diff options
Diffstat (limited to 'drivers/iio/imu/bmi323/bmi323.h')
| -rw-r--r-- | drivers/iio/imu/bmi323/bmi323.h | 209 |
1 files changed, 209 insertions, 0 deletions
diff --git a/drivers/iio/imu/bmi323/bmi323.h b/drivers/iio/imu/bmi323/bmi323.h new file mode 100644 index 0000000000..dff126d416 --- /dev/null +++ b/drivers/iio/imu/bmi323/bmi323.h @@ -0,0 +1,209 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * IIO driver for Bosch BMI323 6-Axis IMU + * + * Copyright (C) 2023, Jagath Jog J <jagathjog1996@gmail.com> + */ + +#ifndef _BMI323_H_ +#define _BMI323_H_ + +#include <linux/bits.h> +#include <linux/regmap.h> +#include <linux/units.h> + +#define BMI323_I2C_DUMMY 2 +#define BMI323_SPI_DUMMY 1 + +/* Register map */ + +#define BMI323_CHIP_ID_REG 0x00 +#define BMI323_CHIP_ID_VAL 0x0043 +#define BMI323_CHIP_ID_MSK GENMASK(7, 0) +#define BMI323_ERR_REG 0x01 +#define BMI323_STATUS_REG 0x02 +#define BMI323_STATUS_POR_MSK BIT(0) + +/* Accelero/Gyro/Temp data registers */ +#define BMI323_ACCEL_X_REG 0x03 +#define BMI323_GYRO_X_REG 0x06 +#define BMI323_TEMP_REG 0x09 +#define BMI323_ALL_CHAN_MSK GENMASK(5, 0) + +/* Status registers */ +#define BMI323_STATUS_INT1_REG 0x0D +#define BMI323_STATUS_INT2_REG 0x0E +#define BMI323_STATUS_NOMOTION_MSK BIT(0) +#define BMI323_STATUS_MOTION_MSK BIT(1) +#define BMI323_STATUS_STP_WTR_MSK BIT(5) +#define BMI323_STATUS_TAP_MSK BIT(8) +#define BMI323_STATUS_ERROR_MSK BIT(10) +#define BMI323_STATUS_TMP_DRDY_MSK BIT(11) +#define BMI323_STATUS_GYR_DRDY_MSK BIT(12) +#define BMI323_STATUS_ACC_DRDY_MSK BIT(13) +#define BMI323_STATUS_ACC_GYR_DRDY_MSK GENMASK(13, 12) +#define BMI323_STATUS_FIFO_WTRMRK_MSK BIT(14) +#define BMI323_STATUS_FIFO_FULL_MSK BIT(15) + +/* Feature registers */ +#define BMI323_FEAT_IO0_REG 0x10 +#define BMI323_FEAT_IO0_XYZ_NOMOTION_MSK GENMASK(2, 0) +#define BMI323_FEAT_IO0_XYZ_MOTION_MSK GENMASK(5, 3) +#define BMI323_FEAT_XYZ_MSK GENMASK(2, 0) +#define BMI323_FEAT_IO0_STP_CNT_MSK BIT(9) +#define BMI323_FEAT_IO0_S_TAP_MSK BIT(12) +#define BMI323_FEAT_IO0_D_TAP_MSK BIT(13) +#define BMI323_FEAT_IO1_REG 0x11 +#define BMI323_FEAT_IO1_ERR_MSK GENMASK(3, 0) +#define BMI323_FEAT_IO2_REG 0x12 +#define BMI323_FEAT_IO_STATUS_REG 0x14 +#define BMI323_FEAT_IO_STATUS_MSK BIT(0) +#define BMI323_FEAT_ENG_POLL 2000 +#define BMI323_FEAT_ENG_TIMEOUT 10000 + +/* FIFO registers */ +#define BMI323_FIFO_FILL_LEVEL_REG 0x15 +#define BMI323_FIFO_DATA_REG 0x16 + +/* Accelero/Gyro config registers */ +#define BMI323_ACC_CONF_REG 0x20 +#define BMI323_GYRO_CONF_REG 0x21 +#define BMI323_ACC_GYRO_CONF_MODE_MSK GENMASK(14, 12) +#define BMI323_ACC_GYRO_CONF_ODR_MSK GENMASK(3, 0) +#define BMI323_ACC_GYRO_CONF_SCL_MSK GENMASK(6, 4) +#define BMI323_ACC_GYRO_CONF_BW_MSK BIT(7) +#define BMI323_ACC_GYRO_CONF_AVG_MSK GENMASK(10, 8) + +/* FIFO registers */ +#define BMI323_FIFO_WTRMRK_REG 0x35 +#define BMI323_FIFO_CONF_REG 0x36 +#define BMI323_FIFO_CONF_STP_FUL_MSK BIT(0) +#define BMI323_FIFO_CONF_ACC_GYR_EN_MSK GENMASK(10, 9) +#define BMI323_FIFO_ACC_GYR_MSK GENMASK(1, 0) +#define BMI323_FIFO_CTRL_REG 0x37 +#define BMI323_FIFO_FLUSH_MSK BIT(0) + +/* Interrupt pin config registers */ +#define BMI323_IO_INT_CTR_REG 0x38 +#define BMI323_IO_INT1_LVL_MSK BIT(0) +#define BMI323_IO_INT1_OD_MSK BIT(1) +#define BMI323_IO_INT1_OP_EN_MSK BIT(2) +#define BMI323_IO_INT1_LVL_OD_OP_MSK GENMASK(2, 0) +#define BMI323_IO_INT2_LVL_MSK BIT(8) +#define BMI323_IO_INT2_OD_MSK BIT(9) +#define BMI323_IO_INT2_OP_EN_MSK BIT(10) +#define BMI323_IO_INT2_LVL_OD_OP_MSK GENMASK(10, 8) +#define BMI323_IO_INT_CONF_REG 0x39 +#define BMI323_IO_INT_LTCH_MSK BIT(0) +#define BMI323_INT_MAP1_REG 0x3A +#define BMI323_INT_MAP2_REG 0x3B +#define BMI323_NOMOTION_MSK GENMASK(1, 0) +#define BMI323_MOTION_MSK GENMASK(3, 2) +#define BMI323_STEP_CNT_MSK GENMASK(11, 10) +#define BMI323_TAP_MSK GENMASK(1, 0) +#define BMI323_TMP_DRDY_MSK GENMASK(7, 6) +#define BMI323_GYR_DRDY_MSK GENMASK(9, 8) +#define BMI323_ACC_DRDY_MSK GENMASK(11, 10) +#define BMI323_FIFO_WTRMRK_MSK GENMASK(13, 12) +#define BMI323_FIFO_FULL_MSK GENMASK(15, 14) + +/* Feature registers */ +#define BMI323_FEAT_CTRL_REG 0x40 +#define BMI323_FEAT_ENG_EN_MSK BIT(0) +#define BMI323_FEAT_DATA_ADDR 0x41 +#define BMI323_FEAT_DATA_TX 0x42 +#define BMI323_FEAT_DATA_STATUS 0x43 +#define BMI323_FEAT_DATA_TX_RDY_MSK BIT(1) +#define BMI323_FEAT_EVNT_EXT_REG 0x47 +#define BMI323_FEAT_EVNT_EXT_S_MSK BIT(3) +#define BMI323_FEAT_EVNT_EXT_D_MSK BIT(4) + +#define BMI323_CMD_REG 0x7E +#define BMI323_RST_VAL 0xDEAF +#define BMI323_CFG_RES_REG 0x7F + +/* Extended registers */ +#define BMI323_GEN_SET1_REG 0x02 +#define BMI323_GEN_SET1_MODE_MSK BIT(0) +#define BMI323_GEN_HOLD_DUR_MSK GENMASK(4, 1) + +/* Any Motion/No Motion config registers */ +#define BMI323_ANYMO1_REG 0x05 +#define BMI323_NOMO1_REG 0x08 +#define BMI323_MO2_OFFSET 0x01 +#define BMI323_MO3_OFFSET 0x02 +#define BMI323_MO1_REF_UP_MSK BIT(12) +#define BMI323_MO1_SLOPE_TH_MSK GENMASK(11, 0) +#define BMI323_MO2_HYSTR_MSK GENMASK(9, 0) +#define BMI323_MO3_DURA_MSK GENMASK(12, 0) + +/* Step counter config registers */ +#define BMI323_STEP_SC1_REG 0x10 +#define BMI323_STEP_SC1_WTRMRK_MSK GENMASK(9, 0) +#define BMI323_STEP_SC1_RST_CNT_MSK BIT(10) +#define BMI323_STEP_SC1_REG 0x10 +#define BMI323_STEP_LEN 2 + +/* Tap gesture config registers */ +#define BMI323_TAP1_REG 0x1E +#define BMI323_TAP1_AXIS_SEL_MSK GENMASK(1, 0) +#define BMI323_AXIS_XYZ_MSK GENMASK(1, 0) +#define BMI323_TAP1_TIMOUT_MSK BIT(2) +#define BMI323_TAP1_MAX_PEAKS_MSK GENMASK(5, 3) +#define BMI323_TAP1_MODE_MSK GENMASK(7, 6) +#define BMI323_TAP2_REG 0x1F +#define BMI323_TAP2_THRES_MSK GENMASK(9, 0) +#define BMI323_TAP2_MAX_DUR_MSK GENMASK(15, 10) +#define BMI323_TAP3_REG 0x20 +#define BMI323_TAP3_QUIET_TIM_MSK GENMASK(15, 12) +#define BMI323_TAP3_QT_BW_TAP_MSK GENMASK(11, 8) +#define BMI323_TAP3_QT_AFT_GES_MSK GENMASK(15, 12) + +#define BMI323_MOTION_THRES_SCALE 512 +#define BMI323_MOTION_HYSTR_SCALE 512 +#define BMI323_MOTION_DURAT_SCALE 50 +#define BMI323_TAP_THRES_SCALE 512 +#define BMI323_DUR_BW_TAP_SCALE 200 +#define BMI323_QUITE_TIM_GES_SCALE 25 +#define BMI323_MAX_GES_DUR_SCALE 25 + +/* + * The formula to calculate temperature in C. + * See datasheet section 6.1.1, Register Map Overview + * + * T_C = (temp_raw / 512) + 23 + */ +#define BMI323_TEMP_OFFSET 11776 +#define BMI323_TEMP_SCALE 1953125 + +/* + * The BMI323 features a FIFO with a capacity of 2048 bytes. Each frame + * consists of accelerometer (X, Y, Z) data and gyroscope (X, Y, Z) data, + * totaling 6 words or 12 bytes. The FIFO buffer can hold a total of + * 170 frames. + * + * If a watermark interrupt is configured for 170 frames, the interrupt will + * trigger when the FIFO reaches 169 frames, so limit the maximum watermark + * level to 169 frames. In terms of data, 169 frames would equal 1014 bytes, + * which is approximately 2 frames before the FIFO reaches its full capacity. + * See datasheet section 5.7.3 FIFO Buffer Interrupts + */ +#define BMI323_BYTES_PER_SAMPLE 2 +#define BMI323_FIFO_LENGTH_IN_BYTES 2048 +#define BMI323_FIFO_FRAME_LENGTH 6 +#define BMI323_FIFO_FULL_IN_FRAMES \ + ((BMI323_FIFO_LENGTH_IN_BYTES / \ + (BMI323_BYTES_PER_SAMPLE * BMI323_FIFO_FRAME_LENGTH)) - 1) +#define BMI323_FIFO_FULL_IN_WORDS \ + (BMI323_FIFO_FULL_IN_FRAMES * BMI323_FIFO_FRAME_LENGTH) + +#define BMI323_INT_MICRO_TO_RAW(val, val2, scale) ((val) * (scale) + \ + ((val2) * (scale)) / MEGA) + +#define BMI323_RAW_TO_MICRO(raw, scale) ((((raw) % (scale)) * MEGA) / scale) + +struct device; +int bmi323_core_probe(struct device *dev); +extern const struct regmap_config bmi323_regmap_config; + +#endif |