> + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/sysfs.h> +#include <linux/types.h> +#include <linux/util_macros.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define RTQ6056_REG_CONFIG 0x00 +#define RTQ6056_REG_SHUNTVOLT 0x01 +#define RTQ6056_REG_BUSVOLT 0x02 +#define RTQ6056_REG_POWER 0x03 +#define RTQ6056_REG_CURRENT 0x04 +#define RTQ6056_REG_CALIBRATION 0x05 +#define RTQ6056_REG_MASKENABLE 0x06 +#define RTQ6056_REG_ALERTLIMIT 0x07 +#define RTQ6056_REG_MANUFACTID 0xFE +#define RTQ6056_REG_DIEID 0xFF + +#define RTQ6056_VENDOR_ID 0x1214 +#define RTQ6056_DEFAULT_CONFIG 0x4127 +#define RTQ6056_CONT_ALLON 7 + +enum { + RTQ6056_CH_VSHUNT = 0, + RTQ6056_CH_VBUS, + RTQ6056_CH_POWER, + RTQ6056_CH_CURRENT, + RTQ6056_MAX_CHANNEL +}; + +enum { + F_OPMODE = 0, + F_VSHUNTCT, + F_VBUSCT, + F_AVG, + F_RESET, + F_MAX_FIELDS +}; + +struct rtq6056_priv { + struct device *dev; + struct regmap *regmap; + struct regmap_field *rm_fields[F_MAX_FIELDS]; + u32 shunt_resistor_uohm; + int vshuntct_us; + int vbusct_us; + int avg_sample; +}; + +static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = { + [F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2), + [F_VSHUNTCT] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 5), + [F_VBUSCT] = REG_FIELD(RTQ6056_REG_CONFIG, 6, 8), + [F_AVG] = REG_FIELD(RTQ6056_REG_CONFIG, 9, 11), + [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15), +}; + +static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = { + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .address = RTQ6056_REG_SHUNTVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .address = RTQ6056_REG_BUSVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_POWER, + .indexed = 1, + .channel = 2, + .address = RTQ6056_REG_POWER, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 2, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_CURRENT, + .indexed = 1, + .channel = 3, + .address = RTQ6056_REG_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 3, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL), +}; + +static int rtq6056_adc_read_channel(struct rtq6056_priv *priv, + struct iio_chan_spec const *ch, + int *val) +{ + struct device *dev = priv->dev; + unsigned int addr = ch->address; + unsigned int regval; + int ret; + + pm_runtime_get_sync(dev); + ret = regmap_read(priv->regmap, addr, ®val); + pm_runtime_mark_last_busy(dev); + pm_runtime_put(dev); + if (ret) + return ret; + + /* Power and VBUS is unsigned 16-bit, others are signed 16-bit */ + if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER) + *val = regval; + else + *val = sign_extend32(regval, 16); + + return IIO_VAL_INT; +} + +static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val, + int *val2) +{ + switch (ch->address) { + case RTQ6056_REG_SHUNTVOLT: + /* VSHUNT lsb 2.5uV */ + *val = 2500; + *val2 = 1000000; + return IIO_VAL_FRACTIONAL; + case RTQ6056_REG_BUSVOLT: + /* VBUS lsb 1.25mV */ + *val = 1250; + *val2 = 1000; + return IIO_VAL_FRACTIONAL; + case RTQ6056_REG_POWER: + /* Power lsb 25mW */ + *val = 25; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +/* + * Sample frequency for channel VSHUNT and VBUS. The indices correspond + * with the bit value expected by the chip. And it can be found at + * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + */ +static const int rtq6056_samp_freq_list[] = { + 7194, 4926, 3717, 1904, 964, 485, 243, 122, +}; + +static int rtq6056_adc_set_samp_freq(struct rtq6056_priv *priv, + struct iio_chan_spec const *ch, int val) +{ + struct regmap_field *rm_field; + unsigned int selector; + int *ct, ret; + + if (val > 7194 || val < 122) + return -EINVAL; + + if (ch->address == RTQ6056_REG_SHUNTVOLT) { + rm_field = priv->rm_fields[F_VSHUNTCT]; + ct = &priv->vshuntct_us; + } else if (ch->address == RTQ6056_REG_BUSVOLT) { + rm_field = priv->rm_fields[F_VBUSCT]; + ct = &priv->vbusct_us; + } else + return -EINVAL; + + selector = find_closest_descending(val, rtq6056_samp_freq_list, + ARRAY_SIZE(rtq6056_samp_freq_list)); + + ret = regmap_field_write(rm_field, selector); + if (ret) + return ret; + + *ct = 1000000 / rtq6056_samp_freq_list[selector]; + + return 0; +} + +/* + * Available averaging rate for rtq6056. The indices correspond with the bit + * value expected by the chip. And it can be found at + * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + */ +static const int rtq6056_avg_sample_list[] = { + 1, 4, 16, 64, 128, 256, 512, 1024, +}; + +static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val) +{ + unsigned int selector; + int ret; + + if (val > 1024 || val < 1) + return -EINVAL; + + selector = find_closest(val, rtq6056_avg_sample_list, + ARRAY_SIZE(rtq6056_avg_sample_list)); + + ret = regmap_field_write(priv->rm_fields[F_AVG], selector); + if (ret) + return ret; + + priv->avg_sample = rtq6056_avg_sample_list[selector]; + + return 0; +} + +static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv, + struct iio_chan_spec const *ch, int *val) +{ + int sample_time; + + if (ch->address == RTQ6056_REG_SHUNTVOLT) + sample_time = priv->vshuntct_us; + else if (ch->address == RTQ6056_REG_BUSVOLT) + sample_time = priv->vbusct_us; + else { + sample_time = priv->vshuntct_us + priv->vbusct_us; + sample_time *= priv->avg_sample; + } + + *val = 1000000 / sample_time; + + return IIO_VAL_INT; +} + +static int rtq6056_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct rtq6056_priv *priv = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return rtq6056_adc_read_channel(priv, chan, val); + case IIO_CHAN_INFO_SCALE: + return rtq6056_adc_read_scale(chan, val, val2); + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = priv->avg_sample; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + return rtq6056_adc_get_sample_freq(priv, chan, val); + default: + return -EINVAL; + } +} + +static int rtq6056_adc_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = rtq6056_samp_freq_list; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(rtq6056_samp_freq_list); + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = rtq6056_avg_sample_list; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(rtq6056_avg_sample_list); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int rtq6056_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct rtq6056_priv *priv = iio_priv(indio_dev); + int ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = rtq6056_adc_set_samp_freq(priv, chan, val); + break; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = rtq6056_adc_set_average(priv, val); + break; + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(indio_dev); + + return ret; +} + +static const char *rtq6056_channel_labels[RTQ6056_MAX_CHANNEL] = { + [RTQ6056_CH_VSHUNT] = "Vshunt", + [RTQ6056_CH_VBUS] = "Vbus", + [RTQ6056_CH_POWER] = "Power", + [RTQ6056_CH_CURRENT] = "Current", +}; + +static int rtq6056_adc_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + char *label) +{ + return sysfs_emit(label, "%s\n", rtq6056_channel_labels[chan->channel]); +} + +static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv, + int resistor_uohm) +{ + unsigned int calib_val; + int ret; + + if (resistor_uohm <= 0) { + dev_err(priv->dev, "Invalid resistor [%d]\n", resistor_uohm); + return -EINVAL; + } + + /* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */ + calib_val = 5120000 / resistor_uohm; + ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val); + if (ret) + return ret; + + priv->shunt_resistor_uohm = resistor_uohm; + + return 0; +} + +static ssize_t shunt_resistor_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct rtq6056_priv *priv = iio_priv(dev_to_iio_dev(dev)); + int vals[2] = { priv->shunt_resistor_uohm, 1000000 }; + + return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals); +} + +static ssize_t shunt_resistor_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct rtq6056_priv *priv = iio_priv(indio_dev); + int val, val_fract, ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract); + if (ret) + goto out_store; + + ret = rtq6056_set_shunt_resistor(priv, val * 1000000 + val_fract); + +out_store: + iio_device_release_direct_mode(indio_dev); + + return ret ?: len; +} + +static IIO_DEVICE_ATTR_RW(shunt_resistor, 0); + +static struct attribute *rtq6056_attributes[] = { + &iio_dev_attr_shunt_resistor.dev_attr.attr, + NULL +}; + +static const struct attribute_group rtq6056_attribute_group = { + .attrs = rtq6056_attributes, +}; + +static const struct iio_info rtq6056_info = { + .attrs = &rtq6056_attribute_group, + .read_raw = rtq6056_adc_read_raw, + .read_avail = rtq6056_adc_read_avail, + .write_raw = rtq6056_adc_write_raw, + .read_label = rtq6056_adc_read_label, +}; + +static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct rtq6056_priv *priv = iio_priv(indio_dev); + struct device *dev = priv->dev; + struct { + u16 vals[RTQ6056_MAX_CHANNEL]; + s64 timestamp __aligned(8); + } data; + unsigned int raw; + int i = 0, bit, ret; + + memset(&data, 0, sizeof(data)); + + pm_runtime_get_sync(dev); + + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { + unsigned int addr = rtq6056_channels[bit].address; + + ret = regmap_read(priv->regmap, addr, &raw); + if (ret) + goto out; + + data.vals[i++] = raw; + } + + iio_push_to_buffers_with_timestamp(indio_dev, &data, iio_get_time_ns(indio_dev)); + +out: + pm_runtime_mark_last_busy(dev); + pm_runtime_put(dev); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static void rtq6056_enter_shutdown_state(void *dev) +{ + struct rtq6056_priv *priv = dev_get_drvdata(dev); + + /* Enter shutdown state */ + regmap_field_write(priv->rm_fields[F_OPMODE], 0); +} + +static bool rtq6056_is_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RTQ6056_REG_CONFIG ... RTQ6056_REG_ALERTLIMIT: + case RTQ6056_REG_MANUFACTID ... RTQ6056_REG_DIEID: + return true; + default: + return false; + } +} + +static bool rtq6056_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RTQ6056_REG_CONFIG: + case RTQ6056_REG_CALIBRATION ... RTQ6056_REG_ALERTLIMIT: + return true; + default: + return false; + } +} + +static const struct regmap_config rtq6056_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .val_format_endian = REGMAP_ENDIAN_BIG, + .max_register = RTQ6056_REG_DIEID, + .readable_reg = rtq6056_is_readable_reg, + .writeable_reg = rtq6056_is_writeable_reg, +}; + +static int rtq6056_probe(struct i2c_client *i2c) +{ + struct iio_dev *indio_dev; + struct rtq6056_priv *priv; + struct device *dev = &i2c->dev; + struct regmap *regmap; + unsigned int vendor_id, shunt_resistor_uohm; + int ret; + + if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + priv->dev = dev; + priv->vshuntct_us = priv->vbusct_us = 1037; + priv->avg_sample = 1; + i2c_set_clientdata(i2c, priv); + + regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to init regmap\n"); + + priv->regmap = regmap; + + ret = regmap_read(regmap, RTQ6056_REG_MANUFACTID, &vendor_id); + if (ret) + return dev_err_probe(dev, ret, + "Failed to get manufacturer info\n"); + + if (vendor_id != RTQ6056_VENDOR_ID) + return dev_err_probe(dev, -ENODEV, + "Invalid vendor id 0x%04x\n", vendor_id); + + ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields, + rtq6056_reg_fields, F_MAX_FIELDS); + if (ret) + return dev_err_probe(dev, ret, "Failed to init regmap field\n"); + + /* + * By default, configure average sample as 1, bus and shunt conversion + * time as 1037 microsecond, and operating mode to all on. + */ + ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG); + if (ret) + return dev_err_probe(dev, ret, + "Failed to enable continuous sensing\n"); + + ret = devm_add_action_or_reset(dev, rtq6056_enter_shutdown_state, dev); + if (ret) + return ret; + + pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_active(dev); + pm_runtime_mark_last_busy(dev); + ret = devm_pm_runtime_enable(dev); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n"); + + /* By default, use 2000 micro-Ohm resistor */ + shunt_resistor_uohm = 2000; + device_property_read_u32(dev, "shunt-resistor-micro-ohms", + &shunt_resistor_uohm); + + ret = rtq6056_set_shunt_resistor(priv, shunt_resistor_uohm); + if (ret) + return dev_err_probe(dev, ret, + "Failed to init shunt resistor\n"); + + indio_dev->name = "rtq6056"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = rtq6056_channels; + indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels); + indio_dev->info = &rtq6056_info; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + rtq6056_buffer_trigger_handler, + NULL); + if (ret) + return dev_err_probe(dev, ret, + "Failed to allocate iio trigger buffer\n"); + + return devm_iio_device_register(dev, indio_dev); +} + +static int rtq6056_runtime_suspend(struct device *dev) +{ + struct rtq6056_priv *priv = dev_get_drvdata(dev); + + /* Configure to shutdown mode */ + return regmap_field_write(priv->rm_fields[F_OPMODE], 0); +} + +static int rtq6056_runtime_resume(struct device *dev) +{ + struct rtq6056_priv *priv = dev_get_drvdata(dev); + int sample_rdy_time_us, ret; + + ret = regmap_field_write(priv->rm_fields[F_OPMODE], RTQ6056_CONT_ALLON); + if (ret) + return ret; + + sample_rdy_time_us = priv->vbusct_us + priv->vshuntct_us; + sample_rdy_time_us *= priv->avg_sample; + + usleep_range(sample_rdy_time_us, sample_rdy_time_us + 100); + + return 0; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend, + rtq6056_runtime_resume, NULL); + +static const struct of_device_id rtq6056_device_match[] = { + { .compatible = "richtek,rtq6056" }, + {} +}; +MODULE_DEVICE_TABLE(of, rtq6056_device_match); + +static struct i2c_driver rtq6056_driver = { + .driver = { + .name = "rtq6056", + .of_match_table = rtq6056_device_match, + .pm = pm_ptr(&rtq6056_pm_ops), + }, + .probe = rtq6056_probe, +}; +module_i2c_driver(rtq6056_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("Richtek RTQ6056 Driver"); +MODULE_LICENSE("GPL v2"); |