diff options
Diffstat (limited to 'drivers/iio/chemical/bme680.h')
| -rw-r--r-- | drivers/iio/chemical/bme680.h | 91 |
1 files changed, 91 insertions, 0 deletions
diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h new file mode 100644 index 000000000..4edc5d21c --- /dev/null +++ b/drivers/iio/chemical/bme680.h @@ -0,0 +1,91 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef BME680_H_ +#define BME680_H_ + +#define BME680_REG_CHIP_ID 0xD0 +#define BME680_CHIP_ID_VAL 0x61 +#define BME680_REG_SOFT_RESET 0xE0 +#define BME680_CMD_SOFTRESET 0xB6 +#define BME680_REG_STATUS 0x73 +#define BME680_SPI_MEM_PAGE_BIT BIT(4) +#define BME680_SPI_MEM_PAGE_1_VAL 1 + +#define BME680_REG_TEMP_MSB 0x22 +#define BME680_REG_PRESS_MSB 0x1F +#define BM6880_REG_HUMIDITY_MSB 0x25 +#define BME680_REG_GAS_MSB 0x2A +#define BME680_REG_GAS_R_LSB 0x2B +#define BME680_GAS_STAB_BIT BIT(4) +#define BME680_GAS_RANGE_MASK GENMASK(3, 0) + +#define BME680_REG_CTRL_HUMIDITY 0x72 +#define BME680_OSRS_HUMIDITY_MASK GENMASK(2, 0) + +#define BME680_REG_CTRL_MEAS 0x74 +#define BME680_OSRS_TEMP_MASK GENMASK(7, 5) +#define BME680_OSRS_PRESS_MASK GENMASK(4, 2) +#define BME680_MODE_MASK GENMASK(1, 0) +#define BME680_MODE_FORCED 1 +#define BME680_MODE_SLEEP 0 + +#define BME680_REG_CONFIG 0x75 +#define BME680_FILTER_MASK GENMASK(4, 2) +#define BME680_FILTER_COEFF_VAL BIT(1) + +/* TEMP/PRESS/HUMID reading skipped */ +#define BME680_MEAS_SKIPPED 0x8000 + +#define BME680_MAX_OVERFLOW_VAL 0x40000000 +#define BME680_HUM_REG_SHIFT_VAL 4 +#define BME680_BIT_H1_DATA_MASK GENMASK(3, 0) + +#define BME680_REG_RES_HEAT_RANGE 0x02 +#define BME680_RHRANGE_MASK GENMASK(5, 4) +#define BME680_REG_RES_HEAT_VAL 0x00 +#define BME680_REG_RANGE_SW_ERR 0x04 +#define BME680_RSERROR_MASK GENMASK(7, 4) +#define BME680_REG_RES_HEAT_0 0x5A +#define BME680_REG_GAS_WAIT_0 0x64 +#define BME680_ADC_GAS_RES_SHIFT 6 +#define BME680_AMB_TEMP 25 + +#define BME680_REG_CTRL_GAS_1 0x71 +#define BME680_RUN_GAS_MASK BIT(4) +#define BME680_NB_CONV_MASK GENMASK(3, 0) + +#define BME680_REG_MEAS_STAT_0 0x1D +#define BME680_GAS_MEAS_BIT BIT(6) + +/* Calibration Parameters */ +#define BME680_T2_LSB_REG 0x8A +#define BME680_T3_REG 0x8C +#define BME680_P1_LSB_REG 0x8E +#define BME680_P2_LSB_REG 0x90 +#define BME680_P3_REG 0x92 +#define BME680_P4_LSB_REG 0x94 +#define BME680_P5_LSB_REG 0x96 +#define BME680_P7_REG 0x98 +#define BME680_P6_REG 0x99 +#define BME680_P8_LSB_REG 0x9C +#define BME680_P9_LSB_REG 0x9E +#define BME680_P10_REG 0xA0 +#define BME680_H2_LSB_REG 0xE2 +#define BME680_H2_MSB_REG 0xE1 +#define BME680_H1_MSB_REG 0xE3 +#define BME680_H1_LSB_REG 0xE2 +#define BME680_H3_REG 0xE4 +#define BME680_H4_REG 0xE5 +#define BME680_H5_REG 0xE6 +#define BME680_H6_REG 0xE7 +#define BME680_H7_REG 0xE8 +#define BME680_T1_LSB_REG 0xE9 +#define BME680_GH2_LSB_REG 0xEB +#define BME680_GH1_REG 0xED +#define BME680_GH3_REG 0xEE + +extern const struct regmap_config bme680_regmap_config; + +int bme680_core_probe(struct device *dev, struct regmap *regmap, + const char *name); + +#endif /* BME680_H_ */ |