summaryrefslogtreecommitdiffstats
path: root/drivers/input/rmi4/rmi_f12.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/rmi4/rmi_f12.c')
-rw-r--r--drivers/input/rmi4/rmi_f12.c551
1 files changed, 551 insertions, 0 deletions
diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c
new file mode 100644
index 0000000000..7e97944f76
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f12.c
@@ -0,0 +1,551 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2016 Synaptics Incorporated
+ */
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/rmi.h>
+#include "rmi_driver.h"
+#include "rmi_2d_sensor.h"
+
+enum rmi_f12_object_type {
+ RMI_F12_OBJECT_NONE = 0x00,
+ RMI_F12_OBJECT_FINGER = 0x01,
+ RMI_F12_OBJECT_STYLUS = 0x02,
+ RMI_F12_OBJECT_PALM = 0x03,
+ RMI_F12_OBJECT_UNCLASSIFIED = 0x04,
+ RMI_F12_OBJECT_GLOVED_FINGER = 0x06,
+ RMI_F12_OBJECT_NARROW_OBJECT = 0x07,
+ RMI_F12_OBJECT_HAND_EDGE = 0x08,
+ RMI_F12_OBJECT_COVER = 0x0A,
+ RMI_F12_OBJECT_STYLUS_2 = 0x0B,
+ RMI_F12_OBJECT_ERASER = 0x0C,
+ RMI_F12_OBJECT_SMALL_OBJECT = 0x0D,
+};
+
+#define F12_DATA1_BYTES_PER_OBJ 8
+
+struct f12_data {
+ struct rmi_2d_sensor sensor;
+ struct rmi_2d_sensor_platform_data sensor_pdata;
+ bool has_dribble;
+
+ u16 data_addr;
+
+ struct rmi_register_descriptor query_reg_desc;
+ struct rmi_register_descriptor control_reg_desc;
+ struct rmi_register_descriptor data_reg_desc;
+
+ /* F12 Data1 describes sensed objects */
+ const struct rmi_register_desc_item *data1;
+ u16 data1_offset;
+
+ /* F12 Data5 describes finger ACM */
+ const struct rmi_register_desc_item *data5;
+ u16 data5_offset;
+
+ /* F12 Data5 describes Pen */
+ const struct rmi_register_desc_item *data6;
+ u16 data6_offset;
+
+
+ /* F12 Data9 reports relative data */
+ const struct rmi_register_desc_item *data9;
+ u16 data9_offset;
+
+ const struct rmi_register_desc_item *data15;
+ u16 data15_offset;
+
+ unsigned long *abs_mask;
+ unsigned long *rel_mask;
+};
+
+static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
+{
+ const struct rmi_register_desc_item *item;
+ struct rmi_2d_sensor *sensor = &f12->sensor;
+ struct rmi_function *fn = sensor->fn;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ int ret;
+ int offset;
+ u8 buf[15];
+ int pitch_x = 0;
+ int pitch_y = 0;
+ int rx_receivers = 0;
+ int tx_receivers = 0;
+
+ item = rmi_get_register_desc_item(&f12->control_reg_desc, 8);
+ if (!item) {
+ dev_err(&fn->dev,
+ "F12 does not have the sensor tuning control register\n");
+ return -ENODEV;
+ }
+
+ offset = rmi_register_desc_calc_reg_offset(&f12->control_reg_desc, 8);
+
+ if (item->reg_size > sizeof(buf)) {
+ dev_err(&fn->dev,
+ "F12 control8 should be no bigger than %zd bytes, not: %ld\n",
+ sizeof(buf), item->reg_size);
+ return -ENODEV;
+ }
+
+ ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr + offset, buf,
+ item->reg_size);
+ if (ret)
+ return ret;
+
+ offset = 0;
+ if (rmi_register_desc_has_subpacket(item, 0)) {
+ sensor->max_x = (buf[offset + 1] << 8) | buf[offset];
+ sensor->max_y = (buf[offset + 3] << 8) | buf[offset + 2];
+ offset += 4;
+ }
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: max_x: %d max_y: %d\n", __func__,
+ sensor->max_x, sensor->max_y);
+
+ if (rmi_register_desc_has_subpacket(item, 1)) {
+ pitch_x = (buf[offset + 1] << 8) | buf[offset];
+ pitch_y = (buf[offset + 3] << 8) | buf[offset + 2];
+ offset += 4;
+ }
+
+ if (rmi_register_desc_has_subpacket(item, 2)) {
+ /* Units 1/128 sensor pitch */
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+ "%s: Inactive Border xlo:%d xhi:%d ylo:%d yhi:%d\n",
+ __func__,
+ buf[offset], buf[offset + 1],
+ buf[offset + 2], buf[offset + 3]);
+
+ offset += 4;
+ }
+
+ if (rmi_register_desc_has_subpacket(item, 3)) {
+ rx_receivers = buf[offset];
+ tx_receivers = buf[offset + 1];
+ offset += 2;
+ }
+
+ /* Skip over sensor flags */
+ if (rmi_register_desc_has_subpacket(item, 4))
+ offset += 1;
+
+ sensor->x_mm = (pitch_x * rx_receivers) >> 12;
+ sensor->y_mm = (pitch_y * tx_receivers) >> 12;
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x_mm: %d y_mm: %d\n", __func__,
+ sensor->x_mm, sensor->y_mm);
+
+ return 0;
+}
+
+static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size)
+{
+ int i;
+ struct rmi_2d_sensor *sensor = &f12->sensor;
+ int objects = f12->data1->num_subpackets;
+
+ if ((f12->data1->num_subpackets * F12_DATA1_BYTES_PER_OBJ) > size)
+ objects = size / F12_DATA1_BYTES_PER_OBJ;
+
+ for (i = 0; i < objects; i++) {
+ struct rmi_2d_sensor_abs_object *obj = &sensor->objs[i];
+
+ obj->type = RMI_2D_OBJECT_NONE;
+ obj->mt_tool = MT_TOOL_FINGER;
+
+ switch (data1[0]) {
+ case RMI_F12_OBJECT_FINGER:
+ obj->type = RMI_2D_OBJECT_FINGER;
+ break;
+ case RMI_F12_OBJECT_STYLUS:
+ obj->type = RMI_2D_OBJECT_STYLUS;
+ obj->mt_tool = MT_TOOL_PEN;
+ break;
+ case RMI_F12_OBJECT_PALM:
+ obj->type = RMI_2D_OBJECT_PALM;
+ obj->mt_tool = MT_TOOL_PALM;
+ break;
+ case RMI_F12_OBJECT_UNCLASSIFIED:
+ obj->type = RMI_2D_OBJECT_UNCLASSIFIED;
+ break;
+ }
+
+ obj->x = (data1[2] << 8) | data1[1];
+ obj->y = (data1[4] << 8) | data1[3];
+ obj->z = data1[5];
+ obj->wx = data1[6];
+ obj->wy = data1[7];
+
+ rmi_2d_sensor_abs_process(sensor, obj, i);
+
+ data1 += F12_DATA1_BYTES_PER_OBJ;
+ }
+
+ if (sensor->kernel_tracking)
+ input_mt_assign_slots(sensor->input,
+ sensor->tracking_slots,
+ sensor->tracking_pos,
+ sensor->nbr_fingers,
+ sensor->dmax);
+
+ for (i = 0; i < objects; i++)
+ rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
+}
+
+static irqreturn_t rmi_f12_attention(int irq, void *ctx)
+{
+ int retval;
+ struct rmi_function *fn = ctx;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+ struct f12_data *f12 = dev_get_drvdata(&fn->dev);
+ struct rmi_2d_sensor *sensor = &f12->sensor;
+ int valid_bytes = sensor->pkt_size;
+
+ if (drvdata->attn_data.data) {
+ if (sensor->attn_size > drvdata->attn_data.size)
+ valid_bytes = drvdata->attn_data.size;
+ else
+ valid_bytes = sensor->attn_size;
+ memcpy(sensor->data_pkt, drvdata->attn_data.data,
+ valid_bytes);
+ drvdata->attn_data.data += valid_bytes;
+ drvdata->attn_data.size -= valid_bytes;
+ } else {
+ retval = rmi_read_block(rmi_dev, f12->data_addr,
+ sensor->data_pkt, sensor->pkt_size);
+ if (retval < 0) {
+ dev_err(&fn->dev, "Failed to read object data. Code: %d.\n",
+ retval);
+ return IRQ_RETVAL(retval);
+ }
+ }
+
+ if (f12->data1)
+ rmi_f12_process_objects(f12,
+ &sensor->data_pkt[f12->data1_offset], valid_bytes);
+
+ input_mt_sync_frame(sensor->input);
+
+ return IRQ_HANDLED;
+}
+
+static int rmi_f12_write_control_regs(struct rmi_function *fn)
+{
+ int ret;
+ const struct rmi_register_desc_item *item;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ struct f12_data *f12 = dev_get_drvdata(&fn->dev);
+ int control_size;
+ char buf[3];
+ u16 control_offset = 0;
+ u8 subpacket_offset = 0;
+
+ if (f12->has_dribble
+ && (f12->sensor.dribble != RMI_REG_STATE_DEFAULT)) {
+ item = rmi_get_register_desc_item(&f12->control_reg_desc, 20);
+ if (item) {
+ control_offset = rmi_register_desc_calc_reg_offset(
+ &f12->control_reg_desc, 20);
+
+ /*
+ * The byte containing the EnableDribble bit will be
+ * in either byte 0 or byte 2 of control 20. Depending
+ * on the existence of subpacket 0. If control 20 is
+ * larger then 3 bytes, just read the first 3.
+ */
+ control_size = min(item->reg_size, 3UL);
+
+ ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr
+ + control_offset, buf, control_size);
+ if (ret)
+ return ret;
+
+ if (rmi_register_desc_has_subpacket(item, 0))
+ subpacket_offset += 1;
+
+ switch (f12->sensor.dribble) {
+ case RMI_REG_STATE_OFF:
+ buf[subpacket_offset] &= ~BIT(2);
+ break;
+ case RMI_REG_STATE_ON:
+ buf[subpacket_offset] |= BIT(2);
+ break;
+ case RMI_REG_STATE_DEFAULT:
+ default:
+ break;
+ }
+
+ ret = rmi_write_block(rmi_dev,
+ fn->fd.control_base_addr + control_offset,
+ buf, control_size);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+
+}
+
+static int rmi_f12_config(struct rmi_function *fn)
+{
+ struct rmi_driver *drv = fn->rmi_dev->driver;
+ struct f12_data *f12 = dev_get_drvdata(&fn->dev);
+ struct rmi_2d_sensor *sensor;
+ int ret;
+
+ sensor = &f12->sensor;
+
+ if (!sensor->report_abs)
+ drv->clear_irq_bits(fn->rmi_dev, f12->abs_mask);
+ else
+ drv->set_irq_bits(fn->rmi_dev, f12->abs_mask);
+
+ drv->clear_irq_bits(fn->rmi_dev, f12->rel_mask);
+
+ ret = rmi_f12_write_control_regs(fn);
+ if (ret)
+ dev_warn(&fn->dev,
+ "Failed to write F12 control registers: %d\n", ret);
+
+ return 0;
+}
+
+static int rmi_f12_probe(struct rmi_function *fn)
+{
+ struct f12_data *f12;
+ int ret;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ char buf;
+ u16 query_addr = fn->fd.query_base_addr;
+ const struct rmi_register_desc_item *item;
+ struct rmi_2d_sensor *sensor;
+ struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+ struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+ u16 data_offset = 0;
+ int mask_size;
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);
+
+ mask_size = BITS_TO_LONGS(drvdata->irq_count) * sizeof(unsigned long);
+
+ ret = rmi_read(fn->rmi_dev, query_addr, &buf);
+ if (ret < 0) {
+ dev_err(&fn->dev, "Failed to read general info register: %d\n",
+ ret);
+ return -ENODEV;
+ }
+ ++query_addr;
+
+ if (!(buf & BIT(0))) {
+ dev_err(&fn->dev,
+ "Behavior of F12 without register descriptors is undefined.\n");
+ return -ENODEV;
+ }
+
+ f12 = devm_kzalloc(&fn->dev, sizeof(struct f12_data) + mask_size * 2,
+ GFP_KERNEL);
+ if (!f12)
+ return -ENOMEM;
+
+ f12->abs_mask = (unsigned long *)((char *)f12
+ + sizeof(struct f12_data));
+ f12->rel_mask = (unsigned long *)((char *)f12
+ + sizeof(struct f12_data) + mask_size);
+
+ set_bit(fn->irq_pos, f12->abs_mask);
+ set_bit(fn->irq_pos + 1, f12->rel_mask);
+
+ f12->has_dribble = !!(buf & BIT(3));
+
+ if (fn->dev.of_node) {
+ ret = rmi_2d_sensor_of_probe(&fn->dev, &f12->sensor_pdata);
+ if (ret)
+ return ret;
+ } else {
+ f12->sensor_pdata = pdata->sensor_pdata;
+ }
+
+ ret = rmi_read_register_desc(rmi_dev, query_addr,
+ &f12->query_reg_desc);
+ if (ret) {
+ dev_err(&fn->dev,
+ "Failed to read the Query Register Descriptor: %d\n",
+ ret);
+ return ret;
+ }
+ query_addr += 3;
+
+ ret = rmi_read_register_desc(rmi_dev, query_addr,
+ &f12->control_reg_desc);
+ if (ret) {
+ dev_err(&fn->dev,
+ "Failed to read the Control Register Descriptor: %d\n",
+ ret);
+ return ret;
+ }
+ query_addr += 3;
+
+ ret = rmi_read_register_desc(rmi_dev, query_addr,
+ &f12->data_reg_desc);
+ if (ret) {
+ dev_err(&fn->dev,
+ "Failed to read the Data Register Descriptor: %d\n",
+ ret);
+ return ret;
+ }
+ query_addr += 3;
+
+ sensor = &f12->sensor;
+ sensor->fn = fn;
+ f12->data_addr = fn->fd.data_base_addr;
+ sensor->pkt_size = rmi_register_desc_calc_size(&f12->data_reg_desc);
+
+ sensor->axis_align =
+ f12->sensor_pdata.axis_align;
+
+ sensor->x_mm = f12->sensor_pdata.x_mm;
+ sensor->y_mm = f12->sensor_pdata.y_mm;
+ sensor->dribble = f12->sensor_pdata.dribble;
+
+ if (sensor->sensor_type == rmi_sensor_default)
+ sensor->sensor_type =
+ f12->sensor_pdata.sensor_type;
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: data packet size: %d\n", __func__,
+ sensor->pkt_size);
+ sensor->data_pkt = devm_kzalloc(&fn->dev, sensor->pkt_size, GFP_KERNEL);
+ if (!sensor->data_pkt)
+ return -ENOMEM;
+
+ dev_set_drvdata(&fn->dev, f12);
+
+ ret = rmi_f12_read_sensor_tuning(f12);
+ if (ret)
+ return ret;
+
+ /*
+ * Figure out what data is contained in the data registers. HID devices
+ * may have registers defined, but their data is not reported in the
+ * HID attention report. Registers which are not reported in the HID
+ * attention report check to see if the device is receiving data from
+ * HID attention reports.
+ */
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
+ if (item) {
+ f12->data1 = item;
+ f12->data1_offset = data_offset;
+ data_offset += item->reg_size;
+ sensor->nbr_fingers = item->num_subpackets;
+ sensor->report_abs = 1;
+ sensor->attn_size += item->reg_size;
+ }
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
+ if (item) {
+ f12->data5 = item;
+ f12->data5_offset = data_offset;
+ data_offset += item->reg_size;
+ sensor->attn_size += item->reg_size;
+ }
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
+ if (item && !drvdata->attn_data.data) {
+ f12->data6 = item;
+ f12->data6_offset = data_offset;
+ data_offset += item->reg_size;
+ }
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
+ if (item && !drvdata->attn_data.data) {
+ f12->data9 = item;
+ f12->data9_offset = data_offset;
+ data_offset += item->reg_size;
+ if (!sensor->report_abs)
+ sensor->report_rel = 1;
+ }
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
+ if (item && !drvdata->attn_data.data)
+ data_offset += item->reg_size;
+
+ item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
+ if (item && !drvdata->attn_data.data) {
+ f12->data15 = item;
+ f12->data15_offset = data_offset;
+ data_offset += item->reg_size;
+ }
+
+ /* allocate the in-kernel tracking buffers */
+ sensor->tracking_pos = devm_kcalloc(&fn->dev,
+ sensor->nbr_fingers, sizeof(struct input_mt_pos),
+ GFP_KERNEL);
+ sensor->tracking_slots = devm_kcalloc(&fn->dev,
+ sensor->nbr_fingers, sizeof(int), GFP_KERNEL);
+ sensor->objs = devm_kcalloc(&fn->dev,
+ sensor->nbr_fingers,
+ sizeof(struct rmi_2d_sensor_abs_object),
+ GFP_KERNEL);
+ if (!sensor->tracking_pos || !sensor->tracking_slots || !sensor->objs)
+ return -ENOMEM;
+
+ ret = rmi_2d_sensor_configure_input(fn, sensor);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+struct rmi_function_handler rmi_f12_handler = {
+ .driver = {
+ .name = "rmi4_f12",
+ },
+ .func = 0x12,
+ .probe = rmi_f12_probe,
+ .config = rmi_f12_config,
+ .attention = rmi_f12_attention,
+};