diff options
Diffstat (limited to 'drivers/iio/light/Kconfig')
| -rw-r--r-- | drivers/iio/light/Kconfig | 660 |
1 files changed, 660 insertions, 0 deletions
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig new file mode 100644 index 0000000000..45edba797e --- /dev/null +++ b/drivers/iio/light/Kconfig @@ -0,0 +1,660 @@ +# SPDX-License-Identifier: GPL-2.0-only + +# +# Light sensors +# +# When adding new entries keep the list in alphabetical order + +menu "Light sensors" + +config ACPI_ALS + tristate "ACPI Ambient Light Sensor" + depends on ACPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IIO_KFIFO_BUF + help + Say Y here if you want to build a driver for the ACPI0008 + Ambient Light Sensor. + + To compile this driver as a module, choose M here: the module will + be called acpi-als. + +config ADJD_S311 + tristate "ADJD-S311-CR999 digital color sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on I2C + help + If you say yes here you get support for the Avago ADJD-S311-CR999 + digital color light sensor. + + This driver can also be built as a module. If so, the module + will be called adjd_s311. + +config ADUX1020 + tristate "ADUX1020 photometric sensor" + select REGMAP_I2C + depends on I2C + help + Say Y here if you want to build a driver for the Analog Devices + ADUX1020 photometric sensor. + + To compile this driver as a module, choose M here: the + module will be called adux1020. + +config AL3010 + tristate "AL3010 ambient light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Dyna Image AL3010 + ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called al3010. + +config AL3320A + tristate "AL3320A ambient light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Dyna Image AL3320A + ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called al3320a. + +config APDS9300 + tristate "APDS9300 ambient light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Avago APDS9300 + ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called apds9300. + +config APDS9960 + tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" + select REGMAP_I2C + select IIO_BUFFER + select IIO_KFIFO_BUF + depends on I2C + help + Say Y here to build I2C interface support for the Avago + APDS9960 gesture/RGB/ALS/proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called apds9960 + +config AS73211 + tristate "AMS AS73211 XYZ color sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for the AMS AS73211 + JENCOLOR(R) Digital XYZ Sensor. + + For triggered measurements, you will need an additional trigger driver + like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER. + + This driver can also be built as a module. If so, the module + will be called as73211. + +config BH1750 + tristate "ROHM BH1750 ambient light sensor" + depends on I2C + help + Say Y here to build support for the ROHM BH1710, BH1715, BH1721, + BH1750, BH1751 ambient light sensors. + + To compile this driver as a module, choose M here: the module will + be called bh1750. + +config BH1780 + tristate "ROHM BH1780 ambient light sensor" + depends on I2C + help + Say Y here to build support for the ROHM BH1780GLI ambient + light sensor. + + To compile this driver as a module, choose M here: the module will + be called bh1780. + +config CM32181 + depends on I2C + tristate "CM32181 driver" + help + Say Y here if you use cm32181. + This option enables ambient light sensor using + Capella cm32181 device driver. + + To compile this driver as a module, choose M here: + the module will be called cm32181. + +config CM3232 + depends on I2C + tristate "CM3232 ambient light sensor" + help + Say Y here if you use cm3232. + This option enables ambient light sensor using + Capella Microsystems cm3232 device driver. + + To compile this driver as a module, choose M here: + the module will be called cm3232. + +config CM3323 + depends on I2C + tristate "Capella CM3323 color light sensor" + help + Say Y here if you want to build a driver for Capella CM3323 + color sensor. + + To compile this driver as a module, choose M here: the module will + be called cm3323. + +config CM3605 + tristate "Capella CM3605 ambient light and proximity sensor" + help + Say Y here if you want to build a driver for Capella CM3605 + ambient light and short range proximity sensor. + + To compile this driver as a module, choose M here: the module will + be called cm3605. + +config CM36651 + depends on I2C + tristate "CM36651 driver" + help + Say Y here if you use cm36651. + This option enables proximity & RGB sensor using + Capella cm36651 device driver. + + To compile this driver as a module, choose M here: + the module will be called cm36651. + +config IIO_CROS_EC_LIGHT_PROX + tristate "ChromeOS EC Light and Proximity Sensors" + depends on IIO_CROS_EC_SENSORS_CORE + help + Say Y here if you use the light and proximity sensors + presented by the ChromeOS EC Sensor hub. + + To compile this driver as a module, choose M here: + the module will be called cros_ec_light_prox. + +config GP2AP002 + tristate "Sharp GP2AP002 Proximity/ALS sensor" + depends on I2C + select REGMAP + help + Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip + hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called gp2ap002. + +config GP2AP020A00F + tristate "Sharp GP2AP020A00F Proximity/ALS sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IRQ_WORK + help + Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip + hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called gp2ap020a00f. + +config IQS621_ALS + tristate "Azoteq IQS621/622 ambient light sensors" + depends on MFD_IQS62X || COMPILE_TEST + help + Say Y here if you want to build support for the Azoteq IQS621 + and IQS622 ambient light sensors. + + To compile this driver as a module, choose M here: the module + will be called iqs621-als. + +config SENSORS_ISL29018 + tristate "Intersil 29018 light and proximity sensor" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for ambient light sensing and + proximity infrared sensing from Intersil ISL29018. + This driver will provide the measurements of ambient light intensity + in lux, proximity infrared sensing and normal infrared sensing. + Data from sensor is accessible via sysfs. + +config SENSORS_ISL29028 + tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" + depends on I2C + select REGMAP_I2C + help + Provides driver for the Intersil's ISL29028 device. + This driver supports the sysfs interface to get the ALS, IR intensity, + Proximity value via iio. The ISL29028 provides the concurrent sensing + of ambient light and proximity. + +config ISL29125 + tristate "Intersil ISL29125 digital color light sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build a driver for the Intersil ISL29125 + RGB light sensor for I2C. + + To compile this driver as a module, choose M here: the module will be + called isl29125. + +config HID_SENSOR_ALS + depends on HID_SENSOR_HUB + select IIO_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID ALS" + help + Say yes here to build support for the HID SENSOR + Ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called hid-sensor-als. + +config HID_SENSOR_PROX + depends on HID_SENSOR_HUB + select IIO_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID PROX" + help + Say yes here to build support for the HID SENSOR + Proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called hid-sensor-prox. + +config JSA1212 + tristate "JSA1212 ALS and proximity sensor driver" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build a IIO driver for JSA1212 + proximity & ALS sensor device. + + To compile this driver as a module, choose M here: + the module will be called jsa1212. + +config ROHM_BU27008 + tristate "ROHM BU27008 color (RGB+C/IR) sensor" + depends on I2C + select REGMAP_I2C + select IIO_GTS_HELPER + help + Enable support for the ROHM BU27008 color sensor. + The ROHM BU27008 is a sensor with 5 photodiodes (red, green, + blue, clear and IR) with four configurable channels. Red and + green being always available and two out of the rest three + (blue, clear, IR) can be selected to be simultaneously measured. + Typical application is adjusting LCD backlight of TVs, + mobile phones and tablet PCs. + +config ROHM_BU27034 + tristate "ROHM BU27034 ambient light sensor" + depends on I2C + select REGMAP_I2C + select IIO_GTS_HELPER + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Enable support for the ROHM BU27034 ambient light sensor. ROHM BU27034 + is an ambient light sesnor with 3 channels and 3 photo diodes capable + of detecting a very wide range of illuminance. + Typical application is adjusting LCD and backlight power of TVs and + mobile phones. + +config RPR0521 + tristate "ROHM RPR0521 ALS and proximity sensor driver" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build support for ROHM's RPR0521 + ambient light and proximity sensor device. + + To compile this driver as a module, choose M here: + the module will be called rpr0521. + +config SENSORS_LM3533 + tristate "LM3533 ambient light sensor" + depends on MFD_LM3533 + help + If you say yes here you get support for the ambient light sensor + interface on National Semiconductor / TI LM3533 Lighting Power + chips. + + The sensor interface can be used to control the LEDs and backlights + of the chip through defining five light zones and three sets of + corresponding output-current values. + + The driver provides raw and mean adc readings along with the current + light zone through sysfs. A threshold event can be generated on zone + changes. The ALS-control output values can be set per zone for the + three current output channels. + +config LTR501 + tristate "LTR-501ALS-01 light sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for the Lite-On LTR-501ALS-01 + ambient light and proximity sensor. This driver also supports LTR-559 + ALS/PS or LTR-301 ALS sensors. + + This driver can also be built as a module. If so, the module + will be called ltr501. + +config LTRF216A + tristate "Liteon LTRF216A Light Sensor" + depends on I2C + select REGMAP_I2C + help + If you say Y or M here, you get support for Liteon LTRF216A + Ambient Light Sensor. + + If built as a dynamically linked module, it will be called + ltrf216a. + +config LV0104CS + tristate "LV0104CS Ambient Light Sensor" + depends on I2C + help + Say Y here if you want to build support for the On Semiconductor + LV0104CS ambient light sensor. + + To compile this driver as a module, choose M here: + the module will be called lv0104cs. + +config MAX44000 + tristate "MAX44000 Ambient and Infrared Proximity Sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build support for Maxim Integrated's + MAX44000 ambient and infrared proximity sensor device. + + To compile this driver as a module, choose M here: + the module will be called max44000. + +config MAX44009 + tristate "MAX44009 Ambient Light Sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build support for Maxim Integrated's + MAX44009 ambient light sensor device. + + To compile this driver as a module, choose M here: + the module will be called max44009. + +config NOA1305 + tristate "ON Semiconductor NOA1305 ambient light sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build support for the ON Semiconductor + NOA1305 ambient light sensor. + + To compile this driver as a module, choose M here: + The module will be called noa1305. + +config OPT3001 + tristate "Texas Instruments OPT3001 Light Sensor" + depends on I2C + help + If you say Y or M here, you get support for Texas Instruments + OPT3001 Ambient Light Sensor. + + If built as a dynamically linked module, it will be called + opt3001. + +config OPT4001 + tristate "Texas Instruments OPT4001 Light Sensor" + depends on I2C + select REGMAP_I2C + help + If you say Y or M here, you get support for Texas Instruments + OPT4001 Ambient Light Sensor. + + If built as a dynamically linked module, it will be called + opt4001. + +config PA12203001 + tristate "TXC PA12203001 light and proximity sensor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the TXC PA12203001 + ambient light and proximity sensor. + + This driver can also be built as a module. If so, the module + will be called pa12203001. + +config SI1133 + tristate "SI1133 UV Index Sensor and Ambient Light Sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build a driver for the Silicon Labs SI1133 + UV Index Sensor and Ambient Light Sensor chip. + + To compile this driver as a module, choose M here: the module will be + called si1133. + +config SI1145 + tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build a driver for the Silicon Labs SI1132 or + SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor + chips. + + To compile this driver as a module, choose M here: the module will be + called si1145. + +config STK3310 + tristate "STK3310 ALS and proximity sensor" + depends on I2C + select REGMAP_I2C + help + Say yes here to get support for the Sensortek STK3310 ambient light + and proximity sensor. The STK3311 model is also supported by this + driver. + + Choosing M will build the driver as a module. If so, the module + will be called stk3310. + +config ST_UVIS25 + tristate "STMicroelectronics UVIS25 sensor driver" + depends on (I2C || SPI) + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select ST_UVIS25_I2C if (I2C) + select ST_UVIS25_SPI if (SPI_MASTER) + help + Say yes here to build support for STMicroelectronics UVIS25 + uv sensor + + To compile this driver as a module, choose M here: the module + will be called st_uvis25. + +config ST_UVIS25_I2C + tristate + depends on ST_UVIS25 + select REGMAP_I2C + +config ST_UVIS25_SPI + tristate + depends on ST_UVIS25 + select REGMAP_SPI + +config TCS3414 + tristate "TAOS TCS3414 digital color sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for the TAOS TCS3414 + family of digital color sensors. + + This driver can also be built as a module. If so, the module + will be called tcs3414. + +config TCS3472 + tristate "TAOS TCS3472 color light-to-digital converter" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for the TAOS TCS3472 + family of color light-to-digital converters with IR filter. + + This driver can also be built as a module. If so, the module + will be called tcs3472. + +config SENSORS_TSL2563 + tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" + depends on I2C + help + If you say yes here you get support for the Taos TSL2560, + TSL2561, TSL2562 and TSL2563 ambient light sensors. + + This driver can also be built as a module. If so, the module + will be called tsl2563. + +config TSL2583 + tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" + depends on I2C + help + Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. + Access ALS data via iio, sysfs. + +config TSL2591 + tristate "TAOS TSL2591 ambient light sensor" + depends on I2C + help + Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor, + featuring channels for combined visible + IR intensity and lux illuminance. + Access data via iio and sysfs. Supports iio_events. + + To compile this driver as a module, select M: the + module will be called tsl2591. + +config TSL2772 + tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" + depends on I2C + help + Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, + tmd2672, tsl2772, tmd2772 devices. + Provides iio_events and direct access via sysfs. + +config TSL4531 + tristate "TAOS TSL4531 ambient light sensors" + depends on I2C + help + Say Y here if you want to build a driver for the TAOS TSL4531 family + of ambient light sensors with direct lux output. + + To compile this driver as a module, choose M here: the + module will be called tsl4531. + +config US5182D + tristate "UPISEMI light and proximity sensor" + depends on I2C + help + If you say yes here you get support for the UPISEMI US5182D + ambient light and proximity sensor. + + This driver can also be built as a module. If so, the module + will be called us5182d. + +config VCNL4000 + tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VCNL4000, + VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity + sensor. + + To compile this driver as a module, choose M here: the + module will be called vcnl4000. + +config VCNL4035 + tristate "VCNL4035 combined ALS and proximity sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VCNL4035, + combined ambient light (ALS) and proximity sensor. Currently only ALS + function is available. + + To compile this driver as a module, choose M here: the + module will be called vcnl4035. + +config VEML6030 + tristate "VEML6030 ambient light sensor" + select REGMAP_I2C + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML6030 + ambient light sensor (ALS). + + To compile this driver as a module, choose M here: the + module will be called veml6030. + +config VEML6070 + tristate "VEML6070 UV A light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML6070 UV A + light sensor. + + To compile this driver as a module, choose M here: the + module will be called veml6070. + +config VL6180 + tristate "VL6180 ALS, range and proximity sensor" + depends on I2C + help + Say Y here if you want to build a driver for the STMicroelectronics + VL6180 combined ambient light, range and proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called vl6180. + +config ZOPT2201 + tristate "ZOPT2201 ALS and UV B sensor" + depends on I2C + help + Say Y here if you want to build a driver for the IDT + ZOPT2201 ambient light and UV B sensor. + + To compile this driver as a module, choose M here: the + module will be called zopt2201. + +endmenu |