1 files changed, 873 insertions, 0 deletions

diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
new file mode 100644
index 0000000000..1a6f514bce
--- /dev/null
+++ b/drivers/iio/light/tsl2563.c
@@ -0,0 +1,873 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/iio/light/tsl2563.c
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Timo O. Karjalainen <timo.o.karjalainen@nokia.com>
+ * Contact: Amit Kucheria <amit.kucheria@verdurent.com>
+ *
+ * Converted to IIO driver
+ * Amit Kucheria <amit.kucheria@verdurent.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/math.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* Use this many bits for fraction part. */
+#define ADC_FRAC_BITS		14
+
+/* Given number of 1/10000's in ADC_FRAC_BITS precision. */
+#define FRAC10K(f)		(((f) * BIT(ADC_FRAC_BITS)) / (10000))
+
+/* Bits used for fraction in calibration coefficients.*/
+#define CALIB_FRAC_BITS		10
+/* Decimal 10^(digits in sysfs presentation) */
+#define CALIB_BASE_SYSFS	1000
+
+#define TSL2563_CMD		BIT(7)
+#define TSL2563_CLEARINT	BIT(6)
+
+#define TSL2563_REG_CTRL	0x00
+#define TSL2563_REG_TIMING	0x01
+#define TSL2563_REG_LOW		0x02 /* data0 low threshold, 2 bytes */
+#define TSL2563_REG_HIGH	0x04 /* data0 high threshold, 2 bytes */
+#define TSL2563_REG_INT		0x06
+#define TSL2563_REG_ID		0x0a
+#define TSL2563_REG_DATA0	0x0c /* broadband sensor value, 2 bytes */
+#define TSL2563_REG_DATA1	0x0e /* infrared sensor value, 2 bytes */
+
+#define TSL2563_CMD_POWER_ON	0x03
+#define TSL2563_CMD_POWER_OFF	0x00
+#define TSL2563_CTRL_POWER_MASK	GENMASK(1, 0)
+
+#define TSL2563_TIMING_13MS	0x00
+#define TSL2563_TIMING_100MS	0x01
+#define TSL2563_TIMING_400MS	0x02
+#define TSL2563_TIMING_MASK	GENMASK(1, 0)
+#define TSL2563_TIMING_GAIN16	0x10
+#define TSL2563_TIMING_GAIN1	0x00
+
+#define TSL2563_INT_DISABLED	0x00
+#define TSL2563_INT_LEVEL	0x10
+#define TSL2563_INT_MASK	GENMASK(5, 4)
+#define TSL2563_INT_PERSIST(n)	((n) & GENMASK(3, 0))
+
+struct tsl2563_gainlevel_coeff {
+	u8 gaintime;
+	u16 min;
+	u16 max;
+};
+
+static const struct tsl2563_gainlevel_coeff tsl2563_gainlevel_table[] = {
+	{
+		.gaintime	= TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN16,
+		.min		= 0,
+		.max		= 65534,
+	}, {
+		.gaintime	= TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN1,
+		.min		= 2048,
+		.max		= 65534,
+	}, {
+		.gaintime	= TSL2563_TIMING_100MS | TSL2563_TIMING_GAIN1,
+		.min		= 4095,
+		.max		= 37177,
+	}, {
+		.gaintime	= TSL2563_TIMING_13MS | TSL2563_TIMING_GAIN1,
+		.min		= 3000,
+		.max		= 65535,
+	},
+};
+
+struct tsl2563_chip {
+	struct mutex		lock;
+	struct i2c_client	*client;
+	struct delayed_work	poweroff_work;
+
+	/* Remember state for suspend and resume functions */
+	bool suspended;
+
+	struct tsl2563_gainlevel_coeff const *gainlevel;
+
+	u16			low_thres;
+	u16			high_thres;
+	u8			intr;
+	bool			int_enabled;
+
+	/* Calibration coefficients */
+	u32			calib0;
+	u32			calib1;
+	int			cover_comp_gain;
+
+	/* Cache current values, to be returned while suspended */
+	u32			data0;
+	u32			data1;
+};
+
+static int tsl2563_set_power(struct tsl2563_chip *chip, int on)
+{
+	struct i2c_client *client = chip->client;
+	u8 cmd;
+
+	cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF;
+	return i2c_smbus_write_byte_data(client,
+					 TSL2563_CMD | TSL2563_REG_CTRL, cmd);
+}
+
+/*
+ * Return value is 0 for off, 1 for on, or a negative error
+ * code if reading failed.
+ */
+static int tsl2563_get_power(struct tsl2563_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_CTRL);
+	if (ret < 0)
+		return ret;
+
+	return (ret & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON;
+}
+
+static int tsl2563_configure(struct tsl2563_chip *chip)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+			TSL2563_CMD | TSL2563_REG_TIMING,
+			chip->gainlevel->gaintime);
+	if (ret)
+		goto error_ret;
+	ret = i2c_smbus_write_word_data(chip->client,
+			TSL2563_CMD | TSL2563_REG_HIGH,
+			chip->high_thres);
+	if (ret)
+		goto error_ret;
+	ret = i2c_smbus_write_word_data(chip->client,
+			TSL2563_CMD | TSL2563_REG_LOW,
+			chip->low_thres);
+	if (ret)
+		goto error_ret;
+/*
+ * Interrupt register is automatically written anyway if it is relevant
+ * so is not here.
+ */
+error_ret:
+	return ret;
+}
+
+static void tsl2563_poweroff_work(struct work_struct *work)
+{
+	struct tsl2563_chip *chip =
+		container_of(work, struct tsl2563_chip, poweroff_work.work);
+	tsl2563_set_power(chip, 0);
+}
+
+static int tsl2563_detect(struct tsl2563_chip *chip)
+{
+	int ret;
+
+	ret = tsl2563_set_power(chip, 1);
+	if (ret)
+		return ret;
+
+	ret = tsl2563_get_power(chip);
+	if (ret < 0)
+		return ret;
+
+	return ret ? 0 : -ENODEV;
+}
+
+static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_ID);
+	if (ret < 0)
+		return ret;
+
+	*id = ret;
+
+	return 0;
+}
+
+static int tsl2563_configure_irq(struct tsl2563_chip *chip, bool enable)
+{
+	int ret;
+
+	chip->intr &= ~TSL2563_INT_MASK;
+	if (enable)
+		chip->intr |= TSL2563_INT_LEVEL;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2563_CMD | TSL2563_REG_INT,
+					chip->intr);
+	if (ret < 0)
+		return ret;
+
+	chip->int_enabled = enable;
+	return 0;
+}
+
+/*
+ * "Normalized" ADC value is one obtained with 400ms of integration time and
+ * 16x gain. This function returns the number of bits of shift needed to
+ * convert between normalized values and HW values obtained using given
+ * timing and gain settings.
+ */
+static int tsl2563_adc_shiftbits(u8 timing)
+{
+	int shift = 0;
+
+	switch (timing & TSL2563_TIMING_MASK) {
+	case TSL2563_TIMING_13MS:
+		shift += 5;
+		break;
+	case TSL2563_TIMING_100MS:
+		shift += 2;
+		break;
+	case TSL2563_TIMING_400MS:
+		/* no-op */
+		break;
+	}
+
+	if (!(timing & TSL2563_TIMING_GAIN16))
+		shift += 4;
+
+	return shift;
+}
+
+/* Convert a HW ADC value to normalized scale. */
+static u32 tsl2563_normalize_adc(u16 adc, u8 timing)
+{
+	return adc << tsl2563_adc_shiftbits(timing);
+}
+
+static void tsl2563_wait_adc(struct tsl2563_chip *chip)
+{
+	unsigned int delay;
+
+	switch (chip->gainlevel->gaintime & TSL2563_TIMING_MASK) {
+	case TSL2563_TIMING_13MS:
+		delay = 14;
+		break;
+	case TSL2563_TIMING_100MS:
+		delay = 101;
+		break;
+	default:
+		delay = 402;
+	}
+	/*
+	 * TODO: Make sure that we wait at least required delay but why we
+	 * have to extend it one tick more?
+	 */
+	schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2);
+}
+
+static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
+{
+	struct i2c_client *client = chip->client;
+
+	if (adc > chip->gainlevel->max || adc < chip->gainlevel->min) {
+
+		(adc > chip->gainlevel->max) ?
+			chip->gainlevel++ : chip->gainlevel--;
+
+		i2c_smbus_write_byte_data(client,
+					  TSL2563_CMD | TSL2563_REG_TIMING,
+					  chip->gainlevel->gaintime);
+
+		tsl2563_wait_adc(chip);
+		tsl2563_wait_adc(chip);
+
+		return 1;
+	} else
+		return 0;
+}
+
+static int tsl2563_get_adc(struct tsl2563_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	u16 adc0, adc1;
+	int retry = 1;
+	int ret = 0;
+
+	if (chip->suspended)
+		goto out;
+
+	if (!chip->int_enabled) {
+		cancel_delayed_work_sync(&chip->poweroff_work);
+
+		if (!tsl2563_get_power(chip)) {
+			ret = tsl2563_set_power(chip, 1);
+			if (ret)
+				goto out;
+			ret = tsl2563_configure(chip);
+			if (ret)
+				goto out;
+			tsl2563_wait_adc(chip);
+		}
+	}
+
+	while (retry) {
+		ret = i2c_smbus_read_word_data(client,
+				TSL2563_CMD | TSL2563_REG_DATA0);
+		if (ret < 0)
+			goto out;
+		adc0 = ret;
+
+		ret = i2c_smbus_read_word_data(client,
+				TSL2563_CMD | TSL2563_REG_DATA1);
+		if (ret < 0)
+			goto out;
+		adc1 = ret;
+
+		retry = tsl2563_adjust_gainlevel(chip, adc0);
+	}
+
+	chip->data0 = tsl2563_normalize_adc(adc0, chip->gainlevel->gaintime);
+	chip->data1 = tsl2563_normalize_adc(adc1, chip->gainlevel->gaintime);
+
+	if (!chip->int_enabled)
+		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+
+	ret = 0;
+out:
+	return ret;
+}
+
+static inline int tsl2563_calib_to_sysfs(u32 calib)
+{
+	return (int)DIV_ROUND_CLOSEST(calib * CALIB_BASE_SYSFS, BIT(CALIB_FRAC_BITS));
+}
+
+static inline u32 tsl2563_calib_from_sysfs(int value)
+{
+	/* Make a fraction from a number n that was multiplied with b. */
+	return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS;
+}
+
+/*
+ * Conversions between lux and ADC values.
+ *
+ * The basic formula is lux = c0 * adc0 - c1 * adc1, where c0 and c1 are
+ * appropriate constants. Different constants are needed for different
+ * kinds of light, determined by the ratio adc1/adc0 (basically the ratio
+ * of the intensities in infrared and visible wavelengths). lux_table below
+ * lists the upper threshold of the adc1/adc0 ratio and the corresponding
+ * constants.
+ */
+
+struct tsl2563_lux_coeff {
+	unsigned long ch_ratio;
+	unsigned long ch0_coeff;
+	unsigned long ch1_coeff;
+};
+
+static const struct tsl2563_lux_coeff lux_table[] = {
+	{
+		.ch_ratio	= FRAC10K(1300),
+		.ch0_coeff	= FRAC10K(315),
+		.ch1_coeff	= FRAC10K(262),
+	}, {
+		.ch_ratio	= FRAC10K(2600),
+		.ch0_coeff	= FRAC10K(337),
+		.ch1_coeff	= FRAC10K(430),
+	}, {
+		.ch_ratio	= FRAC10K(3900),
+		.ch0_coeff	= FRAC10K(363),
+		.ch1_coeff	= FRAC10K(529),
+	}, {
+		.ch_ratio	= FRAC10K(5200),
+		.ch0_coeff	= FRAC10K(392),
+		.ch1_coeff	= FRAC10K(605),
+	}, {
+		.ch_ratio	= FRAC10K(6500),
+		.ch0_coeff	= FRAC10K(229),
+		.ch1_coeff	= FRAC10K(291),
+	}, {
+		.ch_ratio	= FRAC10K(8000),
+		.ch0_coeff	= FRAC10K(157),
+		.ch1_coeff	= FRAC10K(180),
+	}, {
+		.ch_ratio	= FRAC10K(13000),
+		.ch0_coeff	= FRAC10K(34),
+		.ch1_coeff	= FRAC10K(26),
+	}, {
+		.ch_ratio	= ULONG_MAX,
+		.ch0_coeff	= 0,
+		.ch1_coeff	= 0,
+	},
+};
+
+/* Convert normalized, scaled ADC values to lux. */
+static unsigned int tsl2563_adc_to_lux(u32 adc0, u32 adc1)
+{
+	const struct tsl2563_lux_coeff *lp = lux_table;
+	unsigned long ratio, lux, ch0 = adc0, ch1 = adc1;
+
+	ratio = ch0 ? ((ch1 << ADC_FRAC_BITS) / ch0) : ULONG_MAX;
+
+	while (lp->ch_ratio < ratio)
+		lp++;
+
+	lux = ch0 * lp->ch0_coeff - ch1 * lp->ch1_coeff;
+
+	return (unsigned int) (lux >> ADC_FRAC_BITS);
+}
+
+/* Apply calibration coefficient to ADC count. */
+static u32 tsl2563_calib_adc(u32 adc, u32 calib)
+{
+	unsigned long scaled = adc;
+
+	scaled *= calib;
+	scaled >>= CALIB_FRAC_BITS;
+
+	return (u32) scaled;
+}
+
+static int tsl2563_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_CALIBSCALE)
+		return -EINVAL;
+	if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
+		chip->calib0 = tsl2563_calib_from_sysfs(val);
+	else if (chan->channel2 == IIO_MOD_LIGHT_IR)
+		chip->calib1 = tsl2563_calib_from_sysfs(val);
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int tsl2563_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val,
+			    int *val2,
+			    long mask)
+{
+	int ret = -EINVAL;
+	u32 calib0, calib1;
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+
+	mutex_lock(&chip->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = tsl2563_get_adc(chip);
+			if (ret)
+				goto error_ret;
+			calib0 = tsl2563_calib_adc(chip->data0, chip->calib0) *
+				chip->cover_comp_gain;
+			calib1 = tsl2563_calib_adc(chip->data1, chip->calib1) *
+				chip->cover_comp_gain;
+			*val = tsl2563_adc_to_lux(calib0, calib1);
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_INTENSITY:
+			ret = tsl2563_get_adc(chip);
+			if (ret)
+				goto error_ret;
+			if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
+				*val = chip->data0;
+			else
+				*val = chip->data1;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
+			*val = tsl2563_calib_to_sysfs(chip->calib0);
+		else
+			*val = tsl2563_calib_to_sysfs(chip->calib1);
+		ret = IIO_VAL_INT;
+		break;
+	default:
+		ret = -EINVAL;
+		goto error_ret;
+	}
+
+error_ret:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static const struct iio_event_spec tsl2563_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec tsl2563_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.indexed = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.channel = 0,
+	}, {
+		.type = IIO_INTENSITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE),
+		.event_spec = tsl2563_events,
+		.num_event_specs = ARRAY_SIZE(tsl2563_events),
+	}, {
+		.type = IIO_INTENSITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE),
+	}
+};
+
+static int tsl2563_read_thresh(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, enum iio_event_info info, int *val,
+	int *val2)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		*val = chip->high_thres;
+		break;
+	case IIO_EV_DIR_FALLING:
+		*val = chip->low_thres;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static int tsl2563_write_thresh(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, enum iio_event_info info, int val,
+	int val2)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	if (dir == IIO_EV_DIR_RISING)
+		ret = i2c_smbus_write_word_data(chip->client,
+						TSL2563_CMD | TSL2563_REG_HIGH, val);
+	else
+		ret = i2c_smbus_write_word_data(chip->client,
+						TSL2563_CMD | TSL2563_REG_LOW, val);
+	if (ret)
+		goto error_ret;
+
+	if (dir == IIO_EV_DIR_RISING)
+		chip->high_thres = val;
+	else
+		chip->low_thres = val;
+
+error_ret:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static irqreturn_t tsl2563_event_handler(int irq, void *private)
+{
+	struct iio_dev *dev_info = private;
+	struct tsl2563_chip *chip = iio_priv(dev_info);
+
+	iio_push_event(dev_info,
+		       IIO_UNMOD_EVENT_CODE(IIO_INTENSITY,
+					    0,
+					    IIO_EV_TYPE_THRESH,
+					    IIO_EV_DIR_EITHER),
+		       iio_get_time_ns(dev_info));
+
+	/* clear the interrupt and push the event */
+	i2c_smbus_write_byte(chip->client, TSL2563_CMD | TSL2563_CLEARINT);
+	return IRQ_HANDLED;
+}
+
+static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir, int state)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+	int ret = 0;
+
+	mutex_lock(&chip->lock);
+	if (state && !(chip->intr & TSL2563_INT_MASK)) {
+		/* ensure the chip is actually on */
+		cancel_delayed_work_sync(&chip->poweroff_work);
+		if (!tsl2563_get_power(chip)) {
+			ret = tsl2563_set_power(chip, 1);
+			if (ret)
+				goto out;
+			ret = tsl2563_configure(chip);
+			if (ret)
+				goto out;
+		}
+		ret = tsl2563_configure_irq(chip, true);
+	}
+
+	if (!state && (chip->intr & TSL2563_INT_MASK)) {
+		ret = tsl2563_configure_irq(chip, false);
+		/* now the interrupt is not enabled, we can go to sleep */
+		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+	}
+out:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, enum iio_event_type type,
+	enum iio_event_direction dir)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = i2c_smbus_read_byte_data(chip->client,
+				       TSL2563_CMD | TSL2563_REG_INT);
+	mutex_unlock(&chip->lock);
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & TSL2563_INT_MASK);
+}
+
+static const struct iio_info tsl2563_info_no_irq = {
+	.read_raw = &tsl2563_read_raw,
+	.write_raw = &tsl2563_write_raw,
+};
+
+static const struct iio_info tsl2563_info = {
+	.read_raw = &tsl2563_read_raw,
+	.write_raw = &tsl2563_write_raw,
+	.read_event_value = &tsl2563_read_thresh,
+	.write_event_value = &tsl2563_write_thresh,
+	.read_event_config = &tsl2563_read_interrupt_config,
+	.write_event_config = &tsl2563_write_interrupt_config,
+};
+
+static int tsl2563_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct tsl2563_chip *chip;
+	unsigned long irq_flags;
+	u8 id = 0;
+	int err;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	chip->client = client;
+
+	err = tsl2563_detect(chip);
+	if (err)
+		return dev_err_probe(dev, err, "detect error\n");
+
+	err = tsl2563_read_id(chip, &id);
+	if (err)
+		return dev_err_probe(dev, err, "read id error\n");
+
+	mutex_init(&chip->lock);
+
+	/* Default values used until userspace says otherwise */
+	chip->low_thres = 0x0;
+	chip->high_thres = 0xffff;
+	chip->gainlevel = tsl2563_gainlevel_table;
+	chip->intr = TSL2563_INT_PERSIST(4);
+	chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
+	chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
+
+	chip->cover_comp_gain = 1;
+	device_property_read_u32(dev, "amstaos,cover-comp-gain", &chip->cover_comp_gain);
+
+	dev_info(dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
+	indio_dev->name = client->name;
+	indio_dev->channels = tsl2563_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tsl2563_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	if (client->irq)
+		indio_dev->info = &tsl2563_info;
+	else
+		indio_dev->info = &tsl2563_info_no_irq;
+
+	if (client->irq) {
+		irq_flags = irq_get_trigger_type(client->irq);
+		if (irq_flags == IRQF_TRIGGER_NONE)
+			irq_flags = IRQF_TRIGGER_RISING;
+		irq_flags |= IRQF_ONESHOT;
+
+		err = devm_request_threaded_irq(dev, client->irq,
+					   NULL,
+					   &tsl2563_event_handler,
+					   irq_flags,
+					   "tsl2563_event",
+					   indio_dev);
+		if (err)
+			return dev_err_probe(dev, err, "irq request error\n");
+	}
+
+	err = tsl2563_configure(chip);
+	if (err)
+		return dev_err_probe(dev, err, "configure error\n");
+
+	INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work);
+
+	/* The interrupt cannot yet be enabled so this is fine without lock */
+	schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+
+	err = iio_device_register(indio_dev);
+	if (err) {
+		dev_err_probe(dev, err, "iio registration error\n");
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	cancel_delayed_work_sync(&chip->poweroff_work);
+	return err;
+}
+
+static void tsl2563_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	if (!chip->int_enabled)
+		cancel_delayed_work_sync(&chip->poweroff_work);
+	/* Ensure that interrupts are disabled - then flush any bottom halves */
+	tsl2563_configure_irq(chip, false);
+	tsl2563_set_power(chip, 0);
+}
+
+static int tsl2563_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = tsl2563_set_power(chip, 0);
+	if (ret)
+		goto out;
+
+	chip->suspended = true;
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int tsl2563_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = tsl2563_set_power(chip, 1);
+	if (ret)
+		goto out;
+
+	ret = tsl2563_configure(chip);
+	if (ret)
+		goto out;
+
+	chip->suspended = false;
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(tsl2563_pm_ops, tsl2563_suspend,
+				tsl2563_resume);
+
+static const struct i2c_device_id tsl2563_id[] = {
+	{ "tsl2560", 0 },
+	{ "tsl2561", 1 },
+	{ "tsl2562", 2 },
+	{ "tsl2563", 3 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, tsl2563_id);
+
+static const struct of_device_id tsl2563_of_match[] = {
+	{ .compatible = "amstaos,tsl2560" },
+	{ .compatible = "amstaos,tsl2561" },
+	{ .compatible = "amstaos,tsl2562" },
+	{ .compatible = "amstaos,tsl2563" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, tsl2563_of_match);
+
+static struct i2c_driver tsl2563_i2c_driver = {
+	.driver = {
+		.name	 = "tsl2563",
+		.of_match_table = tsl2563_of_match,
+		.pm	= pm_sleep_ptr(&tsl2563_pm_ops),
+	},
+	.probe		= tsl2563_probe,
+	.remove		= tsl2563_remove,
+	.id_table	= tsl2563_id,
+};
+module_i2c_driver(tsl2563_i2c_driver);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("tsl2563 light sensor driver");
+MODULE_LICENSE("GPL");