diff options
Diffstat (limited to 'drivers/iio/imu/inv_icm42600/inv_icm42600_core.c')
-rw-r--r-- | drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 802 |
1 files changed, 802 insertions, 0 deletions
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c new file mode 100644 index 0000000000..a5e81906e3 --- /dev/null +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c @@ -0,0 +1,802 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2020 Invensense, Inc. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/regmap.h> + +#include <linux/iio/iio.h> + +#include "inv_icm42600.h" +#include "inv_icm42600_buffer.h" + +static const struct regmap_range_cfg inv_icm42600_regmap_ranges[] = { + { + .name = "user banks", + .range_min = 0x0000, + .range_max = 0x4FFF, + .selector_reg = INV_ICM42600_REG_BANK_SEL, + .selector_mask = INV_ICM42600_BANK_SEL_MASK, + .selector_shift = 0, + .window_start = 0, + .window_len = 0x1000, + }, +}; + +const struct regmap_config inv_icm42600_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x4FFF, + .ranges = inv_icm42600_regmap_ranges, + .num_ranges = ARRAY_SIZE(inv_icm42600_regmap_ranges), +}; +EXPORT_SYMBOL_NS_GPL(inv_icm42600_regmap_config, IIO_ICM42600); + +struct inv_icm42600_hw { + uint8_t whoami; + const char *name; + const struct inv_icm42600_conf *conf; +}; + +/* chip initial default configuration */ +static const struct inv_icm42600_conf inv_icm42600_default_conf = { + .gyro = { + .mode = INV_ICM42600_SENSOR_MODE_OFF, + .fs = INV_ICM42600_GYRO_FS_2000DPS, + .odr = INV_ICM42600_ODR_50HZ, + .filter = INV_ICM42600_FILTER_BW_ODR_DIV_2, + }, + .accel = { + .mode = INV_ICM42600_SENSOR_MODE_OFF, + .fs = INV_ICM42600_ACCEL_FS_16G, + .odr = INV_ICM42600_ODR_50HZ, + .filter = INV_ICM42600_FILTER_BW_ODR_DIV_2, + }, + .temp_en = false, +}; + +static const struct inv_icm42600_hw inv_icm42600_hw[INV_CHIP_NB] = { + [INV_CHIP_ICM42600] = { + .whoami = INV_ICM42600_WHOAMI_ICM42600, + .name = "icm42600", + .conf = &inv_icm42600_default_conf, + }, + [INV_CHIP_ICM42602] = { + .whoami = INV_ICM42600_WHOAMI_ICM42602, + .name = "icm42602", + .conf = &inv_icm42600_default_conf, + }, + [INV_CHIP_ICM42605] = { + .whoami = INV_ICM42600_WHOAMI_ICM42605, + .name = "icm42605", + .conf = &inv_icm42600_default_conf, + }, + [INV_CHIP_ICM42622] = { + .whoami = INV_ICM42600_WHOAMI_ICM42622, + .name = "icm42622", + .conf = &inv_icm42600_default_conf, + }, + [INV_CHIP_ICM42631] = { + .whoami = INV_ICM42600_WHOAMI_ICM42631, + .name = "icm42631", + .conf = &inv_icm42600_default_conf, + }, +}; + +const struct iio_mount_matrix * +inv_icm42600_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + const struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev); + + return &st->orientation; +} + +uint32_t inv_icm42600_odr_to_period(enum inv_icm42600_odr odr) +{ + static uint32_t odr_periods[INV_ICM42600_ODR_NB] = { + /* reserved values */ + 0, 0, 0, + /* 8kHz */ + 125000, + /* 4kHz */ + 250000, + /* 2kHz */ + 500000, + /* 1kHz */ + 1000000, + /* 200Hz */ + 5000000, + /* 100Hz */ + 10000000, + /* 50Hz */ + 20000000, + /* 25Hz */ + 40000000, + /* 12.5Hz */ + 80000000, + /* 6.25Hz */ + 160000000, + /* 3.125Hz */ + 320000000, + /* 1.5625Hz */ + 640000000, + /* 500Hz */ + 2000000, + }; + + return odr_periods[odr]; +} + +static int inv_icm42600_set_pwr_mgmt0(struct inv_icm42600_state *st, + enum inv_icm42600_sensor_mode gyro, + enum inv_icm42600_sensor_mode accel, + bool temp, unsigned int *sleep_ms) +{ + enum inv_icm42600_sensor_mode oldgyro = st->conf.gyro.mode; + enum inv_icm42600_sensor_mode oldaccel = st->conf.accel.mode; + bool oldtemp = st->conf.temp_en; + unsigned int sleepval; + unsigned int val; + int ret; + + /* if nothing changed, exit */ + if (gyro == oldgyro && accel == oldaccel && temp == oldtemp) + return 0; + + val = INV_ICM42600_PWR_MGMT0_GYRO(gyro) | + INV_ICM42600_PWR_MGMT0_ACCEL(accel); + if (!temp) + val |= INV_ICM42600_PWR_MGMT0_TEMP_DIS; + ret = regmap_write(st->map, INV_ICM42600_REG_PWR_MGMT0, val); + if (ret) + return ret; + + st->conf.gyro.mode = gyro; + st->conf.accel.mode = accel; + st->conf.temp_en = temp; + + /* compute required wait time for sensors to stabilize */ + sleepval = 0; + /* temperature stabilization time */ + if (temp && !oldtemp) { + if (sleepval < INV_ICM42600_TEMP_STARTUP_TIME_MS) + sleepval = INV_ICM42600_TEMP_STARTUP_TIME_MS; + } + /* accel startup time */ + if (accel != oldaccel && oldaccel == INV_ICM42600_SENSOR_MODE_OFF) { + /* block any register write for at least 200 µs */ + usleep_range(200, 300); + if (sleepval < INV_ICM42600_ACCEL_STARTUP_TIME_MS) + sleepval = INV_ICM42600_ACCEL_STARTUP_TIME_MS; + } + if (gyro != oldgyro) { + /* gyro startup time */ + if (oldgyro == INV_ICM42600_SENSOR_MODE_OFF) { + /* block any register write for at least 200 µs */ + usleep_range(200, 300); + if (sleepval < INV_ICM42600_GYRO_STARTUP_TIME_MS) + sleepval = INV_ICM42600_GYRO_STARTUP_TIME_MS; + /* gyro stop time */ + } else if (gyro == INV_ICM42600_SENSOR_MODE_OFF) { + if (sleepval < INV_ICM42600_GYRO_STOP_TIME_MS) + sleepval = INV_ICM42600_GYRO_STOP_TIME_MS; + } + } + + /* deferred sleep value if sleep pointer is provided or direct sleep */ + if (sleep_ms) + *sleep_ms = sleepval; + else if (sleepval) + msleep(sleepval); + + return 0; +} + +int inv_icm42600_set_accel_conf(struct inv_icm42600_state *st, + struct inv_icm42600_sensor_conf *conf, + unsigned int *sleep_ms) +{ + struct inv_icm42600_sensor_conf *oldconf = &st->conf.accel; + unsigned int val; + int ret; + + /* Sanitize missing values with current values */ + if (conf->mode < 0) + conf->mode = oldconf->mode; + if (conf->fs < 0) + conf->fs = oldconf->fs; + if (conf->odr < 0) + conf->odr = oldconf->odr; + if (conf->filter < 0) + conf->filter = oldconf->filter; + + /* set ACCEL_CONFIG0 register (accel fullscale & odr) */ + if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) { + val = INV_ICM42600_ACCEL_CONFIG0_FS(conf->fs) | + INV_ICM42600_ACCEL_CONFIG0_ODR(conf->odr); + ret = regmap_write(st->map, INV_ICM42600_REG_ACCEL_CONFIG0, val); + if (ret) + return ret; + oldconf->fs = conf->fs; + oldconf->odr = conf->odr; + } + + /* set GYRO_ACCEL_CONFIG0 register (accel filter) */ + if (conf->filter != oldconf->filter) { + val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(conf->filter) | + INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(st->conf.gyro.filter); + ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val); + if (ret) + return ret; + oldconf->filter = conf->filter; + } + + /* set PWR_MGMT0 register (accel sensor mode) */ + return inv_icm42600_set_pwr_mgmt0(st, st->conf.gyro.mode, conf->mode, + st->conf.temp_en, sleep_ms); +} + +int inv_icm42600_set_gyro_conf(struct inv_icm42600_state *st, + struct inv_icm42600_sensor_conf *conf, + unsigned int *sleep_ms) +{ + struct inv_icm42600_sensor_conf *oldconf = &st->conf.gyro; + unsigned int val; + int ret; + + /* sanitize missing values with current values */ + if (conf->mode < 0) + conf->mode = oldconf->mode; + if (conf->fs < 0) + conf->fs = oldconf->fs; + if (conf->odr < 0) + conf->odr = oldconf->odr; + if (conf->filter < 0) + conf->filter = oldconf->filter; + + /* set GYRO_CONFIG0 register (gyro fullscale & odr) */ + if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) { + val = INV_ICM42600_GYRO_CONFIG0_FS(conf->fs) | + INV_ICM42600_GYRO_CONFIG0_ODR(conf->odr); + ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_CONFIG0, val); + if (ret) + return ret; + oldconf->fs = conf->fs; + oldconf->odr = conf->odr; + } + + /* set GYRO_ACCEL_CONFIG0 register (gyro filter) */ + if (conf->filter != oldconf->filter) { + val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(st->conf.accel.filter) | + INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(conf->filter); + ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val); + if (ret) + return ret; + oldconf->filter = conf->filter; + } + + /* set PWR_MGMT0 register (gyro sensor mode) */ + return inv_icm42600_set_pwr_mgmt0(st, conf->mode, st->conf.accel.mode, + st->conf.temp_en, sleep_ms); + + return 0; +} + +int inv_icm42600_set_temp_conf(struct inv_icm42600_state *st, bool enable, + unsigned int *sleep_ms) +{ + return inv_icm42600_set_pwr_mgmt0(st, st->conf.gyro.mode, + st->conf.accel.mode, enable, + sleep_ms); +} + +int inv_icm42600_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg, + unsigned int writeval, unsigned int *readval) +{ + struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev); + int ret; + + mutex_lock(&st->lock); + + if (readval) + ret = regmap_read(st->map, reg, readval); + else + ret = regmap_write(st->map, reg, writeval); + + mutex_unlock(&st->lock); + + return ret; +} + +static int inv_icm42600_set_conf(struct inv_icm42600_state *st, + const struct inv_icm42600_conf *conf) +{ + unsigned int val; + int ret; + + /* set PWR_MGMT0 register (gyro & accel sensor mode, temp enabled) */ + val = INV_ICM42600_PWR_MGMT0_GYRO(conf->gyro.mode) | + INV_ICM42600_PWR_MGMT0_ACCEL(conf->accel.mode); + if (!conf->temp_en) + val |= INV_ICM42600_PWR_MGMT0_TEMP_DIS; + ret = regmap_write(st->map, INV_ICM42600_REG_PWR_MGMT0, val); + if (ret) + return ret; + + /* set GYRO_CONFIG0 register (gyro fullscale & odr) */ + val = INV_ICM42600_GYRO_CONFIG0_FS(conf->gyro.fs) | + INV_ICM42600_GYRO_CONFIG0_ODR(conf->gyro.odr); + ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_CONFIG0, val); + if (ret) + return ret; + + /* set ACCEL_CONFIG0 register (accel fullscale & odr) */ + val = INV_ICM42600_ACCEL_CONFIG0_FS(conf->accel.fs) | + INV_ICM42600_ACCEL_CONFIG0_ODR(conf->accel.odr); + ret = regmap_write(st->map, INV_ICM42600_REG_ACCEL_CONFIG0, val); + if (ret) + return ret; + + /* set GYRO_ACCEL_CONFIG0 register (gyro & accel filters) */ + val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(conf->accel.filter) | + INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(conf->gyro.filter); + ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val); + if (ret) + return ret; + + /* update internal conf */ + st->conf = *conf; + + return 0; +} + +/** + * inv_icm42600_setup() - check and setup chip + * @st: driver internal state + * @bus_setup: callback for setting up bus specific registers + * + * Returns 0 on success, a negative error code otherwise. + */ +static int inv_icm42600_setup(struct inv_icm42600_state *st, + inv_icm42600_bus_setup bus_setup) +{ + const struct inv_icm42600_hw *hw = &inv_icm42600_hw[st->chip]; + const struct device *dev = regmap_get_device(st->map); + unsigned int val; + int ret; + + /* check chip self-identification value */ + ret = regmap_read(st->map, INV_ICM42600_REG_WHOAMI, &val); + if (ret) + return ret; + if (val != hw->whoami) { + dev_err(dev, "invalid whoami %#02x expected %#02x (%s)\n", + val, hw->whoami, hw->name); + return -ENODEV; + } + st->name = hw->name; + + /* reset to make sure previous state are not there */ + ret = regmap_write(st->map, INV_ICM42600_REG_DEVICE_CONFIG, + INV_ICM42600_DEVICE_CONFIG_SOFT_RESET); + if (ret) + return ret; + msleep(INV_ICM42600_RESET_TIME_MS); + + ret = regmap_read(st->map, INV_ICM42600_REG_INT_STATUS, &val); + if (ret) + return ret; + if (!(val & INV_ICM42600_INT_STATUS_RESET_DONE)) { + dev_err(dev, "reset error, reset done bit not set\n"); + return -ENODEV; + } + + /* set chip bus configuration */ + ret = bus_setup(st); + if (ret) + return ret; + + /* sensor data in big-endian (default) */ + ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0, + INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN, + INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN); + if (ret) + return ret; + + return inv_icm42600_set_conf(st, hw->conf); +} + +static irqreturn_t inv_icm42600_irq_timestamp(int irq, void *_data) +{ + struct inv_icm42600_state *st = _data; + + st->timestamp.gyro = iio_get_time_ns(st->indio_gyro); + st->timestamp.accel = iio_get_time_ns(st->indio_accel); + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t inv_icm42600_irq_handler(int irq, void *_data) +{ + struct inv_icm42600_state *st = _data; + struct device *dev = regmap_get_device(st->map); + unsigned int status; + int ret; + + mutex_lock(&st->lock); + + ret = regmap_read(st->map, INV_ICM42600_REG_INT_STATUS, &status); + if (ret) + goto out_unlock; + + /* FIFO full */ + if (status & INV_ICM42600_INT_STATUS_FIFO_FULL) + dev_warn(dev, "FIFO full data lost!\n"); + + /* FIFO threshold reached */ + if (status & INV_ICM42600_INT_STATUS_FIFO_THS) { + ret = inv_icm42600_buffer_fifo_read(st, 0); + if (ret) { + dev_err(dev, "FIFO read error %d\n", ret); + goto out_unlock; + } + ret = inv_icm42600_buffer_fifo_parse(st); + if (ret) + dev_err(dev, "FIFO parsing error %d\n", ret); + } + +out_unlock: + mutex_unlock(&st->lock); + return IRQ_HANDLED; +} + +/** + * inv_icm42600_irq_init() - initialize int pin and interrupt handler + * @st: driver internal state + * @irq: irq number + * @irq_type: irq trigger type + * @open_drain: true if irq is open drain, false for push-pull + * + * Returns 0 on success, a negative error code otherwise. + */ +static int inv_icm42600_irq_init(struct inv_icm42600_state *st, int irq, + int irq_type, bool open_drain) +{ + struct device *dev = regmap_get_device(st->map); + unsigned int val; + int ret; + + /* configure INT1 interrupt: default is active low on edge */ + switch (irq_type) { + case IRQF_TRIGGER_RISING: + case IRQF_TRIGGER_HIGH: + val = INV_ICM42600_INT_CONFIG_INT1_ACTIVE_HIGH; + break; + default: + val = INV_ICM42600_INT_CONFIG_INT1_ACTIVE_LOW; + break; + } + + switch (irq_type) { + case IRQF_TRIGGER_LOW: + case IRQF_TRIGGER_HIGH: + val |= INV_ICM42600_INT_CONFIG_INT1_LATCHED; + break; + default: + break; + } + + if (!open_drain) + val |= INV_ICM42600_INT_CONFIG_INT1_PUSH_PULL; + + ret = regmap_write(st->map, INV_ICM42600_REG_INT_CONFIG, val); + if (ret) + return ret; + + /* Deassert async reset for proper INT pin operation (cf datasheet) */ + ret = regmap_update_bits(st->map, INV_ICM42600_REG_INT_CONFIG1, + INV_ICM42600_INT_CONFIG1_ASYNC_RESET, 0); + if (ret) + return ret; + + return devm_request_threaded_irq(dev, irq, inv_icm42600_irq_timestamp, + inv_icm42600_irq_handler, irq_type, + "inv_icm42600", st); +} + +static int inv_icm42600_timestamp_setup(struct inv_icm42600_state *st) +{ + unsigned int val; + + /* enable timestamp register */ + val = INV_ICM42600_TMST_CONFIG_TMST_TO_REGS_EN | + INV_ICM42600_TMST_CONFIG_TMST_EN; + return regmap_update_bits(st->map, INV_ICM42600_REG_TMST_CONFIG, + INV_ICM42600_TMST_CONFIG_MASK, val); +} + +static int inv_icm42600_enable_regulator_vddio(struct inv_icm42600_state *st) +{ + int ret; + + ret = regulator_enable(st->vddio_supply); + if (ret) + return ret; + + /* wait a little for supply ramp */ + usleep_range(3000, 4000); + + return 0; +} + +static void inv_icm42600_disable_vdd_reg(void *_data) +{ + struct inv_icm42600_state *st = _data; + const struct device *dev = regmap_get_device(st->map); + int ret; + + ret = regulator_disable(st->vdd_supply); + if (ret) + dev_err(dev, "failed to disable vdd error %d\n", ret); +} + +static void inv_icm42600_disable_vddio_reg(void *_data) +{ + struct inv_icm42600_state *st = _data; + const struct device *dev = regmap_get_device(st->map); + int ret; + + ret = regulator_disable(st->vddio_supply); + if (ret) + dev_err(dev, "failed to disable vddio error %d\n", ret); +} + +static void inv_icm42600_disable_pm(void *_data) +{ + struct device *dev = _data; + + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); +} + +int inv_icm42600_core_probe(struct regmap *regmap, int chip, int irq, + inv_icm42600_bus_setup bus_setup) +{ + struct device *dev = regmap_get_device(regmap); + struct inv_icm42600_state *st; + struct irq_data *irq_desc; + int irq_type; + bool open_drain; + int ret; + + if (chip <= INV_CHIP_INVALID || chip >= INV_CHIP_NB) { + dev_err(dev, "invalid chip = %d\n", chip); + return -ENODEV; + } + + /* get irq properties, set trigger falling by default */ + irq_desc = irq_get_irq_data(irq); + if (!irq_desc) { + dev_err(dev, "could not find IRQ %d\n", irq); + return -EINVAL; + } + + irq_type = irqd_get_trigger_type(irq_desc); + if (!irq_type) + irq_type = IRQF_TRIGGER_FALLING; + + open_drain = device_property_read_bool(dev, "drive-open-drain"); + + st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); + if (!st) + return -ENOMEM; + + dev_set_drvdata(dev, st); + mutex_init(&st->lock); + st->chip = chip; + st->map = regmap; + + ret = iio_read_mount_matrix(dev, &st->orientation); + if (ret) { + dev_err(dev, "failed to retrieve mounting matrix %d\n", ret); + return ret; + } + + st->vdd_supply = devm_regulator_get(dev, "vdd"); + if (IS_ERR(st->vdd_supply)) + return PTR_ERR(st->vdd_supply); + + st->vddio_supply = devm_regulator_get(dev, "vddio"); + if (IS_ERR(st->vddio_supply)) + return PTR_ERR(st->vddio_supply); + + ret = regulator_enable(st->vdd_supply); + if (ret) + return ret; + msleep(INV_ICM42600_POWER_UP_TIME_MS); + + ret = devm_add_action_or_reset(dev, inv_icm42600_disable_vdd_reg, st); + if (ret) + return ret; + + ret = inv_icm42600_enable_regulator_vddio(st); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, inv_icm42600_disable_vddio_reg, st); + if (ret) + return ret; + + /* setup chip registers */ + ret = inv_icm42600_setup(st, bus_setup); + if (ret) + return ret; + + ret = inv_icm42600_timestamp_setup(st); + if (ret) + return ret; + + ret = inv_icm42600_buffer_init(st); + if (ret) + return ret; + + st->indio_gyro = inv_icm42600_gyro_init(st); + if (IS_ERR(st->indio_gyro)) + return PTR_ERR(st->indio_gyro); + + st->indio_accel = inv_icm42600_accel_init(st); + if (IS_ERR(st->indio_accel)) + return PTR_ERR(st->indio_accel); + + ret = inv_icm42600_irq_init(st, irq, irq_type, open_drain); + if (ret) + return ret; + + /* setup runtime power management */ + ret = pm_runtime_set_active(dev); + if (ret) + return ret; + pm_runtime_get_noresume(dev); + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS); + pm_runtime_use_autosuspend(dev); + pm_runtime_put(dev); + + return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev); +} +EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, IIO_ICM42600); + +/* + * Suspend saves sensors state and turns everything off. + * Check first if runtime suspend has not already done the job. + */ +static int inv_icm42600_suspend(struct device *dev) +{ + struct inv_icm42600_state *st = dev_get_drvdata(dev); + int ret; + + mutex_lock(&st->lock); + + st->suspended.gyro = st->conf.gyro.mode; + st->suspended.accel = st->conf.accel.mode; + st->suspended.temp = st->conf.temp_en; + if (pm_runtime_suspended(dev)) { + ret = 0; + goto out_unlock; + } + + /* disable FIFO data streaming */ + if (st->fifo.on) { + ret = regmap_write(st->map, INV_ICM42600_REG_FIFO_CONFIG, + INV_ICM42600_FIFO_CONFIG_BYPASS); + if (ret) + goto out_unlock; + } + + ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF, + INV_ICM42600_SENSOR_MODE_OFF, false, + NULL); + if (ret) + goto out_unlock; + + regulator_disable(st->vddio_supply); + +out_unlock: + mutex_unlock(&st->lock); + return ret; +} + +/* + * System resume gets the system back on and restores the sensors state. + * Manually put runtime power management in system active state. + */ +static int inv_icm42600_resume(struct device *dev) +{ + struct inv_icm42600_state *st = dev_get_drvdata(dev); + int ret; + + mutex_lock(&st->lock); + + ret = inv_icm42600_enable_regulator_vddio(st); + if (ret) + goto out_unlock; + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + /* restore sensors state */ + ret = inv_icm42600_set_pwr_mgmt0(st, st->suspended.gyro, + st->suspended.accel, + st->suspended.temp, NULL); + if (ret) + goto out_unlock; + + /* restore FIFO data streaming */ + if (st->fifo.on) + ret = regmap_write(st->map, INV_ICM42600_REG_FIFO_CONFIG, + INV_ICM42600_FIFO_CONFIG_STREAM); + +out_unlock: + mutex_unlock(&st->lock); + return ret; +} + +/* Runtime suspend will turn off sensors that are enabled by iio devices. */ +static int inv_icm42600_runtime_suspend(struct device *dev) +{ + struct inv_icm42600_state *st = dev_get_drvdata(dev); + int ret; + + mutex_lock(&st->lock); + + /* disable all sensors */ + ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF, + INV_ICM42600_SENSOR_MODE_OFF, false, + NULL); + if (ret) + goto error_unlock; + + regulator_disable(st->vddio_supply); + +error_unlock: + mutex_unlock(&st->lock); + return ret; +} + +/* Sensors are enabled by iio devices, no need to turn them back on here. */ +static int inv_icm42600_runtime_resume(struct device *dev) +{ + struct inv_icm42600_state *st = dev_get_drvdata(dev); + int ret; + + mutex_lock(&st->lock); + + ret = inv_icm42600_enable_regulator_vddio(st); + + mutex_unlock(&st->lock); + return ret; +} + +EXPORT_NS_GPL_DEV_PM_OPS(inv_icm42600_pm_ops, IIO_ICM42600) = { + SYSTEM_SLEEP_PM_OPS(inv_icm42600_suspend, inv_icm42600_resume) + RUNTIME_PM_OPS(inv_icm42600_runtime_suspend, + inv_icm42600_runtime_resume, NULL) +}; + +MODULE_AUTHOR("InvenSense, Inc."); +MODULE_DESCRIPTION("InvenSense ICM-426xx device driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_INV_SENSORS_TIMESTAMP); |