diff options
Diffstat (limited to 'drivers/input/joystick/stinger.c')
| -rw-r--r-- | drivers/input/joystick/stinger.c | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c new file mode 100644 index 0000000000..530de468cb --- /dev/null +++ b/drivers/input/joystick/stinger.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2000-2001 Vojtech Pavlik + * Copyright (c) 2000 Mark Fletcher + */ + +/* + * Gravis Stinger gamepad driver for Linux + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> + +#define DRIVER_DESC "Gravis Stinger gamepad driver" + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Constants. + */ + +#define STINGER_MAX_LENGTH 8 + +/* + * Per-Stinger data. + */ + +struct stinger { + struct input_dev *dev; + int idx; + unsigned char data[STINGER_MAX_LENGTH]; + char phys[32]; +}; + +/* + * stinger_process_packet() decodes packets the driver receives from the + * Stinger. It updates the data accordingly. + */ + +static void stinger_process_packet(struct stinger *stinger) +{ + struct input_dev *dev = stinger->dev; + unsigned char *data = stinger->data; + + if (!stinger->idx) return; + + input_report_key(dev, BTN_A, ((data[0] & 0x20) >> 5)); + input_report_key(dev, BTN_B, ((data[0] & 0x10) >> 4)); + input_report_key(dev, BTN_C, ((data[0] & 0x08) >> 3)); + input_report_key(dev, BTN_X, ((data[0] & 0x04) >> 2)); + input_report_key(dev, BTN_Y, ((data[3] & 0x20) >> 5)); + input_report_key(dev, BTN_Z, ((data[3] & 0x10) >> 4)); + input_report_key(dev, BTN_TL, ((data[3] & 0x08) >> 3)); + input_report_key(dev, BTN_TR, ((data[3] & 0x04) >> 2)); + input_report_key(dev, BTN_SELECT, ((data[3] & 0x02) >> 1)); + input_report_key(dev, BTN_START, (data[3] & 0x01)); + + input_report_abs(dev, ABS_X, (data[1] & 0x3F) - ((data[0] & 0x01) << 6)); + input_report_abs(dev, ABS_Y, ((data[0] & 0x02) << 5) - (data[2] & 0x3F)); + + input_sync(dev); + + return; +} + +/* + * stinger_interrupt() is called by the low level driver when characters + * are ready for us. We then buffer them for further processing, or call the + * packet processing routine. + */ + +static irqreturn_t stinger_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct stinger *stinger = serio_get_drvdata(serio); + + /* All Stinger packets are 4 bytes */ + + if (stinger->idx < STINGER_MAX_LENGTH) + stinger->data[stinger->idx++] = data; + + if (stinger->idx == 4) { + stinger_process_packet(stinger); + stinger->idx = 0; + } + + return IRQ_HANDLED; +} + +/* + * stinger_disconnect() is the opposite of stinger_connect() + */ + +static void stinger_disconnect(struct serio *serio) +{ + struct stinger *stinger = serio_get_drvdata(serio); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(stinger->dev); + kfree(stinger); +} + +/* + * stinger_connect() is the routine that is called when someone adds a + * new serio device that supports Stinger protocol and registers it as + * an input device. + */ + +static int stinger_connect(struct serio *serio, struct serio_driver *drv) +{ + struct stinger *stinger; + struct input_dev *input_dev; + int err = -ENOMEM; + + stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!stinger || !input_dev) + goto fail1; + + stinger->dev = input_dev; + snprintf(stinger->phys, sizeof(stinger->phys), "%s/serio0", serio->phys); + + input_dev->name = "Gravis Stinger"; + input_dev->phys = stinger->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_STINGER; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_A)] = BIT_MASK(BTN_A) | BIT_MASK(BTN_B) | + BIT_MASK(BTN_C) | BIT_MASK(BTN_X) | BIT_MASK(BTN_Y) | + BIT_MASK(BTN_Z) | BIT_MASK(BTN_TL) | BIT_MASK(BTN_TR) | + BIT_MASK(BTN_START) | BIT_MASK(BTN_SELECT); + input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 4); + input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 4); + + serio_set_drvdata(serio, stinger); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(stinger->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(stinger); + return err; +} + +/* + * The serio driver structure. + */ + +static const struct serio_device_id stinger_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_STINGER, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, stinger_serio_ids); + +static struct serio_driver stinger_drv = { + .driver = { + .name = "stinger", + }, + .description = DRIVER_DESC, + .id_table = stinger_serio_ids, + .interrupt = stinger_interrupt, + .connect = stinger_connect, + .disconnect = stinger_disconnect, +}; + +module_serio_driver(stinger_drv); |