diff options
Diffstat (limited to '')
26 files changed, 10553 insertions, 0 deletions
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig new file mode 100644 index 0000000000..38532d840f --- /dev/null +++ b/drivers/iio/magnetometer/Kconfig @@ -0,0 +1,238 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Magnetometer sensors +# +# When adding new entries keep the list in alphabetical order + +menu "Magnetometer sensors" + +config AK8974 + tristate "Asahi Kasei AK8974 3-Axis Magnetometer" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Asahi Kasei AK8974, AMI305 or + AMI306 I2C-based 3-axis magnetometer chips. + + To compile this driver as a module, choose M here: the module + will be called ak8974. + +config AK8975 + tristate "Asahi Kasei AK8975 3-Axis Magnetometer" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Asahi Kasei AK8975, AK8963, + AK09911, AK09912 or AK09916 3-Axis Magnetometer. + + To compile this driver as a module, choose M here: the module + will be called ak8975. + +config AK09911 + tristate "Asahi Kasei AK09911 3-axis Compass" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select AK8975 + help + Deprecated: AK09911 is now supported by AK8975 driver. + +config BMC150_MAGN + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config BMC150_MAGN_I2C + tristate "Bosch BMC150 I2C Magnetometer Driver" + depends on I2C + select BMC150_MAGN + select REGMAP_I2C + help + Say yes here to build support for the BMC150 magnetometer with + I2C interface. + + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing magnetometer part, which has + its own address and register map. + + This driver also supports I2C Bosch BMC156 and BMM150 chips. + To compile this driver as a module, choose M here: the module will be + called bmc150_magn_i2c. + +config BMC150_MAGN_SPI + tristate "Bosch BMC150 SPI Magnetometer Driver" + depends on SPI + select BMC150_MAGN + select REGMAP_SPI + help + Say yes here to build support for the BMC150 magnetometer with + SPI interface. + + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing magnetometer part, which has + its own address and register map. + + This driver also supports SPI Bosch BMC156 and BMM150 chips. + To compile this driver as a module, choose M here: the module will be + called bmc150_magn_spi. + +config MAG3110 + tristate "Freescale MAG3110 3-Axis Magnetometer" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the Freescale MAG3110 3-Axis + magnetometer. + + To compile this driver as a module, choose M here: the module + will be called mag3110. + +config HID_SENSOR_MAGNETOMETER_3D + depends on HID_SENSOR_HUB + select IIO_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID Magenetometer 3D" + help + Say yes here to build support for the HID SENSOR + Magnetometer 3D. + +config MMC35240 + tristate "MEMSIC MMC35240 3-axis magnetic sensor" + select REGMAP_I2C + depends on I2C + help + Say yes here to build support for the MEMSIC MMC35240 3-axis + magnetic sensor. + + To compile this driver as a module, choose M here: the module + will be called mmc35240. + +config IIO_ST_MAGN_3AXIS + tristate "STMicroelectronics magnetometers 3-Axis Driver" + depends on (I2C || SPI_MASTER) && SYSFS + select IIO_ST_SENSORS_CORE + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + help + Say yes here to build support for STMicroelectronics magnetometers: + LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL. + + Also need to enable at least one of I2C and SPI interface drivers + below. + +config IIO_ST_MAGN_I2C_3AXIS + tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" + depends on I2C && IIO_ST_MAGN_3AXIS + default I2C && IIO_ST_MAGN_3AXIS + select IIO_ST_SENSORS_I2C + help + Build support for STMicroelectronics magnetometers I2C interface. + + To compile this driver as a module, choose M here. The module + will be called st_magn_i2c. + +config IIO_ST_MAGN_SPI_3AXIS + tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" + depends on SPI_MASTER && IIO_ST_MAGN_3AXIS + default SPI_MASTER && IIO_ST_MAGN_3AXIS + select IIO_ST_SENSORS_SPI + help + Build support for STMicroelectronics magnetometers SPI interface. + + To compile this driver as a module, choose M here. The module + will be called st_magn_spi. + +config SENSORS_HMC5843 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config SENSORS_HMC5843_I2C + tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" + depends on I2C + select SENSORS_HMC5843 + select REGMAP_I2C + help + Say Y here to add support for the Honeywell HMC5843, HMC5883 and + HMC5883L 3-Axis Magnetometer (digital compass). + + This driver can also be compiled as a set of modules. + If so, these modules will be created: + - hmc5843_core (core functions) + - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) + +config SENSORS_HMC5843_SPI + tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" + depends on SPI_MASTER + select SENSORS_HMC5843 + select REGMAP_SPI + help + Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer + (digital compass). + + This driver can also be compiled as a set of modules. + If so, these modules will be created: + - hmc5843_core (core functions) + - hmc5843_spi (support for HMC5983) + +config SENSORS_RM3100 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config SENSORS_RM3100_I2C + tristate "PNI RM3100 3-Axis Magnetometer (I2C)" + depends on I2C + select SENSORS_RM3100 + select REGMAP_I2C + help + Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. + + This driver can also be compiled as a module. + To compile this driver as a module, choose M here: the module + will be called rm3100-i2c. + +config SENSORS_RM3100_SPI + tristate "PNI RM3100 3-Axis Magnetometer (SPI)" + depends on SPI_MASTER + select SENSORS_RM3100 + select REGMAP_SPI + help + Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. + + This driver can also be compiled as a module. + To compile this driver as a module, choose M here: the module + will be called rm3100-spi. + +config TI_TMAG5273 + tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here to add support for the TI TMAG5273 Low-Power + Linear 3D Hall-Effect Sensor. + + This driver can also be compiled as a module. + To compile this driver as a module, choose M here: the module + will be called tmag5273. + +config YAMAHA_YAS530 + tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to add support for the Yamaha YAS530 series of + 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are + supported. + + This driver can also be compiled as a module. + To compile this driver as a module, choose M here: the module + will be called yamaha-yas. + +endmenu diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile new file mode 100644 index 0000000000..b1c784ea71 --- /dev/null +++ b/drivers/iio/magnetometer/Makefile @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for industrial I/O Magnetometer sensor drivers +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_AK8974) += ak8974.o +obj-$(CONFIG_AK8975) += ak8975.o +obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o +obj-$(CONFIG_BMC150_MAGN_I2C) += bmc150_magn_i2c.o +obj-$(CONFIG_BMC150_MAGN_SPI) += bmc150_magn_spi.o + +obj-$(CONFIG_MAG3110) += mag3110.o +obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o +obj-$(CONFIG_MMC35240) += mmc35240.o + +obj-$(CONFIG_IIO_ST_MAGN_3AXIS) += st_magn.o +st_magn-y := st_magn_core.o +st_magn-$(CONFIG_IIO_BUFFER) += st_magn_buffer.o + +obj-$(CONFIG_IIO_ST_MAGN_I2C_3AXIS) += st_magn_i2c.o +obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o + +obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o +obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o +obj-$(CONFIG_SENSORS_HMC5843_SPI) += hmc5843_spi.o + +obj-$(CONFIG_SENSORS_RM3100) += rm3100-core.o +obj-$(CONFIG_SENSORS_RM3100_I2C) += rm3100-i2c.o +obj-$(CONFIG_SENSORS_RM3100_SPI) += rm3100-spi.o + +obj-$(CONFIG_TI_TMAG5273) += tmag5273.o + +obj-$(CONFIG_YAMAHA_YAS530) += yamaha-yas530.o diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c new file mode 100644 index 0000000000..c74d11943e --- /dev/null +++ b/drivers/iio/magnetometer/ak8974.c @@ -0,0 +1,1058 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for the Asahi Kasei EMD Corporation AK8974 + * and Aichi Steel AMI305 magnetometer chips. + * Based on a patch from Samu Onkalo and the AK8975 IIO driver. + * + * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). + * Copyright (c) 2010 NVIDIA Corporation. + * Copyright (C) 2016 Linaro Ltd. + * + * Author: Samu Onkalo <samu.p.onkalo@nokia.com> + * Author: Linus Walleij <linus.walleij@linaro.org> + */ +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> /* For irq_get_irq_data() */ +#include <linux/completion.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/random.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +/* + * 16-bit registers are little-endian. LSB is at the address defined below + * and MSB is at the next higher address. + */ + +/* These registers are common for AK8974 and AMI30x */ +#define AK8974_SELFTEST 0x0C +#define AK8974_SELFTEST_IDLE 0x55 +#define AK8974_SELFTEST_OK 0xAA + +#define AK8974_INFO 0x0D + +#define AK8974_WHOAMI 0x0F +#define AK8974_WHOAMI_VALUE_AMI306 0x46 +#define AK8974_WHOAMI_VALUE_AMI305 0x47 +#define AK8974_WHOAMI_VALUE_AK8974 0x48 +#define AK8974_WHOAMI_VALUE_HSCDTD008A 0x49 + +#define AK8974_DATA_X 0x10 +#define AK8974_DATA_Y 0x12 +#define AK8974_DATA_Z 0x14 +#define AK8974_INT_SRC 0x16 +#define AK8974_STATUS 0x18 +#define AK8974_INT_CLEAR 0x1A +#define AK8974_CTRL1 0x1B +#define AK8974_CTRL2 0x1C +#define AK8974_CTRL3 0x1D +#define AK8974_INT_CTRL 0x1E +#define AK8974_INT_THRES 0x26 /* Absolute any axis value threshold */ +#define AK8974_PRESET 0x30 + +/* AK8974-specific offsets */ +#define AK8974_OFFSET_X 0x20 +#define AK8974_OFFSET_Y 0x22 +#define AK8974_OFFSET_Z 0x24 +/* AMI305-specific offsets */ +#define AMI305_OFFSET_X 0x6C +#define AMI305_OFFSET_Y 0x72 +#define AMI305_OFFSET_Z 0x78 + +/* Different temperature registers */ +#define AK8974_TEMP 0x31 +#define AMI305_TEMP 0x60 + +/* AMI306-specific control register */ +#define AMI306_CTRL4 0x5C + +/* AMI306 factory calibration data */ + +/* fine axis sensitivity */ +#define AMI306_FINEOUTPUT_X 0x90 +#define AMI306_FINEOUTPUT_Y 0x92 +#define AMI306_FINEOUTPUT_Z 0x94 + +/* axis sensitivity */ +#define AMI306_SENS_X 0x96 +#define AMI306_SENS_Y 0x98 +#define AMI306_SENS_Z 0x9A + +/* axis cross-interference */ +#define AMI306_GAIN_PARA_XZ 0x9C +#define AMI306_GAIN_PARA_XY 0x9D +#define AMI306_GAIN_PARA_YZ 0x9E +#define AMI306_GAIN_PARA_YX 0x9F +#define AMI306_GAIN_PARA_ZY 0xA0 +#define AMI306_GAIN_PARA_ZX 0xA1 + +/* offset at ZERO magnetic field */ +#define AMI306_OFFZERO_X 0xF8 +#define AMI306_OFFZERO_Y 0xFA +#define AMI306_OFFZERO_Z 0xFC + + +#define AK8974_INT_X_HIGH BIT(7) /* Axis over +threshold */ +#define AK8974_INT_Y_HIGH BIT(6) +#define AK8974_INT_Z_HIGH BIT(5) +#define AK8974_INT_X_LOW BIT(4) /* Axis below -threshold */ +#define AK8974_INT_Y_LOW BIT(3) +#define AK8974_INT_Z_LOW BIT(2) +#define AK8974_INT_RANGE BIT(1) /* Range overflow (any axis) */ + +#define AK8974_STATUS_DRDY BIT(6) /* Data ready */ +#define AK8974_STATUS_OVERRUN BIT(5) /* Data overrun */ +#define AK8974_STATUS_INT BIT(4) /* Interrupt occurred */ + +#define AK8974_CTRL1_POWER BIT(7) /* 0 = standby; 1 = active */ +#define AK8974_CTRL1_RATE BIT(4) /* 0 = 10 Hz; 1 = 20 Hz */ +#define AK8974_CTRL1_FORCE_EN BIT(1) /* 0 = normal; 1 = force */ +#define AK8974_CTRL1_MODE2 BIT(0) /* 0 */ + +#define AK8974_CTRL2_INT_EN BIT(4) /* 1 = enable interrupts */ +#define AK8974_CTRL2_DRDY_EN BIT(3) /* 1 = enable data ready signal */ +#define AK8974_CTRL2_DRDY_POL BIT(2) /* 1 = data ready active high */ +#define AK8974_CTRL2_RESDEF (AK8974_CTRL2_DRDY_POL) + +#define AK8974_CTRL3_RESET BIT(7) /* Software reset */ +#define AK8974_CTRL3_FORCE BIT(6) /* Start forced measurement */ +#define AK8974_CTRL3_SELFTEST BIT(4) /* Set selftest register */ +#define AK8974_CTRL3_RESDEF 0x00 + +#define AK8974_INT_CTRL_XEN BIT(7) /* Enable interrupt for this axis */ +#define AK8974_INT_CTRL_YEN BIT(6) +#define AK8974_INT_CTRL_ZEN BIT(5) +#define AK8974_INT_CTRL_XYZEN (BIT(7)|BIT(6)|BIT(5)) +#define AK8974_INT_CTRL_POL BIT(3) /* 0 = active low; 1 = active high */ +#define AK8974_INT_CTRL_PULSE BIT(1) /* 0 = latched; 1 = pulse (50 usec) */ +#define AK8974_INT_CTRL_RESDEF (AK8974_INT_CTRL_XYZEN | AK8974_INT_CTRL_POL) + +/* HSCDTD008A-specific control register */ +#define HSCDTD008A_CTRL4 0x1E +#define HSCDTD008A_CTRL4_MMD BIT(7) /* must be set to 1 */ +#define HSCDTD008A_CTRL4_RANGE BIT(4) /* 0 = 14-bit output; 1 = 15-bit output */ +#define HSCDTD008A_CTRL4_RESDEF (HSCDTD008A_CTRL4_MMD | HSCDTD008A_CTRL4_RANGE) + +/* The AMI305 has elaborate FW version and serial number registers */ +#define AMI305_VER 0xE8 +#define AMI305_SN 0xEA + +#define AK8974_MAX_RANGE 2048 + +#define AK8974_POWERON_DELAY 50 +#define AK8974_ACTIVATE_DELAY 1 +#define AK8974_SELFTEST_DELAY 1 +/* + * Set the autosuspend to two orders of magnitude larger than the poweron + * delay to make sane reasonable power tradeoff savings (5 seconds in + * this case). + */ +#define AK8974_AUTOSUSPEND_DELAY 5000 + +#define AK8974_MEASTIME 3 + +#define AK8974_PWR_ON 1 +#define AK8974_PWR_OFF 0 + +/** + * struct ak8974 - state container for the AK8974 driver + * @i2c: parent I2C client + * @orientation: mounting matrix, flipped axis etc + * @map: regmap to access the AK8974 registers over I2C + * @regs: the avdd and dvdd power regulators + * @name: the name of the part + * @variant: the whoami ID value (for selecting code paths) + * @lock: locks the magnetometer for exclusive use during a measurement + * @drdy_irq: uses the DRDY IRQ line + * @drdy_complete: completion for DRDY + * @drdy_active_low: the DRDY IRQ is active low + * @scan: timestamps + */ +struct ak8974 { + struct i2c_client *i2c; + struct iio_mount_matrix orientation; + struct regmap *map; + struct regulator_bulk_data regs[2]; + const char *name; + u8 variant; + struct mutex lock; + bool drdy_irq; + struct completion drdy_complete; + bool drdy_active_low; + /* Ensure timestamp is naturally aligned */ + struct { + __le16 channels[3]; + s64 ts __aligned(8); + } scan; +}; + +static const char ak8974_reg_avdd[] = "avdd"; +static const char ak8974_reg_dvdd[] = "dvdd"; + +static int ak8974_get_u16_val(struct ak8974 *ak8974, u8 reg, u16 *val) +{ + int ret; + __le16 bulk; + + ret = regmap_bulk_read(ak8974->map, reg, &bulk, 2); + if (ret) + return ret; + *val = le16_to_cpu(bulk); + + return 0; +} + +static int ak8974_set_u16_val(struct ak8974 *ak8974, u8 reg, u16 val) +{ + __le16 bulk = cpu_to_le16(val); + + return regmap_bulk_write(ak8974->map, reg, &bulk, 2); +} + +static int ak8974_set_power(struct ak8974 *ak8974, bool mode) +{ + int ret; + u8 val; + + val = mode ? AK8974_CTRL1_POWER : 0; + val |= AK8974_CTRL1_FORCE_EN; + ret = regmap_write(ak8974->map, AK8974_CTRL1, val); + if (ret < 0) + return ret; + + if (mode) + msleep(AK8974_ACTIVATE_DELAY); + + return 0; +} + +static int ak8974_reset(struct ak8974 *ak8974) +{ + int ret; + + /* Power on to get register access. Sets CTRL1 reg to reset state */ + ret = ak8974_set_power(ak8974, AK8974_PWR_ON); + if (ret) + return ret; + ret = regmap_write(ak8974->map, AK8974_CTRL2, AK8974_CTRL2_RESDEF); + if (ret) + return ret; + ret = regmap_write(ak8974->map, AK8974_CTRL3, AK8974_CTRL3_RESDEF); + if (ret) + return ret; + if (ak8974->variant != AK8974_WHOAMI_VALUE_HSCDTD008A) { + ret = regmap_write(ak8974->map, AK8974_INT_CTRL, + AK8974_INT_CTRL_RESDEF); + if (ret) + return ret; + } else { + ret = regmap_write(ak8974->map, HSCDTD008A_CTRL4, + HSCDTD008A_CTRL4_RESDEF); + if (ret) + return ret; + } + + /* After reset, power off is default state */ + return ak8974_set_power(ak8974, AK8974_PWR_OFF); +} + +static int ak8974_configure(struct ak8974 *ak8974) +{ + int ret; + + ret = regmap_write(ak8974->map, AK8974_CTRL2, AK8974_CTRL2_DRDY_EN | + AK8974_CTRL2_INT_EN); + if (ret) + return ret; + ret = regmap_write(ak8974->map, AK8974_CTRL3, 0); + if (ret) + return ret; + if (ak8974->variant == AK8974_WHOAMI_VALUE_AMI306) { + /* magic from datasheet: set high-speed measurement mode */ + ret = ak8974_set_u16_val(ak8974, AMI306_CTRL4, 0xA07E); + if (ret) + return ret; + } + if (ak8974->variant == AK8974_WHOAMI_VALUE_HSCDTD008A) + return 0; + ret = regmap_write(ak8974->map, AK8974_INT_CTRL, AK8974_INT_CTRL_POL); + if (ret) + return ret; + + return regmap_write(ak8974->map, AK8974_PRESET, 0); +} + +static int ak8974_trigmeas(struct ak8974 *ak8974) +{ + unsigned int clear; + u8 mask; + u8 val; + int ret; + + /* Clear any previous measurement overflow status */ + ret = regmap_read(ak8974->map, AK8974_INT_CLEAR, &clear); + if (ret) + return ret; + + /* If we have a DRDY IRQ line, use it */ + if (ak8974->drdy_irq) { + mask = AK8974_CTRL2_INT_EN | + AK8974_CTRL2_DRDY_EN | + AK8974_CTRL2_DRDY_POL; + val = AK8974_CTRL2_DRDY_EN; + + if (!ak8974->drdy_active_low) + val |= AK8974_CTRL2_DRDY_POL; + + init_completion(&ak8974->drdy_complete); + ret = regmap_update_bits(ak8974->map, AK8974_CTRL2, + mask, val); + if (ret) + return ret; + } + + /* Force a measurement */ + return regmap_update_bits(ak8974->map, + AK8974_CTRL3, + AK8974_CTRL3_FORCE, + AK8974_CTRL3_FORCE); +} + +static int ak8974_await_drdy(struct ak8974 *ak8974) +{ + int timeout = 2; + unsigned int val; + int ret; + + if (ak8974->drdy_irq) { + ret = wait_for_completion_timeout(&ak8974->drdy_complete, + 1 + msecs_to_jiffies(1000)); + if (!ret) { + dev_err(&ak8974->i2c->dev, + "timeout waiting for DRDY IRQ\n"); + return -ETIMEDOUT; + } + return 0; + } + + /* Default delay-based poll loop */ + do { + msleep(AK8974_MEASTIME); + ret = regmap_read(ak8974->map, AK8974_STATUS, &val); + if (ret < 0) + return ret; + if (val & AK8974_STATUS_DRDY) + return 0; + } while (--timeout); + + dev_err(&ak8974->i2c->dev, "timeout waiting for DRDY\n"); + return -ETIMEDOUT; +} + +static int ak8974_getresult(struct ak8974 *ak8974, __le16 *result) +{ + unsigned int src; + int ret; + + ret = ak8974_await_drdy(ak8974); + if (ret) + return ret; + ret = regmap_read(ak8974->map, AK8974_INT_SRC, &src); + if (ret < 0) + return ret; + + /* Out of range overflow! Strong magnet close? */ + if (src & AK8974_INT_RANGE) { + dev_err(&ak8974->i2c->dev, + "range overflow in sensor\n"); + return -ERANGE; + } + + ret = regmap_bulk_read(ak8974->map, AK8974_DATA_X, result, 6); + if (ret) + return ret; + + return ret; +} + +static irqreturn_t ak8974_drdy_irq(int irq, void *d) +{ + struct ak8974 *ak8974 = d; + + if (!ak8974->drdy_irq) + return IRQ_NONE; + + /* TODO: timestamp here to get good measurement stamps */ + return IRQ_WAKE_THREAD; +} + +static irqreturn_t ak8974_drdy_irq_thread(int irq, void *d) +{ + struct ak8974 *ak8974 = d; + unsigned int val; + int ret; + + /* Check if this was a DRDY from us */ + ret = regmap_read(ak8974->map, AK8974_STATUS, &val); + if (ret < 0) { + dev_err(&ak8974->i2c->dev, "error reading DRDY status\n"); + return IRQ_HANDLED; + } + if (val & AK8974_STATUS_DRDY) { + /* Yes this was our IRQ */ + complete(&ak8974->drdy_complete); + return IRQ_HANDLED; + } + + /* We may be on a shared IRQ, let the next client check */ + return IRQ_NONE; +} + +static int ak8974_selftest(struct ak8974 *ak8974) +{ + struct device *dev = &ak8974->i2c->dev; + unsigned int val; + int ret; + + ret = regmap_read(ak8974->map, AK8974_SELFTEST, &val); + if (ret) + return ret; + if (val != AK8974_SELFTEST_IDLE) { + dev_err(dev, "selftest not idle before test\n"); + return -EIO; + } + + /* Trigger self-test */ + ret = regmap_update_bits(ak8974->map, + AK8974_CTRL3, + AK8974_CTRL3_SELFTEST, + AK8974_CTRL3_SELFTEST); + if (ret) { + dev_err(dev, "could not write CTRL3\n"); + return ret; + } + + msleep(AK8974_SELFTEST_DELAY); + + ret = regmap_read(ak8974->map, AK8974_SELFTEST, &val); + if (ret) + return ret; + if (val != AK8974_SELFTEST_OK) { + dev_err(dev, "selftest result NOT OK (%02x)\n", val); + return -EIO; + } + + ret = regmap_read(ak8974->map, AK8974_SELFTEST, &val); + if (ret) + return ret; + if (val != AK8974_SELFTEST_IDLE) { + dev_err(dev, "selftest not idle after test (%02x)\n", val); + return -EIO; + } + dev_dbg(dev, "passed self-test\n"); + + return 0; +} + +static void ak8974_read_calib_data(struct ak8974 *ak8974, unsigned int reg, + __le16 *tab, size_t tab_size) +{ + int ret = regmap_bulk_read(ak8974->map, reg, tab, tab_size); + if (ret) { + memset(tab, 0xFF, tab_size); + dev_warn(&ak8974->i2c->dev, + "can't read calibration data (regs %u..%zu): %d\n", + reg, reg + tab_size - 1, ret); + } else { + add_device_randomness(tab, tab_size); + } +} + +static int ak8974_detect(struct ak8974 *ak8974) +{ + unsigned int whoami; + const char *name; + int ret; + unsigned int fw; + u16 sn; + + ret = regmap_read(ak8974->map, AK8974_WHOAMI, &whoami); + if (ret) + return ret; + + name = "ami305"; + + switch (whoami) { + case AK8974_WHOAMI_VALUE_AMI306: + name = "ami306"; + fallthrough; + case AK8974_WHOAMI_VALUE_AMI305: + ret = regmap_read(ak8974->map, AMI305_VER, &fw); + if (ret) + return ret; + fw &= 0x7f; /* only bits 0 thru 6 valid */ + ret = ak8974_get_u16_val(ak8974, AMI305_SN, &sn); + if (ret) + return ret; + add_device_randomness(&sn, sizeof(sn)); + dev_info(&ak8974->i2c->dev, + "detected %s, FW ver %02x, S/N: %04x\n", + name, fw, sn); + break; + case AK8974_WHOAMI_VALUE_AK8974: + name = "ak8974"; + dev_info(&ak8974->i2c->dev, "detected AK8974\n"); + break; + case AK8974_WHOAMI_VALUE_HSCDTD008A: + name = "hscdtd008a"; + dev_info(&ak8974->i2c->dev, "detected hscdtd008a\n"); + break; + default: + dev_err(&ak8974->i2c->dev, "unsupported device (%02x) ", + whoami); + return -ENODEV; + } + + ak8974->name = name; + ak8974->variant = whoami; + + if (whoami == AK8974_WHOAMI_VALUE_AMI306) { + __le16 fab_data1[9], fab_data2[3]; + int i; + + ak8974_read_calib_data(ak8974, AMI306_FINEOUTPUT_X, + fab_data1, sizeof(fab_data1)); + ak8974_read_calib_data(ak8974, AMI306_OFFZERO_X, + fab_data2, sizeof(fab_data2)); + + for (i = 0; i < 3; ++i) { + static const char axis[3] = "XYZ"; + static const char pgaxis[6] = "ZYZXYX"; + unsigned offz = le16_to_cpu(fab_data2[i]) & 0x7F; + unsigned fine = le16_to_cpu(fab_data1[i]); + unsigned sens = le16_to_cpu(fab_data1[i + 3]); + unsigned pgain1 = le16_to_cpu(fab_data1[i + 6]); + unsigned pgain2 = pgain1 >> 8; + + pgain1 &= 0xFF; + + dev_info(&ak8974->i2c->dev, + "factory calibration for axis %c: offz=%u sens=%u fine=%u pga%c=%u pga%c=%u\n", + axis[i], offz, sens, fine, pgaxis[i * 2], + pgain1, pgaxis[i * 2 + 1], pgain2); + } + } + + return 0; +} + +static int ak8974_measure_channel(struct ak8974 *ak8974, unsigned long address, + int *val) +{ + __le16 hw_values[3]; + int ret; + + pm_runtime_get_sync(&ak8974->i2c->dev); + mutex_lock(&ak8974->lock); + + /* + * We read all axes and discard all but one, for optimized + * reading, use the triggered buffer. + */ + ret = ak8974_trigmeas(ak8974); + if (ret) + goto out_unlock; + ret = ak8974_getresult(ak8974, hw_values); + if (ret) + goto out_unlock; + /* + * This explicit cast to (s16) is necessary as the measurement + * is done in 2's complement with positive and negative values. + * The follwing assignment to *val will then convert the signed + * s16 value to a signed int value. + */ + *val = (s16)le16_to_cpu(hw_values[address]); +out_unlock: + mutex_unlock(&ak8974->lock); + pm_runtime_mark_last_busy(&ak8974->i2c->dev); + pm_runtime_put_autosuspend(&ak8974->i2c->dev); + + return ret; +} + +static int ak8974_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct ak8974 *ak8974 = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (chan->address > 2) { + dev_err(&ak8974->i2c->dev, "faulty channel address\n"); + return -EIO; + } + ret = ak8974_measure_channel(ak8974, chan->address, val); + if (ret) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + switch (ak8974->variant) { + case AK8974_WHOAMI_VALUE_AMI306: + case AK8974_WHOAMI_VALUE_AMI305: + /* + * The datasheet for AMI305 and AMI306, page 6 + * specifies the range of the sensor to be + * +/- 12 Gauss. + */ + *val = 12; + /* + * 12 bits are used, +/- 2^11 + * [ -2048 .. 2047 ] (manual page 20) + * [ 0xf800 .. 0x07ff ] + */ + *val2 = 11; + return IIO_VAL_FRACTIONAL_LOG2; + case AK8974_WHOAMI_VALUE_HSCDTD008A: + /* + * The datasheet for HSCDTF008A, page 3 specifies the + * range of the sensor as +/- 2.4 mT per axis, which + * corresponds to +/- 2400 uT = +/- 24 Gauss. + */ + *val = 24; + /* + * 15 bits are used (set up in CTRL4), +/- 2^14 + * [ -16384 .. 16383 ] (manual page 24) + * [ 0xc000 .. 0x3fff ] + */ + *val2 = 14; + return IIO_VAL_FRACTIONAL_LOG2; + default: + /* GUESSING +/- 12 Gauss */ + *val = 12; + /* GUESSING 12 bits ADC +/- 2^11 */ + *val2 = 11; + return IIO_VAL_FRACTIONAL_LOG2; + } + break; + default: + /* Unknown request */ + break; + } + + return -EINVAL; +} + +static void ak8974_fill_buffer(struct iio_dev *indio_dev) +{ + struct ak8974 *ak8974 = iio_priv(indio_dev); + int ret; + + pm_runtime_get_sync(&ak8974->i2c->dev); + mutex_lock(&ak8974->lock); + + ret = ak8974_trigmeas(ak8974); + if (ret) { + dev_err(&ak8974->i2c->dev, "error triggering measure\n"); + goto out_unlock; + } + ret = ak8974_getresult(ak8974, ak8974->scan.channels); + if (ret) { + dev_err(&ak8974->i2c->dev, "error getting measures\n"); + goto out_unlock; + } + + iio_push_to_buffers_with_timestamp(indio_dev, &ak8974->scan, + iio_get_time_ns(indio_dev)); + + out_unlock: + mutex_unlock(&ak8974->lock); + pm_runtime_mark_last_busy(&ak8974->i2c->dev); + pm_runtime_put_autosuspend(&ak8974->i2c->dev); +} + +static irqreturn_t ak8974_handle_trigger(int irq, void *p) +{ + const struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + + ak8974_fill_buffer(indio_dev); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_mount_matrix * +ak8974_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct ak8974 *ak8974 = iio_priv(indio_dev); + + return &ak8974->orientation; +} + +static const struct iio_chan_spec_ext_info ak8974_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, ak8974_get_mount_matrix), + { }, +}; + +#define AK8974_AXIS_CHANNEL(axis, index, bits) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = ak8974_ext_info, \ + .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = bits, \ + .storagebits = 16, \ + .endianness = IIO_LE \ + }, \ + } + +/* + * We have no datasheet for the AK8974 but we guess that its + * ADC is 12 bits. The AMI305 and AMI306 certainly has 12bit + * ADC. + */ +static const struct iio_chan_spec ak8974_12_bits_channels[] = { + AK8974_AXIS_CHANNEL(X, 0, 12), + AK8974_AXIS_CHANNEL(Y, 1, 12), + AK8974_AXIS_CHANNEL(Z, 2, 12), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +/* + * The HSCDTD008A has 15 bits resolution the way we set it up + * in CTRL4. + */ +static const struct iio_chan_spec ak8974_15_bits_channels[] = { + AK8974_AXIS_CHANNEL(X, 0, 15), + AK8974_AXIS_CHANNEL(Y, 1, 15), + AK8974_AXIS_CHANNEL(Z, 2, 15), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const unsigned long ak8974_scan_masks[] = { 0x7, 0 }; + +static const struct iio_info ak8974_info = { + .read_raw = &ak8974_read_raw, +}; + +static bool ak8974_writeable_reg(struct device *dev, unsigned int reg) +{ + struct i2c_client *i2c = to_i2c_client(dev); + struct iio_dev *indio_dev = i2c_get_clientdata(i2c); + struct ak8974 *ak8974 = iio_priv(indio_dev); + + switch (reg) { + case AK8974_CTRL1: + case AK8974_CTRL2: + case AK8974_CTRL3: + case AK8974_INT_CTRL: + case AK8974_INT_THRES: + case AK8974_INT_THRES + 1: + return true; + case AK8974_PRESET: + case AK8974_PRESET + 1: + return ak8974->variant != AK8974_WHOAMI_VALUE_HSCDTD008A; + case AK8974_OFFSET_X: + case AK8974_OFFSET_X + 1: + case AK8974_OFFSET_Y: + case AK8974_OFFSET_Y + 1: + case AK8974_OFFSET_Z: + case AK8974_OFFSET_Z + 1: + return ak8974->variant == AK8974_WHOAMI_VALUE_AK8974 || + ak8974->variant == AK8974_WHOAMI_VALUE_HSCDTD008A; + case AMI305_OFFSET_X: + case AMI305_OFFSET_X + 1: + case AMI305_OFFSET_Y: + case AMI305_OFFSET_Y + 1: + case AMI305_OFFSET_Z: + case AMI305_OFFSET_Z + 1: + return ak8974->variant == AK8974_WHOAMI_VALUE_AMI305 || + ak8974->variant == AK8974_WHOAMI_VALUE_AMI306; + case AMI306_CTRL4: + case AMI306_CTRL4 + 1: + return ak8974->variant == AK8974_WHOAMI_VALUE_AMI306; + default: + return false; + } +} + +static bool ak8974_precious_reg(struct device *dev, unsigned int reg) +{ + return reg == AK8974_INT_CLEAR; +} + +static const struct regmap_config ak8974_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xff, + .writeable_reg = ak8974_writeable_reg, + .precious_reg = ak8974_precious_reg, +}; + +static int ak8974_probe(struct i2c_client *i2c) +{ + struct iio_dev *indio_dev; + struct ak8974 *ak8974; + unsigned long irq_trig; + int irq = i2c->irq; + int ret; + + /* Register with IIO */ + indio_dev = devm_iio_device_alloc(&i2c->dev, sizeof(*ak8974)); + if (indio_dev == NULL) + return -ENOMEM; + + ak8974 = iio_priv(indio_dev); + i2c_set_clientdata(i2c, indio_dev); + ak8974->i2c = i2c; + mutex_init(&ak8974->lock); + + ret = iio_read_mount_matrix(&i2c->dev, &ak8974->orientation); + if (ret) + return ret; + + ak8974->regs[0].supply = ak8974_reg_avdd; + ak8974->regs[1].supply = ak8974_reg_dvdd; + + ret = devm_regulator_bulk_get(&i2c->dev, + ARRAY_SIZE(ak8974->regs), + ak8974->regs); + if (ret < 0) + return dev_err_probe(&i2c->dev, ret, "cannot get regulators\n"); + + ret = regulator_bulk_enable(ARRAY_SIZE(ak8974->regs), ak8974->regs); + if (ret < 0) { + dev_err(&i2c->dev, "cannot enable regulators\n"); + return ret; + } + + /* Take runtime PM online */ + pm_runtime_get_noresume(&i2c->dev); + pm_runtime_set_active(&i2c->dev); + pm_runtime_enable(&i2c->dev); + + ak8974->map = devm_regmap_init_i2c(i2c, &ak8974_regmap_config); + if (IS_ERR(ak8974->map)) { + dev_err(&i2c->dev, "failed to allocate register map\n"); + pm_runtime_put_noidle(&i2c->dev); + pm_runtime_disable(&i2c->dev); + return PTR_ERR(ak8974->map); + } + + ret = ak8974_set_power(ak8974, AK8974_PWR_ON); + if (ret) { + dev_err(&i2c->dev, "could not power on\n"); + goto disable_pm; + } + + ret = ak8974_detect(ak8974); + if (ret) { + dev_err(&i2c->dev, "neither AK8974 nor AMI30x found\n"); + goto disable_pm; + } + + ret = ak8974_selftest(ak8974); + if (ret) + dev_err(&i2c->dev, "selftest failed (continuing anyway)\n"); + + ret = ak8974_reset(ak8974); + if (ret) { + dev_err(&i2c->dev, "AK8974 reset failed\n"); + goto disable_pm; + } + + switch (ak8974->variant) { + case AK8974_WHOAMI_VALUE_AMI306: + case AK8974_WHOAMI_VALUE_AMI305: + indio_dev->channels = ak8974_12_bits_channels; + indio_dev->num_channels = ARRAY_SIZE(ak8974_12_bits_channels); + break; + case AK8974_WHOAMI_VALUE_HSCDTD008A: + indio_dev->channels = ak8974_15_bits_channels; + indio_dev->num_channels = ARRAY_SIZE(ak8974_15_bits_channels); + break; + default: + indio_dev->channels = ak8974_12_bits_channels; + indio_dev->num_channels = ARRAY_SIZE(ak8974_12_bits_channels); + break; + } + indio_dev->info = &ak8974_info; + indio_dev->available_scan_masks = ak8974_scan_masks; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = ak8974->name; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + ak8974_handle_trigger, + NULL); + if (ret) { + dev_err(&i2c->dev, "triggered buffer setup failed\n"); + goto disable_pm; + } + + /* If we have a valid DRDY IRQ, make use of it */ + if (irq > 0) { + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + if (irq_trig == IRQF_TRIGGER_RISING) { + dev_info(&i2c->dev, "enable rising edge DRDY IRQ\n"); + } else if (irq_trig == IRQF_TRIGGER_FALLING) { + ak8974->drdy_active_low = true; + dev_info(&i2c->dev, "enable falling edge DRDY IRQ\n"); + } else { + irq_trig = IRQF_TRIGGER_RISING; + } + irq_trig |= IRQF_ONESHOT; + irq_trig |= IRQF_SHARED; + + ret = devm_request_threaded_irq(&i2c->dev, + irq, + ak8974_drdy_irq, + ak8974_drdy_irq_thread, + irq_trig, + ak8974->name, + ak8974); + if (ret) { + dev_err(&i2c->dev, "unable to request DRDY IRQ " + "- proceeding without IRQ\n"); + goto no_irq; + } + ak8974->drdy_irq = true; + } + +no_irq: + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&i2c->dev, "device register failed\n"); + goto cleanup_buffer; + } + + pm_runtime_set_autosuspend_delay(&i2c->dev, + AK8974_AUTOSUSPEND_DELAY); + pm_runtime_use_autosuspend(&i2c->dev); + pm_runtime_put(&i2c->dev); + + return 0; + +cleanup_buffer: + iio_triggered_buffer_cleanup(indio_dev); +disable_pm: + pm_runtime_put_noidle(&i2c->dev); + pm_runtime_disable(&i2c->dev); + ak8974_set_power(ak8974, AK8974_PWR_OFF); + regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs); + + return ret; +} + +static void ak8974_remove(struct i2c_client *i2c) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(i2c); + struct ak8974 *ak8974 = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + pm_runtime_get_sync(&i2c->dev); + pm_runtime_put_noidle(&i2c->dev); + pm_runtime_disable(&i2c->dev); + ak8974_set_power(ak8974, AK8974_PWR_OFF); + regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs); +} + +static int ak8974_runtime_suspend(struct device *dev) +{ + struct ak8974 *ak8974 = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + ak8974_set_power(ak8974, AK8974_PWR_OFF); + regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs); + + return 0; +} + +static int ak8974_runtime_resume(struct device *dev) +{ + struct ak8974 *ak8974 = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ak8974->regs), ak8974->regs); + if (ret) + return ret; + msleep(AK8974_POWERON_DELAY); + ret = ak8974_set_power(ak8974, AK8974_PWR_ON); + if (ret) + goto out_regulator_disable; + + ret = ak8974_configure(ak8974); + if (ret) + goto out_disable_power; + + return 0; + +out_disable_power: + ak8974_set_power(ak8974, AK8974_PWR_OFF); +out_regulator_disable: + regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs); + + return ret; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(ak8974_dev_pm_ops, ak8974_runtime_suspend, + ak8974_runtime_resume, NULL); + +static const struct i2c_device_id ak8974_id[] = { + {"ami305", 0 }, + {"ami306", 0 }, + {"ak8974", 0 }, + {"hscdtd008a", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ak8974_id); + +static const struct of_device_id ak8974_of_match[] = { + { .compatible = "asahi-kasei,ak8974", }, + { .compatible = "alps,hscdtd008a", }, + {} +}; +MODULE_DEVICE_TABLE(of, ak8974_of_match); + +static struct i2c_driver ak8974_driver = { + .driver = { + .name = "ak8974", + .pm = pm_ptr(&ak8974_dev_pm_ops), + .of_match_table = ak8974_of_match, + }, + .probe = ak8974_probe, + .remove = ak8974_remove, + .id_table = ak8974_id, +}; +module_i2c_driver(ak8974_driver); + +MODULE_DESCRIPTION("AK8974 and AMI30x 3-axis magnetometer driver"); +MODULE_AUTHOR("Samu Onkalo"); +MODULE_AUTHOR("Linus Walleij"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c new file mode 100644 index 0000000000..eb706d0bf7 --- /dev/null +++ b/drivers/iio/magnetometer/ak8975.c @@ -0,0 +1,1121 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * A sensor driver for the magnetometer AK8975. + * + * Magnetic compass sensor driver for monitoring magnetic flux information. + * + * Copyright (c) 2010, NVIDIA Corporation. + */ + +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +/* + * Register definitions, as well as various shifts and masks to get at the + * individual fields of the registers. + */ +#define AK8975_REG_WIA 0x00 +#define AK8975_DEVICE_ID 0x48 + +#define AK8975_REG_INFO 0x01 + +#define AK8975_REG_ST1 0x02 +#define AK8975_REG_ST1_DRDY_SHIFT 0 +#define AK8975_REG_ST1_DRDY_MASK (1 << AK8975_REG_ST1_DRDY_SHIFT) + +#define AK8975_REG_HXL 0x03 +#define AK8975_REG_HXH 0x04 +#define AK8975_REG_HYL 0x05 +#define AK8975_REG_HYH 0x06 +#define AK8975_REG_HZL 0x07 +#define AK8975_REG_HZH 0x08 +#define AK8975_REG_ST2 0x09 +#define AK8975_REG_ST2_DERR_SHIFT 2 +#define AK8975_REG_ST2_DERR_MASK (1 << AK8975_REG_ST2_DERR_SHIFT) + +#define AK8975_REG_ST2_HOFL_SHIFT 3 +#define AK8975_REG_ST2_HOFL_MASK (1 << AK8975_REG_ST2_HOFL_SHIFT) + +#define AK8975_REG_CNTL 0x0A +#define AK8975_REG_CNTL_MODE_SHIFT 0 +#define AK8975_REG_CNTL_MODE_MASK (0xF << AK8975_REG_CNTL_MODE_SHIFT) +#define AK8975_REG_CNTL_MODE_POWER_DOWN 0x00 +#define AK8975_REG_CNTL_MODE_ONCE 0x01 +#define AK8975_REG_CNTL_MODE_SELF_TEST 0x08 +#define AK8975_REG_CNTL_MODE_FUSE_ROM 0x0F + +#define AK8975_REG_RSVC 0x0B +#define AK8975_REG_ASTC 0x0C +#define AK8975_REG_TS1 0x0D +#define AK8975_REG_TS2 0x0E +#define AK8975_REG_I2CDIS 0x0F +#define AK8975_REG_ASAX 0x10 +#define AK8975_REG_ASAY 0x11 +#define AK8975_REG_ASAZ 0x12 + +#define AK8975_MAX_REGS AK8975_REG_ASAZ + +/* + * AK09912 Register definitions + */ +#define AK09912_REG_WIA1 0x00 +#define AK09912_REG_WIA2 0x01 +#define AK09916_DEVICE_ID 0x09 +#define AK09912_DEVICE_ID 0x04 +#define AK09911_DEVICE_ID 0x05 + +#define AK09911_REG_INFO1 0x02 +#define AK09911_REG_INFO2 0x03 + +#define AK09912_REG_ST1 0x10 + +#define AK09912_REG_ST1_DRDY_SHIFT 0 +#define AK09912_REG_ST1_DRDY_MASK (1 << AK09912_REG_ST1_DRDY_SHIFT) + +#define AK09912_REG_HXL 0x11 +#define AK09912_REG_HXH 0x12 +#define AK09912_REG_HYL 0x13 +#define AK09912_REG_HYH 0x14 +#define AK09912_REG_HZL 0x15 +#define AK09912_REG_HZH 0x16 +#define AK09912_REG_TMPS 0x17 + +#define AK09912_REG_ST2 0x18 +#define AK09912_REG_ST2_HOFL_SHIFT 3 +#define AK09912_REG_ST2_HOFL_MASK (1 << AK09912_REG_ST2_HOFL_SHIFT) + +#define AK09912_REG_CNTL1 0x30 + +#define AK09912_REG_CNTL2 0x31 +#define AK09912_REG_CNTL_MODE_POWER_DOWN 0x00 +#define AK09912_REG_CNTL_MODE_ONCE 0x01 +#define AK09912_REG_CNTL_MODE_SELF_TEST 0x10 +#define AK09912_REG_CNTL_MODE_FUSE_ROM 0x1F +#define AK09912_REG_CNTL2_MODE_SHIFT 0 +#define AK09912_REG_CNTL2_MODE_MASK (0x1F << AK09912_REG_CNTL2_MODE_SHIFT) + +#define AK09912_REG_CNTL3 0x32 + +#define AK09912_REG_TS1 0x33 +#define AK09912_REG_TS2 0x34 +#define AK09912_REG_TS3 0x35 +#define AK09912_REG_I2CDIS 0x36 +#define AK09912_REG_TS4 0x37 + +#define AK09912_REG_ASAX 0x60 +#define AK09912_REG_ASAY 0x61 +#define AK09912_REG_ASAZ 0x62 + +#define AK09912_MAX_REGS AK09912_REG_ASAZ + +/* + * Miscellaneous values. + */ +#define AK8975_MAX_CONVERSION_TIMEOUT 500 +#define AK8975_CONVERSION_DONE_POLL_TIME 10 +#define AK8975_DATA_READY_TIMEOUT ((100*HZ)/1000) + +/* + * Precalculate scale factor (in Gauss units) for each axis and + * store in the device data. + * + * This scale factor is axis-dependent, and is derived from 3 calibration + * factors ASA(x), ASA(y), and ASA(z). + * + * These ASA values are read from the sensor device at start of day, and + * cached in the device context struct. + * + * Adjusting the flux value with the sensitivity adjustment value should be + * done via the following formula: + * + * Hadj = H * ( ( ( (ASA-128)*0.5 ) / 128 ) + 1 ) + * where H is the raw value, ASA is the sensitivity adjustment, and Hadj + * is the resultant adjusted value. + * + * We reduce the formula to: + * + * Hadj = H * (ASA + 128) / 256 + * + * H is in the range of -4096 to 4095. The magnetometer has a range of + * +-1229uT. To go from the raw value to uT is: + * + * HuT = H * 1229/4096, or roughly, 3/10. + * + * Since 1uT = 0.01 gauss, our final scale factor becomes: + * + * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100 + * Hadj = H * ((ASA + 128) * 0.003) / 256 + * + * Since ASA doesn't change, we cache the resultant scale factor into the + * device context in ak8975_setup(). + * + * Given we use IIO_VAL_INT_PLUS_MICRO bit when displaying the scale, we + * multiply the stored scale value by 1e6. + */ +static long ak8975_raw_to_gauss(u16 data) +{ + return (((long)data + 128) * 3000) / 256; +} + +/* + * For AK8963 and AK09911, same calculation, but the device is less sensitive: + * + * H is in the range of +-8190. The magnetometer has a range of + * +-4912uT. To go from the raw value to uT is: + * + * HuT = H * 4912/8190, or roughly, 6/10, instead of 3/10. + */ + +static long ak8963_09911_raw_to_gauss(u16 data) +{ + return (((long)data + 128) * 6000) / 256; +} + +/* + * For AK09912, same calculation, except the device is more sensitive: + * + * H is in the range of -32752 to 32752. The magnetometer has a range of + * +-4912uT. To go from the raw value to uT is: + * + * HuT = H * 4912/32752, or roughly, 3/20, instead of 3/10. + */ +static long ak09912_raw_to_gauss(u16 data) +{ + return (((long)data + 128) * 1500) / 256; +} + +/* Compatible Asahi Kasei Compass parts */ +enum asahi_compass_chipset { + AKXXXX = 0, + AK8975, + AK8963, + AK09911, + AK09912, + AK09916, +}; + +enum ak_ctrl_reg_addr { + ST1, + ST2, + CNTL, + ASA_BASE, + MAX_REGS, + REGS_END, +}; + +enum ak_ctrl_reg_mask { + ST1_DRDY, + ST2_HOFL, + ST2_DERR, + CNTL_MODE, + MASK_END, +}; + +enum ak_ctrl_mode { + POWER_DOWN, + MODE_ONCE, + SELF_TEST, + FUSE_ROM, + MODE_END, +}; + +struct ak_def { + enum asahi_compass_chipset type; + long (*raw_to_gauss)(u16 data); + u16 range; + u8 ctrl_regs[REGS_END]; + u8 ctrl_masks[MASK_END]; + u8 ctrl_modes[MODE_END]; + u8 data_regs[3]; +}; + +static const struct ak_def ak_def_array[] = { + { + .type = AK8975, + .raw_to_gauss = ak8975_raw_to_gauss, + .range = 4096, + .ctrl_regs = { + AK8975_REG_ST1, + AK8975_REG_ST2, + AK8975_REG_CNTL, + AK8975_REG_ASAX, + AK8975_MAX_REGS}, + .ctrl_masks = { + AK8975_REG_ST1_DRDY_MASK, + AK8975_REG_ST2_HOFL_MASK, + AK8975_REG_ST2_DERR_MASK, + AK8975_REG_CNTL_MODE_MASK}, + .ctrl_modes = { + AK8975_REG_CNTL_MODE_POWER_DOWN, + AK8975_REG_CNTL_MODE_ONCE, + AK8975_REG_CNTL_MODE_SELF_TEST, + AK8975_REG_CNTL_MODE_FUSE_ROM}, + .data_regs = { + AK8975_REG_HXL, + AK8975_REG_HYL, + AK8975_REG_HZL}, + }, + { + .type = AK8963, + .raw_to_gauss = ak8963_09911_raw_to_gauss, + .range = 8190, + .ctrl_regs = { + AK8975_REG_ST1, + AK8975_REG_ST2, + AK8975_REG_CNTL, + AK8975_REG_ASAX, + AK8975_MAX_REGS}, + .ctrl_masks = { + AK8975_REG_ST1_DRDY_MASK, + AK8975_REG_ST2_HOFL_MASK, + 0, + AK8975_REG_CNTL_MODE_MASK}, + .ctrl_modes = { + AK8975_REG_CNTL_MODE_POWER_DOWN, + AK8975_REG_CNTL_MODE_ONCE, + AK8975_REG_CNTL_MODE_SELF_TEST, + AK8975_REG_CNTL_MODE_FUSE_ROM}, + .data_regs = { + AK8975_REG_HXL, + AK8975_REG_HYL, + AK8975_REG_HZL}, + }, + { + .type = AK09911, + .raw_to_gauss = ak8963_09911_raw_to_gauss, + .range = 8192, + .ctrl_regs = { + AK09912_REG_ST1, + AK09912_REG_ST2, + AK09912_REG_CNTL2, + AK09912_REG_ASAX, + AK09912_MAX_REGS}, + .ctrl_masks = { + AK09912_REG_ST1_DRDY_MASK, + AK09912_REG_ST2_HOFL_MASK, + 0, + AK09912_REG_CNTL2_MODE_MASK}, + .ctrl_modes = { + AK09912_REG_CNTL_MODE_POWER_DOWN, + AK09912_REG_CNTL_MODE_ONCE, + AK09912_REG_CNTL_MODE_SELF_TEST, + AK09912_REG_CNTL_MODE_FUSE_ROM}, + .data_regs = { + AK09912_REG_HXL, + AK09912_REG_HYL, + AK09912_REG_HZL}, + }, + { + .type = AK09912, + .raw_to_gauss = ak09912_raw_to_gauss, + .range = 32752, + .ctrl_regs = { + AK09912_REG_ST1, + AK09912_REG_ST2, + AK09912_REG_CNTL2, + AK09912_REG_ASAX, + AK09912_MAX_REGS}, + .ctrl_masks = { + AK09912_REG_ST1_DRDY_MASK, + AK09912_REG_ST2_HOFL_MASK, + 0, + AK09912_REG_CNTL2_MODE_MASK}, + .ctrl_modes = { + AK09912_REG_CNTL_MODE_POWER_DOWN, + AK09912_REG_CNTL_MODE_ONCE, + AK09912_REG_CNTL_MODE_SELF_TEST, + AK09912_REG_CNTL_MODE_FUSE_ROM}, + .data_regs = { + AK09912_REG_HXL, + AK09912_REG_HYL, + AK09912_REG_HZL}, + }, + { + .type = AK09916, + .raw_to_gauss = ak09912_raw_to_gauss, + .range = 32752, + .ctrl_regs = { + AK09912_REG_ST1, + AK09912_REG_ST2, + AK09912_REG_CNTL2, + AK09912_REG_ASAX, + AK09912_MAX_REGS}, + .ctrl_masks = { + AK09912_REG_ST1_DRDY_MASK, + AK09912_REG_ST2_HOFL_MASK, + 0, + AK09912_REG_CNTL2_MODE_MASK}, + .ctrl_modes = { + AK09912_REG_CNTL_MODE_POWER_DOWN, + AK09912_REG_CNTL_MODE_ONCE, + AK09912_REG_CNTL_MODE_SELF_TEST, + AK09912_REG_CNTL_MODE_FUSE_ROM}, + .data_regs = { + AK09912_REG_HXL, + AK09912_REG_HYL, + AK09912_REG_HZL}, + } +}; + +/* + * Per-instance context data for the device. + */ +struct ak8975_data { + struct i2c_client *client; + const struct ak_def *def; + struct mutex lock; + u8 asa[3]; + long raw_to_gauss[3]; + struct gpio_desc *eoc_gpiod; + struct gpio_desc *reset_gpiod; + int eoc_irq; + wait_queue_head_t data_ready_queue; + unsigned long flags; + u8 cntl_cache; + struct iio_mount_matrix orientation; + struct regulator *vdd; + struct regulator *vid; + + /* Ensure natural alignment of timestamp */ + struct { + s16 channels[3]; + s64 ts __aligned(8); + } scan; +}; + +/* Enable attached power regulator if any. */ +static int ak8975_power_on(const struct ak8975_data *data) +{ + int ret; + + ret = regulator_enable(data->vdd); + if (ret) { + dev_warn(&data->client->dev, + "Failed to enable specified Vdd supply\n"); + return ret; + } + ret = regulator_enable(data->vid); + if (ret) { + dev_warn(&data->client->dev, + "Failed to enable specified Vid supply\n"); + regulator_disable(data->vdd); + return ret; + } + + gpiod_set_value_cansleep(data->reset_gpiod, 0); + + /* + * According to the datasheet the power supply rise time is 200us + * and the minimum wait time before mode setting is 100us, in + * total 300us. Add some margin and say minimum 500us here. + */ + usleep_range(500, 1000); + return 0; +} + +/* Disable attached power regulator if any. */ +static void ak8975_power_off(const struct ak8975_data *data) +{ + gpiod_set_value_cansleep(data->reset_gpiod, 1); + + regulator_disable(data->vid); + regulator_disable(data->vdd); +} + +/* + * Return 0 if the i2c device is the one we expect. + * return a negative error number otherwise + */ +static int ak8975_who_i_am(struct i2c_client *client, + enum asahi_compass_chipset type) +{ + u8 wia_val[2]; + int ret; + + /* + * Signature for each device: + * Device | WIA1 | WIA2 + * AK09916 | DEVICE_ID_| AK09916_DEVICE_ID + * AK09912 | DEVICE_ID | AK09912_DEVICE_ID + * AK09911 | DEVICE_ID | AK09911_DEVICE_ID + * AK8975 | DEVICE_ID | NA + * AK8963 | DEVICE_ID | NA + */ + ret = i2c_smbus_read_i2c_block_data_or_emulated( + client, AK09912_REG_WIA1, 2, wia_val); + if (ret < 0) { + dev_err(&client->dev, "Error reading WIA\n"); + return ret; + } + + if (wia_val[0] != AK8975_DEVICE_ID) + return -ENODEV; + + switch (type) { + case AK8975: + case AK8963: + return 0; + case AK09911: + if (wia_val[1] == AK09911_DEVICE_ID) + return 0; + break; + case AK09912: + if (wia_val[1] == AK09912_DEVICE_ID) + return 0; + break; + case AK09916: + if (wia_val[1] == AK09916_DEVICE_ID) + return 0; + break; + default: + dev_err(&client->dev, "Type %d unknown\n", type); + } + return -ENODEV; +} + +/* + * Helper function to write to CNTL register. + */ +static int ak8975_set_mode(struct ak8975_data *data, enum ak_ctrl_mode mode) +{ + u8 regval; + int ret; + + regval = (data->cntl_cache & ~data->def->ctrl_masks[CNTL_MODE]) | + data->def->ctrl_modes[mode]; + ret = i2c_smbus_write_byte_data(data->client, + data->def->ctrl_regs[CNTL], regval); + if (ret < 0) { + return ret; + } + data->cntl_cache = regval; + /* After mode change wait atleast 100us */ + usleep_range(100, 500); + + return 0; +} + +/* + * Handle data ready irq + */ +static irqreturn_t ak8975_irq_handler(int irq, void *data) +{ + struct ak8975_data *ak8975 = data; + + set_bit(0, &ak8975->flags); + wake_up(&ak8975->data_ready_queue); + + return IRQ_HANDLED; +} + +/* + * Install data ready interrupt handler + */ +static int ak8975_setup_irq(struct ak8975_data *data) +{ + struct i2c_client *client = data->client; + int rc; + int irq; + + init_waitqueue_head(&data->data_ready_queue); + clear_bit(0, &data->flags); + if (client->irq) + irq = client->irq; + else + irq = gpiod_to_irq(data->eoc_gpiod); + + rc = devm_request_irq(&client->dev, irq, ak8975_irq_handler, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + dev_name(&client->dev), data); + if (rc < 0) { + dev_err(&client->dev, "irq %d request failed: %d\n", irq, rc); + return rc; + } + + data->eoc_irq = irq; + + return rc; +} + + +/* + * Perform some start-of-day setup, including reading the asa calibration + * values and caching them. + */ +static int ak8975_setup(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ak8975_data *data = iio_priv(indio_dev); + int ret; + + /* Write the fused rom access mode. */ + ret = ak8975_set_mode(data, FUSE_ROM); + if (ret < 0) { + dev_err(&client->dev, "Error in setting fuse access mode\n"); + return ret; + } + + /* Get asa data and store in the device data. */ + ret = i2c_smbus_read_i2c_block_data_or_emulated( + client, data->def->ctrl_regs[ASA_BASE], + 3, data->asa); + if (ret < 0) { + dev_err(&client->dev, "Not able to read asa data\n"); + return ret; + } + + /* After reading fuse ROM data set power-down mode */ + ret = ak8975_set_mode(data, POWER_DOWN); + if (ret < 0) { + dev_err(&client->dev, "Error in setting power-down mode\n"); + return ret; + } + + if (data->eoc_gpiod || client->irq > 0) { + ret = ak8975_setup_irq(data); + if (ret < 0) { + dev_err(&client->dev, + "Error setting data ready interrupt\n"); + return ret; + } + } + + data->raw_to_gauss[0] = data->def->raw_to_gauss(data->asa[0]); + data->raw_to_gauss[1] = data->def->raw_to_gauss(data->asa[1]); + data->raw_to_gauss[2] = data->def->raw_to_gauss(data->asa[2]); + + return 0; +} + +static int wait_conversion_complete_gpio(struct ak8975_data *data) +{ + struct i2c_client *client = data->client; + u32 timeout_ms = AK8975_MAX_CONVERSION_TIMEOUT; + int ret; + + /* Wait for the conversion to complete. */ + while (timeout_ms) { + msleep(AK8975_CONVERSION_DONE_POLL_TIME); + if (gpiod_get_value(data->eoc_gpiod)) + break; + timeout_ms -= AK8975_CONVERSION_DONE_POLL_TIME; + } + if (!timeout_ms) { + dev_err(&client->dev, "Conversion timeout happened\n"); + return -EINVAL; + } + + ret = i2c_smbus_read_byte_data(client, data->def->ctrl_regs[ST1]); + if (ret < 0) + dev_err(&client->dev, "Error in reading ST1\n"); + + return ret; +} + +static int wait_conversion_complete_polled(struct ak8975_data *data) +{ + struct i2c_client *client = data->client; + u8 read_status; + u32 timeout_ms = AK8975_MAX_CONVERSION_TIMEOUT; + int ret; + + /* Wait for the conversion to complete. */ + while (timeout_ms) { + msleep(AK8975_CONVERSION_DONE_POLL_TIME); + ret = i2c_smbus_read_byte_data(client, + data->def->ctrl_regs[ST1]); + if (ret < 0) { + dev_err(&client->dev, "Error in reading ST1\n"); + return ret; + } + read_status = ret; + if (read_status) + break; + timeout_ms -= AK8975_CONVERSION_DONE_POLL_TIME; + } + if (!timeout_ms) { + dev_err(&client->dev, "Conversion timeout happened\n"); + return -EINVAL; + } + + return read_status; +} + +/* Returns 0 if the end of conversion interrupt occured or -ETIME otherwise */ +static int wait_conversion_complete_interrupt(struct ak8975_data *data) +{ + int ret; + + ret = wait_event_timeout(data->data_ready_queue, + test_bit(0, &data->flags), + AK8975_DATA_READY_TIMEOUT); + clear_bit(0, &data->flags); + + return ret > 0 ? 0 : -ETIME; +} + +static int ak8975_start_read_axis(struct ak8975_data *data, + const struct i2c_client *client) +{ + /* Set up the device for taking a sample. */ + int ret = ak8975_set_mode(data, MODE_ONCE); + + if (ret < 0) { + dev_err(&client->dev, "Error in setting operating mode\n"); + return ret; + } + + /* Wait for the conversion to complete. */ + if (data->eoc_irq) + ret = wait_conversion_complete_interrupt(data); + else if (data->eoc_gpiod) + ret = wait_conversion_complete_gpio(data); + else + ret = wait_conversion_complete_polled(data); + if (ret < 0) + return ret; + + /* This will be executed only for non-interrupt based waiting case */ + if (ret & data->def->ctrl_masks[ST1_DRDY]) { + ret = i2c_smbus_read_byte_data(client, + data->def->ctrl_regs[ST2]); + if (ret < 0) { + dev_err(&client->dev, "Error in reading ST2\n"); + return ret; + } + if (ret & (data->def->ctrl_masks[ST2_DERR] | + data->def->ctrl_masks[ST2_HOFL])) { + dev_err(&client->dev, "ST2 status error 0x%x\n", ret); + return -EINVAL; + } + } + + return 0; +} + +/* Retrieve raw flux value for one of the x, y, or z axis. */ +static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) +{ + struct ak8975_data *data = iio_priv(indio_dev); + const struct i2c_client *client = data->client; + const struct ak_def *def = data->def; + __le16 rval; + u16 buff; + int ret; + + pm_runtime_get_sync(&data->client->dev); + + mutex_lock(&data->lock); + + ret = ak8975_start_read_axis(data, client); + if (ret) + goto exit; + + ret = i2c_smbus_read_i2c_block_data_or_emulated( + client, def->data_regs[index], + sizeof(rval), (u8*)&rval); + if (ret < 0) + goto exit; + + mutex_unlock(&data->lock); + + pm_runtime_mark_last_busy(&data->client->dev); + pm_runtime_put_autosuspend(&data->client->dev); + + /* Swap bytes and convert to valid range. */ + buff = le16_to_cpu(rval); + *val = clamp_t(s16, buff, -def->range, def->range); + return IIO_VAL_INT; + +exit: + mutex_unlock(&data->lock); + dev_err(&client->dev, "Error in reading axis\n"); + return ret; +} + +static int ak8975_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct ak8975_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return ak8975_read_axis(indio_dev, chan->address, val); + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = data->raw_to_gauss[chan->address]; + return IIO_VAL_INT_PLUS_MICRO; + } + return -EINVAL; +} + +static const struct iio_mount_matrix * +ak8975_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct ak8975_data *data = iio_priv(indio_dev); + + return &data->orientation; +} + +static const struct iio_chan_spec_ext_info ak8975_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, ak8975_get_mount_matrix), + { } +}; + +#define AK8975_CHANNEL(axis, index) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU \ + }, \ + .ext_info = ak8975_ext_info, \ + } + +static const struct iio_chan_spec ak8975_channels[] = { + AK8975_CHANNEL(X, 0), AK8975_CHANNEL(Y, 1), AK8975_CHANNEL(Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const unsigned long ak8975_scan_masks[] = { 0x7, 0 }; + +static const struct iio_info ak8975_info = { + .read_raw = &ak8975_read_raw, +}; + +static const struct acpi_device_id ak_acpi_match[] = { + {"AK8975", AK8975}, + {"AK8963", AK8963}, + {"INVN6500", AK8963}, + {"AK009911", AK09911}, + {"AK09911", AK09911}, + {"AKM9911", AK09911}, + {"AK09912", AK09912}, + { } +}; +MODULE_DEVICE_TABLE(acpi, ak_acpi_match); + +static void ak8975_fill_buffer(struct iio_dev *indio_dev) +{ + struct ak8975_data *data = iio_priv(indio_dev); + const struct i2c_client *client = data->client; + const struct ak_def *def = data->def; + int ret; + __le16 fval[3]; + + mutex_lock(&data->lock); + + ret = ak8975_start_read_axis(data, client); + if (ret) + goto unlock; + + /* + * For each axis, read the flux value from the appropriate register + * (the register is specified in the iio device attributes). + */ + ret = i2c_smbus_read_i2c_block_data_or_emulated(client, + def->data_regs[0], + 3 * sizeof(fval[0]), + (u8 *)fval); + if (ret < 0) + goto unlock; + + mutex_unlock(&data->lock); + + /* Clamp to valid range. */ + data->scan.channels[0] = clamp_t(s16, le16_to_cpu(fval[0]), -def->range, def->range); + data->scan.channels[1] = clamp_t(s16, le16_to_cpu(fval[1]), -def->range, def->range); + data->scan.channels[2] = clamp_t(s16, le16_to_cpu(fval[2]), -def->range, def->range); + + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + iio_get_time_ns(indio_dev)); + + return; + +unlock: + mutex_unlock(&data->lock); + dev_err(&client->dev, "Error in reading axes block\n"); +} + +static irqreturn_t ak8975_handle_trigger(int irq, void *p) +{ + const struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + + ak8975_fill_buffer(indio_dev); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int ak8975_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + struct ak8975_data *data; + struct iio_dev *indio_dev; + struct gpio_desc *eoc_gpiod; + struct gpio_desc *reset_gpiod; + const void *match; + unsigned int i; + int err; + enum asahi_compass_chipset chipset; + const char *name = NULL; + + /* + * Grab and set up the supplied GPIO. + * We may not have a GPIO based IRQ to scan, that is fine, we will + * poll if so. + */ + eoc_gpiod = devm_gpiod_get_optional(&client->dev, NULL, GPIOD_IN); + if (IS_ERR(eoc_gpiod)) + return PTR_ERR(eoc_gpiod); + if (eoc_gpiod) + gpiod_set_consumer_name(eoc_gpiod, "ak_8975"); + + /* + * According to AK09911 datasheet, if reset GPIO is provided then + * deassert reset on ak8975_power_on() and assert reset on + * ak8975_power_off(). + */ + reset_gpiod = devm_gpiod_get_optional(&client->dev, + "reset", GPIOD_OUT_HIGH); + if (IS_ERR(reset_gpiod)) + return PTR_ERR(reset_gpiod); + + /* Register with IIO */ + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (indio_dev == NULL) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + + data->client = client; + data->eoc_gpiod = eoc_gpiod; + data->reset_gpiod = reset_gpiod; + data->eoc_irq = 0; + + err = iio_read_mount_matrix(&client->dev, &data->orientation); + if (err) + return err; + + /* id will be NULL when enumerated via ACPI */ + match = device_get_match_data(&client->dev); + if (match) { + chipset = (uintptr_t)match; + name = dev_name(&client->dev); + } else if (id) { + chipset = (enum asahi_compass_chipset)(id->driver_data); + name = id->name; + } else + return -ENOSYS; + + for (i = 0; i < ARRAY_SIZE(ak_def_array); i++) + if (ak_def_array[i].type == chipset) + break; + + if (i == ARRAY_SIZE(ak_def_array)) { + dev_err(&client->dev, "AKM device type unsupported: %d\n", + chipset); + return -ENODEV; + } + + data->def = &ak_def_array[i]; + + /* Fetch the regulators */ + data->vdd = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(data->vdd)) + return PTR_ERR(data->vdd); + data->vid = devm_regulator_get(&client->dev, "vid"); + if (IS_ERR(data->vid)) + return PTR_ERR(data->vid); + + err = ak8975_power_on(data); + if (err) + return err; + + err = ak8975_who_i_am(client, data->def->type); + if (err < 0) { + dev_err(&client->dev, "Unexpected device\n"); + goto power_off; + } + dev_dbg(&client->dev, "Asahi compass chip %s\n", name); + + /* Perform some basic start-of-day setup of the device. */ + err = ak8975_setup(client); + if (err < 0) { + dev_err(&client->dev, "%s initialization fails\n", name); + goto power_off; + } + + mutex_init(&data->lock); + indio_dev->channels = ak8975_channels; + indio_dev->num_channels = ARRAY_SIZE(ak8975_channels); + indio_dev->info = &ak8975_info; + indio_dev->available_scan_masks = ak8975_scan_masks; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = name; + + err = iio_triggered_buffer_setup(indio_dev, NULL, ak8975_handle_trigger, + NULL); + if (err) { + dev_err(&client->dev, "triggered buffer setup failed\n"); + goto power_off; + } + + err = iio_device_register(indio_dev); + if (err) { + dev_err(&client->dev, "device register failed\n"); + goto cleanup_buffer; + } + + /* Enable runtime PM */ + pm_runtime_get_noresume(&client->dev); + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + /* + * The device comes online in 500us, so add two orders of magnitude + * of delay before autosuspending: 50 ms. + */ + pm_runtime_set_autosuspend_delay(&client->dev, 50); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_put(&client->dev); + + return 0; + +cleanup_buffer: + iio_triggered_buffer_cleanup(indio_dev); +power_off: + ak8975_power_off(data); + return err; +} + +static void ak8975_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ak8975_data *data = iio_priv(indio_dev); + + pm_runtime_get_sync(&client->dev); + pm_runtime_put_noidle(&client->dev); + pm_runtime_disable(&client->dev); + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + ak8975_set_mode(data, POWER_DOWN); + ak8975_power_off(data); +} + +static int ak8975_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ak8975_data *data = iio_priv(indio_dev); + int ret; + + /* Set the device in power down if it wasn't already */ + ret = ak8975_set_mode(data, POWER_DOWN); + if (ret < 0) { + dev_err(&client->dev, "Error in setting power-down mode\n"); + return ret; + } + /* Next cut the regulators */ + ak8975_power_off(data); + + return 0; +} + +static int ak8975_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ak8975_data *data = iio_priv(indio_dev); + int ret; + + /* Take up the regulators */ + ak8975_power_on(data); + /* + * We come up in powered down mode, the reading routines will + * put us in the mode to read values later. + */ + ret = ak8975_set_mode(data, POWER_DOWN); + if (ret < 0) { + dev_err(&client->dev, "Error in setting power-down mode\n"); + return ret; + } + + return 0; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(ak8975_dev_pm_ops, ak8975_runtime_suspend, + ak8975_runtime_resume, NULL); + +static const struct i2c_device_id ak8975_id[] = { + {"ak8975", AK8975}, + {"ak8963", AK8963}, + {"AK8963", AK8963}, + {"ak09911", AK09911}, + {"ak09912", AK09912}, + {"ak09916", AK09916}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, ak8975_id); + +static const struct of_device_id ak8975_of_match[] = { + { .compatible = "asahi-kasei,ak8975", }, + { .compatible = "ak8975", }, + { .compatible = "asahi-kasei,ak8963", }, + { .compatible = "ak8963", }, + { .compatible = "asahi-kasei,ak09911", }, + { .compatible = "ak09911", }, + { .compatible = "asahi-kasei,ak09912", }, + { .compatible = "ak09912", }, + { .compatible = "asahi-kasei,ak09916", }, + { .compatible = "ak09916", }, + {} +}; +MODULE_DEVICE_TABLE(of, ak8975_of_match); + +static struct i2c_driver ak8975_driver = { + .driver = { + .name = "ak8975", + .pm = pm_ptr(&ak8975_dev_pm_ops), + .of_match_table = ak8975_of_match, + .acpi_match_table = ak_acpi_match, + }, + .probe = ak8975_probe, + .remove = ak8975_remove, + .id_table = ak8975_id, +}; +module_i2c_driver(ak8975_driver); + +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_DESCRIPTION("AK8975 magnetometer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/bmc150_magn.c b/drivers/iio/magnetometer/bmc150_magn.c new file mode 100644 index 0000000000..06d5a1ef1f --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn.c @@ -0,0 +1,1084 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Bosch BMC150 three-axis magnetic field sensor driver + * + * Copyright (c) 2015, Intel Corporation. + * + * This code is based on bmm050_api.c authored by contact@bosch.sensortec.com: + * + * (C) Copyright 2011~2014 Bosch Sensortec GmbH All Rights Reserved + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/events.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#include "bmc150_magn.h" + +#define BMC150_MAGN_DRV_NAME "bmc150_magn" +#define BMC150_MAGN_IRQ_NAME "bmc150_magn_event" + +#define BMC150_MAGN_REG_CHIP_ID 0x40 +#define BMC150_MAGN_CHIP_ID_VAL 0x32 + +#define BMC150_MAGN_REG_X_L 0x42 +#define BMC150_MAGN_REG_X_M 0x43 +#define BMC150_MAGN_REG_Y_L 0x44 +#define BMC150_MAGN_REG_Y_M 0x45 +#define BMC150_MAGN_SHIFT_XY_L 3 +#define BMC150_MAGN_REG_Z_L 0x46 +#define BMC150_MAGN_REG_Z_M 0x47 +#define BMC150_MAGN_SHIFT_Z_L 1 +#define BMC150_MAGN_REG_RHALL_L 0x48 +#define BMC150_MAGN_REG_RHALL_M 0x49 +#define BMC150_MAGN_SHIFT_RHALL_L 2 + +#define BMC150_MAGN_REG_INT_STATUS 0x4A + +#define BMC150_MAGN_REG_POWER 0x4B +#define BMC150_MAGN_MASK_POWER_CTL BIT(0) + +#define BMC150_MAGN_REG_OPMODE_ODR 0x4C +#define BMC150_MAGN_MASK_OPMODE GENMASK(2, 1) +#define BMC150_MAGN_SHIFT_OPMODE 1 +#define BMC150_MAGN_MODE_NORMAL 0x00 +#define BMC150_MAGN_MODE_FORCED 0x01 +#define BMC150_MAGN_MODE_SLEEP 0x03 +#define BMC150_MAGN_MASK_ODR GENMASK(5, 3) +#define BMC150_MAGN_SHIFT_ODR 3 + +#define BMC150_MAGN_REG_INT 0x4D + +#define BMC150_MAGN_REG_INT_DRDY 0x4E +#define BMC150_MAGN_MASK_DRDY_EN BIT(7) +#define BMC150_MAGN_SHIFT_DRDY_EN 7 +#define BMC150_MAGN_MASK_DRDY_INT3 BIT(6) +#define BMC150_MAGN_MASK_DRDY_Z_EN BIT(5) +#define BMC150_MAGN_MASK_DRDY_Y_EN BIT(4) +#define BMC150_MAGN_MASK_DRDY_X_EN BIT(3) +#define BMC150_MAGN_MASK_DRDY_DR_POLARITY BIT(2) +#define BMC150_MAGN_MASK_DRDY_LATCHING BIT(1) +#define BMC150_MAGN_MASK_DRDY_INT3_POLARITY BIT(0) + +#define BMC150_MAGN_REG_LOW_THRESH 0x4F +#define BMC150_MAGN_REG_HIGH_THRESH 0x50 +#define BMC150_MAGN_REG_REP_XY 0x51 +#define BMC150_MAGN_REG_REP_Z 0x52 +#define BMC150_MAGN_REG_REP_DATAMASK GENMASK(7, 0) + +#define BMC150_MAGN_REG_TRIM_START 0x5D +#define BMC150_MAGN_REG_TRIM_END 0x71 + +#define BMC150_MAGN_XY_OVERFLOW_VAL -4096 +#define BMC150_MAGN_Z_OVERFLOW_VAL -16384 + +/* Time from SUSPEND to SLEEP */ +#define BMC150_MAGN_START_UP_TIME_MS 3 + +#define BMC150_MAGN_AUTO_SUSPEND_DELAY_MS 2000 + +#define BMC150_MAGN_REGVAL_TO_REPXY(regval) (((regval) * 2) + 1) +#define BMC150_MAGN_REGVAL_TO_REPZ(regval) ((regval) + 1) +#define BMC150_MAGN_REPXY_TO_REGVAL(rep) (((rep) - 1) / 2) +#define BMC150_MAGN_REPZ_TO_REGVAL(rep) ((rep) - 1) + +enum bmc150_magn_axis { + AXIS_X, + AXIS_Y, + AXIS_Z, + RHALL, + AXIS_XYZ_MAX = RHALL, + AXIS_XYZR_MAX, +}; + +enum bmc150_magn_power_modes { + BMC150_MAGN_POWER_MODE_SUSPEND, + BMC150_MAGN_POWER_MODE_SLEEP, + BMC150_MAGN_POWER_MODE_NORMAL, +}; + +struct bmc150_magn_trim_regs { + s8 x1; + s8 y1; + __le16 reserved1; + u8 reserved2; + __le16 z4; + s8 x2; + s8 y2; + __le16 reserved3; + __le16 z2; + __le16 z1; + __le16 xyz1; + __le16 z3; + s8 xy2; + u8 xy1; +} __packed; + +struct bmc150_magn_data { + struct device *dev; + /* + * 1. Protect this structure. + * 2. Serialize sequences that power on/off the device and access HW. + */ + struct mutex mutex; + struct regmap *regmap; + struct regulator_bulk_data regulators[2]; + struct iio_mount_matrix orientation; + /* Ensure timestamp is naturally aligned */ + struct { + s32 chans[3]; + s64 timestamp __aligned(8); + } scan; + struct iio_trigger *dready_trig; + bool dready_trigger_on; + int max_odr; + int irq; +}; + +static const struct { + int freq; + u8 reg_val; +} bmc150_magn_samp_freq_table[] = { {2, 0x01}, + {6, 0x02}, + {8, 0x03}, + {10, 0x00}, + {15, 0x04}, + {20, 0x05}, + {25, 0x06}, + {30, 0x07} }; + +enum bmc150_magn_presets { + LOW_POWER_PRESET, + REGULAR_PRESET, + ENHANCED_REGULAR_PRESET, + HIGH_ACCURACY_PRESET +}; + +static const struct bmc150_magn_preset { + u8 rep_xy; + u8 rep_z; + u8 odr; +} bmc150_magn_presets_table[] = { + [LOW_POWER_PRESET] = {3, 3, 10}, + [REGULAR_PRESET] = {9, 15, 10}, + [ENHANCED_REGULAR_PRESET] = {15, 27, 10}, + [HIGH_ACCURACY_PRESET] = {47, 83, 20}, +}; + +#define BMC150_MAGN_DEFAULT_PRESET REGULAR_PRESET + +static bool bmc150_magn_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMC150_MAGN_REG_POWER: + case BMC150_MAGN_REG_OPMODE_ODR: + case BMC150_MAGN_REG_INT: + case BMC150_MAGN_REG_INT_DRDY: + case BMC150_MAGN_REG_LOW_THRESH: + case BMC150_MAGN_REG_HIGH_THRESH: + case BMC150_MAGN_REG_REP_XY: + case BMC150_MAGN_REG_REP_Z: + return true; + default: + return false; + } +} + +static bool bmc150_magn_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMC150_MAGN_REG_X_L: + case BMC150_MAGN_REG_X_M: + case BMC150_MAGN_REG_Y_L: + case BMC150_MAGN_REG_Y_M: + case BMC150_MAGN_REG_Z_L: + case BMC150_MAGN_REG_Z_M: + case BMC150_MAGN_REG_RHALL_L: + case BMC150_MAGN_REG_RHALL_M: + case BMC150_MAGN_REG_INT_STATUS: + return true; + default: + return false; + } +} + +const struct regmap_config bmc150_magn_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMC150_MAGN_REG_TRIM_END, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmc150_magn_is_writeable_reg, + .volatile_reg = bmc150_magn_is_volatile_reg, +}; +EXPORT_SYMBOL_NS(bmc150_magn_regmap_config, IIO_BMC150_MAGN); + +static int bmc150_magn_set_power_mode(struct bmc150_magn_data *data, + enum bmc150_magn_power_modes mode, + bool state) +{ + int ret; + + switch (mode) { + case BMC150_MAGN_POWER_MODE_SUSPEND: + ret = regmap_update_bits(data->regmap, BMC150_MAGN_REG_POWER, + BMC150_MAGN_MASK_POWER_CTL, !state); + if (ret < 0) + return ret; + usleep_range(BMC150_MAGN_START_UP_TIME_MS * 1000, 20000); + return 0; + case BMC150_MAGN_POWER_MODE_SLEEP: + return regmap_update_bits(data->regmap, + BMC150_MAGN_REG_OPMODE_ODR, + BMC150_MAGN_MASK_OPMODE, + BMC150_MAGN_MODE_SLEEP << + BMC150_MAGN_SHIFT_OPMODE); + case BMC150_MAGN_POWER_MODE_NORMAL: + return regmap_update_bits(data->regmap, + BMC150_MAGN_REG_OPMODE_ODR, + BMC150_MAGN_MASK_OPMODE, + BMC150_MAGN_MODE_NORMAL << + BMC150_MAGN_SHIFT_OPMODE); + } + + return -EINVAL; +} + +static int bmc150_magn_set_power_state(struct bmc150_magn_data *data, bool on) +{ +#ifdef CONFIG_PM + int ret; + + if (on) { + ret = pm_runtime_resume_and_get(data->dev); + } else { + pm_runtime_mark_last_busy(data->dev); + ret = pm_runtime_put_autosuspend(data->dev); + } + + if (ret < 0) { + dev_err(data->dev, + "failed to change power state to %d\n", on); + return ret; + } +#endif + + return 0; +} + +static int bmc150_magn_get_odr(struct bmc150_magn_data *data, int *val) +{ + int ret, reg_val; + u8 i, odr_val; + + ret = regmap_read(data->regmap, BMC150_MAGN_REG_OPMODE_ODR, ®_val); + if (ret < 0) + return ret; + odr_val = (reg_val & BMC150_MAGN_MASK_ODR) >> BMC150_MAGN_SHIFT_ODR; + + for (i = 0; i < ARRAY_SIZE(bmc150_magn_samp_freq_table); i++) + if (bmc150_magn_samp_freq_table[i].reg_val == odr_val) { + *val = bmc150_magn_samp_freq_table[i].freq; + return 0; + } + + return -EINVAL; +} + +static int bmc150_magn_set_odr(struct bmc150_magn_data *data, int val) +{ + int ret; + u8 i; + + for (i = 0; i < ARRAY_SIZE(bmc150_magn_samp_freq_table); i++) { + if (bmc150_magn_samp_freq_table[i].freq == val) { + ret = regmap_update_bits(data->regmap, + BMC150_MAGN_REG_OPMODE_ODR, + BMC150_MAGN_MASK_ODR, + bmc150_magn_samp_freq_table[i]. + reg_val << + BMC150_MAGN_SHIFT_ODR); + if (ret < 0) + return ret; + return 0; + } + } + + return -EINVAL; +} + +static int bmc150_magn_set_max_odr(struct bmc150_magn_data *data, int rep_xy, + int rep_z, int odr) +{ + int ret, reg_val, max_odr; + + if (rep_xy <= 0) { + ret = regmap_read(data->regmap, BMC150_MAGN_REG_REP_XY, + ®_val); + if (ret < 0) + return ret; + rep_xy = BMC150_MAGN_REGVAL_TO_REPXY(reg_val); + } + if (rep_z <= 0) { + ret = regmap_read(data->regmap, BMC150_MAGN_REG_REP_Z, + ®_val); + if (ret < 0) + return ret; + rep_z = BMC150_MAGN_REGVAL_TO_REPZ(reg_val); + } + if (odr <= 0) { + ret = bmc150_magn_get_odr(data, &odr); + if (ret < 0) + return ret; + } + /* the maximum selectable read-out frequency from datasheet */ + max_odr = 1000000 / (145 * rep_xy + 500 * rep_z + 980); + if (odr > max_odr) { + dev_err(data->dev, + "Can't set oversampling with sampling freq %d\n", + odr); + return -EINVAL; + } + data->max_odr = max_odr; + + return 0; +} + +static s32 bmc150_magn_compensate_x(struct bmc150_magn_trim_regs *tregs, s16 x, + u16 rhall) +{ + s16 val; + u16 xyz1 = le16_to_cpu(tregs->xyz1); + + if (x == BMC150_MAGN_XY_OVERFLOW_VAL) + return S32_MIN; + + if (!rhall) + rhall = xyz1; + + val = ((s16)(((u16)((((s32)xyz1) << 14) / rhall)) - ((u16)0x4000))); + val = ((s16)((((s32)x) * ((((((((s32)tregs->xy2) * ((((s32)val) * + ((s32)val)) >> 7)) + (((s32)val) * + ((s32)(((s16)tregs->xy1) << 7)))) >> 9) + ((s32)0x100000)) * + ((s32)(((s16)tregs->x2) + ((s16)0xA0)))) >> 12)) >> 13)) + + (((s16)tregs->x1) << 3); + + return (s32)val; +} + +static s32 bmc150_magn_compensate_y(struct bmc150_magn_trim_regs *tregs, s16 y, + u16 rhall) +{ + s16 val; + u16 xyz1 = le16_to_cpu(tregs->xyz1); + + if (y == BMC150_MAGN_XY_OVERFLOW_VAL) + return S32_MIN; + + if (!rhall) + rhall = xyz1; + + val = ((s16)(((u16)((((s32)xyz1) << 14) / rhall)) - ((u16)0x4000))); + val = ((s16)((((s32)y) * ((((((((s32)tregs->xy2) * ((((s32)val) * + ((s32)val)) >> 7)) + (((s32)val) * + ((s32)(((s16)tregs->xy1) << 7)))) >> 9) + ((s32)0x100000)) * + ((s32)(((s16)tregs->y2) + ((s16)0xA0)))) >> 12)) >> 13)) + + (((s16)tregs->y1) << 3); + + return (s32)val; +} + +static s32 bmc150_magn_compensate_z(struct bmc150_magn_trim_regs *tregs, s16 z, + u16 rhall) +{ + s32 val; + u16 xyz1 = le16_to_cpu(tregs->xyz1); + u16 z1 = le16_to_cpu(tregs->z1); + s16 z2 = le16_to_cpu(tregs->z2); + s16 z3 = le16_to_cpu(tregs->z3); + s16 z4 = le16_to_cpu(tregs->z4); + + if (z == BMC150_MAGN_Z_OVERFLOW_VAL) + return S32_MIN; + + val = (((((s32)(z - z4)) << 15) - ((((s32)z3) * ((s32)(((s16)rhall) - + ((s16)xyz1)))) >> 2)) / (z2 + ((s16)(((((s32)z1) * + ((((s16)rhall) << 1))) + (1 << 15)) >> 16)))); + + return val; +} + +static int bmc150_magn_read_xyz(struct bmc150_magn_data *data, s32 *buffer) +{ + int ret; + __le16 values[AXIS_XYZR_MAX]; + s16 raw_x, raw_y, raw_z; + u16 rhall; + struct bmc150_magn_trim_regs tregs; + + ret = regmap_bulk_read(data->regmap, BMC150_MAGN_REG_X_L, + values, sizeof(values)); + if (ret < 0) + return ret; + + raw_x = (s16)le16_to_cpu(values[AXIS_X]) >> BMC150_MAGN_SHIFT_XY_L; + raw_y = (s16)le16_to_cpu(values[AXIS_Y]) >> BMC150_MAGN_SHIFT_XY_L; + raw_z = (s16)le16_to_cpu(values[AXIS_Z]) >> BMC150_MAGN_SHIFT_Z_L; + rhall = le16_to_cpu(values[RHALL]) >> BMC150_MAGN_SHIFT_RHALL_L; + + ret = regmap_bulk_read(data->regmap, BMC150_MAGN_REG_TRIM_START, + &tregs, sizeof(tregs)); + if (ret < 0) + return ret; + + buffer[AXIS_X] = bmc150_magn_compensate_x(&tregs, raw_x, rhall); + buffer[AXIS_Y] = bmc150_magn_compensate_y(&tregs, raw_y, rhall); + buffer[AXIS_Z] = bmc150_magn_compensate_z(&tregs, raw_z, rhall); + + return 0; +} + +static int bmc150_magn_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bmc150_magn_data *data = iio_priv(indio_dev); + int ret, tmp; + s32 values[AXIS_XYZ_MAX]; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + mutex_lock(&data->mutex); + + ret = bmc150_magn_set_power_state(data, true); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + + ret = bmc150_magn_read_xyz(data, values); + if (ret < 0) { + bmc150_magn_set_power_state(data, false); + mutex_unlock(&data->mutex); + return ret; + } + *val = values[chan->scan_index]; + + ret = bmc150_magn_set_power_state(data, false); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + + mutex_unlock(&data->mutex); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* + * The API/driver performs an off-chip temperature + * compensation and outputs x/y/z magnetic field data in + * 16 LSB/uT to the upper application layer. + */ + *val = 0; + *val2 = 625; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = bmc150_magn_get_odr(data, val); + if (ret < 0) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + switch (chan->channel2) { + case IIO_MOD_X: + case IIO_MOD_Y: + ret = regmap_read(data->regmap, BMC150_MAGN_REG_REP_XY, + &tmp); + if (ret < 0) + return ret; + *val = BMC150_MAGN_REGVAL_TO_REPXY(tmp); + return IIO_VAL_INT; + case IIO_MOD_Z: + ret = regmap_read(data->regmap, BMC150_MAGN_REG_REP_Z, + &tmp); + if (ret < 0) + return ret; + *val = BMC150_MAGN_REGVAL_TO_REPZ(tmp); + return IIO_VAL_INT; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int bmc150_magn_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bmc150_magn_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + if (val > data->max_odr) + return -EINVAL; + mutex_lock(&data->mutex); + ret = bmc150_magn_set_odr(data, val); + mutex_unlock(&data->mutex); + return ret; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + switch (chan->channel2) { + case IIO_MOD_X: + case IIO_MOD_Y: + if (val < 1 || val > 511) + return -EINVAL; + mutex_lock(&data->mutex); + ret = bmc150_magn_set_max_odr(data, val, 0, 0); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + ret = regmap_update_bits(data->regmap, + BMC150_MAGN_REG_REP_XY, + BMC150_MAGN_REG_REP_DATAMASK, + BMC150_MAGN_REPXY_TO_REGVAL + (val)); + mutex_unlock(&data->mutex); + return ret; + case IIO_MOD_Z: + if (val < 1 || val > 256) + return -EINVAL; + mutex_lock(&data->mutex); + ret = bmc150_magn_set_max_odr(data, 0, val, 0); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + ret = regmap_update_bits(data->regmap, + BMC150_MAGN_REG_REP_Z, + BMC150_MAGN_REG_REP_DATAMASK, + BMC150_MAGN_REPZ_TO_REGVAL + (val)); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static ssize_t bmc150_magn_show_samp_freq_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmc150_magn_data *data = iio_priv(indio_dev); + size_t len = 0; + u8 i; + + for (i = 0; i < ARRAY_SIZE(bmc150_magn_samp_freq_table); i++) { + if (bmc150_magn_samp_freq_table[i].freq > data->max_odr) + break; + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", + bmc150_magn_samp_freq_table[i].freq); + } + /* replace last space with a newline */ + buf[len - 1] = '\n'; + + return len; +} + +static const struct iio_mount_matrix * +bmc150_magn_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct bmc150_magn_data *data = iio_priv(indio_dev); + + return &data->orientation; +} + +static const struct iio_chan_spec_ext_info bmc150_magn_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bmc150_magn_get_mount_matrix), + { } +}; + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(bmc150_magn_show_samp_freq_avail); + +static struct attribute *bmc150_magn_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bmc150_magn_attrs_group = { + .attrs = bmc150_magn_attributes, +}; + +#define BMC150_MAGN_CHANNEL(_axis) { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = AXIS_##_axis, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 32, \ + .storagebits = 32, \ + .endianness = IIO_LE \ + }, \ + .ext_info = bmc150_magn_ext_info, \ +} + +static const struct iio_chan_spec bmc150_magn_channels[] = { + BMC150_MAGN_CHANNEL(X), + BMC150_MAGN_CHANNEL(Y), + BMC150_MAGN_CHANNEL(Z), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_info bmc150_magn_info = { + .attrs = &bmc150_magn_attrs_group, + .read_raw = bmc150_magn_read_raw, + .write_raw = bmc150_magn_write_raw, +}; + +static const unsigned long bmc150_magn_scan_masks[] = { + BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z), + 0}; + +static irqreturn_t bmc150_magn_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmc150_magn_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = bmc150_magn_read_xyz(data, data->scan.chans); + if (ret < 0) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + pf->timestamp); + +err: + mutex_unlock(&data->mutex); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int bmc150_magn_init(struct bmc150_magn_data *data) +{ + int ret, chip_id; + struct bmc150_magn_preset preset; + + ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators), + data->regulators); + if (ret < 0) { + dev_err(data->dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + /* + * 3ms power-on time according to datasheet, let's better + * be safe than sorry and set this delay to 5ms. + */ + msleep(5); + + ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, + false); + if (ret < 0) { + dev_err(data->dev, + "Failed to bring up device from suspend mode\n"); + goto err_regulator_disable; + } + + ret = regmap_read(data->regmap, BMC150_MAGN_REG_CHIP_ID, &chip_id); + if (ret < 0) { + dev_err(data->dev, "Failed reading chip id\n"); + goto err_poweroff; + } + if (chip_id != BMC150_MAGN_CHIP_ID_VAL) { + dev_err(data->dev, "Invalid chip id 0x%x\n", chip_id); + ret = -ENODEV; + goto err_poweroff; + } + dev_dbg(data->dev, "Chip id %x\n", chip_id); + + preset = bmc150_magn_presets_table[BMC150_MAGN_DEFAULT_PRESET]; + ret = bmc150_magn_set_odr(data, preset.odr); + if (ret < 0) { + dev_err(data->dev, "Failed to set ODR to %d\n", + preset.odr); + goto err_poweroff; + } + + ret = regmap_write(data->regmap, BMC150_MAGN_REG_REP_XY, + BMC150_MAGN_REPXY_TO_REGVAL(preset.rep_xy)); + if (ret < 0) { + dev_err(data->dev, "Failed to set REP XY to %d\n", + preset.rep_xy); + goto err_poweroff; + } + + ret = regmap_write(data->regmap, BMC150_MAGN_REG_REP_Z, + BMC150_MAGN_REPZ_TO_REGVAL(preset.rep_z)); + if (ret < 0) { + dev_err(data->dev, "Failed to set REP Z to %d\n", + preset.rep_z); + goto err_poweroff; + } + + ret = bmc150_magn_set_max_odr(data, preset.rep_xy, preset.rep_z, + preset.odr); + if (ret < 0) + goto err_poweroff; + + ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL, + true); + if (ret < 0) { + dev_err(data->dev, "Failed to power on device\n"); + goto err_poweroff; + } + + return 0; + +err_poweroff: + bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true); +err_regulator_disable: + regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); + return ret; +} + +static int bmc150_magn_reset_intr(struct bmc150_magn_data *data) +{ + int tmp; + + /* + * Data Ready (DRDY) is always cleared after + * readout of data registers ends. + */ + return regmap_read(data->regmap, BMC150_MAGN_REG_X_L, &tmp); +} + +static void bmc150_magn_trig_reen(struct iio_trigger *trig) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct bmc150_magn_data *data = iio_priv(indio_dev); + int ret; + + if (!data->dready_trigger_on) + return; + + mutex_lock(&data->mutex); + ret = bmc150_magn_reset_intr(data); + mutex_unlock(&data->mutex); + if (ret) + dev_err(data->dev, "Failed to reset interrupt\n"); +} + +static int bmc150_magn_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct bmc150_magn_data *data = iio_priv(indio_dev); + int ret = 0; + + mutex_lock(&data->mutex); + if (state == data->dready_trigger_on) + goto err_unlock; + + ret = regmap_update_bits(data->regmap, BMC150_MAGN_REG_INT_DRDY, + BMC150_MAGN_MASK_DRDY_EN, + state << BMC150_MAGN_SHIFT_DRDY_EN); + if (ret < 0) + goto err_unlock; + + data->dready_trigger_on = state; + + if (state) { + ret = bmc150_magn_reset_intr(data); + if (ret < 0) + goto err_unlock; + } + mutex_unlock(&data->mutex); + + return 0; + +err_unlock: + mutex_unlock(&data->mutex); + return ret; +} + +static const struct iio_trigger_ops bmc150_magn_trigger_ops = { + .set_trigger_state = bmc150_magn_data_rdy_trigger_set_state, + .reenable = bmc150_magn_trig_reen, +}; + +static int bmc150_magn_buffer_preenable(struct iio_dev *indio_dev) +{ + struct bmc150_magn_data *data = iio_priv(indio_dev); + + return bmc150_magn_set_power_state(data, true); +} + +static int bmc150_magn_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct bmc150_magn_data *data = iio_priv(indio_dev); + + return bmc150_magn_set_power_state(data, false); +} + +static const struct iio_buffer_setup_ops bmc150_magn_buffer_setup_ops = { + .preenable = bmc150_magn_buffer_preenable, + .postdisable = bmc150_magn_buffer_postdisable, +}; + +static const char *bmc150_magn_match_acpi_device(struct device *dev) +{ + const struct acpi_device_id *id; + + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return NULL; + + return dev_name(dev); +} + +int bmc150_magn_probe(struct device *dev, struct regmap *regmap, + int irq, const char *name) +{ + struct bmc150_magn_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + data->regmap = regmap; + data->irq = irq; + data->dev = dev; + + data->regulators[0].supply = "vdd"; + data->regulators[1].supply = "vddio"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), + data->regulators); + if (ret) + return dev_err_probe(dev, ret, "failed to get regulators\n"); + + ret = iio_read_mount_matrix(dev, &data->orientation); + if (ret) + return ret; + + if (!name && ACPI_HANDLE(dev)) + name = bmc150_magn_match_acpi_device(dev); + + mutex_init(&data->mutex); + + ret = bmc150_magn_init(data); + if (ret < 0) + return ret; + + indio_dev->channels = bmc150_magn_channels; + indio_dev->num_channels = ARRAY_SIZE(bmc150_magn_channels); + indio_dev->available_scan_masks = bmc150_magn_scan_masks; + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &bmc150_magn_info; + + if (irq > 0) { + data->dready_trig = devm_iio_trigger_alloc(dev, + "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!data->dready_trig) { + ret = -ENOMEM; + dev_err(dev, "iio trigger alloc failed\n"); + goto err_poweroff; + } + + data->dready_trig->ops = &bmc150_magn_trigger_ops; + iio_trigger_set_drvdata(data->dready_trig, indio_dev); + ret = iio_trigger_register(data->dready_trig); + if (ret) { + dev_err(dev, "iio trigger register failed\n"); + goto err_poweroff; + } + + ret = request_threaded_irq(irq, + iio_trigger_generic_data_rdy_poll, + NULL, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + BMC150_MAGN_IRQ_NAME, + data->dready_trig); + if (ret < 0) { + dev_err(dev, "request irq %d failed\n", irq); + goto err_trigger_unregister; + } + } + + ret = iio_triggered_buffer_setup(indio_dev, + iio_pollfunc_store_time, + bmc150_magn_trigger_handler, + &bmc150_magn_buffer_setup_ops); + if (ret < 0) { + dev_err(dev, "iio triggered buffer setup failed\n"); + goto err_free_irq; + } + + ret = pm_runtime_set_active(dev); + if (ret) + goto err_buffer_cleanup; + + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, + BMC150_MAGN_AUTO_SUSPEND_DELAY_MS); + pm_runtime_use_autosuspend(dev); + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(dev, "unable to register iio device\n"); + goto err_pm_cleanup; + } + + dev_dbg(dev, "Registered device %s\n", name); + return 0; + +err_pm_cleanup: + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_disable(dev); +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +err_free_irq: + if (irq > 0) + free_irq(irq, data->dready_trig); +err_trigger_unregister: + if (data->dready_trig) + iio_trigger_unregister(data->dready_trig); +err_poweroff: + bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true); + return ret; +} +EXPORT_SYMBOL_NS(bmc150_magn_probe, IIO_BMC150_MAGN); + +void bmc150_magn_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_magn_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + + iio_triggered_buffer_cleanup(indio_dev); + + if (data->irq > 0) + free_irq(data->irq, data->dready_trig); + + if (data->dready_trig) + iio_trigger_unregister(data->dready_trig); + + mutex_lock(&data->mutex); + bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true); + mutex_unlock(&data->mutex); + + regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); +} +EXPORT_SYMBOL_NS(bmc150_magn_remove, IIO_BMC150_MAGN); + +#ifdef CONFIG_PM +static int bmc150_magn_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_magn_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SLEEP, + true); + mutex_unlock(&data->mutex); + if (ret < 0) { + dev_err(dev, "powering off device failed\n"); + return ret; + } + return 0; +} + +/* + * Should be called with data->mutex held. + */ +static int bmc150_magn_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_magn_data *data = iio_priv(indio_dev); + + return bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL, + true); +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int bmc150_magn_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_magn_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SLEEP, + true); + mutex_unlock(&data->mutex); + + return ret; +} + +static int bmc150_magn_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmc150_magn_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL, + true); + mutex_unlock(&data->mutex); + + return ret; +} +#endif + +const struct dev_pm_ops bmc150_magn_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(bmc150_magn_suspend, bmc150_magn_resume) + SET_RUNTIME_PM_OPS(bmc150_magn_runtime_suspend, + bmc150_magn_runtime_resume, NULL) +}; +EXPORT_SYMBOL_NS(bmc150_magn_pm_ops, IIO_BMC150_MAGN); + +MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("BMC150 magnetometer core driver"); diff --git a/drivers/iio/magnetometer/bmc150_magn.h b/drivers/iio/magnetometer/bmc150_magn.h new file mode 100644 index 0000000000..98c086d10c --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _BMC150_MAGN_H_ +#define _BMC150_MAGN_H_ + +extern const struct regmap_config bmc150_magn_regmap_config; +extern const struct dev_pm_ops bmc150_magn_pm_ops; + +int bmc150_magn_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name); +void bmc150_magn_remove(struct device *dev); + +#endif /* _BMC150_MAGN_H_ */ diff --git a/drivers/iio/magnetometer/bmc150_magn_i2c.c b/drivers/iio/magnetometer/bmc150_magn_i2c.c new file mode 100644 index 0000000000..281d1fa31c --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn_i2c.c @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * 3-axis magnetometer driver supporting following I2C Bosch-Sensortec chips: + * - BMC150 + * - BMC156 + * - BMM150 + * + * Copyright (c) 2016, Intel Corporation. + */ +#include <linux/device.h> +#include <linux/mod_devicetable.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/regmap.h> + +#include "bmc150_magn.h" + +static int bmc150_magn_i2c_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + struct regmap *regmap; + const char *name = NULL; + + regmap = devm_regmap_init_i2c(client, &bmc150_magn_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to initialize i2c regmap\n"); + return PTR_ERR(regmap); + } + + if (id) + name = id->name; + + return bmc150_magn_probe(&client->dev, regmap, client->irq, name); +} + +static void bmc150_magn_i2c_remove(struct i2c_client *client) +{ + bmc150_magn_remove(&client->dev); +} + +static const struct acpi_device_id bmc150_magn_acpi_match[] = { + {"BMC150B", 0}, + {"BMC156B", 0}, + {"BMM150B", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); + +static const struct i2c_device_id bmc150_magn_i2c_id[] = { + {"bmc150_magn", 0}, + {"bmc156_magn", 0}, + {"bmm150_magn", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, bmc150_magn_i2c_id); + +static const struct of_device_id bmc150_magn_of_match[] = { + { .compatible = "bosch,bmc150_magn" }, + { .compatible = "bosch,bmc156_magn" }, + { .compatible = "bosch,bmm150_magn" }, /* deprecated compatible */ + { .compatible = "bosch,bmm150" }, + { } +}; +MODULE_DEVICE_TABLE(of, bmc150_magn_of_match); + +static struct i2c_driver bmc150_magn_driver = { + .driver = { + .name = "bmc150_magn_i2c", + .of_match_table = bmc150_magn_of_match, + .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), + .pm = &bmc150_magn_pm_ops, + }, + .probe = bmc150_magn_i2c_probe, + .remove = bmc150_magn_i2c_remove, + .id_table = bmc150_magn_i2c_id, +}; +module_i2c_driver(bmc150_magn_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("BMC150 I2C magnetometer driver"); +MODULE_IMPORT_NS(IIO_BMC150_MAGN); diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c new file mode 100644 index 0000000000..8829877210 --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn_spi.c @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * 3-axis magnetometer driver support following SPI Bosch-Sensortec chips: + * - BMC150 + * - BMC156 + * - BMM150 + * + * Copyright (c) 2016, Intel Corporation. + */ +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/spi/spi.h> +#include <linux/acpi.h> +#include <linux/regmap.h> + +#include "bmc150_magn.h" + +static int bmc150_magn_spi_probe(struct spi_device *spi) +{ + struct regmap *regmap; + const struct spi_device_id *id = spi_get_device_id(spi); + + regmap = devm_regmap_init_spi(spi, &bmc150_magn_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Failed to register spi regmap: %pe\n", + regmap); + return PTR_ERR(regmap); + } + return bmc150_magn_probe(&spi->dev, regmap, spi->irq, id->name); +} + +static void bmc150_magn_spi_remove(struct spi_device *spi) +{ + bmc150_magn_remove(&spi->dev); +} + +static const struct spi_device_id bmc150_magn_spi_id[] = { + {"bmc150_magn", 0}, + {"bmc156_magn", 0}, + {"bmm150_magn", 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, bmc150_magn_spi_id); + +static const struct acpi_device_id bmc150_magn_acpi_match[] = { + {"BMC150B", 0}, + {"BMC156B", 0}, + {"BMM150B", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); + +static struct spi_driver bmc150_magn_spi_driver = { + .probe = bmc150_magn_spi_probe, + .remove = bmc150_magn_spi_remove, + .id_table = bmc150_magn_spi_id, + .driver = { + .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), + .name = "bmc150_magn_spi", + }, +}; +module_spi_driver(bmc150_magn_spi_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_DESCRIPTION("BMC150 magnetometer SPI driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_BMC150_MAGN); diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c new file mode 100644 index 0000000000..e85a3a8eea --- /dev/null +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -0,0 +1,586 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * HID Sensors Driver + * Copyright (c) 2012, Intel Corporation. + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/hid-sensor-hub.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include "../common/hid-sensors/hid-sensor-trigger.h" + +enum magn_3d_channel { + CHANNEL_SCAN_INDEX_X, + CHANNEL_SCAN_INDEX_Y, + CHANNEL_SCAN_INDEX_Z, + CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP, + CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP, + CHANNEL_SCAN_INDEX_NORTH_MAGN, + CHANNEL_SCAN_INDEX_NORTH_TRUE, + CHANNEL_SCAN_INDEX_TIMESTAMP, + MAGN_3D_CHANNEL_MAX, +}; + +struct common_attributes { + int scale_pre_decml; + int scale_post_decml; + int scale_precision; + int value_offset; +}; + +struct magn_3d_state { + struct hid_sensor_hub_callbacks callbacks; + struct hid_sensor_common magn_flux_attributes; + struct hid_sensor_common rot_attributes; + struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX]; + + /* dynamically sized array to hold sensor values */ + u32 *iio_vals; + /* array of pointers to sensor value */ + u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX]; + + struct common_attributes magn_flux_attr; + struct common_attributes rot_attr; + s64 timestamp; +}; + +static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = { + HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS, + HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS, + HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS, + HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH, + HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH, + HID_USAGE_SENSOR_ORIENT_MAGN_NORTH, + HID_USAGE_SENSOR_ORIENT_TRUE_NORTH, + HID_USAGE_SENSOR_TIME_TIMESTAMP, +}; + +static const u32 magn_3d_sensitivity_addresses[] = { + HID_USAGE_SENSOR_DATA_ORIENTATION, + HID_USAGE_SENSOR_ORIENT_MAGN_FLUX, +}; + +/* Channel definitions */ +static const struct iio_chan_spec magn_3d_channels[] = { + { + .type = IIO_MAGN, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + }, { + .type = IIO_MAGN, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + }, { + .type = IIO_MAGN, + .modified = 1, + .channel2 = IIO_MOD_Z, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + }, { + .type = IIO_ROT, + .modified = 1, + .channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + }, { + .type = IIO_ROT, + .modified = 1, + .channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + }, { + .type = IIO_ROT, + .modified = 1, + .channel2 = IIO_MOD_NORTH_MAGN, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + }, { + .type = IIO_ROT, + .modified = 1, + .channel2 = IIO_MOD_NORTH_TRUE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + }, + IIO_CHAN_SOFT_TIMESTAMP(7) +}; + +/* Adjust channel real bits based on report descriptor */ +static void magn_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels, + int channel, int size) +{ + channels[channel].scan_type.sign = 's'; + /* Real storage bits will change based on the report desc. */ + channels[channel].scan_type.realbits = size * 8; + /* Maximum size of a sample to capture is u32 */ + channels[channel].scan_type.storagebits = sizeof(u32) * 8; +} + +/* Channel read_raw handler */ +static int magn_3d_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct magn_3d_state *magn_state = iio_priv(indio_dev); + int report_id = -1; + u32 address; + int ret_type; + s32 min; + + *val = 0; + *val2 = 0; + switch (mask) { + case IIO_CHAN_INFO_RAW: + hid_sensor_power_state(&magn_state->magn_flux_attributes, true); + report_id = magn_state->magn[chan->address].report_id; + min = magn_state->magn[chan->address].logical_minimum; + address = magn_3d_addresses[chan->address]; + if (report_id >= 0) + *val = sensor_hub_input_attr_get_raw_value( + magn_state->magn_flux_attributes.hsdev, + HID_USAGE_SENSOR_COMPASS_3D, address, + report_id, + SENSOR_HUB_SYNC, + min < 0); + else { + *val = 0; + hid_sensor_power_state( + &magn_state->magn_flux_attributes, + false); + return -EINVAL; + } + hid_sensor_power_state(&magn_state->magn_flux_attributes, + false); + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_MAGN: + *val = magn_state->magn_flux_attr.scale_pre_decml; + *val2 = magn_state->magn_flux_attr.scale_post_decml; + ret_type = magn_state->magn_flux_attr.scale_precision; + break; + case IIO_ROT: + *val = magn_state->rot_attr.scale_pre_decml; + *val2 = magn_state->rot_attr.scale_post_decml; + ret_type = magn_state->rot_attr.scale_precision; + break; + default: + ret_type = -EINVAL; + } + break; + case IIO_CHAN_INFO_OFFSET: + switch (chan->type) { + case IIO_MAGN: + *val = magn_state->magn_flux_attr.value_offset; + ret_type = IIO_VAL_INT; + break; + case IIO_ROT: + *val = magn_state->rot_attr.value_offset; + ret_type = IIO_VAL_INT; + break; + default: + ret_type = -EINVAL; + } + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret_type = hid_sensor_read_samp_freq_value( + &magn_state->magn_flux_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + switch (chan->type) { + case IIO_MAGN: + ret_type = hid_sensor_read_raw_hyst_value( + &magn_state->magn_flux_attributes, val, val2); + break; + case IIO_ROT: + ret_type = hid_sensor_read_raw_hyst_value( + &magn_state->rot_attributes, val, val2); + break; + default: + ret_type = -EINVAL; + } + break; + default: + ret_type = -EINVAL; + break; + } + + return ret_type; +} + +/* Channel write_raw handler */ +static int magn_3d_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct magn_3d_state *magn_state = iio_priv(indio_dev); + int ret = 0; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = hid_sensor_write_samp_freq_value( + &magn_state->magn_flux_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + switch (chan->type) { + case IIO_MAGN: + ret = hid_sensor_write_raw_hyst_value( + &magn_state->magn_flux_attributes, val, val2); + break; + case IIO_ROT: + ret = hid_sensor_write_raw_hyst_value( + &magn_state->rot_attributes, val, val2); + break; + default: + ret = -EINVAL; + } + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static const struct iio_info magn_3d_info = { + .read_raw = &magn_3d_read_raw, + .write_raw = &magn_3d_write_raw, +}; + +/* Callback handler to send event after all samples are received and captured */ +static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct magn_3d_state *magn_state = iio_priv(indio_dev); + + dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n"); + if (atomic_read(&magn_state->magn_flux_attributes.data_ready)) { + if (!magn_state->timestamp) + magn_state->timestamp = iio_get_time_ns(indio_dev); + + iio_push_to_buffers_with_timestamp(indio_dev, + magn_state->iio_vals, + magn_state->timestamp); + magn_state->timestamp = 0; + } + + return 0; +} + +/* Capture samples in local storage */ +static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + size_t raw_len, char *raw_data, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct magn_3d_state *magn_state = iio_priv(indio_dev); + int offset; + int ret = 0; + u32 *iio_val = NULL; + + switch (usage_id) { + case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS: + case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS: + case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS: + offset = (usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS) + + CHANNEL_SCAN_INDEX_X; + break; + case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH: + case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH: + case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH: + case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH: + offset = (usage_id - HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH) + + CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP; + break; + case HID_USAGE_SENSOR_TIME_TIMESTAMP: + magn_state->timestamp = + hid_sensor_convert_timestamp(&magn_state->magn_flux_attributes, + *(s64 *)raw_data); + return ret; + default: + return -EINVAL; + } + + iio_val = magn_state->magn_val_addr[offset]; + + if (iio_val != NULL) + *iio_val = *((u32 *)raw_data); + else + ret = -EINVAL; + + return ret; +} + +/* Parse report which is specific to an usage id*/ +static int magn_3d_parse_report(struct platform_device *pdev, + struct hid_sensor_hub_device *hsdev, + struct iio_chan_spec **channels, + int *chan_count, + unsigned usage_id, + struct magn_3d_state *st) +{ + int i; + int attr_count = 0; + struct iio_chan_spec *_channels; + + /* Scan for each usage attribute supported */ + for (i = 0; i < MAGN_3D_CHANNEL_MAX; i++) { + int status; + u32 address = magn_3d_addresses[i]; + + /* Check if usage attribute exists in the sensor hub device */ + status = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + address, + &(st->magn[i])); + if (!status) + attr_count++; + } + + if (attr_count <= 0) { + dev_err(&pdev->dev, + "failed to find any supported usage attributes in report\n"); + return -EINVAL; + } + + dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n", + attr_count); + dev_dbg(&pdev->dev, "magn_3d X: %x:%x Y: %x:%x Z: %x:%x\n", + st->magn[0].index, + st->magn[0].report_id, + st->magn[1].index, st->magn[1].report_id, + st->magn[2].index, st->magn[2].report_id); + + /* Setup IIO channel array */ + _channels = devm_kcalloc(&pdev->dev, attr_count, + sizeof(struct iio_chan_spec), + GFP_KERNEL); + if (!_channels) { + dev_err(&pdev->dev, + "failed to allocate space for iio channels\n"); + return -ENOMEM; + } + + /* attr_count include timestamp channel, and the iio_vals should be aligned to 8byte */ + st->iio_vals = devm_kcalloc(&pdev->dev, + ((attr_count + 1) % 2 + (attr_count + 1) / 2) * 2, + sizeof(u32), GFP_KERNEL); + if (!st->iio_vals) { + dev_err(&pdev->dev, + "failed to allocate space for iio values array\n"); + return -ENOMEM; + } + + for (i = 0, *chan_count = 0; + i < MAGN_3D_CHANNEL_MAX && *chan_count < attr_count; + i++){ + if (st->magn[i].index >= 0) { + /* Setup IIO channel struct */ + (_channels[*chan_count]) = magn_3d_channels[i]; + (_channels[*chan_count]).scan_index = *chan_count; + (_channels[*chan_count]).address = i; + + if (i != CHANNEL_SCAN_INDEX_TIMESTAMP) { + /* Set magn_val_addr to iio value address */ + st->magn_val_addr[i] = &st->iio_vals[*chan_count]; + magn_3d_adjust_channel_bit_mask(_channels, + *chan_count, + st->magn[i].size); + } + (*chan_count)++; + } + } + + if (*chan_count <= 0) { + dev_err(&pdev->dev, + "failed to find any magnetic channels setup\n"); + return -EINVAL; + } + + *channels = _channels; + + dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n", + *chan_count); + + st->magn_flux_attr.scale_precision = hid_sensor_format_scale( + HID_USAGE_SENSOR_COMPASS_3D, + &st->magn[CHANNEL_SCAN_INDEX_X], + &st->magn_flux_attr.scale_pre_decml, + &st->magn_flux_attr.scale_post_decml); + st->rot_attr.scale_precision + = hid_sensor_format_scale( + HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH, + &st->magn[CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP], + &st->rot_attr.scale_pre_decml, + &st->rot_attr.scale_post_decml); + + if (st->rot_attributes.sensitivity.index < 0) { + sensor_hub_input_get_attribute_info(hsdev, + HID_FEATURE_REPORT, usage_id, + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | + HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH, + &st->rot_attributes.sensitivity); + dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", + st->rot_attributes.sensitivity.index, + st->rot_attributes.sensitivity.report_id); + } + + return 0; +} + +/* Function to initialize the processing for usage id */ +static int hid_magn_3d_probe(struct platform_device *pdev) +{ + int ret = 0; + static char *name = "magn_3d"; + struct iio_dev *indio_dev; + struct magn_3d_state *magn_state; + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_chan_spec *channels; + int chan_count = 0; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct magn_3d_state)); + if (indio_dev == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, indio_dev); + + magn_state = iio_priv(indio_dev); + magn_state->magn_flux_attributes.hsdev = hsdev; + magn_state->magn_flux_attributes.pdev = pdev; + + ret = hid_sensor_parse_common_attributes(hsdev, + HID_USAGE_SENSOR_COMPASS_3D, + &magn_state->magn_flux_attributes, + magn_3d_sensitivity_addresses, + ARRAY_SIZE(magn_3d_sensitivity_addresses)); + if (ret) { + dev_err(&pdev->dev, "failed to setup common attributes\n"); + return ret; + } + magn_state->rot_attributes = magn_state->magn_flux_attributes; + /* sensitivity of rot_attribute is not the same as magn_flux_attributes */ + magn_state->rot_attributes.sensitivity.index = -1; + + ret = magn_3d_parse_report(pdev, hsdev, + &channels, &chan_count, + HID_USAGE_SENSOR_COMPASS_3D, magn_state); + if (ret) { + dev_err(&pdev->dev, "failed to parse report\n"); + return ret; + } + + indio_dev->channels = channels; + indio_dev->num_channels = chan_count; + indio_dev->info = &magn_3d_info; + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + + atomic_set(&magn_state->magn_flux_attributes.data_ready, 0); + + ret = hid_sensor_setup_trigger(indio_dev, name, + &magn_state->magn_flux_attributes); + if (ret < 0) { + dev_err(&pdev->dev, "trigger setup failed\n"); + return ret; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "device register failed\n"); + goto error_remove_trigger; + } + + magn_state->callbacks.send_event = magn_3d_proc_event; + magn_state->callbacks.capture_sample = magn_3d_capture_sample; + magn_state->callbacks.pdev = pdev; + ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D, + &magn_state->callbacks); + if (ret < 0) { + dev_err(&pdev->dev, "callback reg failed\n"); + goto error_iio_unreg; + } + + return ret; + +error_iio_unreg: + iio_device_unregister(indio_dev); +error_remove_trigger: + hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes); + return ret; +} + +/* Function to deinitialize the processing for usage id */ +static int hid_magn_3d_remove(struct platform_device *pdev) +{ + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct magn_3d_state *magn_state = iio_priv(indio_dev); + + sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D); + iio_device_unregister(indio_dev); + hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes); + + return 0; +} + +static const struct platform_device_id hid_magn_3d_ids[] = { + { + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-200083", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, hid_magn_3d_ids); + +static struct platform_driver hid_magn_3d_platform_driver = { + .id_table = hid_magn_3d_ids, + .driver = { + .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, + }, + .probe = hid_magn_3d_probe, + .remove = hid_magn_3d_remove, +}; +module_platform_driver(hid_magn_3d_platform_driver); + +MODULE_DESCRIPTION("HID Sensor Magnetometer 3D"); +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HID); diff --git a/drivers/iio/magnetometer/hmc5843.h b/drivers/iio/magnetometer/hmc5843.h new file mode 100644 index 0000000000..60fbb5431c --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Header file for hmc5843 driver + * + * Split from hmc5843.c + * Copyright (C) Josef Gajdusek <atx@atx.name> + */ + +#ifndef HMC5843_CORE_H +#define HMC5843_CORE_H + +#include <linux/regmap.h> +#include <linux/iio/iio.h> + +#define HMC5843_CONFIG_REG_A 0x00 +#define HMC5843_CONFIG_REG_B 0x01 +#define HMC5843_MODE_REG 0x02 +#define HMC5843_DATA_OUT_MSB_REGS 0x03 +#define HMC5843_STATUS_REG 0x09 +#define HMC5843_ID_REG 0x0a +#define HMC5843_ID_END 0x0c + +enum hmc5843_ids { + HMC5843_ID, + HMC5883_ID, + HMC5883L_ID, + HMC5983_ID, +}; + +/** + * struct hmc5843_data - device specific data + * @dev: actual device + * @lock: update and read regmap data + * @regmap: hardware access register maps + * @variant: describe chip variants + * @scan: buffer to pack data for passing to + * iio_push_to_buffers_with_timestamp() + */ +struct hmc5843_data { + struct device *dev; + struct mutex lock; + struct regmap *regmap; + const struct hmc5843_chip_info *variant; + struct iio_mount_matrix orientation; + struct { + __be16 chans[3]; + s64 timestamp __aligned(8); + } scan; +}; + +int hmc5843_common_probe(struct device *dev, struct regmap *regmap, + enum hmc5843_ids id, const char *name); +void hmc5843_common_remove(struct device *dev); + +extern const struct dev_pm_ops hmc5843_pm_ops; +#endif /* HMC5843_CORE_H */ diff --git a/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c new file mode 100644 index 0000000000..c5521d61da --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843_core.c @@ -0,0 +1,688 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device driver for the HMC5843 multi-chip module designed + * for low field magnetic sensing. + * + * Copyright (C) 2010 Texas Instruments + * + * Author: Shubhrajyoti Datta <shubhrajyoti@ti.com> + * Acknowledgment: Jonathan Cameron <jic23@kernel.org> for valuable inputs. + * Support for HMC5883 and HMC5883L by Peter Meerwald <pmeerw@pmeerw.net>. + * Split to multiple files by Josef Gajdusek <atx@atx.name> - 2014 + */ + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/delay.h> + +#include "hmc5843.h" + +/* + * Range gain settings in (+-)Ga + * Beware: HMC5843 and HMC5883 have different recommended sensor field + * ranges; default corresponds to +-1.0 Ga and +-1.3 Ga, respectively + */ +#define HMC5843_RANGE_GAIN_OFFSET 0x05 +#define HMC5843_RANGE_GAIN_DEFAULT 0x01 +#define HMC5843_RANGE_GAIN_MASK 0xe0 + +/* Device status */ +#define HMC5843_DATA_READY 0x01 +#define HMC5843_DATA_OUTPUT_LOCK 0x02 + +/* Mode register configuration */ +#define HMC5843_MODE_CONVERSION_CONTINUOUS 0x00 +#define HMC5843_MODE_CONVERSION_SINGLE 0x01 +#define HMC5843_MODE_IDLE 0x02 +#define HMC5843_MODE_SLEEP 0x03 +#define HMC5843_MODE_MASK 0x03 + +/* + * HMC5843: Minimum data output rate + * HMC5883: Typical data output rate + */ +#define HMC5843_RATE_OFFSET 0x02 +#define HMC5843_RATE_DEFAULT 0x04 +#define HMC5843_RATE_MASK 0x1c + +/* Device measurement configuration */ +#define HMC5843_MEAS_CONF_NORMAL 0x00 +#define HMC5843_MEAS_CONF_POSITIVE_BIAS 0x01 +#define HMC5843_MEAS_CONF_NEGATIVE_BIAS 0x02 +#define HMC5843_MEAS_CONF_MASK 0x03 + +/* + * API for setting the measurement configuration to + * Normal, Positive bias and Negative bias + * + * From the datasheet: + * 0 - Normal measurement configuration (default): In normal measurement + * configuration the device follows normal measurement flow. Pins BP + * and BN are left floating and high impedance. + * + * 1 - Positive bias configuration: In positive bias configuration, a + * positive current is forced across the resistive load on pins BP + * and BN. + * + * 2 - Negative bias configuration. In negative bias configuration, a + * negative current is forced across the resistive load on pins BP + * and BN. + * + * 3 - Only available on HMC5983. Magnetic sensor is disabled. + * Temperature sensor is enabled. + */ + +static const char *const hmc5843_meas_conf_modes[] = {"normal", "positivebias", + "negativebias"}; + +static const char *const hmc5983_meas_conf_modes[] = {"normal", "positivebias", + "negativebias", + "disabled"}; +/* Scaling factors: 10000000/Gain */ +static const int hmc5843_regval_to_nanoscale[] = { + 6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714 +}; + +static const int hmc5883_regval_to_nanoscale[] = { + 7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662 +}; + +static const int hmc5883l_regval_to_nanoscale[] = { + 7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478 +}; + +/* + * From the datasheet: + * Value | HMC5843 | HMC5883/HMC5883L + * | Data output rate (Hz) | Data output rate (Hz) + * 0 | 0.5 | 0.75 + * 1 | 1 | 1.5 + * 2 | 2 | 3 + * 3 | 5 | 7.5 + * 4 | 10 (default) | 15 + * 5 | 20 | 30 + * 6 | 50 | 75 + * 7 | Not used | Not used + */ +static const int hmc5843_regval_to_samp_freq[][2] = { + {0, 500000}, {1, 0}, {2, 0}, {5, 0}, {10, 0}, {20, 0}, {50, 0} +}; + +static const int hmc5883_regval_to_samp_freq[][2] = { + {0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0}, + {75, 0} +}; + +static const int hmc5983_regval_to_samp_freq[][2] = { + {0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0}, + {75, 0}, {220, 0} +}; + +/* Describe chip variants */ +struct hmc5843_chip_info { + const struct iio_chan_spec *channels; + const int (*regval_to_samp_freq)[2]; + const int n_regval_to_samp_freq; + const int *regval_to_nanoscale; + const int n_regval_to_nanoscale; +}; + +/* The lower two bits contain the current conversion mode */ +static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_MODE_REG, + HMC5843_MODE_MASK, operating_mode); + mutex_unlock(&data->lock); + + return ret; +} + +static int hmc5843_wait_measurement(struct hmc5843_data *data) +{ + int tries = 150; + unsigned int val; + int ret; + + while (tries-- > 0) { + ret = regmap_read(data->regmap, HMC5843_STATUS_REG, &val); + if (ret < 0) + return ret; + if (val & HMC5843_DATA_READY) + break; + msleep(20); + } + + if (tries < 0) { + dev_err(data->dev, "data not ready\n"); + return -EIO; + } + + return 0; +} + +/* Return the measurement value from the specified channel */ +static int hmc5843_read_measurement(struct hmc5843_data *data, + int idx, int *val) +{ + __be16 values[3]; + int ret; + + mutex_lock(&data->lock); + ret = hmc5843_wait_measurement(data); + if (ret < 0) { + mutex_unlock(&data->lock); + return ret; + } + ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, + values, sizeof(values)); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + + *val = sign_extend32(be16_to_cpu(values[idx]), 15); + return IIO_VAL_INT; +} + +static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, + HMC5843_MEAS_CONF_MASK, meas_conf); + mutex_unlock(&data->lock); + + return ret; +} + +static +int hmc5843_show_measurement_configuration(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &val); + if (ret) + return ret; + + return val & HMC5843_MEAS_CONF_MASK; +} + +static +int hmc5843_set_measurement_configuration(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int meas_conf) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + + return hmc5843_set_meas_conf(data, meas_conf); +} + +static const struct iio_mount_matrix * +hmc5843_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + + return &data->orientation; +} + +static const struct iio_enum hmc5843_meas_conf_enum = { + .items = hmc5843_meas_conf_modes, + .num_items = ARRAY_SIZE(hmc5843_meas_conf_modes), + .get = hmc5843_show_measurement_configuration, + .set = hmc5843_set_measurement_configuration, +}; + +static const struct iio_chan_spec_ext_info hmc5843_ext_info[] = { + IIO_ENUM("meas_conf", IIO_SHARED_BY_TYPE, &hmc5843_meas_conf_enum), + IIO_ENUM_AVAILABLE("meas_conf", IIO_SHARED_BY_TYPE, &hmc5843_meas_conf_enum), + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, hmc5843_get_mount_matrix), + { } +}; + +static const struct iio_enum hmc5983_meas_conf_enum = { + .items = hmc5983_meas_conf_modes, + .num_items = ARRAY_SIZE(hmc5983_meas_conf_modes), + .get = hmc5843_show_measurement_configuration, + .set = hmc5843_set_measurement_configuration, +}; + +static const struct iio_chan_spec_ext_info hmc5983_ext_info[] = { + IIO_ENUM("meas_conf", IIO_SHARED_BY_TYPE, &hmc5983_meas_conf_enum), + IIO_ENUM_AVAILABLE("meas_conf", IIO_SHARED_BY_TYPE, &hmc5983_meas_conf_enum), + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, hmc5843_get_mount_matrix), + { } +}; + +static +ssize_t hmc5843_show_samp_freq_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev)); + size_t len = 0; + int i; + + for (i = 0; i < data->variant->n_regval_to_samp_freq; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, + "%d.%d ", data->variant->regval_to_samp_freq[i][0], + data->variant->regval_to_samp_freq[i][1]); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_samp_freq_avail); + +static int hmc5843_set_samp_freq(struct hmc5843_data *data, u8 rate) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, + HMC5843_RATE_MASK, + rate << HMC5843_RATE_OFFSET); + mutex_unlock(&data->lock); + + return ret; +} + +static int hmc5843_get_samp_freq_index(struct hmc5843_data *data, + int val, int val2) +{ + int i; + + for (i = 0; i < data->variant->n_regval_to_samp_freq; i++) + if (val == data->variant->regval_to_samp_freq[i][0] && + val2 == data->variant->regval_to_samp_freq[i][1]) + return i; + + return -EINVAL; +} + +static int hmc5843_set_range_gain(struct hmc5843_data *data, u8 range) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_B, + HMC5843_RANGE_GAIN_MASK, + range << HMC5843_RANGE_GAIN_OFFSET); + mutex_unlock(&data->lock); + + return ret; +} + +static ssize_t hmc5843_show_scale_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev)); + + size_t len = 0; + int i; + + for (i = 0; i < data->variant->n_regval_to_nanoscale; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, + "0.%09d ", data->variant->regval_to_nanoscale[i]); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEVICE_ATTR(scale_available, S_IRUGO, + hmc5843_show_scale_avail, NULL, 0); + +static int hmc5843_get_scale_index(struct hmc5843_data *data, int val, int val2) +{ + int i; + + if (val) + return -EINVAL; + + for (i = 0; i < data->variant->n_regval_to_nanoscale; i++) + if (val2 == data->variant->regval_to_nanoscale[i]) + return i; + + return -EINVAL; +} + +static int hmc5843_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + unsigned int rval; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return hmc5843_read_measurement(data, chan->scan_index, val); + case IIO_CHAN_INFO_SCALE: + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_B, &rval); + if (ret < 0) + return ret; + rval >>= HMC5843_RANGE_GAIN_OFFSET; + *val = 0; + *val2 = data->variant->regval_to_nanoscale[rval]; + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &rval); + if (ret < 0) + return ret; + rval >>= HMC5843_RATE_OFFSET; + *val = data->variant->regval_to_samp_freq[rval][0]; + *val2 = data->variant->regval_to_samp_freq[rval][1]; + return IIO_VAL_INT_PLUS_MICRO; + } + return -EINVAL; +} + +static int hmc5843_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + int rate, range; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + rate = hmc5843_get_samp_freq_index(data, val, val2); + if (rate < 0) + return -EINVAL; + + return hmc5843_set_samp_freq(data, rate); + case IIO_CHAN_INFO_SCALE: + range = hmc5843_get_scale_index(data, val, val2); + if (range < 0) + return -EINVAL; + + return hmc5843_set_range_gain(data, range); + default: + return -EINVAL; + } +} + +static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } +} + +static irqreturn_t hmc5843_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct hmc5843_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->lock); + ret = hmc5843_wait_measurement(data); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + + ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, + data->scan.chans, sizeof(data->scan.chans)); + + mutex_unlock(&data->lock); + if (ret < 0) + goto done; + + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + iio_get_time_ns(indio_dev)); + +done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +#define HMC5843_CHANNEL(axis, idx) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + .ext_info = hmc5843_ext_info, \ + } + +#define HMC5983_CHANNEL(axis, idx) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + .ext_info = hmc5983_ext_info, \ + } + +static const struct iio_chan_spec hmc5843_channels[] = { + HMC5843_CHANNEL(X, 0), + HMC5843_CHANNEL(Y, 1), + HMC5843_CHANNEL(Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +/* Beware: Y and Z are exchanged on HMC5883 and 5983 */ +static const struct iio_chan_spec hmc5883_channels[] = { + HMC5843_CHANNEL(X, 0), + HMC5843_CHANNEL(Z, 1), + HMC5843_CHANNEL(Y, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_chan_spec hmc5983_channels[] = { + HMC5983_CHANNEL(X, 0), + HMC5983_CHANNEL(Z, 1), + HMC5983_CHANNEL(Y, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static struct attribute *hmc5843_attributes[] = { + &iio_dev_attr_scale_available.dev_attr.attr, + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group hmc5843_group = { + .attrs = hmc5843_attributes, +}; + +static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = { + [HMC5843_ID] = { + .channels = hmc5843_channels, + .regval_to_samp_freq = hmc5843_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5843_regval_to_samp_freq), + .regval_to_nanoscale = hmc5843_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5843_regval_to_nanoscale), + }, + [HMC5883_ID] = { + .channels = hmc5883_channels, + .regval_to_samp_freq = hmc5883_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5883_regval_to_samp_freq), + .regval_to_nanoscale = hmc5883_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5883_regval_to_nanoscale), + }, + [HMC5883L_ID] = { + .channels = hmc5883_channels, + .regval_to_samp_freq = hmc5883_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5883_regval_to_samp_freq), + .regval_to_nanoscale = hmc5883l_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5883l_regval_to_nanoscale), + }, + [HMC5983_ID] = { + .channels = hmc5983_channels, + .regval_to_samp_freq = hmc5983_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5983_regval_to_samp_freq), + .regval_to_nanoscale = hmc5883l_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5883l_regval_to_nanoscale), + } +}; + +static int hmc5843_init(struct hmc5843_data *data) +{ + int ret; + u8 id[3]; + + ret = regmap_bulk_read(data->regmap, HMC5843_ID_REG, + id, ARRAY_SIZE(id)); + if (ret < 0) + return ret; + if (id[0] != 'H' || id[1] != '4' || id[2] != '3') { + dev_err(data->dev, "no HMC5843/5883/5883L/5983 sensor\n"); + return -ENODEV; + } + + ret = hmc5843_set_meas_conf(data, HMC5843_MEAS_CONF_NORMAL); + if (ret < 0) + return ret; + ret = hmc5843_set_samp_freq(data, HMC5843_RATE_DEFAULT); + if (ret < 0) + return ret; + ret = hmc5843_set_range_gain(data, HMC5843_RANGE_GAIN_DEFAULT); + if (ret < 0) + return ret; + return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS); +} + +static const struct iio_info hmc5843_info = { + .attrs = &hmc5843_group, + .read_raw = &hmc5843_read_raw, + .write_raw = &hmc5843_write_raw, + .write_raw_get_fmt = &hmc5843_write_raw_get_fmt, +}; + +static const unsigned long hmc5843_scan_masks[] = {0x7, 0}; + +static int hmc5843_common_suspend(struct device *dev) +{ + return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), + HMC5843_MODE_SLEEP); +} + +static int hmc5843_common_resume(struct device *dev) +{ + return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), + HMC5843_MODE_CONVERSION_CONTINUOUS); +} +EXPORT_NS_SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_common_suspend, + hmc5843_common_resume, IIO_HMC5843); + +int hmc5843_common_probe(struct device *dev, struct regmap *regmap, + enum hmc5843_ids id, const char *name) +{ + struct hmc5843_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + dev_set_drvdata(dev, indio_dev); + + /* default settings at probe */ + data = iio_priv(indio_dev); + data->dev = dev; + data->regmap = regmap; + data->variant = &hmc5843_chip_info_tbl[id]; + mutex_init(&data->lock); + + ret = iio_read_mount_matrix(dev, &data->orientation); + if (ret) + return ret; + + indio_dev->name = name; + indio_dev->info = &hmc5843_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = data->variant->channels; + indio_dev->num_channels = 4; + indio_dev->available_scan_masks = hmc5843_scan_masks; + + ret = hmc5843_init(data); + if (ret < 0) + return ret; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + hmc5843_trigger_handler, NULL); + if (ret < 0) + goto buffer_setup_err; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto buffer_cleanup; + + return 0; + +buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +buffer_setup_err: + hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP); + return ret; +} +EXPORT_SYMBOL_NS(hmc5843_common_probe, IIO_HMC5843); + +void hmc5843_common_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + /* sleep mode to save power */ + hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP); +} +EXPORT_SYMBOL_NS(hmc5843_common_remove, IIO_HMC5843); + +MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com>"); +MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 core driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/hmc5843_i2c.c b/drivers/iio/magnetometer/hmc5843_i2c.c new file mode 100644 index 0000000000..bdd2784a9f --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843_i2c.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * i2c driver for hmc5843/5843/5883/5883l/5983 + * + * Split from hmc5843.c + * Copyright (C) Josef Gajdusek <atx@atx.name> + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/triggered_buffer.h> + +#include "hmc5843.h" + +static const struct regmap_range hmc5843_readable_ranges[] = { + regmap_reg_range(0, HMC5843_ID_END), +}; + +static const struct regmap_access_table hmc5843_readable_table = { + .yes_ranges = hmc5843_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), +}; + +static const struct regmap_range hmc5843_writable_ranges[] = { + regmap_reg_range(0, HMC5843_MODE_REG), +}; + +static const struct regmap_access_table hmc5843_writable_table = { + .yes_ranges = hmc5843_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), +}; + +static const struct regmap_range hmc5843_volatile_ranges[] = { + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), +}; + +static const struct regmap_access_table hmc5843_volatile_table = { + .yes_ranges = hmc5843_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), +}; + +static const struct regmap_config hmc5843_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .rd_table = &hmc5843_readable_table, + .wr_table = &hmc5843_writable_table, + .volatile_table = &hmc5843_volatile_table, + + .cache_type = REGCACHE_RBTREE, +}; + +static int hmc5843_i2c_probe(struct i2c_client *cli) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(cli); + struct regmap *regmap = devm_regmap_init_i2c(cli, + &hmc5843_i2c_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return hmc5843_common_probe(&cli->dev, + regmap, + id->driver_data, id->name); +} + +static void hmc5843_i2c_remove(struct i2c_client *client) +{ + hmc5843_common_remove(&client->dev); +} + +static const struct i2c_device_id hmc5843_id[] = { + { "hmc5843", HMC5843_ID }, + { "hmc5883", HMC5883_ID }, + { "hmc5883l", HMC5883L_ID }, + { "hmc5983", HMC5983_ID }, + { } +}; +MODULE_DEVICE_TABLE(i2c, hmc5843_id); + +static const struct of_device_id hmc5843_of_match[] = { + { .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID }, + { .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID }, + { .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID }, + { .compatible = "honeywell,hmc5983", .data = (void *)HMC5983_ID }, + {} +}; +MODULE_DEVICE_TABLE(of, hmc5843_of_match); + +static struct i2c_driver hmc5843_driver = { + .driver = { + .name = "hmc5843", + .pm = pm_sleep_ptr(&hmc5843_pm_ops), + .of_match_table = hmc5843_of_match, + }, + .id_table = hmc5843_id, + .probe = hmc5843_i2c_probe, + .remove = hmc5843_i2c_remove, +}; +module_i2c_driver(hmc5843_driver); + +MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>"); +MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 i2c driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HMC5843); diff --git a/drivers/iio/magnetometer/hmc5843_spi.c b/drivers/iio/magnetometer/hmc5843_spi.c new file mode 100644 index 0000000000..c42d2e2a6a --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843_spi.c @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * SPI driver for hmc5983 + * + * Copyright (C) Josef Gajdusek <atx@atx.name> + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/iio/iio.h> + +#include "hmc5843.h" + +static const struct regmap_range hmc5843_readable_ranges[] = { + regmap_reg_range(0, HMC5843_ID_END), +}; + +static const struct regmap_access_table hmc5843_readable_table = { + .yes_ranges = hmc5843_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), +}; + +static const struct regmap_range hmc5843_writable_ranges[] = { + regmap_reg_range(0, HMC5843_MODE_REG), +}; + +static const struct regmap_access_table hmc5843_writable_table = { + .yes_ranges = hmc5843_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), +}; + +static const struct regmap_range hmc5843_volatile_ranges[] = { + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), +}; + +static const struct regmap_access_table hmc5843_volatile_table = { + .yes_ranges = hmc5843_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), +}; + +static const struct regmap_config hmc5843_spi_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .rd_table = &hmc5843_readable_table, + .wr_table = &hmc5843_writable_table, + .volatile_table = &hmc5843_volatile_table, + + /* Autoincrement address pointer */ + .read_flag_mask = 0xc0, + + .cache_type = REGCACHE_RBTREE, +}; + +static int hmc5843_spi_probe(struct spi_device *spi) +{ + int ret; + struct regmap *regmap; + const struct spi_device_id *id = spi_get_device_id(spi); + + spi->mode = SPI_MODE_3; + spi->max_speed_hz = 8000000; + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret) + return ret; + + regmap = devm_regmap_init_spi(spi, &hmc5843_spi_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return hmc5843_common_probe(&spi->dev, + regmap, + id->driver_data, id->name); +} + +static void hmc5843_spi_remove(struct spi_device *spi) +{ + hmc5843_common_remove(&spi->dev); +} + +static const struct spi_device_id hmc5843_id[] = { + { "hmc5983", HMC5983_ID }, + { } +}; +MODULE_DEVICE_TABLE(spi, hmc5843_id); + +static struct spi_driver hmc5843_driver = { + .driver = { + .name = "hmc5843", + .pm = pm_sleep_ptr(&hmc5843_pm_ops), + }, + .id_table = hmc5843_id, + .probe = hmc5843_spi_probe, + .remove = hmc5843_spi_remove, +}; + +module_spi_driver(hmc5843_driver); + +MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>"); +MODULE_DESCRIPTION("HMC5983 SPI driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HMC5843); diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c new file mode 100644 index 0000000000..deffe3ca90 --- /dev/null +++ b/drivers/iio/magnetometer/mag3110.c @@ -0,0 +1,652 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * mag3110.c - Support for Freescale MAG3110 magnetometer sensor + * + * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net> + * + * (7-bit I2C slave address 0x0e) + * + * TODO: irq, user offset, oversampling, continuous mode + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/delay.h> +#include <linux/regulator/consumer.h> + +#define MAG3110_STATUS 0x00 +#define MAG3110_OUT_X 0x01 /* MSB first */ +#define MAG3110_OUT_Y 0x03 +#define MAG3110_OUT_Z 0x05 +#define MAG3110_WHO_AM_I 0x07 +#define MAG3110_SYSMOD 0x08 +#define MAG3110_OFF_X 0x09 /* MSB first */ +#define MAG3110_OFF_Y 0x0b +#define MAG3110_OFF_Z 0x0d +#define MAG3110_DIE_TEMP 0x0f +#define MAG3110_CTRL_REG1 0x10 +#define MAG3110_CTRL_REG2 0x11 + +#define MAG3110_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0)) + +#define MAG3110_CTRL_DR_MASK (BIT(7) | BIT(6) | BIT(5)) +#define MAG3110_CTRL_DR_SHIFT 5 +#define MAG3110_CTRL_DR_DEFAULT 0 + +#define MAG3110_SYSMOD_MODE_MASK GENMASK(1, 0) + +#define MAG3110_CTRL_TM BIT(1) /* trigger single measurement */ +#define MAG3110_CTRL_AC BIT(0) /* continuous measurements */ + +#define MAG3110_CTRL_AUTO_MRST_EN BIT(7) /* magnetic auto-reset */ +#define MAG3110_CTRL_RAW BIT(5) /* measurements not user-offset corrected */ + +#define MAG3110_DEVICE_ID 0xc4 + +/* Each client has this additional data */ +struct mag3110_data { + struct i2c_client *client; + struct mutex lock; + u8 ctrl_reg1; + int sleep_val; + struct regulator *vdd_reg; + struct regulator *vddio_reg; + /* Ensure natural alignment of timestamp */ + struct { + __be16 channels[3]; + u8 temperature; + s64 ts __aligned(8); + } scan; +}; + +static int mag3110_request(struct mag3110_data *data) +{ + int ret, tries = 150; + + if ((data->ctrl_reg1 & MAG3110_CTRL_AC) == 0) { + /* trigger measurement */ + ret = i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1, + data->ctrl_reg1 | MAG3110_CTRL_TM); + if (ret < 0) + return ret; + } + + while (tries-- > 0) { + ret = i2c_smbus_read_byte_data(data->client, MAG3110_STATUS); + if (ret < 0) + return ret; + /* wait for data ready */ + if ((ret & MAG3110_STATUS_DRDY) == MAG3110_STATUS_DRDY) + break; + + if (data->sleep_val <= 20) + usleep_range(data->sleep_val * 250, data->sleep_val * 500); + else + msleep(20); + } + + if (tries < 0) { + dev_err(&data->client->dev, "data not ready\n"); + return -EIO; + } + + return 0; +} + +static int mag3110_read(struct mag3110_data *data, __be16 buf[3]) +{ + int ret; + + mutex_lock(&data->lock); + ret = mag3110_request(data); + if (ret < 0) { + mutex_unlock(&data->lock); + return ret; + } + ret = i2c_smbus_read_i2c_block_data(data->client, + MAG3110_OUT_X, 3 * sizeof(__be16), (u8 *) buf); + mutex_unlock(&data->lock); + + return ret; +} + +static ssize_t mag3110_show_int_plus_micros(char *buf, + const int (*vals)[2], int n) +{ + size_t len = 0; + + while (n-- > 0) + len += scnprintf(buf + len, PAGE_SIZE - len, + "%d.%06d ", vals[n][0], vals[n][1]); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static int mag3110_get_int_plus_micros_index(const int (*vals)[2], int n, + int val, int val2) +{ + while (n-- > 0) + if (val == vals[n][0] && val2 == vals[n][1]) + return n; + + return -EINVAL; +} + +static const int mag3110_samp_freq[8][2] = { + {80, 0}, {40, 0}, {20, 0}, {10, 0}, {5, 0}, {2, 500000}, + {1, 250000}, {0, 625000} +}; + +static ssize_t mag3110_show_samp_freq_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return mag3110_show_int_plus_micros(buf, mag3110_samp_freq, 8); +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mag3110_show_samp_freq_avail); + +static int mag3110_get_samp_freq_index(struct mag3110_data *data, + int val, int val2) +{ + return mag3110_get_int_plus_micros_index(mag3110_samp_freq, 8, val, + val2); +} + +static int mag3110_calculate_sleep(struct mag3110_data *data) +{ + int ret, i = data->ctrl_reg1 >> MAG3110_CTRL_DR_SHIFT; + + if (mag3110_samp_freq[i][0] > 0) + ret = 1000 / mag3110_samp_freq[i][0]; + else + ret = 1000; + + return ret == 0 ? 1 : ret; +} + +static int mag3110_standby(struct mag3110_data *data) +{ + return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1, + data->ctrl_reg1 & ~MAG3110_CTRL_AC); +} + +static int mag3110_wait_standby(struct mag3110_data *data) +{ + int ret, tries = 30; + + /* + * Takes up to 1/ODR to come out of active mode into stby + * Longest expected period is 12.5seconds. + * We'll sleep for 500ms between checks + */ + while (tries-- > 0) { + ret = i2c_smbus_read_byte_data(data->client, MAG3110_SYSMOD); + if (ret < 0) { + dev_err(&data->client->dev, "i2c error\n"); + return ret; + } + /* wait for standby */ + if ((ret & MAG3110_SYSMOD_MODE_MASK) == 0) + break; + + msleep_interruptible(500); + } + + if (tries < 0) { + dev_err(&data->client->dev, "device not entering standby mode\n"); + return -EIO; + } + + return 0; +} + +static int mag3110_active(struct mag3110_data *data) +{ + return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1, + data->ctrl_reg1); +} + +/* returns >0 if active, 0 if in standby and <0 on error */ +static int mag3110_is_active(struct mag3110_data *data) +{ + int reg; + + reg = i2c_smbus_read_byte_data(data->client, MAG3110_CTRL_REG1); + if (reg < 0) + return reg; + + return reg & MAG3110_CTRL_AC; +} + +static int mag3110_change_config(struct mag3110_data *data, u8 reg, u8 val) +{ + int ret; + int is_active; + + mutex_lock(&data->lock); + + is_active = mag3110_is_active(data); + if (is_active < 0) { + ret = is_active; + goto fail; + } + + /* config can only be changed when in standby */ + if (is_active > 0) { + ret = mag3110_standby(data); + if (ret < 0) + goto fail; + } + + /* + * After coming out of active we must wait for the part + * to transition to STBY. This can take up to 1 /ODR to occur + */ + ret = mag3110_wait_standby(data); + if (ret < 0) + goto fail; + + ret = i2c_smbus_write_byte_data(data->client, reg, val); + if (ret < 0) + goto fail; + + if (is_active > 0) { + ret = mag3110_active(data); + if (ret < 0) + goto fail; + } + + ret = 0; +fail: + mutex_unlock(&data->lock); + + return ret; +} + +static int mag3110_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mag3110_data *data = iio_priv(indio_dev); + __be16 buffer[3]; + int i, ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch (chan->type) { + case IIO_MAGN: /* in 0.1 uT / LSB */ + ret = mag3110_read(data, buffer); + if (ret < 0) + goto release; + *val = sign_extend32( + be16_to_cpu(buffer[chan->scan_index]), + chan->scan_type.realbits - 1); + ret = IIO_VAL_INT; + break; + case IIO_TEMP: /* in 1 C / LSB */ + mutex_lock(&data->lock); + ret = mag3110_request(data); + if (ret < 0) { + mutex_unlock(&data->lock); + goto release; + } + ret = i2c_smbus_read_byte_data(data->client, + MAG3110_DIE_TEMP); + mutex_unlock(&data->lock); + if (ret < 0) + goto release; + *val = sign_extend32(ret, + chan->scan_type.realbits - 1); + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + } +release: + iio_device_release_direct_mode(indio_dev); + return ret; + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_MAGN: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 1000; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + i = data->ctrl_reg1 >> MAG3110_CTRL_DR_SHIFT; + *val = mag3110_samp_freq[i][0]; + *val2 = mag3110_samp_freq[i][1]; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_CALIBBIAS: + ret = i2c_smbus_read_word_swapped(data->client, + MAG3110_OFF_X + 2 * chan->scan_index); + if (ret < 0) + return ret; + *val = sign_extend32(ret >> 1, 14); + return IIO_VAL_INT; + } + return -EINVAL; +} + +static int mag3110_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct mag3110_data *data = iio_priv(indio_dev); + int rate, ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + rate = mag3110_get_samp_freq_index(data, val, val2); + if (rate < 0) { + ret = -EINVAL; + break; + } + data->ctrl_reg1 &= 0xff & ~MAG3110_CTRL_DR_MASK + & ~MAG3110_CTRL_AC; + data->ctrl_reg1 |= rate << MAG3110_CTRL_DR_SHIFT; + data->sleep_val = mag3110_calculate_sleep(data); + if (data->sleep_val < 40) + data->ctrl_reg1 |= MAG3110_CTRL_AC; + + ret = mag3110_change_config(data, MAG3110_CTRL_REG1, + data->ctrl_reg1); + break; + case IIO_CHAN_INFO_CALIBBIAS: + if (val < -10000 || val > 10000) { + ret = -EINVAL; + break; + } + ret = i2c_smbus_write_word_swapped(data->client, + MAG3110_OFF_X + 2 * chan->scan_index, val << 1); + break; + default: + ret = -EINVAL; + break; + } + iio_device_release_direct_mode(indio_dev); + return ret; +} + +static irqreturn_t mag3110_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct mag3110_data *data = iio_priv(indio_dev); + int ret; + + ret = mag3110_read(data, data->scan.channels); + if (ret < 0) + goto done; + + if (test_bit(3, indio_dev->active_scan_mask)) { + ret = i2c_smbus_read_byte_data(data->client, + MAG3110_DIE_TEMP); + if (ret < 0) + goto done; + data->scan.temperature = ret; + } + + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + iio_get_time_ns(indio_dev)); + +done: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +#define MAG3110_CHANNEL(axis, idx) { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_CALIBBIAS), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +static const struct iio_chan_spec mag3110_channels[] = { + MAG3110_CHANNEL(X, 0), + MAG3110_CHANNEL(Y, 1), + MAG3110_CHANNEL(Z, 2), + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 3, + .scan_type = { + .sign = 's', + .realbits = 8, + .storagebits = 8, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static struct attribute *mag3110_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group mag3110_group = { + .attrs = mag3110_attributes, +}; + +static const struct iio_info mag3110_info = { + .attrs = &mag3110_group, + .read_raw = &mag3110_read_raw, + .write_raw = &mag3110_write_raw, +}; + +static const unsigned long mag3110_scan_masks[] = {0x7, 0xf, 0}; + +static int mag3110_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + struct mag3110_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + + data->vdd_reg = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(data->vdd_reg)) + return dev_err_probe(&client->dev, PTR_ERR(data->vdd_reg), + "failed to get VDD regulator!\n"); + + data->vddio_reg = devm_regulator_get(&client->dev, "vddio"); + if (IS_ERR(data->vddio_reg)) + return dev_err_probe(&client->dev, PTR_ERR(data->vddio_reg), + "failed to get VDDIO regulator!\n"); + + ret = regulator_enable(data->vdd_reg); + if (ret) { + dev_err(&client->dev, "failed to enable VDD regulator!\n"); + return ret; + } + + ret = regulator_enable(data->vddio_reg); + if (ret) { + dev_err(&client->dev, "failed to enable VDDIO regulator!\n"); + goto disable_regulator_vdd; + } + + ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I); + if (ret < 0) + goto disable_regulators; + if (ret != MAG3110_DEVICE_ID) { + ret = -ENODEV; + goto disable_regulators; + } + + data->client = client; + mutex_init(&data->lock); + + i2c_set_clientdata(client, indio_dev); + indio_dev->info = &mag3110_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mag3110_channels; + indio_dev->num_channels = ARRAY_SIZE(mag3110_channels); + indio_dev->available_scan_masks = mag3110_scan_masks; + + data->ctrl_reg1 = MAG3110_CTRL_DR_DEFAULT << MAG3110_CTRL_DR_SHIFT; + data->sleep_val = mag3110_calculate_sleep(data); + if (data->sleep_val < 40) + data->ctrl_reg1 |= MAG3110_CTRL_AC; + + ret = mag3110_change_config(data, MAG3110_CTRL_REG1, data->ctrl_reg1); + if (ret < 0) + goto disable_regulators; + + ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2, + MAG3110_CTRL_AUTO_MRST_EN); + if (ret < 0) + goto standby_on_error; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + mag3110_trigger_handler, NULL); + if (ret < 0) + goto standby_on_error; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto buffer_cleanup; + return 0; + +buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +standby_on_error: + mag3110_standby(iio_priv(indio_dev)); +disable_regulators: + regulator_disable(data->vddio_reg); +disable_regulator_vdd: + regulator_disable(data->vdd_reg); + + return ret; +} + +static void mag3110_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct mag3110_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + mag3110_standby(iio_priv(indio_dev)); + regulator_disable(data->vddio_reg); + regulator_disable(data->vdd_reg); +} + +static int mag3110_suspend(struct device *dev) +{ + struct mag3110_data *data = iio_priv(i2c_get_clientdata( + to_i2c_client(dev))); + int ret; + + ret = mag3110_standby(iio_priv(i2c_get_clientdata( + to_i2c_client(dev)))); + if (ret) + return ret; + + ret = regulator_disable(data->vddio_reg); + if (ret) { + dev_err(dev, "failed to disable VDDIO regulator\n"); + return ret; + } + + ret = regulator_disable(data->vdd_reg); + if (ret) { + dev_err(dev, "failed to disable VDD regulator\n"); + return ret; + } + + return 0; +} + +static int mag3110_resume(struct device *dev) +{ + struct mag3110_data *data = iio_priv(i2c_get_clientdata( + to_i2c_client(dev))); + int ret; + + ret = regulator_enable(data->vdd_reg); + if (ret) { + dev_err(dev, "failed to enable VDD regulator\n"); + return ret; + } + + ret = regulator_enable(data->vddio_reg); + if (ret) { + dev_err(dev, "failed to enable VDDIO regulator\n"); + regulator_disable(data->vdd_reg); + return ret; + } + + return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1, + data->ctrl_reg1); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(mag3110_pm_ops, mag3110_suspend, + mag3110_resume); + +static const struct i2c_device_id mag3110_id[] = { + { "mag3110", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mag3110_id); + +static const struct of_device_id mag3110_of_match[] = { + { .compatible = "fsl,mag3110" }, + { } +}; +MODULE_DEVICE_TABLE(of, mag3110_of_match); + +static struct i2c_driver mag3110_driver = { + .driver = { + .name = "mag3110", + .of_match_table = mag3110_of_match, + .pm = pm_sleep_ptr(&mag3110_pm_ops), + }, + .probe = mag3110_probe, + .remove = mag3110_remove, + .id_table = mag3110_id, +}; +module_i2c_driver(mag3110_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("Freescale MAG3110 magnetometer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c new file mode 100644 index 0000000000..b495b8a639 --- /dev/null +++ b/drivers/iio/magnetometer/mmc35240.c @@ -0,0 +1,586 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MMC35240 - MEMSIC 3-axis Magnetic Sensor + * + * Copyright (c) 2015, Intel Corporation. + * + * IIO driver for MMC35240 (7-bit I2C slave address 0x30). + * + * TODO: offset, ACPI, continuous measurement mode, PM + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/regmap.h> +#include <linux/acpi.h> +#include <linux/pm.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define MMC35240_DRV_NAME "mmc35240" +#define MMC35240_REGMAP_NAME "mmc35240_regmap" + +#define MMC35240_REG_XOUT_L 0x00 +#define MMC35240_REG_XOUT_H 0x01 +#define MMC35240_REG_YOUT_L 0x02 +#define MMC35240_REG_YOUT_H 0x03 +#define MMC35240_REG_ZOUT_L 0x04 +#define MMC35240_REG_ZOUT_H 0x05 + +#define MMC35240_REG_STATUS 0x06 +#define MMC35240_REG_CTRL0 0x07 +#define MMC35240_REG_CTRL1 0x08 + +#define MMC35240_REG_ID 0x20 + +#define MMC35240_STATUS_MEAS_DONE_BIT BIT(0) + +#define MMC35240_CTRL0_REFILL_BIT BIT(7) +#define MMC35240_CTRL0_RESET_BIT BIT(6) +#define MMC35240_CTRL0_SET_BIT BIT(5) +#define MMC35240_CTRL0_CMM_BIT BIT(1) +#define MMC35240_CTRL0_TM_BIT BIT(0) + +/* output resolution bits */ +#define MMC35240_CTRL1_BW0_BIT BIT(0) +#define MMC35240_CTRL1_BW1_BIT BIT(1) + +#define MMC35240_CTRL1_BW_MASK (MMC35240_CTRL1_BW0_BIT | \ + MMC35240_CTRL1_BW1_BIT) +#define MMC35240_CTRL1_BW_SHIFT 0 + +#define MMC35240_WAIT_CHARGE_PUMP 50000 /* us */ +#define MMC35240_WAIT_SET_RESET 1000 /* us */ + +/* + * Memsic OTP process code piece is put here for reference: + * + * #define OTP_CONVERT(REG) ((float)((REG) >=32 ? (32 - (REG)) : (REG)) * 0.006 + * 1) For X axis, the COEFFICIENT is always 1. + * 2) For Y axis, the COEFFICIENT is as below: + * f_OTP_matrix[4] = OTP_CONVERT(((reg_data[1] & 0x03) << 4) | + * (reg_data[2] >> 4)) + 1.0; + * 3) For Z axis, the COEFFICIENT is as below: + * f_OTP_matrix[8] = (OTP_CONVERT(reg_data[3] & 0x3f) + 1) * 1.35; + * We implemented the OTP logic into driver. + */ + +/* scale = 1000 here for Y otp */ +#define MMC35240_OTP_CONVERT_Y(REG) (((REG) >= 32 ? (32 - (REG)) : (REG)) * 6) + +/* 0.6 * 1.35 = 0.81, scale 10000 for Z otp */ +#define MMC35240_OTP_CONVERT_Z(REG) (((REG) >= 32 ? (32 - (REG)) : (REG)) * 81) + +#define MMC35240_X_COEFF(x) (x) +#define MMC35240_Y_COEFF(y) (y + 1000) +#define MMC35240_Z_COEFF(z) (z + 13500) + +#define MMC35240_OTP_START_ADDR 0x1B + +enum mmc35240_resolution { + MMC35240_16_BITS_SLOW = 0, /* 7.92 ms */ + MMC35240_16_BITS_FAST, /* 4.08 ms */ + MMC35240_14_BITS, /* 2.16 ms */ + MMC35240_12_BITS, /* 1.20 ms */ +}; + +enum mmc35240_axis { + AXIS_X = 0, + AXIS_Y, + AXIS_Z, +}; + +static const struct { + int sens[3]; /* sensitivity per X, Y, Z axis */ + int nfo; /* null field output */ +} mmc35240_props_table[] = { + /* 16 bits, 125Hz ODR */ + { + {1024, 1024, 1024}, + 32768, + }, + /* 16 bits, 250Hz ODR */ + { + {1024, 1024, 770}, + 32768, + }, + /* 14 bits, 450Hz ODR */ + { + {256, 256, 193}, + 8192, + }, + /* 12 bits, 800Hz ODR */ + { + {64, 64, 48}, + 2048, + }, +}; + +struct mmc35240_data { + struct i2c_client *client; + struct mutex mutex; + struct regmap *regmap; + enum mmc35240_resolution res; + + /* OTP compensation */ + int axis_coef[3]; + int axis_scale[3]; +}; + +static const struct { + int val; + int val2; +} mmc35240_samp_freq[] = { {1, 500000}, + {13, 0}, + {25, 0}, + {50, 0} }; + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1.5 13 25 50"); + +#define MMC35240_CHANNEL(_axis) { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _axis, \ + .address = AXIS_ ## _axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec mmc35240_channels[] = { + MMC35240_CHANNEL(X), + MMC35240_CHANNEL(Y), + MMC35240_CHANNEL(Z), +}; + +static struct attribute *mmc35240_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group mmc35240_attribute_group = { + .attrs = mmc35240_attributes, +}; + +static int mmc35240_get_samp_freq_index(struct mmc35240_data *data, + int val, int val2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mmc35240_samp_freq); i++) + if (mmc35240_samp_freq[i].val == val && + mmc35240_samp_freq[i].val2 == val2) + return i; + return -EINVAL; +} + +static int mmc35240_hw_set(struct mmc35240_data *data, bool set) +{ + int ret; + u8 coil_bit; + + /* + * Recharge the capacitor at VCAP pin, requested to be issued + * before a SET/RESET command. + */ + ret = regmap_update_bits(data->regmap, MMC35240_REG_CTRL0, + MMC35240_CTRL0_REFILL_BIT, + MMC35240_CTRL0_REFILL_BIT); + if (ret < 0) + return ret; + usleep_range(MMC35240_WAIT_CHARGE_PUMP, MMC35240_WAIT_CHARGE_PUMP + 1); + + if (set) + coil_bit = MMC35240_CTRL0_SET_BIT; + else + coil_bit = MMC35240_CTRL0_RESET_BIT; + + return regmap_update_bits(data->regmap, MMC35240_REG_CTRL0, + coil_bit, coil_bit); + +} + +static int mmc35240_init(struct mmc35240_data *data) +{ + int ret, y_convert, z_convert; + unsigned int reg_id; + u8 otp_data[6]; + + ret = regmap_read(data->regmap, MMC35240_REG_ID, ®_id); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading product id\n"); + return ret; + } + + dev_dbg(&data->client->dev, "MMC35240 chip id %x\n", reg_id); + + /* + * make sure we restore sensor characteristics, by doing + * a SET/RESET sequence, the axis polarity being naturally + * aligned after RESET + */ + ret = mmc35240_hw_set(data, true); + if (ret < 0) + return ret; + usleep_range(MMC35240_WAIT_SET_RESET, MMC35240_WAIT_SET_RESET + 1); + + ret = mmc35240_hw_set(data, false); + if (ret < 0) + return ret; + + /* set default sampling frequency */ + ret = regmap_update_bits(data->regmap, MMC35240_REG_CTRL1, + MMC35240_CTRL1_BW_MASK, + data->res << MMC35240_CTRL1_BW_SHIFT); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, MMC35240_OTP_START_ADDR, + otp_data, sizeof(otp_data)); + if (ret < 0) + return ret; + + y_convert = MMC35240_OTP_CONVERT_Y(((otp_data[1] & 0x03) << 4) | + (otp_data[2] >> 4)); + z_convert = MMC35240_OTP_CONVERT_Z(otp_data[3] & 0x3f); + + data->axis_coef[0] = MMC35240_X_COEFF(1); + data->axis_coef[1] = MMC35240_Y_COEFF(y_convert); + data->axis_coef[2] = MMC35240_Z_COEFF(z_convert); + + data->axis_scale[0] = 1; + data->axis_scale[1] = 1000; + data->axis_scale[2] = 10000; + + return 0; +} + +static int mmc35240_take_measurement(struct mmc35240_data *data) +{ + int ret, tries = 100; + unsigned int reg_status; + + ret = regmap_write(data->regmap, MMC35240_REG_CTRL0, + MMC35240_CTRL0_TM_BIT); + if (ret < 0) + return ret; + + while (tries-- > 0) { + ret = regmap_read(data->regmap, MMC35240_REG_STATUS, + ®_status); + if (ret < 0) + return ret; + if (reg_status & MMC35240_STATUS_MEAS_DONE_BIT) + break; + /* minimum wait time to complete measurement is 10 ms */ + usleep_range(10000, 11000); + } + + if (tries < 0) { + dev_err(&data->client->dev, "data not ready\n"); + return -EIO; + } + + return 0; +} + +static int mmc35240_read_measurement(struct mmc35240_data *data, __le16 buf[3]) +{ + int ret; + + ret = mmc35240_take_measurement(data); + if (ret < 0) + return ret; + + return regmap_bulk_read(data->regmap, MMC35240_REG_XOUT_L, buf, + 3 * sizeof(__le16)); +} + +/** + * mmc35240_raw_to_mgauss - convert raw readings to milli gauss. Also apply + * compensation for output value. + * + * @data: device private data + * @index: axis index for which we want the conversion + * @buf: raw data to be converted, 2 bytes in little endian format + * @val: compensated output reading (unit is milli gauss) + * + * Returns: 0 in case of success, -EINVAL when @index is not valid + */ +static int mmc35240_raw_to_mgauss(struct mmc35240_data *data, int index, + __le16 buf[], int *val) +{ + int raw[3]; + int sens[3]; + int nfo; + + raw[AXIS_X] = le16_to_cpu(buf[AXIS_X]); + raw[AXIS_Y] = le16_to_cpu(buf[AXIS_Y]); + raw[AXIS_Z] = le16_to_cpu(buf[AXIS_Z]); + + sens[AXIS_X] = mmc35240_props_table[data->res].sens[AXIS_X]; + sens[AXIS_Y] = mmc35240_props_table[data->res].sens[AXIS_Y]; + sens[AXIS_Z] = mmc35240_props_table[data->res].sens[AXIS_Z]; + + nfo = mmc35240_props_table[data->res].nfo; + + switch (index) { + case AXIS_X: + *val = (raw[AXIS_X] - nfo) * 1000 / sens[AXIS_X]; + break; + case AXIS_Y: + *val = (raw[AXIS_Y] - nfo) * 1000 / sens[AXIS_Y] - + (raw[AXIS_Z] - nfo) * 1000 / sens[AXIS_Z]; + break; + case AXIS_Z: + *val = (raw[AXIS_Y] - nfo) * 1000 / sens[AXIS_Y] + + (raw[AXIS_Z] - nfo) * 1000 / sens[AXIS_Z]; + break; + default: + return -EINVAL; + } + /* apply OTP compensation */ + *val = (*val) * data->axis_coef[index] / data->axis_scale[index]; + + return 0; +} + +static int mmc35240_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct mmc35240_data *data = iio_priv(indio_dev); + int ret, i; + unsigned int reg; + __le16 buf[3]; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->mutex); + ret = mmc35240_read_measurement(data, buf); + mutex_unlock(&data->mutex); + if (ret < 0) + return ret; + ret = mmc35240_raw_to_mgauss(data, chan->address, buf, val); + if (ret < 0) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = regmap_read(data->regmap, MMC35240_REG_CTRL1, ®); + mutex_unlock(&data->mutex); + if (ret < 0) + return ret; + + i = (reg & MMC35240_CTRL1_BW_MASK) >> MMC35240_CTRL1_BW_SHIFT; + if (i < 0 || i >= ARRAY_SIZE(mmc35240_samp_freq)) + return -EINVAL; + + *val = mmc35240_samp_freq[i].val; + *val2 = mmc35240_samp_freq[i].val2; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int mmc35240_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct mmc35240_data *data = iio_priv(indio_dev); + int i, ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + i = mmc35240_get_samp_freq_index(data, val, val2); + if (i < 0) + return -EINVAL; + mutex_lock(&data->mutex); + ret = regmap_update_bits(data->regmap, MMC35240_REG_CTRL1, + MMC35240_CTRL1_BW_MASK, + i << MMC35240_CTRL1_BW_SHIFT); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } +} + +static const struct iio_info mmc35240_info = { + .read_raw = mmc35240_read_raw, + .write_raw = mmc35240_write_raw, + .attrs = &mmc35240_attribute_group, +}; + +static bool mmc35240_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MMC35240_REG_CTRL0: + case MMC35240_REG_CTRL1: + return true; + default: + return false; + } +} + +static bool mmc35240_is_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MMC35240_REG_XOUT_L: + case MMC35240_REG_XOUT_H: + case MMC35240_REG_YOUT_L: + case MMC35240_REG_YOUT_H: + case MMC35240_REG_ZOUT_L: + case MMC35240_REG_ZOUT_H: + case MMC35240_REG_STATUS: + case MMC35240_REG_ID: + return true; + default: + return false; + } +} + +static bool mmc35240_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MMC35240_REG_CTRL0: + case MMC35240_REG_CTRL1: + return false; + default: + return true; + } +} + +static const struct reg_default mmc35240_reg_defaults[] = { + { MMC35240_REG_CTRL0, 0x00 }, + { MMC35240_REG_CTRL1, 0x00 }, +}; + +static const struct regmap_config mmc35240_regmap_config = { + .name = MMC35240_REGMAP_NAME, + + .reg_bits = 8, + .val_bits = 8, + + .max_register = MMC35240_REG_ID, + .cache_type = REGCACHE_FLAT, + + .writeable_reg = mmc35240_is_writeable_reg, + .readable_reg = mmc35240_is_readable_reg, + .volatile_reg = mmc35240_is_volatile_reg, + + .reg_defaults = mmc35240_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(mmc35240_reg_defaults), +}; + +static int mmc35240_probe(struct i2c_client *client) +{ + struct mmc35240_data *data; + struct iio_dev *indio_dev; + struct regmap *regmap; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + regmap = devm_regmap_init_i2c(client, &mmc35240_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "regmap initialization failed\n"); + return PTR_ERR(regmap); + } + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + data->regmap = regmap; + data->res = MMC35240_16_BITS_SLOW; + + mutex_init(&data->mutex); + + indio_dev->info = &mmc35240_info; + indio_dev->name = MMC35240_DRV_NAME; + indio_dev->channels = mmc35240_channels; + indio_dev->num_channels = ARRAY_SIZE(mmc35240_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = mmc35240_init(data); + if (ret < 0) { + dev_err(&client->dev, "mmc35240 chip init failed\n"); + return ret; + } + return devm_iio_device_register(&client->dev, indio_dev); +} + +static int mmc35240_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct mmc35240_data *data = iio_priv(indio_dev); + + regcache_cache_only(data->regmap, true); + + return 0; +} + +static int mmc35240_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct mmc35240_data *data = iio_priv(indio_dev); + int ret; + + regcache_mark_dirty(data->regmap); + ret = regcache_sync_region(data->regmap, MMC35240_REG_CTRL0, + MMC35240_REG_CTRL1); + if (ret < 0) + dev_err(dev, "Failed to restore control registers\n"); + + regcache_cache_only(data->regmap, false); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(mmc35240_pm_ops, mmc35240_suspend, + mmc35240_resume); + +static const struct of_device_id mmc35240_of_match[] = { + { .compatible = "memsic,mmc35240", }, + { } +}; +MODULE_DEVICE_TABLE(of, mmc35240_of_match); + +static const struct acpi_device_id mmc35240_acpi_match[] = { + {"MMC35240", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, mmc35240_acpi_match); + +static const struct i2c_device_id mmc35240_id[] = { + {"mmc35240", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mmc35240_id); + +static struct i2c_driver mmc35240_driver = { + .driver = { + .name = MMC35240_DRV_NAME, + .of_match_table = mmc35240_of_match, + .pm = pm_sleep_ptr(&mmc35240_pm_ops), + .acpi_match_table = ACPI_PTR(mmc35240_acpi_match), + }, + .probe = mmc35240_probe, + .id_table = mmc35240_id, +}; + +module_i2c_driver(mmc35240_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); +MODULE_DESCRIPTION("MEMSIC MMC35240 magnetic sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/magnetometer/rm3100-core.c b/drivers/iio/magnetometer/rm3100-core.c new file mode 100644 index 0000000000..6993820445 --- /dev/null +++ b/drivers/iio/magnetometer/rm3100-core.c @@ -0,0 +1,605 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PNI RM3100 3-axis geomagnetic sensor driver core. + * + * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com> + * + * User Manual available at + * <https://www.pnicorp.com/download/rm3100-user-manual/> + * + * TODO: event generation, pm. + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#include <asm/unaligned.h> + +#include "rm3100.h" + +/* Cycle Count Registers. */ +#define RM3100_REG_CC_X 0x05 +#define RM3100_REG_CC_Y 0x07 +#define RM3100_REG_CC_Z 0x09 + +/* Poll Measurement Mode register. */ +#define RM3100_REG_POLL 0x00 +#define RM3100_POLL_X BIT(4) +#define RM3100_POLL_Y BIT(5) +#define RM3100_POLL_Z BIT(6) + +/* Continuous Measurement Mode register. */ +#define RM3100_REG_CMM 0x01 +#define RM3100_CMM_START BIT(0) +#define RM3100_CMM_X BIT(4) +#define RM3100_CMM_Y BIT(5) +#define RM3100_CMM_Z BIT(6) + +/* TiMe Rate Configuration register. */ +#define RM3100_REG_TMRC 0x0B +#define RM3100_TMRC_OFFSET 0x92 + +/* Result Status register. */ +#define RM3100_REG_STATUS 0x34 +#define RM3100_STATUS_DRDY BIT(7) + +/* Measurement result registers. */ +#define RM3100_REG_MX2 0x24 +#define RM3100_REG_MY2 0x27 +#define RM3100_REG_MZ2 0x2a + +#define RM3100_W_REG_START RM3100_REG_POLL +#define RM3100_W_REG_END RM3100_REG_TMRC +#define RM3100_R_REG_START RM3100_REG_POLL +#define RM3100_R_REG_END RM3100_REG_STATUS +#define RM3100_V_REG_START RM3100_REG_POLL +#define RM3100_V_REG_END RM3100_REG_STATUS + +/* + * This is computed by hand, is the sum of channel storage bits and padding + * bits, which is 4+4+4+12=24 in here. + */ +#define RM3100_SCAN_BYTES 24 + +#define RM3100_CMM_AXIS_SHIFT 4 + +struct rm3100_data { + struct regmap *regmap; + struct completion measuring_done; + bool use_interrupt; + int conversion_time; + int scale; + /* Ensure naturally aligned timestamp */ + u8 buffer[RM3100_SCAN_BYTES] __aligned(8); + struct iio_trigger *drdy_trig; + + /* + * This lock is for protecting the consistency of series of i2c + * operations, that is, to make sure a measurement process will + * not be interrupted by a set frequency operation, which should + * be taken where a series of i2c operation starts, released where + * the operation ends. + */ + struct mutex lock; +}; + +static const struct regmap_range rm3100_readable_ranges[] = { + regmap_reg_range(RM3100_R_REG_START, RM3100_R_REG_END), +}; + +const struct regmap_access_table rm3100_readable_table = { + .yes_ranges = rm3100_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(rm3100_readable_ranges), +}; +EXPORT_SYMBOL_NS_GPL(rm3100_readable_table, IIO_RM3100); + +static const struct regmap_range rm3100_writable_ranges[] = { + regmap_reg_range(RM3100_W_REG_START, RM3100_W_REG_END), +}; + +const struct regmap_access_table rm3100_writable_table = { + .yes_ranges = rm3100_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(rm3100_writable_ranges), +}; +EXPORT_SYMBOL_NS_GPL(rm3100_writable_table, IIO_RM3100); + +static const struct regmap_range rm3100_volatile_ranges[] = { + regmap_reg_range(RM3100_V_REG_START, RM3100_V_REG_END), +}; + +const struct regmap_access_table rm3100_volatile_table = { + .yes_ranges = rm3100_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(rm3100_volatile_ranges), +}; +EXPORT_SYMBOL_NS_GPL(rm3100_volatile_table, IIO_RM3100); + +static irqreturn_t rm3100_thread_fn(int irq, void *d) +{ + struct iio_dev *indio_dev = d; + struct rm3100_data *data = iio_priv(indio_dev); + + /* + * Write operation to any register or read operation + * to first byte of results will clear the interrupt. + */ + regmap_write(data->regmap, RM3100_REG_POLL, 0); + + return IRQ_HANDLED; +} + +static irqreturn_t rm3100_irq_handler(int irq, void *d) +{ + struct iio_dev *indio_dev = d; + struct rm3100_data *data = iio_priv(indio_dev); + + if (!iio_buffer_enabled(indio_dev)) + complete(&data->measuring_done); + else + iio_trigger_poll(data->drdy_trig); + + return IRQ_WAKE_THREAD; +} + +static int rm3100_wait_measurement(struct rm3100_data *data) +{ + struct regmap *regmap = data->regmap; + unsigned int val; + int tries = 20; + int ret; + + /* + * A read cycle of 400kbits i2c bus is about 20us, plus the time + * used for scheduling, a read cycle of fast mode of this device + * can reach 1.7ms, it may be possible for data to arrive just + * after we check the RM3100_REG_STATUS. In this case, irq_handler is + * called before measuring_done is reinitialized, it will wait + * forever for data that has already been ready. + * Reinitialize measuring_done before looking up makes sure we + * will always capture interrupt no matter when it happens. + */ + if (data->use_interrupt) + reinit_completion(&data->measuring_done); + + ret = regmap_read(regmap, RM3100_REG_STATUS, &val); + if (ret < 0) + return ret; + + if ((val & RM3100_STATUS_DRDY) != RM3100_STATUS_DRDY) { + if (data->use_interrupt) { + ret = wait_for_completion_timeout(&data->measuring_done, + msecs_to_jiffies(data->conversion_time)); + if (!ret) + return -ETIMEDOUT; + } else { + do { + usleep_range(1000, 5000); + + ret = regmap_read(regmap, RM3100_REG_STATUS, + &val); + if (ret < 0) + return ret; + + if (val & RM3100_STATUS_DRDY) + break; + } while (--tries); + if (!tries) + return -ETIMEDOUT; + } + } + return 0; +} + +static int rm3100_read_mag(struct rm3100_data *data, int idx, int *val) +{ + struct regmap *regmap = data->regmap; + u8 buffer[3]; + int ret; + + mutex_lock(&data->lock); + ret = regmap_write(regmap, RM3100_REG_POLL, BIT(4 + idx)); + if (ret < 0) + goto unlock_return; + + ret = rm3100_wait_measurement(data); + if (ret < 0) + goto unlock_return; + + ret = regmap_bulk_read(regmap, RM3100_REG_MX2 + 3 * idx, buffer, 3); + if (ret < 0) + goto unlock_return; + mutex_unlock(&data->lock); + + *val = sign_extend32(get_unaligned_be24(&buffer[0]), 23); + + return IIO_VAL_INT; + +unlock_return: + mutex_unlock(&data->lock); + return ret; +} + +#define RM3100_CHANNEL(axis, idx) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 24, \ + .storagebits = 32, \ + .shift = 8, \ + .endianness = IIO_BE, \ + }, \ + } + +static const struct iio_chan_spec rm3100_channels[] = { + RM3100_CHANNEL(X, 0), + RM3100_CHANNEL(Y, 1), + RM3100_CHANNEL(Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( + "600 300 150 75 37 18 9 4.5 2.3 1.2 0.6 0.3 0.015 0.075" +); + +static struct attribute *rm3100_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group rm3100_attribute_group = { + .attrs = rm3100_attributes, +}; + +#define RM3100_SAMP_NUM 14 + +/* + * Frequency : rm3100_samp_rates[][0].rm3100_samp_rates[][1]Hz. + * Time between reading: rm3100_sam_rates[][2]ms. + * The first one is actually 1.7ms. + */ +static const int rm3100_samp_rates[RM3100_SAMP_NUM][3] = { + {600, 0, 2}, {300, 0, 3}, {150, 0, 7}, {75, 0, 13}, {37, 0, 27}, + {18, 0, 55}, {9, 0, 110}, {4, 500000, 220}, {2, 300000, 440}, + {1, 200000, 800}, {0, 600000, 1600}, {0, 300000, 3300}, + {0, 15000, 6700}, {0, 75000, 13000} +}; + +static int rm3100_get_samp_freq(struct rm3100_data *data, int *val, int *val2) +{ + unsigned int tmp; + int ret; + + mutex_lock(&data->lock); + ret = regmap_read(data->regmap, RM3100_REG_TMRC, &tmp); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][0]; + *val2 = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][1]; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int rm3100_set_cycle_count(struct rm3100_data *data, int val) +{ + int ret; + u8 i; + + for (i = 0; i < 3; i++) { + ret = regmap_write(data->regmap, RM3100_REG_CC_X + 2 * i, val); + if (ret < 0) + return ret; + } + + /* + * The scale of this sensor depends on the cycle count value, these + * three values are corresponding to the cycle count value 50, 100, + * 200. scale = output / gain * 10^4. + */ + switch (val) { + case 50: + data->scale = 500; + break; + case 100: + data->scale = 263; + break; + /* + * case 200: + * This function will never be called by users' code, so here we + * assume that it will never get a wrong parameter. + */ + default: + data->scale = 133; + } + + return 0; +} + +static int rm3100_set_samp_freq(struct iio_dev *indio_dev, int val, int val2) +{ + struct rm3100_data *data = iio_priv(indio_dev); + struct regmap *regmap = data->regmap; + unsigned int cycle_count; + int ret; + int i; + + mutex_lock(&data->lock); + /* All cycle count registers use the same value. */ + ret = regmap_read(regmap, RM3100_REG_CC_X, &cycle_count); + if (ret < 0) + goto unlock_return; + + for (i = 0; i < RM3100_SAMP_NUM; i++) { + if (val == rm3100_samp_rates[i][0] && + val2 == rm3100_samp_rates[i][1]) + break; + } + if (i == RM3100_SAMP_NUM) { + ret = -EINVAL; + goto unlock_return; + } + + ret = regmap_write(regmap, RM3100_REG_TMRC, i + RM3100_TMRC_OFFSET); + if (ret < 0) + goto unlock_return; + + /* Checking if cycle count registers need changing. */ + if (val == 600 && cycle_count == 200) { + ret = rm3100_set_cycle_count(data, 100); + if (ret < 0) + goto unlock_return; + } else if (val != 600 && cycle_count == 100) { + ret = rm3100_set_cycle_count(data, 200); + if (ret < 0) + goto unlock_return; + } + + if (iio_buffer_enabled(indio_dev)) { + /* Writing TMRC registers requires CMM reset. */ + ret = regmap_write(regmap, RM3100_REG_CMM, 0); + if (ret < 0) + goto unlock_return; + ret = regmap_write(data->regmap, RM3100_REG_CMM, + (*indio_dev->active_scan_mask & 0x7) << + RM3100_CMM_AXIS_SHIFT | RM3100_CMM_START); + if (ret < 0) + goto unlock_return; + } + mutex_unlock(&data->lock); + + data->conversion_time = rm3100_samp_rates[i][2] * 2; + return 0; + +unlock_return: + mutex_unlock(&data->lock); + return ret; +} + +static int rm3100_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct rm3100_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret < 0) + return ret; + + ret = rm3100_read_mag(data, chan->scan_index, val); + iio_device_release_direct_mode(indio_dev); + + return ret; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = data->scale; + + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SAMP_FREQ: + return rm3100_get_samp_freq(data, val, val2); + default: + return -EINVAL; + } +} + +static int rm3100_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return rm3100_set_samp_freq(indio_dev, val, val2); + default: + return -EINVAL; + } +} + +static const struct iio_info rm3100_info = { + .attrs = &rm3100_attribute_group, + .read_raw = rm3100_read_raw, + .write_raw = rm3100_write_raw, +}; + +static int rm3100_buffer_preenable(struct iio_dev *indio_dev) +{ + struct rm3100_data *data = iio_priv(indio_dev); + + /* Starting channels enabled. */ + return regmap_write(data->regmap, RM3100_REG_CMM, + (*indio_dev->active_scan_mask & 0x7) << RM3100_CMM_AXIS_SHIFT | + RM3100_CMM_START); +} + +static int rm3100_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct rm3100_data *data = iio_priv(indio_dev); + + return regmap_write(data->regmap, RM3100_REG_CMM, 0); +} + +static const struct iio_buffer_setup_ops rm3100_buffer_ops = { + .preenable = rm3100_buffer_preenable, + .postdisable = rm3100_buffer_postdisable, +}; + +static irqreturn_t rm3100_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + unsigned long scan_mask = *indio_dev->active_scan_mask; + unsigned int mask_len = indio_dev->masklength; + struct rm3100_data *data = iio_priv(indio_dev); + struct regmap *regmap = data->regmap; + int ret, i, bit; + + mutex_lock(&data->lock); + switch (scan_mask) { + case BIT(0) | BIT(1) | BIT(2): + ret = regmap_bulk_read(regmap, RM3100_REG_MX2, data->buffer, 9); + mutex_unlock(&data->lock); + if (ret < 0) + goto done; + /* Convert XXXYYYZZZxxx to XXXxYYYxZZZx. x for paddings. */ + for (i = 2; i > 0; i--) + memmove(data->buffer + i * 4, data->buffer + i * 3, 3); + break; + case BIT(0) | BIT(1): + ret = regmap_bulk_read(regmap, RM3100_REG_MX2, data->buffer, 6); + mutex_unlock(&data->lock); + if (ret < 0) + goto done; + memmove(data->buffer + 4, data->buffer + 3, 3); + break; + case BIT(1) | BIT(2): + ret = regmap_bulk_read(regmap, RM3100_REG_MY2, data->buffer, 6); + mutex_unlock(&data->lock); + if (ret < 0) + goto done; + memmove(data->buffer + 4, data->buffer + 3, 3); + break; + case BIT(0) | BIT(2): + ret = regmap_bulk_read(regmap, RM3100_REG_MX2, data->buffer, 9); + mutex_unlock(&data->lock); + if (ret < 0) + goto done; + memmove(data->buffer + 4, data->buffer + 6, 3); + break; + default: + for_each_set_bit(bit, &scan_mask, mask_len) { + ret = regmap_bulk_read(regmap, RM3100_REG_MX2 + 3 * bit, + data->buffer, 3); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + } + mutex_unlock(&data->lock); + } + /* + * Always using the same buffer so that we wouldn't need to set the + * paddings to 0 in case of leaking any data. + */ + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + pf->timestamp); +done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq) +{ + struct iio_dev *indio_dev; + struct rm3100_data *data; + unsigned int tmp; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->regmap = regmap; + + mutex_init(&data->lock); + + indio_dev->name = "rm3100"; + indio_dev->info = &rm3100_info; + indio_dev->channels = rm3100_channels; + indio_dev->num_channels = ARRAY_SIZE(rm3100_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + if (!irq) + data->use_interrupt = false; + else { + data->use_interrupt = true; + + init_completion(&data->measuring_done); + ret = devm_request_threaded_irq(dev, + irq, + rm3100_irq_handler, + rm3100_thread_fn, + IRQF_TRIGGER_HIGH | + IRQF_ONESHOT, + indio_dev->name, + indio_dev); + if (ret < 0) { + dev_err(dev, "request irq line failed.\n"); + return ret; + } + + data->drdy_trig = devm_iio_trigger_alloc(dev, "%s-drdy%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!data->drdy_trig) + return -ENOMEM; + + ret = devm_iio_trigger_register(dev, data->drdy_trig); + if (ret < 0) + return ret; + } + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + &iio_pollfunc_store_time, + rm3100_trigger_handler, + &rm3100_buffer_ops); + if (ret < 0) + return ret; + + ret = regmap_read(regmap, RM3100_REG_TMRC, &tmp); + if (ret < 0) + return ret; + /* Initializing max wait time, which is double conversion time. */ + data->conversion_time = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][2] + * 2; + + /* Cycle count values may not be what we want. */ + if ((tmp - RM3100_TMRC_OFFSET) == 0) + rm3100_set_cycle_count(data, 100); + else + rm3100_set_cycle_count(data, 200); + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_NS_GPL(rm3100_common_probe, IIO_RM3100); + +MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>"); +MODULE_DESCRIPTION("PNI RM3100 3-axis magnetometer i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/magnetometer/rm3100-i2c.c b/drivers/iio/magnetometer/rm3100-i2c.c new file mode 100644 index 0000000000..ac7276b379 --- /dev/null +++ b/drivers/iio/magnetometer/rm3100-i2c.c @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for PNI RM3100 3-axis geomagnetic sensor on a i2c bus. + * + * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com> + * + * i2c slave address: 0x20 + SA1 << 1 + SA0. + */ + +#include <linux/i2c.h> +#include <linux/module.h> + +#include "rm3100.h" + +static const struct regmap_config rm3100_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .rd_table = &rm3100_readable_table, + .wr_table = &rm3100_writable_table, + .volatile_table = &rm3100_volatile_table, + + .cache_type = REGCACHE_RBTREE, +}; + +static int rm3100_probe(struct i2c_client *client) +{ + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(client, &rm3100_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return rm3100_common_probe(&client->dev, regmap, client->irq); +} + +static const struct of_device_id rm3100_dt_match[] = { + { .compatible = "pni,rm3100", }, + { } +}; +MODULE_DEVICE_TABLE(of, rm3100_dt_match); + +static struct i2c_driver rm3100_driver = { + .driver = { + .name = "rm3100-i2c", + .of_match_table = rm3100_dt_match, + }, + .probe = rm3100_probe, +}; +module_i2c_driver(rm3100_driver); + +MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>"); +MODULE_DESCRIPTION("PNI RM3100 3-axis magnetometer i2c driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_RM3100); diff --git a/drivers/iio/magnetometer/rm3100-spi.c b/drivers/iio/magnetometer/rm3100-spi.c new file mode 100644 index 0000000000..76dc9b66cd --- /dev/null +++ b/drivers/iio/magnetometer/rm3100-spi.c @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for PNI RM3100 3-axis geomagnetic sensor on a spi bus. + * + * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com> + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> + +#include "rm3100.h" + +static const struct regmap_config rm3100_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .rd_table = &rm3100_readable_table, + .wr_table = &rm3100_writable_table, + .volatile_table = &rm3100_volatile_table, + + .read_flag_mask = 0x80, + + .cache_type = REGCACHE_RBTREE, +}; + +static int rm3100_probe(struct spi_device *spi) +{ + struct regmap *regmap; + int ret; + + /* Actually this device supports both mode 0 and mode 3. */ + spi->mode = SPI_MODE_0; + /* Data rates cannot exceed 1Mbits. */ + spi->max_speed_hz = 1000000; + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret) + return ret; + + regmap = devm_regmap_init_spi(spi, &rm3100_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return rm3100_common_probe(&spi->dev, regmap, spi->irq); +} + +static const struct of_device_id rm3100_dt_match[] = { + { .compatible = "pni,rm3100", }, + { } +}; +MODULE_DEVICE_TABLE(of, rm3100_dt_match); + +static struct spi_driver rm3100_driver = { + .driver = { + .name = "rm3100-spi", + .of_match_table = rm3100_dt_match, + }, + .probe = rm3100_probe, +}; +module_spi_driver(rm3100_driver); + +MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>"); +MODULE_DESCRIPTION("PNI RM3100 3-axis magnetometer spi driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_RM3100); diff --git a/drivers/iio/magnetometer/rm3100.h b/drivers/iio/magnetometer/rm3100.h new file mode 100644 index 0000000000..c3508218bc --- /dev/null +++ b/drivers/iio/magnetometer/rm3100.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com> + */ + +#ifndef RM3100_CORE_H +#define RM3100_CORE_H + +#include <linux/regmap.h> + +extern const struct regmap_access_table rm3100_readable_table; +extern const struct regmap_access_table rm3100_writable_table; +extern const struct regmap_access_table rm3100_volatile_table; + +int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq); + +#endif /* RM3100_CORE_H */ diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h new file mode 100644 index 0000000000..89945984d9 --- /dev/null +++ b/drivers/iio/magnetometer/st_magn.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * v. 1.0.0 + */ + +#ifndef ST_MAGN_H +#define ST_MAGN_H + +#include <linux/types.h> +#include <linux/iio/common/st_sensors.h> + +#define LSM303DLH_MAGN_DEV_NAME "lsm303dlh_magn" +#define LSM303DLHC_MAGN_DEV_NAME "lsm303dlhc_magn" +#define LSM303DLM_MAGN_DEV_NAME "lsm303dlm_magn" +#define LIS3MDL_MAGN_DEV_NAME "lis3mdl" +#define LSM303AGR_MAGN_DEV_NAME "lsm303agr_magn" +#define LIS2MDL_MAGN_DEV_NAME "lis2mdl" +#define LSM9DS1_MAGN_DEV_NAME "lsm9ds1_magn" +#define IIS2MDC_MAGN_DEV_NAME "iis2mdc" +#define LSM303C_MAGN_DEV_NAME "lsm303c_magn" + +#ifdef CONFIG_IIO_BUFFER +int st_magn_allocate_ring(struct iio_dev *indio_dev); +int st_magn_trig_set_state(struct iio_trigger *trig, bool state); +#define ST_MAGN_TRIGGER_SET_STATE (&st_magn_trig_set_state) +#else /* CONFIG_IIO_BUFFER */ +static inline int st_magn_allocate_ring(struct iio_dev *indio_dev) +{ + return 0; +} +#define ST_MAGN_TRIGGER_SET_STATE NULL +#endif /* CONFIG_IIO_BUFFER */ + +#endif /* ST_MAGN_H */ diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c new file mode 100644 index 0000000000..79987f42e8 --- /dev/null +++ b/drivers/iio/magnetometer/st_magn_buffer.c @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + */ + +#include <linux/kernel.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_magn.h" + +int st_magn_trig_set_state(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + + return st_sensors_set_dataready_irq(indio_dev, state); +} + +static int st_magn_buffer_postenable(struct iio_dev *indio_dev) +{ + return st_sensors_set_enable(indio_dev, true); +} + +static int st_magn_buffer_predisable(struct iio_dev *indio_dev) +{ + return st_sensors_set_enable(indio_dev, false); +} + +static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = { + .postenable = &st_magn_buffer_postenable, + .predisable = &st_magn_buffer_predisable, +}; + +int st_magn_allocate_ring(struct iio_dev *indio_dev) +{ + return devm_iio_triggered_buffer_setup(indio_dev->dev.parent, indio_dev, + NULL, &st_sensors_trigger_handler, &st_magn_buffer_setup_ops); +} + diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c new file mode 100644 index 0000000000..6cc0dfd318 --- /dev/null +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -0,0 +1,656 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/sysfs.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_magn.h" + +#define ST_MAGN_NUMBER_DATA_CHANNELS 3 + +/* DEFAULT VALUE FOR SENSORS */ +#define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0x03 +#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0x07 +#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0x05 + +/* FULLSCALE */ +#define ST_MAGN_FS_AVL_1300MG 1300 +#define ST_MAGN_FS_AVL_1900MG 1900 +#define ST_MAGN_FS_AVL_2000MG 2000 +#define ST_MAGN_FS_AVL_2500MG 2500 +#define ST_MAGN_FS_AVL_4000MG 4000 +#define ST_MAGN_FS_AVL_4700MG 4700 +#define ST_MAGN_FS_AVL_5600MG 5600 +#define ST_MAGN_FS_AVL_8000MG 8000 +#define ST_MAGN_FS_AVL_8100MG 8100 +#define ST_MAGN_FS_AVL_12000MG 12000 +#define ST_MAGN_FS_AVL_15000MG 15000 +#define ST_MAGN_FS_AVL_16000MG 16000 + +/* Special L addresses for Sensor 2 */ +#define ST_MAGN_2_OUT_X_L_ADDR 0x28 +#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a +#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c + +/* Special L addresses for sensor 3 */ +#define ST_MAGN_3_OUT_X_L_ADDR 0x68 +#define ST_MAGN_3_OUT_Y_L_ADDR 0x6a +#define ST_MAGN_3_OUT_Z_L_ADDR 0x6c + +/* Special L addresses for sensor 4 */ +#define ST_MAGN_4_OUT_X_L_ADDR 0x08 +#define ST_MAGN_4_OUT_Y_L_ADDR 0x0a +#define ST_MAGN_4_OUT_Z_L_ADDR 0x0c + +static const struct iio_mount_matrix * +st_magn_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct st_sensor_data *mdata = iio_priv(indio_dev); + + return &mdata->mount_matrix; +} + +static const struct iio_chan_spec_ext_info st_magn_mount_matrix_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, st_magn_get_mount_matrix), + { } +}; + +static const struct iio_chan_spec st_magn_16bit_channels[] = { + ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16, + ST_MAGN_DEFAULT_OUT_X_H_ADDR, + st_magn_mount_matrix_ext_info), + ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16, + ST_MAGN_DEFAULT_OUT_Y_H_ADDR, + st_magn_mount_matrix_ext_info), + ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16, + ST_MAGN_DEFAULT_OUT_Z_H_ADDR, + st_magn_mount_matrix_ext_info), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct iio_chan_spec st_magn_2_16bit_channels[] = { + ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16, + ST_MAGN_2_OUT_X_L_ADDR, + st_magn_mount_matrix_ext_info), + ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16, + ST_MAGN_2_OUT_Y_L_ADDR, + st_magn_mount_matrix_ext_info), + ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16, + ST_MAGN_2_OUT_Z_L_ADDR, + st_magn_mount_matrix_ext_info), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct iio_chan_spec st_magn_3_16bit_channels[] = { + ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16, + ST_MAGN_3_OUT_X_L_ADDR, + st_magn_mount_matrix_ext_info), + ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16, + ST_MAGN_3_OUT_Y_L_ADDR, + st_magn_mount_matrix_ext_info), + ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16, + ST_MAGN_3_OUT_Z_L_ADDR, + st_magn_mount_matrix_ext_info), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct iio_chan_spec st_magn_4_16bit_channels[] = { + ST_SENSORS_LSM_CHANNELS(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16, + ST_MAGN_4_OUT_X_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16, + ST_MAGN_4_OUT_Y_L_ADDR), + ST_SENSORS_LSM_CHANNELS(IIO_MAGN, + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16, + ST_MAGN_4_OUT_Z_L_ADDR), + IIO_CHAN_SOFT_TIMESTAMP(3) +}; + +static const struct st_sensor_settings st_magn_sensors_settings[] = { + { + .wai = 0, /* This sensor has no valid WhoAmI report 0 */ + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LSM303DLH_MAGN_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_magn_16bit_channels, + .odr = { + .addr = 0x00, + .mask = 0x1c, + .odr_avl = { + { .hz = 1, .value = 0x00 }, + { .hz = 2, .value = 0x01 }, + { .hz = 3, .value = 0x02 }, + { .hz = 8, .value = 0x03 }, + { .hz = 15, .value = 0x04 }, + { .hz = 30, .value = 0x05 }, + { .hz = 75, .value = 0x06 }, + /* 220 Hz, 0x07 reportedly exist */ + }, + }, + .pw = { + .addr = 0x02, + .mask = 0x03, + .value_on = 0x00, + .value_off = 0x03, + }, + .fs = { + .addr = 0x01, + .mask = 0xe0, + .fs_avl = { + [0] = { + .num = ST_MAGN_FS_AVL_1300MG, + .value = 0x01, + .gain = 1100, + .gain2 = 980, + }, + [1] = { + .num = ST_MAGN_FS_AVL_1900MG, + .value = 0x02, + .gain = 855, + .gain2 = 760, + }, + [2] = { + .num = ST_MAGN_FS_AVL_2500MG, + .value = 0x03, + .gain = 670, + .gain2 = 600, + }, + [3] = { + .num = ST_MAGN_FS_AVL_4000MG, + .value = 0x04, + .gain = 450, + .gain2 = 400, + }, + [4] = { + .num = ST_MAGN_FS_AVL_4700MG, + .value = 0x05, + .gain = 400, + .gain2 = 355, + }, + [5] = { + .num = ST_MAGN_FS_AVL_5600MG, + .value = 0x06, + .gain = 330, + .gain2 = 295, + }, + [6] = { + .num = ST_MAGN_FS_AVL_8100MG, + .value = 0x07, + .gain = 230, + .gain2 = 205, + }, + }, + }, + .multi_read_bit = false, + .bootime = 2, + }, + { + .wai = 0x3c, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LSM303DLHC_MAGN_DEV_NAME, + [1] = LSM303DLM_MAGN_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_magn_16bit_channels, + .odr = { + .addr = 0x00, + .mask = 0x1c, + .odr_avl = { + { .hz = 1, .value = 0x00 }, + { .hz = 2, .value = 0x01 }, + { .hz = 3, .value = 0x02 }, + { .hz = 8, .value = 0x03 }, + { .hz = 15, .value = 0x04 }, + { .hz = 30, .value = 0x05 }, + { .hz = 75, .value = 0x06 }, + { .hz = 220, .value = 0x07 }, + }, + }, + .pw = { + .addr = 0x02, + .mask = 0x03, + .value_on = 0x00, + .value_off = 0x03, + }, + .fs = { + .addr = 0x01, + .mask = 0xe0, + .fs_avl = { + [0] = { + .num = ST_MAGN_FS_AVL_1300MG, + .value = 0x01, + .gain = 909, + .gain2 = 1020, + }, + [1] = { + .num = ST_MAGN_FS_AVL_1900MG, + .value = 0x02, + .gain = 1169, + .gain2 = 1315, + }, + [2] = { + .num = ST_MAGN_FS_AVL_2500MG, + .value = 0x03, + .gain = 1492, + .gain2 = 1666, + }, + [3] = { + .num = ST_MAGN_FS_AVL_4000MG, + .value = 0x04, + .gain = 2222, + .gain2 = 2500, + }, + [4] = { + .num = ST_MAGN_FS_AVL_4700MG, + .value = 0x05, + .gain = 2500, + .gain2 = 2816, + }, + [5] = { + .num = ST_MAGN_FS_AVL_5600MG, + .value = 0x06, + .gain = 3030, + .gain2 = 3389, + }, + [6] = { + .num = ST_MAGN_FS_AVL_8100MG, + .value = 0x07, + .gain = 4347, + .gain2 = 4878, + }, + }, + }, + .multi_read_bit = false, + .bootime = 2, + }, + { + .wai = 0x3d, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LIS3MDL_MAGN_DEV_NAME, + [1] = LSM9DS1_MAGN_DEV_NAME, + [2] = LSM303C_MAGN_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_magn_2_16bit_channels, + .odr = { + .addr = 0x20, + .mask = 0x1c, + .odr_avl = { + { .hz = 1, .value = 0x00 }, + { .hz = 2, .value = 0x01 }, + { .hz = 3, .value = 0x02 }, + { .hz = 5, .value = 0x03 }, + { .hz = 10, .value = 0x04 }, + { .hz = 20, .value = 0x05 }, + { .hz = 40, .value = 0x06 }, + { .hz = 80, .value = 0x07 }, + }, + }, + .pw = { + .addr = 0x22, + .mask = 0x03, + .value_on = 0x00, + .value_off = 0x03, + }, + .fs = { + .addr = 0x21, + .mask = 0x60, + .fs_avl = { + [0] = { + .num = ST_MAGN_FS_AVL_4000MG, + .value = 0x00, + .gain = 146, + }, + [1] = { + .num = ST_MAGN_FS_AVL_8000MG, + .value = 0x01, + .gain = 292, + }, + [2] = { + .num = ST_MAGN_FS_AVL_12000MG, + .value = 0x02, + .gain = 438, + }, + [3] = { + .num = ST_MAGN_FS_AVL_16000MG, + .value = 0x03, + .gain = 584, + }, + }, + }, + .bdu = { + .addr = 0x24, + .mask = 0x40, + }, + .drdy_irq = { + /* drdy line is routed drdy pin */ + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, + }, + .sim = { + .addr = 0x22, + .value = BIT(2), + }, + .multi_read_bit = true, + .bootime = 2, + }, + { + .wai = 0x40, + .wai_addr = 0x4f, + .sensors_supported = { + [0] = LSM303AGR_MAGN_DEV_NAME, + [1] = LIS2MDL_MAGN_DEV_NAME, + [2] = IIS2MDC_MAGN_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_magn_3_16bit_channels, + .odr = { + .addr = 0x60, + .mask = 0x0c, + .odr_avl = { + { .hz = 10, .value = 0x00 }, + { .hz = 20, .value = 0x01 }, + { .hz = 50, .value = 0x02 }, + { .hz = 100, .value = 0x03 }, + }, + }, + .pw = { + .addr = 0x60, + .mask = 0x03, + .value_on = 0x00, + .value_off = 0x03, + }, + .fs = { + .fs_avl = { + [0] = { + .num = ST_MAGN_FS_AVL_15000MG, + .gain = 1500, + }, + }, + }, + .bdu = { + .addr = 0x62, + .mask = 0x10, + }, + .drdy_irq = { + .int1 = { + .addr = 0x62, + .mask = 0x01, + }, + .stat_drdy = { + .addr = 0x67, + .mask = 0x07, + }, + }, + .multi_read_bit = false, + .bootime = 2, + }, + { + .wai = 0x49, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LSM9DS0_IMU_DEV_NAME, + [1] = LSM303D_IMU_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_magn_4_16bit_channels, + .odr = { + .addr = 0x24, + .mask = GENMASK(4, 2), + .odr_avl = { + { 3, 0x00, }, + { 6, 0x01, }, + { 12, 0x02, }, + { 25, 0x03, }, + { 50, 0x04, }, + { 100, 0x05, }, + }, + }, + .pw = { + .addr = 0x26, + .mask = GENMASK(1, 0), + .value_on = 0x00, + .value_off = 0x03, + }, + .fs = { + .addr = 0x25, + .mask = GENMASK(6, 5), + .fs_avl = { + [0] = { + .num = ST_MAGN_FS_AVL_2000MG, + .value = 0x00, + .gain = 73, + }, + [1] = { + .num = ST_MAGN_FS_AVL_4000MG, + .value = 0x01, + .gain = 146, + }, + [2] = { + .num = ST_MAGN_FS_AVL_8000MG, + .value = 0x02, + .gain = 292, + }, + [3] = { + .num = ST_MAGN_FS_AVL_12000MG, + .value = 0x03, + .gain = 438, + }, + }, + }, + .bdu = { + .addr = 0x20, + .mask = BIT(3), + }, + .drdy_irq = { + .int1 = { + .addr = 0x22, + .mask = BIT(1), + }, + .int2 = { + .addr = 0x23, + .mask = BIT(2), + }, + .stat_drdy = { + .addr = 0x07, + .mask = GENMASK(2, 0), + }, + }, + .sim = { + .addr = 0x21, + .value = BIT(0), + }, + .multi_read_bit = true, + .bootime = 2, + }, +}; + +/* Default magn DRDY is available on INT2 pin */ +static const struct st_sensors_platform_data default_magn_pdata = { + .drdy_int_pin = 2, +}; + +static int st_magn_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val, + int *val2, long mask) +{ + int err; + struct st_sensor_data *mdata = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + err = st_sensors_read_info_raw(indio_dev, ch, val); + if (err < 0) + goto read_error; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + if ((ch->scan_index == ST_SENSORS_SCAN_Z) && + (mdata->current_fullscale->gain2 != 0)) + *val2 = mdata->current_fullscale->gain2; + else + *val2 = mdata->current_fullscale->gain; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = mdata->odr; + return IIO_VAL_INT; + default: + return -EINVAL; + } + +read_error: + return err; +} + +static int st_magn_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return st_sensors_set_fullscale_by_gain(indio_dev, val2); + case IIO_CHAN_INFO_SAMP_FREQ: + if (val2) + return -EINVAL; + + return st_sensors_set_odr(indio_dev, val); + default: + return -EINVAL; + } +} + +static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL(); +static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available); + +static struct attribute *st_magn_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_magn_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_magn_attribute_group = { + .attrs = st_magn_attributes, +}; + +static const struct iio_info magn_info = { + .attrs = &st_magn_attribute_group, + .read_raw = &st_magn_read_raw, + .write_raw = &st_magn_write_raw, + .debugfs_reg_access = &st_sensors_debugfs_reg_access, +}; + +#ifdef CONFIG_IIO_TRIGGER +static const struct iio_trigger_ops st_magn_trigger_ops = { + .set_trigger_state = ST_MAGN_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, +}; +#define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops) +#else +#define ST_MAGN_TRIGGER_OPS NULL +#endif + +/* + * st_magn_get_settings() - get sensor settings from device name + * @name: device name buffer reference. + * + * Return: valid reference on success, NULL otherwise. + */ +const struct st_sensor_settings *st_magn_get_settings(const char *name) +{ + int index = st_sensors_get_settings_index(name, + st_magn_sensors_settings, + ARRAY_SIZE(st_magn_sensors_settings)); + if (index < 0) + return NULL; + + return &st_magn_sensors_settings[index]; +} +EXPORT_SYMBOL_NS(st_magn_get_settings, IIO_ST_SENSORS); + +int st_magn_common_probe(struct iio_dev *indio_dev) +{ + struct st_sensor_data *mdata = iio_priv(indio_dev); + struct device *parent = indio_dev->dev.parent; + struct st_sensors_platform_data *pdata = dev_get_platdata(parent); + int err; + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &magn_info; + + err = st_sensors_verify_id(indio_dev); + if (err < 0) + return err; + + mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS; + indio_dev->channels = mdata->sensor_settings->ch; + indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS; + + err = iio_read_mount_matrix(parent, &mdata->mount_matrix); + if (err) + return err; + + mdata->current_fullscale = &mdata->sensor_settings->fs.fs_avl[0]; + mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz; + + if (!pdata) + pdata = (struct st_sensors_platform_data *)&default_magn_pdata; + + err = st_sensors_init_sensor(indio_dev, pdata); + if (err < 0) + return err; + + err = st_magn_allocate_ring(indio_dev); + if (err < 0) + return err; + + if (mdata->irq > 0) { + err = st_sensors_allocate_trigger(indio_dev, + ST_MAGN_TRIGGER_OPS); + if (err < 0) + return err; + } + + return devm_iio_device_register(parent, indio_dev); +} +EXPORT_SYMBOL_NS(st_magn_common_probe, IIO_ST_SENSORS); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics magnetometers driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_ST_SENSORS); diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c new file mode 100644 index 0000000000..950826dd20 --- /dev/null +++ b/drivers/iio/magnetometer/st_magn_i2c.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_i2c.h> +#include "st_magn.h" + +static const struct of_device_id st_magn_of_match[] = { + { + .compatible = "st,lsm303dlh-magn", + .data = LSM303DLH_MAGN_DEV_NAME, + }, + { + .compatible = "st,lsm303dlhc-magn", + .data = LSM303DLHC_MAGN_DEV_NAME, + }, + { + .compatible = "st,lsm303dlm-magn", + .data = LSM303DLM_MAGN_DEV_NAME, + }, + { + .compatible = "st,lis3mdl-magn", + .data = LIS3MDL_MAGN_DEV_NAME, + }, + { + .compatible = "st,lsm303agr-magn", + .data = LSM303AGR_MAGN_DEV_NAME, + }, + { + .compatible = "st,lis2mdl", + .data = LIS2MDL_MAGN_DEV_NAME, + }, + { + .compatible = "st,lsm9ds1-magn", + .data = LSM9DS1_MAGN_DEV_NAME, + }, + { + .compatible = "st,iis2mdc", + .data = IIS2MDC_MAGN_DEV_NAME, + }, + { + .compatible = "st,lsm303c-magn", + .data = LSM303C_MAGN_DEV_NAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_magn_of_match); + +static int st_magn_i2c_probe(struct i2c_client *client) +{ + const struct st_sensor_settings *settings; + struct st_sensor_data *mdata; + struct iio_dev *indio_dev; + int err; + + st_sensors_dev_name_probe(&client->dev, client->name, sizeof(client->name)); + + settings = st_magn_get_settings(client->name); + if (!settings) { + dev_err(&client->dev, "device name %s not recognized.\n", + client->name); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*mdata)); + if (!indio_dev) + return -ENOMEM; + + mdata = iio_priv(indio_dev); + mdata->sensor_settings = (struct st_sensor_settings *)settings; + + err = st_sensors_i2c_configure(indio_dev, client); + if (err < 0) + return err; + + err = st_sensors_power_enable(indio_dev); + if (err) + return err; + + return st_magn_common_probe(indio_dev); +} + +static const struct i2c_device_id st_magn_id_table[] = { + { LSM303DLH_MAGN_DEV_NAME }, + { LSM303DLHC_MAGN_DEV_NAME }, + { LSM303DLM_MAGN_DEV_NAME }, + { LIS3MDL_MAGN_DEV_NAME }, + { LSM303AGR_MAGN_DEV_NAME }, + { LIS2MDL_MAGN_DEV_NAME }, + { LSM9DS1_MAGN_DEV_NAME }, + { IIS2MDC_MAGN_DEV_NAME }, + { LSM303C_MAGN_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, st_magn_id_table); + +static struct i2c_driver st_magn_driver = { + .driver = { + .name = "st-magn-i2c", + .of_match_table = st_magn_of_match, + }, + .probe = st_magn_i2c_probe, + .id_table = st_magn_id_table, +}; +module_i2c_driver(st_magn_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics magnetometers i2c driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_ST_SENSORS); diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c new file mode 100644 index 0000000000..f203e1f87e --- /dev/null +++ b/drivers/iio/magnetometer/st_magn_spi.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics magnetometers driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/spi/spi.h> +#include <linux/iio/iio.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_spi.h> +#include "st_magn.h" + +/* + * For new single-chip sensors use <device_name> as compatible string. + * For old single-chip devices keep <device_name>-magn to maintain + * compatibility + * For multi-chip devices, use <device_name>-magn to distinguish which + * capability is being used + */ +static const struct of_device_id st_magn_of_match[] = { + { + .compatible = "st,lis3mdl-magn", + .data = LIS3MDL_MAGN_DEV_NAME, + }, + { + .compatible = "st,lsm303agr-magn", + .data = LSM303AGR_MAGN_DEV_NAME, + }, + { + .compatible = "st,lis2mdl", + .data = LIS2MDL_MAGN_DEV_NAME, + }, + { + .compatible = "st,lsm9ds1-magn", + .data = LSM9DS1_MAGN_DEV_NAME, + }, + { + .compatible = "st,iis2mdc", + .data = IIS2MDC_MAGN_DEV_NAME, + }, + { + .compatible = "st,lsm303c-magn", + .data = LSM303C_MAGN_DEV_NAME, + }, + {} +}; +MODULE_DEVICE_TABLE(of, st_magn_of_match); + +static int st_magn_spi_probe(struct spi_device *spi) +{ + const struct st_sensor_settings *settings; + struct st_sensor_data *mdata; + struct iio_dev *indio_dev; + int err; + + st_sensors_dev_name_probe(&spi->dev, spi->modalias, sizeof(spi->modalias)); + + settings = st_magn_get_settings(spi->modalias); + if (!settings) { + dev_err(&spi->dev, "device name %s not recognized.\n", + spi->modalias); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*mdata)); + if (!indio_dev) + return -ENOMEM; + + mdata = iio_priv(indio_dev); + mdata->sensor_settings = (struct st_sensor_settings *)settings; + + err = st_sensors_spi_configure(indio_dev, spi); + if (err < 0) + return err; + + err = st_sensors_power_enable(indio_dev); + if (err) + return err; + + return st_magn_common_probe(indio_dev); +} + +static const struct spi_device_id st_magn_id_table[] = { + { LIS3MDL_MAGN_DEV_NAME }, + { LSM303AGR_MAGN_DEV_NAME }, + { LIS2MDL_MAGN_DEV_NAME }, + { LSM9DS1_MAGN_DEV_NAME }, + { IIS2MDC_MAGN_DEV_NAME }, + { LSM303C_MAGN_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(spi, st_magn_id_table); + +static struct spi_driver st_magn_driver = { + .driver = { + .name = "st-magn-spi", + .of_match_table = st_magn_of_match, + }, + .probe = st_magn_spi_probe, + .id_table = st_magn_id_table, +}; +module_spi_driver(st_magn_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics magnetometers spi driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_ST_SENSORS); diff --git a/drivers/iio/magnetometer/tmag5273.c b/drivers/iio/magnetometer/tmag5273.c new file mode 100644 index 0000000000..e8c4ca142d --- /dev/null +++ b/drivers/iio/magnetometer/tmag5273.c @@ -0,0 +1,744 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for the TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor + * + * Copyright (C) 2022 WolfVision GmbH + * + * Author: Gerald Loacker <gerald.loacker@wolfvision.net> + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/pm_runtime.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define TMAG5273_DEVICE_CONFIG_1 0x00 +#define TMAG5273_DEVICE_CONFIG_2 0x01 +#define TMAG5273_SENSOR_CONFIG_1 0x02 +#define TMAG5273_SENSOR_CONFIG_2 0x03 +#define TMAG5273_X_THR_CONFIG 0x04 +#define TMAG5273_Y_THR_CONFIG 0x05 +#define TMAG5273_Z_THR_CONFIG 0x06 +#define TMAG5273_T_CONFIG 0x07 +#define TMAG5273_INT_CONFIG_1 0x08 +#define TMAG5273_MAG_GAIN_CONFIG 0x09 +#define TMAG5273_MAG_OFFSET_CONFIG_1 0x0A +#define TMAG5273_MAG_OFFSET_CONFIG_2 0x0B +#define TMAG5273_I2C_ADDRESS 0x0C +#define TMAG5273_DEVICE_ID 0x0D +#define TMAG5273_MANUFACTURER_ID_LSB 0x0E +#define TMAG5273_MANUFACTURER_ID_MSB 0x0F +#define TMAG5273_T_MSB_RESULT 0x10 +#define TMAG5273_T_LSB_RESULT 0x11 +#define TMAG5273_X_MSB_RESULT 0x12 +#define TMAG5273_X_LSB_RESULT 0x13 +#define TMAG5273_Y_MSB_RESULT 0x14 +#define TMAG5273_Y_LSB_RESULT 0x15 +#define TMAG5273_Z_MSB_RESULT 0x16 +#define TMAG5273_Z_LSB_RESULT 0x17 +#define TMAG5273_CONV_STATUS 0x18 +#define TMAG5273_ANGLE_RESULT_MSB 0x19 +#define TMAG5273_ANGLE_RESULT_LSB 0x1A +#define TMAG5273_MAGNITUDE_RESULT 0x1B +#define TMAG5273_DEVICE_STATUS 0x1C +#define TMAG5273_MAX_REG TMAG5273_DEVICE_STATUS + +#define TMAG5273_AUTOSLEEP_DELAY_MS 5000 +#define TMAG5273_MAX_AVERAGE 32 + +/* + * bits in the TMAG5273_MANUFACTURER_ID_LSB / MSB register + * 16-bit unique manufacturer ID 0x49 / 0x54 = "TI" + */ +#define TMAG5273_MANUFACTURER_ID 0x5449 + +/* bits in the TMAG5273_DEVICE_CONFIG_1 register */ +#define TMAG5273_AVG_MODE_MASK GENMASK(4, 2) +#define TMAG5273_AVG_1_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 0) +#define TMAG5273_AVG_2_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 1) +#define TMAG5273_AVG_4_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 2) +#define TMAG5273_AVG_8_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 3) +#define TMAG5273_AVG_16_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 4) +#define TMAG5273_AVG_32_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 5) + +/* bits in the TMAG5273_DEVICE_CONFIG_2 register */ +#define TMAG5273_OP_MODE_MASK GENMASK(1, 0) +#define TMAG5273_OP_MODE_STANDBY FIELD_PREP(TMAG5273_OP_MODE_MASK, 0) +#define TMAG5273_OP_MODE_SLEEP FIELD_PREP(TMAG5273_OP_MODE_MASK, 1) +#define TMAG5273_OP_MODE_CONT FIELD_PREP(TMAG5273_OP_MODE_MASK, 2) +#define TMAG5273_OP_MODE_WAKEUP FIELD_PREP(TMAG5273_OP_MODE_MASK, 3) + +/* bits in the TMAG5273_SENSOR_CONFIG_1 register */ +#define TMAG5273_MAG_CH_EN_MASK GENMASK(7, 4) +#define TMAG5273_MAG_CH_EN_X_Y_Z 7 + +/* bits in the TMAG5273_SENSOR_CONFIG_2 register */ +#define TMAG5273_Z_RANGE_MASK BIT(0) +#define TMAG5273_X_Y_RANGE_MASK BIT(1) +#define TMAG5273_ANGLE_EN_MASK GENMASK(3, 2) +#define TMAG5273_ANGLE_EN_OFF 0 +#define TMAG5273_ANGLE_EN_X_Y 1 +#define TMAG5273_ANGLE_EN_Y_Z 2 +#define TMAG5273_ANGLE_EN_X_Z 3 + +/* bits in the TMAG5273_T_CONFIG register */ +#define TMAG5273_T_CH_EN BIT(0) + +/* bits in the TMAG5273_DEVICE_ID register */ +#define TMAG5273_VERSION_MASK GENMASK(1, 0) + +/* bits in the TMAG5273_CONV_STATUS register */ +#define TMAG5273_CONV_STATUS_COMPLETE BIT(0) + +enum tmag5273_channels { + TEMPERATURE = 0, + AXIS_X, + AXIS_Y, + AXIS_Z, + ANGLE, + MAGNITUDE, +}; + +enum tmag5273_scale_index { + MAGN_RANGE_LOW = 0, + MAGN_RANGE_HIGH, + MAGN_RANGE_NUM +}; + +/* state container for the TMAG5273 driver */ +struct tmag5273_data { + struct device *dev; + unsigned int devid; + unsigned int version; + char name[16]; + unsigned int conv_avg; + unsigned int scale; + enum tmag5273_scale_index scale_index; + unsigned int angle_measurement; + struct regmap *map; + struct regulator *vcc; + + /* + * Locks the sensor for exclusive use during a measurement (which + * involves several register transactions so the regmap lock is not + * enough) so that measurements get serialized in a + * first-come-first-serve manner. + */ + struct mutex lock; +}; + +static const char *const tmag5273_angle_names[] = { "off", "x-y", "y-z", "x-z" }; + +/* + * Averaging enables additional sampling of the sensor data to reduce the noise + * effect, but also increases conversion time. + */ +static const unsigned int tmag5273_avg_table[] = { + 1, 2, 4, 8, 16, 32, +}; + +/* + * Magnetic resolution in Gauss for different TMAG5273 versions. + * Scale[Gauss] = Range[mT] * 1000 / 2^15 * 10, (1 mT = 10 Gauss) + * Only version 1 and 2 are valid, version 0 and 3 are reserved. + */ +static const struct iio_val_int_plus_micro tmag5273_scale[][MAGN_RANGE_NUM] = { + { { 0, 0 }, { 0, 0 } }, + { { 0, 12200 }, { 0, 24400 } }, + { { 0, 40600 }, { 0, 81200 } }, + { { 0, 0 }, { 0, 0 } }, +}; + +static int tmag5273_get_measure(struct tmag5273_data *data, s16 *t, s16 *x, + s16 *y, s16 *z, u16 *angle, u16 *magnitude) +{ + unsigned int status, val; + __be16 reg_data[4]; + int ret; + + mutex_lock(&data->lock); + + /* + * Max. conversion time is 2425 us in 32x averaging mode for all three + * channels. Since we are in continuous measurement mode, a measurement + * may already be there, so poll for completed measurement with + * timeout. + */ + ret = regmap_read_poll_timeout(data->map, TMAG5273_CONV_STATUS, status, + status & TMAG5273_CONV_STATUS_COMPLETE, + 100, 10000); + if (ret) { + dev_err(data->dev, "timeout waiting for measurement\n"); + goto out_unlock; + } + + ret = regmap_bulk_read(data->map, TMAG5273_T_MSB_RESULT, reg_data, + sizeof(reg_data)); + if (ret) + goto out_unlock; + *t = be16_to_cpu(reg_data[0]); + *x = be16_to_cpu(reg_data[1]); + *y = be16_to_cpu(reg_data[2]); + *z = be16_to_cpu(reg_data[3]); + + ret = regmap_bulk_read(data->map, TMAG5273_ANGLE_RESULT_MSB, + ®_data[0], sizeof(reg_data[0])); + if (ret) + goto out_unlock; + /* + * angle has 9 bits integer value and 4 bits fractional part + * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + * 0 0 0 a a a a a a a a a f f f f + */ + *angle = be16_to_cpu(reg_data[0]); + + ret = regmap_read(data->map, TMAG5273_MAGNITUDE_RESULT, &val); + if (ret < 0) + goto out_unlock; + *magnitude = val; + +out_unlock: + mutex_unlock(&data->lock); + return ret; +} + +static int tmag5273_write_osr(struct tmag5273_data *data, int val) +{ + int i; + + if (val == data->conv_avg) + return 0; + + for (i = 0; i < ARRAY_SIZE(tmag5273_avg_table); i++) { + if (tmag5273_avg_table[i] == val) + break; + } + if (i == ARRAY_SIZE(tmag5273_avg_table)) + return -EINVAL; + data->conv_avg = val; + + return regmap_update_bits(data->map, TMAG5273_DEVICE_CONFIG_1, + TMAG5273_AVG_MODE_MASK, + FIELD_PREP(TMAG5273_AVG_MODE_MASK, i)); +} + +static int tmag5273_write_scale(struct tmag5273_data *data, int scale_micro) +{ + u32 value; + int i; + + for (i = 0; i < ARRAY_SIZE(tmag5273_scale[0]); i++) { + if (tmag5273_scale[data->version][i].micro == scale_micro) + break; + } + if (i == ARRAY_SIZE(tmag5273_scale[0])) + return -EINVAL; + data->scale_index = i; + + if (data->scale_index == MAGN_RANGE_LOW) + value = 0; + else + value = TMAG5273_Z_RANGE_MASK | TMAG5273_X_Y_RANGE_MASK; + + return regmap_update_bits(data->map, TMAG5273_SENSOR_CONFIG_2, + TMAG5273_Z_RANGE_MASK | TMAG5273_X_Y_RANGE_MASK, value); +} + +static int tmag5273_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct tmag5273_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = tmag5273_avg_table; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(tmag5273_avg_table); + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_MAGN: + *type = IIO_VAL_INT_PLUS_MICRO; + *vals = (int *)tmag5273_scale[data->version]; + *length = ARRAY_SIZE(tmag5273_scale[data->version]) * + MAGN_RANGE_NUM; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int tmag5273_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, int *val, + int *val2, long mask) +{ + struct tmag5273_data *data = iio_priv(indio_dev); + s16 t, x, y, z; + u16 angle, magnitude; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + case IIO_CHAN_INFO_RAW: + ret = pm_runtime_resume_and_get(data->dev); + if (ret < 0) + return ret; + + ret = tmag5273_get_measure(data, &t, &x, &y, &z, &angle, &magnitude); + + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + + if (ret) + return ret; + + switch (chan->address) { + case TEMPERATURE: + *val = t; + return IIO_VAL_INT; + case AXIS_X: + *val = x; + return IIO_VAL_INT; + case AXIS_Y: + *val = y; + return IIO_VAL_INT; + case AXIS_Z: + *val = z; + return IIO_VAL_INT; + case ANGLE: + *val = angle; + return IIO_VAL_INT; + case MAGNITUDE: + *val = magnitude; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + /* + * Convert device specific value to millicelsius. + * Resolution from the sensor is 60.1 LSB/celsius and + * the reference value at 25 celsius is 17508 LSBs. + */ + *val = 10000; + *val2 = 601; + return IIO_VAL_FRACTIONAL; + case IIO_MAGN: + /* Magnetic resolution in uT */ + *val = 0; + *val2 = tmag5273_scale[data->version] + [data->scale_index].micro; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_ANGL: + /* + * Angle is in degrees and has four fractional bits, + * therefore use 1/16 * pi/180 to convert to radians. + */ + *val = 1000; + *val2 = 916732; + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + switch (chan->type) { + case IIO_TEMP: + *val = -16005; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = data->conv_avg; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int tmag5273_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct tmag5273_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + return tmag5273_write_osr(data, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_MAGN: + if (val) + return -EINVAL; + return tmag5273_write_scale(data, val2); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +#define TMAG5273_AXIS_CHANNEL(axis, index) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_type_available = \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ + } + +static const struct iio_chan_spec tmag5273_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .address = TEMPERATURE, + .scan_index = TEMPERATURE, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + TMAG5273_AXIS_CHANNEL(X, AXIS_X), + TMAG5273_AXIS_CHANNEL(Y, AXIS_Y), + TMAG5273_AXIS_CHANNEL(Z, AXIS_Z), + { + .type = IIO_ANGL, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .address = ANGLE, + .scan_index = ANGLE, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_DISTANCE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_all = + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .address = MAGNITUDE, + .scan_index = MAGNITUDE, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(6), +}; + +static const struct iio_info tmag5273_info = { + .read_avail = tmag5273_read_avail, + .read_raw = tmag5273_read_raw, + .write_raw = tmag5273_write_raw, +}; + +static bool tmag5273_volatile_reg(struct device *dev, unsigned int reg) +{ + return reg >= TMAG5273_T_MSB_RESULT && reg <= TMAG5273_MAGNITUDE_RESULT; +} + +static const struct regmap_config tmag5273_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TMAG5273_MAX_REG, + .volatile_reg = tmag5273_volatile_reg, +}; + +static int tmag5273_set_operating_mode(struct tmag5273_data *data, + unsigned int val) +{ + return regmap_write(data->map, TMAG5273_DEVICE_CONFIG_2, val); +} + +static void tmag5273_read_device_property(struct tmag5273_data *data) +{ + struct device *dev = data->dev; + const char *str; + int ret; + + data->angle_measurement = TMAG5273_ANGLE_EN_X_Y; + + ret = device_property_read_string(dev, "ti,angle-measurement", &str); + if (ret) + return; + + ret = match_string(tmag5273_angle_names, + ARRAY_SIZE(tmag5273_angle_names), str); + if (ret >= 0) + data->angle_measurement = ret; +} + +static void tmag5273_wake_up(struct tmag5273_data *data) +{ + int val; + + /* Wake up the chip by sending a dummy I2C command */ + regmap_read(data->map, TMAG5273_DEVICE_ID, &val); + /* + * Time to go to stand-by mode from sleep mode is 50us + * typically, during this time no I2C access is possible. + */ + usleep_range(80, 200); +} + +static int tmag5273_chip_init(struct tmag5273_data *data) +{ + int ret; + + ret = regmap_write(data->map, TMAG5273_DEVICE_CONFIG_1, + TMAG5273_AVG_32_MODE); + if (ret) + return ret; + data->conv_avg = 32; + + ret = regmap_write(data->map, TMAG5273_DEVICE_CONFIG_2, + TMAG5273_OP_MODE_CONT); + if (ret) + return ret; + + ret = regmap_write(data->map, TMAG5273_SENSOR_CONFIG_1, + FIELD_PREP(TMAG5273_MAG_CH_EN_MASK, + TMAG5273_MAG_CH_EN_X_Y_Z)); + if (ret) + return ret; + + ret = regmap_write(data->map, TMAG5273_SENSOR_CONFIG_2, + FIELD_PREP(TMAG5273_ANGLE_EN_MASK, + data->angle_measurement)); + if (ret) + return ret; + data->scale_index = MAGN_RANGE_LOW; + + return regmap_write(data->map, TMAG5273_T_CONFIG, TMAG5273_T_CH_EN); +} + +static int tmag5273_check_device_id(struct tmag5273_data *data) +{ + __le16 devid; + int val, ret; + + ret = regmap_read(data->map, TMAG5273_DEVICE_ID, &val); + if (ret) + return dev_err_probe(data->dev, ret, "failed to power on device\n"); + data->version = FIELD_PREP(TMAG5273_VERSION_MASK, val); + + ret = regmap_bulk_read(data->map, TMAG5273_MANUFACTURER_ID_LSB, &devid, + sizeof(devid)); + if (ret) + return dev_err_probe(data->dev, ret, "failed to read device ID\n"); + data->devid = le16_to_cpu(devid); + + switch (data->devid) { + case TMAG5273_MANUFACTURER_ID: + /* + * The device name matches the orderable part number. 'x' stands + * for A, B, C or D devices, which have different I2C addresses. + * Versions 1 or 2 (0 and 3 is reserved) stands for different + * magnetic strengths. + */ + snprintf(data->name, sizeof(data->name), "tmag5273x%1u", data->version); + if (data->version < 1 || data->version > 2) + dev_warn(data->dev, "Unsupported device %s\n", data->name); + return 0; + default: + /* + * Only print warning in case of unknown device ID to allow + * fallback compatible in device tree. + */ + dev_warn(data->dev, "Unknown device ID 0x%x\n", data->devid); + return 0; + } +} + +static void tmag5273_power_down(void *data) +{ + tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_SLEEP); +} + +static int tmag5273_probe(struct i2c_client *i2c) +{ + struct device *dev = &i2c->dev; + struct tmag5273_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->dev = dev; + i2c_set_clientdata(i2c, indio_dev); + + data->map = devm_regmap_init_i2c(i2c, &tmag5273_regmap_config); + if (IS_ERR(data->map)) + return dev_err_probe(dev, PTR_ERR(data->map), + "failed to allocate register map\n"); + + mutex_init(&data->lock); + + ret = devm_regulator_get_enable(dev, "vcc"); + if (ret) + return dev_err_probe(dev, ret, "failed to enable regulator\n"); + + tmag5273_wake_up(data); + + ret = tmag5273_check_device_id(data); + if (ret) + return ret; + + ret = tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_CONT); + if (ret) + return dev_err_probe(dev, ret, "failed to power on device\n"); + + /* + * Register powerdown deferred callback which suspends the chip + * after module unloaded. + * + * TMAG5273 should be in SUSPEND mode in the two cases: + * 1) When driver is loaded, but we do not have any data or + * configuration requests to it (we are solving it using + * autosuspend feature). + * 2) When driver is unloaded and device is not used (devm action is + * used in this case). + */ + ret = devm_add_action_or_reset(dev, tmag5273_power_down, data); + if (ret) + return dev_err_probe(dev, ret, "failed to add powerdown action\n"); + + ret = pm_runtime_set_active(dev); + if (ret < 0) + return ret; + + ret = devm_pm_runtime_enable(dev); + if (ret) + return ret; + + pm_runtime_get_noresume(dev); + pm_runtime_set_autosuspend_delay(dev, TMAG5273_AUTOSLEEP_DELAY_MS); + pm_runtime_use_autosuspend(dev); + + tmag5273_read_device_property(data); + + ret = tmag5273_chip_init(data); + if (ret) + return dev_err_probe(dev, ret, "failed to init device\n"); + + indio_dev->info = &tmag5273_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = data->name; + indio_dev->channels = tmag5273_channels; + indio_dev->num_channels = ARRAY_SIZE(tmag5273_channels); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + ret = devm_iio_device_register(dev, indio_dev); + if (ret) + return dev_err_probe(dev, ret, "device register failed\n"); + + return 0; +} + +static int tmag5273_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tmag5273_data *data = iio_priv(indio_dev); + int ret; + + ret = tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_SLEEP); + if (ret) + dev_err(dev, "failed to power off device (%pe)\n", ERR_PTR(ret)); + + return ret; +} + +static int tmag5273_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tmag5273_data *data = iio_priv(indio_dev); + int ret; + + tmag5273_wake_up(data); + + ret = tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_CONT); + if (ret) + dev_err(dev, "failed to power on device (%pe)\n", ERR_PTR(ret)); + + return ret; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(tmag5273_pm_ops, + tmag5273_runtime_suspend, tmag5273_runtime_resume, + NULL); + +static const struct i2c_device_id tmag5273_id[] = { + { "tmag5273" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, tmag5273_id); + +static const struct of_device_id tmag5273_of_match[] = { + { .compatible = "ti,tmag5273" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, tmag5273_of_match); + +static struct i2c_driver tmag5273_driver = { + .driver = { + .name = "tmag5273", + .of_match_table = tmag5273_of_match, + .pm = pm_ptr(&tmag5273_pm_ops), + }, + .probe = tmag5273_probe, + .id_table = tmag5273_id, +}; +module_i2c_driver(tmag5273_driver); + +MODULE_DESCRIPTION("TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor driver"); +MODULE_AUTHOR("Gerald Loacker <gerald.loacker@wolfvision.net>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c new file mode 100644 index 0000000000..c5e485bfc6 --- /dev/null +++ b/drivers/iio/magnetometer/yamaha-yas530.c @@ -0,0 +1,1616 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for the Yamaha YAS magnetic sensors, often used in Samsung + * mobile phones. While all are not yet handled because of lacking + * hardware, expand this driver to handle the different variants: + * + * YAS530 MS-3E (2011 Samsung Galaxy S Advance) + * YAS532 MS-3R (2011 Samsung Galaxy S4) + * YAS533 MS-3F (Vivo 1633, 1707, V3, Y21L) + * (YAS534 is a magnetic switch, not handled) + * YAS535 MS-6C + * YAS536 MS-3W + * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Galaxy S7) + * YAS539 MS-3S (2018 Samsung Galaxy A7 SM-A750FN) + * + * Code functions found in the MPU3050 YAS530 and YAS532 drivers + * named "inv_compass" in the Tegra Android kernel tree. + * Copyright (C) 2012 InvenSense Corporation + * + * Code functions for YAS537 based on Yamaha Android kernel driver. + * Copyright (c) 2014 Yamaha Corporation + * + * Author: Linus Walleij <linus.walleij@linaro.org> + */ +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mutex.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/random.h> +#include <linux/units.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include <asm/unaligned.h> + +/* Commonly used registers */ +#define YAS5XX_DEVICE_ID 0x80 +#define YAS5XX_MEASURE_DATA 0xB0 + +/* These registers are used by YAS530, YAS532 and YAS533 */ +#define YAS530_ACTUATE_INIT_COIL 0x81 +#define YAS530_MEASURE 0x82 +#define YAS530_CONFIG 0x83 +#define YAS530_MEASURE_INTERVAL 0x84 +#define YAS530_OFFSET_X 0x85 /* [-31 .. 31] */ +#define YAS530_OFFSET_Y1 0x86 /* [-31 .. 31] */ +#define YAS530_OFFSET_Y2 0x87 /* [-31 .. 31] */ +#define YAS530_TEST1 0x88 +#define YAS530_TEST2 0x89 +#define YAS530_CAL 0x90 + +/* Registers used by YAS537 */ +#define YAS537_MEASURE 0x81 /* Originally YAS537_REG_CMDR */ +#define YAS537_CONFIG 0x82 /* Originally YAS537_REG_CONFR */ +#define YAS537_MEASURE_INTERVAL 0x83 /* Originally YAS537_REG_INTRVLR */ +#define YAS537_OFFSET_X 0x84 /* Originally YAS537_REG_OXR */ +#define YAS537_OFFSET_Y1 0x85 /* Originally YAS537_REG_OY1R */ +#define YAS537_OFFSET_Y2 0x86 /* Originally YAS537_REG_OY2R */ +#define YAS537_AVR 0x87 +#define YAS537_HCK 0x88 +#define YAS537_LCK 0x89 +#define YAS537_SRST 0x90 +#define YAS537_ADCCAL 0x91 +#define YAS537_MTC 0x93 +#define YAS537_OC 0x9E +#define YAS537_TRM 0x9F +#define YAS537_CAL 0xC0 + +/* Bits in the YAS5xx config register */ +#define YAS5XX_CONFIG_INTON BIT(0) /* Interrupt on? */ +#define YAS5XX_CONFIG_INTHACT BIT(1) /* Interrupt active high? */ +#define YAS5XX_CONFIG_CCK_MASK GENMASK(4, 2) +#define YAS5XX_CONFIG_CCK_SHIFT 2 + +/* Bits in the measure command register */ +#define YAS5XX_MEASURE_START BIT(0) +#define YAS5XX_MEASURE_LDTC BIT(1) +#define YAS5XX_MEASURE_FORS BIT(2) +#define YAS5XX_MEASURE_DLYMES BIT(4) +#define YAS5XX_MEASURE_CONT BIT(5) + +/* Bits in the measure data register */ +#define YAS5XX_MEASURE_DATA_BUSY BIT(7) + +#define YAS530_DEVICE_ID 0x01 /* YAS530 (MS-3E) */ +#define YAS530_VERSION_A 0 /* YAS530 (MS-3E A) */ +#define YAS530_VERSION_B 1 /* YAS530B (MS-3E B) */ +#define YAS530_VERSION_A_COEF 380 +#define YAS530_VERSION_B_COEF 550 +#define YAS530_DATA_BITS 12 +#define YAS530_DATA_CENTER BIT(YAS530_DATA_BITS - 1) +#define YAS530_DATA_OVERFLOW (BIT(YAS530_DATA_BITS) - 1) + +#define YAS532_DEVICE_ID 0x02 /* YAS532/YAS533 (MS-3R/F) */ +#define YAS532_VERSION_AB 0 /* YAS532/533 AB (MS-3R/F AB) */ +#define YAS532_VERSION_AC 1 /* YAS532/533 AC (MS-3R/F AC) */ +#define YAS532_VERSION_AB_COEF 1800 +#define YAS532_VERSION_AC_COEF_X 850 +#define YAS532_VERSION_AC_COEF_Y1 750 +#define YAS532_VERSION_AC_COEF_Y2 750 +#define YAS532_DATA_BITS 13 +#define YAS532_DATA_CENTER BIT(YAS532_DATA_BITS - 1) +#define YAS532_DATA_OVERFLOW (BIT(YAS532_DATA_BITS) - 1) + +#define YAS537_DEVICE_ID 0x07 /* YAS537 (MS-3T) */ +#define YAS537_VERSION_0 0 /* Version naming unknown */ +#define YAS537_VERSION_1 1 /* Version naming unknown */ +#define YAS537_MAG_AVERAGE_32_MASK GENMASK(6, 4) +#define YAS537_MEASURE_TIME_WORST_US 1500 +#define YAS537_DEFAULT_SENSOR_DELAY_MS 50 +#define YAS537_MAG_RCOIL_TIME_US 65 +#define YAS537_MTC3_MASK_PREP GENMASK(7, 0) +#define YAS537_MTC3_MASK_GET GENMASK(7, 5) +#define YAS537_MTC3_ADD_BIT BIT(4) +#define YAS537_HCK_MASK_PREP GENMASK(4, 0) +#define YAS537_HCK_MASK_GET GENMASK(7, 4) +#define YAS537_LCK_MASK_PREP GENMASK(4, 0) +#define YAS537_LCK_MASK_GET GENMASK(3, 0) +#define YAS537_OC_MASK_GET GENMASK(5, 0) + +/* Turn off device regulators etc after 5 seconds of inactivity */ +#define YAS5XX_AUTOSUSPEND_DELAY_MS 5000 + +enum chip_ids { + yas530, + yas532, + yas533, + yas537, +}; + +static const int yas530_volatile_reg[] = { + YAS530_ACTUATE_INIT_COIL, + YAS530_MEASURE, +}; + +static const int yas537_volatile_reg[] = { + YAS537_MEASURE, +}; + +struct yas5xx_calibration { + /* Linearization calibration x, y1, y2 */ + s32 r[3]; + u32 f[3]; + /* Temperature compensation calibration */ + s16 Cx, Cy1, Cy2; + /* Misc calibration coefficients */ + s8 a2, a3, a4, a6, a7, a8; + s16 a5, a9; + u8 k; + /* clock divider */ + u8 dck; +}; + +struct yas5xx; + +/** + * struct yas5xx_chip_info - device-specific data and function pointers + * @devid: device ID number + * @product_name: product name of the YAS variant + * @version_names: version letters or namings + * @volatile_reg: device-specific volatile registers + * @volatile_reg_qty: quantity of device-specific volatile registers + * @scaling_val2: scaling value for IIO_CHAN_INFO_SCALE + * @t_ref: number of counts at reference temperature 20 °C + * @min_temp_x10: starting point of temperature counting in 1/10:s degrees Celsius + * @get_measure: function pointer to get a measurement + * @get_calibration_data: function pointer to get calibration data + * @dump_calibration: function pointer to dump calibration for debugging + * @measure_offsets: function pointer to measure the offsets + * @power_on: function pointer to power-on procedure + * + * The "t_ref" value for YAS532/533 is known from the Android driver. + * For YAS530 and YAS537 it was approximately measured. + * + * The temperatures "min_temp_x10" are derived from the temperature resolutions + * given in the data sheets. + */ +struct yas5xx_chip_info { + unsigned int devid; + const char *product_name; + const char *version_names[2]; + const int *volatile_reg; + int volatile_reg_qty; + u32 scaling_val2; + u16 t_ref; + s16 min_temp_x10; + int (*get_measure)(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo); + int (*get_calibration_data)(struct yas5xx *yas5xx); + void (*dump_calibration)(struct yas5xx *yas5xx); + int (*measure_offsets)(struct yas5xx *yas5xx); + int (*power_on)(struct yas5xx *yas5xx); +}; + +/** + * struct yas5xx - state container for the YAS5xx driver + * @dev: parent device pointer + * @chip_info: device-specific data and function pointers + * @version: device version + * @calibration: calibration settings from the OTP storage + * @hard_offsets: offsets for each axis measured with initcoil actuated + * @orientation: mounting matrix, flipped axis etc + * @map: regmap to access the YAX5xx registers over I2C + * @regs: the vdd and vddio power regulators + * @reset: optional GPIO line used for handling RESET + * @lock: locks the magnetometer for exclusive use during a measurement (which + * involves several register transactions so the regmap lock is not enough) + * so that measurements get serialized in a first-come-first serve manner + * @scan: naturally aligned measurements + */ +struct yas5xx { + struct device *dev; + const struct yas5xx_chip_info *chip_info; + unsigned int version; + struct yas5xx_calibration calibration; + s8 hard_offsets[3]; + struct iio_mount_matrix orientation; + struct regmap *map; + struct regulator_bulk_data regs[2]; + struct gpio_desc *reset; + struct mutex lock; + /* + * The scanout is 4 x 32 bits in CPU endianness. + * Ensure timestamp is naturally aligned + */ + struct { + s32 channels[4]; + s64 ts __aligned(8); + } scan; +}; + +/* On YAS530 the x, y1 and y2 values are 12 bits */ +static u16 yas530_extract_axis(u8 *data) +{ + u16 val; + + /* + * These are the bits used in a 16bit word: + * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + * x x x x x x x x x x x x + */ + val = get_unaligned_be16(&data[0]); + val = FIELD_GET(GENMASK(14, 3), val); + return val; +} + +/* On YAS532 the x, y1 and y2 values are 13 bits */ +static u16 yas532_extract_axis(u8 *data) +{ + u16 val; + + /* + * These are the bits used in a 16bit word: + * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + * x x x x x x x x x x x x x + */ + val = get_unaligned_be16(&data[0]); + val = FIELD_GET(GENMASK(14, 2), val); + return val; +} + +/** + * yas530_measure() - Make a measure from the hardware + * @yas5xx: The device state + * @t: the raw temperature measurement + * @x: the raw x axis measurement + * @y1: the y1 axis measurement + * @y2: the y2 axis measurement + * @return: 0 on success or error code + * + * Used by YAS530, YAS532 and YAS533. + */ +static int yas530_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2) +{ + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + unsigned int busy; + u8 data[8]; + int ret; + u16 val; + + mutex_lock(&yas5xx->lock); + ret = regmap_write(yas5xx->map, YAS530_MEASURE, YAS5XX_MEASURE_START); + if (ret < 0) + goto out_unlock; + + /* + * Typical time to measure 1500 us, max 2000 us so wait min 500 us + * and at most 20000 us (one magnitude more than the datsheet max) + * before timeout. + */ + ret = regmap_read_poll_timeout(yas5xx->map, YAS5XX_MEASURE_DATA, busy, + !(busy & YAS5XX_MEASURE_DATA_BUSY), + 500, 20000); + if (ret) { + dev_err(yas5xx->dev, "timeout waiting for measurement\n"); + goto out_unlock; + } + + ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA, + data, sizeof(data)); + if (ret) + goto out_unlock; + + mutex_unlock(&yas5xx->lock); + + switch (ci->devid) { + case YAS530_DEVICE_ID: + /* + * The t value is 9 bits in big endian format + * These are the bits used in a 16bit word: + * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + * x x x x x x x x x + */ + val = get_unaligned_be16(&data[0]); + val = FIELD_GET(GENMASK(14, 6), val); + *t = val; + *x = yas530_extract_axis(&data[2]); + *y1 = yas530_extract_axis(&data[4]); + *y2 = yas530_extract_axis(&data[6]); + break; + case YAS532_DEVICE_ID: + /* + * The t value is 10 bits in big endian format + * These are the bits used in a 16bit word: + * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + * x x x x x x x x x x + */ + val = get_unaligned_be16(&data[0]); + val = FIELD_GET(GENMASK(14, 5), val); + *t = val; + *x = yas532_extract_axis(&data[2]); + *y1 = yas532_extract_axis(&data[4]); + *y2 = yas532_extract_axis(&data[6]); + break; + default: + dev_err(yas5xx->dev, "unknown data format\n"); + ret = -EINVAL; + break; + } + + return ret; + +out_unlock: + mutex_unlock(&yas5xx->lock); + return ret; +} + +/** + * yas537_measure() - Make a measure from the hardware + * @yas5xx: The device state + * @t: the raw temperature measurement + * @x: the raw x axis measurement + * @y1: the y1 axis measurement + * @y2: the y2 axis measurement + * @return: 0 on success or error code + */ +static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + unsigned int busy; + u8 data[8]; + u16 xy1y2[3]; + s32 h[3], s[3]; + int i, ret; + + mutex_lock(&yas5xx->lock); + + /* Contrary to YAS530/532, also a "cont" bit is set, meaning unknown */ + ret = regmap_write(yas5xx->map, YAS537_MEASURE, YAS5XX_MEASURE_START | + YAS5XX_MEASURE_CONT); + if (ret < 0) + goto out_unlock; + + /* Use same timeout like YAS530/532 but the bit is in data row 2 */ + ret = regmap_read_poll_timeout(yas5xx->map, YAS5XX_MEASURE_DATA + 2, busy, + !(busy & YAS5XX_MEASURE_DATA_BUSY), + 500, 20000); + if (ret) { + dev_err(yas5xx->dev, "timeout waiting for measurement\n"); + goto out_unlock; + } + + ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA, + data, sizeof(data)); + if (ret) + goto out_unlock; + + mutex_unlock(&yas5xx->lock); + + *t = get_unaligned_be16(&data[0]); + xy1y2[0] = FIELD_GET(GENMASK(13, 0), get_unaligned_be16(&data[2])); + xy1y2[1] = get_unaligned_be16(&data[4]); + xy1y2[2] = get_unaligned_be16(&data[6]); + + /* The second version of YAS537 needs to include calibration coefficients */ + if (yas5xx->version == YAS537_VERSION_1) { + for (i = 0; i < 3; i++) + s[i] = xy1y2[i] - BIT(13); + h[0] = (c->k * (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13); + h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13); + h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13); + for (i = 0; i < 3; i++) { + clamp_val(h[i], -BIT(13), BIT(13) - 1); + xy1y2[i] = h[i] + BIT(13); + } + } + + *x = xy1y2[0]; + *y1 = xy1y2[1]; + *y2 = xy1y2[2]; + + return 0; + +out_unlock: + mutex_unlock(&yas5xx->lock); + return ret; +} + +/* Used by YAS530, YAS532 and YAS533 */ +static s32 yas530_linearize(struct yas5xx *yas5xx, u16 val, int axis) +{ + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + struct yas5xx_calibration *c = &yas5xx->calibration; + static const s32 yas532ac_coef[] = { + YAS532_VERSION_AC_COEF_X, + YAS532_VERSION_AC_COEF_Y1, + YAS532_VERSION_AC_COEF_Y2, + }; + s32 coef; + + /* Select coefficients */ + switch (ci->devid) { + case YAS530_DEVICE_ID: + if (yas5xx->version == YAS530_VERSION_A) + coef = YAS530_VERSION_A_COEF; + else + coef = YAS530_VERSION_B_COEF; + break; + case YAS532_DEVICE_ID: + if (yas5xx->version == YAS532_VERSION_AB) + coef = YAS532_VERSION_AB_COEF; + else + /* Elaborate coefficients */ + coef = yas532ac_coef[axis]; + break; + default: + dev_err(yas5xx->dev, "unknown device type\n"); + return val; + } + /* + * Linearization formula: + * + * x' = x - (3721 + 50 * f) + (xoffset - r) * c + * + * Where f and r are calibration values, c is a per-device + * and sometimes per-axis coefficient. + */ + return val - (3721 + 50 * c->f[axis]) + + (yas5xx->hard_offsets[axis] - c->r[axis]) * coef; +} + +static s32 yas5xx_calc_temperature(struct yas5xx *yas5xx, u16 t) +{ + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + s32 to; + u16 t_ref; + s16 min_temp_x10; + int ref_temp_x10; + + t_ref = ci->t_ref; + min_temp_x10 = ci->min_temp_x10; + ref_temp_x10 = 200; + + to = (min_temp_x10 + ((ref_temp_x10 - min_temp_x10) * t / t_ref)) * 100; + return to; +} + +/** + * yas530_get_measure() - Measure a sample of all axis and process + * @yas5xx: The device state + * @to: Temperature out + * @xo: X axis out + * @yo: Y axis out + * @zo: Z axis out + * @return: 0 on success or error code + * + * Used by YAS530, YAS532 and YAS533. + */ +static int yas530_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo) +{ + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + struct yas5xx_calibration *c = &yas5xx->calibration; + u16 t_ref, t_comp, t, x, y1, y2; + /* These are signed x, signed y1 etc */ + s32 sx, sy1, sy2, sy, sz; + int ret; + + /* We first get raw data that needs to be translated to [x,y,z] */ + ret = yas530_measure(yas5xx, &t, &x, &y1, &y2); + if (ret) + return ret; + + /* Do some linearization if available */ + sx = yas530_linearize(yas5xx, x, 0); + sy1 = yas530_linearize(yas5xx, y1, 1); + sy2 = yas530_linearize(yas5xx, y2, 2); + + /* + * Set the temperature for compensation (unit: counts): + * YAS532/YAS533 version AC uses the temperature deviation as a + * multiplier. YAS530 and YAS532 version AB use solely the t value. + */ + t_ref = ci->t_ref; + if (ci->devid == YAS532_DEVICE_ID && + yas5xx->version == YAS532_VERSION_AC) { + t_comp = t - t_ref; + } else { + t_comp = t; + } + + /* + * Temperature compensation for x, y1, y2 respectively: + * + * Cx * t_comp + * x' = x - ----------- + * 100 + */ + sx = sx - (c->Cx * t_comp) / 100; + sy1 = sy1 - (c->Cy1 * t_comp) / 100; + sy2 = sy2 - (c->Cy2 * t_comp) / 100; + + /* + * Break y1 and y2 into y and z, y1 and y2 are apparently encoding + * y and z. + */ + sy = sy1 - sy2; + sz = -sy1 - sy2; + + /* Calculate temperature readout */ + *to = yas5xx_calc_temperature(yas5xx, t); + + /* + * Calibrate [x,y,z] with some formulas like this: + * + * 100 * x + a_2 * y + a_3 * z + * x' = k * --------------------------- + * 10 + * + * a_4 * x + a_5 * y + a_6 * z + * y' = k * --------------------------- + * 10 + * + * a_7 * x + a_8 * y + a_9 * z + * z' = k * --------------------------- + * 10 + */ + *xo = c->k * ((100 * sx + c->a2 * sy + c->a3 * sz) / 10); + *yo = c->k * ((c->a4 * sx + c->a5 * sy + c->a6 * sz) / 10); + *zo = c->k * ((c->a7 * sx + c->a8 * sy + c->a9 * sz) / 10); + + return 0; +} + +/** + * yas537_get_measure() - Measure a sample of all axis and process + * @yas5xx: The device state + * @to: Temperature out + * @xo: X axis out + * @yo: Y axis out + * @zo: Z axis out + * @return: 0 on success or error code + */ +static int yas537_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo) +{ + u16 t, x, y1, y2; + int ret; + + /* We first get raw data that needs to be translated to [x,y,z] */ + ret = yas537_measure(yas5xx, &t, &x, &y1, &y2); + if (ret) + return ret; + + /* Calculate temperature readout */ + *to = yas5xx_calc_temperature(yas5xx, t); + + /* + * Unfortunately, no linearization or temperature compensation formulas + * are known for YAS537. + */ + + /* Calculate x, y, z from x, y1, y2 */ + *xo = (x - BIT(13)) * 300; + *yo = (y1 - y2) * 1732 / 10; + *zo = (-y1 - y2 + BIT(14)) * 300; + + return 0; +} + +static int yas5xx_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + s32 t, x, y, z; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + case IIO_CHAN_INFO_RAW: + pm_runtime_get_sync(yas5xx->dev); + ret = ci->get_measure(yas5xx, &t, &x, &y, &z); + pm_runtime_mark_last_busy(yas5xx->dev); + pm_runtime_put_autosuspend(yas5xx->dev); + if (ret) + return ret; + switch (chan->address) { + case 0: + *val = t; + break; + case 1: + *val = x; + break; + case 2: + *val = y; + break; + case 3: + *val = z; + break; + default: + dev_err(yas5xx->dev, "unknown channel\n"); + return -EINVAL; + } + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 1; + *val2 = ci->scaling_val2; + return IIO_VAL_FRACTIONAL; + default: + /* Unknown request */ + return -EINVAL; + } +} + +static void yas5xx_fill_buffer(struct iio_dev *indio_dev) +{ + struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + s32 t, x, y, z; + int ret; + + pm_runtime_get_sync(yas5xx->dev); + ret = ci->get_measure(yas5xx, &t, &x, &y, &z); + pm_runtime_mark_last_busy(yas5xx->dev); + pm_runtime_put_autosuspend(yas5xx->dev); + if (ret) { + dev_err(yas5xx->dev, "error refilling buffer\n"); + return; + } + yas5xx->scan.channels[0] = t; + yas5xx->scan.channels[1] = x; + yas5xx->scan.channels[2] = y; + yas5xx->scan.channels[3] = z; + iio_push_to_buffers_with_timestamp(indio_dev, &yas5xx->scan, + iio_get_time_ns(indio_dev)); +} + +static irqreturn_t yas5xx_handle_trigger(int irq, void *p) +{ + const struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + + yas5xx_fill_buffer(indio_dev); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + + +static const struct iio_mount_matrix * +yas5xx_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct yas5xx *yas5xx = iio_priv(indio_dev); + + return &yas5xx->orientation; +} + +static const struct iio_chan_spec_ext_info yas5xx_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, yas5xx_get_mount_matrix), + { } +}; + +#define YAS5XX_AXIS_CHANNEL(axis, index) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = yas5xx_ext_info, \ + .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 32, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ + } + +static const struct iio_chan_spec yas5xx_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = 0, + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + YAS5XX_AXIS_CHANNEL(X, 1), + YAS5XX_AXIS_CHANNEL(Y, 2), + YAS5XX_AXIS_CHANNEL(Z, 3), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static const unsigned long yas5xx_scan_masks[] = { GENMASK(3, 0), 0 }; + +static const struct iio_info yas5xx_info = { + .read_raw = &yas5xx_read_raw, +}; + +static bool yas5xx_volatile_reg(struct device *dev, unsigned int reg) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + int reg_qty; + int i; + + if (reg >= YAS5XX_MEASURE_DATA && reg < YAS5XX_MEASURE_DATA + 8) + return true; + + /* + * YAS versions share different registers on the same address, + * need to differentiate. + */ + reg_qty = ci->volatile_reg_qty; + for (i = 0; i < reg_qty; i++) { + if (reg == ci->volatile_reg[i]) + return true; + } + + return false; +} + +/* TODO: enable regmap cache, using mark dirty and sync at runtime resume */ +static const struct regmap_config yas5xx_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xff, + .volatile_reg = yas5xx_volatile_reg, +}; + +/** + * yas530_extract_calibration() - extracts the a2-a9 and k calibration + * @data: the bitfield to use + * @c: the calibration to populate + * + * Used by YAS530, YAS532 and YAS533. + */ +static void yas530_extract_calibration(u8 *data, struct yas5xx_calibration *c) +{ + u64 val = get_unaligned_be64(data); + + /* + * Bitfield layout for the axis calibration data, for factor + * a2 = 2 etc, k = k, c = clock divider + * + * n 7 6 5 4 3 2 1 0 + * 0 [ 2 2 2 2 2 2 3 3 ] bits 63 .. 56 + * 1 [ 3 3 4 4 4 4 4 4 ] bits 55 .. 48 + * 2 [ 5 5 5 5 5 5 6 6 ] bits 47 .. 40 + * 3 [ 6 6 6 6 7 7 7 7 ] bits 39 .. 32 + * 4 [ 7 7 7 8 8 8 8 8 ] bits 31 .. 24 + * 5 [ 8 9 9 9 9 9 9 9 ] bits 23 .. 16 + * 6 [ 9 k k k k k c c ] bits 15 .. 8 + * 7 [ c x x x x x x x ] bits 7 .. 0 + */ + c->a2 = FIELD_GET(GENMASK_ULL(63, 58), val) - 32; + c->a3 = FIELD_GET(GENMASK_ULL(57, 54), val) - 8; + c->a4 = FIELD_GET(GENMASK_ULL(53, 48), val) - 32; + c->a5 = FIELD_GET(GENMASK_ULL(47, 42), val) + 38; + c->a6 = FIELD_GET(GENMASK_ULL(41, 36), val) - 32; + c->a7 = FIELD_GET(GENMASK_ULL(35, 29), val) - 64; + c->a8 = FIELD_GET(GENMASK_ULL(28, 23), val) - 32; + c->a9 = FIELD_GET(GENMASK_ULL(22, 15), val); + c->k = FIELD_GET(GENMASK_ULL(14, 10), val) + 10; + c->dck = FIELD_GET(GENMASK_ULL(9, 7), val); +} + +static int yas530_get_calibration_data(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + u8 data[16]; + u32 val; + int ret; + + /* Dummy read, first read is ALWAYS wrong */ + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); + if (ret) + return ret; + + /* Actual calibration readout */ + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); + if (ret) + return ret; + dev_dbg(yas5xx->dev, "calibration data: %16ph\n", data); + + /* Contribute calibration data to the input pool for kernel entropy */ + add_device_randomness(data, sizeof(data)); + + /* Extract version */ + yas5xx->version = data[15] & GENMASK(1, 0); + + /* Extract the calibration from the bitfield */ + c->Cx = data[0] * 6 - 768; + c->Cy1 = data[1] * 6 - 768; + c->Cy2 = data[2] * 6 - 768; + yas530_extract_calibration(&data[3], c); + + /* + * Extract linearization: + * Linearization layout in the 32 bits at byte 11: + * The r factors are 6 bit values where bit 5 is the sign + * + * n 7 6 5 4 3 2 1 0 + * 0 [ xx xx xx r0 r0 r0 r0 r0 ] bits 31 .. 24 + * 1 [ r0 f0 f0 r1 r1 r1 r1 r1 ] bits 23 .. 16 + * 2 [ r1 f1 f1 r2 r2 r2 r2 r2 ] bits 15 .. 8 + * 3 [ r2 f2 f2 xx xx xx xx xx ] bits 7 .. 0 + */ + val = get_unaligned_be32(&data[11]); + c->f[0] = FIELD_GET(GENMASK(22, 21), val); + c->f[1] = FIELD_GET(GENMASK(14, 13), val); + c->f[2] = FIELD_GET(GENMASK(6, 5), val); + c->r[0] = sign_extend32(FIELD_GET(GENMASK(28, 23), val), 5); + c->r[1] = sign_extend32(FIELD_GET(GENMASK(20, 15), val), 5); + c->r[2] = sign_extend32(FIELD_GET(GENMASK(12, 7), val), 5); + + return 0; +} + +static int yas532_get_calibration_data(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + u8 data[14]; + u32 val; + int ret; + + /* Dummy read, first read is ALWAYS wrong */ + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); + if (ret) + return ret; + /* Actual calibration readout */ + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); + if (ret) + return ret; + dev_dbg(yas5xx->dev, "calibration data: %14ph\n", data); + + /* Sanity check, is this all zeroes? */ + if (!memchr_inv(data, 0x00, 13) && !(data[13] & BIT(7))) + dev_warn(yas5xx->dev, "calibration is blank!\n"); + + /* Contribute calibration data to the input pool for kernel entropy */ + add_device_randomness(data, sizeof(data)); + + /* Only one bit of version info reserved here as far as we know */ + yas5xx->version = data[13] & BIT(0); + + /* Extract calibration from the bitfield */ + c->Cx = data[0] * 10 - 1280; + c->Cy1 = data[1] * 10 - 1280; + c->Cy2 = data[2] * 10 - 1280; + yas530_extract_calibration(&data[3], c); + + /* + * Extract linearization: + * Linearization layout in the 32 bits at byte 10: + * The r factors are 6 bit values where bit 5 is the sign + * + * n 7 6 5 4 3 2 1 0 + * 0 [ xx r0 r0 r0 r0 r0 r0 f0 ] bits 31 .. 24 + * 1 [ f0 r1 r1 r1 r1 r1 r1 f1 ] bits 23 .. 16 + * 2 [ f1 r2 r2 r2 r2 r2 r2 f2 ] bits 15 .. 8 + * 3 [ f2 xx xx xx xx xx xx xx ] bits 7 .. 0 + */ + val = get_unaligned_be32(&data[10]); + c->f[0] = FIELD_GET(GENMASK(24, 23), val); + c->f[1] = FIELD_GET(GENMASK(16, 15), val); + c->f[2] = FIELD_GET(GENMASK(8, 7), val); + c->r[0] = sign_extend32(FIELD_GET(GENMASK(30, 25), val), 5); + c->r[1] = sign_extend32(FIELD_GET(GENMASK(22, 17), val), 5); + c->r[2] = sign_extend32(FIELD_GET(GENMASK(14, 7), val), 5); + + return 0; +} + +static int yas537_get_calibration_data(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + u8 data[17]; + u32 val1, val2, val3, val4; + int i, ret; + + /* Writing SRST register */ + ret = regmap_write(yas5xx->map, YAS537_SRST, BIT(1)); + if (ret) + return ret; + + /* Calibration readout, YAS537 needs one readout only */ + ret = regmap_bulk_read(yas5xx->map, YAS537_CAL, data, sizeof(data)); + if (ret) + return ret; + dev_dbg(yas5xx->dev, "calibration data: %17ph\n", data); + + /* Sanity check, is this all zeroes? */ + if (!memchr_inv(data, 0x00, 16) && !FIELD_GET(GENMASK(5, 0), data[16])) + dev_warn(yas5xx->dev, "calibration is blank!\n"); + + /* Contribute calibration data to the input pool for kernel entropy */ + add_device_randomness(data, sizeof(data)); + + /* Extract version information */ + yas5xx->version = FIELD_GET(GENMASK(7, 6), data[16]); + + /* There are two versions of YAS537 behaving differently */ + switch (yas5xx->version) { + case YAS537_VERSION_0: + /* + * The first version simply writes data back into registers: + * + * data[0] YAS537_MTC 0x93 + * data[1] 0x94 + * data[2] 0x95 + * data[3] 0x96 + * data[4] 0x97 + * data[5] 0x98 + * data[6] 0x99 + * data[7] 0x9a + * data[8] 0x9b + * data[9] 0x9c + * data[10] 0x9d + * data[11] YAS537_OC 0x9e + * + * data[12] YAS537_OFFSET_X 0x84 + * data[13] YAS537_OFFSET_Y1 0x85 + * data[14] YAS537_OFFSET_Y2 0x86 + * + * data[15] YAS537_HCK 0x88 + * data[16] YAS537_LCK 0x89 + */ + for (i = 0; i < 12; i++) { + ret = regmap_write(yas5xx->map, YAS537_MTC + i, + data[i]); + if (ret) + return ret; + } + for (i = 0; i < 3; i++) { + ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i, + data[i + 12]); + if (ret) + return ret; + yas5xx->hard_offsets[i] = data[i + 12]; + } + for (i = 0; i < 2; i++) { + ret = regmap_write(yas5xx->map, YAS537_HCK + i, + data[i + 15]); + if (ret) + return ret; + } + break; + case YAS537_VERSION_1: + /* + * The second version writes some data into registers but also + * extracts calibration coefficients. + * + * Registers being written: + * + * data[0] YAS537_MTC 0x93 + * data[1] YAS537_MTC+1 0x94 + * data[2] YAS537_MTC+2 0x95 + * data[3] YAS537_MTC+3 (partially) 0x96 + * + * data[12] YAS537_OFFSET_X 0x84 + * data[13] YAS537_OFFSET_Y1 0x85 + * data[14] YAS537_OFFSET_Y2 0x86 + * + * data[15] YAS537_HCK (partially) 0x88 + * YAS537_LCK (partially) 0x89 + * data[16] YAS537_OC (partially) 0x9e + */ + for (i = 0; i < 3; i++) { + ret = regmap_write(yas5xx->map, YAS537_MTC + i, + data[i]); + if (ret) + return ret; + } + for (i = 0; i < 3; i++) { + ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i, + data[i + 12]); + if (ret) + return ret; + yas5xx->hard_offsets[i] = data[i + 12]; + } + /* + * Visualization of partially taken data: + * + * data[3] n 7 6 5 4 3 2 1 0 + * YAS537_MTC+3 x x x 1 0 0 0 0 + * + * data[15] n 7 6 5 4 3 2 1 0 + * YAS537_HCK x x x x 0 + * + * data[15] n 7 6 5 4 3 2 1 0 + * YAS537_LCK x x x x 0 + * + * data[16] n 7 6 5 4 3 2 1 0 + * YAS537_OC x x x x x x + */ + ret = regmap_write(yas5xx->map, YAS537_MTC + 3, + FIELD_PREP(YAS537_MTC3_MASK_PREP, + FIELD_GET(YAS537_MTC3_MASK_GET, data[3])) | + YAS537_MTC3_ADD_BIT); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_HCK, + FIELD_PREP(YAS537_HCK_MASK_PREP, + FIELD_GET(YAS537_HCK_MASK_GET, data[15]))); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_LCK, + FIELD_PREP(YAS537_LCK_MASK_PREP, + FIELD_GET(YAS537_LCK_MASK_GET, data[15]))); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_OC, + FIELD_GET(YAS537_OC_MASK_GET, data[16])); + if (ret) + return ret; + /* + * For data extraction, build some blocks. Four 32-bit blocks + * look appropriate. + * + * n 7 6 5 4 3 2 1 0 + * data[0] 0 [ Cx Cx Cx Cx Cx Cx Cx Cx ] bits 31 .. 24 + * data[1] 1 [ Cx C1 C1 C1 C1 C1 C1 C1 ] bits 23 .. 16 + * data[2] 2 [ C1 C1 C2 C2 C2 C2 C2 C2 ] bits 15 .. 8 + * data[3] 3 [ C2 C2 C2 ] bits 7 .. 0 + * + * n 7 6 5 4 3 2 1 0 + * data[3] 0 [ a2 a2 a2 a2 a2 ] bits 31 .. 24 + * data[4] 1 [ a2 a2 a3 a3 a3 a3 a3 a3 ] bits 23 .. 16 + * data[5] 2 [ a3 a4 a4 a4 a4 a4 a4 a4 ] bits 15 .. 8 + * data[6] 3 [ a4 ] bits 7 .. 0 + * + * n 7 6 5 4 3 2 1 0 + * data[6] 0 [ a5 a5 a5 a5 a5 a5 a5 ] bits 31 .. 24 + * data[7] 1 [ a5 a5 a6 a6 a6 a6 a6 a6 ] bits 23 .. 16 + * data[8] 2 [ a6 a7 a7 a7 a7 a7 a7 a7 ] bits 15 .. 8 + * data[9] 3 [ a7 ] bits 7 .. 0 + * + * n 7 6 5 4 3 2 1 0 + * data[9] 0 [ a8 a8 a8 a8 a8 a8 a8 ] bits 31 .. 24 + * data[10] 1 [ a9 a9 a9 a9 a9 a9 a9 a9 ] bits 23 .. 16 + * data[11] 2 [ a9 k k k k k k k ] bits 15 .. 8 + * data[12] 3 [ ] bits 7 .. 0 + */ + val1 = get_unaligned_be32(&data[0]); + val2 = get_unaligned_be32(&data[3]); + val3 = get_unaligned_be32(&data[6]); + val4 = get_unaligned_be32(&data[9]); + /* Extract calibration coefficients and modify */ + c->Cx = FIELD_GET(GENMASK(31, 23), val1) - 256; + c->Cy1 = FIELD_GET(GENMASK(22, 14), val1) - 256; + c->Cy2 = FIELD_GET(GENMASK(13, 5), val1) - 256; + c->a2 = FIELD_GET(GENMASK(28, 22), val2) - 64; + c->a3 = FIELD_GET(GENMASK(21, 15), val2) - 64; + c->a4 = FIELD_GET(GENMASK(14, 7), val2) - 128; + c->a5 = FIELD_GET(GENMASK(30, 22), val3) - 112; + c->a6 = FIELD_GET(GENMASK(21, 15), val3) - 64; + c->a7 = FIELD_GET(GENMASK(14, 7), val3) - 128; + c->a8 = FIELD_GET(GENMASK(30, 24), val4) - 64; + c->a9 = FIELD_GET(GENMASK(23, 15), val4) - 112; + c->k = FIELD_GET(GENMASK(14, 8), val4); + break; + default: + dev_err(yas5xx->dev, "unknown version of YAS537\n"); + return -EINVAL; + } + + return 0; +} + +/* Used by YAS530, YAS532 and YAS533 */ +static void yas530_dump_calibration(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + + dev_dbg(yas5xx->dev, "f[] = [%d, %d, %d]\n", + c->f[0], c->f[1], c->f[2]); + dev_dbg(yas5xx->dev, "r[] = [%d, %d, %d]\n", + c->r[0], c->r[1], c->r[2]); + dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx); + dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1); + dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2); + dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2); + dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3); + dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4); + dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5); + dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6); + dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7); + dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8); + dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9); + dev_dbg(yas5xx->dev, "k = %d\n", c->k); + dev_dbg(yas5xx->dev, "dck = %d\n", c->dck); +} + +static void yas537_dump_calibration(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + + if (yas5xx->version == YAS537_VERSION_1) { + dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx); + dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1); + dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2); + dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2); + dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3); + dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4); + dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5); + dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6); + dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7); + dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8); + dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9); + dev_dbg(yas5xx->dev, "k = %d\n", c->k); + } +} + +/* Used by YAS530, YAS532 and YAS533 */ +static int yas530_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2) +{ + int ret; + + ret = regmap_write(yas5xx->map, YAS530_OFFSET_X, ox); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS530_OFFSET_Y1, oy1); + if (ret) + return ret; + return regmap_write(yas5xx->map, YAS530_OFFSET_Y2, oy2); +} + +/* Used by YAS530, YAS532 and YAS533 */ +static s8 yas530_adjust_offset(s8 old, int bit, u16 center, u16 measure) +{ + if (measure > center) + return old + BIT(bit); + if (measure < center) + return old - BIT(bit); + return old; +} + +/* Used by YAS530, YAS532 and YAS533 */ +static int yas530_measure_offsets(struct yas5xx *yas5xx) +{ + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + int ret; + u16 center; + u16 t, x, y1, y2; + s8 ox, oy1, oy2; + int i; + + /* Actuate the init coil and measure offsets */ + ret = regmap_write(yas5xx->map, YAS530_ACTUATE_INIT_COIL, 0); + if (ret) + return ret; + + /* When the initcoil is active this should be around the center */ + switch (ci->devid) { + case YAS530_DEVICE_ID: + center = YAS530_DATA_CENTER; + break; + case YAS532_DEVICE_ID: + center = YAS532_DATA_CENTER; + break; + default: + dev_err(yas5xx->dev, "unknown device type\n"); + return -EINVAL; + } + + /* + * We set offsets in the interval +-31 by iterating + * +-16, +-8, +-4, +-2, +-1 adjusting the offsets each + * time, then writing the final offsets into the + * registers. + * + * NOTE: these offsets are NOT in the same unit or magnitude + * as the values for [x, y1, y2]. The value is +/-31 + * but the effect on the raw values is much larger. + * The effect of the offset is to bring the measure + * rougly to the center. + */ + ox = 0; + oy1 = 0; + oy2 = 0; + + for (i = 4; i >= 0; i--) { + ret = yas530_set_offsets(yas5xx, ox, oy1, oy2); + if (ret) + return ret; + + ret = yas530_measure(yas5xx, &t, &x, &y1, &y2); + if (ret) + return ret; + dev_dbg(yas5xx->dev, "measurement %d: x=%d, y1=%d, y2=%d\n", + 5-i, x, y1, y2); + + ox = yas530_adjust_offset(ox, i, center, x); + oy1 = yas530_adjust_offset(oy1, i, center, y1); + oy2 = yas530_adjust_offset(oy2, i, center, y2); + } + + /* Needed for calibration algorithm */ + yas5xx->hard_offsets[0] = ox; + yas5xx->hard_offsets[1] = oy1; + yas5xx->hard_offsets[2] = oy2; + ret = yas530_set_offsets(yas5xx, ox, oy1, oy2); + if (ret) + return ret; + + dev_info(yas5xx->dev, "discovered hard offsets: x=%d, y1=%d, y2=%d\n", + ox, oy1, oy2); + return 0; +} + +/* Used by YAS530, YAS532 and YAS533 */ +static int yas530_power_on(struct yas5xx *yas5xx) +{ + unsigned int val; + int ret; + + /* Zero the test registers */ + ret = regmap_write(yas5xx->map, YAS530_TEST1, 0); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS530_TEST2, 0); + if (ret) + return ret; + + /* Set up for no interrupts, calibrated clock divider */ + val = FIELD_PREP(YAS5XX_CONFIG_CCK_MASK, yas5xx->calibration.dck); + ret = regmap_write(yas5xx->map, YAS530_CONFIG, val); + if (ret) + return ret; + + /* Measure interval 0 (back-to-back?) */ + return regmap_write(yas5xx->map, YAS530_MEASURE_INTERVAL, 0); +} + +static int yas537_power_on(struct yas5xx *yas5xx) +{ + __be16 buf; + int ret; + u8 intrvl; + + /* Writing ADCCAL and TRM registers */ + buf = cpu_to_be16(GENMASK(9, 3)); + ret = regmap_bulk_write(yas5xx->map, YAS537_ADCCAL, &buf, sizeof(buf)); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_TRM, GENMASK(7, 0)); + if (ret) + return ret; + + /* The interval value is static in regular operation */ + intrvl = (YAS537_DEFAULT_SENSOR_DELAY_MS * MILLI + - YAS537_MEASURE_TIME_WORST_US) / 4100; + ret = regmap_write(yas5xx->map, YAS537_MEASURE_INTERVAL, intrvl); + if (ret) + return ret; + + /* The average value is also static in regular operation */ + ret = regmap_write(yas5xx->map, YAS537_AVR, YAS537_MAG_AVERAGE_32_MASK); + if (ret) + return ret; + + /* Perform the "rcoil" part but skip the "last_after_rcoil" read */ + ret = regmap_write(yas5xx->map, YAS537_CONFIG, BIT(3)); + if (ret) + return ret; + + /* Wait until the coil has ramped up */ + usleep_range(YAS537_MAG_RCOIL_TIME_US, YAS537_MAG_RCOIL_TIME_US + 100); + + return 0; +} + +static const struct yas5xx_chip_info yas5xx_chip_info_tbl[] = { + [yas530] = { + .devid = YAS530_DEVICE_ID, + .product_name = "YAS530 MS-3E", + .version_names = { "A", "B" }, + .volatile_reg = yas530_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg), + .scaling_val2 = 100000000, /* picotesla to Gauss */ + .t_ref = 182, /* counts */ + .min_temp_x10 = -620, /* 1/10:s degrees Celsius */ + .get_measure = yas530_get_measure, + .get_calibration_data = yas530_get_calibration_data, + .dump_calibration = yas530_dump_calibration, + .measure_offsets = yas530_measure_offsets, + .power_on = yas530_power_on, + }, + [yas532] = { + .devid = YAS532_DEVICE_ID, + .product_name = "YAS532 MS-3R", + .version_names = { "AB", "AC" }, + .volatile_reg = yas530_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg), + .scaling_val2 = 100000, /* nanotesla to Gauss */ + .t_ref = 390, /* counts */ + .min_temp_x10 = -500, /* 1/10:s degrees Celsius */ + .get_measure = yas530_get_measure, + .get_calibration_data = yas532_get_calibration_data, + .dump_calibration = yas530_dump_calibration, + .measure_offsets = yas530_measure_offsets, + .power_on = yas530_power_on, + }, + [yas533] = { + .devid = YAS532_DEVICE_ID, + .product_name = "YAS533 MS-3F", + .version_names = { "AB", "AC" }, + .volatile_reg = yas530_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg), + .scaling_val2 = 100000, /* nanotesla to Gauss */ + .t_ref = 390, /* counts */ + .min_temp_x10 = -500, /* 1/10:s degrees Celsius */ + .get_measure = yas530_get_measure, + .get_calibration_data = yas532_get_calibration_data, + .dump_calibration = yas530_dump_calibration, + .measure_offsets = yas530_measure_offsets, + .power_on = yas530_power_on, + }, + [yas537] = { + .devid = YAS537_DEVICE_ID, + .product_name = "YAS537 MS-3T", + .version_names = { "v0", "v1" }, /* version naming unknown */ + .volatile_reg = yas537_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas537_volatile_reg), + .scaling_val2 = 100000, /* nanotesla to Gauss */ + .t_ref = 8120, /* counts */ + .min_temp_x10 = -3860, /* 1/10:s degrees Celsius */ + .get_measure = yas537_get_measure, + .get_calibration_data = yas537_get_calibration_data, + .dump_calibration = yas537_dump_calibration, + /* .measure_offets is not needed for yas537 */ + .power_on = yas537_power_on, + }, +}; + +static int yas5xx_probe(struct i2c_client *i2c) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(i2c); + struct iio_dev *indio_dev; + struct device *dev = &i2c->dev; + struct yas5xx *yas5xx; + const struct yas5xx_chip_info *ci; + int id_check; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*yas5xx)); + if (!indio_dev) + return -ENOMEM; + + yas5xx = iio_priv(indio_dev); + i2c_set_clientdata(i2c, indio_dev); + yas5xx->dev = dev; + mutex_init(&yas5xx->lock); + + ret = iio_read_mount_matrix(dev, &yas5xx->orientation); + if (ret) + return ret; + + yas5xx->regs[0].supply = "vdd"; + yas5xx->regs[1].supply = "iovdd"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(yas5xx->regs), + yas5xx->regs); + if (ret) + return dev_err_probe(dev, ret, "cannot get regulators\n"); + + ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + if (ret) + return dev_err_probe(dev, ret, "cannot enable regulators\n"); + + /* See comment in runtime resume callback */ + usleep_range(31000, 40000); + + /* This will take the device out of reset if need be */ + yas5xx->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(yas5xx->reset)) { + ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset), "failed to get reset line\n"); + goto reg_off; + } + + yas5xx->map = devm_regmap_init_i2c(i2c, &yas5xx_regmap_config); + if (IS_ERR(yas5xx->map)) { + ret = dev_err_probe(dev, PTR_ERR(yas5xx->map), "failed to allocate register map\n"); + goto assert_reset; + } + + ci = device_get_match_data(dev); + if (!ci) + ci = (const struct yas5xx_chip_info *)id->driver_data; + yas5xx->chip_info = ci; + + ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &id_check); + if (ret) + goto assert_reset; + + if (id_check != ci->devid) { + ret = dev_err_probe(dev, -ENODEV, + "device ID %02x doesn't match %s\n", + id_check, id->name); + goto assert_reset; + } + + ret = ci->get_calibration_data(yas5xx); + if (ret) + goto assert_reset; + + dev_info(dev, "detected %s %s\n", ci->product_name, + ci->version_names[yas5xx->version]); + + ci->dump_calibration(yas5xx); + + ret = ci->power_on(yas5xx); + if (ret) + goto assert_reset; + + if (ci->measure_offsets) { + ret = ci->measure_offsets(yas5xx); + if (ret) + goto assert_reset; + } + + indio_dev->info = &yas5xx_info; + indio_dev->available_scan_masks = yas5xx_scan_masks; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = id->name; + indio_dev->channels = yas5xx_channels; + indio_dev->num_channels = ARRAY_SIZE(yas5xx_channels); + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + yas5xx_handle_trigger, + NULL); + if (ret) { + dev_err_probe(dev, ret, "triggered buffer setup failed\n"); + goto assert_reset; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err_probe(dev, ret, "device register failed\n"); + goto cleanup_buffer; + } + + /* Take runtime PM online */ + pm_runtime_get_noresume(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + pm_runtime_set_autosuspend_delay(dev, YAS5XX_AUTOSUSPEND_DELAY_MS); + pm_runtime_use_autosuspend(dev); + pm_runtime_put(dev); + + return 0; + +cleanup_buffer: + iio_triggered_buffer_cleanup(indio_dev); +assert_reset: + gpiod_set_value_cansleep(yas5xx->reset, 1); +reg_off: + regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + + return ret; +} + +static void yas5xx_remove(struct i2c_client *i2c) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(i2c); + struct yas5xx *yas5xx = iio_priv(indio_dev); + struct device *dev = &i2c->dev; + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + /* + * Now we can't get any more reads from the device, which would + * also call pm_runtime* functions and race with our disable + * code. Disable PM runtime in orderly fashion and power down. + */ + pm_runtime_get_sync(dev); + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + gpiod_set_value_cansleep(yas5xx->reset, 1); + regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); +} + +static int yas5xx_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct yas5xx *yas5xx = iio_priv(indio_dev); + + gpiod_set_value_cansleep(yas5xx->reset, 1); + regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + + return 0; +} + +static int yas5xx_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + if (ret) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + + /* + * The YAS530 datasheet says TVSKW is up to 30 ms, after that 1 ms + * for all voltages to settle. The YAS532 is 10ms then 4ms for the + * I2C to come online. Let's keep it safe and put this at 31ms. + */ + usleep_range(31000, 40000); + gpiod_set_value_cansleep(yas5xx->reset, 0); + + ret = ci->power_on(yas5xx); + if (ret) { + dev_err(dev, "cannot power on\n"); + goto out_reset; + } + + return 0; + +out_reset: + gpiod_set_value_cansleep(yas5xx->reset, 1); + regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + + return ret; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(yas5xx_dev_pm_ops, yas5xx_runtime_suspend, + yas5xx_runtime_resume, NULL); + +static const struct i2c_device_id yas5xx_id[] = { + {"yas530", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas530] }, + {"yas532", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas532] }, + {"yas533", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas533] }, + {"yas537", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas537] }, + {} +}; +MODULE_DEVICE_TABLE(i2c, yas5xx_id); + +static const struct of_device_id yas5xx_of_match[] = { + { .compatible = "yamaha,yas530", &yas5xx_chip_info_tbl[yas530] }, + { .compatible = "yamaha,yas532", &yas5xx_chip_info_tbl[yas532] }, + { .compatible = "yamaha,yas533", &yas5xx_chip_info_tbl[yas533] }, + { .compatible = "yamaha,yas537", &yas5xx_chip_info_tbl[yas537] }, + {} +}; +MODULE_DEVICE_TABLE(of, yas5xx_of_match); + +static struct i2c_driver yas5xx_driver = { + .driver = { + .name = "yas5xx", + .of_match_table = yas5xx_of_match, + .pm = pm_ptr(&yas5xx_dev_pm_ops), + }, + .probe = yas5xx_probe, + .remove = yas5xx_remove, + .id_table = yas5xx_id, +}; +module_i2c_driver(yas5xx_driver); + +MODULE_DESCRIPTION("Yamaha YAS53x 3-axis magnetometer driver"); +MODULE_AUTHOR("Linus Walleij"); +MODULE_LICENSE("GPL v2"); |