diff options
Diffstat (limited to 'drivers/iio')
113 files changed, 6314 insertions, 1145 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index b6b45d359f..d2221fe9ad 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -219,10 +219,12 @@ config BMA400 config BMA400_I2C tristate + select REGMAP_I2C depends on BMA400 config BMA400_SPI tristate + select REGMAP_SPI depends on BMA400 config BMC150_ACCEL @@ -418,8 +420,9 @@ config IIO_KX022A_SPI select IIO_KX022A select REGMAP_SPI help - Enable support for the Kionix KX022A digital tri-axis - accelerometer connected to I2C interface. + Enable support for the Kionix digital tri-axis accelerometers + connected to SPI interface. Supported devices are: + KX022A, KX132-1211, KX132ACR-LBZ config IIO_KX022A_I2C tristate "Kionix KX022A tri-axis digital accelerometer I2C interface" @@ -427,8 +430,9 @@ config IIO_KX022A_I2C select IIO_KX022A select REGMAP_I2C help - Enable support for the Kionix KX022A digital tri-axis - accelerometer connected to I2C interface. + Enable support for the Kionix digital tri-axis accelerometers + connected to I2C interface. Supported devices are: + KX022A, KX132-1211, KX132ACR-LBZ config KXSD9 tristate "Kionix KXSD9 Accelerometer Driver" diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h index d7e67cb085..284bd387ce 100644 --- a/drivers/iio/accel/adxl345.h +++ b/drivers/iio/accel/adxl345.h @@ -8,9 +8,24 @@ #ifndef _ADXL345_H_ #define _ADXL345_H_ -enum adxl345_device_type { - ADXL345 = 1, - ADXL375 = 2, +/* + * In full-resolution mode, scale factor is maintained at ~4 mg/LSB + * in all g ranges. + * + * At +/- 16g with 13-bit resolution, scale is computed as: + * (16 + 16) * 9.81 / (2^13 - 1) = 0.0383 + */ +#define ADXL345_USCALE 38300 + +/* + * The Datasheet lists a resolution of Resolution is ~49 mg per LSB. That's + * ~480mm/s**2 per LSB. + */ +#define ADXL375_USCALE 480000 + +struct adxl345_chip_info { + const char *name; + int uscale; }; int adxl345_core_probe(struct device *dev, struct regmap *regmap); diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c index 1919e0089c..8bd30a23ed 100644 --- a/drivers/iio/accel/adxl345_core.c +++ b/drivers/iio/accel/adxl345_core.c @@ -45,25 +45,10 @@ #define ADXL345_DEVID 0xE5 -/* - * In full-resolution mode, scale factor is maintained at ~4 mg/LSB - * in all g ranges. - * - * At +/- 16g with 13-bit resolution, scale is computed as: - * (16 + 16) * 9.81 / (2^13 - 1) = 0.0383 - */ -static const int adxl345_uscale = 38300; - -/* - * The Datasheet lists a resolution of Resolution is ~49 mg per LSB. That's - * ~480mm/s**2 per LSB. - */ -static const int adxl375_uscale = 480000; - struct adxl345_data { + const struct adxl345_chip_info *info; struct regmap *regmap; u8 data_range; - enum adxl345_device_type type; }; #define ADXL345_CHANNEL(index, axis) { \ @@ -110,15 +95,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = 0; - switch (data->type) { - case ADXL345: - *val2 = adxl345_uscale; - break; - case ADXL375: - *val2 = adxl375_uscale; - break; - } - + *val2 = data->info->uscale; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_CALIBBIAS: ret = regmap_read(data->regmap, @@ -222,25 +199,11 @@ static void adxl345_powerdown(void *regmap) int adxl345_core_probe(struct device *dev, struct regmap *regmap) { - enum adxl345_device_type type; struct adxl345_data *data; struct iio_dev *indio_dev; - const char *name; u32 regval; int ret; - type = (uintptr_t)device_get_match_data(dev); - switch (type) { - case ADXL345: - name = "adxl345"; - break; - case ADXL375: - name = "adxl375"; - break; - default: - return -EINVAL; - } - ret = regmap_read(regmap, ADXL345_REG_DEVID, ®val); if (ret < 0) return dev_err_probe(dev, ret, "Error reading device ID\n"); @@ -255,16 +218,18 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap) data = iio_priv(indio_dev); data->regmap = regmap; - data->type = type; /* Enable full-resolution mode */ data->data_range = ADXL345_DATA_FORMAT_FULL_RES; + data->info = device_get_match_data(dev); + if (!data->info) + return -ENODEV; ret = regmap_write(data->regmap, ADXL345_REG_DATA_FORMAT, data->data_range); if (ret < 0) return dev_err_probe(dev, ret, "Failed to set data range\n"); - indio_dev->name = name; + indio_dev->name = data->info->name; indio_dev->info = &adxl345_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = adxl345_channels; diff --git a/drivers/iio/accel/adxl345_i2c.c b/drivers/iio/accel/adxl345_i2c.c index e47d12f196..a3084b0a8f 100644 --- a/drivers/iio/accel/adxl345_i2c.c +++ b/drivers/iio/accel/adxl345_i2c.c @@ -30,22 +30,32 @@ static int adxl345_i2c_probe(struct i2c_client *client) return adxl345_core_probe(&client->dev, regmap); } +static const struct adxl345_chip_info adxl345_i2c_info = { + .name = "adxl345", + .uscale = ADXL345_USCALE, +}; + +static const struct adxl345_chip_info adxl375_i2c_info = { + .name = "adxl375", + .uscale = ADXL375_USCALE, +}; + static const struct i2c_device_id adxl345_i2c_id[] = { - { "adxl345", ADXL345 }, - { "adxl375", ADXL375 }, + { "adxl345", (kernel_ulong_t)&adxl345_i2c_info }, + { "adxl375", (kernel_ulong_t)&adxl375_i2c_info }, { } }; MODULE_DEVICE_TABLE(i2c, adxl345_i2c_id); static const struct of_device_id adxl345_of_match[] = { - { .compatible = "adi,adxl345", .data = (const void *)ADXL345 }, - { .compatible = "adi,adxl375", .data = (const void *)ADXL375 }, + { .compatible = "adi,adxl345", .data = &adxl345_i2c_info }, + { .compatible = "adi,adxl375", .data = &adxl375_i2c_info }, { } }; MODULE_DEVICE_TABLE(of, adxl345_of_match); static const struct acpi_device_id adxl345_acpi_match[] = { - { "ADS0345", ADXL345 }, + { "ADS0345", (kernel_ulong_t)&adxl345_i2c_info }, { } }; MODULE_DEVICE_TABLE(acpi, adxl345_acpi_match); diff --git a/drivers/iio/accel/adxl345_spi.c b/drivers/iio/accel/adxl345_spi.c index aaade58086..93ca349f17 100644 --- a/drivers/iio/accel/adxl345_spi.c +++ b/drivers/iio/accel/adxl345_spi.c @@ -36,22 +36,32 @@ static int adxl345_spi_probe(struct spi_device *spi) return adxl345_core_probe(&spi->dev, regmap); } +static const struct adxl345_chip_info adxl345_spi_info = { + .name = "adxl345", + .uscale = ADXL345_USCALE, +}; + +static const struct adxl345_chip_info adxl375_spi_info = { + .name = "adxl375", + .uscale = ADXL375_USCALE, +}; + static const struct spi_device_id adxl345_spi_id[] = { - { "adxl345", ADXL345 }, - { "adxl375", ADXL375 }, + { "adxl345", (kernel_ulong_t)&adxl345_spi_info }, + { "adxl375", (kernel_ulong_t)&adxl375_spi_info }, { } }; MODULE_DEVICE_TABLE(spi, adxl345_spi_id); static const struct of_device_id adxl345_of_match[] = { - { .compatible = "adi,adxl345", .data = (const void *)ADXL345 }, - { .compatible = "adi,adxl375", .data = (const void *)ADXL375 }, + { .compatible = "adi,adxl345", .data = &adxl345_spi_info }, + { .compatible = "adi,adxl375", .data = &adxl375_spi_info }, { } }; MODULE_DEVICE_TABLE(of, adxl345_of_match); static const struct acpi_device_id adxl345_acpi_match[] = { - { "ADS0345", ADXL345 }, + { "ADS0345", (kernel_ulong_t)&adxl345_spi_info }, { } }; MODULE_DEVICE_TABLE(acpi, adxl345_acpi_match); diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index 13439f52d2..ab4fccb24b 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -926,7 +926,6 @@ static int bma180_probe(struct i2c_client *client) struct device *dev = &client->dev; struct bma180_data *data; struct iio_dev *indio_dev; - enum chip_ids chip; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); @@ -936,11 +935,7 @@ static int bma180_probe(struct i2c_client *client) data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; - if (client->dev.of_node) - chip = (uintptr_t)of_device_get_match_data(dev); - else - chip = id->driver_data; - data->part_info = &bma180_part_info[chip]; + data->part_info = i2c_get_match_data(client); ret = iio_read_mount_matrix(dev, &data->orientation); if (ret) @@ -1092,11 +1087,11 @@ static int bma180_resume(struct device *dev) static DEFINE_SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume); static const struct i2c_device_id bma180_ids[] = { - { "bma023", BMA023 }, - { "bma150", BMA150 }, - { "bma180", BMA180 }, - { "bma250", BMA250 }, - { "smb380", BMA150 }, + { "bma023", (kernel_ulong_t)&bma180_part_info[BMA023] }, + { "bma150", (kernel_ulong_t)&bma180_part_info[BMA150] }, + { "bma180", (kernel_ulong_t)&bma180_part_info[BMA180] }, + { "bma250", (kernel_ulong_t)&bma180_part_info[BMA250] }, + { "smb380", (kernel_ulong_t)&bma180_part_info[BMA150] }, { } }; @@ -1105,23 +1100,23 @@ MODULE_DEVICE_TABLE(i2c, bma180_ids); static const struct of_device_id bma180_of_match[] = { { .compatible = "bosch,bma023", - .data = (void *)BMA023 + .data = &bma180_part_info[BMA023] }, { .compatible = "bosch,bma150", - .data = (void *)BMA150 + .data = &bma180_part_info[BMA150] }, { .compatible = "bosch,bma180", - .data = (void *)BMA180 + .data = &bma180_part_info[BMA180] }, { .compatible = "bosch,bma250", - .data = (void *)BMA250 + .data = &bma180_part_info[BMA250] }, { .compatible = "bosch,smb380", - .data = (void *)BMA150 + .data = &bma180_part_info[BMA150] }, { } }; diff --git a/drivers/iio/accel/fxls8962af.h b/drivers/iio/accel/fxls8962af.h index 9cbe98c3ba..6eaa2803b2 100644 --- a/drivers/iio/accel/fxls8962af.h +++ b/drivers/iio/accel/fxls8962af.h @@ -14,7 +14,6 @@ enum { }; int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq); -int fxls8962af_core_remove(struct device *dev); extern const struct dev_pm_ops fxls8962af_pm_ops; extern const struct regmap_config fxls8962af_i2c_regmap_conf; diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index 5eac7ea199..9b7a73a4c4 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -422,7 +422,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_accel_3d_remove(struct platform_device *pdev) +static void hid_accel_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -431,8 +431,6 @@ static int hid_accel_3d_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &accel_state->common_attributes); - - return 0; } static const struct platform_device_id hid_accel_3d_ids[] = { @@ -454,7 +452,7 @@ static struct platform_driver hid_accel_3d_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_accel_3d_probe, - .remove = hid_accel_3d_remove, + .remove_new = hid_accel_3d_remove, }; module_platform_driver(hid_accel_3d_platform_driver); diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c index b0ac78e85d..8a1d4fc28d 100644 --- a/drivers/iio/accel/kionix-kx022a-i2c.c +++ b/drivers/iio/accel/kionix-kx022a-i2c.c @@ -2,7 +2,7 @@ /* * Copyright (C) 2022 ROHM Semiconductors * - * ROHM/KIONIX KX022A accelerometer driver + * ROHM/KIONIX accelerometer driver */ #include <linux/i2c.h> @@ -15,6 +15,7 @@ static int kx022a_i2c_probe(struct i2c_client *i2c) { struct device *dev = &i2c->dev; + const struct kx022a_chip_info *chip_info; struct regmap *regmap; if (!i2c->irq) { @@ -22,16 +23,30 @@ static int kx022a_i2c_probe(struct i2c_client *i2c) return -EINVAL; } - regmap = devm_regmap_init_i2c(i2c, &kx022a_regmap); + chip_info = i2c_get_match_data(i2c); + if (!chip_info) + return -EINVAL; + + regmap = devm_regmap_init_i2c(i2c, chip_info->regmap_config); if (IS_ERR(regmap)) return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialize Regmap\n"); - return kx022a_probe_internal(dev); + return kx022a_probe_internal(dev, chip_info); } +static const struct i2c_device_id kx022a_i2c_id[] = { + { .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info }, + { .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info }, + { .name = "kx132acr-lbz", .driver_data = (kernel_ulong_t)&kx132acr_chip_info }, + { } +}; +MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id); + static const struct of_device_id kx022a_of_match[] = { - { .compatible = "kionix,kx022a", }, + { .compatible = "kionix,kx022a", .data = &kx022a_chip_info }, + { .compatible = "kionix,kx132-1211", .data = &kx132_chip_info }, + { .compatible = "rohm,kx132acr-lbz", .data = &kx132acr_chip_info }, { } }; MODULE_DEVICE_TABLE(of, kx022a_of_match); @@ -43,6 +58,7 @@ static struct i2c_driver kx022a_i2c_driver = { .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, .probe = kx022a_i2c_probe, + .id_table = kx022a_i2c_id, }; module_i2c_driver(kx022a_i2c_driver); diff --git a/drivers/iio/accel/kionix-kx022a-spi.c b/drivers/iio/accel/kionix-kx022a-spi.c index f45a46899a..f798b964d0 100644 --- a/drivers/iio/accel/kionix-kx022a-spi.c +++ b/drivers/iio/accel/kionix-kx022a-spi.c @@ -2,7 +2,7 @@ /* * Copyright (C) 2022 ROHM Semiconductors * - * ROHM/KIONIX KX022A accelerometer driver + * ROHM/KIONIX accelerometer driver */ #include <linux/interrupt.h> @@ -15,6 +15,7 @@ static int kx022a_spi_probe(struct spi_device *spi) { struct device *dev = &spi->dev; + const struct kx022a_chip_info *chip_info; struct regmap *regmap; if (!spi->irq) { @@ -22,22 +23,30 @@ static int kx022a_spi_probe(struct spi_device *spi) return -EINVAL; } - regmap = devm_regmap_init_spi(spi, &kx022a_regmap); + chip_info = spi_get_device_match_data(spi); + if (!chip_info) + return -EINVAL; + + regmap = devm_regmap_init_spi(spi, chip_info->regmap_config); if (IS_ERR(regmap)) return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialize Regmap\n"); - return kx022a_probe_internal(dev); + return kx022a_probe_internal(dev, chip_info); } static const struct spi_device_id kx022a_id[] = { - { "kx022a" }, + { .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info }, + { .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info }, + { .name = "kx132acr-lbz", .driver_data = (kernel_ulong_t)&kx132acr_chip_info }, { } }; MODULE_DEVICE_TABLE(spi, kx022a_id); static const struct of_device_id kx022a_of_match[] = { - { .compatible = "kionix,kx022a", }, + { .compatible = "kionix,kx022a", .data = &kx022a_chip_info }, + { .compatible = "kionix,kx132-1211", .data = &kx132_chip_info }, + { .compatible = "rohm,kx132acr-lbz", .data = &kx132acr_chip_info }, { } }; MODULE_DEVICE_TABLE(of, kx022a_of_match); diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c index 971fc60efe..53d59a04ae 100644 --- a/drivers/iio/accel/kionix-kx022a.c +++ b/drivers/iio/accel/kionix-kx022a.c @@ -2,7 +2,7 @@ /* * Copyright (C) 2022 ROHM Semiconductors * - * ROHM/KIONIX KX022A accelerometer driver + * ROHM/KIONIX accelerometer driver */ #include <linux/delay.h> @@ -15,7 +15,7 @@ #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> -#include <linux/string_helpers.h> +#include <linux/string_choices.h> #include <linux/units.h> #include <linux/iio/iio.h> @@ -48,7 +48,7 @@ enum { KX022A_STATE_FIFO, }; -/* Regmap configs */ +/* kx022a Regmap configs */ static const struct regmap_range kx022a_volatile_ranges[] = { { .range_min = KX022A_REG_XHP_L, @@ -138,7 +138,7 @@ static const struct regmap_access_table kx022a_nir_regs = { .n_yes_ranges = ARRAY_SIZE(kx022a_noinc_read_ranges), }; -const struct regmap_config kx022a_regmap = { +static const struct regmap_config kx022a_regmap_config = { .reg_bits = 8, .val_bits = 8, .volatile_table = &kx022a_volatile_regs, @@ -149,10 +149,121 @@ const struct regmap_config kx022a_regmap = { .max_register = KX022A_MAX_REGISTER, .cache_type = REGCACHE_RBTREE, }; -EXPORT_SYMBOL_NS_GPL(kx022a_regmap, IIO_KX022A); + +/* Regmap configs kx132 */ +static const struct regmap_range kx132_volatile_ranges[] = { + { + .range_min = KX132_REG_XADP_L, + .range_max = KX132_REG_COTR, + }, { + .range_min = KX132_REG_TSCP, + .range_max = KX132_REG_INT_REL, + }, { + /* The reset bit will be cleared by sensor */ + .range_min = KX132_REG_CNTL2, + .range_max = KX132_REG_CNTL2, + }, { + .range_min = KX132_REG_CNTL5, + .range_max = KX132_REG_CNTL5, + }, { + .range_min = KX132_REG_BUF_STATUS_1, + .range_max = KX132_REG_BUF_READ, + }, +}; + +static const struct regmap_access_table kx132_volatile_regs = { + .yes_ranges = &kx132_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_volatile_ranges), +}; + +static const struct regmap_range kx132_precious_ranges[] = { + { + .range_min = KX132_REG_INT_REL, + .range_max = KX132_REG_INT_REL, + }, +}; + +static const struct regmap_access_table kx132_precious_regs = { + .yes_ranges = &kx132_precious_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_precious_ranges), +}; + +static const struct regmap_range kx132_read_only_ranges[] = { + { + .range_min = KX132_REG_XADP_L, + .range_max = KX132_REG_INT_REL, + }, { + .range_min = KX132_REG_BUF_STATUS_1, + .range_max = KX132_REG_BUF_STATUS_2, + }, { + .range_min = KX132_REG_BUF_READ, + .range_max = KX132_REG_BUF_READ, + }, { + /* Kionix reserved registers: should not be written */ + .range_min = 0x28, + .range_max = 0x28, + }, { + .range_min = 0x35, + .range_max = 0x36, + }, { + .range_min = 0x3c, + .range_max = 0x48, + }, { + .range_min = 0x4e, + .range_max = 0x5c, + }, { + .range_min = 0x77, + .range_max = 0x7f, + }, +}; + +static const struct regmap_access_table kx132_ro_regs = { + .no_ranges = &kx132_read_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(kx132_read_only_ranges), +}; + +static const struct regmap_range kx132_write_only_ranges[] = { + { + .range_min = KX132_REG_SELF_TEST, + .range_max = KX132_REG_SELF_TEST, + }, { + .range_min = KX132_REG_BUF_CLEAR, + .range_max = KX132_REG_BUF_CLEAR, + }, +}; + +static const struct regmap_access_table kx132_wo_regs = { + .no_ranges = &kx132_write_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(kx132_write_only_ranges), +}; + +static const struct regmap_range kx132_noinc_read_ranges[] = { + { + .range_min = KX132_REG_BUF_READ, + .range_max = KX132_REG_BUF_READ, + }, +}; + +static const struct regmap_access_table kx132_nir_regs = { + .yes_ranges = &kx132_noinc_read_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_noinc_read_ranges), +}; + +static const struct regmap_config kx132_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &kx132_volatile_regs, + .rd_table = &kx132_wo_regs, + .wr_table = &kx132_ro_regs, + .rd_noinc_table = &kx132_nir_regs, + .precious_table = &kx132_precious_regs, + .max_register = KX132_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; struct kx022a_data { struct regmap *regmap; + const struct kx022a_chip_info *chip_info; struct iio_trigger *trig; struct device *dev; struct iio_mount_matrix orientation; @@ -175,6 +286,8 @@ struct kx022a_data { struct mutex mutex; u8 watermark; + __le16 *fifo_buffer; + /* 3 x 16bit accel data + timestamp */ __le16 buffer[8] __aligned(IIO_DMA_MINALIGN); struct { @@ -208,7 +321,7 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = { { } }; -#define KX022A_ACCEL_CHAN(axis, index) \ +#define KX022A_ACCEL_CHAN(axis, reg, index) \ { \ .type = IIO_ACCEL, \ .modified = 1, \ @@ -220,7 +333,7 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = { BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_SAMP_FREQ), \ .ext_info = kx022a_ext_info, \ - .address = KX022A_REG_##axis##OUT_L, \ + .address = reg, \ .scan_index = index, \ .scan_type = { \ .sign = 's', \ @@ -231,9 +344,16 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = { } static const struct iio_chan_spec kx022a_channels[] = { - KX022A_ACCEL_CHAN(X, 0), - KX022A_ACCEL_CHAN(Y, 1), - KX022A_ACCEL_CHAN(Z, 2), + KX022A_ACCEL_CHAN(X, KX022A_REG_XOUT_L, 0), + KX022A_ACCEL_CHAN(Y, KX022A_REG_YOUT_L, 1), + KX022A_ACCEL_CHAN(Z, KX022A_REG_ZOUT_L, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_chan_spec kx132_channels[] = { + KX022A_ACCEL_CHAN(X, KX132_REG_XOUT_L, 0), + KX022A_ACCEL_CHAN(Y, KX132_REG_YOUT_L, 1), + KX022A_ACCEL_CHAN(Z, KX132_REG_ZOUT_L, 2), IIO_CHAN_SOFT_TIMESTAMP(3), }; @@ -332,16 +452,15 @@ static int kx022a_turn_on_off_unlocked(struct kx022a_data *data, bool on) int ret; if (on) - ret = regmap_set_bits(data->regmap, KX022A_REG_CNTL, + ret = regmap_set_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_PC1); else - ret = regmap_clear_bits(data->regmap, KX022A_REG_CNTL, + ret = regmap_clear_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_PC1); if (ret) dev_err(data->dev, "Turn %s fail %d\n", str_on_off(on), ret); return ret; - } static int kx022a_turn_off_lock(struct kx022a_data *data) @@ -417,7 +536,7 @@ static int kx022a_write_raw(struct iio_dev *idev, break; ret = regmap_update_bits(data->regmap, - KX022A_REG_ODCNTL, + data->chip_info->odcntl, KX022A_MASK_ODR, n); data->odr_ns = kx022a_odrs[n]; kx022a_turn_on_unlock(data); @@ -438,7 +557,7 @@ static int kx022a_write_raw(struct iio_dev *idev, if (ret) break; - ret = regmap_update_bits(data->regmap, KX022A_REG_CNTL, + ret = regmap_update_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_GSEL, n << KX022A_GSEL_SHIFT); kx022a_turn_on_unlock(data); @@ -460,7 +579,7 @@ static int kx022a_fifo_set_wmi(struct kx022a_data *data) threshold = data->watermark; - return regmap_update_bits(data->regmap, KX022A_REG_BUF_CNTL1, + return regmap_update_bits(data->regmap, data->chip_info->buf_cntl1, KX022A_MASK_WM_TH, threshold); } @@ -503,7 +622,7 @@ static int kx022a_read_raw(struct iio_dev *idev, return ret; case IIO_CHAN_INFO_SAMP_FREQ: - ret = regmap_read(data->regmap, KX022A_REG_ODCNTL, ®val); + ret = regmap_read(data->regmap, data->chip_info->odcntl, ®val); if (ret) return ret; @@ -518,7 +637,7 @@ static int kx022a_read_raw(struct iio_dev *idev, return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SCALE: - ret = regmap_read(data->regmap, KX022A_REG_CNTL, ®val); + ret = regmap_read(data->regmap, data->chip_info->cntl, ®val); if (ret < 0) return ret; @@ -534,8 +653,7 @@ static int kx022a_set_watermark(struct iio_dev *idev, unsigned int val) { struct kx022a_data *data = iio_priv(idev); - if (val > KX022A_FIFO_LENGTH) - val = KX022A_FIFO_LENGTH; + val = min(data->chip_info->fifo_length, val); mutex_lock(&data->mutex); data->watermark = val; @@ -596,30 +714,56 @@ static int kx022a_drop_fifo_contents(struct kx022a_data *data) */ data->timestamp = 0; - return regmap_write(data->regmap, KX022A_REG_BUF_CLEAR, 0x0); + return regmap_write(data->regmap, data->chip_info->buf_clear, 0x0); +} + +static int kx022a_get_fifo_bytes_available(struct kx022a_data *data) +{ + int ret, fifo_bytes; + + ret = regmap_read(data->regmap, KX022A_REG_BUF_STATUS_1, &fifo_bytes); + if (ret) { + dev_err(data->dev, "Error reading buffer status\n"); + return ret; + } + + if (fifo_bytes == KX022A_FIFO_FULL_VALUE) + return KX022A_FIFO_MAX_BYTES; + + return fifo_bytes; +} + +static int kx132_get_fifo_bytes_available(struct kx022a_data *data) +{ + __le16 buf_status; + int ret, fifo_bytes; + + ret = regmap_bulk_read(data->regmap, data->chip_info->buf_status1, + &buf_status, sizeof(buf_status)); + if (ret) { + dev_err(data->dev, "Error reading buffer status\n"); + return ret; + } + + fifo_bytes = le16_to_cpu(buf_status); + fifo_bytes &= data->chip_info->buf_smp_lvl_mask; + fifo_bytes = min((unsigned int)fifo_bytes, data->chip_info->fifo_length * + KX022A_FIFO_SAMPLES_SIZE_BYTES); + + return fifo_bytes; } static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples, bool irq) { struct kx022a_data *data = iio_priv(idev); - struct device *dev = regmap_get_device(data->regmap); - __le16 buffer[KX022A_FIFO_LENGTH * 3]; uint64_t sample_period; int count, fifo_bytes; bool renable = false; int64_t tstamp; int ret, i; - ret = regmap_read(data->regmap, KX022A_REG_BUF_STATUS_1, &fifo_bytes); - if (ret) { - dev_err(dev, "Error reading buffer status\n"); - return ret; - } - - /* Let's not overflow if we for some reason get bogus value from i2c */ - if (fifo_bytes == KX022A_FIFO_FULL_VALUE) - fifo_bytes = KX022A_FIFO_MAX_BYTES; + fifo_bytes = data->chip_info->get_fifo_bytes_available(data); if (fifo_bytes % KX022A_FIFO_SAMPLES_SIZE_BYTES) dev_warn(data->dev, "Bad FIFO alignment. Data may be corrupt\n"); @@ -683,13 +827,13 @@ static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples, } fifo_bytes = count * KX022A_FIFO_SAMPLES_SIZE_BYTES; - ret = regmap_noinc_read(data->regmap, KX022A_REG_BUF_READ, - &buffer[0], fifo_bytes); + ret = regmap_noinc_read(data->regmap, data->chip_info->buf_read, + data->fifo_buffer, fifo_bytes); if (ret) goto renable_out; for (i = 0; i < count; i++) { - __le16 *sam = &buffer[i * 3]; + __le16 *sam = &data->fifo_buffer[i * 3]; __le16 *chs; int bit; @@ -737,10 +881,10 @@ static const struct iio_info kx022a_info = { static int kx022a_set_drdy_irq(struct kx022a_data *data, bool en) { if (en) - return regmap_set_bits(data->regmap, KX022A_REG_CNTL, + return regmap_set_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_DRDY); - return regmap_clear_bits(data->regmap, KX022A_REG_CNTL, + return regmap_clear_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_DRDY); } @@ -775,7 +919,7 @@ static int kx022a_fifo_disable(struct kx022a_data *data) if (ret) goto unlock_out; - ret = regmap_clear_bits(data->regmap, KX022A_REG_BUF_CNTL2, + ret = regmap_clear_bits(data->regmap, data->chip_info->buf_cntl2, KX022A_MASK_BUF_EN); if (ret) goto unlock_out; @@ -784,6 +928,8 @@ static int kx022a_fifo_disable(struct kx022a_data *data) kx022a_drop_fifo_contents(data); + kfree(data->fifo_buffer); + return kx022a_turn_on_unlock(data); unlock_out: @@ -806,6 +952,12 @@ static int kx022a_fifo_enable(struct kx022a_data *data) { int ret; + data->fifo_buffer = kmalloc_array(data->chip_info->fifo_length, + KX022A_FIFO_SAMPLES_SIZE_BYTES, + GFP_KERNEL); + if (!data->fifo_buffer) + return -ENOMEM; + ret = kx022a_turn_off_lock(data); if (ret) return ret; @@ -816,7 +968,7 @@ static int kx022a_fifo_enable(struct kx022a_data *data) goto unlock_out; /* Enable buffer */ - ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2, + ret = regmap_set_bits(data->regmap, data->chip_info->buf_cntl2, KX022A_MASK_BUF_EN); if (ret) goto unlock_out; @@ -862,7 +1014,7 @@ static irqreturn_t kx022a_trigger_handler(int irq, void *p) struct kx022a_data *data = iio_priv(idev); int ret; - ret = regmap_bulk_read(data->regmap, KX022A_REG_XOUT_L, data->buffer, + ret = regmap_bulk_read(data->regmap, data->chip_info->xout_l, data->buffer, KX022A_FIFO_SAMPLES_SIZE_BYTES); if (ret < 0) goto err_read; @@ -910,7 +1062,7 @@ static irqreturn_t kx022a_irq_thread_handler(int irq, void *private) if (data->state & KX022A_STATE_FIFO) { int ok; - ok = __kx022a_fifo_flush(idev, KX022A_FIFO_LENGTH, true); + ok = __kx022a_fifo_flush(idev, data->chip_info->fifo_length, true); if (ok > 0) ret = IRQ_HANDLED; } @@ -963,7 +1115,7 @@ static int kx022a_chip_init(struct kx022a_data *data) int ret, val; /* Reset the senor */ - ret = regmap_write(data->regmap, KX022A_REG_CNTL2, KX022A_MASK_SRST); + ret = regmap_write(data->regmap, data->chip_info->cntl2, KX022A_MASK_SRST); if (ret) return ret; @@ -973,7 +1125,7 @@ static int kx022a_chip_init(struct kx022a_data *data) */ msleep(1); - ret = regmap_read_poll_timeout(data->regmap, KX022A_REG_CNTL2, val, + ret = regmap_read_poll_timeout(data->regmap, data->chip_info->cntl2, val, !(val & KX022A_MASK_SRST), KX022A_SOFT_RESET_WAIT_TIME_US, KX022A_SOFT_RESET_TOTAL_WAIT_TIME_US); @@ -983,14 +1135,14 @@ static int kx022a_chip_init(struct kx022a_data *data) return ret; } - ret = regmap_reinit_cache(data->regmap, &kx022a_regmap); + ret = regmap_reinit_cache(data->regmap, data->chip_info->regmap_config); if (ret) { dev_err(data->dev, "Failed to reinit reg cache\n"); return ret; } /* set data res 16bit */ - ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2, + ret = regmap_set_bits(data->regmap, data->chip_info->buf_cntl2, KX022A_MASK_BRES16); if (ret) { dev_err(data->dev, "Failed to set data resolution\n"); @@ -1000,7 +1152,90 @@ static int kx022a_chip_init(struct kx022a_data *data) return kx022a_prepare_irq_pin(data); } -int kx022a_probe_internal(struct device *dev) +const struct kx022a_chip_info kx022a_chip_info = { + .name = "kx022-accel", + .regmap_config = &kx022a_regmap_config, + .channels = kx022a_channels, + .num_channels = ARRAY_SIZE(kx022a_channels), + .fifo_length = KX022A_FIFO_LENGTH, + .who = KX022A_REG_WHO, + .id = KX022A_ID, + .cntl = KX022A_REG_CNTL, + .cntl2 = KX022A_REG_CNTL2, + .odcntl = KX022A_REG_ODCNTL, + .buf_cntl1 = KX022A_REG_BUF_CNTL1, + .buf_cntl2 = KX022A_REG_BUF_CNTL2, + .buf_clear = KX022A_REG_BUF_CLEAR, + .buf_status1 = KX022A_REG_BUF_STATUS_1, + .buf_read = KX022A_REG_BUF_READ, + .inc1 = KX022A_REG_INC1, + .inc4 = KX022A_REG_INC4, + .inc5 = KX022A_REG_INC5, + .inc6 = KX022A_REG_INC6, + .xout_l = KX022A_REG_XOUT_L, + .get_fifo_bytes_available = kx022a_get_fifo_bytes_available, +}; +EXPORT_SYMBOL_NS_GPL(kx022a_chip_info, IIO_KX022A); + +const struct kx022a_chip_info kx132_chip_info = { + .name = "kx132-1211", + .regmap_config = &kx132_regmap_config, + .channels = kx132_channels, + .num_channels = ARRAY_SIZE(kx132_channels), + .fifo_length = KX132_FIFO_LENGTH, + .who = KX132_REG_WHO, + .id = KX132_ID, + .cntl = KX132_REG_CNTL, + .cntl2 = KX132_REG_CNTL2, + .odcntl = KX132_REG_ODCNTL, + .buf_cntl1 = KX132_REG_BUF_CNTL1, + .buf_cntl2 = KX132_REG_BUF_CNTL2, + .buf_clear = KX132_REG_BUF_CLEAR, + .buf_status1 = KX132_REG_BUF_STATUS_1, + .buf_smp_lvl_mask = KX132_MASK_BUF_SMP_LVL, + .buf_read = KX132_REG_BUF_READ, + .inc1 = KX132_REG_INC1, + .inc4 = KX132_REG_INC4, + .inc5 = KX132_REG_INC5, + .inc6 = KX132_REG_INC6, + .xout_l = KX132_REG_XOUT_L, + .get_fifo_bytes_available = kx132_get_fifo_bytes_available, +}; +EXPORT_SYMBOL_NS_GPL(kx132_chip_info, IIO_KX022A); + +/* + * Despite the naming, KX132ACR-LBZ is not similar to KX132-1211 but it is + * exact subset of KX022A. KX132ACR-LBZ is meant to be used for industrial + * applications and the tap/double tap, free fall and tilt engines were + * removed. Rest of the registers and functionalities (excluding the ID + * register) are exact match to what is found in KX022. + */ +const struct kx022a_chip_info kx132acr_chip_info = { + .name = "kx132acr-lbz", + .regmap_config = &kx022a_regmap_config, + .channels = kx022a_channels, + .num_channels = ARRAY_SIZE(kx022a_channels), + .fifo_length = KX022A_FIFO_LENGTH, + .who = KX022A_REG_WHO, + .id = KX132ACR_LBZ_ID, + .cntl = KX022A_REG_CNTL, + .cntl2 = KX022A_REG_CNTL2, + .odcntl = KX022A_REG_ODCNTL, + .buf_cntl1 = KX022A_REG_BUF_CNTL1, + .buf_cntl2 = KX022A_REG_BUF_CNTL2, + .buf_clear = KX022A_REG_BUF_CLEAR, + .buf_status1 = KX022A_REG_BUF_STATUS_1, + .buf_read = KX022A_REG_BUF_READ, + .inc1 = KX022A_REG_INC1, + .inc4 = KX022A_REG_INC4, + .inc5 = KX022A_REG_INC5, + .inc6 = KX022A_REG_INC6, + .xout_l = KX022A_REG_XOUT_L, + .get_fifo_bytes_available = kx022a_get_fifo_bytes_available, +}; +EXPORT_SYMBOL_NS_GPL(kx132acr_chip_info, IIO_KX022A); + +int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info) { static const char * const regulator_names[] = {"io-vdd", "vdd"}; struct iio_trigger *indio_trig; @@ -1027,6 +1262,7 @@ int kx022a_probe_internal(struct device *dev) return -ENOMEM; data = iio_priv(idev); + data->chip_info = chip_info; /* * VDD is the analog and digital domain voltage supply and @@ -1037,26 +1273,24 @@ int kx022a_probe_internal(struct device *dev) if (ret && ret != -ENODEV) return dev_err_probe(dev, ret, "failed to enable regulator\n"); - ret = regmap_read(regmap, KX022A_REG_WHO, &chip_id); + ret = regmap_read(regmap, chip_info->who, &chip_id); if (ret) return dev_err_probe(dev, ret, "Failed to access sensor\n"); - if (chip_id != KX022A_ID) { - dev_err(dev, "unsupported device 0x%x\n", chip_id); - return -EINVAL; - } + if (chip_id != chip_info->id) + dev_warn(dev, "unknown device 0x%x\n", chip_id); irq = fwnode_irq_get_byname(fwnode, "INT1"); if (irq > 0) { - data->inc_reg = KX022A_REG_INC1; - data->ien_reg = KX022A_REG_INC4; + data->inc_reg = chip_info->inc1; + data->ien_reg = chip_info->inc4; } else { irq = fwnode_irq_get_byname(fwnode, "INT2"); if (irq < 0) return dev_err_probe(dev, irq, "No suitable IRQ\n"); - data->inc_reg = KX022A_REG_INC5; - data->ien_reg = KX022A_REG_INC6; + data->inc_reg = chip_info->inc5; + data->ien_reg = chip_info->inc6; } data->regmap = regmap; @@ -1065,9 +1299,9 @@ int kx022a_probe_internal(struct device *dev) data->odr_ns = KX022A_DEFAULT_PERIOD_NS; mutex_init(&data->mutex); - idev->channels = kx022a_channels; - idev->num_channels = ARRAY_SIZE(kx022a_channels); - idev->name = "kx022-accel"; + idev->channels = chip_info->channels; + idev->num_channels = chip_info->num_channels; + idev->name = chip_info->name; idev->info = &kx022a_info; idev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; idev->available_scan_masks = kx022a_scan_masks; @@ -1125,7 +1359,6 @@ int kx022a_probe_internal(struct device *dev) if (ret) return dev_err_probe(data->dev, ret, "Could not request IRQ\n"); - ret = devm_iio_trigger_register(dev, indio_trig); if (ret) return dev_err_probe(data->dev, ret, diff --git a/drivers/iio/accel/kionix-kx022a.h b/drivers/iio/accel/kionix-kx022a.h index 12424649d4..7060438ad8 100644 --- a/drivers/iio/accel/kionix-kx022a.h +++ b/drivers/iio/accel/kionix-kx022a.h @@ -13,6 +13,7 @@ #define KX022A_REG_WHO 0x0f #define KX022A_ID 0xc8 +#define KX132ACR_LBZ_ID 0xd8 #define KX022A_REG_CNTL2 0x19 #define KX022A_MASK_SRST BIT(7) @@ -74,9 +75,118 @@ #define KX022A_REG_SELF_TEST 0x60 #define KX022A_MAX_REGISTER 0x60 +#define KX132_REG_WHO 0x13 +#define KX132_ID 0x3d + +#define KX132_FIFO_LENGTH 86 + +#define KX132_REG_CNTL 0x1b +#define KX132_REG_CNTL2 0x1c +#define KX132_REG_CNTL5 0x1f +#define KX132_MASK_RES BIT(6) +#define KX132_GSEL_2 0x0 +#define KX132_GSEL_4 BIT(3) +#define KX132_GSEL_8 BIT(4) +#define KX132_GSEL_16 GENMASK(4, 3) + +#define KX132_REG_INS2 0x17 +#define KX132_MASK_INS2_WMI BIT(5) + +#define KX132_REG_XADP_L 0x02 +#define KX132_REG_XOUT_L 0x08 +#define KX132_REG_YOUT_L 0x0a +#define KX132_REG_ZOUT_L 0x0c +#define KX132_REG_COTR 0x12 +#define KX132_REG_TSCP 0x14 +#define KX132_REG_INT_REL 0x1a + +#define KX132_REG_ODCNTL 0x21 + +#define KX132_REG_BTS_WUF_TH 0x4a + +#define KX132_REG_BUF_CNTL1 0x5e +#define KX132_REG_BUF_CNTL2 0x5f +#define KX132_REG_BUF_STATUS_1 0x60 +#define KX132_REG_BUF_STATUS_2 0x61 +#define KX132_MASK_BUF_SMP_LVL GENMASK(9, 0) +#define KX132_REG_BUF_CLEAR 0x62 +#define KX132_REG_BUF_READ 0x63 +#define KX132_ODR_SHIFT 3 +#define KX132_FIFO_MAX_WMI_TH 86 + +#define KX132_REG_INC1 0x22 +#define KX132_REG_INC5 0x26 +#define KX132_REG_INC6 0x27 +#define KX132_IPOL_LOW 0 +#define KX132_IPOL_HIGH KX022A_MASK_IPOL +#define KX132_ITYP_PULSE KX022A_MASK_ITYP + +#define KX132_REG_INC4 0x25 + +#define KX132_REG_SELF_TEST 0x5d +#define KX132_MAX_REGISTER 0x76 + struct device; -int kx022a_probe_internal(struct device *dev); -extern const struct regmap_config kx022a_regmap; +struct kx022a_data; + +/** + * struct kx022a_chip_info - Kionix accelerometer chip specific information + * + * @name: name of the device + * @regmap_config: pointer to register map configuration + * @channels: pointer to iio_chan_spec array + * @num_channels: number of iio_chan_spec channels + * @fifo_length: number of 16-bit samples in a full buffer + * @buf_smp_lvl_mask: buffer sample level mask + * @who: WHO_AM_I register + * @id: WHO_AM_I register value + * @cntl: control register 1 + * @cntl2: control register 2 + * @odcntl: output data control register + * @buf_cntl1: buffer control register 1 + * @buf_cntl2: buffer control register 2 + * @buf_clear: buffer clear register + * @buf_status1: buffer status register 1 + * @buf_read: buffer read register + * @inc1: interrupt control register 1 + * @inc4: interrupt control register 4 + * @inc5: interrupt control register 5 + * @inc6: interrupt control register 6 + * @xout_l: x-axis output least significant byte + * @get_fifo_bytes_available: function pointer to get amount of acceleration + * data bytes currently stored in the sensor's FIFO + * buffer + */ +struct kx022a_chip_info { + const char *name; + const struct regmap_config *regmap_config; + const struct iio_chan_spec *channels; + unsigned int num_channels; + unsigned int fifo_length; + u16 buf_smp_lvl_mask; + u8 who; + u8 id; + u8 cntl; + u8 cntl2; + u8 odcntl; + u8 buf_cntl1; + u8 buf_cntl2; + u8 buf_clear; + u8 buf_status1; + u8 buf_read; + u8 inc1; + u8 inc4; + u8 inc5; + u8 inc6; + u8 xout_l; + int (*get_fifo_bytes_available)(struct kx022a_data *); +}; + +int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info); + +extern const struct kx022a_chip_info kx022a_chip_info; +extern const struct kx022a_chip_info kx132_chip_info; +extern const struct kx022a_chip_info kx132acr_chip_info; #endif diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index f42a887114..d3fd0318e4 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1535,19 +1535,18 @@ static int mma8452_reset(struct i2c_client *client) } static const struct of_device_id mma8452_dt_ids[] = { + { .compatible = "fsl,fxls8471", .data = &mma_chip_info_table[fxls8471] }, { .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] }, { .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] }, { .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] }, { .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] }, { .compatible = "fsl,mma8653", .data = &mma_chip_info_table[mma8653] }, - { .compatible = "fsl,fxls8471", .data = &mma_chip_info_table[fxls8471] }, { } }; MODULE_DEVICE_TABLE(of, mma8452_dt_ids); static int mma8452_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct mma8452_data *data; struct iio_dev *indio_dev; int ret; @@ -1560,15 +1559,10 @@ static int mma8452_probe(struct i2c_client *client) data->client = client; mutex_init(&data->lock); - data->chip_info = device_get_match_data(&client->dev); - if (!data->chip_info) { - if (id) { - data->chip_info = &mma_chip_info_table[id->driver_data]; - } else { - dev_err(&client->dev, "unknown device model\n"); - return -ENODEV; - } - } + data->chip_info = i2c_get_match_data(client); + if (!data->chip_info) + return dev_err_probe(&client->dev, -ENODEV, + "unknown device model\n"); ret = iio_read_mount_matrix(&client->dev, &data->orientation); if (ret) @@ -1830,12 +1824,12 @@ static const struct dev_pm_ops mma8452_pm_ops = { }; static const struct i2c_device_id mma8452_id[] = { - { "mma8451", mma8451 }, - { "mma8452", mma8452 }, - { "mma8453", mma8453 }, - { "mma8652", mma8652 }, - { "mma8653", mma8653 }, - { "fxls8471", fxls8471 }, + { "fxls8471", (kernel_ulong_t)&mma_chip_info_table[fxls8471] }, + { "mma8451", (kernel_ulong_t)&mma_chip_info_table[mma8451] }, + { "mma8452", (kernel_ulong_t)&mma_chip_info_table[mma8452] }, + { "mma8453", (kernel_ulong_t)&mma_chip_info_table[mma8453] }, + { "mma8652", (kernel_ulong_t)&mma_chip_info_table[mma8652] }, + { "mma8653", (kernel_ulong_t)&mma_chip_info_table[mma8653] }, { } }; MODULE_DEVICE_TABLE(i2c, mma8452_id); diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c index 6ddcc3c2f8..b8ddbfd98f 100644 --- a/drivers/iio/accel/msa311.c +++ b/drivers/iio/accel/msa311.c @@ -33,7 +33,7 @@ #include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> -#include <linux/string_helpers.h> +#include <linux/string_choices.h> #include <linux/units.h> #include <linux/iio/buffer.h> diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c index 75d142bc14..82e8d0b390 100644 --- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -476,6 +476,13 @@ static const struct acpi_device_id mxc4005_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, mxc4005_acpi_match); +static const struct of_device_id mxc4005_of_match[] = { + { .compatible = "memsic,mxc4005", }, + { .compatible = "memsic,mxc6655", }, + { }, +}; +MODULE_DEVICE_TABLE(of, mxc4005_of_match); + static const struct i2c_device_id mxc4005_id[] = { {"mxc4005", 0}, {"mxc6655", 0}, @@ -487,6 +494,7 @@ static struct i2c_driver mxc4005_driver = { .driver = { .name = MXC4005_DRV_NAME, .acpi_match_table = ACPI_PTR(mxc4005_acpi_match), + .of_match_table = mxc4005_of_match, }, .probe = mxc4005_probe, .id_table = mxc4005_id, diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 517b3db114..35f9867da1 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -607,6 +607,16 @@ config LPC32XX_ADC activate only one via device tree selection. Provides direct access via sysfs. +config LTC2309 + tristate "Linear Technology LTC2309 ADC driver" + depends on I2C + help + Say yes here to build support for Linear Technology LTC2309, a low + noise, low power, 8-channel, 12-bit SAR ADC + + This driver can also be built as a module. If so, the module will + be called ltc2309. + config LTC2471 tristate "Linear Technology LTC2471 and LTC2473 ADC driver" depends on I2C @@ -779,14 +789,29 @@ config MCP3422 This driver can also be built as a module. If so, the module will be called mcp3422. +config MCP3564 + tristate "Microchip Technology MCP3461/2/4/R, MCP3561/2/4/R driver" + depends on SPI + depends on IIO + help + Say yes here to build support for Microchip Technology's MCP3461, + MCP3462, MCP3464, MCP3461R, MCP3462R, MCP3464R, MCP3561, MCP3562, + MCP3564, MCP3561R, MCP3562R and MCP3564R analog to digital + converters. + + This driver can also be built as a module. If so, the module will be + called mcp3564. + config MCP3911 tristate "Microchip Technology MCP3911 driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Microchip Technology's MCP3911 - analog to digital converter. + Say yes here to build support for one of the following + Microchip Technology's analog to digital converters: + MCP3910, MCP3911, MCP3912, MCP3913, MCP3914, + MCP3918 and MCP3919. This driver can also be built as a module. If so, the module will be called mcp3911. diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 2facf97932..bee11d442a 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_INTEL_MRFLD_ADC) += intel_mrfld_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o +obj-$(CONFIG_LTC2309) += ltc2309.o obj-$(CONFIG_LTC2471) += ltc2471.o obj-$(CONFIG_LTC2485) += ltc2485.o obj-$(CONFIG_LTC2496) += ltc2496.o ltc2497-core.o @@ -71,6 +72,7 @@ obj-$(CONFIG_MAX77541_ADC) += max77541-adc.o obj-$(CONFIG_MAX9611) += max9611.o obj-$(CONFIG_MCP320X) += mcp320x.o obj-$(CONFIG_MCP3422) += mcp3422.o +obj-$(CONFIG_MCP3564) += mcp3564.o obj-$(CONFIG_MCP3911) += mcp3911.o obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c index 3b1bdd0b53..80645fee79 100644 --- a/drivers/iio/adc/ab8500-gpadc.c +++ b/drivers/iio/adc/ab8500-gpadc.c @@ -1179,7 +1179,7 @@ out_dis_pm: return ret; } -static int ab8500_gpadc_remove(struct platform_device *pdev) +static void ab8500_gpadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct ab8500_gpadc *gpadc = iio_priv(indio_dev); @@ -1188,8 +1188,6 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) pm_runtime_put_noidle(gpadc->dev); pm_runtime_disable(gpadc->dev); regulator_disable(gpadc->vddadc); - - return 0; } static DEFINE_RUNTIME_DEV_PM_OPS(ab8500_gpadc_pm_ops, @@ -1198,7 +1196,7 @@ static DEFINE_RUNTIME_DEV_PM_OPS(ab8500_gpadc_pm_ops, static struct platform_driver ab8500_gpadc_driver = { .probe = ab8500_gpadc_probe, - .remove = ab8500_gpadc_remove, + .remove_new = ab8500_gpadc_remove, .driver = { .name = "ab8500-gpadc", .pm = pm_ptr(&ab8500_gpadc_pm_ops), diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c index 5a5dd5e87f..62490424b6 100644 --- a/drivers/iio/adc/ad4130.c +++ b/drivers/iio/adc/ad4130.c @@ -1817,18 +1817,12 @@ static const struct clk_ops ad4130_int_clk_ops = { .unprepare = ad4130_int_clk_unprepare, }; -static void ad4130_clk_del_provider(void *of_node) -{ - of_clk_del_provider(of_node); -} - static int ad4130_setup_int_clk(struct ad4130_state *st) { struct device *dev = &st->spi->dev; struct device_node *of_node = dev_of_node(dev); - struct clk_init_data init; + struct clk_init_data init = {}; const char *clk_name; - struct clk *clk; int ret; if (st->int_pin_sel == AD4130_INT_PIN_CLK || @@ -1845,15 +1839,12 @@ static int ad4130_setup_int_clk(struct ad4130_state *st) init.ops = &ad4130_int_clk_ops; st->int_clk_hw.init = &init; - clk = devm_clk_register(dev, &st->int_clk_hw); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - ret = of_clk_add_provider(of_node, of_clk_src_simple_get, clk); + ret = devm_clk_hw_register(dev, &st->int_clk_hw); if (ret) return ret; - return devm_add_action_or_reset(dev, ad4130_clk_del_provider, of_node); + return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &st->int_clk_hw); } static int ad4130_setup(struct iio_dev *indio_dev) @@ -1900,10 +1891,14 @@ static int ad4130_setup(struct iio_dev *indio_dev) return ret; /* - * Configure all GPIOs for output. If configured, the interrupt function - * of P2 takes priority over the GPIO out function. + * Configure unused GPIOs for output. If configured, the interrupt + * function of P2 takes priority over the GPIO out function. */ - val = AD4130_IO_CONTROL_GPIO_CTRL_MASK; + val = 0; + for (i = 0; i < AD4130_MAX_GPIOS; i++) + if (st->pins_fn[i + AD4130_AIN2_P1] == AD4130_PIN_FN_NONE) + val |= FIELD_PREP(AD4130_IO_CONTROL_GPIO_CTRL_MASK, BIT(i)); + val |= FIELD_PREP(AD4130_IO_CONTROL_INT_PIN_SEL_MASK, st->int_pin_sel); ret = regmap_write(st->regmap, AD4130_IO_CONTROL_REG, val); diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c index b64fd365f8..adc3cbe92d 100644 --- a/drivers/iio/adc/ad7192.c +++ b/drivers/iio/adc/ad7192.c @@ -6,6 +6,7 @@ */ #include <linux/interrupt.h> +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/device.h> #include <linux/kernel.h> @@ -43,7 +44,7 @@ #define AD7192_COMM_WEN BIT(7) /* Write Enable */ #define AD7192_COMM_WRITE 0 /* Write Operation */ #define AD7192_COMM_READ BIT(6) /* Read Operation */ -#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ +#define AD7192_COMM_ADDR_MASK GENMASK(5, 3) /* Register Address Mask */ #define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data Register */ /* Status Register Bit Designations (AD7192_REG_STAT) */ @@ -56,17 +57,18 @@ #define AD7192_STAT_CH1 BIT(0) /* Channel 1 */ /* Mode Register Bit Designations (AD7192_REG_MODE) */ -#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode Select */ -#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select Mask */ -#define AD7192_MODE_STA(x) (((x) & 0x1) << 20) /* Status Register transmission */ +#define AD7192_MODE_SEL_MASK GENMASK(23, 21) /* Operation Mode Select Mask */ #define AD7192_MODE_STA_MASK BIT(20) /* Status Register transmission Mask */ -#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ +#define AD7192_MODE_CLKSRC_MASK GENMASK(19, 18) /* Clock Source Select Mask */ +#define AD7192_MODE_AVG_MASK GENMASK(17, 16) + /* Fast Settling Filter Average Select Mask (AD7193 only) */ #define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ #define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ #define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/ #define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ #define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */ -#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate Select */ + /* Filter Update Rate Select Mask */ +#define AD7192_MODE_RATE_MASK GENMASK(9, 0) /* Mode Register: AD7192_MODE_SEL options */ #define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ @@ -92,13 +94,12 @@ #define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ #define AD7192_CONF_ACX BIT(22) /* AC excitation enable(AD7195 only) */ #define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ -#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ -#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ +#define AD7192_CONF_CHAN_MASK GENMASK(18, 8) /* Channel select mask */ #define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ #define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ #define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ #define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ -#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ +#define AD7192_CONF_GAIN_MASK GENMASK(2, 0) /* Gain Select */ #define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ #define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ @@ -130,7 +131,7 @@ #define CHIPID_AD7192 0x0 #define CHIPID_AD7193 0x2 #define CHIPID_AD7195 0x6 -#define AD7192_ID_MASK 0x0F +#define AD7192_ID_MASK GENMASK(3, 0) /* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ #define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch enable */ @@ -172,6 +173,9 @@ enum { struct ad7192_chip_info { unsigned int chip_id; const char *name; + const struct iio_chan_spec *channels; + u8 num_channels; + const struct iio_info *info; }; struct ad7192_state { @@ -181,10 +185,10 @@ struct ad7192_state { struct clk *mclk; u16 int_vref_mv; u32 fclk; - u32 f_order; u32 mode; u32 conf; u32 scale_avail[8][2]; + u32 oversampling_ratio_avail[4]; u8 gpocon; u8 clock_sel; struct mutex lock; /* protect sensor state */ @@ -273,7 +277,7 @@ static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel) struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); st->conf &= ~AD7192_CONF_CHAN_MASK; - st->conf |= AD7192_CONF_CHAN(channel); + st->conf |= FIELD_PREP(AD7192_CONF_CHAN_MASK, channel); return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); } @@ -284,7 +288,7 @@ static int ad7192_set_mode(struct ad_sigma_delta *sd, struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); st->mode &= ~AD7192_MODE_SEL_MASK; - st->mode |= AD7192_MODE_SEL(mode); + st->mode |= FIELD_PREP(AD7192_MODE_SEL_MASK, mode); return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); } @@ -296,7 +300,7 @@ static int ad7192_append_status(struct ad_sigma_delta *sd, bool append) int ret; mode &= ~AD7192_MODE_STA_MASK; - mode |= AD7192_MODE_STA(append); + mode |= FIELD_PREP(AD7192_MODE_STA_MASK, append); ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, mode); if (ret < 0) @@ -400,17 +404,17 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np) if (ret) return ret; - id &= AD7192_ID_MASK; + id = FIELD_GET(AD7192_ID_MASK, id); if (id != st->chip_info->chip_id) dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X != 0x%X)\n", id, st->chip_info->chip_id); - st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | - AD7192_MODE_CLKSRC(st->clock_sel) | - AD7192_MODE_RATE(480); + st->mode = FIELD_PREP(AD7192_MODE_SEL_MASK, AD7192_MODE_IDLE) | + FIELD_PREP(AD7192_MODE_CLKSRC_MASK, st->clock_sel) | + FIELD_PREP(AD7192_MODE_RATE_MASK, 480); - st->conf = AD7192_CONF_GAIN(0); + st->conf = FIELD_PREP(AD7192_CONF_GAIN_MASK, 0); rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); if (rej60_en) @@ -421,7 +425,6 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np) st->conf |= AD7192_CONF_REFSEL; st->conf &= ~AD7192_CONF_CHOP; - st->f_order = AD7192_NO_SYNC_FILTER; buf_en = of_property_read_bool(np, "adi,buffer-enable"); if (buf_en) @@ -456,13 +459,18 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np) for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { scale_uv = ((u64)st->int_vref_mv * 100000000) >> (indio_dev->channels[0].scan_type.realbits - - ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); + !FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf)); scale_uv >>= i; st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; st->scale_avail[i][0] = scale_uv; } + st->oversampling_ratio_avail[0] = 1; + st->oversampling_ratio_avail[1] = 2; + st->oversampling_ratio_avail[2] = 8; + st->oversampling_ratio_avail[3] = 16; + return 0; } @@ -473,7 +481,7 @@ static ssize_t ad7192_show_ac_excitation(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7192_state *st = iio_priv(indio_dev); - return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX)); + return sysfs_emit(buf, "%ld\n", FIELD_GET(AD7192_CONF_ACX, st->conf)); } static ssize_t ad7192_show_bridge_switch(struct device *dev, @@ -483,7 +491,8 @@ static ssize_t ad7192_show_bridge_switch(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7192_state *st = iio_priv(indio_dev); - return sysfs_emit(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); + return sysfs_emit(buf, "%ld\n", + FIELD_GET(AD7192_GPOCON_BPDSW, st->gpocon)); } static ssize_t ad7192_set(struct device *dev, @@ -531,22 +540,66 @@ static ssize_t ad7192_set(struct device *dev, return ret ? ret : len; } +static int ad7192_compute_f_order(struct ad7192_state *st, bool sinc3_en, bool chop_en) +{ + u8 avg_factor_selected, oversampling_ratio; + + avg_factor_selected = FIELD_GET(AD7192_MODE_AVG_MASK, st->mode); + + if (!avg_factor_selected && !chop_en) + return 1; + + oversampling_ratio = st->oversampling_ratio_avail[avg_factor_selected]; + + if (sinc3_en) + return AD7192_SYNC3_FILTER + oversampling_ratio - 1; + + return AD7192_SYNC4_FILTER + oversampling_ratio - 1; +} + +static int ad7192_get_f_order(struct ad7192_state *st) +{ + bool sinc3_en, chop_en; + + sinc3_en = FIELD_GET(AD7192_MODE_SINC3, st->mode); + chop_en = FIELD_GET(AD7192_CONF_CHOP, st->conf); + + return ad7192_compute_f_order(st, sinc3_en, chop_en); +} + +static int ad7192_compute_f_adc(struct ad7192_state *st, bool sinc3_en, + bool chop_en) +{ + unsigned int f_order = ad7192_compute_f_order(st, sinc3_en, chop_en); + + return DIV_ROUND_CLOSEST(st->fclk, + f_order * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode)); +} + +static int ad7192_get_f_adc(struct ad7192_state *st) +{ + unsigned int f_order = ad7192_get_f_order(st); + + return DIV_ROUND_CLOSEST(st->fclk, + f_order * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode)); +} + static void ad7192_get_available_filter_freq(struct ad7192_state *st, int *freq) { unsigned int fadc; /* Formulas for filter at page 25 of the datasheet */ - fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode)); + fadc = ad7192_compute_f_adc(st, false, true); freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); - fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode)); + fadc = ad7192_compute_f_adc(st, true, true); freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); - fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); + fadc = ad7192_compute_f_adc(st, false, false); freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024); + + fadc = ad7192_compute_f_adc(st, true, false); freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024); } @@ -629,25 +682,21 @@ static int ad7192_set_3db_filter_freq(struct ad7192_state *st, switch (idx) { case 0: - st->f_order = AD7192_SYNC4_FILTER; st->mode &= ~AD7192_MODE_SINC3; st->conf |= AD7192_CONF_CHOP; break; case 1: - st->f_order = AD7192_SYNC3_FILTER; st->mode |= AD7192_MODE_SINC3; st->conf |= AD7192_CONF_CHOP; break; case 2: - st->f_order = AD7192_NO_SYNC_FILTER; st->mode &= ~AD7192_MODE_SINC3; st->conf &= ~AD7192_CONF_CHOP; break; case 3: - st->f_order = AD7192_NO_SYNC_FILTER; st->mode |= AD7192_MODE_SINC3; st->conf &= ~AD7192_CONF_CHOP; @@ -665,12 +714,11 @@ static int ad7192_get_3db_filter_freq(struct ad7192_state *st) { unsigned int fadc; - fadc = DIV_ROUND_CLOSEST(st->fclk, - st->f_order * AD7192_MODE_RATE(st->mode)); + fadc = ad7192_get_f_adc(st); - if (st->conf & AD7192_CONF_CHOP) + if (FIELD_GET(AD7192_CONF_CHOP, st->conf)) return DIV_ROUND_CLOSEST(fadc * 240, 1024); - if (st->mode & AD7192_MODE_SINC3) + if (FIELD_GET(AD7192_MODE_SINC3, st->mode)) return DIV_ROUND_CLOSEST(fadc * 272, 1024); else return DIV_ROUND_CLOSEST(fadc * 230, 1024); @@ -683,7 +731,8 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, long m) { struct ad7192_state *st = iio_priv(indio_dev); - bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); + bool unipolar = FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf); + u8 gain = FIELD_GET(AD7192_CONF_GAIN_MASK, st->conf); switch (m) { case IIO_CHAN_INFO_RAW: @@ -692,8 +741,8 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_VOLTAGE: mutex_lock(&st->lock); - *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; - *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; + *val = st->scale_avail[gain][0]; + *val2 = st->scale_avail[gain][1]; mutex_unlock(&st->lock); return IIO_VAL_INT_PLUS_NANO; case IIO_TEMP: @@ -713,13 +762,15 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, *val -= 273 * ad7192_get_temp_scale(unipolar); return IIO_VAL_INT; case IIO_CHAN_INFO_SAMP_FREQ: - *val = st->fclk / - (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); + *val = DIV_ROUND_CLOSEST(ad7192_get_f_adc(st), 1024); return IIO_VAL_INT; case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: *val = ad7192_get_3db_filter_freq(st); *val2 = 1000; return IIO_VAL_FRACTIONAL; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = st->oversampling_ratio_avail[FIELD_GET(AD7192_MODE_AVG_MASK, st->mode)]; + return IIO_VAL_INT; } return -EINVAL; @@ -747,8 +798,8 @@ static int ad7192_write_raw(struct iio_dev *indio_dev, if (val2 == st->scale_avail[i][1]) { ret = 0; tmp = st->conf; - st->conf &= ~AD7192_CONF_GAIN(-1); - st->conf |= AD7192_CONF_GAIN(i); + st->conf &= ~AD7192_CONF_GAIN_MASK; + st->conf |= FIELD_PREP(AD7192_CONF_GAIN_MASK, i); if (tmp == st->conf) break; ad_sd_write_reg(&st->sd, AD7192_REG_CONF, @@ -764,19 +815,36 @@ static int ad7192_write_raw(struct iio_dev *indio_dev, break; } - div = st->fclk / (val * st->f_order * 1024); + div = st->fclk / (val * ad7192_get_f_order(st) * 1024); if (div < 1 || div > 1023) { ret = -EINVAL; break; } - st->mode &= ~AD7192_MODE_RATE(-1); - st->mode |= AD7192_MODE_RATE(div); + st->mode &= ~AD7192_MODE_RATE_MASK; + st->mode |= FIELD_PREP(AD7192_MODE_RATE_MASK, div); ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); break; case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000); break; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = -EINVAL; + mutex_lock(&st->lock); + for (i = 0; i < ARRAY_SIZE(st->oversampling_ratio_avail); i++) + if (val == st->oversampling_ratio_avail[i]) { + ret = 0; + tmp = st->mode; + st->mode &= ~AD7192_MODE_AVG_MASK; + st->mode |= FIELD_PREP(AD7192_MODE_AVG_MASK, i); + if (tmp == st->mode) + break; + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, + 3, st->mode); + break; + } + mutex_unlock(&st->lock); + break; default: ret = -EINVAL; } @@ -797,6 +865,8 @@ static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + return IIO_VAL_INT; default: return -EINVAL; } @@ -817,6 +887,12 @@ static int ad7192_read_avail(struct iio_dev *indio_dev, *length = ARRAY_SIZE(st->scale_avail) * 2; return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = (int *)st->oversampling_ratio_avail; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(st->oversampling_ratio_avail); + + return IIO_AVAIL_LIST; } return -EINVAL; @@ -831,7 +907,7 @@ static int ad7192_update_scan_mode(struct iio_dev *indio_dev, const unsigned lon conf &= ~AD7192_CONF_CHAN_MASK; for_each_set_bit(i, scan_mask, 8) - conf |= AD7192_CONF_CHAN(i); + conf |= FIELD_PREP(AD7192_CONF_CHAN_MASK, i); ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, conf); if (ret < 0) @@ -862,8 +938,8 @@ static const struct iio_info ad7195_info = { .update_scan_mode = ad7192_update_scan_mode, }; -#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \ - _type, _mask_type_av, _ext_info) \ +#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _type, \ + _mask_all, _mask_type_av, _mask_all_av, _ext_info) \ { \ .type = (_type), \ .differential = ((_channel2) == -1 ? 0 : 1), \ @@ -871,13 +947,14 @@ static const struct iio_info ad7195_info = { .channel = (_channel1), \ .channel2 = (_channel2), \ .address = (_address), \ - .extend_name = (_extend_name), \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_OFFSET), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ - BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \ + (_mask_all), \ .info_mask_shared_by_type_available = (_mask_type_av), \ + .info_mask_shared_by_all_available = (_mask_all_av), \ .ext_info = (_ext_info), \ .scan_index = (_si), \ .scan_type = { \ @@ -889,16 +966,26 @@ static const struct iio_info ad7195_info = { } #define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ - __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \ - IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \ - ad7192_calibsys_ext_info) + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, IIO_VOLTAGE, 0, \ + BIT(IIO_CHAN_INFO_SCALE), 0, ad7192_calibsys_ext_info) #define AD719x_CHANNEL(_si, _channel1, _address) \ - __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \ - BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) + __AD719x_CHANNEL(_si, _channel1, -1, _address, IIO_VOLTAGE, 0, \ + BIT(IIO_CHAN_INFO_SCALE), 0, ad7192_calibsys_ext_info) #define AD719x_TEMP_CHANNEL(_si, _address) \ - __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL) + __AD719x_CHANNEL(_si, 0, -1, _address, IIO_TEMP, 0, 0, 0, NULL) + +#define AD7193_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, \ + IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + BIT(IIO_CHAN_INFO_SCALE), \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + ad7192_calibsys_ext_info) + +#define AD7193_CHANNEL(_si, _channel1, _address) \ + AD7193_DIFF_CHANNEL(_si, _channel1, -1, _address) static const struct iio_chan_spec ad7192_channels[] = { AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M), @@ -913,20 +1000,20 @@ static const struct iio_chan_spec ad7192_channels[] = { }; static const struct iio_chan_spec ad7193_channels[] = { - AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), - AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), - AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), - AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), + AD7193_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), + AD7193_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), + AD7193_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), + AD7193_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP), - AD719x_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M), - AD719x_CHANNEL(6, 1, AD7193_CH_AIN1), - AD719x_CHANNEL(7, 2, AD7193_CH_AIN2), - AD719x_CHANNEL(8, 3, AD7193_CH_AIN3), - AD719x_CHANNEL(9, 4, AD7193_CH_AIN4), - AD719x_CHANNEL(10, 5, AD7193_CH_AIN5), - AD719x_CHANNEL(11, 6, AD7193_CH_AIN6), - AD719x_CHANNEL(12, 7, AD7193_CH_AIN7), - AD719x_CHANNEL(13, 8, AD7193_CH_AIN8), + AD7193_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M), + AD7193_CHANNEL(6, 1, AD7193_CH_AIN1), + AD7193_CHANNEL(7, 2, AD7193_CH_AIN2), + AD7193_CHANNEL(8, 3, AD7193_CH_AIN3), + AD7193_CHANNEL(9, 4, AD7193_CH_AIN4), + AD7193_CHANNEL(10, 5, AD7193_CH_AIN5), + AD7193_CHANNEL(11, 6, AD7193_CH_AIN6), + AD7193_CHANNEL(12, 7, AD7193_CH_AIN7), + AD7193_CHANNEL(13, 8, AD7193_CH_AIN8), IIO_CHAN_SOFT_TIMESTAMP(14), }; @@ -934,39 +1021,33 @@ static const struct ad7192_chip_info ad7192_chip_info_tbl[] = { [ID_AD7190] = { .chip_id = CHIPID_AD7190, .name = "ad7190", + .channels = ad7192_channels, + .num_channels = ARRAY_SIZE(ad7192_channels), + .info = &ad7192_info, }, [ID_AD7192] = { .chip_id = CHIPID_AD7192, .name = "ad7192", + .channels = ad7192_channels, + .num_channels = ARRAY_SIZE(ad7192_channels), + .info = &ad7192_info, }, [ID_AD7193] = { .chip_id = CHIPID_AD7193, .name = "ad7193", + .channels = ad7193_channels, + .num_channels = ARRAY_SIZE(ad7193_channels), + .info = &ad7192_info, }, [ID_AD7195] = { .chip_id = CHIPID_AD7195, .name = "ad7195", + .channels = ad7192_channels, + .num_channels = ARRAY_SIZE(ad7192_channels), + .info = &ad7195_info, }, }; -static int ad7192_channels_config(struct iio_dev *indio_dev) -{ - struct ad7192_state *st = iio_priv(indio_dev); - - switch (st->chip_info->chip_id) { - case CHIPID_AD7193: - indio_dev->channels = ad7193_channels; - indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); - break; - default: - indio_dev->channels = ad7192_channels; - indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); - break; - } - - return 0; -} - static void ad7192_reg_disable(void *reg) { regulator_disable(reg); @@ -1041,15 +1122,9 @@ static int ad7192_probe(struct spi_device *spi) st->chip_info = (void *)spi_get_device_id(spi)->driver_data; indio_dev->name = st->chip_info->name; indio_dev->modes = INDIO_DIRECT_MODE; - - ret = ad7192_channels_config(indio_dev); - if (ret < 0) - return ret; - - if (st->chip_info->chip_id == CHIPID_AD7195) - indio_dev->info = &ad7195_info; - else - indio_dev->info = &ad7192_info; + indio_dev->channels = st->chip_info->channels; + indio_dev->num_channels = st->chip_info->num_channels; + indio_dev->info = st->chip_info->info; ret = ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info); if (ret) diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index df67b63ccf..d7fd21e7c6 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -2486,7 +2486,7 @@ reg_disable: return ret; } -static int at91_adc_remove(struct platform_device *pdev) +static void at91_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct at91_adc_state *st = iio_priv(indio_dev); @@ -2501,8 +2501,6 @@ static int at91_adc_remove(struct platform_device *pdev) regulator_disable(st->vref); regulator_disable(st->reg); - - return 0; } static int at91_adc_suspend(struct device *dev) @@ -2627,7 +2625,7 @@ MODULE_DEVICE_TABLE(of, at91_adc_dt_match); static struct platform_driver at91_adc_driver = { .probe = at91_adc_probe, - .remove = at91_adc_remove, + .remove_new = at91_adc_remove, .driver = { .name = "at91-sama5d2_adc", .of_match_table = at91_adc_dt_match, diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index de6650f9c4..eb501e3c86 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -1013,28 +1013,25 @@ static int at91_adc_probe(struct platform_device *pdev) st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers"); - if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) { - dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n"); - return -EINVAL; - } + if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) + return dev_err_probe(&idev->dev, -EINVAL, + "Missing adc-channels-used property in the DT.\n"); st->channels_mask = prop; st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode"); - if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) { - dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n"); - return -EINVAL; - } + if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) + return dev_err_probe(&idev->dev, -EINVAL, + "Missing adc-startup-time property in the DT.\n"); st->startup_time = prop; prop = 0; of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop); st->sample_hold_time = prop; - if (of_property_read_u32(node, "atmel,adc-vref", &prop)) { - dev_err(&idev->dev, "Missing adc-vref property in the DT.\n"); - return -EINVAL; - } + if (of_property_read_u32(node, "atmel,adc-vref", &prop)) + return dev_err_probe(&idev->dev, -EINVAL, + "Missing adc-vref property in the DT.\n"); st->vref_mv = prop; st->res = st->caps->high_res_bits; @@ -1069,7 +1066,6 @@ static int at91_adc_probe(struct platform_device *pdev) if (IS_ERR(st->reg_base)) return PTR_ERR(st->reg_base); - /* * Disable all IRQs before setting up the handler */ @@ -1077,43 +1073,26 @@ static int at91_adc_probe(struct platform_device *pdev) at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF); if (st->caps->has_tsmr) - ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0, - pdev->dev.driver->name, idev); + ret = devm_request_irq(&pdev->dev, st->irq, + at91_adc_9x5_interrupt, 0, + pdev->dev.driver->name, idev); else - ret = request_irq(st->irq, at91_adc_rl_interrupt, 0, - pdev->dev.driver->name, idev); - if (ret) { - dev_err(&pdev->dev, "Failed to allocate IRQ.\n"); - return ret; - } - - st->clk = devm_clk_get(&pdev->dev, "adc_clk"); - if (IS_ERR(st->clk)) { - dev_err(&pdev->dev, "Failed to get the clock.\n"); - ret = PTR_ERR(st->clk); - goto error_free_irq; - } - - ret = clk_prepare_enable(st->clk); - if (ret) { - dev_err(&pdev->dev, - "Could not prepare or enable the clock.\n"); - goto error_free_irq; - } + ret = devm_request_irq(&pdev->dev, st->irq, + at91_adc_rl_interrupt, 0, + pdev->dev.driver->name, idev); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "Failed to allocate IRQ.\n"); - st->adc_clk = devm_clk_get(&pdev->dev, "adc_op_clk"); - if (IS_ERR(st->adc_clk)) { - dev_err(&pdev->dev, "Failed to get the ADC clock.\n"); - ret = PTR_ERR(st->adc_clk); - goto error_disable_clk; - } + st->clk = devm_clk_get_enabled(&pdev->dev, "adc_clk"); + if (IS_ERR(st->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(st->clk), + "Could not prepare or enable the clock.\n"); - ret = clk_prepare_enable(st->adc_clk); - if (ret) { - dev_err(&pdev->dev, - "Could not prepare or enable the ADC clock.\n"); - goto error_disable_clk; - } + st->adc_clk = devm_clk_get_enabled(&pdev->dev, "adc_op_clk"); + if (IS_ERR(st->adc_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(st->adc_clk), + "Could not prepare or enable the ADC clock.\n"); /* * Prescaler rate computation using the formula from the Atmel's @@ -1129,11 +1108,9 @@ static int at91_adc_probe(struct platform_device *pdev) prsc = (mstrclk / (2 * adc_clk)) - 1; - if (!st->startup_time) { - dev_err(&pdev->dev, "No startup time available.\n"); - ret = -EINVAL; - goto error_disable_adc_clk; - } + if (!st->startup_time) + return dev_err_probe(&pdev->dev, -EINVAL, + "No startup time available.\n"); ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz); /* @@ -1158,10 +1135,9 @@ static int at91_adc_probe(struct platform_device *pdev) /* Setup the ADC channels available on the board */ ret = at91_adc_channel_init(idev); - if (ret < 0) { - dev_err(&pdev->dev, "Couldn't initialize the channels.\n"); - goto error_disable_adc_clk; - } + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Couldn't initialize the channels.\n"); init_waitqueue_head(&st->wq_data_avail); mutex_init(&st->lock); @@ -1173,21 +1149,20 @@ static int at91_adc_probe(struct platform_device *pdev) */ if (!st->touchscreen_type) { ret = at91_adc_buffer_init(idev); - if (ret < 0) { - dev_err(&pdev->dev, "Couldn't initialize the buffer.\n"); - goto error_disable_adc_clk; - } + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Couldn't initialize the buffer.\n"); ret = at91_adc_trigger_init(idev); if (ret < 0) { dev_err(&pdev->dev, "Couldn't setup the triggers.\n"); at91_adc_buffer_remove(idev); - goto error_disable_adc_clk; + return ret; } } else { ret = at91_ts_register(idev, pdev); if (ret) - goto error_disable_adc_clk; + return ret; at91_ts_hw_init(idev, adc_clk_khz); } @@ -1207,16 +1182,10 @@ error_iio_device_register: } else { at91_ts_unregister(st); } -error_disable_adc_clk: - clk_disable_unprepare(st->adc_clk); -error_disable_clk: - clk_disable_unprepare(st->clk); -error_free_irq: - free_irq(st->irq, idev); return ret; } -static int at91_adc_remove(struct platform_device *pdev) +static void at91_adc_remove(struct platform_device *pdev) { struct iio_dev *idev = platform_get_drvdata(pdev); struct at91_adc_state *st = iio_priv(idev); @@ -1228,11 +1197,6 @@ static int at91_adc_remove(struct platform_device *pdev) } else { at91_ts_unregister(st); } - clk_disable_unprepare(st->adc_clk); - clk_disable_unprepare(st->clk); - free_irq(st->irq, idev); - - return 0; } static int at91_adc_suspend(struct device *dev) @@ -1382,7 +1346,7 @@ MODULE_DEVICE_TABLE(of, at91_adc_dt_ids); static struct platform_driver at91_adc_driver = { .probe = at91_adc_probe, - .remove = at91_adc_remove, + .remove_new = at91_adc_remove, .driver = { .name = DRIVER_NAME, .of_match_table = at91_adc_dt_ids, diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c index 75bda94dbc..d6c51b0f48 100644 --- a/drivers/iio/adc/axp20x_adc.c +++ b/drivers/iio/adc/axp20x_adc.c @@ -745,7 +745,7 @@ fail_map: return ret; } -static int axp20x_remove(struct platform_device *pdev) +static void axp20x_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct axp20x_adc_iio *info = iio_priv(indio_dev); @@ -757,8 +757,6 @@ static int axp20x_remove(struct platform_device *pdev) if (info->data->adc_en2_mask) regmap_write(info->regmap, AXP20X_ADC_EN2, 0); - - return 0; } static struct platform_driver axp20x_adc_driver = { @@ -768,7 +766,7 @@ static struct platform_driver axp20x_adc_driver = { }, .id_table = axp20x_adc_id_match, .probe = axp20x_probe, - .remove = axp20x_remove, + .remove_new = axp20x_remove, }; module_platform_driver(axp20x_adc_driver); diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c index 0d6885413a..5bc514bd5e 100644 --- a/drivers/iio/adc/bcm_iproc_adc.c +++ b/drivers/iio/adc/bcm_iproc_adc.c @@ -594,7 +594,7 @@ err_adc_enable: return ret; } -static int iproc_adc_remove(struct platform_device *pdev) +static void iproc_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct iproc_adc_priv *adc_priv = iio_priv(indio_dev); @@ -602,8 +602,6 @@ static int iproc_adc_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); iproc_adc_disable(indio_dev); clk_disable_unprepare(adc_priv->adc_clk); - - return 0; } static const struct of_device_id iproc_adc_of_match[] = { @@ -614,7 +612,7 @@ MODULE_DEVICE_TABLE(of, iproc_adc_of_match); static struct platform_driver iproc_adc_driver = { .probe = iproc_adc_probe, - .remove = iproc_adc_remove, + .remove_new = iproc_adc_remove, .driver = { .name = "iproc-static-adc", .of_match_table = iproc_adc_of_match, diff --git a/drivers/iio/adc/dln2-adc.c b/drivers/iio/adc/dln2-adc.c index 97d162a3cb..06cfbbabaf 100644 --- a/drivers/iio/adc/dln2-adc.c +++ b/drivers/iio/adc/dln2-adc.c @@ -691,19 +691,18 @@ unregister_event: return ret; } -static int dln2_adc_remove(struct platform_device *pdev) +static void dln2_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); iio_device_unregister(indio_dev); dln2_unregister_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV); - return 0; } static struct platform_driver dln2_adc_driver = { .driver.name = DLN2_ADC_MOD_NAME, .probe = dln2_adc_probe, - .remove = dln2_adc_remove, + .remove_new = dln2_adc_remove, }; module_platform_driver(dln2_adc_driver); diff --git a/drivers/iio/adc/ep93xx_adc.c b/drivers/iio/adc/ep93xx_adc.c index a35e6cead6..971942ce4c 100644 --- a/drivers/iio/adc/ep93xx_adc.c +++ b/drivers/iio/adc/ep93xx_adc.c @@ -217,15 +217,13 @@ static int ep93xx_adc_probe(struct platform_device *pdev) return ret; } -static int ep93xx_adc_remove(struct platform_device *pdev) +static void ep93xx_adc_remove(struct platform_device *pdev) { struct iio_dev *iiodev = platform_get_drvdata(pdev); struct ep93xx_adc_priv *priv = iio_priv(iiodev); iio_device_unregister(iiodev); clk_disable_unprepare(priv->clk); - - return 0; } static const struct of_device_id ep93xx_adc_of_ids[] = { @@ -240,7 +238,7 @@ static struct platform_driver ep93xx_adc_driver = { .of_match_table = ep93xx_adc_of_ids, }, .probe = ep93xx_adc_probe, - .remove = ep93xx_adc_remove, + .remove_new = ep93xx_adc_remove, }; module_platform_driver(ep93xx_adc_driver); diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index 43c8af41b4..614de96448 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -950,7 +950,7 @@ err_disable_reg: return ret; } -static int exynos_adc_remove(struct platform_device *pdev) +static void exynos_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct exynos_adc *info = iio_priv(indio_dev); @@ -968,8 +968,6 @@ static int exynos_adc_remove(struct platform_device *pdev) exynos_adc_disable_clk(info); exynos_adc_unprepare_clk(info); regulator_disable(info->vdd); - - return 0; } static int exynos_adc_suspend(struct device *dev) @@ -1010,7 +1008,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, exynos_adc_suspend, static struct platform_driver exynos_adc_driver = { .probe = exynos_adc_probe, - .remove = exynos_adc_remove, + .remove_new = exynos_adc_remove, .driver = { .name = "exynos-adc", .of_match_table = exynos_adc_match, diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c index 551e83ae57..68c813de06 100644 --- a/drivers/iio/adc/fsl-imx25-gcq.c +++ b/drivers/iio/adc/fsl-imx25-gcq.c @@ -384,7 +384,7 @@ err_regulator_disable: return ret; } -static int mx25_gcq_remove(struct platform_device *pdev) +static void mx25_gcq_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct mx25_gcq_priv *priv = iio_priv(indio_dev); @@ -397,8 +397,6 @@ static int mx25_gcq_remove(struct platform_device *pdev) if (priv->vref[i]) regulator_disable(priv->vref[i]); } - - return 0; } static const struct of_device_id mx25_gcq_ids[] = { @@ -413,7 +411,7 @@ static struct platform_driver mx25_gcq_driver = { .of_match_table = mx25_gcq_ids, }, .probe = mx25_gcq_probe, - .remove = mx25_gcq_remove, + .remove_new = mx25_gcq_remove, }; module_platform_driver(mx25_gcq_driver); diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c index f7ee856a6b..c80c55fb8c 100644 --- a/drivers/iio/adc/hx711.c +++ b/drivers/iio/adc/hx711.c @@ -580,7 +580,7 @@ error_regulator: return ret; } -static int hx711_remove(struct platform_device *pdev) +static void hx711_remove(struct platform_device *pdev) { struct hx711_data *hx711_data; struct iio_dev *indio_dev; @@ -593,8 +593,6 @@ static int hx711_remove(struct platform_device *pdev) iio_triggered_buffer_cleanup(indio_dev); regulator_disable(hx711_data->reg_avdd); - - return 0; } static const struct of_device_id of_hx711_match[] = { @@ -606,7 +604,7 @@ MODULE_DEVICE_TABLE(of, of_hx711_match); static struct platform_driver hx711_driver = { .probe = hx711_probe, - .remove = hx711_remove, + .remove_new = hx711_remove, .driver = { .name = "hx711-gpio", .of_match_table = of_hx711_match, diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c index fff6e5a2d9..fe82198170 100644 --- a/drivers/iio/adc/imx8qxp-adc.c +++ b/drivers/iio/adc/imx8qxp-adc.c @@ -404,7 +404,7 @@ error_regulator_disable: return ret; } -static int imx8qxp_adc_remove(struct platform_device *pdev) +static void imx8qxp_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct imx8qxp_adc *adc = iio_priv(indio_dev); @@ -422,8 +422,6 @@ static int imx8qxp_adc_remove(struct platform_device *pdev) pm_runtime_disable(dev); pm_runtime_put_noidle(dev); - - return 0; } static int imx8qxp_adc_runtime_suspend(struct device *dev) @@ -489,7 +487,7 @@ MODULE_DEVICE_TABLE(of, imx8qxp_adc_match); static struct platform_driver imx8qxp_adc_driver = { .probe = imx8qxp_adc_probe, - .remove = imx8qxp_adc_remove, + .remove_new = imx8qxp_adc_remove, .driver = { .name = ADC_DRIVER_NAME, .of_match_table = imx8qxp_adc_match, diff --git a/drivers/iio/adc/imx93_adc.c b/drivers/iio/adc/imx93_adc.c index 512d7b95b0..4ccf4819f1 100644 --- a/drivers/iio/adc/imx93_adc.c +++ b/drivers/iio/adc/imx93_adc.c @@ -396,7 +396,7 @@ error_regulator_disable: return ret; } -static int imx93_adc_remove(struct platform_device *pdev) +static void imx93_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct imx93_adc *adc = iio_priv(indio_dev); @@ -414,8 +414,6 @@ static int imx93_adc_remove(struct platform_device *pdev) free_irq(adc->irq, adc); clk_disable_unprepare(adc->ipg_clk); regulator_disable(adc->vref); - - return 0; } static int imx93_adc_runtime_suspend(struct device *dev) @@ -472,7 +470,7 @@ MODULE_DEVICE_TABLE(of, imx93_adc_match); static struct platform_driver imx93_adc_driver = { .probe = imx93_adc_probe, - .remove = imx93_adc_remove, + .remove_new = imx93_adc_remove, .driver = { .name = IMX93_ADC_DRIVER_NAME, .of_match_table = imx93_adc_match, diff --git a/drivers/iio/adc/ltc2309.c b/drivers/iio/adc/ltc2309.c new file mode 100644 index 0000000000..8b3a89c1b8 --- /dev/null +++ b/drivers/iio/adc/ltc2309.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * The LTC2309 is an 8-Channel, 12-Bit SAR ADC with an I2C Interface. + * + * Datasheet: + * https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf + * + * Copyright (c) 2023, Liam Beguin <liambeguin@gmail.com> + */ +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regulator/consumer.h> + +#define LTC2309_ADC_RESOLUTION 12 + +#define LTC2309_DIN_CH_MASK GENMASK(7, 4) +#define LTC2309_DIN_SDN BIT(7) +#define LTC2309_DIN_OSN BIT(6) +#define LTC2309_DIN_S1 BIT(5) +#define LTC2309_DIN_S0 BIT(4) +#define LTC2309_DIN_UNI BIT(3) +#define LTC2309_DIN_SLEEP BIT(2) + +/** + * struct ltc2309 - internal device data structure + * @dev: Device reference + * @client: I2C reference + * @vref: External reference source + * @lock: Lock to serialize data access + * @vref_mv: Internal voltage reference + */ +struct ltc2309 { + struct device *dev; + struct i2c_client *client; + struct regulator *vref; + struct mutex lock; /* serialize data access */ + int vref_mv; +}; + +/* Order matches expected channel address, See datasheet Table 1. */ +enum ltc2309_channels { + LTC2309_CH0_CH1 = 0, + LTC2309_CH2_CH3, + LTC2309_CH4_CH5, + LTC2309_CH6_CH7, + LTC2309_CH1_CH0, + LTC2309_CH3_CH2, + LTC2309_CH5_CH4, + LTC2309_CH7_CH6, + LTC2309_CH0, + LTC2309_CH2, + LTC2309_CH4, + LTC2309_CH6, + LTC2309_CH1, + LTC2309_CH3, + LTC2309_CH5, + LTC2309_CH7, +}; + +#define LTC2309_CHAN(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +#define LTC2309_DIFF_CHAN(_chan, _chan2, _addr) { \ + .type = IIO_VOLTAGE, \ + .differential = 1, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .channel2 = _chan2, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec ltc2309_channels[] = { + LTC2309_CHAN(0, LTC2309_CH0), + LTC2309_CHAN(1, LTC2309_CH1), + LTC2309_CHAN(2, LTC2309_CH2), + LTC2309_CHAN(3, LTC2309_CH3), + LTC2309_CHAN(4, LTC2309_CH4), + LTC2309_CHAN(5, LTC2309_CH5), + LTC2309_CHAN(6, LTC2309_CH6), + LTC2309_CHAN(7, LTC2309_CH7), + LTC2309_DIFF_CHAN(0, 1, LTC2309_CH0_CH1), + LTC2309_DIFF_CHAN(2, 3, LTC2309_CH2_CH3), + LTC2309_DIFF_CHAN(4, 5, LTC2309_CH4_CH5), + LTC2309_DIFF_CHAN(6, 7, LTC2309_CH6_CH7), + LTC2309_DIFF_CHAN(1, 0, LTC2309_CH1_CH0), + LTC2309_DIFF_CHAN(3, 2, LTC2309_CH3_CH2), + LTC2309_DIFF_CHAN(5, 4, LTC2309_CH5_CH4), + LTC2309_DIFF_CHAN(7, 6, LTC2309_CH7_CH6), +}; + +static int ltc2309_read_raw_channel(struct ltc2309 *ltc2309, + unsigned long address, int *val) +{ + int ret; + u16 buf; + u8 din; + + din = FIELD_PREP(LTC2309_DIN_CH_MASK, address & 0x0f) | + FIELD_PREP(LTC2309_DIN_UNI, 1) | + FIELD_PREP(LTC2309_DIN_SLEEP, 0); + + ret = i2c_smbus_write_byte(ltc2309->client, din); + if (ret < 0) { + dev_err(ltc2309->dev, "i2c command failed: %pe\n", + ERR_PTR(ret)); + return ret; + } + + ret = i2c_master_recv(ltc2309->client, (char *)&buf, 2); + if (ret < 0) { + dev_err(ltc2309->dev, "i2c read failed: %pe\n", ERR_PTR(ret)); + return ret; + } + + *val = be16_to_cpu(buf) >> 4; + + return ret; +} + +static int ltc2309_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct ltc2309 *ltc2309 = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(<c2309->lock); + ret = ltc2309_read_raw_channel(ltc2309, chan->address, val); + mutex_unlock(<c2309->lock); + if (ret < 0) + return -EINVAL; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = ltc2309->vref_mv; + *val2 = LTC2309_ADC_RESOLUTION; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static const struct iio_info ltc2309_info = { + .read_raw = ltc2309_read_raw, +}; + +static void ltc2309_regulator_disable(void *regulator) +{ + regulator_disable(regulator); +} + +static int ltc2309_probe(struct i2c_client *client) +{ + struct iio_dev *indio_dev; + struct ltc2309 *ltc2309; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*ltc2309)); + if (!indio_dev) + return -ENOMEM; + + ltc2309 = iio_priv(indio_dev); + ltc2309->dev = &indio_dev->dev; + ltc2309->client = client; + ltc2309->vref_mv = 4096; /* Default to the internal ref */ + + indio_dev->name = "ltc2309"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ltc2309_channels; + indio_dev->num_channels = ARRAY_SIZE(ltc2309_channels); + indio_dev->info = <c2309_info; + + ltc2309->vref = devm_regulator_get_optional(&client->dev, "vref"); + if (IS_ERR(ltc2309->vref)) { + ret = PTR_ERR(ltc2309->vref); + if (ret == -ENODEV) + ltc2309->vref = NULL; + else + return ret; + } + + if (ltc2309->vref) { + ret = regulator_enable(ltc2309->vref); + if (ret) + return dev_err_probe(ltc2309->dev, ret, + "failed to enable vref\n"); + + ret = devm_add_action_or_reset(ltc2309->dev, + ltc2309_regulator_disable, + ltc2309->vref); + if (ret) { + return dev_err_probe(ltc2309->dev, ret, + "failed to add regulator_disable action: %d\n", + ret); + } + + ret = regulator_get_voltage(ltc2309->vref); + if (ret < 0) + return ret; + + ltc2309->vref_mv = ret / 1000; + } + + mutex_init(<c2309->lock); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct of_device_id ltc2309_of_match[] = { + { .compatible = "lltc,ltc2309" }, + { } +}; +MODULE_DEVICE_TABLE(of, ltc2309_of_match); + +static const struct i2c_device_id ltc2309_id[] = { + { "ltc2309" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc2309_id); + +static struct i2c_driver ltc2309_driver = { + .driver = { + .name = "ltc2309", + .of_match_table = ltc2309_of_match, + }, + .probe = ltc2309_probe, + .id_table = ltc2309_id, +}; +module_i2c_driver(ltc2309_driver); + +MODULE_AUTHOR("Liam Beguin <liambeguin@gmail.com>"); +MODULE_DESCRIPTION("Linear Technology LTC2309 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c index 5bdd407296..6401a7727c 100644 --- a/drivers/iio/adc/ltc2497.c +++ b/drivers/iio/adc/ltc2497.c @@ -95,7 +95,6 @@ static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata, static int ltc2497_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); const struct ltc2497_chip_info *chip_info; struct iio_dev *indio_dev; struct ltc2497_driverdata *st; @@ -115,9 +114,7 @@ static int ltc2497_probe(struct i2c_client *client) st->client = client; st->common_ddata.result_and_measure = ltc2497_result_and_measure; - chip_info = device_get_match_data(dev); - if (!chip_info) - chip_info = (const struct ltc2497_chip_info *)id->driver_data; + chip_info = i2c_get_match_data(client); st->common_ddata.chip_info = chip_info; resolution = chip_info->resolution; diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index b31581616c..7c2a98b8c3 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -1599,9 +1599,7 @@ static int max1363_probe(struct i2c_client *client) if (ret) return ret; - st->chip_info = device_get_match_data(&client->dev); - if (!st->chip_info) - st->chip_info = &max1363_chip_info_tbl[id->driver_data]; + st->chip_info = i2c_get_match_data(client); st->client = client; st->vref_uv = st->chip_info->int_vref_mv * 1000; @@ -1669,46 +1667,51 @@ static int max1363_probe(struct i2c_client *client) return devm_iio_device_register(&client->dev, indio_dev); } +#define MAX1363_ID_TABLE(_name, cfg) { \ + .name = _name, \ + .driver_data = (kernel_ulong_t)&max1363_chip_info_tbl[cfg], \ +} + static const struct i2c_device_id max1363_id[] = { - { "max1361", max1361 }, - { "max1362", max1362 }, - { "max1363", max1363 }, - { "max1364", max1364 }, - { "max1036", max1036 }, - { "max1037", max1037 }, - { "max1038", max1038 }, - { "max1039", max1039 }, - { "max1136", max1136 }, - { "max1137", max1137 }, - { "max1138", max1138 }, - { "max1139", max1139 }, - { "max1236", max1236 }, - { "max1237", max1237 }, - { "max1238", max1238 }, - { "max1239", max1239 }, - { "max11600", max11600 }, - { "max11601", max11601 }, - { "max11602", max11602 }, - { "max11603", max11603 }, - { "max11604", max11604 }, - { "max11605", max11605 }, - { "max11606", max11606 }, - { "max11607", max11607 }, - { "max11608", max11608 }, - { "max11609", max11609 }, - { "max11610", max11610 }, - { "max11611", max11611 }, - { "max11612", max11612 }, - { "max11613", max11613 }, - { "max11614", max11614 }, - { "max11615", max11615 }, - { "max11616", max11616 }, - { "max11617", max11617 }, - { "max11644", max11644 }, - { "max11645", max11645 }, - { "max11646", max11646 }, - { "max11647", max11647 }, - {} + MAX1363_ID_TABLE("max1361", max1361), + MAX1363_ID_TABLE("max1362", max1362), + MAX1363_ID_TABLE("max1363", max1363), + MAX1363_ID_TABLE("max1364", max1364), + MAX1363_ID_TABLE("max1036", max1036), + MAX1363_ID_TABLE("max1037", max1037), + MAX1363_ID_TABLE("max1038", max1038), + MAX1363_ID_TABLE("max1039", max1039), + MAX1363_ID_TABLE("max1136", max1136), + MAX1363_ID_TABLE("max1137", max1137), + MAX1363_ID_TABLE("max1138", max1138), + MAX1363_ID_TABLE("max1139", max1139), + MAX1363_ID_TABLE("max1236", max1236), + MAX1363_ID_TABLE("max1237", max1237), + MAX1363_ID_TABLE("max1238", max1238), + MAX1363_ID_TABLE("max1239", max1239), + MAX1363_ID_TABLE("max11600", max11600), + MAX1363_ID_TABLE("max11601", max11601), + MAX1363_ID_TABLE("max11602", max11602), + MAX1363_ID_TABLE("max11603", max11603), + MAX1363_ID_TABLE("max11604", max11604), + MAX1363_ID_TABLE("max11605", max11605), + MAX1363_ID_TABLE("max11606", max11606), + MAX1363_ID_TABLE("max11607", max11607), + MAX1363_ID_TABLE("max11608", max11608), + MAX1363_ID_TABLE("max11609", max11609), + MAX1363_ID_TABLE("max11610", max11610), + MAX1363_ID_TABLE("max11611", max11611), + MAX1363_ID_TABLE("max11612", max11612), + MAX1363_ID_TABLE("max11613", max11613), + MAX1363_ID_TABLE("max11614", max11614), + MAX1363_ID_TABLE("max11615", max11615), + MAX1363_ID_TABLE("max11616", max11616), + MAX1363_ID_TABLE("max11617", max11617), + MAX1363_ID_TABLE("max11644", max11644), + MAX1363_ID_TABLE("max11645", max11645), + MAX1363_ID_TABLE("max11646", max11646), + MAX1363_ID_TABLE("max11647", max11647), + { /* sentinel */ } }; MODULE_DEVICE_TABLE(i2c, max1363_id); diff --git a/drivers/iio/adc/mcp3564.c b/drivers/iio/adc/mcp3564.c new file mode 100644 index 0000000000..311b613b60 --- /dev/null +++ b/drivers/iio/adc/mcp3564.c @@ -0,0 +1,1513 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * IIO driver for MCP356X/MCP356XR and MCP346X/MCP346XR series ADC chip family + * + * Copyright (C) 2022-2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Marius Cristea <marius.cristea@microchip.com> + * + * Datasheet for MCP3561, MCP3562, MCP3564 can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf + * Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf + * Datasheet for MCP3461, MCP3462, MCP3464 can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf + * Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf + */ + +#include <linux/bitfield.h> +#include <linux/iopoll.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> +#include <linux/units.h> +#include <linux/util_macros.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define MCP3564_ADCDATA_REG 0x00 + +#define MCP3564_CONFIG0_REG 0x01 +#define MCP3564_CONFIG0_ADC_MODE_MASK GENMASK(1, 0) +/* Current Source/Sink Selection Bits for Sensor Bias */ +#define MCP3564_CONFIG0_CS_SEL_MASK GENMASK(3, 2) +/* Internal clock is selected and AMCLK is present on the analog master clock output pin */ +#define MCP3564_CONFIG0_USE_INT_CLK_OUTPUT_EN 0x03 +/* Internal clock is selected and no clock output is present on the CLK pin */ +#define MCP3564_CONFIG0_USE_INT_CLK 0x02 +/* External digital clock */ +#define MCP3564_CONFIG0_USE_EXT_CLK 0x01 +/* External digital clock (default) */ +#define MCP3564_CONFIG0_USE_EXT_CLK_DEFAULT 0x00 +#define MCP3564_CONFIG0_CLK_SEL_MASK GENMASK(5, 4) +#define MCP3456_CONFIG0_BIT6_DEFAULT BIT(6) +#define MCP3456_CONFIG0_VREF_MASK BIT(7) + +#define MCP3564_CONFIG1_REG 0x02 +#define MCP3564_CONFIG1_OVERSPL_RATIO_MASK GENMASK(5, 2) + +#define MCP3564_CONFIG2_REG 0x03 +#define MCP3564_CONFIG2_AZ_REF_MASK BIT(1) +#define MCP3564_CONFIG2_AZ_MUX_MASK BIT(2) + +#define MCP3564_CONFIG2_HARDWARE_GAIN_MASK GENMASK(5, 3) +#define MCP3564_DEFAULT_HARDWARE_GAIN 0x01 +#define MCP3564_CONFIG2_BOOST_CURRENT_MASK GENMASK(7, 6) + +#define MCP3564_CONFIG3_REG 0x04 +#define MCP3464_CONFIG3_EN_GAINCAL_MASK BIT(0) +#define MCP3464_CONFIG3_EN_OFFCAL_MASK BIT(1) +#define MCP3464_CONFIG3_EN_CRCCOM_MASK BIT(2) +#define MCP3464_CONFIG3_CRC_FORMAT_MASK BIT(3) +/* + * ADC Output Data Format 32-bit (25-bit right justified data + Channel ID): + * CHID[3:0] + SGN extension (4 bits) + 24-bit ADC data. + * It allows overrange with the SGN extension. + */ +#define MCP3464_CONFIG3_DATA_FMT_32B_WITH_CH_ID 3 +/* + * ADC Output Data Format 32-bit (25-bit right justified data): + * SGN extension (8-bit) + 24-bit ADC data. + * It allows overrange with the SGN extension. + */ +#define MCP3464_CONFIG3_DATA_FMT_32B_SGN_EXT 2 +/* + * ADC Output Data Format 32-bit (24-bit left justified data): + * 24-bit ADC data + 0x00 (8-bit). + * It does not allow overrange (ADC code locked to 0xFFFFFF or 0x800000). + */ +#define MCP3464_CONFIG3_DATA_FMT_32B_LEFT_JUSTIFIED 1 +/* + * ADC Output Data Format 24-bit (default ADC coding): + * 24-bit ADC data. + * It does not allow overrange (ADC code locked to 0xFFFFFF or 0x800000). + */ +#define MCP3464_CONFIG3_DATA_FMT_24B 0 +#define MCP3464_CONFIG3_DATA_FORMAT_MASK GENMASK(5, 4) + +/* Continuous Conversion mode or continuous conversion cycle in SCAN mode. */ +#define MCP3464_CONFIG3_CONV_MODE_CONTINUOUS 3 +/* + * One-shot conversion or one-shot cycle in SCAN mode. It sets ADC_MODE[1:0] to ‘10’ + * (standby) at the end of the conversion or at the end of the conversion cycle in SCAN mode. + */ +#define MCP3464_CONFIG3_CONV_MODE_ONE_SHOT_STANDBY 2 +/* + * One-shot conversion or one-shot cycle in SCAN mode. It sets ADC_MODE[1:0] to ‘0x’ (ADC + * Shutdown) at the end of the conversion or at the end of the conversion cycle in SCAN + * mode (default). + */ +#define MCP3464_CONFIG3_CONV_MODE_ONE_SHOT_SHUTDOWN 0 +#define MCP3464_CONFIG3_CONV_MODE_MASK GENMASK(7, 6) + +#define MCP3564_IRQ_REG 0x05 +#define MCP3464_EN_STP_MASK BIT(0) +#define MCP3464_EN_FASTCMD_MASK BIT(1) +#define MCP3464_IRQ_MODE_0_MASK BIT(2) +#define MCP3464_IRQ_MODE_1_MASK BIT(3) +#define MCP3564_POR_STATUS_MASK BIT(4) +#define MCP3564_CRCCFG_STATUS_MASK BIT(5) +#define MCP3564_DATA_READY_MASK BIT(6) + +#define MCP3564_MUX_REG 0x06 +#define MCP3564_MUX_VIN_P_MASK GENMASK(7, 4) +#define MCP3564_MUX_VIN_N_MASK GENMASK(3, 0) +#define MCP3564_MUX_SET(x, y) (FIELD_PREP(MCP3564_MUX_VIN_P_MASK, (x)) | \ + FIELD_PREP(MCP3564_MUX_VIN_N_MASK, (y))) + +#define MCP3564_SCAN_REG 0x07 +#define MCP3564_SCAN_CH_SEL_MASK GENMASK(15, 0) +#define MCP3564_SCAN_CH_SEL_SET(x) FIELD_PREP(MCP3564_SCAN_CH_SEL_MASK, (x)) +#define MCP3564_SCAN_DELAY_TIME_MASK GENMASK(23, 21) +#define MCP3564_SCAN_DELAY_TIME_SET(x) FIELD_PREP(MCP3564_SCAN_DELAY_TIME_MASK, (x)) +#define MCP3564_SCAN_DEFAULT_VALUE 0 + +#define MCP3564_TIMER_REG 0x08 +#define MCP3564_TIMER_DEFAULT_VALUE 0 + +#define MCP3564_OFFSETCAL_REG 0x09 +#define MCP3564_DEFAULT_OFFSETCAL 0 + +#define MCP3564_GAINCAL_REG 0x0A +#define MCP3564_DEFAULT_GAINCAL 0x00800000 + +#define MCP3564_RESERVED_B_REG 0x0B + +#define MCP3564_RESERVED_C_REG 0x0C +#define MCP3564_C_REG_DEFAULT 0x50 +#define MCP3564R_C_REG_DEFAULT 0x30 + +#define MCP3564_LOCK_REG 0x0D +#define MCP3564_LOCK_WRITE_ACCESS_PASSWORD 0xA5 +#define MCP3564_RESERVED_E_REG 0x0E +#define MCP3564_CRCCFG_REG 0x0F + +#define MCP3564_CMD_HW_ADDR_MASK GENMASK(7, 6) +#define MCP3564_CMD_ADDR_MASK GENMASK(5, 2) + +#define MCP3564_HW_ADDR_MASK GENMASK(1, 0) + +#define MCP3564_FASTCMD_START 0x0A +#define MCP3564_FASTCMD_RESET 0x0E + +#define MCP3461_HW_ID 0x0008 +#define MCP3462_HW_ID 0x0009 +#define MCP3464_HW_ID 0x000B + +#define MCP3561_HW_ID 0x000C +#define MCP3562_HW_ID 0x000D +#define MCP3564_HW_ID 0x000F +#define MCP3564_HW_ID_MASK GENMASK(3, 0) + +#define MCP3564R_INT_VREF_MV 2400 + +#define MCP3564_DATA_READY_TIMEOUT_MS 2000 + +#define MCP3564_MAX_PGA 8 +#define MCP3564_MAX_BURNOUT_IDX 4 +#define MCP3564_MAX_CHANNELS 66 + +enum mcp3564_ids { + mcp3461, + mcp3462, + mcp3464, + mcp3561, + mcp3562, + mcp3564, + mcp3461r, + mcp3462r, + mcp3464r, + mcp3561r, + mcp3562r, + mcp3564r, +}; + +enum mcp3564_delay_time { + MCP3564_NO_DELAY, + MCP3564_DELAY_8_DMCLK, + MCP3564_DELAY_16_DMCLK, + MCP3564_DELAY_32_DMCLK, + MCP3564_DELAY_64_DMCLK, + MCP3564_DELAY_128_DMCLK, + MCP3564_DELAY_256_DMCLK, + MCP3564_DELAY_512_DMCLK +}; + +enum mcp3564_adc_conversion_mode { + MCP3564_ADC_MODE_DEFAULT, + MCP3564_ADC_MODE_SHUTDOWN, + MCP3564_ADC_MODE_STANDBY, + MCP3564_ADC_MODE_CONVERSION +}; + +enum mcp3564_adc_bias_current { + MCP3564_BOOST_CURRENT_x0_50, + MCP3564_BOOST_CURRENT_x0_66, + MCP3564_BOOST_CURRENT_x1_00, + MCP3564_BOOST_CURRENT_x2_00 +}; + +enum mcp3564_burnout { + MCP3564_CONFIG0_CS_SEL_0_0_uA, + MCP3564_CONFIG0_CS_SEL_0_9_uA, + MCP3564_CONFIG0_CS_SEL_3_7_uA, + MCP3564_CONFIG0_CS_SEL_15_uA +}; + +enum mcp3564_channel_names { + MCP3564_CH0, + MCP3564_CH1, + MCP3564_CH2, + MCP3564_CH3, + MCP3564_CH4, + MCP3564_CH5, + MCP3564_CH6, + MCP3564_CH7, + MCP3564_AGND, + MCP3564_AVDD, + MCP3564_RESERVED, /* do not use */ + MCP3564_REFIN_POZ, + MCP3564_REFIN_NEG, + MCP3564_TEMP_DIODE_P, + MCP3564_TEMP_DIODE_M, + MCP3564_INTERNAL_VCM, +}; + +enum mcp3564_oversampling { + MCP3564_OVERSAMPLING_RATIO_32, + MCP3564_OVERSAMPLING_RATIO_64, + MCP3564_OVERSAMPLING_RATIO_128, + MCP3564_OVERSAMPLING_RATIO_256, + MCP3564_OVERSAMPLING_RATIO_512, + MCP3564_OVERSAMPLING_RATIO_1024, + MCP3564_OVERSAMPLING_RATIO_2048, + MCP3564_OVERSAMPLING_RATIO_4096, + MCP3564_OVERSAMPLING_RATIO_8192, + MCP3564_OVERSAMPLING_RATIO_16384, + MCP3564_OVERSAMPLING_RATIO_20480, + MCP3564_OVERSAMPLING_RATIO_24576, + MCP3564_OVERSAMPLING_RATIO_40960, + MCP3564_OVERSAMPLING_RATIO_49152, + MCP3564_OVERSAMPLING_RATIO_81920, + MCP3564_OVERSAMPLING_RATIO_98304 +}; + +static const unsigned int mcp3564_oversampling_avail[] = { + [MCP3564_OVERSAMPLING_RATIO_32] = 32, + [MCP3564_OVERSAMPLING_RATIO_64] = 64, + [MCP3564_OVERSAMPLING_RATIO_128] = 128, + [MCP3564_OVERSAMPLING_RATIO_256] = 256, + [MCP3564_OVERSAMPLING_RATIO_512] = 512, + [MCP3564_OVERSAMPLING_RATIO_1024] = 1024, + [MCP3564_OVERSAMPLING_RATIO_2048] = 2048, + [MCP3564_OVERSAMPLING_RATIO_4096] = 4096, + [MCP3564_OVERSAMPLING_RATIO_8192] = 8192, + [MCP3564_OVERSAMPLING_RATIO_16384] = 16384, + [MCP3564_OVERSAMPLING_RATIO_20480] = 20480, + [MCP3564_OVERSAMPLING_RATIO_24576] = 24576, + [MCP3564_OVERSAMPLING_RATIO_40960] = 40960, + [MCP3564_OVERSAMPLING_RATIO_49152] = 49152, + [MCP3564_OVERSAMPLING_RATIO_81920] = 81920, + [MCP3564_OVERSAMPLING_RATIO_98304] = 98304 +}; + +/* + * Current Source/Sink Selection Bits for Sensor Bias (source on VIN+/sink on VIN-) + */ +static const int mcp3564_burnout_avail[][2] = { + [MCP3564_CONFIG0_CS_SEL_0_0_uA] = { 0, 0 }, + [MCP3564_CONFIG0_CS_SEL_0_9_uA] = { 0, 900 }, + [MCP3564_CONFIG0_CS_SEL_3_7_uA] = { 0, 3700 }, + [MCP3564_CONFIG0_CS_SEL_15_uA] = { 0, 15000 } +}; + +/* + * BOOST[1:0]: ADC Bias Current Selection + */ +static const char * const mcp3564_boost_current_avail[] = { + [MCP3564_BOOST_CURRENT_x0_50] = "0.5", + [MCP3564_BOOST_CURRENT_x0_66] = "0.66", + [MCP3564_BOOST_CURRENT_x1_00] = "1", + [MCP3564_BOOST_CURRENT_x2_00] = "2", +}; + +/* + * Calibration bias values + */ +static const int mcp3564_calib_bias[] = { + -8388608, /* min: -2^23 */ + 1, /* step: 1 */ + 8388607 /* max: 2^23 - 1 */ +}; + +/* + * Calibration scale values + * The Gain Error Calibration register (GAINCAL) is an + * unsigned 24-bit register that holds the digital gain error + * calibration value, GAINCAL which could be calculated by + * GAINCAL (V/V) = (GAINCAL[23:0])/8388608 + * The gain error calibration value range in equivalent voltage is [0; 2-2^(-23)] + */ +static const unsigned int mcp3564_calib_scale[] = { + 0, /* min: 0 */ + 1, /* step: 1/8388608 */ + 16777215 /* max: 2 - 2^(-23) */ +}; + +/* Programmable hardware gain x1/3, x1, x2, x4, x8, x16, x32, x64 */ +static const int mcp3564_hwgain_frac[] = { + 3, 10, + 1, 1, + 2, 1, + 4, 1, + 8, 1, + 16, 1, + 32, 1, + 64, 1 +}; + +static const char *mcp3564_channel_labels[2] = { + "burnout_current", "temperature", +}; + +/** + * struct mcp3564_chip_info - chip specific data + * @name: device name + * @num_channels: number of channels + * @resolution: ADC resolution + * @have_vref: does the hardware have an internal voltage reference? + */ +struct mcp3564_chip_info { + const char *name; + unsigned int num_channels; + unsigned int resolution; + bool have_vref; +}; + +/** + * struct mcp3564_state - working data for a ADC device + * @chip_info: chip specific data + * @spi: SPI device structure + * @vref: the regulator device used as a voltage reference in case + * external voltage reference is used + * @vref_mv: voltage reference value in miliVolts + * @lock: synchronize access to driver's state members + * @dev_addr: hardware device address + * @oversampling: the index inside oversampling list of the ADC + * @hwgain: the index inside hardware gain list of the ADC + * @scale_tbls: table with precalculated scale + * @calib_bias: calibration bias value + * @calib_scale: calibration scale value + * @current_boost_mode: the index inside current boost list of the ADC + * @burnout_mode: the index inside current bias list of the ADC + * @auto_zeroing_mux: set if ADC auto-zeroing algorithm is enabled + * @auto_zeroing_ref: set if ADC auto-Zeroing Reference Buffer Setting is enabled + * @have_vref: does the ADC have an internal voltage reference? + * @labels: table with channels labels + */ +struct mcp3564_state { + const struct mcp3564_chip_info *chip_info; + struct spi_device *spi; + struct regulator *vref; + unsigned short vref_mv; + struct mutex lock; /* Synchronize access to driver's state members */ + u8 dev_addr; + enum mcp3564_oversampling oversampling; + unsigned int hwgain; + unsigned int scale_tbls[MCP3564_MAX_PGA][2]; + int calib_bias; + int calib_scale; + unsigned int current_boost_mode; + enum mcp3564_burnout burnout_mode; + bool auto_zeroing_mux; + bool auto_zeroing_ref; + bool have_vref; + const char *labels[MCP3564_MAX_CHANNELS]; +}; + +static inline u8 mcp3564_cmd_write(u8 chip_addr, u8 reg) +{ + return FIELD_PREP(MCP3564_CMD_HW_ADDR_MASK, chip_addr) | + FIELD_PREP(MCP3564_CMD_ADDR_MASK, reg) | + BIT(1); +} + +static inline u8 mcp3564_cmd_read(u8 chip_addr, u8 reg) +{ + return FIELD_PREP(MCP3564_CMD_HW_ADDR_MASK, chip_addr) | + FIELD_PREP(MCP3564_CMD_ADDR_MASK, reg) | + BIT(0); +} + +static int mcp3564_read_8bits(struct mcp3564_state *adc, u8 reg, u8 *val) +{ + int ret; + u8 tx_buf; + u8 rx_buf; + + tx_buf = mcp3564_cmd_read(adc->dev_addr, reg); + + ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf), + &rx_buf, sizeof(rx_buf)); + *val = rx_buf; + + return ret; +} + +static int mcp3564_read_16bits(struct mcp3564_state *adc, u8 reg, u16 *val) +{ + int ret; + u8 tx_buf; + __be16 rx_buf; + + tx_buf = mcp3564_cmd_read(adc->dev_addr, reg); + + ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf), + &rx_buf, sizeof(rx_buf)); + *val = be16_to_cpu(rx_buf); + + return ret; +} + +static int mcp3564_read_32bits(struct mcp3564_state *adc, u8 reg, u32 *val) +{ + int ret; + u8 tx_buf; + __be32 rx_buf; + + tx_buf = mcp3564_cmd_read(adc->dev_addr, reg); + + ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf), + &rx_buf, sizeof(rx_buf)); + *val = be32_to_cpu(rx_buf); + + return ret; +} + +static int mcp3564_write_8bits(struct mcp3564_state *adc, u8 reg, u8 val) +{ + u8 tx_buf[2]; + + tx_buf[0] = mcp3564_cmd_write(adc->dev_addr, reg); + tx_buf[1] = val; + + return spi_write_then_read(adc->spi, tx_buf, sizeof(tx_buf), NULL, 0); +} + +static int mcp3564_write_24bits(struct mcp3564_state *adc, u8 reg, u32 val) +{ + __be32 val_be; + + val |= (mcp3564_cmd_write(adc->dev_addr, reg) << 24); + val_be = cpu_to_be32(val); + + return spi_write_then_read(adc->spi, &val_be, sizeof(val_be), NULL, 0); +} + +static int mcp3564_fast_cmd(struct mcp3564_state *adc, u8 fast_cmd) +{ + u8 val; + + val = FIELD_PREP(MCP3564_CMD_HW_ADDR_MASK, adc->dev_addr) | + FIELD_PREP(MCP3564_CMD_ADDR_MASK, fast_cmd); + + return spi_write_then_read(adc->spi, &val, 1, NULL, 0); +} + +static int mcp3564_update_8bits(struct mcp3564_state *adc, u8 reg, u32 mask, u8 val) +{ + u8 tmp; + int ret; + + val &= mask; + + ret = mcp3564_read_8bits(adc, reg, &tmp); + if (ret < 0) + return ret; + + tmp &= ~mask; + tmp |= val; + + return mcp3564_write_8bits(adc, reg, tmp); +} + +static int mcp3564_set_current_boost_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + int ret; + + dev_dbg(&indio_dev->dev, "%s: %d\n", __func__, mode); + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2_REG, MCP3564_CONFIG2_BOOST_CURRENT_MASK, + FIELD_PREP(MCP3564_CONFIG2_BOOST_CURRENT_MASK, mode)); + + if (ret) + dev_err(&indio_dev->dev, "Failed to configure CONFIG2 register\n"); + else + adc->current_boost_mode = mode; + + mutex_unlock(&adc->lock); + + return ret; +} + +static int mcp3564_get_current_boost_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + + return adc->current_boost_mode; +} + +static const struct iio_enum mcp3564_current_boost_mode_enum = { + .items = mcp3564_boost_current_avail, + .num_items = ARRAY_SIZE(mcp3564_boost_current_avail), + .set = mcp3564_set_current_boost_mode, + .get = mcp3564_get_current_boost_mode, +}; + +static const struct iio_chan_spec_ext_info mcp3564_ext_info[] = { + IIO_ENUM("boost_current_gain", IIO_SHARED_BY_ALL, &mcp3564_current_boost_mode_enum), + { + .name = "boost_current_gain_available", + .shared = IIO_SHARED_BY_ALL, + .read = iio_enum_available_read, + .private = (uintptr_t)&mcp3564_current_boost_mode_enum, + }, + { } +}; + +static ssize_t mcp3564_auto_zeroing_mux_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp3564_state *adc = iio_priv(indio_dev); + + return sysfs_emit(buf, "%d\n", adc->auto_zeroing_mux); +} + +static ssize_t mcp3564_auto_zeroing_mux_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp3564_state *adc = iio_priv(indio_dev); + bool auto_zero; + int ret; + + ret = kstrtobool(buf, &auto_zero); + if (ret) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2_REG, MCP3564_CONFIG2_AZ_MUX_MASK, + FIELD_PREP(MCP3564_CONFIG2_AZ_MUX_MASK, auto_zero)); + + if (ret) + dev_err(&indio_dev->dev, "Failed to update CONFIG2 register\n"); + else + adc->auto_zeroing_mux = auto_zero; + + mutex_unlock(&adc->lock); + + return ret ? ret : len; +} + +static ssize_t mcp3564_auto_zeroing_ref_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp3564_state *adc = iio_priv(indio_dev); + + return sysfs_emit(buf, "%d\n", adc->auto_zeroing_ref); +} + +static ssize_t mcp3564_auto_zeroing_ref_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp3564_state *adc = iio_priv(indio_dev); + bool auto_zero; + int ret; + + ret = kstrtobool(buf, &auto_zero); + if (ret) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2_REG, MCP3564_CONFIG2_AZ_REF_MASK, + FIELD_PREP(MCP3564_CONFIG2_AZ_REF_MASK, auto_zero)); + + if (ret) + dev_err(&indio_dev->dev, "Failed to update CONFIG2 register\n"); + else + adc->auto_zeroing_ref = auto_zero; + + mutex_unlock(&adc->lock); + + return ret ? ret : len; +} + +static const struct iio_chan_spec mcp3564_channel_template = { + .type = IIO_VOLTAGE, + .indexed = 1, + .differential = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .ext_info = mcp3564_ext_info, +}; + +static const struct iio_chan_spec mcp3564_temp_channel_template = { + .type = IIO_TEMP, + .channel = 0, + .address = ((MCP3564_TEMP_DIODE_P << 4) | MCP3564_TEMP_DIODE_M), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), +}; + +static const struct iio_chan_spec mcp3564_burnout_channel_template = { + .type = IIO_CURRENT, + .output = true, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), +}; + +/* + * Number of channels could be calculated: + * num_channels = single_ended_input + differential_input + temperature + burnout + * Eg. for MCP3561 (only 2 channels available: CH0 and CH1) + * single_ended_input = (CH0 - GND), (CH1 - GND) = 2 + * differential_input = (CH0 - CH1), (CH0 - CH0) = 2 + * num_channels = 2 + 2 + 2 + * Generic formula is: + * num_channels = P^R(Number_of_single_ended_channels, 2) + 2 (temperature + burnout channels) + * P^R(Number_of_single_ended_channels, 2) is Permutations with Replacement of + * Number_of_single_ended_channels taken by 2 + */ +static const struct mcp3564_chip_info mcp3564_chip_infos_tbl[] = { + [mcp3461] = { + .name = "mcp3461", + .num_channels = 6, + .resolution = 16, + .have_vref = false, + }, + [mcp3462] = { + .name = "mcp3462", + .num_channels = 18, + .resolution = 16, + .have_vref = false, + }, + [mcp3464] = { + .name = "mcp3464", + .num_channels = 66, + .resolution = 16, + .have_vref = false, + }, + [mcp3561] = { + .name = "mcp3561", + .num_channels = 6, + .resolution = 24, + .have_vref = false, + }, + [mcp3562] = { + .name = "mcp3562", + .num_channels = 18, + .resolution = 24, + .have_vref = false, + }, + [mcp3564] = { + .name = "mcp3564", + .num_channels = 66, + .resolution = 24, + .have_vref = false, + }, + [mcp3461r] = { + .name = "mcp3461r", + .num_channels = 6, + .resolution = 16, + .have_vref = false, + }, + [mcp3462r] = { + .name = "mcp3462r", + .num_channels = 18, + .resolution = 16, + .have_vref = true, + }, + [mcp3464r] = { + .name = "mcp3464r", + .num_channels = 66, + .resolution = 16, + .have_vref = true, + }, + [mcp3561r] = { + .name = "mcp3561r", + .num_channels = 6, + .resolution = 24, + .have_vref = true, + }, + [mcp3562r] = { + .name = "mcp3562r", + .num_channels = 18, + .resolution = 24, + .have_vref = true, + }, + [mcp3564r] = { + .name = "mcp3564r", + .num_channels = 66, + .resolution = 24, + .have_vref = true, + }, +}; + +static int mcp3564_read_single_value(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, + int *val) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + int ret; + u8 tmp; + int ret_read = 0; + + ret = mcp3564_write_8bits(adc, MCP3564_MUX_REG, channel->address); + if (ret) + return ret; + + /* Start ADC Conversion using fast command (overwrites ADC_MODE[1:0] = 11) */ + ret = mcp3564_fast_cmd(adc, MCP3564_FASTCMD_START); + if (ret) + return ret; + + /* + * Check if the conversion is ready. If not, wait a little bit, and + * in case of timeout exit with an error. + */ + ret = read_poll_timeout(mcp3564_read_8bits, ret_read, + ret_read || !(tmp & MCP3564_DATA_READY_MASK), + 20000, MCP3564_DATA_READY_TIMEOUT_MS * 1000, true, + adc, MCP3564_IRQ_REG, &tmp); + + /* failed to read status register */ + if (ret_read) + return ret_read; + + if (ret) + return ret; + + if (tmp & MCP3564_DATA_READY_MASK) + /* failing to finish conversion */ + return -EBUSY; + + return mcp3564_read_32bits(adc, MCP3564_ADCDATA_REG, val); +} + +static int mcp3564_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, + const int **vals, int *type, + int *length, long mask) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (!channel->output) + return -EINVAL; + + *vals = mcp3564_burnout_avail[0]; + *length = ARRAY_SIZE(mcp3564_burnout_avail) * 2; + *type = IIO_VAL_INT_PLUS_MICRO; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = mcp3564_oversampling_avail; + *length = ARRAY_SIZE(mcp3564_oversampling_avail); + *type = IIO_VAL_INT; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_SCALE: + *vals = (int *)adc->scale_tbls; + *length = ARRAY_SIZE(adc->scale_tbls) * 2; + *type = IIO_VAL_INT_PLUS_NANO; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_CALIBBIAS: + *vals = mcp3564_calib_bias; + *type = IIO_VAL_INT; + return IIO_AVAIL_RANGE; + case IIO_CHAN_INFO_CALIBSCALE: + *vals = mcp3564_calib_scale; + *type = IIO_VAL_INT; + return IIO_AVAIL_RANGE; + default: + return -EINVAL; + } +} + +static int mcp3564_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, + int *val, int *val2, long mask) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (channel->output) { + mutex_lock(&adc->lock); + *val = mcp3564_burnout_avail[adc->burnout_mode][0]; + *val2 = mcp3564_burnout_avail[adc->burnout_mode][1]; + mutex_unlock(&adc->lock); + return IIO_VAL_INT_PLUS_MICRO; + } + + ret = mcp3564_read_single_value(indio_dev, channel, val); + if (ret) + return -EINVAL; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + mutex_lock(&adc->lock); + *val = adc->scale_tbls[adc->hwgain][0]; + *val2 = adc->scale_tbls[adc->hwgain][1]; + mutex_unlock(&adc->lock); + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = mcp3564_oversampling_avail[adc->oversampling]; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBBIAS: + *val = adc->calib_bias; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBSCALE: + *val = adc->calib_scale; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int mcp3564_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long info) +{ + switch (info) { + case IIO_CHAN_INFO_RAW: + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_CALIBBIAS: + case IIO_CHAN_INFO_CALIBSCALE: + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } +} + +static int mcp3564_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int val, + int val2, long mask) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + int tmp; + unsigned int hwgain; + enum mcp3564_burnout burnout; + int ret = 0; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (!channel->output) + return -EINVAL; + + for (burnout = 0; burnout < MCP3564_MAX_BURNOUT_IDX; burnout++) + if (val == mcp3564_burnout_avail[burnout][0] && + val2 == mcp3564_burnout_avail[burnout][1]) + break; + + if (burnout == MCP3564_MAX_BURNOUT_IDX) + return -EINVAL; + + if (burnout == adc->burnout_mode) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG0_REG, + MCP3564_CONFIG0_CS_SEL_MASK, + FIELD_PREP(MCP3564_CONFIG0_CS_SEL_MASK, burnout)); + + if (ret) + dev_err(&indio_dev->dev, "Failed to configure burnout current\n"); + else + adc->burnout_mode = burnout; + mutex_unlock(&adc->lock); + return ret; + case IIO_CHAN_INFO_CALIBBIAS: + if (val < mcp3564_calib_bias[0] || val > mcp3564_calib_bias[2]) + return -EINVAL; + + mutex_lock(&adc->lock); + ret = mcp3564_write_24bits(adc, MCP3564_OFFSETCAL_REG, val); + if (!ret) + adc->calib_bias = val; + mutex_unlock(&adc->lock); + return ret; + case IIO_CHAN_INFO_CALIBSCALE: + if (val < mcp3564_calib_scale[0] || val > mcp3564_calib_scale[2]) + return -EINVAL; + + if (adc->calib_scale == val) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_write_24bits(adc, MCP3564_GAINCAL_REG, val); + if (!ret) + adc->calib_scale = val; + mutex_unlock(&adc->lock); + return ret; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + if (val < 0) + return -EINVAL; + + tmp = find_closest(val, mcp3564_oversampling_avail, + ARRAY_SIZE(mcp3564_oversampling_avail)); + + if (adc->oversampling == tmp) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG1_REG, + MCP3564_CONFIG1_OVERSPL_RATIO_MASK, + FIELD_PREP(MCP3564_CONFIG1_OVERSPL_RATIO_MASK, + adc->oversampling)); + if (!ret) + adc->oversampling = tmp; + mutex_unlock(&adc->lock); + return ret; + case IIO_CHAN_INFO_SCALE: + for (hwgain = 0; hwgain < MCP3564_MAX_PGA; hwgain++) + if (val == adc->scale_tbls[hwgain][0] && + val2 == adc->scale_tbls[hwgain][1]) + break; + + if (hwgain == MCP3564_MAX_PGA) + return -EINVAL; + + if (hwgain == adc->hwgain) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2_REG, + MCP3564_CONFIG2_HARDWARE_GAIN_MASK, + FIELD_PREP(MCP3564_CONFIG2_HARDWARE_GAIN_MASK, hwgain)); + if (!ret) + adc->hwgain = hwgain; + + mutex_unlock(&adc->lock); + return ret; + default: + return -EINVAL; + } +} + +static int mcp3564_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, char *label) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + + return sprintf(label, "%s\n", adc->labels[chan->scan_index]); +} + +static int mcp3564_parse_fw_children(struct iio_dev *indio_dev) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + struct device *dev = &adc->spi->dev; + struct iio_chan_spec *channels; + struct fwnode_handle *child; + struct iio_chan_spec chanspec = mcp3564_channel_template; + struct iio_chan_spec temp_chanspec = mcp3564_temp_channel_template; + struct iio_chan_spec burnout_chanspec = mcp3564_burnout_channel_template; + int chan_idx = 0; + unsigned int num_ch; + u32 inputs[2]; + const char *node_name; + const char *label; + int ret; + + num_ch = device_get_child_node_count(dev); + if (num_ch == 0) + return dev_err_probe(&indio_dev->dev, -ENODEV, + "FW has no channels defined\n"); + + /* Reserve space for burnout and temperature channel */ + num_ch += 2; + + if (num_ch > adc->chip_info->num_channels) + return dev_err_probe(dev, -EINVAL, "Too many channels %d > %d\n", + num_ch, adc->chip_info->num_channels); + + channels = devm_kcalloc(dev, num_ch, sizeof(*channels), GFP_KERNEL); + if (!channels) + return dev_err_probe(dev, -ENOMEM, "Can't allocate memory\n"); + + device_for_each_child_node(dev, child) { + node_name = fwnode_get_name(child); + + if (fwnode_property_present(child, "diff-channels")) { + ret = fwnode_property_read_u32_array(child, + "diff-channels", + inputs, + ARRAY_SIZE(inputs)); + chanspec.differential = 1; + } else { + ret = fwnode_property_read_u32(child, "reg", &inputs[0]); + + chanspec.differential = 0; + inputs[1] = MCP3564_AGND; + } + if (ret) { + fwnode_handle_put(child); + return ret; + } + + if (inputs[0] > MCP3564_INTERNAL_VCM || + inputs[1] > MCP3564_INTERNAL_VCM) { + fwnode_handle_put(child); + return dev_err_probe(&indio_dev->dev, -EINVAL, + "Channel index > %d, for %s\n", + MCP3564_INTERNAL_VCM + 1, + node_name); + } + + chanspec.address = (inputs[0] << 4) | inputs[1]; + chanspec.channel = inputs[0]; + chanspec.channel2 = inputs[1]; + chanspec.scan_index = chan_idx; + + if (fwnode_property_present(child, "label")) { + fwnode_property_read_string(child, "label", &label); + adc->labels[chan_idx] = label; + } + + channels[chan_idx] = chanspec; + chan_idx++; + } + + /* Add burnout current channel */ + burnout_chanspec.scan_index = chan_idx; + channels[chan_idx] = burnout_chanspec; + adc->labels[chan_idx] = mcp3564_channel_labels[0]; + chanspec.scan_index = chan_idx; + chan_idx++; + + /* Add temperature channel */ + temp_chanspec.scan_index = chan_idx; + channels[chan_idx] = temp_chanspec; + adc->labels[chan_idx] = mcp3564_channel_labels[1]; + chan_idx++; + + indio_dev->num_channels = chan_idx; + indio_dev->channels = channels; + + return 0; +} + +static void mcp3564_disable_reg(void *reg) +{ + regulator_disable(reg); +} + +static void mcp3564_fill_scale_tbls(struct mcp3564_state *adc) +{ + unsigned int pow = adc->chip_info->resolution - 1; + int ref; + unsigned int i; + int tmp0; + u64 tmp1; + + for (i = 0; i < MCP3564_MAX_PGA; i++) { + ref = adc->vref_mv; + tmp1 = ((u64)ref * NANO) >> pow; + div_u64_rem(tmp1, NANO, &tmp0); + + tmp1 = tmp1 * mcp3564_hwgain_frac[(2 * i) + 1]; + tmp0 = (int)div_u64(tmp1, mcp3564_hwgain_frac[2 * i]); + + adc->scale_tbls[i][1] = tmp0; + } +} + +static int mcp3564_config(struct iio_dev *indio_dev) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + struct device *dev = &adc->spi->dev; + const struct spi_device_id *dev_id; + u8 tmp_reg; + u16 tmp_u16; + enum mcp3564_ids ids; + int ret = 0; + unsigned int tmp = 0x01; + bool err = false; + + /* + * The address is set on a per-device basis by fuses in the factory, + * configured on request. If not requested, the fuses are set for 0x1. + * The device address is part of the device markings to avoid + * potential confusion. This address is coded on two bits, so four possible + * addresses are available when multiple devices are present on the same + * SPI bus with only one Chip Select line for all devices. + */ + device_property_read_u32(dev, "microchip,hw-device-address", &tmp); + + if (tmp > 3) { + dev_err_probe(dev, tmp, + "invalid device address. Must be in range 0-3.\n"); + return -EINVAL; + } + + adc->dev_addr = FIELD_GET(MCP3564_HW_ADDR_MASK, tmp); + + dev_dbg(dev, "use HW device address %i\n", adc->dev_addr); + + ret = mcp3564_read_8bits(adc, MCP3564_RESERVED_C_REG, &tmp_reg); + if (ret < 0) + return ret; + + switch (tmp_reg) { + case MCP3564_C_REG_DEFAULT: + adc->have_vref = false; + break; + case MCP3564R_C_REG_DEFAULT: + adc->have_vref = true; + break; + default: + dev_info(dev, "Unknown chip found: %d\n", tmp_reg); + err = true; + } + + if (!err) { + ret = mcp3564_read_16bits(adc, MCP3564_RESERVED_E_REG, &tmp_u16); + if (ret < 0) + return ret; + + switch (tmp_u16 & MCP3564_HW_ID_MASK) { + case MCP3461_HW_ID: + if (adc->have_vref) + ids = mcp3461r; + else + ids = mcp3461; + break; + case MCP3462_HW_ID: + if (adc->have_vref) + ids = mcp3462r; + else + ids = mcp3462; + break; + case MCP3464_HW_ID: + if (adc->have_vref) + ids = mcp3464r; + else + ids = mcp3464; + break; + case MCP3561_HW_ID: + if (adc->have_vref) + ids = mcp3561r; + else + ids = mcp3561; + break; + case MCP3562_HW_ID: + if (adc->have_vref) + ids = mcp3562r; + else + ids = mcp3562; + break; + case MCP3564_HW_ID: + if (adc->have_vref) + ids = mcp3564r; + else + ids = mcp3564; + break; + default: + dev_info(dev, "Unknown chip found: %d\n", tmp_u16); + err = true; + } + } + + if (err) { + /* + * If failed to identify the hardware based on internal registers, + * try using fallback compatible in device tree to deal with some newer part number. + */ + adc->chip_info = spi_get_device_match_data(adc->spi); + if (!adc->chip_info) { + dev_id = spi_get_device_id(adc->spi); + adc->chip_info = (const struct mcp3564_chip_info *)dev_id->driver_data; + } + + adc->have_vref = adc->chip_info->have_vref; + } else { + adc->chip_info = &mcp3564_chip_infos_tbl[ids]; + } + + dev_dbg(dev, "Found %s chip\n", adc->chip_info->name); + + adc->vref = devm_regulator_get_optional(dev, "vref"); + if (IS_ERR(adc->vref)) { + if (PTR_ERR(adc->vref) != -ENODEV) + return dev_err_probe(dev, PTR_ERR(adc->vref), + "failed to get regulator\n"); + + /* Check if chip has internal vref */ + if (!adc->have_vref) + return dev_err_probe(dev, PTR_ERR(adc->vref), + "Unknown Vref\n"); + adc->vref = NULL; + dev_dbg(dev, "%s: Using internal Vref\n", __func__); + } else { + ret = regulator_enable(adc->vref); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, mcp3564_disable_reg, + adc->vref); + if (ret) + return ret; + + dev_dbg(dev, "%s: Using External Vref\n", __func__); + + ret = regulator_get_voltage(adc->vref); + if (ret < 0) + return dev_err_probe(dev, ret, + "Failed to read vref regulator\n"); + + adc->vref_mv = ret / MILLI; + } + + ret = mcp3564_parse_fw_children(indio_dev); + if (ret) + return ret; + + /* + * Command sequence that ensures a recovery with the desired settings + * in any cases of loss-of-power scenario (Full Chip Reset): + * - Write LOCK register to 0xA5 + * - Write IRQ register to 0x03 + * - Send "Device Full Reset" fast command + * - Wait 1ms for "Full Reset" to complete + */ + ret = mcp3564_write_8bits(adc, MCP3564_LOCK_REG, MCP3564_LOCK_WRITE_ACCESS_PASSWORD); + if (ret) + return ret; + + ret = mcp3564_write_8bits(adc, MCP3564_IRQ_REG, 0x03); + if (ret) + return ret; + + ret = mcp3564_fast_cmd(adc, MCP3564_FASTCMD_RESET); + if (ret) + return ret; + + /* + * After Full reset wait some time to be able to fully reset the part and place + * it back in a default configuration. + * From datasheet: POR (Power On Reset Time) is ~1us + * 1ms should be enough. + */ + mdelay(1); + + /* set a gain of 1x for GAINCAL */ + ret = mcp3564_write_24bits(adc, MCP3564_GAINCAL_REG, MCP3564_DEFAULT_GAINCAL); + if (ret) + return ret; + + adc->calib_scale = MCP3564_DEFAULT_GAINCAL; + + ret = mcp3564_write_24bits(adc, MCP3564_OFFSETCAL_REG, MCP3564_DEFAULT_OFFSETCAL); + if (ret) + return ret; + + ret = mcp3564_write_24bits(adc, MCP3564_TIMER_REG, MCP3564_TIMER_DEFAULT_VALUE); + if (ret) + return ret; + + ret = mcp3564_write_24bits(adc, MCP3564_SCAN_REG, + MCP3564_SCAN_DELAY_TIME_SET(MCP3564_NO_DELAY) | + MCP3564_SCAN_CH_SEL_SET(MCP3564_SCAN_DEFAULT_VALUE)); + if (ret) + return ret; + + ret = mcp3564_write_8bits(adc, MCP3564_MUX_REG, MCP3564_MUX_SET(MCP3564_CH0, MCP3564_CH1)); + if (ret) + return ret; + + ret = mcp3564_write_8bits(adc, MCP3564_IRQ_REG, + FIELD_PREP(MCP3464_EN_FASTCMD_MASK, 1) | + FIELD_PREP(MCP3464_EN_STP_MASK, 1)); + if (ret) + return ret; + + tmp_reg = FIELD_PREP(MCP3464_CONFIG3_CONV_MODE_MASK, + MCP3464_CONFIG3_CONV_MODE_ONE_SHOT_STANDBY); + tmp_reg |= FIELD_PREP(MCP3464_CONFIG3_DATA_FORMAT_MASK, + MCP3464_CONFIG3_DATA_FMT_32B_SGN_EXT); + tmp_reg |= MCP3464_CONFIG3_EN_OFFCAL_MASK; + tmp_reg |= MCP3464_CONFIG3_EN_GAINCAL_MASK; + + ret = mcp3564_write_8bits(adc, MCP3564_CONFIG3_REG, tmp_reg); + if (ret) + return ret; + + tmp_reg = FIELD_PREP(MCP3564_CONFIG2_BOOST_CURRENT_MASK, MCP3564_BOOST_CURRENT_x1_00); + tmp_reg |= FIELD_PREP(MCP3564_CONFIG2_HARDWARE_GAIN_MASK, 0x01); + tmp_reg |= FIELD_PREP(MCP3564_CONFIG2_AZ_MUX_MASK, 1); + + ret = mcp3564_write_8bits(adc, MCP3564_CONFIG2_REG, tmp_reg); + if (ret) + return ret; + + adc->hwgain = 0x01; + adc->auto_zeroing_mux = true; + adc->auto_zeroing_ref = false; + adc->current_boost_mode = MCP3564_BOOST_CURRENT_x1_00; + + tmp_reg = FIELD_PREP(MCP3564_CONFIG1_OVERSPL_RATIO_MASK, MCP3564_OVERSAMPLING_RATIO_98304); + + ret = mcp3564_write_8bits(adc, MCP3564_CONFIG1_REG, tmp_reg); + if (ret) + return ret; + + adc->oversampling = MCP3564_OVERSAMPLING_RATIO_98304; + + tmp_reg = FIELD_PREP(MCP3564_CONFIG0_ADC_MODE_MASK, MCP3564_ADC_MODE_STANDBY); + tmp_reg |= FIELD_PREP(MCP3564_CONFIG0_CS_SEL_MASK, MCP3564_CONFIG0_CS_SEL_0_0_uA); + tmp_reg |= FIELD_PREP(MCP3564_CONFIG0_CLK_SEL_MASK, MCP3564_CONFIG0_USE_INT_CLK); + tmp_reg |= MCP3456_CONFIG0_BIT6_DEFAULT; + + if (!adc->vref) { + tmp_reg |= FIELD_PREP(MCP3456_CONFIG0_VREF_MASK, 1); + adc->vref_mv = MCP3564R_INT_VREF_MV; + } + + ret = mcp3564_write_8bits(adc, MCP3564_CONFIG0_REG, tmp_reg); + + adc->burnout_mode = MCP3564_CONFIG0_CS_SEL_0_0_uA; + + return ret; +} + +static IIO_DEVICE_ATTR(auto_zeroing_ref_enable, 0644, + mcp3564_auto_zeroing_ref_show, + mcp3564_auto_zeroing_ref_store, 0); + +static IIO_DEVICE_ATTR(auto_zeroing_mux_enable, 0644, + mcp3564_auto_zeroing_mux_show, + mcp3564_auto_zeroing_mux_store, 0); + +static struct attribute *mcp3564_attributes[] = { + &iio_dev_attr_auto_zeroing_mux_enable.dev_attr.attr, + NULL +}; + +static struct attribute *mcp3564r_attributes[] = { + &iio_dev_attr_auto_zeroing_mux_enable.dev_attr.attr, + &iio_dev_attr_auto_zeroing_ref_enable.dev_attr.attr, + NULL +}; + +static struct attribute_group mcp3564_attribute_group = { + .attrs = mcp3564_attributes, +}; + +static struct attribute_group mcp3564r_attribute_group = { + .attrs = mcp3564r_attributes, +}; + +static const struct iio_info mcp3564_info = { + .read_raw = mcp3564_read_raw, + .read_avail = mcp3564_read_avail, + .write_raw = mcp3564_write_raw, + .write_raw_get_fmt = mcp3564_write_raw_get_fmt, + .read_label = mcp3564_read_label, + .attrs = &mcp3564_attribute_group, +}; + +static const struct iio_info mcp3564r_info = { + .read_raw = mcp3564_read_raw, + .read_avail = mcp3564_read_avail, + .write_raw = mcp3564_write_raw, + .write_raw_get_fmt = mcp3564_write_raw_get_fmt, + .read_label = mcp3564_read_label, + .attrs = &mcp3564r_attribute_group, +}; + +static int mcp3564_probe(struct spi_device *spi) +{ + int ret; + struct iio_dev *indio_dev; + struct mcp3564_state *adc; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + + adc = iio_priv(indio_dev); + adc->spi = spi; + + dev_dbg(&spi->dev, "%s: probe(spi = 0x%p)\n", __func__, spi); + + /* + * Do any chip specific initialization, e.g: + * read/write some registers + * enable/disable certain channels + * change the sampling rate to the requested value + */ + ret = mcp3564_config(indio_dev); + if (ret) + return dev_err_probe(&spi->dev, ret, + "Can't configure MCP356X device\n"); + + dev_dbg(&spi->dev, "%s: Vref (mV): %d\n", __func__, adc->vref_mv); + + mcp3564_fill_scale_tbls(adc); + + indio_dev->name = adc->chip_info->name; + indio_dev->modes = INDIO_DIRECT_MODE; + + if (!adc->vref) + indio_dev->info = &mcp3564r_info; + else + indio_dev->info = &mcp3564_info; + + mutex_init(&adc->lock); + + ret = devm_iio_device_register(&spi->dev, indio_dev); + if (ret) + return dev_err_probe(&spi->dev, ret, + "Can't register IIO device\n"); + + return 0; +} + +static const struct of_device_id mcp3564_dt_ids[] = { + { .compatible = "microchip,mcp3461", .data = &mcp3564_chip_infos_tbl[mcp3461] }, + { .compatible = "microchip,mcp3462", .data = &mcp3564_chip_infos_tbl[mcp3462] }, + { .compatible = "microchip,mcp3464", .data = &mcp3564_chip_infos_tbl[mcp3464] }, + { .compatible = "microchip,mcp3561", .data = &mcp3564_chip_infos_tbl[mcp3561] }, + { .compatible = "microchip,mcp3562", .data = &mcp3564_chip_infos_tbl[mcp3562] }, + { .compatible = "microchip,mcp3564", .data = &mcp3564_chip_infos_tbl[mcp3564] }, + { .compatible = "microchip,mcp3461r", .data = &mcp3564_chip_infos_tbl[mcp3461r] }, + { .compatible = "microchip,mcp3462r", .data = &mcp3564_chip_infos_tbl[mcp3462r] }, + { .compatible = "microchip,mcp3464r", .data = &mcp3564_chip_infos_tbl[mcp3464r] }, + { .compatible = "microchip,mcp3561r", .data = &mcp3564_chip_infos_tbl[mcp3561r] }, + { .compatible = "microchip,mcp3562r", .data = &mcp3564_chip_infos_tbl[mcp3562r] }, + { .compatible = "microchip,mcp3564r", .data = &mcp3564_chip_infos_tbl[mcp3564r] }, + { } +}; +MODULE_DEVICE_TABLE(of, mcp3564_dt_ids); + +static const struct spi_device_id mcp3564_id[] = { + { "mcp3461", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3461] }, + { "mcp3462", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3462] }, + { "mcp3464", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3464] }, + { "mcp3561", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3561] }, + { "mcp3562", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3562] }, + { "mcp3564", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3564] }, + { "mcp3461r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3461r] }, + { "mcp3462r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3462r] }, + { "mcp3464r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3464r] }, + { "mcp3561r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3561r] }, + { "mcp3562r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3562r] }, + { "mcp3564r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3564r] }, + { } +}; +MODULE_DEVICE_TABLE(spi, mcp3564_id); + +static struct spi_driver mcp3564_driver = { + .driver = { + .name = "mcp3564", + .of_match_table = mcp3564_dt_ids, + }, + .probe = mcp3564_probe, + .id_table = mcp3564_id, +}; + +module_spi_driver(mcp3564_driver); + +MODULE_AUTHOR("Marius Cristea <marius.cristea@microchip.com>"); +MODULE_DESCRIPTION("Microchip MCP346x/MCP346xR and MCP356x/MCP356xR ADCs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c index 974c5bd923..d864558bc0 100644 --- a/drivers/iio/adc/mcp3911.c +++ b/drivers/iio/adc/mcp3911.c @@ -29,11 +29,11 @@ #define MCP3911_REG_MOD 0x06 #define MCP3911_REG_PHASE 0x07 #define MCP3911_REG_GAIN 0x09 -#define MCP3911_GAIN_MASK(ch) (GENMASK(2, 0) << 3 * ch) -#define MCP3911_GAIN_VAL(ch, val) ((val << 3 * ch) & MCP3911_GAIN_MASK(ch)) +#define MCP3911_GAIN_MASK(ch) (GENMASK(2, 0) << 3 * (ch)) +#define MCP3911_GAIN_VAL(ch, val) ((val << 3 * (ch)) & MCP3911_GAIN_MASK(ch)) #define MCP3911_REG_STATUSCOM 0x0a -#define MCP3911_STATUSCOM_DRHIZ BIT(12) +#define MCP3911_STATUSCOM_DRHIZ BIT(12) #define MCP3911_STATUSCOM_READ GENMASK(7, 6) #define MCP3911_STATUSCOM_CH1_24WIDTH BIT(4) #define MCP3911_STATUSCOM_CH0_24WIDTH BIT(3) @@ -51,8 +51,8 @@ #define MCP3911_REG_GAINCAL_CH1 0x17 #define MCP3911_REG_VREFCAL 0x1a -#define MCP3911_CHANNEL(x) (MCP3911_REG_CHANNEL0 + x * 3) -#define MCP3911_OFFCAL(x) (MCP3911_REG_OFFCAL_CH0 + x * 6) +#define MCP3911_CHANNEL(ch) (MCP3911_REG_CHANNEL0 + (ch) * 3) +#define MCP3911_OFFCAL(ch) (MCP3911_REG_OFFCAL_CH0 + (ch) * 6) /* Internal voltage reference in mV */ #define MCP3911_INT_VREF_MV 1200 @@ -61,12 +61,56 @@ #define MCP3911_REG_WRITE(reg, id) ((((reg) << 1) | ((id) << 6) | (0 << 0)) & 0xff) #define MCP3911_REG_MASK GENMASK(4, 1) -#define MCP3911_NUM_CHANNELS 2 #define MCP3911_NUM_SCALES 6 +/* Registers compatible with MCP3910 */ +#define MCP3910_REG_STATUSCOM 0x0c +#define MCP3910_STATUSCOM_READ GENMASK(23, 22) +#define MCP3910_STATUSCOM_DRHIZ BIT(20) + +#define MCP3910_REG_GAIN 0x0b + +#define MCP3910_REG_CONFIG0 0x0d +#define MCP3910_CONFIG0_EN_OFFCAL BIT(23) +#define MCP3910_CONFIG0_OSR GENMASK(15, 13) + +#define MCP3910_REG_CONFIG1 0x0e +#define MCP3910_CONFIG1_CLKEXT BIT(6) +#define MCP3910_CONFIG1_VREFEXT BIT(7) + +#define MCP3910_REG_OFFCAL_CH0 0x0f +#define MCP3910_OFFCAL(ch) (MCP3910_REG_OFFCAL_CH0 + (ch) * 6) + +/* Maximal number of channels used by the MCP39XX family */ +#define MCP39XX_MAX_NUM_CHANNELS 8 + static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 }; static u32 mcp3911_scale_table[MCP3911_NUM_SCALES][2]; +enum mcp3911_id { + MCP3910, + MCP3911, + MCP3912, + MCP3913, + MCP3914, + MCP3918, + MCP3919, +}; + +struct mcp3911; +struct mcp3911_chip_info { + const struct iio_chan_spec *channels; + unsigned int num_channels; + + int (*config)(struct mcp3911 *adc); + int (*get_osr)(struct mcp3911 *adc, u32 *val); + int (*set_osr)(struct mcp3911 *adc, u32 val); + int (*enable_offset)(struct mcp3911 *adc, bool enable); + int (*get_offset)(struct mcp3911 *adc, int channel, int *val); + int (*set_offset)(struct mcp3911 *adc, int channel, int val); + int (*set_scale)(struct mcp3911 *adc, int channel, u32 val); +}; + struct mcp3911 { struct spi_device *spi; struct mutex lock; @@ -74,14 +118,15 @@ struct mcp3911 { struct clk *clki; u32 dev_addr; struct iio_trigger *trig; - u32 gain[MCP3911_NUM_CHANNELS]; + u32 gain[MCP39XX_MAX_NUM_CHANNELS]; + const struct mcp3911_chip_info *chip; struct { - u32 channels[MCP3911_NUM_CHANNELS]; + u32 channels[MCP39XX_MAX_NUM_CHANNELS]; s64 ts __aligned(8); } scan; u8 tx_buf __aligned(IIO_DMA_MINALIGN); - u8 rx_buf[MCP3911_NUM_CHANNELS * 3]; + u8 rx_buf[MCP39XX_MAX_NUM_CHANNELS * 3]; }; static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len) @@ -111,8 +156,7 @@ static int mcp3911_write(struct mcp3911 *adc, u8 reg, u32 val, u8 len) return spi_write(adc->spi, &val, len + 1); } -static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask, - u32 val, u8 len) +static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask, u32 val, u8 len) { u32 tmp; int ret; @@ -126,9 +170,115 @@ static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask, return mcp3911_write(adc, reg, val, len); } +static int mcp3910_enable_offset(struct mcp3911 *adc, bool enable) +{ + unsigned int mask = MCP3910_CONFIG0_EN_OFFCAL; + unsigned int value = enable ? mask : 0; + + return mcp3911_update(adc, MCP3910_REG_CONFIG0, mask, value, 3); +} + +static int mcp3910_get_offset(struct mcp3911 *adc, int channel, int *val) +{ + return mcp3911_read(adc, MCP3910_OFFCAL(channel), val, 3); +} + +static int mcp3910_set_offset(struct mcp3911 *adc, int channel, int val) +{ + int ret; + + ret = mcp3911_write(adc, MCP3910_OFFCAL(channel), val, 3); + if (ret) + return ret; + + return adc->chip->enable_offset(adc, 1); +} + +static int mcp3911_enable_offset(struct mcp3911 *adc, bool enable) +{ + unsigned int mask = MCP3911_STATUSCOM_EN_OFFCAL; + unsigned int value = enable ? mask : 0; + + return mcp3911_update(adc, MCP3911_REG_STATUSCOM, mask, value, 2); +} + +static int mcp3911_get_offset(struct mcp3911 *adc, int channel, int *val) +{ + return mcp3911_read(adc, MCP3911_OFFCAL(channel), val, 3); +} + +static int mcp3911_set_offset(struct mcp3911 *adc, int channel, int val) +{ + int ret; + + ret = mcp3911_write(adc, MCP3911_OFFCAL(channel), val, 3); + if (ret) + return ret; + + return adc->chip->enable_offset(adc, 1); +} + +static int mcp3910_get_osr(struct mcp3911 *adc, u32 *val) +{ + int ret; + unsigned int osr; + + ret = mcp3911_read(adc, MCP3910_REG_CONFIG0, val, 3); + if (ret) + return ret; + + osr = FIELD_GET(MCP3910_CONFIG0_OSR, *val); + *val = 32 << osr; + return 0; +} + +static int mcp3910_set_osr(struct mcp3911 *adc, u32 val) +{ + unsigned int osr = FIELD_PREP(MCP3910_CONFIG0_OSR, val); + unsigned int mask = MCP3910_CONFIG0_OSR; + + return mcp3911_update(adc, MCP3910_REG_CONFIG0, mask, osr, 3); +} + +static int mcp3911_set_osr(struct mcp3911 *adc, u32 val) +{ + unsigned int osr = FIELD_PREP(MCP3911_CONFIG_OSR, val); + unsigned int mask = MCP3911_CONFIG_OSR; + + return mcp3911_update(adc, MCP3911_REG_CONFIG, mask, osr, 2); +} + +static int mcp3911_get_osr(struct mcp3911 *adc, u32 *val) +{ + int ret; + unsigned int osr; + + ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2); + if (ret) + return ret; + + osr = FIELD_GET(MCP3911_CONFIG_OSR, *val); + *val = 32 << osr; + return ret; +} + +static int mcp3910_set_scale(struct mcp3911 *adc, int channel, u32 val) +{ + return mcp3911_update(adc, MCP3910_REG_GAIN, + MCP3911_GAIN_MASK(channel), + MCP3911_GAIN_VAL(channel, val), 3); +} + +static int mcp3911_set_scale(struct mcp3911 *adc, int channel, u32 val) +{ + return mcp3911_update(adc, MCP3911_REG_GAIN, + MCP3911_GAIN_MASK(channel), + MCP3911_GAIN_VAL(channel, val), 1); +} + static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - long mask) + struct iio_chan_spec const *chan, + long mask) { switch (mask) { case IIO_CHAN_INFO_SCALE: @@ -141,9 +291,9 @@ static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev, } static int mcp3911_read_avail(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - const int **vals, int *type, int *length, - long info) + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long info) { switch (info) { case IIO_CHAN_INFO_OVERSAMPLING_RATIO: @@ -182,20 +332,18 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev, break; case IIO_CHAN_INFO_OFFSET: - ret = mcp3911_read(adc, - MCP3911_OFFCAL(channel->channel), val, 3); + + ret = adc->chip->get_offset(adc, channel->channel, val); if (ret) goto out; ret = IIO_VAL_INT; break; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2); + ret = adc->chip->get_osr(adc, val); if (ret) goto out; - *val = FIELD_GET(MCP3911_CONFIG_OSR, *val); - *val = 32 << *val; ret = IIO_VAL_INT; break; @@ -212,8 +360,8 @@ out: } static int mcp3911_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *channel, int val, - int val2, long mask) + struct iio_chan_spec const *channel, int val, + int val2, long mask) { struct mcp3911 *adc = iio_priv(indio_dev); int ret = -EINVAL; @@ -223,12 +371,10 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: for (int i = 0; i < MCP3911_NUM_SCALES; i++) { if (val == mcp3911_scale_table[i][0] && - val2 == mcp3911_scale_table[i][1]) { + val2 == mcp3911_scale_table[i][1]) { adc->gain[channel->channel] = BIT(i); - ret = mcp3911_update(adc, MCP3911_REG_GAIN, - MCP3911_GAIN_MASK(channel->channel), - MCP3911_GAIN_VAL(channel->channel, i), 1); + ret = adc->chip->set_scale(adc, channel->channel, i); } } break; @@ -238,24 +384,13 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev, goto out; } - /* Write offset */ - ret = mcp3911_write(adc, MCP3911_OFFCAL(channel->channel), val, - 3); - if (ret) - goto out; - - /* Enable offset*/ - ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, - MCP3911_STATUSCOM_EN_OFFCAL, - MCP3911_STATUSCOM_EN_OFFCAL, 2); + ret = adc->chip->set_offset(adc, channel->channel, val); break; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: for (int i = 0; i < ARRAY_SIZE(mcp3911_osr_table); i++) { if (val == mcp3911_osr_table[i]) { - val = FIELD_PREP(MCP3911_CONFIG_OSR, i); - ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR, - val, 2); + ret = adc->chip->set_osr(adc, i); break; } } @@ -269,6 +404,7 @@ out: static int mcp3911_calc_scale_table(struct mcp3911 *adc) { + struct device *dev = &adc->spi->dev; u32 ref = MCP3911_INT_VREF_MV; u32 div; int ret; @@ -277,10 +413,7 @@ static int mcp3911_calc_scale_table(struct mcp3911 *adc) if (adc->vref) { ret = regulator_get_voltage(adc->vref); if (ret < 0) { - dev_err(&adc->spi->dev, - "failed to get vref voltage: %d\n", - ret); - return ret; + return dev_err_probe(dev, ret, "failed to get vref voltage\n"); } ref = ret / 1000; @@ -326,24 +459,73 @@ static int mcp3911_calc_scale_table(struct mcp3911 *adc) }, \ } +static const struct iio_chan_spec mcp3910_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + static const struct iio_chan_spec mcp3911_channels[] = { MCP3911_CHAN(0), MCP3911_CHAN(1), IIO_CHAN_SOFT_TIMESTAMP(2), }; +static const struct iio_chan_spec mcp3912_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + MCP3911_CHAN(2), + MCP3911_CHAN(3), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static const struct iio_chan_spec mcp3913_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + MCP3911_CHAN(2), + MCP3911_CHAN(3), + MCP3911_CHAN(4), + MCP3911_CHAN(5), + IIO_CHAN_SOFT_TIMESTAMP(6), +}; + +static const struct iio_chan_spec mcp3914_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + MCP3911_CHAN(2), + MCP3911_CHAN(3), + MCP3911_CHAN(4), + MCP3911_CHAN(5), + MCP3911_CHAN(6), + MCP3911_CHAN(7), + IIO_CHAN_SOFT_TIMESTAMP(8), +}; + +static const struct iio_chan_spec mcp3918_channels[] = { + MCP3911_CHAN(0), + IIO_CHAN_SOFT_TIMESTAMP(1), +}; + +static const struct iio_chan_spec mcp3919_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + MCP3911_CHAN(2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + static irqreturn_t mcp3911_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct mcp3911 *adc = iio_priv(indio_dev); + struct device *dev = &adc->spi->dev; struct spi_transfer xfer[] = { { .tx_buf = &adc->tx_buf, .len = 1, }, { .rx_buf = adc->rx_buf, - .len = sizeof(adc->rx_buf), + .len = (adc->chip->num_channels - 1) * 3, }, }; int scan_index; @@ -354,8 +536,7 @@ static irqreturn_t mcp3911_trigger_handler(int irq, void *p) adc->tx_buf = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr); ret = spi_sync_transfer(adc->spi, xfer, ARRAY_SIZE(xfer)); if (ret < 0) { - dev_warn(&adc->spi->dev, - "failed to get conversion data\n"); + dev_warn(dev, "failed to get conversion data\n"); goto out; } @@ -387,43 +568,25 @@ static int mcp3911_config(struct mcp3911 *adc) u32 regval; int ret; - ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr); - - /* - * Fallback to "device-addr" due to historical mismatch between - * dt-bindings and implementation - */ - if (ret) - device_property_read_u32(dev, "device-addr", &adc->dev_addr); - if (adc->dev_addr > 3) { - dev_err(&adc->spi->dev, - "invalid device address (%i). Must be in range 0-3.\n", - adc->dev_addr); - return -EINVAL; - } - dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr); - ret = mcp3911_read(adc, MCP3911_REG_CONFIG, ®val, 2); if (ret) return ret; regval &= ~MCP3911_CONFIG_VREFEXT; if (adc->vref) { - dev_dbg(&adc->spi->dev, "use external voltage reference\n"); + dev_dbg(dev, "use external voltage reference\n"); regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 1); } else { - dev_dbg(&adc->spi->dev, - "use internal voltage reference (1.2V)\n"); + dev_dbg(dev, "use internal voltage reference (1.2V)\n"); regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 0); } regval &= ~MCP3911_CONFIG_CLKEXT; if (adc->clki) { - dev_dbg(&adc->spi->dev, "use external clock as clocksource\n"); + dev_dbg(dev, "use external clock as clocksource\n"); regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 1); } else { - dev_dbg(&adc->spi->dev, - "use crystal oscillator as clocksource\n"); + dev_dbg(dev, "use crystal oscillator as clocksource\n"); regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 0); } @@ -439,7 +602,97 @@ static int mcp3911_config(struct mcp3911 *adc) regval &= ~MCP3911_STATUSCOM_READ; regval |= FIELD_PREP(MCP3911_STATUSCOM_READ, 0x02); - return mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2); + regval &= ~MCP3911_STATUSCOM_DRHIZ; + if (device_property_read_bool(dev, "microchip,data-ready-hiz")) + regval |= FIELD_PREP(MCP3911_STATUSCOM_DRHIZ, 0); + else + regval |= FIELD_PREP(MCP3911_STATUSCOM_DRHIZ, 1); + + /* Disable offset to ignore any old values in offset register */ + regval &= ~MCP3911_STATUSCOM_EN_OFFCAL; + + ret = mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2); + if (ret) + return ret; + + /* Set gain to 1 for all channels */ + ret = mcp3911_read(adc, MCP3911_REG_GAIN, ®val, 1); + if (ret) + return ret; + + for (int i = 0; i < adc->chip->num_channels - 1; i++) { + adc->gain[i] = 1; + regval &= ~MCP3911_GAIN_MASK(i); + } + + return mcp3911_write(adc, MCP3911_REG_GAIN, regval, 1); +} + +static int mcp3910_config(struct mcp3911 *adc) +{ + struct device *dev = &adc->spi->dev; + u32 regval; + int ret; + + ret = mcp3911_read(adc, MCP3910_REG_CONFIG1, ®val, 3); + if (ret) + return ret; + + regval &= ~MCP3910_CONFIG1_VREFEXT; + if (adc->vref) { + dev_dbg(dev, "use external voltage reference\n"); + regval |= FIELD_PREP(MCP3910_CONFIG1_VREFEXT, 1); + } else { + dev_dbg(dev, "use internal voltage reference (1.2V)\n"); + regval |= FIELD_PREP(MCP3910_CONFIG1_VREFEXT, 0); + } + + regval &= ~MCP3910_CONFIG1_CLKEXT; + if (adc->clki) { + dev_dbg(dev, "use external clock as clocksource\n"); + regval |= FIELD_PREP(MCP3910_CONFIG1_CLKEXT, 1); + } else { + dev_dbg(dev, "use crystal oscillator as clocksource\n"); + regval |= FIELD_PREP(MCP3910_CONFIG1_CLKEXT, 0); + } + + ret = mcp3911_write(adc, MCP3910_REG_CONFIG1, regval, 3); + if (ret) + return ret; + + ret = mcp3911_read(adc, MCP3910_REG_STATUSCOM, ®val, 3); + if (ret) + return ret; + + /* Address counter incremented, cycle through register types */ + regval &= ~MCP3910_STATUSCOM_READ; + regval |= FIELD_PREP(MCP3910_STATUSCOM_READ, 0x02); + + regval &= ~MCP3910_STATUSCOM_DRHIZ; + if (device_property_read_bool(dev, "microchip,data-ready-hiz")) + regval |= FIELD_PREP(MCP3910_STATUSCOM_DRHIZ, 0); + else + regval |= FIELD_PREP(MCP3910_STATUSCOM_DRHIZ, 1); + + ret = mcp3911_write(adc, MCP3910_REG_STATUSCOM, regval, 3); + if (ret) + return ret; + + /* Set gain to 1 for all channels */ + ret = mcp3911_read(adc, MCP3910_REG_GAIN, ®val, 3); + if (ret) + return ret; + + for (int i = 0; i < adc->chip->num_channels - 1; i++) { + adc->gain[i] = 1; + regval &= ~MCP3911_GAIN_MASK(i); + } + ret = mcp3911_write(adc, MCP3910_REG_GAIN, regval, 3); + if (ret) + return ret; + + /* Disable offset to ignore any old values in offset register */ + return adc->chip->enable_offset(adc, 0); } static void mcp3911_cleanup_regulator(void *vref) @@ -466,26 +719,25 @@ static const struct iio_trigger_ops mcp3911_trigger_ops = { static int mcp3911_probe(struct spi_device *spi) { + struct device *dev = &spi->dev; struct iio_dev *indio_dev; struct mcp3911 *adc; int ret; - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); if (!indio_dev) return -ENOMEM; adc = iio_priv(indio_dev); adc->spi = spi; + adc->chip = spi_get_device_match_data(spi); - adc->vref = devm_regulator_get_optional(&adc->spi->dev, "vref"); + adc->vref = devm_regulator_get_optional(dev, "vref"); if (IS_ERR(adc->vref)) { if (PTR_ERR(adc->vref) == -ENODEV) { adc->vref = NULL; } else { - dev_err(&adc->spi->dev, - "failed to get regulator (%ld)\n", - PTR_ERR(adc->vref)); - return PTR_ERR(adc->vref); + return dev_err_probe(dev, PTR_ERR(adc->vref), "failed to get regulator\n"); } } else { @@ -493,34 +745,35 @@ static int mcp3911_probe(struct spi_device *spi) if (ret) return ret; - ret = devm_add_action_or_reset(&spi->dev, - mcp3911_cleanup_regulator, adc->vref); + ret = devm_add_action_or_reset(dev, mcp3911_cleanup_regulator, adc->vref); if (ret) return ret; } - adc->clki = devm_clk_get_enabled(&adc->spi->dev, NULL); + adc->clki = devm_clk_get_enabled(dev, NULL); if (IS_ERR(adc->clki)) { if (PTR_ERR(adc->clki) == -ENOENT) { adc->clki = NULL; } else { - dev_err(&adc->spi->dev, - "failed to get adc clk (%ld)\n", - PTR_ERR(adc->clki)); - return PTR_ERR(adc->clki); + return dev_err_probe(dev, PTR_ERR(adc->clki), "failed to get adc clk\n"); } } - ret = mcp3911_config(adc); + /* + * Fallback to "device-addr" due to historical mismatch between + * dt-bindings and implementation. + */ + ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr); if (ret) - return ret; + device_property_read_u32(dev, "device-addr", &adc->dev_addr); + if (adc->dev_addr > 3) { + return dev_err_probe(dev, -EINVAL, + "invalid device address (%i). Must be in range 0-3.\n", + adc->dev_addr); + } + dev_dbg(dev, "use device address %i\n", adc->dev_addr); - if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz")) - ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ, - 0, 2); - else - ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ, - MCP3911_STATUSCOM_DRHIZ, 2); + ret = adc->chip->config(adc); if (ret) return ret; @@ -528,12 +781,12 @@ static int mcp3911_probe(struct spi_device *spi) if (ret) return ret; - /* Set gain to 1 for all channels */ - for (int i = 0; i < MCP3911_NUM_CHANNELS; i++) { + /* Set gain to 1 for all channels */ + for (int i = 0; i < adc->chip->num_channels - 1; i++) { adc->gain[i] = 1; ret = mcp3911_update(adc, MCP3911_REG_GAIN, - MCP3911_GAIN_MASK(i), - MCP3911_GAIN_VAL(i, 0), 1); + MCP3911_GAIN_MASK(i), + MCP3911_GAIN_VAL(i, 0), 1); if (ret) return ret; } @@ -543,21 +796,20 @@ static int mcp3911_probe(struct spi_device *spi) indio_dev->info = &mcp3911_info; spi_set_drvdata(spi, indio_dev); - indio_dev->channels = mcp3911_channels; - indio_dev->num_channels = ARRAY_SIZE(mcp3911_channels); + indio_dev->channels = adc->chip->channels; + indio_dev->num_channels = adc->chip->num_channels; mutex_init(&adc->lock); if (spi->irq > 0) { - adc->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d", - indio_dev->name, - iio_device_id(indio_dev)); + adc->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name, + iio_device_id(indio_dev)); if (!adc->trig) return -ENOMEM; adc->trig->ops = &mcp3911_trigger_ops; iio_trigger_set_drvdata(adc->trig, adc); - ret = devm_iio_trigger_register(&spi->dev, adc->trig); + ret = devm_iio_trigger_register(dev, adc->trig); if (ret) return ret; @@ -566,30 +818,120 @@ static int mcp3911_probe(struct spi_device *spi) * Some platforms might not allow the option to power it down so * don't enable the interrupt to avoid extra load on the system. */ - ret = devm_request_irq(&spi->dev, spi->irq, - &iio_trigger_generic_data_rdy_poll, IRQF_NO_AUTOEN | IRQF_ONESHOT, - indio_dev->name, adc->trig); + ret = devm_request_irq(dev, spi->irq, &iio_trigger_generic_data_rdy_poll, + IRQF_NO_AUTOEN | IRQF_ONESHOT, + indio_dev->name, adc->trig); if (ret) return ret; } - ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, - NULL, - mcp3911_trigger_handler, NULL); + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + mcp3911_trigger_handler, NULL); if (ret) return ret; - return devm_iio_device_register(&adc->spi->dev, indio_dev); + return devm_iio_device_register(dev, indio_dev); } +static const struct mcp3911_chip_info mcp3911_chip_info[] = { + [MCP3910] = { + .channels = mcp3910_channels, + .num_channels = ARRAY_SIZE(mcp3910_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3911] = { + .channels = mcp3911_channels, + .num_channels = ARRAY_SIZE(mcp3911_channels), + .config = mcp3911_config, + .get_osr = mcp3911_get_osr, + .set_osr = mcp3911_set_osr, + .enable_offset = mcp3911_enable_offset, + .get_offset = mcp3911_get_offset, + .set_offset = mcp3911_set_offset, + .set_scale = mcp3911_set_scale, + }, + [MCP3912] = { + .channels = mcp3912_channels, + .num_channels = ARRAY_SIZE(mcp3912_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3913] = { + .channels = mcp3913_channels, + .num_channels = ARRAY_SIZE(mcp3913_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3914] = { + .channels = mcp3914_channels, + .num_channels = ARRAY_SIZE(mcp3914_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3918] = { + .channels = mcp3918_channels, + .num_channels = ARRAY_SIZE(mcp3918_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3919] = { + .channels = mcp3919_channels, + .num_channels = ARRAY_SIZE(mcp3919_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, +}; static const struct of_device_id mcp3911_dt_ids[] = { - { .compatible = "microchip,mcp3911" }, + { .compatible = "microchip,mcp3910", .data = &mcp3911_chip_info[MCP3910] }, + { .compatible = "microchip,mcp3911", .data = &mcp3911_chip_info[MCP3911] }, + { .compatible = "microchip,mcp3912", .data = &mcp3911_chip_info[MCP3912] }, + { .compatible = "microchip,mcp3913", .data = &mcp3911_chip_info[MCP3913] }, + { .compatible = "microchip,mcp3914", .data = &mcp3911_chip_info[MCP3914] }, + { .compatible = "microchip,mcp3918", .data = &mcp3911_chip_info[MCP3918] }, + { .compatible = "microchip,mcp3919", .data = &mcp3911_chip_info[MCP3919] }, { } }; MODULE_DEVICE_TABLE(of, mcp3911_dt_ids); static const struct spi_device_id mcp3911_id[] = { - { "mcp3911", 0 }, + { "mcp3910", (kernel_ulong_t)&mcp3911_chip_info[MCP3910] }, + { "mcp3911", (kernel_ulong_t)&mcp3911_chip_info[MCP3911] }, + { "mcp3912", (kernel_ulong_t)&mcp3911_chip_info[MCP3912] }, + { "mcp3913", (kernel_ulong_t)&mcp3911_chip_info[MCP3913] }, + { "mcp3914", (kernel_ulong_t)&mcp3911_chip_info[MCP3914] }, + { "mcp3918", (kernel_ulong_t)&mcp3911_chip_info[MCP3918] }, + { "mcp3919", (kernel_ulong_t)&mcp3911_chip_info[MCP3919] }, { } }; MODULE_DEVICE_TABLE(spi, mcp3911_id); diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index 57cfabe80c..13b473d8c6 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -1045,8 +1045,10 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev) u32 regval; ret = meson_sar_adc_lock(indio_dev); - if (ret) + if (ret) { + dev_err(dev, "failed to lock adc\n"); goto err_lock; + } ret = regulator_enable(priv->vref); if (ret < 0) { @@ -1368,15 +1370,15 @@ static int meson_sar_adc_probe(struct platform_device *pdev) priv->regmap = devm_regmap_init_mmio(dev, base, priv->param->regmap_config); if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); + return dev_err_probe(dev, PTR_ERR(priv->regmap), "failed to init regmap\n"); irq = irq_of_parse_and_map(dev->of_node, 0); if (!irq) - return -EINVAL; + return dev_err_probe(dev, -EINVAL, "failed to get irq\n"); ret = devm_request_irq(dev, irq, meson_sar_adc_irq, IRQF_SHARED, dev_name(dev), indio_dev); if (ret) - return ret; + return dev_err_probe(dev, ret, "failed to request irq\n"); priv->clkin = devm_clk_get(dev, "clkin"); if (IS_ERR(priv->clkin)) @@ -1398,7 +1400,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev) if (!priv->adc_clk) { ret = meson_sar_adc_clk_init(indio_dev, base); if (ret) - return ret; + return dev_err_probe(dev, ret, "failed to init internal clk\n"); } priv->vref = devm_regulator_get(dev, "vref"); @@ -1440,8 +1442,10 @@ static int meson_sar_adc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, indio_dev); ret = iio_device_register(indio_dev); - if (ret) + if (ret) { + dev_err_probe(dev, ret, "failed to register iio device\n"); goto err_hw; + } return 0; @@ -1451,15 +1455,13 @@ err: return ret; } -static int meson_sar_adc_remove(struct platform_device *pdev) +static void meson_sar_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); iio_device_unregister(indio_dev); meson_sar_adc_hw_disable(indio_dev); - - return 0; } static int meson_sar_adc_suspend(struct device *dev) @@ -1494,7 +1496,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(meson_sar_adc_pm_ops, static struct platform_driver meson_sar_adc_driver = { .probe = meson_sar_adc_probe, - .remove = meson_sar_adc_remove, + .remove_new = meson_sar_adc_remove, .driver = { .name = "meson-saradc", .of_match_table = meson_sar_adc_of_match, diff --git a/drivers/iio/adc/mp2629_adc.c b/drivers/iio/adc/mp2629_adc.c index 88e947f300..7c66c2cd5b 100644 --- a/drivers/iio/adc/mp2629_adc.c +++ b/drivers/iio/adc/mp2629_adc.c @@ -171,7 +171,7 @@ fail_disable: return ret; } -static int mp2629_adc_remove(struct platform_device *pdev) +static void mp2629_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct mp2629_adc *info = iio_priv(indio_dev); @@ -184,8 +184,6 @@ static int mp2629_adc_remove(struct platform_device *pdev) MP2629_ADC_CONTINUOUS, 0); regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL, MP2629_ADC_START, 0); - - return 0; } static const struct of_device_id mp2629_adc_of_match[] = { @@ -200,7 +198,7 @@ static struct platform_driver mp2629_adc_driver = { .of_match_table = mp2629_adc_of_match, }, .probe = mp2629_adc_probe, - .remove = mp2629_adc_remove, + .remove_new = mp2629_adc_remove, }; module_platform_driver(mp2629_adc_driver); diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c index 0e134777bd..3343b54e8e 100644 --- a/drivers/iio/adc/mt6577_auxadc.c +++ b/drivers/iio/adc/mt6577_auxadc.c @@ -246,6 +246,14 @@ static int mt6577_auxadc_suspend(struct device *dev) return 0; } +static void mt6577_power_off(void *data) +{ + struct mt6577_auxadc_device *adc_dev = data; + + mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC, + 0, MT6577_AUXADC_PDN_EN); +} + static int mt6577_auxadc_probe(struct platform_device *pdev) { struct mt6577_auxadc_device *adc_dev; @@ -265,29 +273,18 @@ static int mt6577_auxadc_probe(struct platform_device *pdev) indio_dev->num_channels = ARRAY_SIZE(mt6577_auxadc_iio_channels); adc_dev->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(adc_dev->reg_base)) { - dev_err(&pdev->dev, "failed to get auxadc base address\n"); - return PTR_ERR(adc_dev->reg_base); - } - - adc_dev->adc_clk = devm_clk_get(&pdev->dev, "main"); - if (IS_ERR(adc_dev->adc_clk)) { - dev_err(&pdev->dev, "failed to get auxadc clock\n"); - return PTR_ERR(adc_dev->adc_clk); - } + if (IS_ERR(adc_dev->reg_base)) + return dev_err_probe(&pdev->dev, PTR_ERR(adc_dev->reg_base), + "failed to get auxadc base address\n"); - ret = clk_prepare_enable(adc_dev->adc_clk); - if (ret) { - dev_err(&pdev->dev, "failed to enable auxadc clock\n"); - return ret; - } + adc_dev->adc_clk = devm_clk_get_enabled(&pdev->dev, "main"); + if (IS_ERR(adc_dev->adc_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(adc_dev->adc_clk), + "failed to enable auxadc clock\n"); adc_clk_rate = clk_get_rate(adc_dev->adc_clk); - if (!adc_clk_rate) { - ret = -EINVAL; - dev_err(&pdev->dev, "null clock rate\n"); - goto err_disable_clk; - } + if (!adc_clk_rate) + return dev_err_probe(&pdev->dev, -EINVAL, "null clock rate\n"); adc_dev->dev_comp = device_get_match_data(&pdev->dev); @@ -296,36 +293,16 @@ static int mt6577_auxadc_probe(struct platform_device *pdev) mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC, MT6577_AUXADC_PDN_EN, 0); mdelay(MT6577_AUXADC_POWER_READY_MS); - platform_set_drvdata(pdev, indio_dev); - ret = iio_device_register(indio_dev); - if (ret < 0) { - dev_err(&pdev->dev, "failed to register iio device\n"); - goto err_power_off; - } - - return 0; - -err_power_off: - mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC, - 0, MT6577_AUXADC_PDN_EN); -err_disable_clk: - clk_disable_unprepare(adc_dev->adc_clk); - return ret; -} - -static int mt6577_auxadc_remove(struct platform_device *pdev) -{ - struct iio_dev *indio_dev = platform_get_drvdata(pdev); - struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); + ret = devm_add_action_or_reset(&pdev->dev, mt6577_power_off, adc_dev); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "Failed to add action to managed power off\n"); - mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC, - 0, MT6577_AUXADC_PDN_EN); - - clk_disable_unprepare(adc_dev->adc_clk); + ret = devm_iio_device_register(&pdev->dev, indio_dev); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, "failed to register iio device\n"); return 0; } @@ -352,7 +329,6 @@ static struct platform_driver mt6577_auxadc_driver = { .pm = pm_sleep_ptr(&mt6577_auxadc_pm_ops), }, .probe = mt6577_auxadc_probe, - .remove = mt6577_auxadc_remove, }; module_platform_driver(mt6577_auxadc_driver); diff --git a/drivers/iio/adc/mxs-lradc-adc.c b/drivers/iio/adc/mxs-lradc-adc.c index a50f39143d..2e60c10ee4 100644 --- a/drivers/iio/adc/mxs-lradc-adc.c +++ b/drivers/iio/adc/mxs-lradc-adc.c @@ -807,7 +807,7 @@ err_trig: return ret; } -static int mxs_lradc_adc_remove(struct platform_device *pdev) +static void mxs_lradc_adc_remove(struct platform_device *pdev) { struct iio_dev *iio = platform_get_drvdata(pdev); struct mxs_lradc_adc *adc = iio_priv(iio); @@ -816,8 +816,6 @@ static int mxs_lradc_adc_remove(struct platform_device *pdev) mxs_lradc_adc_hw_stop(adc); iio_triggered_buffer_cleanup(iio); mxs_lradc_adc_trigger_remove(iio); - - return 0; } static struct platform_driver mxs_lradc_adc_driver = { @@ -825,7 +823,7 @@ static struct platform_driver mxs_lradc_adc_driver = { .name = "mxs-lradc-adc", }, .probe = mxs_lradc_adc_probe, - .remove = mxs_lradc_adc_remove, + .remove_new = mxs_lradc_adc_remove, }; module_platform_driver(mxs_lradc_adc_driver); diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c index 3d9207c160..3a55465951 100644 --- a/drivers/iio/adc/npcm_adc.c +++ b/drivers/iio/adc/npcm_adc.c @@ -320,7 +320,7 @@ err_disable_clk: return ret; } -static int npcm_adc_remove(struct platform_device *pdev) +static void npcm_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct npcm_adc *info = iio_priv(indio_dev); @@ -333,13 +333,11 @@ static int npcm_adc_remove(struct platform_device *pdev) if (!IS_ERR(info->vref)) regulator_disable(info->vref); clk_disable_unprepare(info->adc_clk); - - return 0; } static struct platform_driver npcm_adc_driver = { .probe = npcm_adc_probe, - .remove = npcm_adc_remove, + .remove_new = npcm_adc_remove, .driver = { .name = "npcm_adc", .of_match_table = npcm_adc_match, diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c index e202ea18af..203cbbc707 100644 --- a/drivers/iio/adc/palmas_gpadc.c +++ b/drivers/iio/adc/palmas_gpadc.c @@ -457,7 +457,7 @@ static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc, * * The gain error include both gain error, as specified in the datasheet, and * the gain error drift. These paramenters vary depending on device and whether - * the the channel is calibrated (trimmed) or not. + * the channel is calibrated (trimmed) or not. */ static int palmas_gpadc_threshold_with_tolerance(int val, const int INL, const int gain_error, diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c index 64a3aeb626..01c5586df5 100644 --- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -957,7 +957,7 @@ out_disable_vref: return ret; } -static int pm8xxx_xoadc_remove(struct platform_device *pdev) +static void pm8xxx_xoadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct pm8xxx_xoadc *adc = iio_priv(indio_dev); @@ -965,8 +965,6 @@ static int pm8xxx_xoadc_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); regulator_disable(adc->vref); - - return 0; } static const struct xoadc_variant pm8018_variant = { @@ -1019,7 +1017,7 @@ static struct platform_driver pm8xxx_xoadc_driver = { .of_match_table = pm8xxx_xoadc_id_table, }, .probe = pm8xxx_xoadc_probe, - .remove = pm8xxx_xoadc_remove, + .remove_new = pm8xxx_xoadc_remove, }; module_platform_driver(pm8xxx_xoadc_driver); diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c index b8972f673c..d524f2e8e9 100644 --- a/drivers/iio/adc/rcar-gyroadc.c +++ b/drivers/iio/adc/rcar-gyroadc.c @@ -559,7 +559,7 @@ err_clk_if_enable: return ret; } -static int rcar_gyroadc_remove(struct platform_device *pdev) +static void rcar_gyroadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct rcar_gyroadc *priv = iio_priv(indio_dev); @@ -573,8 +573,6 @@ static int rcar_gyroadc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); clk_disable_unprepare(priv->clk); rcar_gyroadc_deinit_supplies(indio_dev); - - return 0; } static int rcar_gyroadc_suspend(struct device *dev) @@ -603,7 +601,7 @@ static const struct dev_pm_ops rcar_gyroadc_pm_ops = { static struct platform_driver rcar_gyroadc_driver = { .probe = rcar_gyroadc_probe, - .remove = rcar_gyroadc_remove, + .remove_new = rcar_gyroadc_remove, .driver = { .name = DRIVER_NAME, .of_match_table = rcar_gyroadc_match, diff --git a/drivers/iio/adc/spear_adc.c b/drivers/iio/adc/spear_adc.c index ad54ef7981..71362c2ddf 100644 --- a/drivers/iio/adc/spear_adc.c +++ b/drivers/iio/adc/spear_adc.c @@ -274,10 +274,9 @@ static int spear_adc_probe(struct platform_device *pdev) int irq; indio_dev = devm_iio_device_alloc(dev, sizeof(struct spear_adc_state)); - if (!indio_dev) { - dev_err(dev, "failed allocating iio device\n"); - return -ENOMEM; - } + if (!indio_dev) + return dev_err_probe(dev, -ENOMEM, + "failed allocating iio device\n"); st = iio_priv(indio_dev); @@ -297,37 +296,24 @@ static int spear_adc_probe(struct platform_device *pdev) st->adc_base_spear3xx = (struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx; - st->clk = devm_clk_get(dev, NULL); - if (IS_ERR(st->clk)) { - dev_err(dev, "failed getting clock\n"); - return PTR_ERR(st->clk); - } - - ret = clk_prepare_enable(st->clk); - if (ret) { - dev_err(dev, "failed enabling clock\n"); - return ret; - } + st->clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(st->clk)) + return dev_err_probe(dev, PTR_ERR(st->clk), + "failed enabling clock\n"); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto errout2; - } + if (irq < 0) + return irq; ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME, st); - if (ret < 0) { - dev_err(dev, "failed requesting interrupt\n"); - goto errout2; - } + if (ret < 0) + return dev_err_probe(dev, ret, "failed requesting interrupt\n"); if (of_property_read_u32(np, "sampling-frequency", - &st->sampling_freq)) { - dev_err(dev, "sampling-frequency missing in DT\n"); - ret = -EINVAL; - goto errout2; - } + &st->sampling_freq)) + return dev_err_probe(dev, -EINVAL, + "sampling-frequency missing in DT\n"); /* * Optional avg_samples defaults to 0, resulting in single data @@ -343,8 +329,6 @@ static int spear_adc_probe(struct platform_device *pdev) spear_adc_configure(st); - platform_set_drvdata(pdev, indio_dev); - init_completion(&st->completion); indio_dev->name = SPEAR_ADC_MOD_NAME; @@ -353,28 +337,13 @@ static int spear_adc_probe(struct platform_device *pdev) indio_dev->channels = spear_adc_iio_channels; indio_dev->num_channels = ARRAY_SIZE(spear_adc_iio_channels); - ret = iio_device_register(indio_dev); + ret = devm_iio_device_register(dev, indio_dev); if (ret) - goto errout2; + return ret; dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq); return 0; - -errout2: - clk_disable_unprepare(st->clk); - return ret; -} - -static int spear_adc_remove(struct platform_device *pdev) -{ - struct iio_dev *indio_dev = platform_get_drvdata(pdev); - struct spear_adc_state *st = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - clk_disable_unprepare(st->clk); - - return 0; } #ifdef CONFIG_OF @@ -387,7 +356,6 @@ MODULE_DEVICE_TABLE(of, spear_adc_dt_ids); static struct platform_driver spear_adc_driver = { .probe = spear_adc_probe, - .remove = spear_adc_remove, .driver = { .name = SPEAR_ADC_MOD_NAME, .of_match_table = of_match_ptr(spear_adc_dt_ids), diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c index bbd5bdd732..616dd72966 100644 --- a/drivers/iio/adc/stm32-adc-core.c +++ b/drivers/iio/adc/stm32-adc-core.c @@ -17,10 +17,11 @@ #include <linux/irqdomain.h> #include <linux/mfd/syscon.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> @@ -708,8 +709,6 @@ static int stm32_adc_probe(struct platform_device *pdev) struct stm32_adc_priv *priv; struct device *dev = &pdev->dev; struct device_node *np = pdev->dev.of_node; - const struct of_device_id *of_id; - struct resource *res; u32 max_rate; int ret; @@ -722,11 +721,7 @@ static int stm32_adc_probe(struct platform_device *pdev) return -ENOMEM; platform_set_drvdata(pdev, &priv->common); - of_id = of_match_device(dev->driver->of_match_table, dev); - if (!of_id) - return -ENODEV; - - priv->cfg = (const struct stm32_adc_priv_cfg *)of_id->data; + priv->cfg = device_get_match_data(dev); priv->nb_adc_max = priv->cfg->num_adcs; spin_lock_init(&priv->common.lock); @@ -819,7 +814,7 @@ err_pm_stop: return ret; } -static int stm32_adc_remove(struct platform_device *pdev) +static void stm32_adc_remove(struct platform_device *pdev) { struct stm32_adc_common *common = platform_get_drvdata(pdev); struct stm32_adc_priv *priv = to_stm32_adc_priv(common); @@ -831,8 +826,6 @@ static int stm32_adc_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - - return 0; } static int stm32_adc_core_runtime_suspend(struct device *dev) @@ -913,7 +906,7 @@ MODULE_DEVICE_TABLE(of, stm32_adc_of_match); static struct platform_driver stm32_adc_driver = { .probe = stm32_adc_probe, - .remove = stm32_adc_remove, + .remove_new = stm32_adc_remove, .driver = { .name = "stm32-adc-core", .of_match_table = stm32_adc_of_match, diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c index f7613efb87..b5d3c9cea5 100644 --- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -2209,7 +2209,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, ret = -EINVAL; goto err; } - strncpy(adc->chan_name[val], name, STM32_ADC_CH_SZ); + strscpy(adc->chan_name[val], name, STM32_ADC_CH_SZ); ret = stm32_adc_populate_int_ch(indio_dev, name, val); if (ret == -ENOENT) continue; @@ -2513,7 +2513,7 @@ err_dma_disable: return ret; } -static int stm32_adc_remove(struct platform_device *pdev) +static void stm32_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct stm32_adc *adc = iio_priv(indio_dev); @@ -2532,8 +2532,6 @@ static int stm32_adc_remove(struct platform_device *pdev) adc->rx_buf, adc->rx_dma_buf); dma_release_channel(adc->dma_chan); } - - return 0; } static int stm32_adc_suspend(struct device *dev) @@ -2659,7 +2657,7 @@ MODULE_DEVICE_TABLE(of, stm32_adc_of_match); static struct platform_driver stm32_adc_driver = { .probe = stm32_adc_probe, - .remove = stm32_adc_remove, + .remove_new = stm32_adc_remove, .driver = { .name = "stm32-adc", .of_match_table = stm32_adc_of_match, diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index b5cc43d12b..ca08ae3108 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -1620,7 +1620,7 @@ err_cleanup: return ret; } -static int stm32_dfsdm_adc_remove(struct platform_device *pdev) +static void stm32_dfsdm_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); @@ -1629,8 +1629,6 @@ static int stm32_dfsdm_adc_remove(struct platform_device *pdev) of_platform_depopulate(&pdev->dev); iio_device_unregister(indio_dev); stm32_dfsdm_dma_release(indio_dev); - - return 0; } static int stm32_dfsdm_adc_suspend(struct device *dev) @@ -1677,7 +1675,7 @@ static struct platform_driver stm32_dfsdm_adc_driver = { .pm = pm_sleep_ptr(&stm32_dfsdm_adc_pm_ops), }, .probe = stm32_dfsdm_adc_probe, - .remove = stm32_dfsdm_adc_remove, + .remove_new = stm32_dfsdm_adc_remove, }; module_platform_driver(stm32_dfsdm_adc_driver); diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c index 0f6ebb3061..a05d978b8c 100644 --- a/drivers/iio/adc/stm32-dfsdm-core.c +++ b/drivers/iio/adc/stm32-dfsdm-core.c @@ -436,7 +436,7 @@ pm_put: return ret; } -static int stm32_dfsdm_core_remove(struct platform_device *pdev) +static void stm32_dfsdm_core_remove(struct platform_device *pdev) { struct stm32_dfsdm *dfsdm = platform_get_drvdata(pdev); @@ -446,8 +446,6 @@ static int stm32_dfsdm_core_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); stm32_dfsdm_clk_disable_unprepare(dfsdm); - - return 0; } static int stm32_dfsdm_core_suspend(struct device *dev) @@ -508,7 +506,7 @@ static const struct dev_pm_ops stm32_dfsdm_core_pm_ops = { static struct platform_driver stm32_dfsdm_driver = { .probe = stm32_dfsdm_probe, - .remove = stm32_dfsdm_core_remove, + .remove_new = stm32_dfsdm_core_remove, .driver = { .name = "stm32-dfsdm", .of_match_table = stm32_dfsdm_of_match, diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c index 25bba96367..100ecced5f 100644 --- a/drivers/iio/adc/sun4i-gpadc-iio.c +++ b/drivers/iio/adc/sun4i-gpadc-iio.c @@ -669,7 +669,7 @@ err_map: return ret; } -static int sun4i_gpadc_remove(struct platform_device *pdev) +static void sun4i_gpadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct sun4i_gpadc_iio *info = iio_priv(indio_dev); @@ -678,12 +678,10 @@ static int sun4i_gpadc_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); if (!IS_ENABLED(CONFIG_THERMAL_OF)) - return 0; + return; if (!info->no_irq) iio_map_array_unregister(indio_dev); - - return 0; } static const struct platform_device_id sun4i_gpadc_id[] = { @@ -702,7 +700,7 @@ static struct platform_driver sun4i_gpadc_driver = { }, .id_table = sun4i_gpadc_id, .probe = sun4i_gpadc_probe, - .remove = sun4i_gpadc_remove, + .remove_new = sun4i_gpadc_remove, }; MODULE_DEVICE_TABLE(of, sun4i_gpadc_of_id); diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index 50c450e7a5..6c2cb3dabb 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -154,7 +154,6 @@ static void adc081c_reg_disable(void *reg) static int adc081c_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct iio_dev *iio; struct adc081c *adc; const struct adcxx1c_model *model; @@ -163,10 +162,7 @@ static int adc081c_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EOPNOTSUPP; - if (dev_fwnode(&client->dev)) - model = device_get_match_data(&client->dev); - else - model = &adcxx1c_models[id->driver_data]; + model = i2c_get_match_data(client); iio = devm_iio_device_alloc(&client->dev, sizeof(*adc)); if (!iio) @@ -207,9 +203,9 @@ static int adc081c_probe(struct i2c_client *client) } static const struct i2c_device_id adc081c_id[] = { - { "adc081c", ADC081C }, - { "adc101c", ADC101C }, - { "adc121c", ADC121C }, + { "adc081c", (kernel_ulong_t)&adcxx1c_models[ADC081C] }, + { "adc101c", (kernel_ulong_t)&adcxx1c_models[ADC101C] }, + { "adc121c", (kernel_ulong_t)&adcxx1c_models[ADC121C] }, { } }; MODULE_DEVICE_TABLE(i2c, adc081c_id); diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c index 075c75a875..6799ea49db 100644 --- a/drivers/iio/adc/ti-ads1015.c +++ b/drivers/iio/adc/ti-ads1015.c @@ -976,16 +976,13 @@ static int ads1015_set_conv_mode(struct ads1015_data *data, int mode) static int ads1015_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); const struct ads1015_chip_data *chip; struct iio_dev *indio_dev; struct ads1015_data *data; int ret; int i; - chip = device_get_match_data(&client->dev); - if (!chip) - chip = (const struct ads1015_chip_data *)id->driver_data; + chip = i2c_get_match_data(client); if (!chip) return dev_err_probe(&client->dev, -EINVAL, "Unknown chip\n"); @@ -1047,11 +1044,13 @@ static int ads1015_probe(struct i2c_client *client) 1 << ADS1015_CFG_COMP_LAT_SHIFT; switch (irq_trig) { + case IRQF_TRIGGER_FALLING: case IRQF_TRIGGER_LOW: cfg_comp |= ADS1015_CFG_COMP_POL_LOW << ADS1015_CFG_COMP_POL_SHIFT; break; case IRQF_TRIGGER_HIGH: + case IRQF_TRIGGER_RISING: cfg_comp |= ADS1015_CFG_COMP_POL_HIGH << ADS1015_CFG_COMP_POL_SHIFT; break; diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 5f87959869..95fa857e8a 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -683,7 +683,7 @@ err_dma: return err; } -static int tiadc_remove(struct platform_device *pdev) +static void tiadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct tiadc_device *adc_dev = iio_priv(indio_dev); @@ -699,8 +699,6 @@ static int tiadc_remove(struct platform_device *pdev) step_en = get_adc_step_mask(adc_dev); am335x_tsc_se_clr(adc_dev->mfd_tscadc, step_en); - - return 0; } static int tiadc_suspend(struct device *dev) @@ -749,7 +747,7 @@ static struct platform_driver tiadc_driver = { .of_match_table = ti_adc_dt_ids, }, .probe = tiadc_probe, - .remove = tiadc_remove, + .remove_new = tiadc_remove, }; module_platform_driver(tiadc_driver); diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c index c279c4f2c9..4a247ca25a 100644 --- a/drivers/iio/adc/twl4030-madc.c +++ b/drivers/iio/adc/twl4030-madc.c @@ -892,7 +892,7 @@ err_current_generator: return ret; } -static int twl4030_madc_remove(struct platform_device *pdev) +static void twl4030_madc_remove(struct platform_device *pdev) { struct iio_dev *iio_dev = platform_get_drvdata(pdev); struct twl4030_madc_data *madc = iio_priv(iio_dev); @@ -903,8 +903,6 @@ static int twl4030_madc_remove(struct platform_device *pdev) twl4030_madc_set_power(madc, 0); regulator_disable(madc->usb3v1); - - return 0; } #ifdef CONFIG_OF @@ -917,7 +915,7 @@ MODULE_DEVICE_TABLE(of, twl_madc_of_match); static struct platform_driver twl4030_madc_driver = { .probe = twl4030_madc_probe, - .remove = twl4030_madc_remove, + .remove_new = twl4030_madc_remove, .driver = { .name = "twl4030_madc", .of_match_table = of_match_ptr(twl_madc_of_match), diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c index 32873fb5f3..78bf55438b 100644 --- a/drivers/iio/adc/twl6030-gpadc.c +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -16,9 +16,10 @@ */ #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/of_platform.h> +#include <linux/property.h> #include <linux/mfd/twl.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -879,17 +880,14 @@ static int twl6030_gpadc_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct twl6030_gpadc_data *gpadc; const struct twl6030_gpadc_platform_data *pdata; - const struct of_device_id *match; struct iio_dev *indio_dev; int irq; int ret; - match = of_match_device(of_twl6030_match_tbl, dev); - if (!match) + pdata = device_get_match_data(&pdev->dev); + if (!pdata) return -EINVAL; - pdata = match->data; - indio_dev = devm_iio_device_alloc(dev, sizeof(*gpadc)); if (!indio_dev) return -ENOMEM; @@ -968,14 +966,12 @@ static int twl6030_gpadc_probe(struct platform_device *pdev) return iio_device_register(indio_dev); } -static int twl6030_gpadc_remove(struct platform_device *pdev) +static void twl6030_gpadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); twl6030_gpadc_disable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); iio_device_unregister(indio_dev); - - return 0; } static int twl6030_gpadc_suspend(struct device *pdev) @@ -1007,7 +1003,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(twl6030_gpadc_pm_ops, twl6030_gpadc_suspend, static struct platform_driver twl6030_gpadc_driver = { .probe = twl6030_gpadc_probe, - .remove = twl6030_gpadc_remove, + .remove_new = twl6030_gpadc_remove, .driver = { .name = DRIVER_NAME, .pm = pm_sleep_ptr(&twl6030_gpadc_pm_ops), diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index ae31aafd26..e4548df3f8 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -916,7 +916,7 @@ error_adc_clk_enable: return ret; } -static int vf610_adc_remove(struct platform_device *pdev) +static void vf610_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct vf610_adc *info = iio_priv(indio_dev); @@ -925,8 +925,6 @@ static int vf610_adc_remove(struct platform_device *pdev) iio_triggered_buffer_cleanup(indio_dev); regulator_disable(info->vref); clk_disable_unprepare(info->clk); - - return 0; } static int vf610_adc_suspend(struct device *dev) @@ -974,7 +972,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend, static struct platform_driver vf610_adc_driver = { .probe = vf610_adc_probe, - .remove = vf610_adc_remove, + .remove_new = vf610_adc_remove, .driver = { .name = DRIVER_NAME, .of_match_table = vf610_adc_match, diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig index 397544f23b..16876b8b5c 100644 --- a/drivers/iio/addac/Kconfig +++ b/drivers/iio/addac/Kconfig @@ -40,6 +40,7 @@ config STX104 select REGMAP_MMIO select GPIOLIB select GPIO_REGMAP + select I8254 help Say yes here to build support for the Apex Embedded Systems STX104 integrated analog PC/104 card. diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c index 6b0e8218f1..7af3e4b8fe 100644 --- a/drivers/iio/addac/ad74413r.c +++ b/drivers/iio/addac/ad74413r.c @@ -442,11 +442,29 @@ static int ad74413r_set_channel_function(struct ad74413r_state *st, int ret; ret = regmap_update_bits(st->regmap, + AD74413R_REG_CH_FUNC_SETUP_X(channel), + AD74413R_CH_FUNC_SETUP_MASK, + CH_FUNC_HIGH_IMPEDANCE); + if (ret) + return ret; + + /* Set DAC code to 0 prior to changing channel function */ + ret = ad74413r_set_channel_dac_code(st, channel, 0); + if (ret) + return ret; + + /* Delay required before transition to new desired mode */ + usleep_range(130, 150); + + ret = regmap_update_bits(st->regmap, AD74413R_REG_CH_FUNC_SETUP_X(channel), AD74413R_CH_FUNC_SETUP_MASK, func); if (ret) return ret; + /* Delay required before updating the new DAC code */ + usleep_range(150, 170); + if (func == CH_FUNC_CURRENT_INPUT_LOOP_POWER) ret = regmap_set_bits(st->regmap, AD74413R_REG_ADC_CONFIG_X(channel), @@ -705,8 +723,8 @@ static int ad74413r_get_input_current_scale(struct ad74413r_state *st, return IIO_VAL_FRACTIONAL; } -static int ad74413_get_input_current_offset(struct ad74413r_state *st, - unsigned int channel, int *val) +static int ad74413r_get_input_current_offset(struct ad74413r_state *st, + unsigned int channel, int *val) { unsigned int range; int voltage_range; @@ -991,7 +1009,7 @@ static int ad74413r_read_raw(struct iio_dev *indio_dev, return ad74413r_get_input_voltage_offset(st, chan->channel, val); case IIO_CURRENT: - return ad74413_get_input_current_offset(st, + return ad74413r_get_input_current_offset(st, chan->channel, val); default: return -EINVAL; diff --git a/drivers/iio/addac/stx104.c b/drivers/iio/addac/stx104.c index d1f7ce033b..6946a65512 100644 --- a/drivers/iio/addac/stx104.c +++ b/drivers/iio/addac/stx104.c @@ -8,6 +8,7 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/gpio/regmap.h> +#include <linux/i8254.h> #include <linux/iio/iio.h> #include <linux/iio/types.h> #include <linux/isa.h> @@ -55,6 +56,7 @@ MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); #define STX104_ADC_STATUS (STX104_AIO_BASE + 0x8) #define STX104_ADC_CONTROL (STX104_AIO_BASE + 0x9) #define STX104_ADC_CONFIGURATION (STX104_AIO_BASE + 0x11) +#define STX104_I8254_BASE (STX104_AIO_BASE + 0x12) #define STX104_AIO_DATA_STRIDE 2 #define STX104_DAC_OFFSET(_channel) (STX104_DAC_BASE + STX104_AIO_DATA_STRIDE * (_channel)) @@ -77,6 +79,7 @@ MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); /* ADC Configuration */ #define STX104_GAIN GENMASK(1, 0) #define STX104_ADBU BIT(2) +#define STX104_RBK GENMASK(7, 4) #define STX104_BIPOLAR 0 #define STX104_GAIN_X1 0 #define STX104_GAIN_X2 1 @@ -168,6 +171,32 @@ static const struct regmap_config dio_regmap_config = { .io_port = true, }; +static const struct regmap_range pit_wr_ranges[] = { + regmap_reg_range(0x0, 0x3), +}; +static const struct regmap_range pit_rd_ranges[] = { + regmap_reg_range(0x0, 0x2), +}; +static const struct regmap_access_table pit_wr_table = { + .yes_ranges = pit_wr_ranges, + .n_yes_ranges = ARRAY_SIZE(pit_wr_ranges), +}; +static const struct regmap_access_table pit_rd_table = { + .yes_ranges = pit_rd_ranges, + .n_yes_ranges = ARRAY_SIZE(pit_rd_ranges), +}; + +static const struct regmap_config pit_regmap_config = { + .name = "i8254", + .reg_bits = 8, + .reg_stride = 1, + .reg_base = STX104_I8254_BASE, + .val_bits = 8, + .io_port = true, + .wr_table = &pit_wr_table, + .rd_table = &pit_rd_table, +}; + static int stx104_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { @@ -339,6 +368,21 @@ static const char *stx104_names[STX104_NGPIO] = { "DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3" }; +static int bank_select_i8254(struct regmap *map) +{ + const u8 select_i8254[] = { 0x3, 0xB, 0xA }; + size_t i; + int err; + + for (i = 0; i < ARRAY_SIZE(select_i8254); i++) { + err = regmap_write_bits(map, STX104_ADC_CONFIGURATION, STX104_RBK, select_i8254[i]); + if (err) + return err; + } + + return 0; +} + static int stx104_init_hw(struct stx104_iio *const priv) { int err; @@ -361,7 +405,7 @@ static int stx104_init_hw(struct stx104_iio *const priv) if (err) return err; - return 0; + return bank_select_i8254(priv->aio_ctl_map); } static int stx104_probe(struct device *dev, unsigned int id) @@ -369,6 +413,7 @@ static int stx104_probe(struct device *dev, unsigned int id) struct iio_dev *indio_dev; struct stx104_iio *priv; struct gpio_regmap_config gpio_config; + struct i8254_regmap_config pit_config; void __iomem *stx104_base; struct regmap *aio_ctl_map; struct regmap *aio_data_map; @@ -406,6 +451,11 @@ static int stx104_probe(struct device *dev, unsigned int id) return dev_err_probe(dev, PTR_ERR(dio_map), "Unable to initialize dio register map\n"); + pit_config.map = devm_regmap_init_mmio(dev, stx104_base, &pit_regmap_config); + if (IS_ERR(pit_config.map)) + return dev_err_probe(dev, PTR_ERR(pit_config.map), + "Unable to initialize i8254 register map\n"); + priv = iio_priv(indio_dev); priv->aio_ctl_map = aio_ctl_map; priv->aio_data_map = aio_data_map; @@ -449,7 +499,13 @@ static int stx104_probe(struct device *dev, unsigned int id) .drvdata = dio_map, }; - return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config)); + err = PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config)); + if (err) + return err; + + pit_config.parent = dev; + + return devm_i8254_regmap_register(dev, &pit_config); } static struct isa_driver stx104_driver = { @@ -464,3 +520,4 @@ module_isa_driver(stx104_driver, num_stx104); MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); MODULE_DESCRIPTION("Apex Embedded Systems STX104 IIO driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(I8254); diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c index 108f0f1685..e87d35d50a 100644 --- a/drivers/iio/amplifiers/hmc425a.c +++ b/drivers/iio/amplifiers/hmc425a.c @@ -21,6 +21,7 @@ enum hmc425a_type { ID_HMC425A, + ID_HMC540S, }; struct hmc425a_chip_info { @@ -70,6 +71,9 @@ static int hmc425a_read_raw(struct iio_dev *indio_dev, case ID_HMC425A: gain = ~code * -500; break; + case ID_HMC540S: + gain = ~code * -1000; + break; } *val = gain / 1000; @@ -106,6 +110,9 @@ static int hmc425a_write_raw(struct iio_dev *indio_dev, case ID_HMC425A: code = ~((abs(gain) / 500) & 0x3F); break; + case ID_HMC540S: + code = ~((abs(gain) / 1000) & 0xF); + break; } mutex_lock(&st->lock); @@ -157,6 +164,7 @@ static const struct iio_chan_spec hmc425a_channels[] = { /* Match table for of_platform binding */ static const struct of_device_id hmc425a_of_match[] = { { .compatible = "adi,hmc425a", .data = (void *)ID_HMC425A }, + { .compatible = "adi,hmc540s", .data = (void *)ID_HMC540S }, {}, }; MODULE_DEVICE_TABLE(of, hmc425a_of_match); @@ -171,6 +179,15 @@ static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { .gain_max = 0, .default_gain = -0x40, /* set default gain -31.5db*/ }, + [ID_HMC540S] = { + .name = "hmc540s", + .channels = hmc425a_channels, + .num_channels = ARRAY_SIZE(hmc425a_channels), + .num_gpios = 4, + .gain_min = -15000, + .gain_max = 0, + .default_gain = -0x10, /* set default gain -15.0db*/ + }, }; static int hmc425a_probe(struct platform_device *pdev) diff --git a/drivers/iio/chemical/atlas-ezo-sensor.c b/drivers/iio/chemical/atlas-ezo-sensor.c index 8fc926a2d3..761a853a4d 100644 --- a/drivers/iio/chemical/atlas-ezo-sensor.c +++ b/drivers/iio/chemical/atlas-ezo-sensor.c @@ -203,7 +203,6 @@ MODULE_DEVICE_TABLE(of, atlas_ezo_dt_ids); static int atlas_ezo_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); const struct atlas_ezo_device *chip; struct atlas_ezo_data *data; struct iio_dev *indio_dev; @@ -212,10 +211,7 @@ static int atlas_ezo_probe(struct i2c_client *client) if (!indio_dev) return -ENOMEM; - if (dev_fwnode(&client->dev)) - chip = device_get_match_data(&client->dev); - else - chip = (const struct atlas_ezo_device *)id->driver_data; + chip = i2c_get_match_data(client); if (!chip) return -EINVAL; diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c index fb15bb2160..baf93e5e3c 100644 --- a/drivers/iio/chemical/atlas-sensor.c +++ b/drivers/iio/chemical/atlas-sensor.c @@ -87,7 +87,7 @@ enum { struct atlas_data { struct i2c_client *client; struct iio_trigger *trig; - struct atlas_device *chip; + const struct atlas_device *chip; struct regmap *regmap; struct irq_work work; unsigned int interrupt_enabled; @@ -353,7 +353,7 @@ struct atlas_device { int delay; }; -static struct atlas_device atlas_devices[] = { +static const struct atlas_device atlas_devices[] = { [ATLAS_PH_SM] = { .channels = atlas_ph_channels, .num_channels = 3, @@ -589,30 +589,29 @@ static const struct iio_info atlas_info = { }; static const struct i2c_device_id atlas_id[] = { - { "atlas-ph-sm", ATLAS_PH_SM }, - { "atlas-ec-sm", ATLAS_EC_SM }, - { "atlas-orp-sm", ATLAS_ORP_SM }, - { "atlas-do-sm", ATLAS_DO_SM }, - { "atlas-rtd-sm", ATLAS_RTD_SM }, + { "atlas-ph-sm", (kernel_ulong_t)&atlas_devices[ATLAS_PH_SM] }, + { "atlas-ec-sm", (kernel_ulong_t)&atlas_devices[ATLAS_EC_SM] }, + { "atlas-orp-sm", (kernel_ulong_t)&atlas_devices[ATLAS_ORP_SM] }, + { "atlas-do-sm", (kernel_ulong_t)&atlas_devices[ATLAS_DO_SM] }, + { "atlas-rtd-sm", (kernel_ulong_t)&atlas_devices[ATLAS_RTD_SM] }, {} }; MODULE_DEVICE_TABLE(i2c, atlas_id); static const struct of_device_id atlas_dt_ids[] = { - { .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, }, - { .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, }, - { .compatible = "atlas,orp-sm", .data = (void *)ATLAS_ORP_SM, }, - { .compatible = "atlas,do-sm", .data = (void *)ATLAS_DO_SM, }, - { .compatible = "atlas,rtd-sm", .data = (void *)ATLAS_RTD_SM, }, + { .compatible = "atlas,ph-sm", .data = &atlas_devices[ATLAS_PH_SM] }, + { .compatible = "atlas,ec-sm", .data = &atlas_devices[ATLAS_EC_SM] }, + { .compatible = "atlas,orp-sm", .data = &atlas_devices[ATLAS_ORP_SM] }, + { .compatible = "atlas,do-sm", .data = &atlas_devices[ATLAS_DO_SM] }, + { .compatible = "atlas,rtd-sm", .data = &atlas_devices[ATLAS_RTD_SM] }, { } }; MODULE_DEVICE_TABLE(of, atlas_dt_ids); static int atlas_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct atlas_data *data; - struct atlas_device *chip; + const struct atlas_device *chip; struct iio_trigger *trig; struct iio_dev *indio_dev; int ret; @@ -621,10 +620,7 @@ static int atlas_probe(struct i2c_client *client) if (!indio_dev) return -ENOMEM; - if (!dev_fwnode(&client->dev)) - chip = &atlas_devices[id->driver_data]; - else - chip = &atlas_devices[(unsigned long)device_get_match_data(&client->dev)]; + chip = i2c_get_match_data(client); indio_dev->info = &atlas_info; indio_dev->name = ATLAS_DRV_NAME; diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c index b509cff9ce..21730d62b5 100644 --- a/drivers/iio/chemical/sgp30.c +++ b/drivers/iio/chemical/sgp30.c @@ -114,6 +114,7 @@ struct sgp_data { }; struct sgp_device { + unsigned long product_id; const struct iio_chan_spec *channels; int num_channels; }; @@ -182,10 +183,12 @@ static const struct iio_chan_spec sgpc3_channels[] = { static const struct sgp_device sgp_devices[] = { [SGP30] = { + .product_id = SGP30, .channels = sgp30_channels, .num_channels = ARRAY_SIZE(sgp30_channels), }, [SGPC3] = { + .product_id = SGPC3, .channels = sgpc3_channels, .num_channels = ARRAY_SIZE(sgpc3_channels), }, @@ -491,28 +494,25 @@ static const struct iio_info sgp_info = { }; static const struct of_device_id sgp_dt_ids[] = { - { .compatible = "sensirion,sgp30", .data = (void *)SGP30 }, - { .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 }, + { .compatible = "sensirion,sgp30", .data = &sgp_devices[SGP30] }, + { .compatible = "sensirion,sgpc3", .data = &sgp_devices[SGPC3] }, { } }; static int sgp_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); + const struct sgp_device *match_data; struct device *dev = &client->dev; struct iio_dev *indio_dev; struct sgp_data *data; - unsigned long product_id; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; - if (dev_fwnode(dev)) - product_id = (unsigned long)device_get_match_data(dev); - else - product_id = id->driver_data; + match_data = i2c_get_match_data(client); data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); @@ -528,15 +528,15 @@ static int sgp_probe(struct i2c_client *client) data->feature_set = be16_to_cpu(data->buffer.raw_words[0].value); - ret = sgp_check_compat(data, product_id); + ret = sgp_check_compat(data, match_data->product_id); if (ret) return ret; indio_dev->info = &sgp_info; indio_dev->name = id->name; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->channels = sgp_devices[product_id].channels; - indio_dev->num_channels = sgp_devices[product_id].num_channels; + indio_dev->channels = match_data->channels; + indio_dev->num_channels = match_data->num_channels; sgp_init(data); @@ -562,8 +562,8 @@ static void sgp_remove(struct i2c_client *client) } static const struct i2c_device_id sgp_id[] = { - { "sgp30", SGP30 }, - { "sgpc3", SGPC3 }, + { "sgp30", (kernel_ulong_t)&sgp_devices[SGP30] }, + { "sgpc3", (kernel_ulong_t)&sgp_devices[SGPC3] }, { } }; diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c index 13555f4f40..5b358bcd31 100644 --- a/drivers/iio/chemical/vz89x.c +++ b/drivers/iio/chemical/vz89x.c @@ -342,19 +342,17 @@ static const struct vz89x_chip_data vz89x_chips[] = { }; static const struct of_device_id vz89x_dt_ids[] = { - { .compatible = "sgx,vz89x", .data = (void *) VZ89X }, - { .compatible = "sgx,vz89te", .data = (void *) VZ89TE }, + { .compatible = "sgx,vz89x", .data = &vz89x_chips[VZ89X] }, + { .compatible = "sgx,vz89te", .data = &vz89x_chips[VZ89TE] }, { } }; MODULE_DEVICE_TABLE(of, vz89x_dt_ids); static int vz89x_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct device *dev = &client->dev; struct iio_dev *indio_dev; struct vz89x_data *data; - int chip_id; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) @@ -369,14 +367,10 @@ static int vz89x_probe(struct i2c_client *client) else return -EOPNOTSUPP; - if (!dev_fwnode(dev)) - chip_id = id->driver_data; - else - chip_id = (unsigned long)device_get_match_data(dev); + data->chip = i2c_get_match_data(client); i2c_set_clientdata(client, indio_dev); data->client = client; - data->chip = &vz89x_chips[chip_id]; data->last_update = jiffies - HZ; mutex_init(&data->lock); @@ -391,8 +385,8 @@ static int vz89x_probe(struct i2c_client *client) } static const struct i2c_device_id vz89x_id[] = { - { "vz89x", VZ89X }, - { "vz89te", VZ89TE }, + { "vz89x", (kernel_ulong_t)&vz89x_chips[VZ89X] }, + { "vz89te", (kernel_ulong_t)&vz89x_chips[VZ89TE] }, { } }; MODULE_DEVICE_TABLE(i2c, vz89x_id); diff --git a/drivers/iio/dac/dpot-dac.c b/drivers/iio/dac/dpot-dac.c index 83ce948925..7332064d08 100644 --- a/drivers/iio/dac/dpot-dac.c +++ b/drivers/iio/dac/dpot-dac.c @@ -226,15 +226,13 @@ disable_reg: return ret; } -static int dpot_dac_remove(struct platform_device *pdev) +static void dpot_dac_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct dpot_dac *dac = iio_priv(indio_dev); iio_device_unregister(indio_dev); regulator_disable(dac->vref); - - return 0; } static const struct of_device_id dpot_dac_match[] = { @@ -245,7 +243,7 @@ MODULE_DEVICE_TABLE(of, dpot_dac_match); static struct platform_driver dpot_dac_driver = { .probe = dpot_dac_probe, - .remove = dpot_dac_remove, + .remove_new = dpot_dac_remove, .driver = { .name = "iio-dpot-dac", .of_match_table = dpot_dac_match, diff --git a/drivers/iio/dac/lpc18xx_dac.c b/drivers/iio/dac/lpc18xx_dac.c index 60467c6f2c..b3aa4443a6 100644 --- a/drivers/iio/dac/lpc18xx_dac.c +++ b/drivers/iio/dac/lpc18xx_dac.c @@ -165,7 +165,7 @@ dis_reg: return ret; } -static int lpc18xx_dac_remove(struct platform_device *pdev) +static void lpc18xx_dac_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct lpc18xx_dac *dac = iio_priv(indio_dev); @@ -175,8 +175,6 @@ static int lpc18xx_dac_remove(struct platform_device *pdev) writel(0, dac->base + LPC18XX_DAC_CTRL); clk_disable_unprepare(dac->clk); regulator_disable(dac->vref); - - return 0; } static const struct of_device_id lpc18xx_dac_match[] = { @@ -187,7 +185,7 @@ MODULE_DEVICE_TABLE(of, lpc18xx_dac_match); static struct platform_driver lpc18xx_dac_driver = { .probe = lpc18xx_dac_probe, - .remove = lpc18xx_dac_remove, + .remove_new = lpc18xx_dac_remove, .driver = { .name = "lpc18xx-dac", .of_match_table = lpc18xx_dac_match, diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c index f4a3124d29..25bb1c0490 100644 --- a/drivers/iio/dac/mcp4725.c +++ b/drivers/iio/dac/mcp4725.c @@ -30,9 +30,14 @@ #define MCP472X_REF_VREF_UNBUFFERED 0x02 #define MCP472X_REF_VREF_BUFFERED 0x03 +struct mcp4725_chip_info { + const struct iio_chan_spec *chan_spec; + u8 dac_reg_offset; + bool use_ext_ref_voltage; +}; + struct mcp4725_data { struct i2c_client *client; - int id; unsigned ref_mode; bool vref_buffered; u16 dac_value; @@ -384,6 +389,7 @@ static int mcp4725_probe_dt(struct device *dev, static int mcp4725_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); + const struct mcp4725_chip_info *info; struct mcp4725_data *data; struct iio_dev *indio_dev; struct mcp4725_platform_data *pdata, pdata_dt; @@ -398,10 +404,7 @@ static int mcp4725_probe(struct i2c_client *client) data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; - if (dev_fwnode(&client->dev)) - data->id = (uintptr_t)device_get_match_data(&client->dev); - else - data->id = id->driver_data; + info = i2c_get_match_data(client); pdata = dev_get_platdata(&client->dev); if (!pdata) { @@ -414,7 +417,7 @@ static int mcp4725_probe(struct i2c_client *client) pdata = &pdata_dt; } - if (data->id == MCP4725 && pdata->use_vref) { + if (info->use_ext_ref_voltage && pdata->use_vref) { dev_err(&client->dev, "external reference is unavailable on MCP4725"); return -EINVAL; @@ -455,12 +458,12 @@ static int mcp4725_probe(struct i2c_client *client) indio_dev->name = id->name; indio_dev->info = &mcp4725_info; - indio_dev->channels = &mcp472x_channel[id->driver_data]; + indio_dev->channels = info->chan_spec; indio_dev->num_channels = 1; indio_dev->modes = INDIO_DIRECT_MODE; /* read current DAC value and settings */ - err = i2c_master_recv(client, inbuf, data->id == MCP4725 ? 3 : 4); + err = i2c_master_recv(client, inbuf, info->dac_reg_offset); if (err < 0) { dev_err(&client->dev, "failed to read DAC value"); @@ -470,10 +473,10 @@ static int mcp4725_probe(struct i2c_client *client) data->powerdown = pd > 0; data->powerdown_mode = pd ? pd - 1 : 2; /* largest resistor to gnd */ data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4); - if (data->id == MCP4726) + if (!info->use_ext_ref_voltage) ref = (inbuf[3] >> 3) & 0x3; - if (data->id == MCP4726 && ref != data->ref_mode) { + if (!info->use_ext_ref_voltage && ref != data->ref_mode) { dev_info(&client->dev, "voltage reference mode differs (conf: %u, eeprom: %u), setting %u", data->ref_mode, ref, data->ref_mode); @@ -510,9 +513,20 @@ static void mcp4725_remove(struct i2c_client *client) regulator_disable(data->vdd_reg); } +static const struct mcp4725_chip_info mcp4725 = { + .chan_spec = &mcp472x_channel[MCP4725], + .dac_reg_offset = 3, + .use_ext_ref_voltage = true, +}; + +static const struct mcp4725_chip_info mcp4726 = { + .chan_spec = &mcp472x_channel[MCP4726], + .dac_reg_offset = 4, +}; + static const struct i2c_device_id mcp4725_id[] = { - { "mcp4725", MCP4725 }, - { "mcp4726", MCP4726 }, + { "mcp4725", (kernel_ulong_t)&mcp4725 }, + { "mcp4726", (kernel_ulong_t)&mcp4726 }, { } }; MODULE_DEVICE_TABLE(i2c, mcp4725_id); @@ -520,11 +534,11 @@ MODULE_DEVICE_TABLE(i2c, mcp4725_id); static const struct of_device_id mcp4725_of_match[] = { { .compatible = "microchip,mcp4725", - .data = (void *)MCP4725 + .data = &mcp4725 }, { .compatible = "microchip,mcp4726", - .data = (void *)MCP4726 + .data = &mcp4726 }, { } }; diff --git a/drivers/iio/dac/stm32-dac-core.c b/drivers/iio/dac/stm32-dac-core.c index 83bf184e3a..e150ac7291 100644 --- a/drivers/iio/dac/stm32-dac-core.c +++ b/drivers/iio/dac/stm32-dac-core.c @@ -9,9 +9,12 @@ #include <linux/clk.h> #include <linux/delay.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/of_platform.h> +#include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> @@ -94,16 +97,12 @@ static int stm32_dac_probe(struct platform_device *pdev) struct reset_control *rst; int ret; - if (!dev->of_node) - return -ENODEV; - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; platform_set_drvdata(pdev, &priv->common); - cfg = (const struct stm32_dac_cfg *) - of_match_device(dev->driver->of_match_table, dev)->data; + cfg = device_get_match_data(dev); mmio = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(mmio)) @@ -183,7 +182,7 @@ err_pm_stop: return ret; } -static int stm32_dac_remove(struct platform_device *pdev) +static void stm32_dac_remove(struct platform_device *pdev) { pm_runtime_get_sync(&pdev->dev); of_platform_depopulate(&pdev->dev); @@ -191,8 +190,6 @@ static int stm32_dac_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - - return 0; } static int stm32_dac_core_resume(struct device *dev) @@ -249,7 +246,7 @@ MODULE_DEVICE_TABLE(of, stm32_dac_of_match); static struct platform_driver stm32_dac_driver = { .probe = stm32_dac_probe, - .remove = stm32_dac_remove, + .remove_new = stm32_dac_remove, .driver = { .name = "stm32-dac-core", .of_match_table = stm32_dac_of_match, diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c index 15eb440751..5a722f307e 100644 --- a/drivers/iio/dac/stm32-dac.c +++ b/drivers/iio/dac/stm32-dac.c @@ -11,12 +11,13 @@ #include <linux/delay.h> #include <linux/iio/iio.h> #include <linux/kernel.h> +#include <linux/kstrtox.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/string_helpers.h> +#include <linux/string_choices.h> #include "stm32-dac-core.h" @@ -361,7 +362,7 @@ err_pm_put: return ret; } -static int stm32_dac_remove(struct platform_device *pdev) +static void stm32_dac_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -370,8 +371,6 @@ static int stm32_dac_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - - return 0; } static int stm32_dac_suspend(struct device *dev) @@ -399,7 +398,7 @@ MODULE_DEVICE_TABLE(of, stm32_dac_of_match); static struct platform_driver stm32_dac_driver = { .probe = stm32_dac_probe, - .remove = stm32_dac_remove, + .remove_new = stm32_dac_remove, .driver = { .name = "stm32-dac", .of_match_table = stm32_dac_of_match, diff --git a/drivers/iio/dac/ti-dac5571.c b/drivers/iio/dac/ti-dac5571.c index bab11b9adc..efb1269a77 100644 --- a/drivers/iio/dac/ti-dac5571.c +++ b/drivers/iio/dac/ti-dac5571.c @@ -313,7 +313,6 @@ static int dac5571_probe(struct i2c_client *client) const struct dac5571_spec *spec; struct dac5571_data *data; struct iio_dev *indio_dev; - enum chip_id chip_id; int ret, i; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); @@ -329,12 +328,7 @@ static int dac5571_probe(struct i2c_client *client) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = dac5571_channels; - if (dev_fwnode(dev)) - chip_id = (uintptr_t)device_get_match_data(dev); - else - chip_id = id->driver_data; - - spec = &dac5571_spec[chip_id]; + spec = i2c_get_match_data(client); indio_dev->num_channels = spec->num_channels; data->spec = spec; @@ -392,31 +386,31 @@ static void dac5571_remove(struct i2c_client *i2c) } static const struct of_device_id dac5571_of_id[] = { - {.compatible = "ti,dac5571", .data = (void *)single_8bit}, - {.compatible = "ti,dac6571", .data = (void *)single_10bit}, - {.compatible = "ti,dac7571", .data = (void *)single_12bit}, - {.compatible = "ti,dac5574", .data = (void *)quad_8bit}, - {.compatible = "ti,dac6574", .data = (void *)quad_10bit}, - {.compatible = "ti,dac7574", .data = (void *)quad_12bit}, - {.compatible = "ti,dac5573", .data = (void *)quad_8bit}, - {.compatible = "ti,dac6573", .data = (void *)quad_10bit}, - {.compatible = "ti,dac7573", .data = (void *)quad_12bit}, - {.compatible = "ti,dac121c081", .data = (void *)single_12bit}, + {.compatible = "ti,dac121c081", .data = &dac5571_spec[single_12bit] }, + {.compatible = "ti,dac5571", .data = &dac5571_spec[single_8bit] }, + {.compatible = "ti,dac6571", .data = &dac5571_spec[single_10bit] }, + {.compatible = "ti,dac7571", .data = &dac5571_spec[single_12bit] }, + {.compatible = "ti,dac5574", .data = &dac5571_spec[quad_8bit] }, + {.compatible = "ti,dac6574", .data = &dac5571_spec[quad_10bit] }, + {.compatible = "ti,dac7574", .data = &dac5571_spec[quad_12bit] }, + {.compatible = "ti,dac5573", .data = &dac5571_spec[quad_8bit] }, + {.compatible = "ti,dac6573", .data = &dac5571_spec[quad_10bit] }, + {.compatible = "ti,dac7573", .data = &dac5571_spec[quad_12bit] }, {} }; MODULE_DEVICE_TABLE(of, dac5571_of_id); static const struct i2c_device_id dac5571_id[] = { - {"dac5571", single_8bit}, - {"dac6571", single_10bit}, - {"dac7571", single_12bit}, - {"dac5574", quad_8bit}, - {"dac6574", quad_10bit}, - {"dac7574", quad_12bit}, - {"dac5573", quad_8bit}, - {"dac6573", quad_10bit}, - {"dac7573", quad_12bit}, - {"dac121c081", single_12bit}, + {"dac121c081", (kernel_ulong_t)&dac5571_spec[single_12bit] }, + {"dac5571", (kernel_ulong_t)&dac5571_spec[single_8bit] }, + {"dac6571", (kernel_ulong_t)&dac5571_spec[single_10bit] }, + {"dac7571", (kernel_ulong_t)&dac5571_spec[single_12bit] }, + {"dac5574", (kernel_ulong_t)&dac5571_spec[quad_8bit] }, + {"dac6574", (kernel_ulong_t)&dac5571_spec[quad_10bit] }, + {"dac7574", (kernel_ulong_t)&dac5571_spec[quad_12bit] }, + {"dac5573", (kernel_ulong_t)&dac5571_spec[quad_8bit] }, + {"dac6573", (kernel_ulong_t)&dac5571_spec[quad_10bit] }, + {"dac7573", (kernel_ulong_t)&dac5571_spec[quad_12bit] }, {} }; MODULE_DEVICE_TABLE(i2c, dac5571_id); diff --git a/drivers/iio/dac/vf610_dac.c b/drivers/iio/dac/vf610_dac.c index fc182250c6..de73bc5a1c 100644 --- a/drivers/iio/dac/vf610_dac.c +++ b/drivers/iio/dac/vf610_dac.c @@ -231,7 +231,7 @@ error_iio_device_register: return ret; } -static int vf610_dac_remove(struct platform_device *pdev) +static void vf610_dac_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct vf610_dac *info = iio_priv(indio_dev); @@ -239,8 +239,6 @@ static int vf610_dac_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); vf610_dac_exit(info); clk_disable_unprepare(info->clk); - - return 0; } static int vf610_dac_suspend(struct device *dev) @@ -274,7 +272,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(vf610_dac_pm_ops, vf610_dac_suspend, static struct platform_driver vf610_dac_driver = { .probe = vf610_dac_probe, - .remove = vf610_dac_remove, + .remove_new = vf610_dac_remove, .driver = { .name = "vf610-dac", .of_match_table = vf610_dac_match, diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c index 698c50da1f..59a38bf945 100644 --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c @@ -359,7 +359,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_gyro_3d_remove(struct platform_device *pdev) +static void hid_gyro_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -368,8 +368,6 @@ static int hid_gyro_3d_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes); - - return 0; } static const struct platform_device_id hid_gyro_3d_ids[] = { @@ -388,7 +386,7 @@ static struct platform_driver hid_gyro_3d_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_gyro_3d_probe, - .remove = hid_gyro_3d_remove, + .remove_new = hid_gyro_3d_remove, }; module_platform_driver(hid_gyro_3d_platform_driver); diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c index fa0fe404a7..bf6d2636a8 100644 --- a/drivers/iio/humidity/hid-sensor-humidity.c +++ b/drivers/iio/humidity/hid-sensor-humidity.c @@ -260,7 +260,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_humidity_remove(struct platform_device *pdev) +static void hid_humidity_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev); struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -269,8 +269,6 @@ static int hid_humidity_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY); hid_sensor_remove_trigger(indio_dev, &humid_st->common_attributes); - - return 0; } static const struct platform_device_id hid_humidity_ids[] = { @@ -289,7 +287,7 @@ static struct platform_driver hid_humidity_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_humidity_probe, - .remove = hid_humidity_remove, + .remove_new = hid_humidity_remove, }; module_platform_driver(hid_humidity_platform_driver); diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c index ebfb79bc9e..9465908cc6 100644 --- a/drivers/iio/humidity/si7005.c +++ b/drivers/iio/humidity/si7005.c @@ -169,9 +169,16 @@ static const struct i2c_device_id si7005_id[] = { }; MODULE_DEVICE_TABLE(i2c, si7005_id); +static const struct of_device_id si7005_dt_ids[] = { + { .compatible = "silabs,si7005" }, + { } +}; +MODULE_DEVICE_TABLE(of, si7005_dt_ids); + static struct i2c_driver si7005_driver = { .driver = { .name = "si7005", + .of_match_table = si7005_dt_ids, }, .probe = si7005_probe, .id_table = si7005_id, diff --git a/drivers/iio/iio_core.h b/drivers/iio/iio_core.h index 501e286702..1a38b1915e 100644 --- a/drivers/iio/iio_core.h +++ b/drivers/iio/iio_core.h @@ -30,9 +30,6 @@ struct iio_ioctl_handler { unsigned int cmd, unsigned long arg); }; -long iio_device_ioctl(struct iio_dev *indio_dev, struct file *filp, - unsigned int cmd, unsigned long arg); - void iio_device_ioctl_handler_register(struct iio_dev *indio_dev, struct iio_ioctl_handler *h); void iio_device_ioctl_handler_unregister(struct iio_ioctl_handler *h); diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index 6c81dc5bf2..64be656f0b 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -31,6 +31,12 @@ #define ADIS16475_REG_Y_ACCEL_L 0x14 #define ADIS16475_REG_Z_ACCEL_L 0x18 #define ADIS16475_REG_TEMP_OUT 0x1c +#define ADIS16475_REG_X_DELTANG_L 0x24 +#define ADIS16475_REG_Y_DELTANG_L 0x28 +#define ADIS16475_REG_Z_DELTANG_L 0x2C +#define ADIS16475_REG_X_DELTVEL_L 0x30 +#define ADIS16475_REG_Y_DELTVEL_L 0x34 +#define ADIS16475_REG_Z_DELTVEL_L 0x38 #define ADIS16475_REG_X_GYRO_BIAS_L 0x40 #define ADIS16475_REG_Y_GYRO_BIAS_L 0x44 #define ADIS16475_REG_Z_GYRO_BIAS_L 0x48 @@ -55,6 +61,7 @@ #define ADIS16475_REG_PROD_ID 0x72 #define ADIS16475_REG_SERIAL_NUM 0x74 #define ADIS16475_REG_FLASH_CNT 0x7c +#define ADIS16500_BURST_DATA_SEL_MASK BIT(8) #define ADIS16500_BURST32_MASK BIT(9) #define ADIS16500_BURST32(x) FIELD_PREP(ADIS16500_BURST32_MASK, x) /* number of data elements in burst mode */ @@ -65,6 +72,8 @@ #define ADIS16475_BURST_MAX_SPEED 1000000 #define ADIS16475_LSB_DEC_MASK 0 #define ADIS16475_LSB_FIR_MASK 1 +#define ADIS16500_BURST_DATA_SEL_0_CHN_MASK GENMASK(5, 0) +#define ADIS16500_BURST_DATA_SEL_1_CHN_MASK GENMASK(12, 7) enum { ADIS16475_SYNC_DIRECT = 1, @@ -84,16 +93,20 @@ struct adis16475_chip_info { const struct adis16475_sync *sync; const struct adis_data adis_data; const char *name; +#define ADIS16475_HAS_BURST32 BIT(0) +#define ADIS16475_HAS_BURST_DELTA_DATA BIT(1) + const long flags; u32 num_channels; u32 gyro_max_val; u32 gyro_max_scale; u32 accel_max_val; u32 accel_max_scale; u32 temp_scale; + u32 deltang_max_val; + u32 deltvel_max_val; u32 int_clk; u16 max_dec; u8 num_sync; - bool has_burst32; }; struct adis16475 { @@ -115,6 +128,12 @@ enum { ADIS16475_SCAN_ACCEL_Y, ADIS16475_SCAN_ACCEL_Z, ADIS16475_SCAN_TEMP, + ADIS16475_SCAN_DELTANG_X, + ADIS16475_SCAN_DELTANG_Y, + ADIS16475_SCAN_DELTANG_Z, + ADIS16475_SCAN_DELTVEL_X, + ADIS16475_SCAN_DELTVEL_Y, + ADIS16475_SCAN_DELTVEL_Z, }; static bool low_rate_allow; @@ -451,6 +470,14 @@ static int adis16475_read_raw(struct iio_dev *indio_dev, case IIO_TEMP: *val = st->info->temp_scale; return IIO_VAL_INT; + case IIO_DELTA_ANGL: + *val = st->info->deltang_max_val; + *val2 = 31; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_DELTA_VELOCITY: + *val = st->info->deltvel_max_val; + *val2 = 31; + return IIO_VAL_FRACTIONAL_LOG2; default: return -EINVAL; } @@ -551,6 +578,57 @@ static int adis16475_write_raw(struct iio_dev *indio_dev, }, \ } +#define ADIS16475_MOD_CHAN_DELTA(_type, _mod, _address, _si, _r_bits, _s_bits) { \ + .type = (_type), \ + .modified = 1, \ + .channel2 = (_mod), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ + .address = (_address), \ + .scan_index = _si, \ + .scan_type = { \ + .sign = 's', \ + .realbits = (_r_bits), \ + .storagebits = (_s_bits), \ + .endianness = IIO_BE, \ + }, \ + } + +#define ADIS16475_DELTANG_CHAN(_mod) \ + ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _DELTANG_L, ADIS16475_SCAN_DELTANG_ ## _mod, 32, 32) + +#define ADIS16475_DELTVEL_CHAN(_mod) \ + ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _DELTVEL_L, ADIS16475_SCAN_DELTVEL_ ## _mod, 32, 32) + +#define ADIS16475_DELTANG_CHAN_NO_SCAN(_mod) \ + ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _DELTANG_L, -1, 32, 32) + +#define ADIS16475_DELTVEL_CHAN_NO_SCAN(_mod) \ + ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _DELTVEL_L, -1, 32, 32) + +static const struct iio_chan_spec adis16477_channels[] = { + ADIS16475_GYRO_CHANNEL(X), + ADIS16475_GYRO_CHANNEL(Y), + ADIS16475_GYRO_CHANNEL(Z), + ADIS16475_ACCEL_CHANNEL(X), + ADIS16475_ACCEL_CHANNEL(Y), + ADIS16475_ACCEL_CHANNEL(Z), + ADIS16475_TEMP_CHANNEL(), + ADIS16475_DELTANG_CHAN(X), + ADIS16475_DELTANG_CHAN(Y), + ADIS16475_DELTANG_CHAN(Z), + ADIS16475_DELTVEL_CHAN(X), + ADIS16475_DELTVEL_CHAN(Y), + ADIS16475_DELTVEL_CHAN(Z), + IIO_CHAN_SOFT_TIMESTAMP(13) +}; + static const struct iio_chan_spec adis16475_channels[] = { ADIS16475_GYRO_CHANNEL(X), ADIS16475_GYRO_CHANNEL(Y), @@ -559,6 +637,12 @@ static const struct iio_chan_spec adis16475_channels[] = { ADIS16475_ACCEL_CHANNEL(Y), ADIS16475_ACCEL_CHANNEL(Z), ADIS16475_TEMP_CHANNEL(), + ADIS16475_DELTANG_CHAN_NO_SCAN(X), + ADIS16475_DELTANG_CHAN_NO_SCAN(Y), + ADIS16475_DELTANG_CHAN_NO_SCAN(Z), + ADIS16475_DELTVEL_CHAN_NO_SCAN(X), + ADIS16475_DELTVEL_CHAN_NO_SCAN(Y), + ADIS16475_DELTVEL_CHAN_NO_SCAN(Z), IIO_CHAN_SOFT_TIMESTAMP(7) }; @@ -662,6 +746,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -677,6 +763,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -692,6 +780,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -707,6 +797,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -715,50 +807,56 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { }, [ADIS16477_1] = { .name = "adis16477-1", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, .num_sync = ARRAY_SIZE(adis16475_sync_mode), - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts), }, [ADIS16477_2] = { .name = "adis16477-2", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, .num_sync = ARRAY_SIZE(adis16475_sync_mode), - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts), }, [ADIS16477_3] = { .name = "adis16477-3", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, .num_sync = ARRAY_SIZE(adis16475_sync_mode), - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts), }, [ADIS16465_1] = { @@ -770,6 +868,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -785,6 +885,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -800,6 +902,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -815,6 +919,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -830,6 +936,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -845,6 +953,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -853,129 +963,168 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { }, [ADIS16500] = { .name = "adis16500", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), .accel_max_val = 392, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16500, &adis1650x_timeouts), }, [ADIS16505_1] = { .name = "adis16505-1", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), .accel_max_val = 78, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts), }, [ADIS16505_2] = { .name = "adis16505-2", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), .accel_max_val = 78, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts), }, [ADIS16505_3] = { .name = "adis16505-3", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), .accel_max_val = 78, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts), }, [ADIS16507_1] = { .name = "adis16507-1", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), .accel_max_val = 392, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts), }, [ADIS16507_2] = { .name = "adis16507-2", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), .accel_max_val = 392, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts), }, [ADIS16507_3] = { .name = "adis16507-3", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), .accel_max_val = 392, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts), }, }; +static int adis16475_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + u16 en; + int ret; + struct adis16475 *st = iio_priv(indio_dev); + + if (st->info->flags & ADIS16475_HAS_BURST_DELTA_DATA) { + if ((*scan_mask & ADIS16500_BURST_DATA_SEL_0_CHN_MASK) && + (*scan_mask & ADIS16500_BURST_DATA_SEL_1_CHN_MASK)) + return -EINVAL; + if (*scan_mask & ADIS16500_BURST_DATA_SEL_0_CHN_MASK) + en = FIELD_PREP(ADIS16500_BURST_DATA_SEL_MASK, 0); + else + en = FIELD_PREP(ADIS16500_BURST_DATA_SEL_MASK, 1); + + ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, + ADIS16500_BURST_DATA_SEL_MASK, en); + if (ret) + return ret; + } + + return adis_update_scan_mode(indio_dev, scan_mask); +} + static const struct iio_info adis16475_info = { .read_raw = &adis16475_read_raw, .write_raw = &adis16475_write_raw, - .update_scan_mode = adis_update_scan_mode, + .update_scan_mode = adis16475_update_scan_mode, .debugfs_reg_access = adis_debugfs_reg_access, }; @@ -998,7 +1147,7 @@ static void adis16475_burst32_check(struct adis16475 *st) int ret; struct adis *adis = &st->adis; - if (!st->info->has_burst32) + if (!(st->info->flags & ADIS16475_HAS_BURST32)) return; if (st->lsb_flag && !st->burst32) { @@ -1044,7 +1193,7 @@ static irqreturn_t adis16475_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct adis16475 *st = iio_priv(indio_dev); struct adis *adis = &st->adis; - int ret, bit, i = 0; + int ret, bit, buff_offset = 0, i = 0; __be16 *buffer; u16 crc; bool valid; @@ -1073,7 +1222,20 @@ static irqreturn_t adis16475_trigger_handler(int irq, void *p) switch (bit) { case ADIS16475_SCAN_TEMP: st->data[i++] = buffer[offset]; + /* + * The temperature channel has 16-bit storage size. + * We need to perform the padding to have the buffer + * elements naturally aligned in case there are any + * 32-bit storage size channels enabled which have a + * scan index higher than the temperature channel scan + * index. + */ + if (*indio_dev->active_scan_mask & GENMASK(ADIS16475_SCAN_DELTVEL_Z, ADIS16475_SCAN_DELTANG_X)) + st->data[i++] = 0; break; + case ADIS16475_SCAN_DELTANG_X ... ADIS16475_SCAN_DELTVEL_Z: + buff_offset = ADIS16475_SCAN_DELTANG_X; + fallthrough; case ADIS16475_SCAN_GYRO_X ... ADIS16475_SCAN_ACCEL_Z: /* * The first 2 bytes on the received data are the @@ -1081,18 +1243,18 @@ static irqreturn_t adis16475_trigger_handler(int irq, void *p) */ if (st->burst32) { /* upper 16 */ - st->data[i++] = buffer[bit * 2 + 2]; + st->data[i++] = buffer[(bit - buff_offset) * 2 + 2]; /* lower 16 */ - st->data[i++] = buffer[bit * 2 + 1]; + st->data[i++] = buffer[(bit - buff_offset) * 2 + 1]; } else { - st->data[i++] = buffer[bit + 1]; + st->data[i++] = buffer[(bit - buff_offset) + 1]; /* * Don't bother in doing the manual read if the * device supports burst32. burst32 will be * enabled in the next call to * adis16475_burst32_check()... */ - if (st->lsb_flag && !st->info->has_burst32) { + if (st->lsb_flag && !(st->info->flags & ADIS16475_HAS_BURST32)) { u16 val = 0; const u32 reg = ADIS16475_REG_X_GYRO_L + bit * 4; diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig index 83e53acfbe..c7f5866a17 100644 --- a/drivers/iio/imu/bno055/Kconfig +++ b/drivers/iio/imu/bno055/Kconfig @@ -8,6 +8,7 @@ config BOSCH_BNO055 config BOSCH_BNO055_SERIAL tristate "Bosch BNO055 attached via UART" depends on SERIAL_DEV_BUS + select REGMAP select BOSCH_BNO055 help Enable this to support Bosch BNO055 IMUs attached via UART. diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c index 7327e5723f..8a7f291190 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c @@ -71,6 +71,19 @@ int inv_mpu_aux_init(const struct inv_mpu6050_state *st) unsigned int val; int ret; + /* + * Code based on the vendor Linux kernel v3.0, + * the exact meaning is unknown. + */ + if (st->chip_type == INV_MPU9150) { + unsigned int mask = BIT(7); + + val = st->level_shifter ? mask : 0; + ret = regmap_update_bits(st->map, 0x1, mask, val); + if (ret) + return ret; + } + /* configure i2c master */ val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ | INV_MPU6050_BIT_WAIT_FOR_ES; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index a9a5fb266e..6b034dccc3 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -17,6 +17,7 @@ #include <linux/regulator/consumer.h> #include <linux/pm.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/iio/common/inv_sensors_timestamp.h> #include <linux/iio/iio.h> @@ -1495,6 +1496,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, st->irq = irq; st->map = regmap; + st->level_shifter = device_property_read_bool(dev, + "invensense,level-shifter"); pdata = dev_get_platdata(dev); if (!pdata) { result = iio_read_mount_matrix(dev, &st->orientation); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index ed5a96e78d..5950e2419e 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -203,6 +203,7 @@ struct inv_mpu6050_state { s32 magn_raw_to_gauss[3]; struct iio_mount_matrix magn_orient; unsigned int suspended_sensors; + bool level_shifter; u8 *data; }; @@ -464,7 +465,6 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type); int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable); int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, unsigned int mask); -int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val); int inv_mpu_acpi_create_mux_client(struct i2c_client *client); void inv_mpu_acpi_delete_mux_client(struct i2c_client *client); int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index d752e9c049..e6d3d07a4c 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -90,6 +90,10 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_POSITIONRELATIVE] = "positionrelative", [IIO_PHASE] = "phase", [IIO_MASSCONCENTRATION] = "massconcentration", + [IIO_DELTA_ANGL] = "deltaangl", + [IIO_DELTA_VELOCITY] = "deltavelocity", + [IIO_COLORTEMP] = "colortemp", + [IIO_CHROMATICITY] = "chromaticity", }; static const char * const iio_modifier_names[] = { @@ -1577,10 +1581,13 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev) ret = iio_device_register_sysfs_group(indio_dev, &iio_dev_opaque->chan_attr_group); if (ret) - goto error_clear_attrs; + goto error_free_chan_attrs; return 0; +error_free_chan_attrs: + kfree(iio_dev_opaque->chan_attr_group.attrs); + iio_dev_opaque->chan_attr_group.attrs = NULL; error_clear_attrs: iio_free_chan_devattr_list(&iio_dev_opaque->channel_attr_list); diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index 19f7a91157..910c1f14ab 100644 --- a/drivers/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -355,6 +355,21 @@ static ssize_t iio_ev_value_store(struct device *dev, return len; } +static ssize_t iio_ev_label_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + if (indio_dev->info->read_event_label) + return indio_dev->info->read_event_label(indio_dev, + this_attr->c, iio_ev_attr_type(this_attr), + iio_ev_attr_dir(this_attr), buf); + + return -EINVAL; +} + static int iio_device_add_event(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, unsigned int spec_index, enum iio_event_type type, enum iio_event_direction dir, @@ -411,6 +426,41 @@ static int iio_device_add_event(struct iio_dev *indio_dev, return attrcount; } +static int iio_device_add_event_label(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int spec_index, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); + char *postfix; + int ret; + + if (!indio_dev->info->read_event_label) + return 0; + + if (dir != IIO_EV_DIR_NONE) + postfix = kasprintf(GFP_KERNEL, "%s_%s_label", + iio_ev_type_text[type], + iio_ev_dir_text[dir]); + else + postfix = kasprintf(GFP_KERNEL, "%s_label", + iio_ev_type_text[type]); + if (postfix == NULL) + return -ENOMEM; + + ret = __iio_add_chan_devattr(postfix, chan, &iio_ev_label_show, NULL, + spec_index, IIO_SEPARATE, &indio_dev->dev, NULL, + &iio_dev_opaque->event_interface->dev_attr_list); + + kfree(postfix); + + if (ret < 0) + return ret; + + return 1; +} + static int iio_device_add_event_sysfs(struct iio_dev *indio_dev, struct iio_chan_spec const *chan) { @@ -448,6 +498,11 @@ static int iio_device_add_event_sysfs(struct iio_dev *indio_dev, if (ret < 0) return ret; attrcount += ret; + + ret = iio_device_add_event_label(indio_dev, chan, i, type, dir); + if (ret < 0) + return ret; + attrcount += ret; } ret = attrcount; return ret; diff --git a/drivers/iio/light/cm3605.c b/drivers/iio/light/cm3605.c index e7f0b81b7f..22a63a89f2 100644 --- a/drivers/iio/light/cm3605.c +++ b/drivers/iio/light/cm3605.c @@ -266,7 +266,7 @@ out_disable_vdd: return ret; } -static int cm3605_remove(struct platform_device *pdev) +static void cm3605_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct cm3605 *cm3605 = iio_priv(indio_dev); @@ -276,8 +276,6 @@ static int cm3605_remove(struct platform_device *pdev) gpiod_set_value_cansleep(cm3605->aset, 0); iio_device_unregister(indio_dev); regulator_disable(cm3605->vdd); - - return 0; } static int cm3605_pm_suspend(struct device *dev) @@ -320,7 +318,7 @@ static struct platform_driver cm3605_driver = { .pm = pm_sleep_ptr(&cm3605_dev_pm_ops), }, .probe = cm3605_probe, - .remove = cm3605_remove, + .remove_new = cm3605_remove, }; module_platform_driver(cm3605_driver); diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index eb1aedad7e..b6c4bef2a7 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -24,7 +24,7 @@ enum { struct als_state { struct hid_sensor_hub_callbacks callbacks; struct hid_sensor_common common_attributes; - struct hid_sensor_hub_attribute_info als_illum; + struct hid_sensor_hub_attribute_info als[CHANNEL_SCAN_INDEX_MAX]; struct { u32 illum[CHANNEL_SCAN_INDEX_MAX]; u64 timestamp __aligned(8); @@ -99,8 +99,8 @@ static int als_read_raw(struct iio_dev *indio_dev, switch (chan->scan_index) { case CHANNEL_SCAN_INDEX_INTENSITY: case CHANNEL_SCAN_INDEX_ILLUM: - report_id = als_state->als_illum.report_id; - min = als_state->als_illum.logical_minimum; + report_id = als_state->als[chan->scan_index].report_id; + min = als_state->als[chan->scan_index].logical_minimum; address = HID_USAGE_SENSOR_LIGHT_ILLUM; break; default: @@ -226,6 +226,7 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev, case HID_USAGE_SENSOR_TIME_TIMESTAMP: als_state->timestamp = hid_sensor_convert_timestamp(&als_state->common_attributes, *(s64 *)raw_data); + ret = 0; break; default: break; @@ -242,22 +243,24 @@ static int als_parse_report(struct platform_device *pdev, struct als_state *st) { int ret; + int i; + + for (i = 0; i <= CHANNEL_SCAN_INDEX_ILLUM; ++i) { + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_LIGHT_ILLUM, + &st->als[i]); + if (ret < 0) + return ret; + als_adjust_channel_bit_mask(channels, i, st->als[i].size); + + dev_dbg(&pdev->dev, "als %x:%x\n", st->als[i].index, + st->als[i].report_id); + } - ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT, - usage_id, - HID_USAGE_SENSOR_LIGHT_ILLUM, - &st->als_illum); - if (ret < 0) - return ret; - als_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_INTENSITY, - st->als_illum.size); - als_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_ILLUM, - st->als_illum.size); - - dev_dbg(&pdev->dev, "als %x:%x\n", st->als_illum.index, - st->als_illum.report_id); - - st->scale_precision = hid_sensor_format_scale(usage_id, &st->als_illum, + st->scale_precision = hid_sensor_format_scale(usage_id, + &st->als[CHANNEL_SCAN_INDEX_INTENSITY], &st->scale_pre_decml, &st->scale_post_decml); return ret; @@ -347,7 +350,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_als_remove(struct platform_device *pdev) +static void hid_als_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -356,8 +359,6 @@ static int hid_als_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &als_state->common_attributes); - - return 0; } static const struct platform_device_id hid_als_ids[] = { @@ -380,7 +381,7 @@ static struct platform_driver hid_als_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_als_probe, - .remove = hid_als_remove, + .remove_new = hid_als_remove, }; module_platform_driver(hid_als_platform_driver); diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index a47591e1ba..26c481d299 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -313,7 +313,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_prox_remove(struct platform_device *pdev) +static void hid_prox_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -322,8 +322,6 @@ static int hid_prox_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &prox_state->common_attributes); - - return 0; } static const struct platform_device_id hid_prox_ids[] = { @@ -346,7 +344,7 @@ static struct platform_driver hid_prox_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_prox_probe, - .remove = hid_prox_remove, + .remove_new = hid_prox_remove, }; module_platform_driver(hid_prox_platform_driver); diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c index 827bc25269..7800f7fa51 100644 --- a/drivers/iio/light/lm3533-als.c +++ b/drivers/iio/light/lm3533-als.c @@ -895,7 +895,7 @@ err_free_irq: return ret; } -static int lm3533_als_remove(struct platform_device *pdev) +static void lm3533_als_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct lm3533_als *als = iio_priv(indio_dev); @@ -905,8 +905,6 @@ static int lm3533_als_remove(struct platform_device *pdev) lm3533_als_disable(als); if (als->irq) free_irq(als->irq, indio_dev); - - return 0; } static struct platform_driver lm3533_als_driver = { @@ -914,7 +912,7 @@ static struct platform_driver lm3533_als_driver = { .name = "lm3533-als", }, .probe = lm3533_als_probe, - .remove = lm3533_als_remove, + .remove_new = lm3533_als_remove, }; module_platform_driver(lm3533_als_driver); diff --git a/drivers/iio/light/opt4001.c b/drivers/iio/light/opt4001.c index 502946bf9f..6cf60151b3 100644 --- a/drivers/iio/light/opt4001.c +++ b/drivers/iio/light/opt4001.c @@ -412,7 +412,7 @@ static int opt4001_probe(struct i2c_client *client) if (dev_id != OPT4001_DEVICE_ID_VAL) dev_warn(&client->dev, "Device ID: %#04x unknown\n", dev_id); - chip->chip_info = device_get_match_data(&client->dev); + chip->chip_info = i2c_get_match_data(client); indio_dev->channels = opt4001_channels; indio_dev->num_channels = ARRAY_SIZE(opt4001_channels); diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index eb706d0bf7..dd466c5fa6 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -204,7 +204,6 @@ static long ak09912_raw_to_gauss(u16 data) /* Compatible Asahi Kasei Compass parts */ enum asahi_compass_chipset { - AKXXXX = 0, AK8975, AK8963, AK09911, @@ -248,7 +247,7 @@ struct ak_def { }; static const struct ak_def ak_def_array[] = { - { + [AK8975] = { .type = AK8975, .raw_to_gauss = ak8975_raw_to_gauss, .range = 4096, @@ -273,7 +272,7 @@ static const struct ak_def ak_def_array[] = { AK8975_REG_HYL, AK8975_REG_HZL}, }, - { + [AK8963] = { .type = AK8963, .raw_to_gauss = ak8963_09911_raw_to_gauss, .range = 8190, @@ -298,7 +297,7 @@ static const struct ak_def ak_def_array[] = { AK8975_REG_HYL, AK8975_REG_HZL}, }, - { + [AK09911] = { .type = AK09911, .raw_to_gauss = ak8963_09911_raw_to_gauss, .range = 8192, @@ -323,7 +322,7 @@ static const struct ak_def ak_def_array[] = { AK09912_REG_HYL, AK09912_REG_HZL}, }, - { + [AK09912] = { .type = AK09912, .raw_to_gauss = ak09912_raw_to_gauss, .range = 32752, @@ -348,7 +347,7 @@ static const struct ak_def ak_def_array[] = { AK09912_REG_HYL, AK09912_REG_HZL}, }, - { + [AK09916] = { .type = AK09916, .raw_to_gauss = ak09912_raw_to_gauss, .range = 32752, @@ -812,18 +811,6 @@ static const struct iio_info ak8975_info = { .read_raw = &ak8975_read_raw, }; -static const struct acpi_device_id ak_acpi_match[] = { - {"AK8975", AK8975}, - {"AK8963", AK8963}, - {"INVN6500", AK8963}, - {"AK009911", AK09911}, - {"AK09911", AK09911}, - {"AKM9911", AK09911}, - {"AK09912", AK09912}, - { } -}; -MODULE_DEVICE_TABLE(acpi, ak_acpi_match); - static void ak8975_fill_buffer(struct iio_dev *indio_dev) { struct ak8975_data *data = iio_priv(indio_dev); @@ -883,10 +870,7 @@ static int ak8975_probe(struct i2c_client *client) struct iio_dev *indio_dev; struct gpio_desc *eoc_gpiod; struct gpio_desc *reset_gpiod; - const void *match; - unsigned int i; int err; - enum asahi_compass_chipset chipset; const char *name = NULL; /* @@ -928,27 +912,15 @@ static int ak8975_probe(struct i2c_client *client) return err; /* id will be NULL when enumerated via ACPI */ - match = device_get_match_data(&client->dev); - if (match) { - chipset = (uintptr_t)match; - name = dev_name(&client->dev); - } else if (id) { - chipset = (enum asahi_compass_chipset)(id->driver_data); - name = id->name; - } else - return -ENOSYS; - - for (i = 0; i < ARRAY_SIZE(ak_def_array); i++) - if (ak_def_array[i].type == chipset) - break; - - if (i == ARRAY_SIZE(ak_def_array)) { - dev_err(&client->dev, "AKM device type unsupported: %d\n", - chipset); + data->def = i2c_get_match_data(client); + if (!data->def) return -ENODEV; - } - data->def = &ak_def_array[i]; + /* If enumerated via firmware node, fix the ABI */ + if (dev_fwnode(&client->dev)) + name = dev_name(&client->dev); + else + name = id->name; /* Fetch the regulators */ data->vdd = devm_regulator_get(&client->dev, "vdd"); @@ -1076,29 +1048,40 @@ static int ak8975_runtime_resume(struct device *dev) static DEFINE_RUNTIME_DEV_PM_OPS(ak8975_dev_pm_ops, ak8975_runtime_suspend, ak8975_runtime_resume, NULL); +static const struct acpi_device_id ak_acpi_match[] = { + {"AK8963", (kernel_ulong_t)&ak_def_array[AK8963] }, + {"AK8975", (kernel_ulong_t)&ak_def_array[AK8975] }, + {"AK009911", (kernel_ulong_t)&ak_def_array[AK09911] }, + {"AK09911", (kernel_ulong_t)&ak_def_array[AK09911] }, + {"AK09912", (kernel_ulong_t)&ak_def_array[AK09912] }, + {"AKM9911", (kernel_ulong_t)&ak_def_array[AK09911] }, + {"INVN6500", (kernel_ulong_t)&ak_def_array[AK8963] }, + { } +}; +MODULE_DEVICE_TABLE(acpi, ak_acpi_match); + static const struct i2c_device_id ak8975_id[] = { - {"ak8975", AK8975}, - {"ak8963", AK8963}, - {"AK8963", AK8963}, - {"ak09911", AK09911}, - {"ak09912", AK09912}, - {"ak09916", AK09916}, + {"AK8963", (kernel_ulong_t)&ak_def_array[AK8963] }, + {"ak8963", (kernel_ulong_t)&ak_def_array[AK8963] }, + {"ak8975", (kernel_ulong_t)&ak_def_array[AK8975] }, + {"ak09911", (kernel_ulong_t)&ak_def_array[AK09911] }, + {"ak09912", (kernel_ulong_t)&ak_def_array[AK09912] }, + {"ak09916", (kernel_ulong_t)&ak_def_array[AK09916] }, {} }; - MODULE_DEVICE_TABLE(i2c, ak8975_id); static const struct of_device_id ak8975_of_match[] = { - { .compatible = "asahi-kasei,ak8975", }, - { .compatible = "ak8975", }, - { .compatible = "asahi-kasei,ak8963", }, - { .compatible = "ak8963", }, - { .compatible = "asahi-kasei,ak09911", }, - { .compatible = "ak09911", }, - { .compatible = "asahi-kasei,ak09912", }, - { .compatible = "ak09912", }, - { .compatible = "asahi-kasei,ak09916", }, - { .compatible = "ak09916", }, + { .compatible = "asahi-kasei,ak8975", .data = &ak_def_array[AK8975] }, + { .compatible = "ak8975", .data = &ak_def_array[AK8975] }, + { .compatible = "asahi-kasei,ak8963", .data = &ak_def_array[AK8963] }, + { .compatible = "ak8963", .data = &ak_def_array[AK8963] }, + { .compatible = "asahi-kasei,ak09911", .data = &ak_def_array[AK09911] }, + { .compatible = "ak09911", .data = &ak_def_array[AK09911] }, + { .compatible = "asahi-kasei,ak09912", .data = &ak_def_array[AK09912] }, + { .compatible = "ak09912", .data = &ak_def_array[AK09912] }, + { .compatible = "asahi-kasei,ak09916", .data = &ak_def_array[AK09916] }, + { .compatible = "ak09916", .data = &ak_def_array[AK09916] }, {} }; MODULE_DEVICE_TABLE(of, ak8975_of_match); diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c index e85a3a8eea..5c795a430d 100644 --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -547,7 +547,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_magn_3d_remove(struct platform_device *pdev) +static void hid_magn_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -556,8 +556,6 @@ static int hid_magn_3d_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes); - - return 0; } static const struct platform_device_id hid_magn_3d_ids[] = { @@ -576,7 +574,7 @@ static struct platform_driver hid_magn_3d_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_magn_3d_probe, - .remove = hid_magn_3d_remove, + .remove_new = hid_magn_3d_remove, }; module_platform_driver(hid_magn_3d_platform_driver); diff --git a/drivers/iio/magnetometer/rm3100-core.c b/drivers/iio/magnetometer/rm3100-core.c index 6993820445..42b70cd42b 100644 --- a/drivers/iio/magnetometer/rm3100-core.c +++ b/drivers/iio/magnetometer/rm3100-core.c @@ -530,6 +530,7 @@ int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq) struct rm3100_data *data; unsigned int tmp; int ret; + int samp_rate_index; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) @@ -586,9 +587,14 @@ int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq) ret = regmap_read(regmap, RM3100_REG_TMRC, &tmp); if (ret < 0) return ret; + + samp_rate_index = tmp - RM3100_TMRC_OFFSET; + if (samp_rate_index < 0 || samp_rate_index >= RM3100_SAMP_NUM) { + dev_err(dev, "The value read from RM3100_REG_TMRC is invalid!\n"); + return -EINVAL; + } /* Initializing max wait time, which is double conversion time. */ - data->conversion_time = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][2] - * 2; + data->conversion_time = rm3100_samp_rates[samp_rate_index][2] * 2; /* Cycle count values may not be what we want. */ if ((tmp - RM3100_TMRC_OFFSET) == 0) diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c index c5e485bfc6..7b041bb386 100644 --- a/drivers/iio/magnetometer/yamaha-yas530.c +++ b/drivers/iio/magnetometer/yamaha-yas530.c @@ -1434,9 +1434,7 @@ static int yas5xx_probe(struct i2c_client *i2c) goto assert_reset; } - ci = device_get_match_data(dev); - if (!ci) - ci = (const struct yas5xx_chip_info *)id->driver_data; + ci = i2c_get_match_data(i2c); yas5xx->chip_info = ci; ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &id_check); diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c index ba5b581d5b..8943d5c78b 100644 --- a/drivers/iio/orientation/hid-sensor-incl-3d.c +++ b/drivers/iio/orientation/hid-sensor-incl-3d.c @@ -383,7 +383,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_incl_3d_remove(struct platform_device *pdev) +static void hid_incl_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -392,8 +392,6 @@ static int hid_incl_3d_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &incl_state->common_attributes); - - return 0; } static const struct platform_device_id hid_incl_3d_ids[] = { @@ -412,7 +410,7 @@ static struct platform_driver hid_incl_3d_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_incl_3d_probe, - .remove = hid_incl_3d_remove, + .remove_new = hid_incl_3d_remove, }; module_platform_driver(hid_incl_3d_platform_driver); diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c index a033699910..5e8cadd517 100644 --- a/drivers/iio/orientation/hid-sensor-rotation.c +++ b/drivers/iio/orientation/hid-sensor-rotation.c @@ -327,7 +327,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_dev_rot_remove(struct platform_device *pdev) +static void hid_dev_rot_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -336,8 +336,6 @@ static int hid_dev_rot_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &rot_state->common_attributes); - - return 0; } static const struct platform_device_id hid_dev_rot_ids[] = { @@ -364,7 +362,7 @@ static struct platform_driver hid_dev_rot_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_dev_rot_probe, - .remove = hid_dev_rot_remove, + .remove_new = hid_dev_rot_remove, }; module_platform_driver(hid_dev_rot_platform_driver); diff --git a/drivers/iio/position/hid-sensor-custom-intel-hinge.c b/drivers/iio/position/hid-sensor-custom-intel-hinge.c index 07c30d2172..76e173850a 100644 --- a/drivers/iio/position/hid-sensor-custom-intel-hinge.c +++ b/drivers/iio/position/hid-sensor-custom-intel-hinge.c @@ -342,7 +342,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_hinge_remove(struct platform_device *pdev) +static void hid_hinge_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -351,8 +351,6 @@ static int hid_hinge_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); sensor_hub_remove_callback(hsdev, hsdev->usage); hid_sensor_remove_trigger(indio_dev, &st->common_attributes); - - return 0; } static const struct platform_device_id hid_hinge_ids[] = { @@ -371,7 +369,7 @@ static struct platform_driver hid_hinge_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_hinge_probe, - .remove = hid_hinge_remove, + .remove_new = hid_hinge_remove, }; module_platform_driver(hid_hinge_platform_driver); diff --git a/drivers/iio/potentiometer/ad5110.c b/drivers/iio/potentiometer/ad5110.c index 991e745c4f..aaf02cc7ae 100644 --- a/drivers/iio/potentiometer/ad5110.c +++ b/drivers/iio/potentiometer/ad5110.c @@ -278,14 +278,19 @@ static const struct of_device_id ad5110_of_match[] = { }; MODULE_DEVICE_TABLE(of, ad5110_of_match); +#define AD5110_ID_TABLE(_name, cfg) { \ + .name = _name, \ + .driver_data = (kernel_ulong_t)&ad5110_cfg[cfg], \ +} + static const struct i2c_device_id ad5110_id[] = { - { "ad5110-10", AD5110_10 }, - { "ad5110-80", AD5110_80 }, - { "ad5112-05", AD5112_05 }, - { "ad5112-10", AD5112_10 }, - { "ad5112-80", AD5112_80 }, - { "ad5114-10", AD5114_10 }, - { "ad5114-80", AD5114_80 }, + AD5110_ID_TABLE("ad5110-10", AD5110_10), + AD5110_ID_TABLE("ad5110-80", AD5110_80), + AD5110_ID_TABLE("ad5112-05", AD5112_05), + AD5110_ID_TABLE("ad5112-10", AD5112_10), + AD5110_ID_TABLE("ad5112-80", AD5112_80), + AD5110_ID_TABLE("ad5114-10", AD5114_10), + AD5110_ID_TABLE("ad5114-80", AD5114_80), { } }; MODULE_DEVICE_TABLE(i2c, ad5110_id); @@ -305,7 +310,7 @@ static int ad5110_probe(struct i2c_client *client) data->client = client; mutex_init(&data->lock); data->enable = 1; - data->cfg = device_get_match_data(dev); + data->cfg = i2c_get_match_data(client); /* refresh RDAC register with EEPROM */ ret = ad5110_write(data, AD5110_RESET, 0); diff --git a/drivers/iio/potentiometer/ds1803.c b/drivers/iio/potentiometer/ds1803.c index fc183e0790..e0526dd0e3 100644 --- a/drivers/iio/potentiometer/ds1803.c +++ b/drivers/iio/potentiometer/ds1803.c @@ -204,7 +204,6 @@ static const struct iio_info ds1803_info = { static int ds1803_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct device *dev = &client->dev; struct ds1803_data *data; struct iio_dev *indio_dev; @@ -217,9 +216,7 @@ static int ds1803_probe(struct i2c_client *client) data = iio_priv(indio_dev); data->client = client; - data->cfg = device_get_match_data(dev); - if (!data->cfg) - data->cfg = &ds1803_cfg[id->driver_data]; + data->cfg = i2c_get_match_data(client); indio_dev->info = &ds1803_info; indio_dev->channels = data->cfg->channels; @@ -239,10 +236,10 @@ static const struct of_device_id ds1803_dt_ids[] = { MODULE_DEVICE_TABLE(of, ds1803_dt_ids); static const struct i2c_device_id ds1803_id[] = { - { "ds1803-010", DS1803_010 }, - { "ds1803-050", DS1803_050 }, - { "ds1803-100", DS1803_100 }, - { "ds3502", DS3502 }, + { "ds1803-010", (kernel_ulong_t)&ds1803_cfg[DS1803_010] }, + { "ds1803-050", (kernel_ulong_t)&ds1803_cfg[DS1803_050] }, + { "ds1803-100", (kernel_ulong_t)&ds1803_cfg[DS1803_100] }, + { "ds3502", (kernel_ulong_t)&ds1803_cfg[DS3502] }, {} }; MODULE_DEVICE_TABLE(i2c, ds1803_id); diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 7b4c2af328..95efa32e42 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -16,6 +16,15 @@ config ABP060MG To compile this driver as a module, choose M here: the module will be called abp060mg. +config ROHM_BM1390 + tristate "ROHM BM1390GLV-Z pressure sensor driver" + depends on I2C + help + Support for the ROHM BM1390 pressure sensor. The BM1390GLV-Z + can measure pressures ranging from 300 hPa to 1300 hPa with + configurable measurement averaging and internal FIFO. The + sensor does also provide temperature measurements. + config BMP280 tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver" depends on (I2C || SPI_MASTER) diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index c90f77210e..436aec7e65 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -5,6 +5,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_ABP060MG) += abp060mg.o +obj-$(CONFIG_ROHM_BM1390) += rohm-bm1390.o obj-$(CONFIG_BMP280) += bmp280.o bmp280-objs := bmp280-core.o bmp280-regmap.o obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 1dff9bb7c4..967de99c1b 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -91,6 +91,7 @@ static const struct of_device_id bmp280_of_spi_match[] = { MODULE_DEVICE_TABLE(of, bmp280_of_spi_match); static const struct spi_device_id bmp280_spi_id[] = { + { "bmp085", (kernel_ulong_t)&bmp180_chip_info }, { "bmp180", (kernel_ulong_t)&bmp180_chip_info }, { "bmp181", (kernel_ulong_t)&bmp180_chip_info }, { "bmp280", (kernel_ulong_t)&bmp280_chip_info }, diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c index a9215eb32d..956045e2db 100644 --- a/drivers/iio/pressure/hid-sensor-press.c +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -323,7 +323,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_press_remove(struct platform_device *pdev) +static void hid_press_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -332,8 +332,6 @@ static int hid_press_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PRESSURE); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &press_state->common_attributes); - - return 0; } static const struct platform_device_id hid_press_ids[] = { @@ -352,7 +350,7 @@ static struct platform_driver hid_press_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_press_probe, - .remove = hid_press_remove, + .remove_new = hid_press_remove, }; module_platform_driver(hid_press_platform_driver); diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c index 9b3abffb72..ac30d76285 100644 --- a/drivers/iio/pressure/ms5637.c +++ b/drivers/iio/pressure/ms5637.c @@ -144,7 +144,6 @@ static const struct iio_info ms5637_info = { static int ms5637_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); const struct ms_tp_data *data; struct ms_tp_dev *dev_data; struct iio_dev *indio_dev; @@ -159,10 +158,7 @@ static int ms5637_probe(struct i2c_client *client) return -EOPNOTSUPP; } - if (id) - data = (const struct ms_tp_data *)id->driver_data; - else - data = device_get_match_data(&client->dev); + data = i2c_get_match_data(client); if (!data) return -EINVAL; diff --git a/drivers/iio/pressure/rohm-bm1390.c b/drivers/iio/pressure/rohm-bm1390.c new file mode 100644 index 0000000000..ccaa07a569 --- /dev/null +++ b/drivers/iio/pressure/rohm-bm1390.c @@ -0,0 +1,934 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * BM1390 ROHM pressure sensor + * + * Copyright (c) 2023, ROHM Semiconductor. + * https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/pressure/bm1390glv-z-e.pdf + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define BM1390_REG_MANUFACT_ID 0x0f +#define BM1390_REG_PART_ID 0x10 +#define BM1390_REG_POWER 0x12 +#define BM1390_MASK_POWER BIT(0) +#define BM1390_POWER_ON BM1390_MASK_POWER +#define BM1390_POWER_OFF 0x00 +#define BM1390_REG_RESET 0x13 +#define BM1390_MASK_RESET BIT(0) +#define BM1390_RESET_RELEASE BM1390_MASK_RESET +#define BM1390_RESET 0x00 +#define BM1390_REG_MODE_CTRL 0x14 +#define BM1390_MASK_MEAS_MODE GENMASK(1, 0) +#define BM1390_MASK_DRDY_EN BIT(4) +#define BM1390_MASK_WMI_EN BIT(2) +#define BM1390_MASK_AVE_NUM GENMASK(7, 5) + +/* + * Data-sheet states that when the IIR is used, the AVE_NUM must be set to + * value 110b + */ +#define BM1390_IIR_AVE_NUM 0x06 +#define BM1390_REG_FIFO_CTRL 0x15 +#define BM1390_MASK_IIR_MODE GENMASK(1, 0) +#define BM1390_IIR_MODE_OFF 0x0 +#define BM1390_IIR_MODE_WEAK 0x1 +#define BM1390_IIR_MODE_MID 0x2 +#define BM1390_IIR_MODE_STRONG 0x3 + +#define BM1390_MASK_FIFO_LEN BIT(6) +#define BM1390_MASK_FIFO_EN BIT(7) +#define BM1390_WMI_MIN 2 +#define BM1390_WMI_MAX 3 + +#define BM1390_REG_FIFO_LVL 0x18 +#define BM1390_MASK_FIFO_LVL GENMASK(2, 0) +#define BM1390_REG_STATUS 0x19 +#define BM1390_REG_PRESSURE_BASE 0x1a +#define BM1390_REG_TEMP_HI 0x1d +#define BM1390_REG_TEMP_LO 0x1e +#define BM1390_MAX_REGISTER BM1390_REG_TEMP_LO + +#define BM1390_ID 0x34 + +/* Regmap configs */ +static const struct regmap_range bm1390_volatile_ranges[] = { + { + .range_min = BM1390_REG_STATUS, + .range_max = BM1390_REG_STATUS, + }, + { + .range_min = BM1390_REG_FIFO_LVL, + .range_max = BM1390_REG_TEMP_LO, + }, +}; + +static const struct regmap_access_table bm1390_volatile_regs = { + .yes_ranges = &bm1390_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bm1390_volatile_ranges), +}; + +static const struct regmap_range bm1390_precious_ranges[] = { + { + .range_min = BM1390_REG_STATUS, + .range_max = BM1390_REG_STATUS, + }, +}; + +static const struct regmap_access_table bm1390_precious_regs = { + .yes_ranges = &bm1390_precious_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bm1390_precious_ranges), +}; + +static const struct regmap_range bm1390_read_only_ranges[] = { + { + .range_min = BM1390_REG_MANUFACT_ID, + .range_max = BM1390_REG_PART_ID, + }, { + .range_min = BM1390_REG_FIFO_LVL, + .range_max = BM1390_REG_TEMP_LO, + }, +}; + +static const struct regmap_access_table bm1390_ro_regs = { + .no_ranges = &bm1390_read_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(bm1390_read_only_ranges), +}; + +static const struct regmap_range bm1390_noinc_read_ranges[] = { + { + .range_min = BM1390_REG_PRESSURE_BASE, + .range_max = BM1390_REG_TEMP_LO, + }, +}; + +static const struct regmap_access_table bm1390_nir_regs = { + .yes_ranges = &bm1390_noinc_read_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bm1390_noinc_read_ranges), +}; + +static const struct regmap_config bm1390_regmap = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &bm1390_volatile_regs, + .wr_table = &bm1390_ro_regs, + .rd_noinc_table = &bm1390_nir_regs, + .precious_table = &bm1390_precious_regs, + .max_register = BM1390_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, + .disable_locking = true, +}; + +enum { + BM1390_STATE_SAMPLE, + BM1390_STATE_FIFO, +}; + +struct bm1390_data_buf { + u32 pressure; + __be16 temp; + s64 ts __aligned(8); +}; + +/* BM1390 has FIFO for 4 pressure samples */ +#define BM1390_FIFO_LENGTH 4 + +struct bm1390_data { + s64 timestamp, old_timestamp; + struct iio_trigger *trig; + struct regmap *regmap; + struct device *dev; + struct bm1390_data_buf buf; + int irq; + unsigned int state; + bool trigger_enabled; + u8 watermark; + + /* Prevent accessing sensor during FIFO read sequence */ + struct mutex mutex; +}; + +enum { + BM1390_CHAN_PRESSURE, + BM1390_CHAN_TEMP, +}; + +static const struct iio_chan_spec bm1390_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + /* + * When IIR is used, we must fix amount of averaged samples. + * Thus we don't allow setting oversampling ratio. + */ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = BM1390_CHAN_PRESSURE, + .scan_type = { + .sign = 'u', + .realbits = 22, + .storagebits = 32, + .endianness = IIO_LE, + }, + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = BM1390_CHAN_TEMP, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +/* + * We can't skip reading the pressure because the watermark IRQ is acked + * only when the pressure data is read from the FIFO. + */ +static const unsigned long bm1390_scan_masks[] = { + BIT(BM1390_CHAN_PRESSURE), + BIT(BM1390_CHAN_PRESSURE) | BIT(BM1390_CHAN_TEMP), + 0 +}; + +static int bm1390_read_temp(struct bm1390_data *data, int *temp) +{ + __be16 temp_raw; + int ret; + + ret = regmap_bulk_read(data->regmap, BM1390_REG_TEMP_HI, &temp_raw, + sizeof(temp_raw)); + if (ret) + return ret; + + *temp = be16_to_cpu(temp_raw); + + return 0; +} + +static int bm1390_pressure_read(struct bm1390_data *data, u32 *pressure) +{ + /* Pressure data is in 3 8-bit registers */ + u8 raw[3]; + int ret; + + ret = regmap_bulk_read(data->regmap, BM1390_REG_PRESSURE_BASE, + raw, sizeof(raw)); + if (ret < 0) + return ret; + + *pressure = (u32)(raw[2] >> 2 | raw[1] << 6 | raw[0] << 14); + + return 0; +} + + /* The enum values map directly to register bits */ +enum bm1390_meas_mode { + BM1390_MEAS_MODE_STOP = 0x0, + BM1390_MEAS_MODE_1SHOT = 0x1, + BM1390_MEAS_MODE_CONTINUOUS = 0x2, +}; + +static int bm1390_meas_set(struct bm1390_data *data, enum bm1390_meas_mode mode) +{ + return regmap_update_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_MEAS_MODE, mode); +} + +/* + * If the trigger is not used we just wait until the measurement has + * completed. The data-sheet says maximum measurement cycle (regardless + * the AVE_NUM) is 200 mS so let's just sleep at least that long. If speed + * is needed the trigger should be used. + */ +#define BM1390_MAX_MEAS_TIME_MS 205 + +static int bm1390_read_data(struct bm1390_data *data, + struct iio_chan_spec const *chan, int *val, int *val2) +{ + int ret, warn; + + mutex_lock(&data->mutex); + /* + * We use 'continuous mode' even for raw read because according to the + * data-sheet an one-shot mode can't be used with IIR filter. + */ + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); + if (ret) + goto unlock_out; + + switch (chan->type) { + case IIO_PRESSURE: + msleep(BM1390_MAX_MEAS_TIME_MS); + ret = bm1390_pressure_read(data, val); + break; + case IIO_TEMP: + msleep(BM1390_MAX_MEAS_TIME_MS); + ret = bm1390_read_temp(data, val); + break; + default: + ret = -EINVAL; + } + warn = bm1390_meas_set(data, BM1390_MEAS_MODE_STOP); + if (warn) + dev_warn(data->dev, "Failed to stop measurement (%d)\n", warn); +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_read_raw(struct iio_dev *idev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bm1390_data *data = iio_priv(idev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_TEMP) { + *val = 31; + *val2 = 250000; + + return IIO_VAL_INT_PLUS_MICRO; + } else if (chan->type == IIO_PRESSURE) { + /* + * pressure in hPa is register value divided by 2048. + * This means kPa is 1/20480 times the register value, + */ + *val = 1; + *val2 = 2048; + + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(idev); + if (ret) + return ret; + + ret = bm1390_read_data(data, chan, val, val2); + iio_device_release_direct_mode(idev); + if (ret) + return ret; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int __bm1390_fifo_flush(struct iio_dev *idev, unsigned int samples, + s64 timestamp) +{ + /* BM1390_FIFO_LENGTH is small so we shouldn't run out of stack */ + struct bm1390_data_buf buffer[BM1390_FIFO_LENGTH]; + struct bm1390_data *data = iio_priv(idev); + int smp_lvl, ret, i, warn, dummy; + u64 sample_period; + __be16 temp = 0; + + ret = regmap_read(data->regmap, BM1390_REG_FIFO_LVL, &smp_lvl); + if (ret) + return ret; + + smp_lvl = FIELD_GET(BM1390_MASK_FIFO_LVL, smp_lvl); + if (!smp_lvl) + return 0; + + if (smp_lvl > BM1390_FIFO_LENGTH) { + /* + * The fifo holds maximum of 4 samples so valid values + * should be 0, 1, 2, 3, 4 - rest are probably bit errors + * in I2C line. Don't overflow if this happens. + */ + dev_err(data->dev, "bad FIFO level %d\n", smp_lvl); + smp_lvl = BM1390_FIFO_LENGTH; + } + + sample_period = timestamp - data->old_timestamp; + do_div(sample_period, smp_lvl); + + if (samples && smp_lvl > samples) + smp_lvl = samples; + + + /* + * After some testing it appears that the temperature is not readable + * until the FIFO access has been done after the WMI. Thus, we need + * to read the all pressure values to memory and read the temperature + * only after that. + */ + for (i = 0; i < smp_lvl; i++) { + /* + * When we start reading data from the FIFO the sensor goes to + * special FIFO reading mode. If any other register is accessed + * during the FIFO read, samples can be dropped. Prevent access + * until FIFO_LVL is read. We have mutex locked and we do also + * go performing reading of FIFO_LVL even if this read fails. + */ + if (test_bit(BM1390_CHAN_PRESSURE, idev->active_scan_mask)) { + ret = bm1390_pressure_read(data, &buffer[i].pressure); + if (ret) + break; + } + + /* + * Old timestamp is either the previous sample IRQ time, + * previous flush-time or, if this was first sample, the enable + * time. When we add a sample period to that we should get the + * best approximation of the time-stamp we are handling. + * + * Idea is to always keep the "old_timestamp" matching the + * timestamp which we are currently handling. + */ + data->old_timestamp += sample_period; + buffer[i].ts = data->old_timestamp; + } + /* Reading the FIFO_LVL closes the FIFO access sequence */ + warn = regmap_read(data->regmap, BM1390_REG_FIFO_LVL, &dummy); + if (warn) + dev_warn(data->dev, "Closing FIFO sequence failed\n"); + + if (ret) + return ret; + + if (test_bit(BM1390_CHAN_TEMP, idev->active_scan_mask)) { + ret = regmap_bulk_read(data->regmap, BM1390_REG_TEMP_HI, &temp, + sizeof(temp)); + if (ret) + return ret; + } + + if (ret) + return ret; + + for (i = 0; i < smp_lvl; i++) { + buffer[i].temp = temp; + iio_push_to_buffers(idev, &buffer[i]); + } + + return smp_lvl; +} + +static int bm1390_fifo_flush(struct iio_dev *idev, unsigned int samples) +{ + struct bm1390_data *data = iio_priv(idev); + s64 timestamp; + int ret; + + /* + * If fifo_flush is being called from IRQ handler we know the stored + * timestamp is fairly accurate for the last stored sample. If we are + * called as a result of a read operation from userspace and hence + * before the watermark interrupt was triggered, take a timestamp + * now. We can fall anywhere in between two samples so the error in this + * case is at most one sample period. + * We need to have the IRQ disabled or we risk of messing-up + * the timestamps. If we are ran from IRQ, then the + * IRQF_ONESHOT has us covered - but if we are ran by the + * user-space read we need to disable the IRQ to be on a safe + * side. We do this usng synchronous disable so that if the + * IRQ thread is being ran on other CPU we wait for it to be + * finished. + */ + + timestamp = iio_get_time_ns(idev); + mutex_lock(&data->mutex); + ret = __bm1390_fifo_flush(idev, samples, timestamp); + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_set_watermark(struct iio_dev *idev, unsigned int val) +{ + struct bm1390_data *data = iio_priv(idev); + + if (val < BM1390_WMI_MIN || val > BM1390_WMI_MAX) + return -EINVAL; + + mutex_lock(&data->mutex); + data->watermark = val; + mutex_unlock(&data->mutex); + + return 0; +} + +static const struct iio_info bm1390_noirq_info = { + .read_raw = &bm1390_read_raw, +}; + +static const struct iio_info bm1390_info = { + .read_raw = &bm1390_read_raw, + .hwfifo_set_watermark = bm1390_set_watermark, + .hwfifo_flush_to_buffer = bm1390_fifo_flush, +}; + +static int bm1390_chip_init(struct bm1390_data *data) +{ + int ret; + + ret = regmap_write_bits(data->regmap, BM1390_REG_POWER, + BM1390_MASK_POWER, BM1390_POWER_ON); + if (ret) + return ret; + + msleep(1); + + ret = regmap_write_bits(data->regmap, BM1390_REG_RESET, + BM1390_MASK_RESET, BM1390_RESET); + if (ret) + return ret; + + msleep(1); + + ret = regmap_write_bits(data->regmap, BM1390_REG_RESET, + BM1390_MASK_RESET, BM1390_RESET_RELEASE); + if (ret) + return ret; + + msleep(1); + + ret = regmap_reinit_cache(data->regmap, &bm1390_regmap); + if (ret) { + dev_err(data->dev, "Failed to reinit reg cache\n"); + return ret; + } + + /* + * Default to use IIR filter in "middle" mode. Also the AVE_NUM must + * be fixed when IIR is in use. + */ + ret = regmap_update_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_AVE_NUM, BM1390_IIR_AVE_NUM); + if (ret) + return ret; + + return regmap_update_bits(data->regmap, BM1390_REG_FIFO_CTRL, + BM1390_MASK_IIR_MODE, BM1390_IIR_MODE_MID); +} + +static int bm1390_fifo_set_wmi(struct bm1390_data *data) +{ + u8 regval; + + regval = FIELD_PREP(BM1390_MASK_FIFO_LEN, + data->watermark - BM1390_WMI_MIN); + + return regmap_update_bits(data->regmap, BM1390_REG_FIFO_CTRL, + BM1390_MASK_FIFO_LEN, regval); +} + +static int bm1390_fifo_enable(struct iio_dev *idev) +{ + struct bm1390_data *data = iio_priv(idev); + int ret; + + /* We can't do buffered stuff without IRQ as we never get WMI */ + if (data->irq <= 0) + return -EINVAL; + + mutex_lock(&data->mutex); + if (data->trigger_enabled) { + ret = -EBUSY; + goto unlock_out; + } + + /* Update watermark to HW */ + ret = bm1390_fifo_set_wmi(data); + if (ret) + goto unlock_out; + + /* Enable WMI_IRQ */ + ret = regmap_set_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_WMI_EN); + if (ret) + goto unlock_out; + + /* Enable FIFO */ + ret = regmap_set_bits(data->regmap, BM1390_REG_FIFO_CTRL, + BM1390_MASK_FIFO_EN); + if (ret) + goto unlock_out; + + data->state = BM1390_STATE_FIFO; + + data->old_timestamp = iio_get_time_ns(idev); + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_fifo_disable(struct iio_dev *idev) +{ + struct bm1390_data *data = iio_priv(idev); + int ret; + + msleep(1); + + mutex_lock(&data->mutex); + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_STOP); + if (ret) + goto unlock_out; + + /* Disable FIFO */ + ret = regmap_clear_bits(data->regmap, BM1390_REG_FIFO_CTRL, + BM1390_MASK_FIFO_EN); + if (ret) + goto unlock_out; + + data->state = BM1390_STATE_SAMPLE; + + /* Disable WMI_IRQ */ + ret = regmap_clear_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_WMI_EN); + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_buffer_postenable(struct iio_dev *idev) +{ + /* + * If we use data-ready trigger, then the IRQ masks should be handled by + * trigger enable and the hardware buffer is not used but we just update + * results to the IIO FIFO when data-ready triggers. + */ + if (iio_device_get_current_mode(idev) == INDIO_BUFFER_TRIGGERED) + return 0; + + return bm1390_fifo_enable(idev); +} + +static int bm1390_buffer_predisable(struct iio_dev *idev) +{ + if (iio_device_get_current_mode(idev) == INDIO_BUFFER_TRIGGERED) + return 0; + + return bm1390_fifo_disable(idev); +} + +static const struct iio_buffer_setup_ops bm1390_buffer_ops = { + .postenable = bm1390_buffer_postenable, + .predisable = bm1390_buffer_predisable, +}; + +static irqreturn_t bm1390_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *idev = pf->indio_dev; + struct bm1390_data *data = iio_priv(idev); + int ret, status; + + /* DRDY is acked by reading status reg */ + ret = regmap_read(data->regmap, BM1390_REG_STATUS, &status); + if (ret || !status) + return IRQ_NONE; + + dev_dbg(data->dev, "DRDY trig status 0x%x\n", status); + + if (test_bit(BM1390_CHAN_PRESSURE, idev->active_scan_mask)) { + ret = bm1390_pressure_read(data, &data->buf.pressure); + if (ret) { + dev_warn(data->dev, "sample read failed %d\n", ret); + return IRQ_NONE; + } + } + + if (test_bit(BM1390_CHAN_TEMP, idev->active_scan_mask)) { + ret = regmap_bulk_read(data->regmap, BM1390_REG_TEMP_HI, + &data->buf.temp, sizeof(data->buf.temp)); + if (ret) { + dev_warn(data->dev, "temp read failed %d\n", ret); + return IRQ_HANDLED; + } + } + + iio_push_to_buffers_with_timestamp(idev, &data->buf, data->timestamp); + iio_trigger_notify_done(idev->trig); + + return IRQ_HANDLED; +} + +/* Get timestamps and wake the thread if we need to read data */ +static irqreturn_t bm1390_irq_handler(int irq, void *private) +{ + struct iio_dev *idev = private; + struct bm1390_data *data = iio_priv(idev); + + data->timestamp = iio_get_time_ns(idev); + + if (data->state == BM1390_STATE_FIFO || data->trigger_enabled) + return IRQ_WAKE_THREAD; + + return IRQ_NONE; +} + +static irqreturn_t bm1390_irq_thread_handler(int irq, void *private) +{ + struct iio_dev *idev = private; + struct bm1390_data *data = iio_priv(idev); + int ret = IRQ_NONE; + + mutex_lock(&data->mutex); + + if (data->trigger_enabled) { + iio_trigger_poll_nested(data->trig); + ret = IRQ_HANDLED; + } else if (data->state == BM1390_STATE_FIFO) { + int ok; + + ok = __bm1390_fifo_flush(idev, BM1390_FIFO_LENGTH, + data->timestamp); + if (ok > 0) + ret = IRQ_HANDLED; + } + + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_set_drdy_irq(struct bm1390_data *data, bool en) +{ + if (en) + return regmap_set_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_DRDY_EN); + return regmap_clear_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_DRDY_EN); +} + +static int bm1390_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct bm1390_data *data = iio_trigger_get_drvdata(trig); + int ret = 0; + + mutex_lock(&data->mutex); + + if (data->trigger_enabled == state) + goto unlock_out; + + if (data->state == BM1390_STATE_FIFO) { + dev_warn(data->dev, "Can't set trigger when FIFO enabled\n"); + ret = -EBUSY; + goto unlock_out; + } + + data->trigger_enabled = state; + + if (state) { + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); + if (ret) + goto unlock_out; + } else { + int dummy; + + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_STOP); + if (ret) + goto unlock_out; + + /* + * We need to read the status register in order to ACK the + * data-ready which may have been generated just before we + * disabled the measurement. + */ + ret = regmap_read(data->regmap, BM1390_REG_STATUS, &dummy); + if (ret) + dev_warn(data->dev, "status read failed\n"); + } + + ret = bm1390_set_drdy_irq(data, state); + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct iio_trigger_ops bm1390_trigger_ops = { + .set_trigger_state = bm1390_trigger_set_state, +}; + +static int bm1390_setup_buffer(struct bm1390_data *data, struct iio_dev *idev) +{ + int ret; + + ret = devm_iio_triggered_buffer_setup(data->dev, idev, + &iio_pollfunc_store_time, + &bm1390_trigger_handler, + &bm1390_buffer_ops); + + if (ret) + return dev_err_probe(data->dev, ret, + "iio_triggered_buffer_setup FAIL\n"); + + idev->available_scan_masks = bm1390_scan_masks; + + return 0; +} + +static int bm1390_setup_trigger(struct bm1390_data *data, struct iio_dev *idev, + int irq) +{ + struct iio_trigger *itrig; + char *name; + int ret; + + itrig = devm_iio_trigger_alloc(data->dev, "%sdata-rdy-dev%d", idev->name, + iio_device_id(idev)); + if (!itrig) + return -ENOMEM; + + data->trig = itrig; + + itrig->ops = &bm1390_trigger_ops; + iio_trigger_set_drvdata(itrig, data); + + name = devm_kasprintf(data->dev, GFP_KERNEL, "%s-bm1390", + dev_name(data->dev)); + if (name == NULL) + return -ENOMEM; + + ret = devm_request_threaded_irq(data->dev, irq, bm1390_irq_handler, + &bm1390_irq_thread_handler, + IRQF_ONESHOT, name, idev); + if (ret) + return dev_err_probe(data->dev, ret, "Could not request IRQ\n"); + + + ret = devm_iio_trigger_register(data->dev, itrig); + if (ret) + return dev_err_probe(data->dev, ret, + "Trigger registration failed\n"); + + return 0; +} + +static int bm1390_probe(struct i2c_client *i2c) +{ + struct bm1390_data *data; + struct regmap *regmap; + struct iio_dev *idev; + struct device *dev; + unsigned int part_id; + int ret; + + dev = &i2c->dev; + + regmap = devm_regmap_init_i2c(i2c, &bm1390_regmap); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize Regmap\n"); + + ret = devm_regulator_get_enable(dev, "vdd"); + if (ret) + return dev_err_probe(dev, ret, "Failed to get regulator\n"); + + ret = regmap_read(regmap, BM1390_REG_PART_ID, &part_id); + if (ret) + return dev_err_probe(dev, ret, "Failed to access sensor\n"); + + if (part_id != BM1390_ID) + dev_warn(dev, "unknown device 0x%x\n", part_id); + + idev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!idev) + return -ENOMEM; + + data = iio_priv(idev); + data->regmap = regmap; + data->dev = dev; + data->irq = i2c->irq; + /* + * For now we just allow BM1390_WMI_MIN to BM1390_WMI_MAX and + * discard every other configuration when triggered mode is not used. + */ + data->watermark = BM1390_WMI_MAX; + mutex_init(&data->mutex); + + idev->channels = bm1390_channels; + idev->num_channels = ARRAY_SIZE(bm1390_channels); + idev->name = "bm1390"; + idev->modes = INDIO_DIRECT_MODE; + + ret = bm1390_chip_init(data); + if (ret) + return dev_err_probe(dev, ret, "sensor init failed\n"); + + ret = bm1390_setup_buffer(data, idev); + if (ret) + return ret; + + /* No trigger if we don't have IRQ for data-ready and WMI */ + if (i2c->irq > 0) { + idev->info = &bm1390_info; + idev->modes |= INDIO_BUFFER_SOFTWARE; + ret = bm1390_setup_trigger(data, idev, i2c->irq); + if (ret) + return ret; + } else { + idev->info = &bm1390_noirq_info; + } + + ret = devm_iio_device_register(dev, idev); + if (ret < 0) + return dev_err_probe(dev, ret, + "Unable to register iio device\n"); + + return 0; +} + +static const struct of_device_id bm1390_of_match[] = { + { .compatible = "rohm,bm1390glv-z" }, + {} +}; +MODULE_DEVICE_TABLE(of, bm1390_of_match); + +static const struct i2c_device_id bm1390_id[] = { + { "bm1390glv-z", }, + {} +}; +MODULE_DEVICE_TABLE(i2c, bm1390_id); + +static struct i2c_driver bm1390_driver = { + .driver = { + .name = "bm1390", + .of_match_table = bm1390_of_match, + /* + * Probing explicitly requires a few millisecond of sleep. + * Enabling the VDD regulator may include ramp up rates. + */ + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .probe = bm1390_probe, + .id_table = bm1390_id, +}; +module_i2c_driver(bm1390_driver); + +MODULE_AUTHOR("Matti Vaittinen <mazziesaccount@gmail.com>"); +MODULE_DESCRIPTION("Driver for ROHM BM1390 pressure sensor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/proximity/cros_ec_mkbp_proximity.c b/drivers/iio/proximity/cros_ec_mkbp_proximity.c index 571ea18122..4df506bb8b 100644 --- a/drivers/iio/proximity/cros_ec_mkbp_proximity.c +++ b/drivers/iio/proximity/cros_ec_mkbp_proximity.c @@ -239,15 +239,13 @@ static int cros_ec_mkbp_proximity_probe(struct platform_device *pdev) return 0; } -static int cros_ec_mkbp_proximity_remove(struct platform_device *pdev) +static void cros_ec_mkbp_proximity_remove(struct platform_device *pdev) { struct cros_ec_mkbp_proximity_data *data = platform_get_drvdata(pdev); struct cros_ec_device *ec = data->ec; blocking_notifier_chain_unregister(&ec->event_notifier, &data->notifier); - - return 0; } static const struct of_device_id cros_ec_mkbp_proximity_of_match[] = { @@ -263,7 +261,7 @@ static struct platform_driver cros_ec_mkbp_proximity_driver = { .pm = pm_sleep_ptr(&cros_ec_mkbp_proximity_pm_ops), }, .probe = cros_ec_mkbp_proximity_probe, - .remove = cros_ec_mkbp_proximity_remove, + .remove_new = cros_ec_mkbp_proximity_remove, }; module_platform_driver(cros_ec_mkbp_proximity_driver); diff --git a/drivers/iio/proximity/srf04.c b/drivers/iio/proximity/srf04.c index faf2f806ce..86c57672fc 100644 --- a/drivers/iio/proximity/srf04.c +++ b/drivers/iio/proximity/srf04.c @@ -344,7 +344,7 @@ static int srf04_probe(struct platform_device *pdev) return ret; } -static int srf04_remove(struct platform_device *pdev) +static void srf04_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct srf04_data *data = iio_priv(indio_dev); @@ -355,8 +355,6 @@ static int srf04_remove(struct platform_device *pdev) pm_runtime_disable(data->dev); pm_runtime_set_suspended(data->dev); } - - return 0; } static int srf04_pm_runtime_suspend(struct device *dev) @@ -391,7 +389,7 @@ static const struct dev_pm_ops srf04_pm_ops = { static struct platform_driver srf04_driver = { .probe = srf04_probe, - .remove = srf04_remove, + .remove_new = srf04_remove, .driver = { .name = "srf04-gpio", .of_match_table = of_srf04_match, diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c index d977aacb74..0d230a0dff 100644 --- a/drivers/iio/proximity/sx9310.c +++ b/drivers/iio/proximity/sx9310.c @@ -159,6 +159,11 @@ static_assert(SX9310_NUM_CHANNELS <= SX_COMMON_MAX_NUM_CHANNELS); } #define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL) +struct sx931x_info { + const char *name; + unsigned int whoami; +}; + static const struct iio_chan_spec sx9310_channels[] = { SX9310_CHANNEL(0), /* CS0 */ SX9310_CHANNEL(1), /* CS1 */ @@ -902,7 +907,7 @@ static int sx9310_check_whoami(struct device *dev, struct iio_dev *indio_dev) { struct sx_common_data *data = iio_priv(indio_dev); - unsigned int long ddata; + const struct sx931x_info *ddata; unsigned int whoami; int ret; @@ -910,20 +915,11 @@ static int sx9310_check_whoami(struct device *dev, if (ret) return ret; - ddata = (uintptr_t)device_get_match_data(dev); - if (ddata != whoami) - return -EINVAL; - - switch (whoami) { - case SX9310_WHOAMI_VALUE: - indio_dev->name = "sx9310"; - break; - case SX9311_WHOAMI_VALUE: - indio_dev->name = "sx9311"; - break; - default: + ddata = device_get_match_data(dev); + if (ddata->whoami != whoami) return -ENODEV; - } + + indio_dev->name = ddata->name; return 0; } @@ -1015,23 +1011,33 @@ out: static DEFINE_SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume); +static const struct sx931x_info sx9310_info = { + .name = "sx9310", + .whoami = SX9310_WHOAMI_VALUE, +}; + +static const struct sx931x_info sx9311_info = { + .name = "sx9311", + .whoami = SX9311_WHOAMI_VALUE, +}; + static const struct acpi_device_id sx9310_acpi_match[] = { - { "STH9310", SX9310_WHOAMI_VALUE }, - { "STH9311", SX9311_WHOAMI_VALUE }, + { "STH9310", (kernel_ulong_t)&sx9310_info }, + { "STH9311", (kernel_ulong_t)&sx9311_info }, {} }; MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match); static const struct of_device_id sx9310_of_match[] = { - { .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE }, - { .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE }, + { .compatible = "semtech,sx9310", &sx9310_info }, + { .compatible = "semtech,sx9311", &sx9311_info }, {} }; MODULE_DEVICE_TABLE(of, sx9310_of_match); static const struct i2c_device_id sx9310_id[] = { - { "sx9310", SX9310_WHOAMI_VALUE }, - { "sx9311", SX9311_WHOAMI_VALUE }, + { "sx9310", (kernel_ulong_t)&sx9310_info }, + { "sx9311", (kernel_ulong_t)&sx9311_info }, {} }; MODULE_DEVICE_TABLE(i2c, sx9310_id); diff --git a/drivers/iio/resolver/Kconfig b/drivers/iio/resolver/Kconfig index 47dbfead9b..424529d360 100644 --- a/drivers/iio/resolver/Kconfig +++ b/drivers/iio/resolver/Kconfig @@ -25,4 +25,17 @@ config AD2S1200 To compile this driver as a module, choose M here: the module will be called ad2s1200. + +config AD2S1210 + tristate "Analog Devices ad2s1210 driver" + depends on SPI + depends on COMMON_CLK + depends on GPIOLIB || COMPILE_TEST + help + Say yes here to build support for Analog Devices spi resolver + to digital converters, ad2s1210, provides direct access via sysfs. + + To compile this driver as a module, choose M here: the + module will be called ad2s1210. + endmenu diff --git a/drivers/iio/resolver/Makefile b/drivers/iio/resolver/Makefile index fa558138ce..7f6c876c35 100644 --- a/drivers/iio/resolver/Makefile +++ b/drivers/iio/resolver/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_AD2S90) += ad2s90.o obj-$(CONFIG_AD2S1200) += ad2s1200.o +obj-$(CONFIG_AD2S1210) += ad2s1210.o diff --git a/drivers/iio/resolver/ad2s1210.c b/drivers/iio/resolver/ad2s1210.c new file mode 100644 index 0000000000..1bd1b950e7 --- /dev/null +++ b/drivers/iio/resolver/ad2s1210.c @@ -0,0 +1,1519 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ad2s1210.c support for the ADI Resolver to Digital Converters: AD2S1210 + * + * Copyright (c) 2010-2010 Analog Devices Inc. + * Copyright (c) 2023 BayLibre, SAS + * + * Device register to IIO ABI mapping: + * + * Register | Addr | IIO ABI (sysfs) + * ----------------------------|------|------------------------------------------- + * DOS Overrange Threshold | 0x89 | events/in_altvoltage0_thresh_rising_value + * DOS Mismatch Threshold | 0x8A | events/in_altvoltage0_mag_rising_value + * DOS Reset Maximum Threshold | 0x8B | events/in_altvoltage0_mag_rising_reset_max + * DOS Reset Minimum Threshold | 0x8C | events/in_altvoltage0_mag_rising_reset_min + * LOT High Threshold | 0x8D | events/in_angl1_thresh_rising_value + * LOT Low Threshold [1] | 0x8E | events/in_angl1_thresh_rising_hysteresis + * Excitation Frequency | 0x91 | out_altvoltage0_frequency + * Control | 0x92 | *as bit fields* + * Phase lock range | D5 | events/in_phase0_mag_rising_value + * Hysteresis | D4 | in_angl0_hysteresis + * Encoder resolution | D3:2 | *not implemented* + * Resolution | D1:0 | *device tree: assigned-resolution-bits* + * Soft Reset | 0xF0 | [2] + * Fault | 0xFF | *not implemented* + * + * [1]: The value written to the LOT low register is high value minus the + * hysteresis. + * [2]: Soft reset is performed when `out_altvoltage0_frequency` is written. + * + * Fault to event mapping: + * + * Fault | | Channel | Type | Direction + * ----------------------------------------|----|--------------------------------- + * Sine/cosine inputs clipped [3] | D7 | altvoltage1 | mag | either + * Sine/cosine inputs below LOS | D6 | altvoltage0 | thresh | falling + * Sine/cosine inputs exceed DOS overrange | D5 | altvoltage0 | thresh | rising + * Sine/cosine inputs exceed DOS mismatch | D4 | altvoltage0 | mag | rising + * Tracking error exceeds LOT | D3 | angl1 | thresh | rising + * Velocity exceeds maximum tracking rate | D2 | anglvel0 | mag | rising + * Phase error exceeds phase lock range | D1 | phase0 | mag | rising + * Configuration parity error | D0 | *writes to kernel log* + * + * [3]: The chip does not differentiate between fault on sine vs. cosine so + * there will also be an event on the altvoltage2 channel. + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/cleanup.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/sysfs.h> +#include <linux/types.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/events.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +/* control register flags */ +#define AD2S1210_ADDRESS_DATA BIT(7) +#define AD2S1210_PHASE_LOCK_RANGE_44 BIT(5) +#define AD2S1210_ENABLE_HYSTERESIS BIT(4) +#define AD2S1210_SET_ENRES GENMASK(3, 2) +#define AD2S1210_SET_RES GENMASK(1, 0) + +/* fault register flags */ +#define AD2S1210_FAULT_CLIP BIT(7) +#define AD2S1210_FAULT_LOS BIT(6) +#define AD2S1210_FAULT_DOS_OVR BIT(5) +#define AD2S1210_FAULT_DOS_MIS BIT(4) +#define AD2S1210_FAULT_LOT BIT(3) +#define AD2S1210_FAULT_VELOCITY BIT(2) +#define AD2S1210_FAULT_PHASE BIT(1) +#define AD2S1210_FAULT_CONFIG_PARITY BIT(0) + +#define AD2S1210_REG_POSITION_MSB 0x80 +#define AD2S1210_REG_POSITION_LSB 0x81 +#define AD2S1210_REG_VELOCITY_MSB 0x82 +#define AD2S1210_REG_VELOCITY_LSB 0x83 +#define AD2S1210_REG_LOS_THRD 0x88 +#define AD2S1210_REG_DOS_OVR_THRD 0x89 +#define AD2S1210_REG_DOS_MIS_THRD 0x8A +#define AD2S1210_REG_DOS_RST_MAX_THRD 0x8B +#define AD2S1210_REG_DOS_RST_MIN_THRD 0x8C +#define AD2S1210_REG_LOT_HIGH_THRD 0x8D +#define AD2S1210_REG_LOT_LOW_THRD 0x8E +#define AD2S1210_REG_EXCIT_FREQ 0x91 +#define AD2S1210_REG_CONTROL 0x92 +#define AD2S1210_REG_SOFT_RESET 0xF0 +#define AD2S1210_REG_FAULT 0xFF + +#define AD2S1210_MIN_CLKIN 6144000 +#define AD2S1210_MAX_CLKIN 10240000 +#define AD2S1210_MIN_EXCIT 2000 +#define AD2S1210_DEF_EXCIT 10000 +#define AD2S1210_MAX_EXCIT 20000 +#define AD2S1210_MIN_FCW 0x4 +#define AD2S1210_MAX_FCW 0x50 + +/* 44 degrees ~= 0.767945 radians */ +#define PHASE_44_DEG_TO_RAD_INT 0 +#define PHASE_44_DEG_TO_RAD_MICRO 767945 +/* 360 degrees ~= 6.283185 radians */ +#define PHASE_360_DEG_TO_RAD_INT 6 +#define PHASE_360_DEG_TO_RAD_MICRO 283185 + +/* Threshold voltage registers have 1 LSB == 38 mV */ +#define THRESHOLD_MILLIVOLT_PER_LSB 38 +/* max voltage for threshold registers is 0x7F * 38 mV */ +#define THRESHOLD_RANGE_STR "[0 38 4826]" + +#define FAULT_ONESHOT(bit, new, old) (new & bit && !(old & bit)) + +enum ad2s1210_mode { + MOD_POS = 0b00, + MOD_VEL = 0b01, + MOD_RESERVED = 0b10, + MOD_CONFIG = 0b11, +}; + +enum ad2s1210_resolution { + AD2S1210_RES_10 = 0b00, + AD2S1210_RES_12 = 0b01, + AD2S1210_RES_14 = 0b10, + AD2S1210_RES_16 = 0b11, +}; + +struct ad2s1210_state { + struct mutex lock; + struct spi_device *sdev; + /** GPIO pin connected to SAMPLE line. */ + struct gpio_desc *sample_gpio; + /** GPIO pins connected to A0 and A1 lines. */ + struct gpio_descs *mode_gpios; + /** Used to access config registers. */ + struct regmap *regmap; + /** The external oscillator frequency in Hz. */ + unsigned long clkin_hz; + /** Available raw hysteresis values based on resolution. */ + int hysteresis_available[2]; + /** The selected resolution */ + enum ad2s1210_resolution resolution; + /** Copy of fault register from the previous read. */ + u8 prev_fault_flags; + /** For reading raw sample value via SPI. */ + struct { + __be16 raw; + u8 fault; + } sample __aligned(IIO_DMA_MINALIGN); + /** Scan buffer */ + struct { + __be16 chan[2]; + /* Ensure timestamp is naturally aligned. */ + s64 timestamp __aligned(8); + } scan; + /** SPI transmit buffer. */ + u8 rx[2]; + /** SPI receive buffer. */ + u8 tx[2]; +}; + +static int ad2s1210_set_mode(struct ad2s1210_state *st, enum ad2s1210_mode mode) +{ + struct gpio_descs *gpios = st->mode_gpios; + DECLARE_BITMAP(bitmap, 2); + + bitmap[0] = mode; + + return gpiod_set_array_value(gpios->ndescs, gpios->desc, gpios->info, + bitmap); +} + +/* + * Writes the given data to the given register address. + * + * If the mode is configurable, the device will first be placed in + * configuration mode. + */ +static int ad2s1210_regmap_reg_write(void *context, unsigned int reg, + unsigned int val) +{ + struct ad2s1210_state *st = context; + struct spi_transfer xfers[] = { + { + .len = 1, + .rx_buf = &st->rx[0], + .tx_buf = &st->tx[0], + .cs_change = 1, + }, { + .len = 1, + .rx_buf = &st->rx[1], + .tx_buf = &st->tx[1], + }, + }; + int ret; + + /* values can only be 7 bits, the MSB indicates an address */ + if (val & ~0x7F) + return -EINVAL; + + st->tx[0] = reg; + st->tx[1] = val; + + ret = ad2s1210_set_mode(st, MOD_CONFIG); + if (ret < 0) + return ret; + + ret = spi_sync_transfer(st->sdev, xfers, ARRAY_SIZE(xfers)); + if (ret < 0) + return ret; + + /* soft reset also clears the fault register */ + if (reg == AD2S1210_REG_SOFT_RESET) + st->prev_fault_flags = 0; + + return 0; +} + +/* + * Reads value from one of the registers. + * + * If the mode is configurable, the device will first be placed in + * configuration mode. + */ +static int ad2s1210_regmap_reg_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct ad2s1210_state *st = context; + struct spi_transfer xfers[] = { + { + .len = 1, + .rx_buf = &st->rx[0], + .tx_buf = &st->tx[0], + .cs_change = 1, + }, { + .len = 1, + .rx_buf = &st->rx[1], + .tx_buf = &st->tx[1], + }, + }; + int ret; + + ret = ad2s1210_set_mode(st, MOD_CONFIG); + if (ret < 0) + return ret; + + st->tx[0] = reg; + /* + * Must be valid register address here otherwise this could write data. + * It doesn't matter which one as long as reading doesn't have side- + * effects. + */ + st->tx[1] = AD2S1210_REG_CONTROL; + + ret = spi_sync_transfer(st->sdev, xfers, ARRAY_SIZE(xfers)); + if (ret < 0) + return ret; + + /* reading the fault register also clears it */ + if (reg == AD2S1210_REG_FAULT) + st->prev_fault_flags = 0; + + /* + * If the D7 bit is set on any read/write register, it indicates a + * parity error. The fault register is read-only and the D7 bit means + * something else there. + */ + if (reg != AD2S1210_REG_FAULT && st->rx[1] & AD2S1210_ADDRESS_DATA) + return -EBADMSG; + + *val = st->rx[1]; + + return 0; +} + +/* + * Toggles the SAMPLE line on the AD2S1210 to latch in the current position, + * velocity, and faults. + * + * Must be called with lock held. + */ +static void ad2s1210_toggle_sample_line(struct ad2s1210_state *st) +{ + /* + * Datasheet specifies minimum hold time t16 = 2 * tck + 20 ns. So the + * longest time needed is when CLKIN is 6.144 MHz, in which case t16 + * ~= 350 ns. The same delay is also needed before re-asserting the + * SAMPLE line. + */ + gpiod_set_value(st->sample_gpio, 1); + ndelay(350); + gpiod_set_value(st->sample_gpio, 0); + ndelay(350); +} + +/* + * Sets the excitation frequency and performs software reset. + * + * Must be called with lock held. + */ +static int ad2s1210_reinit_excitation_frequency(struct ad2s1210_state *st, + u16 fexcit) +{ + /* Map resolution to settle time in milliseconds. */ + static const int track_time_ms[] = { 10, 20, 25, 60 }; + unsigned int ignored; + int ret; + u8 fcw; + + fcw = fexcit * (1 << 15) / st->clkin_hz; + if (fcw < AD2S1210_MIN_FCW || fcw > AD2S1210_MAX_FCW) + return -ERANGE; + + ret = regmap_write(st->regmap, AD2S1210_REG_EXCIT_FREQ, fcw); + if (ret < 0) + return ret; + + /* + * Software reset reinitializes the excitation frequency output. + * It does not reset any of the configuration registers. + */ + ret = regmap_write(st->regmap, AD2S1210_REG_SOFT_RESET, 0); + if (ret < 0) + return ret; + + /* + * Soft reset always triggers some faults due the change in the output + * signal so clear the faults too. We need to delay for some time + * (what datasheet calls t[track]) to allow things to settle before + * clearing the faults. + */ + msleep(track_time_ms[st->resolution] * 8192000 / st->clkin_hz); + + /* Reading the fault register clears the faults. */ + ret = regmap_read(st->regmap, AD2S1210_REG_FAULT, &ignored); + if (ret < 0) + return ret; + + /* Have to toggle sample line to get fault output pins to reset. */ + ad2s1210_toggle_sample_line(st); + + return 0; +} + +static void ad2s1210_push_events(struct iio_dev *indio_dev, + u8 flags, s64 timestamp) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + /* Sine/cosine inputs clipped */ + if (FAULT_ONESHOT(AD2S1210_FAULT_CLIP, flags, st->prev_fault_flags)) { + /* + * The chip does not differentiate between fault on sine vs. + * cosine channel so we just send an event on both channels. + */ + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 1, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_EITHER), + timestamp); + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 2, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_EITHER), + timestamp); + } + + /* Sine/cosine inputs below LOS threshold */ + if (FAULT_ONESHOT(AD2S1210_FAULT_LOS, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 0, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_FALLING), + timestamp); + + /* Sine/cosine inputs exceed DOS overrange threshold */ + if (FAULT_ONESHOT(AD2S1210_FAULT_DOS_OVR, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 0, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + timestamp); + + /* Sine/cosine inputs exceed DOS mismatch threshold */ + if (FAULT_ONESHOT(AD2S1210_FAULT_DOS_MIS, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 0, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_RISING), + timestamp); + + /* Tracking error exceeds LOT threshold */ + if (FAULT_ONESHOT(AD2S1210_FAULT_LOT, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ANGL, 1, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + timestamp); + + /* Velocity exceeds maximum tracking rate */ + if (FAULT_ONESHOT(AD2S1210_FAULT_VELOCITY, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ANGL_VEL, 0, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + timestamp); + + /* Phase error exceeds phase lock range */ + if (FAULT_ONESHOT(AD2S1210_FAULT_PHASE, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_PHASE, 0, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_RISING), + timestamp); + + /* Configuration parity error */ + if (FAULT_ONESHOT(AD2S1210_FAULT_CONFIG_PARITY, flags, + st->prev_fault_flags)) + /* + * Userspace should also get notified of this via error return + * when trying to write to any attribute that writes a register. + */ + dev_err_ratelimited(&indio_dev->dev, + "Configuration parity error\n"); + + st->prev_fault_flags = flags; +} + +static int ad2s1210_single_conversion(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + s64 timestamp; + int ret; + + guard(mutex)(&st->lock); + + ad2s1210_toggle_sample_line(st); + timestamp = iio_get_time_ns(indio_dev); + + switch (chan->type) { + case IIO_ANGL: + ret = ad2s1210_set_mode(st, MOD_POS); + break; + case IIO_ANGL_VEL: + ret = ad2s1210_set_mode(st, MOD_VEL); + break; + default: + return -EINVAL; + } + if (ret < 0) + return ret; + ret = spi_read(st->sdev, &st->sample, 3); + if (ret < 0) + return ret; + + switch (chan->type) { + case IIO_ANGL: + *val = be16_to_cpu(st->sample.raw); + ret = IIO_VAL_INT; + break; + case IIO_ANGL_VEL: + *val = (s16)be16_to_cpu(st->sample.raw); + ret = IIO_VAL_INT; + break; + default: + return -EINVAL; + } + + ad2s1210_push_events(indio_dev, st->sample.fault, timestamp); + + return ret; +} + +static int ad2s1210_get_hysteresis(struct ad2s1210_state *st, int *val) +{ + int ret; + + guard(mutex)(&st->lock); + ret = regmap_test_bits(st->regmap, AD2S1210_REG_CONTROL, + AD2S1210_ENABLE_HYSTERESIS); + if (ret < 0) + return ret; + + *val = ret << (2 * (AD2S1210_RES_16 - st->resolution)); + return IIO_VAL_INT; +} + +static int ad2s1210_set_hysteresis(struct ad2s1210_state *st, int val) +{ + guard(mutex)(&st->lock); + return regmap_update_bits(st->regmap, AD2S1210_REG_CONTROL, + AD2S1210_ENABLE_HYSTERESIS, + val ? AD2S1210_ENABLE_HYSTERESIS : 0); +} + +static int ad2s1210_get_phase_lock_range(struct ad2s1210_state *st, + int *val, int *val2) +{ + int ret; + + guard(mutex)(&st->lock); + ret = regmap_test_bits(st->regmap, AD2S1210_REG_CONTROL, + AD2S1210_PHASE_LOCK_RANGE_44); + if (ret < 0) + return ret; + + if (ret) { + /* 44 degrees as radians */ + *val = PHASE_44_DEG_TO_RAD_INT; + *val2 = PHASE_44_DEG_TO_RAD_MICRO; + } else { + /* 360 degrees as radians */ + *val = PHASE_360_DEG_TO_RAD_INT; + *val2 = PHASE_360_DEG_TO_RAD_MICRO; + } + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int ad2s1210_set_phase_lock_range(struct ad2s1210_state *st, + int val, int val2) +{ + int deg; + + /* convert radians to degrees - only two allowable values */ + if (val == PHASE_44_DEG_TO_RAD_INT && val2 == PHASE_44_DEG_TO_RAD_MICRO) + deg = 44; + else if (val == PHASE_360_DEG_TO_RAD_INT && + val2 == PHASE_360_DEG_TO_RAD_MICRO) + deg = 360; + else + return -EINVAL; + + guard(mutex)(&st->lock); + return regmap_update_bits(st->regmap, AD2S1210_REG_CONTROL, + AD2S1210_PHASE_LOCK_RANGE_44, + deg == 44 ? AD2S1210_PHASE_LOCK_RANGE_44 : 0); +} + +/* map resolution to microradians/LSB for LOT registers */ +static const int ad2s1210_lot_threshold_urad_per_lsb[] = { + 6184, /* 10-bit: ~0.35 deg/LSB, 45 deg max */ + 2473, /* 12-bit: ~0.14 deg/LSB, 18 deg max */ + 1237, /* 14-bit: ~0.07 deg/LSB, 9 deg max */ + 1237, /* 16-bit: same as 14-bit */ +}; + +static int ad2s1210_get_voltage_threshold(struct ad2s1210_state *st, + unsigned int reg, int *val) +{ + unsigned int reg_val; + int ret; + + guard(mutex)(&st->lock); + ret = regmap_read(st->regmap, reg, ®_val); + if (ret < 0) + return ret; + + *val = reg_val * THRESHOLD_MILLIVOLT_PER_LSB; + return IIO_VAL_INT; +} + +static int ad2s1210_set_voltage_threshold(struct ad2s1210_state *st, + unsigned int reg, int val) +{ + unsigned int reg_val; + + reg_val = val / THRESHOLD_MILLIVOLT_PER_LSB; + + guard(mutex)(&st->lock); + return regmap_write(st->regmap, reg, reg_val); +} + +static int ad2s1210_get_lot_high_threshold(struct ad2s1210_state *st, + int *val, int *val2) +{ + unsigned int reg_val; + int ret; + + guard(mutex)(&st->lock); + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, ®_val); + if (ret < 0) + return ret; + + *val = 0; + *val2 = reg_val * ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + return IIO_VAL_INT_PLUS_MICRO; +} + +static int ad2s1210_set_lot_high_threshold(struct ad2s1210_state *st, + int val, int val2) +{ + unsigned int high_reg_val, low_reg_val, hysteresis; + int ret; + + /* all valid values are between 0 and pi/4 radians */ + if (val != 0) + return -EINVAL; + + guard(mutex)(&st->lock); + /* + * We need to read both high and low registers first so we can preserve + * the hysteresis. + */ + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, &high_reg_val); + if (ret < 0) + return ret; + + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_LOW_THRD, &low_reg_val); + if (ret < 0) + return ret; + + hysteresis = high_reg_val - low_reg_val; + high_reg_val = val2 / ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + low_reg_val = high_reg_val - hysteresis; + + ret = regmap_write(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, high_reg_val); + if (ret < 0) + return ret; + + return regmap_write(st->regmap, AD2S1210_REG_LOT_LOW_THRD, low_reg_val); +} + +static int ad2s1210_get_lot_low_threshold(struct ad2s1210_state *st, + int *val, int *val2) +{ + unsigned int high_reg_val, low_reg_val; + int ret; + + guard(mutex)(&st->lock); + + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, &high_reg_val); + if (ret < 0) + return ret; + + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_LOW_THRD, &low_reg_val); + if (ret < 0) + return ret; + + /* sysfs value is hysteresis rather than actual low value */ + *val = 0; + *val2 = (high_reg_val - low_reg_val) * + ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + return IIO_VAL_INT_PLUS_MICRO; +} + +static int ad2s1210_set_lot_low_threshold(struct ad2s1210_state *st, + int val, int val2) +{ + unsigned int reg_val, hysteresis; + int ret; + + /* all valid values are between 0 and pi/4 radians */ + if (val != 0) + return -EINVAL; + + hysteresis = val2 / ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + + guard(mutex)(&st->lock); + + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, ®_val); + if (ret < 0) + return ret; + + return regmap_write(st->regmap, AD2S1210_REG_LOT_LOW_THRD, + reg_val - hysteresis); +} + +static int ad2s1210_get_excitation_frequency(struct ad2s1210_state *st, int *val) +{ + unsigned int reg_val; + int ret; + + guard(mutex)(&st->lock); + + ret = regmap_read(st->regmap, AD2S1210_REG_EXCIT_FREQ, ®_val); + if (ret < 0) + return ret; + + *val = reg_val * st->clkin_hz / (1 << 15); + return IIO_VAL_INT; +} + +static int ad2s1210_set_excitation_frequency(struct ad2s1210_state *st, int val) +{ + if (val < AD2S1210_MIN_EXCIT || val > AD2S1210_MAX_EXCIT) + return -EINVAL; + + guard(mutex)(&st->lock); + return ad2s1210_reinit_excitation_frequency(st, val); +} + +static const int ad2s1210_velocity_scale[] = { + 17089132, /* 8.192MHz / (2*pi * 2500 / 2^15) */ + 42722830, /* 8.192MHz / (2*pi * 1000 / 2^15) */ + 85445659, /* 8.192MHz / (2*pi * 500 / 2^15) */ + 341782638, /* 8.192MHz / (2*pi * 125 / 2^15) */ +}; + +static int ad2s1210_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return ad2s1210_single_conversion(indio_dev, chan, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL: + /* approx 0.3 arc min converted to radians */ + *val = 0; + *val2 = 95874; + return IIO_VAL_INT_PLUS_NANO; + case IIO_ANGL_VEL: + *val = st->clkin_hz; + *val2 = ad2s1210_velocity_scale[st->resolution]; + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_FREQUENCY: + switch (chan->type) { + case IIO_ALTVOLTAGE: + return ad2s1210_get_excitation_frequency(st, val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_HYSTERESIS: + switch (chan->type) { + case IIO_ANGL: + return ad2s1210_get_hysteresis(st, val); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int ad2s1210_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, + int *length, long mask) +{ + static const int excitation_frequency_available[] = { + AD2S1210_MIN_EXCIT, + 250, /* step */ + AD2S1210_MAX_EXCIT, + }; + + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_FREQUENCY: + switch (chan->type) { + case IIO_ALTVOLTAGE: + *type = IIO_VAL_INT; + *vals = excitation_frequency_available; + return IIO_AVAIL_RANGE; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_HYSTERESIS: + switch (chan->type) { + case IIO_ANGL: + *vals = st->hysteresis_available; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(st->hysteresis_available); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int ad2s1210_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_FREQUENCY: + switch (chan->type) { + case IIO_ALTVOLTAGE: + return ad2s1210_set_excitation_frequency(st, val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_HYSTERESIS: + switch (chan->type) { + case IIO_ANGL: + return ad2s1210_set_hysteresis(st, val); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static const struct iio_event_spec ad2s1210_position_event_spec[] = { + { + /* Tracking error exceeds LOT threshold fault. */ + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = + /* Loss of tracking high threshold. */ + BIT(IIO_EV_INFO_VALUE) | + /* Loss of tracking low threshold. */ + BIT(IIO_EV_INFO_HYSTERESIS), + }, +}; + +static const struct iio_event_spec ad2s1210_velocity_event_spec[] = { + { + /* Velocity exceeds maximum tracking rate fault. */ + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_RISING, + }, +}; + +static const struct iio_event_spec ad2s1210_phase_event_spec[] = { + { + /* Phase error fault. */ + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_RISING, + /* Phase lock range. */ + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, +}; + +static const struct iio_event_spec ad2s1210_monitor_signal_event_spec[] = { + { + /* Sine/cosine below LOS threshold fault. */ + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_FALLING, + /* Loss of signal threshold. */ + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, + { + /* Sine/cosine DOS overrange fault.*/ + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + /* Degredation of signal overrange threshold. */ + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, + { + /* Sine/cosine DOS mismatch fault.*/ + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, +}; + +static const struct iio_event_spec ad2s1210_sin_cos_event_spec[] = { + { + /* Sine/cosine clipping fault. */ + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_EITHER, + }, +}; + +static const struct iio_chan_spec ad2s1210_channels[] = { + { + .type = IIO_ANGL, + .indexed = 1, + .channel = 0, + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .info_mask_separate_available = + BIT(IIO_CHAN_INFO_HYSTERESIS), + }, { + .type = IIO_ANGL_VEL, + .indexed = 1, + .channel = 0, + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .event_spec = ad2s1210_velocity_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_velocity_event_spec), + }, + IIO_CHAN_SOFT_TIMESTAMP(2), + { + /* used to configure LOT thresholds and get tracking error */ + .type = IIO_ANGL, + .indexed = 1, + .channel = 1, + .scan_index = -1, + .event_spec = ad2s1210_position_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_position_event_spec), + }, + { + /* used to configure phase lock range and get phase lock error */ + .type = IIO_PHASE, + .indexed = 1, + .channel = 0, + .scan_index = -1, + .event_spec = ad2s1210_phase_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_phase_event_spec), + }, { + /* excitation frequency output */ + .type = IIO_ALTVOLTAGE, + .indexed = 1, + .channel = 0, + .output = 1, + .scan_index = -1, + .info_mask_separate = BIT(IIO_CHAN_INFO_FREQUENCY), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_FREQUENCY), + }, { + /* monitor signal */ + .type = IIO_ALTVOLTAGE, + .indexed = 1, + .channel = 0, + .scan_index = -1, + .event_spec = ad2s1210_monitor_signal_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_monitor_signal_event_spec), + }, { + /* sine input */ + .type = IIO_ALTVOLTAGE, + .indexed = 1, + .channel = 1, + .scan_index = -1, + .event_spec = ad2s1210_sin_cos_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_sin_cos_event_spec), + }, { + /* cosine input */ + .type = IIO_ALTVOLTAGE, + .indexed = 1, + .channel = 2, + .scan_index = -1, + .event_spec = ad2s1210_sin_cos_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_sin_cos_event_spec), + }, +}; + +static ssize_t event_attr_voltage_reg_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); + struct iio_dev_attr *iattr = to_iio_dev_attr(attr); + unsigned int value; + int ret; + + guard(mutex)(&st->lock); + ret = regmap_read(st->regmap, iattr->address, &value); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", value * THRESHOLD_MILLIVOLT_PER_LSB); +} + +static ssize_t event_attr_voltage_reg_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); + struct iio_dev_attr *iattr = to_iio_dev_attr(attr); + u16 data; + int ret; + + ret = kstrtou16(buf, 10, &data); + if (ret) + return -EINVAL; + + guard(mutex)(&st->lock); + ret = regmap_write(st->regmap, iattr->address, + data / THRESHOLD_MILLIVOLT_PER_LSB); + if (ret < 0) + return ret; + + return len; +} + +static ssize_t +in_angl1_thresh_rising_value_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); + int step = ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + + return sysfs_emit(buf, "[0 0.%06d 0.%06d]\n", step, step * 0x7F); +} + +static ssize_t +in_angl1_thresh_rising_hysteresis_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); + int step = ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + + return sysfs_emit(buf, "[0 0.%06d 0.%06d]\n", step, step * 0x7F); +} + +static IIO_CONST_ATTR(in_phase0_mag_rising_value_available, + __stringify(PHASE_44_DEG_TO_RAD_INT) "." + __stringify(PHASE_44_DEG_TO_RAD_MICRO) " " + __stringify(PHASE_360_DEG_TO_RAD_INT) "." + __stringify(PHASE_360_DEG_TO_RAD_MICRO)); +static IIO_CONST_ATTR(in_altvoltage0_thresh_falling_value_available, + THRESHOLD_RANGE_STR); +static IIO_CONST_ATTR(in_altvoltage0_thresh_rising_value_available, + THRESHOLD_RANGE_STR); +static IIO_CONST_ATTR(in_altvoltage0_mag_rising_value_available, + THRESHOLD_RANGE_STR); +static IIO_DEVICE_ATTR(in_altvoltage0_mag_rising_reset_max, 0644, + event_attr_voltage_reg_show, event_attr_voltage_reg_store, + AD2S1210_REG_DOS_RST_MAX_THRD); +static IIO_CONST_ATTR(in_altvoltage0_mag_rising_reset_max_available, THRESHOLD_RANGE_STR); +static IIO_DEVICE_ATTR(in_altvoltage0_mag_rising_reset_min, 0644, + event_attr_voltage_reg_show, event_attr_voltage_reg_store, + AD2S1210_REG_DOS_RST_MIN_THRD); +static IIO_CONST_ATTR(in_altvoltage0_mag_rising_reset_min_available, THRESHOLD_RANGE_STR); +static IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_value_available, 0); +static IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_hysteresis_available, 0); + +static struct attribute *ad2s1210_event_attributes[] = { + &iio_const_attr_in_phase0_mag_rising_value_available.dev_attr.attr, + &iio_const_attr_in_altvoltage0_thresh_falling_value_available.dev_attr.attr, + &iio_const_attr_in_altvoltage0_thresh_rising_value_available.dev_attr.attr, + &iio_const_attr_in_altvoltage0_mag_rising_value_available.dev_attr.attr, + &iio_dev_attr_in_altvoltage0_mag_rising_reset_max.dev_attr.attr, + &iio_const_attr_in_altvoltage0_mag_rising_reset_max_available.dev_attr.attr, + &iio_dev_attr_in_altvoltage0_mag_rising_reset_min.dev_attr.attr, + &iio_const_attr_in_altvoltage0_mag_rising_reset_min_available.dev_attr.attr, + &iio_dev_attr_in_angl1_thresh_rising_value_available.dev_attr.attr, + &iio_dev_attr_in_angl1_thresh_rising_hysteresis_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad2s1210_event_attribute_group = { + .attrs = ad2s1210_event_attributes, +}; + +static int ad2s1210_initial(struct ad2s1210_state *st) +{ + unsigned int data; + int ret; + + guard(mutex)(&st->lock); + + /* Use default config register value plus resolution from devicetree. */ + data = FIELD_PREP(AD2S1210_PHASE_LOCK_RANGE_44, 1); + data |= FIELD_PREP(AD2S1210_ENABLE_HYSTERESIS, 1); + data |= FIELD_PREP(AD2S1210_SET_ENRES, 0x3); + data |= FIELD_PREP(AD2S1210_SET_RES, st->resolution); + + ret = regmap_write(st->regmap, AD2S1210_REG_CONTROL, data); + if (ret < 0) + return ret; + + return ad2s1210_reinit_excitation_frequency(st, AD2S1210_DEF_EXCIT); +} + +static int ad2s1210_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + char *label) +{ + if (chan->type == IIO_ANGL) { + if (chan->channel == 0) + return sprintf(label, "position\n"); + if (chan->channel == 1) + return sprintf(label, "tracking error\n"); + } + if (chan->type == IIO_ANGL_VEL) + return sprintf(label, "velocity\n"); + if (chan->type == IIO_PHASE) + return sprintf(label, "synthetic reference\n"); + if (chan->type == IIO_ALTVOLTAGE) { + if (chan->output) + return sprintf(label, "excitation\n"); + if (chan->channel == 0) + return sprintf(label, "monitor signal\n"); + if (chan->channel == 1) + return sprintf(label, "cosine\n"); + if (chan->channel == 2) + return sprintf(label, "sine\n"); + } + + return -EINVAL; +} + +static int ad2s1210_read_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (chan->type) { + case IIO_ANGL: + switch (info) { + case IIO_EV_INFO_VALUE: + return ad2s1210_get_lot_high_threshold(st, val, val2); + case IIO_EV_INFO_HYSTERESIS: + return ad2s1210_get_lot_low_threshold(st, val, val2); + default: + return -EINVAL; + } + case IIO_ALTVOLTAGE: + if (chan->output) + return -EINVAL; + if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_FALLING) + return ad2s1210_get_voltage_threshold(st, + AD2S1210_REG_LOS_THRD, val); + if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING) + return ad2s1210_get_voltage_threshold(st, + AD2S1210_REG_DOS_OVR_THRD, val); + if (type == IIO_EV_TYPE_MAG) + return ad2s1210_get_voltage_threshold(st, + AD2S1210_REG_DOS_MIS_THRD, val); + return -EINVAL; + case IIO_PHASE: + return ad2s1210_get_phase_lock_range(st, val, val2); + default: + return -EINVAL; + } +} + +static int ad2s1210_write_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (chan->type) { + case IIO_ANGL: + switch (info) { + case IIO_EV_INFO_VALUE: + return ad2s1210_set_lot_high_threshold(st, val, val2); + case IIO_EV_INFO_HYSTERESIS: + return ad2s1210_set_lot_low_threshold(st, val, val2); + default: + return -EINVAL; + } + case IIO_ALTVOLTAGE: + if (chan->output) + return -EINVAL; + if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_FALLING) + return ad2s1210_set_voltage_threshold(st, + AD2S1210_REG_LOS_THRD, val); + if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING) + return ad2s1210_set_voltage_threshold(st, + AD2S1210_REG_DOS_OVR_THRD, val); + if (type == IIO_EV_TYPE_MAG) + return ad2s1210_set_voltage_threshold(st, + AD2S1210_REG_DOS_MIS_THRD, val); + return -EINVAL; + case IIO_PHASE: + return ad2s1210_set_phase_lock_range(st, val, val2); + default: + return -EINVAL; + } +} + +static int ad2s1210_read_event_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + enum iio_event_type type, + enum iio_event_direction dir, + char *label) +{ + if (chan->type == IIO_ANGL) + return sprintf(label, "LOT\n"); + if (chan->type == IIO_ANGL_VEL) + return sprintf(label, "max tracking rate\n"); + if (chan->type == IIO_PHASE) + return sprintf(label, "phase lock\n"); + if (chan->type == IIO_ALTVOLTAGE) { + if (chan->channel == 0) { + if (type == IIO_EV_TYPE_THRESH && + dir == IIO_EV_DIR_FALLING) + return sprintf(label, "LOS\n"); + if (type == IIO_EV_TYPE_THRESH && + dir == IIO_EV_DIR_RISING) + return sprintf(label, "DOS overrange\n"); + if (type == IIO_EV_TYPE_MAG) + return sprintf(label, "DOS mismatch\n"); + } + if (chan->channel == 1 || chan->channel == 2) + return sprintf(label, "clipped\n"); + } + + return -EINVAL; +} + +static int ad2s1210_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, + unsigned int *readval) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + guard(mutex)(&st->lock); + + if (readval) + return regmap_read(st->regmap, reg, readval); + + return regmap_write(st->regmap, reg, writeval); +} + +static irqreturn_t ad2s1210_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ad2s1210_state *st = iio_priv(indio_dev); + size_t chan = 0; + int ret; + + guard(mutex)(&st->lock); + + memset(&st->scan, 0, sizeof(st->scan)); + ad2s1210_toggle_sample_line(st); + + if (test_bit(0, indio_dev->active_scan_mask)) { + ret = ad2s1210_set_mode(st, MOD_POS); + if (ret < 0) + goto error_ret; + + ret = spi_read(st->sdev, &st->sample, 3); + if (ret < 0) + goto error_ret; + + memcpy(&st->scan.chan[chan++], &st->sample.raw, 2); + } + + if (test_bit(1, indio_dev->active_scan_mask)) { + ret = ad2s1210_set_mode(st, MOD_VEL); + if (ret < 0) + goto error_ret; + + ret = spi_read(st->sdev, &st->sample, 3); + if (ret < 0) + goto error_ret; + + memcpy(&st->scan.chan[chan++], &st->sample.raw, 2); + } + + ad2s1210_push_events(indio_dev, st->sample.fault, pf->timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, &st->scan, pf->timestamp); + +error_ret: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_info ad2s1210_info = { + .event_attrs = &ad2s1210_event_attribute_group, + .read_raw = ad2s1210_read_raw, + .read_avail = ad2s1210_read_avail, + .write_raw = ad2s1210_write_raw, + .read_label = ad2s1210_read_label, + .read_event_value = ad2s1210_read_event_value, + .write_event_value = ad2s1210_write_event_value, + .read_event_label = ad2s1210_read_event_label, + .debugfs_reg_access = &ad2s1210_debugfs_reg_access, +}; + +static int ad2s1210_setup_properties(struct ad2s1210_state *st) +{ + struct device *dev = &st->sdev->dev; + u32 val; + int ret; + + ret = device_property_read_u32(dev, "assigned-resolution-bits", &val); + if (ret < 0) + return dev_err_probe(dev, ret, + "failed to read assigned-resolution-bits property\n"); + + if (val < 10 || val > 16) + return dev_err_probe(dev, -EINVAL, + "resolution out of range: %u\n", val); + + st->resolution = (val - 10) >> 1; + /* + * These are values that correlate to the hysteresis bit in the Control + * register. 0 = disabled, 1 = enabled. When enabled, the actual + * hysteresis is +/- 1 LSB of the raw position value. Which bit is the + * LSB depends on the specified resolution. + */ + st->hysteresis_available[0] = 0; + st->hysteresis_available[1] = 1 << (2 * (AD2S1210_RES_16 - + st->resolution)); + + return 0; +} + +static int ad2s1210_setup_clocks(struct ad2s1210_state *st) +{ + struct device *dev = &st->sdev->dev; + struct clk *clk; + + clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n"); + + st->clkin_hz = clk_get_rate(clk); + if (st->clkin_hz < AD2S1210_MIN_CLKIN || st->clkin_hz > AD2S1210_MAX_CLKIN) + return dev_err_probe(dev, -EINVAL, + "clock frequency out of range: %lu\n", + st->clkin_hz); + + return 0; +} + +static int ad2s1210_setup_gpios(struct ad2s1210_state *st) +{ + struct device *dev = &st->sdev->dev; + struct gpio_descs *resolution_gpios; + DECLARE_BITMAP(bitmap, 2); + int ret; + + /* should not be sampling on startup */ + st->sample_gpio = devm_gpiod_get(dev, "sample", GPIOD_OUT_LOW); + if (IS_ERR(st->sample_gpio)) + return dev_err_probe(dev, PTR_ERR(st->sample_gpio), + "failed to request sample GPIO\n"); + + /* both pins high means that we start in config mode */ + st->mode_gpios = devm_gpiod_get_array(dev, "mode", GPIOD_OUT_HIGH); + if (IS_ERR(st->mode_gpios)) + return dev_err_probe(dev, PTR_ERR(st->mode_gpios), + "failed to request mode GPIOs\n"); + + if (st->mode_gpios->ndescs != 2) + return dev_err_probe(dev, -EINVAL, + "requires exactly 2 mode-gpios\n"); + + /* + * If resolution gpios are provided, they get set to the required + * resolution, otherwise it is assumed the RES0 and RES1 pins are + * hard-wired to match the resolution indicated in the devicetree. + */ + resolution_gpios = devm_gpiod_get_array_optional(dev, "resolution", + GPIOD_ASIS); + if (IS_ERR(resolution_gpios)) + return dev_err_probe(dev, PTR_ERR(resolution_gpios), + "failed to request resolution GPIOs\n"); + + if (resolution_gpios) { + if (resolution_gpios->ndescs != 2) + return dev_err_probe(dev, -EINVAL, + "requires exactly 2 resolution-gpios\n"); + + bitmap[0] = st->resolution; + + ret = gpiod_set_array_value(resolution_gpios->ndescs, + resolution_gpios->desc, + resolution_gpios->info, + bitmap); + if (ret < 0) + return dev_err_probe(dev, ret, + "failed to set resolution gpios\n"); + } + + return 0; +} + +static const struct regmap_range ad2s1210_regmap_readable_ranges[] = { + regmap_reg_range(AD2S1210_REG_POSITION_MSB, AD2S1210_REG_VELOCITY_LSB), + regmap_reg_range(AD2S1210_REG_LOS_THRD, AD2S1210_REG_LOT_LOW_THRD), + regmap_reg_range(AD2S1210_REG_EXCIT_FREQ, AD2S1210_REG_CONTROL), + regmap_reg_range(AD2S1210_REG_FAULT, AD2S1210_REG_FAULT), +}; + +static const struct regmap_access_table ad2s1210_regmap_rd_table = { + .yes_ranges = ad2s1210_regmap_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(ad2s1210_regmap_readable_ranges), +}; + +static const struct regmap_range ad2s1210_regmap_writeable_ranges[] = { + regmap_reg_range(AD2S1210_REG_LOS_THRD, AD2S1210_REG_LOT_LOW_THRD), + regmap_reg_range(AD2S1210_REG_EXCIT_FREQ, AD2S1210_REG_CONTROL), + regmap_reg_range(AD2S1210_REG_SOFT_RESET, AD2S1210_REG_SOFT_RESET), + regmap_reg_range(AD2S1210_REG_FAULT, AD2S1210_REG_FAULT), +}; + +static const struct regmap_access_table ad2s1210_regmap_wr_table = { + .yes_ranges = ad2s1210_regmap_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(ad2s1210_regmap_writeable_ranges), +}; + +static int ad2s1210_setup_regmap(struct ad2s1210_state *st) +{ + struct device *dev = &st->sdev->dev; + const struct regmap_config config = { + .reg_bits = 8, + .val_bits = 8, + .disable_locking = true, + .reg_read = ad2s1210_regmap_reg_read, + .reg_write = ad2s1210_regmap_reg_write, + .rd_table = &ad2s1210_regmap_rd_table, + .wr_table = &ad2s1210_regmap_wr_table, + .can_sleep = true, + }; + + st->regmap = devm_regmap_init(dev, NULL, st, &config); + if (IS_ERR(st->regmap)) + return dev_err_probe(dev, PTR_ERR(st->regmap), + "failed to allocate register map\n"); + + return 0; +} + +static int ad2s1210_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct ad2s1210_state *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + st = iio_priv(indio_dev); + + mutex_init(&st->lock); + st->sdev = spi; + + ret = ad2s1210_setup_properties(st); + if (ret < 0) + return ret; + + ret = ad2s1210_setup_clocks(st); + if (ret < 0) + return ret; + + ret = ad2s1210_setup_gpios(st); + if (ret < 0) + return ret; + + ret = ad2s1210_setup_regmap(st); + if (ret < 0) + return ret; + + ret = ad2s1210_initial(st); + if (ret < 0) + return ret; + + indio_dev->info = &ad2s1210_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ad2s1210_channels; + indio_dev->num_channels = ARRAY_SIZE(ad2s1210_channels); + indio_dev->name = spi_get_device_id(spi)->name; + + ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, + &iio_pollfunc_store_time, + &ad2s1210_trigger_handler, NULL); + if (ret < 0) + return dev_err_probe(&spi->dev, ret, + "iio triggered buffer setup failed\n"); + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct of_device_id ad2s1210_of_match[] = { + { .compatible = "adi,ad2s1210", }, + { } +}; +MODULE_DEVICE_TABLE(of, ad2s1210_of_match); + +static const struct spi_device_id ad2s1210_id[] = { + { "ad2s1210" }, + {} +}; +MODULE_DEVICE_TABLE(spi, ad2s1210_id); + +static struct spi_driver ad2s1210_driver = { + .driver = { + .name = "ad2s1210", + .of_match_table = ad2s1210_of_match, + }, + .probe = ad2s1210_probe, + .id_table = ad2s1210_id, +}; +module_spi_driver(ad2s1210_driver); + +MODULE_AUTHOR("Graff Yang <graff.yang@gmail.com>"); +MODULE_DESCRIPTION("Analog Devices AD2S1210 Resolver to Digital SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c index d40f235af1..0143fd4789 100644 --- a/drivers/iio/temperature/hid-sensor-temperature.c +++ b/drivers/iio/temperature/hid-sensor-temperature.c @@ -257,7 +257,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_temperature_remove(struct platform_device *pdev) +static void hid_temperature_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev); struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -265,8 +265,6 @@ static int hid_temperature_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE); hid_sensor_remove_trigger(indio_dev, &temp_st->common_attributes); - - return 0; } static const struct platform_device_id hid_temperature_ids[] = { @@ -285,7 +283,7 @@ static struct platform_driver hid_temperature_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_temperature_probe, - .remove = hid_temperature_remove, + .remove_new = hid_temperature_remove, }; module_platform_driver(hid_temperature_platform_driver); diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c index 07bb5df24a..740018d4b3 100644 --- a/drivers/iio/temperature/mlx90614.c +++ b/drivers/iio/temperature/mlx90614.c @@ -600,7 +600,7 @@ static int mlx90614_probe(struct i2c_client *client) data->client = client; mutex_init(&data->lock); data->wakeup_gpio = mlx90614_probe_wakeup(client); - data->chip_info = device_get_match_data(&client->dev); + data->chip_info = i2c_get_match_data(client); mlx90614_wakeup(data); diff --git a/drivers/iio/temperature/tmp117.c b/drivers/iio/temperature/tmp117.c index fc02f49168..059953015a 100644 --- a/drivers/iio/temperature/tmp117.c +++ b/drivers/iio/temperature/tmp117.c @@ -42,6 +42,12 @@ struct tmp117_data { s16 calibbias; }; +struct tmp11x_info { + const char *name; + struct iio_chan_spec const *channels; + int num_channels; +}; + static int tmp117_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *channel, int *val, int *val2, long mask) @@ -119,57 +125,54 @@ static const struct iio_chan_spec tmp116_channels[] = { }, }; +static const struct tmp11x_info tmp116_channels_info = { + .name = "tmp116", + .channels = tmp116_channels, + .num_channels = ARRAY_SIZE(tmp116_channels) +}; + +static const struct tmp11x_info tmp117_channels_info = { + .name = "tmp117", + .channels = tmp117_channels, + .num_channels = ARRAY_SIZE(tmp117_channels) +}; + static const struct iio_info tmp117_info = { .read_raw = tmp117_read_raw, .write_raw = tmp117_write_raw, }; -static int tmp117_identify(struct i2c_client *client) +static int tmp117_probe(struct i2c_client *client) { - const struct i2c_device_id *id; - unsigned long match_data; + const struct tmp11x_info *match_data; + struct tmp117_data *data; + struct iio_dev *indio_dev; int dev_id; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID); if (dev_id < 0) return dev_id; switch (dev_id) { case TMP116_DEVICE_ID: + match_data = &tmp116_channels_info; + break; case TMP117_DEVICE_ID: - return dev_id; + match_data = &tmp117_channels_info; + break; + default: + dev_info(&client->dev, + "Unknown device id (0x%x), use fallback compatible\n", + dev_id); + match_data = i2c_get_match_data(client); } - dev_info(&client->dev, "Unknown device id (0x%x), use fallback compatible\n", - dev_id); - - match_data = (uintptr_t)device_get_match_data(&client->dev); - if (match_data) - return match_data; - - id = i2c_client_get_device_id(client); - if (id) - return id->driver_data; - - dev_err(&client->dev, "Failed to identify unsupported device\n"); - - return -ENODEV; -} - -static int tmp117_probe(struct i2c_client *client) -{ - struct tmp117_data *data; - struct iio_dev *indio_dev; - int ret, dev_id; - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -EOPNOTSUPP; - - ret = tmp117_identify(client); - if (ret < 0) - return ret; - - dev_id = ret; + if (!match_data) + return dev_err_probe(&client->dev, -ENODEV, + "Failed to identify unsupported device\n"); indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) @@ -181,33 +184,24 @@ static int tmp117_probe(struct i2c_client *client) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &tmp117_info; + indio_dev->channels = match_data->channels; + indio_dev->num_channels = match_data->num_channels; + indio_dev->name = match_data->name; - switch (dev_id) { - case TMP116_DEVICE_ID: - indio_dev->channels = tmp116_channels; - indio_dev->num_channels = ARRAY_SIZE(tmp116_channels); - indio_dev->name = "tmp116"; - break; - case TMP117_DEVICE_ID: - indio_dev->channels = tmp117_channels; - indio_dev->num_channels = ARRAY_SIZE(tmp117_channels); - indio_dev->name = "tmp117"; - break; - } return devm_iio_device_register(&client->dev, indio_dev); } static const struct of_device_id tmp117_of_match[] = { - { .compatible = "ti,tmp116", .data = (void *)TMP116_DEVICE_ID }, - { .compatible = "ti,tmp117", .data = (void *)TMP117_DEVICE_ID }, + { .compatible = "ti,tmp116", .data = &tmp116_channels_info }, + { .compatible = "ti,tmp117", .data = &tmp117_channels_info }, { } }; MODULE_DEVICE_TABLE(of, tmp117_of_match); static const struct i2c_device_id tmp117_id[] = { - { "tmp116", TMP116_DEVICE_ID }, - { "tmp117", TMP117_DEVICE_ID }, + { "tmp116", (kernel_ulong_t)&tmp116_channels_info }, + { "tmp117", (kernel_ulong_t)&tmp117_channels_info }, { } }; MODULE_DEVICE_TABLE(i2c, tmp117_id); diff --git a/drivers/iio/trigger/iio-trig-interrupt.c b/drivers/iio/trigger/iio-trig-interrupt.c index 5f49cd105f..dec256bfbd 100644 --- a/drivers/iio/trigger/iio-trig-interrupt.c +++ b/drivers/iio/trigger/iio-trig-interrupt.c @@ -81,7 +81,7 @@ error_ret: return ret; } -static int iio_interrupt_trigger_remove(struct platform_device *pdev) +static void iio_interrupt_trigger_remove(struct platform_device *pdev) { struct iio_trigger *trig; struct iio_interrupt_trigger_info *trig_info; @@ -92,13 +92,11 @@ static int iio_interrupt_trigger_remove(struct platform_device *pdev) free_irq(trig_info->irq, trig); kfree(trig_info); iio_trigger_free(trig); - - return 0; } static struct platform_driver iio_interrupt_trigger_driver = { .probe = iio_interrupt_trigger_probe, - .remove = iio_interrupt_trigger_remove, + .remove_new = iio_interrupt_trigger_remove, .driver = { .name = "iio_interrupt_trigger", }, diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c index 3643c4afae..d76444030a 100644 --- a/drivers/iio/trigger/stm32-timer-trigger.c +++ b/drivers/iio/trigger/stm32-timer-trigger.c @@ -809,7 +809,7 @@ static int stm32_timer_trigger_probe(struct platform_device *pdev) return 0; } -static int stm32_timer_trigger_remove(struct platform_device *pdev) +static void stm32_timer_trigger_remove(struct platform_device *pdev) { struct stm32_timer_trigger *priv = platform_get_drvdata(pdev); u32 val; @@ -824,8 +824,6 @@ static int stm32_timer_trigger_remove(struct platform_device *pdev) if (priv->enabled) clk_disable(priv->clk); - - return 0; } static int stm32_timer_trigger_suspend(struct device *dev) @@ -904,7 +902,7 @@ MODULE_DEVICE_TABLE(of, stm32_trig_of_match); static struct platform_driver stm32_timer_trigger_driver = { .probe = stm32_timer_trigger_probe, - .remove = stm32_timer_trigger_remove, + .remove_new = stm32_timer_trigger_remove, .driver = { .name = "stm32-timer-trigger", .of_match_table = stm32_trig_of_match, |