summaryrefslogtreecommitdiffstats
path: root/drivers/input/rmi4/rmi_f54.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/rmi4/rmi_f54.c')
-rw-r--r--drivers/input/rmi4/rmi_f54.c757
1 files changed, 757 insertions, 0 deletions
diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c
new file mode 100644
index 0000000000..5c3da910b5
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f54.c
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2015 Synaptics Incorporated
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/videobuf2-vmalloc.h>
+#include "rmi_driver.h"
+
+#define F54_NAME "rmi4_f54"
+
+/* F54 data offsets */
+#define F54_REPORT_DATA_OFFSET 3
+#define F54_FIFO_OFFSET 1
+#define F54_NUM_TX_OFFSET 1
+#define F54_NUM_RX_OFFSET 0
+
+/*
+ * The smbus protocol can read only 32 bytes max at a time.
+ * But this should be fine for i2c/spi as well.
+ */
+#define F54_REPORT_DATA_SIZE 32
+
+/* F54 commands */
+#define F54_GET_REPORT 1
+#define F54_FORCE_CAL 2
+
+/* F54 capabilities */
+#define F54_CAP_BASELINE (1 << 2)
+#define F54_CAP_IMAGE8 (1 << 3)
+#define F54_CAP_IMAGE16 (1 << 6)
+
+/**
+ * enum rmi_f54_report_type - RMI4 F54 report types
+ *
+ * @F54_REPORT_NONE: No Image Report.
+ *
+ * @F54_8BIT_IMAGE: Normalized 8-Bit Image Report. The capacitance variance
+ * from baseline for each pixel.
+ *
+ * @F54_16BIT_IMAGE: Normalized 16-Bit Image Report. The capacitance variance
+ * from baseline for each pixel.
+ *
+ * @F54_RAW_16BIT_IMAGE:
+ * Raw 16-Bit Image Report. The raw capacitance for each
+ * pixel.
+ *
+ * @F54_TRUE_BASELINE: True Baseline Report. The baseline capacitance for each
+ * pixel.
+ *
+ * @F54_FULL_RAW_CAP: Full Raw Capacitance Report. The raw capacitance with
+ * low reference set to its minimum value and high
+ * reference set to its maximum value.
+ *
+ * @F54_FULL_RAW_CAP_RX_OFFSET_REMOVED:
+ * Full Raw Capacitance with Receiver Offset Removed
+ * Report. Set Low reference to its minimum value and high
+ * references to its maximum value, then report the raw
+ * capacitance for each pixel.
+ *
+ * @F54_MAX_REPORT_TYPE:
+ * Maximum number of Report Types. Used for sanity
+ * checking.
+ */
+enum rmi_f54_report_type {
+ F54_REPORT_NONE = 0,
+ F54_8BIT_IMAGE = 1,
+ F54_16BIT_IMAGE = 2,
+ F54_RAW_16BIT_IMAGE = 3,
+ F54_TRUE_BASELINE = 9,
+ F54_FULL_RAW_CAP = 19,
+ F54_FULL_RAW_CAP_RX_OFFSET_REMOVED = 20,
+ F54_MAX_REPORT_TYPE,
+};
+
+static const char * const rmi_f54_report_type_names[] = {
+ [F54_REPORT_NONE] = "Unknown",
+ [F54_8BIT_IMAGE] = "Normalized 8-Bit Image",
+ [F54_16BIT_IMAGE] = "Normalized 16-Bit Image",
+ [F54_RAW_16BIT_IMAGE] = "Raw 16-Bit Image",
+ [F54_TRUE_BASELINE] = "True Baseline",
+ [F54_FULL_RAW_CAP] = "Full Raw Capacitance",
+ [F54_FULL_RAW_CAP_RX_OFFSET_REMOVED]
+ = "Full Raw Capacitance RX Offset Removed",
+};
+
+struct f54_data {
+ struct rmi_function *fn;
+
+ u8 num_rx_electrodes;
+ u8 num_tx_electrodes;
+ u8 capabilities;
+ u16 clock_rate;
+ u8 family;
+
+ enum rmi_f54_report_type report_type;
+ u8 *report_data;
+ int report_size;
+
+ bool is_busy;
+ struct mutex status_mutex;
+ struct mutex data_mutex;
+
+ struct workqueue_struct *workqueue;
+ struct delayed_work work;
+ unsigned long timeout;
+
+ struct completion cmd_done;
+
+ /* V4L2 support */
+ struct v4l2_device v4l2;
+ struct v4l2_pix_format format;
+ struct video_device vdev;
+ struct vb2_queue queue;
+ struct mutex lock;
+ u32 sequence;
+ int input;
+ enum rmi_f54_report_type inputs[F54_MAX_REPORT_TYPE];
+};
+
+/*
+ * Basic checks on report_type to ensure we write a valid type
+ * to the sensor.
+ */
+static bool is_f54_report_type_valid(struct f54_data *f54,
+ enum rmi_f54_report_type reptype)
+{
+ switch (reptype) {
+ case F54_8BIT_IMAGE:
+ return f54->capabilities & F54_CAP_IMAGE8;
+ case F54_16BIT_IMAGE:
+ case F54_RAW_16BIT_IMAGE:
+ return f54->capabilities & F54_CAP_IMAGE16;
+ case F54_TRUE_BASELINE:
+ return f54->capabilities & F54_CAP_IMAGE16;
+ case F54_FULL_RAW_CAP:
+ case F54_FULL_RAW_CAP_RX_OFFSET_REMOVED:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static enum rmi_f54_report_type rmi_f54_get_reptype(struct f54_data *f54,
+ unsigned int i)
+{
+ if (i >= F54_MAX_REPORT_TYPE)
+ return F54_REPORT_NONE;
+
+ return f54->inputs[i];
+}
+
+static void rmi_f54_create_input_map(struct f54_data *f54)
+{
+ int i = 0;
+ enum rmi_f54_report_type reptype;
+
+ for (reptype = 1; reptype < F54_MAX_REPORT_TYPE; reptype++) {
+ if (!is_f54_report_type_valid(f54, reptype))
+ continue;
+
+ f54->inputs[i++] = reptype;
+ }
+
+ /* Remaining values are zero via kzalloc */
+}
+
+static int rmi_f54_request_report(struct rmi_function *fn, u8 report_type)
+{
+ struct f54_data *f54 = dev_get_drvdata(&fn->dev);
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ int error;
+
+ /* Write Report Type into F54_AD_Data0 */
+ if (f54->report_type != report_type) {
+ error = rmi_write(rmi_dev, f54->fn->fd.data_base_addr,
+ report_type);
+ if (error)
+ return error;
+ f54->report_type = report_type;
+ }
+
+ /*
+ * Small delay after disabling interrupts to avoid race condition
+ * in firmare. This value is a bit higher than absolutely necessary.
+ * Should be removed once issue is resolved in firmware.
+ */
+ usleep_range(2000, 3000);
+
+ mutex_lock(&f54->data_mutex);
+
+ error = rmi_write(rmi_dev, fn->fd.command_base_addr, F54_GET_REPORT);
+ if (error < 0)
+ goto unlock;
+
+ init_completion(&f54->cmd_done);
+
+ f54->is_busy = 1;
+ f54->timeout = jiffies + msecs_to_jiffies(100);
+
+ queue_delayed_work(f54->workqueue, &f54->work, 0);
+
+unlock:
+ mutex_unlock(&f54->data_mutex);
+
+ return error;
+}
+
+static size_t rmi_f54_get_report_size(struct f54_data *f54)
+{
+ struct rmi_device *rmi_dev = f54->fn->rmi_dev;
+ struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+ u8 rx = drv_data->num_rx_electrodes ? : f54->num_rx_electrodes;
+ u8 tx = drv_data->num_tx_electrodes ? : f54->num_tx_electrodes;
+ size_t size;
+
+ switch (rmi_f54_get_reptype(f54, f54->input)) {
+ case F54_8BIT_IMAGE:
+ size = rx * tx;
+ break;
+ case F54_16BIT_IMAGE:
+ case F54_RAW_16BIT_IMAGE:
+ case F54_TRUE_BASELINE:
+ case F54_FULL_RAW_CAP:
+ case F54_FULL_RAW_CAP_RX_OFFSET_REMOVED:
+ size = sizeof(u16) * rx * tx;
+ break;
+ default:
+ size = 0;
+ }
+
+ return size;
+}
+
+static int rmi_f54_get_pixel_fmt(enum rmi_f54_report_type reptype, u32 *pixfmt)
+{
+ int ret = 0;
+
+ switch (reptype) {
+ case F54_8BIT_IMAGE:
+ *pixfmt = V4L2_TCH_FMT_DELTA_TD08;
+ break;
+
+ case F54_16BIT_IMAGE:
+ *pixfmt = V4L2_TCH_FMT_DELTA_TD16;
+ break;
+
+ case F54_RAW_16BIT_IMAGE:
+ case F54_TRUE_BASELINE:
+ case F54_FULL_RAW_CAP:
+ case F54_FULL_RAW_CAP_RX_OFFSET_REMOVED:
+ *pixfmt = V4L2_TCH_FMT_TU16;
+ break;
+
+ case F54_REPORT_NONE:
+ case F54_MAX_REPORT_TYPE:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct v4l2_file_operations rmi_f54_video_fops = {
+ .owner = THIS_MODULE,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .unlocked_ioctl = video_ioctl2,
+ .read = vb2_fop_read,
+ .mmap = vb2_fop_mmap,
+ .poll = vb2_fop_poll,
+};
+
+static int rmi_f54_queue_setup(struct vb2_queue *q, unsigned int *nbuffers,
+ unsigned int *nplanes, unsigned int sizes[],
+ struct device *alloc_devs[])
+{
+ struct f54_data *f54 = q->drv_priv;
+
+ if (*nplanes)
+ return sizes[0] < rmi_f54_get_report_size(f54) ? -EINVAL : 0;
+
+ *nplanes = 1;
+ sizes[0] = rmi_f54_get_report_size(f54);
+
+ return 0;
+}
+
+static void rmi_f54_buffer_queue(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct f54_data *f54 = vb2_get_drv_priv(vb->vb2_queue);
+ u16 *ptr;
+ enum vb2_buffer_state state;
+ enum rmi_f54_report_type reptype;
+ int ret;
+
+ mutex_lock(&f54->status_mutex);
+
+ vb2_set_plane_payload(vb, 0, 0);
+ reptype = rmi_f54_get_reptype(f54, f54->input);
+ if (reptype == F54_REPORT_NONE) {
+ state = VB2_BUF_STATE_ERROR;
+ goto done;
+ }
+
+ if (f54->is_busy) {
+ state = VB2_BUF_STATE_ERROR;
+ goto done;
+ }
+
+ ret = rmi_f54_request_report(f54->fn, reptype);
+ if (ret) {
+ dev_err(&f54->fn->dev, "Error requesting F54 report\n");
+ state = VB2_BUF_STATE_ERROR;
+ goto done;
+ }
+
+ /* get frame data */
+ mutex_lock(&f54->data_mutex);
+
+ while (f54->is_busy) {
+ mutex_unlock(&f54->data_mutex);
+ if (!wait_for_completion_timeout(&f54->cmd_done,
+ msecs_to_jiffies(1000))) {
+ dev_err(&f54->fn->dev, "Timed out\n");
+ state = VB2_BUF_STATE_ERROR;
+ goto done;
+ }
+ mutex_lock(&f54->data_mutex);
+ }
+
+ ptr = vb2_plane_vaddr(vb, 0);
+ if (!ptr) {
+ dev_err(&f54->fn->dev, "Error acquiring frame ptr\n");
+ state = VB2_BUF_STATE_ERROR;
+ goto data_done;
+ }
+
+ memcpy(ptr, f54->report_data, f54->report_size);
+ vb2_set_plane_payload(vb, 0, rmi_f54_get_report_size(f54));
+ state = VB2_BUF_STATE_DONE;
+
+data_done:
+ mutex_unlock(&f54->data_mutex);
+done:
+ vb->timestamp = ktime_get_ns();
+ vbuf->field = V4L2_FIELD_NONE;
+ vbuf->sequence = f54->sequence++;
+ vb2_buffer_done(vb, state);
+ mutex_unlock(&f54->status_mutex);
+}
+
+static void rmi_f54_stop_streaming(struct vb2_queue *q)
+{
+ struct f54_data *f54 = vb2_get_drv_priv(q);
+
+ f54->sequence = 0;
+}
+
+/* V4L2 structures */
+static const struct vb2_ops rmi_f54_queue_ops = {
+ .queue_setup = rmi_f54_queue_setup,
+ .buf_queue = rmi_f54_buffer_queue,
+ .stop_streaming = rmi_f54_stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+static const struct vb2_queue rmi_f54_queue = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ .io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ,
+ .buf_struct_size = sizeof(struct vb2_v4l2_buffer),
+ .ops = &rmi_f54_queue_ops,
+ .mem_ops = &vb2_vmalloc_memops,
+ .timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC,
+};
+
+static int rmi_f54_vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct f54_data *f54 = video_drvdata(file);
+
+ strscpy(cap->driver, F54_NAME, sizeof(cap->driver));
+ strscpy(cap->card, SYNAPTICS_INPUT_DEVICE_NAME, sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "rmi4:%s", dev_name(&f54->fn->dev));
+
+ return 0;
+}
+
+static int rmi_f54_vidioc_enum_input(struct file *file, void *priv,
+ struct v4l2_input *i)
+{
+ struct f54_data *f54 = video_drvdata(file);
+ enum rmi_f54_report_type reptype;
+
+ reptype = rmi_f54_get_reptype(f54, i->index);
+ if (reptype == F54_REPORT_NONE)
+ return -EINVAL;
+
+ i->type = V4L2_INPUT_TYPE_TOUCH;
+
+ strscpy(i->name, rmi_f54_report_type_names[reptype], sizeof(i->name));
+ return 0;
+}
+
+static int rmi_f54_set_input(struct f54_data *f54, unsigned int i)
+{
+ struct rmi_device *rmi_dev = f54->fn->rmi_dev;
+ struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+ u8 rx = drv_data->num_rx_electrodes ? : f54->num_rx_electrodes;
+ u8 tx = drv_data->num_tx_electrodes ? : f54->num_tx_electrodes;
+ struct v4l2_pix_format *f = &f54->format;
+ enum rmi_f54_report_type reptype;
+ int ret;
+
+ reptype = rmi_f54_get_reptype(f54, i);
+ if (reptype == F54_REPORT_NONE)
+ return -EINVAL;
+
+ ret = rmi_f54_get_pixel_fmt(reptype, &f->pixelformat);
+ if (ret)
+ return ret;
+
+ f54->input = i;
+
+ f->width = rx;
+ f->height = tx;
+ f->field = V4L2_FIELD_NONE;
+ f->colorspace = V4L2_COLORSPACE_RAW;
+ f->bytesperline = f->width * sizeof(u16);
+ f->sizeimage = f->width * f->height * sizeof(u16);
+
+ return 0;
+}
+
+static int rmi_f54_vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+ return rmi_f54_set_input(video_drvdata(file), i);
+}
+
+static int rmi_f54_vidioc_g_input(struct file *file, void *priv,
+ unsigned int *i)
+{
+ struct f54_data *f54 = video_drvdata(file);
+
+ *i = f54->input;
+
+ return 0;
+}
+
+static int rmi_f54_vidioc_fmt(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct f54_data *f54 = video_drvdata(file);
+
+ f->fmt.pix = f54->format;
+
+ return 0;
+}
+
+static int rmi_f54_vidioc_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *fmt)
+{
+ struct f54_data *f54 = video_drvdata(file);
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (fmt->index)
+ return -EINVAL;
+
+ fmt->pixelformat = f54->format.pixelformat;
+
+ return 0;
+}
+
+static int rmi_f54_vidioc_g_parm(struct file *file, void *fh,
+ struct v4l2_streamparm *a)
+{
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ a->parm.capture.readbuffers = 1;
+ a->parm.capture.timeperframe.numerator = 1;
+ a->parm.capture.timeperframe.denominator = 10;
+ return 0;
+}
+
+static const struct v4l2_ioctl_ops rmi_f54_video_ioctl_ops = {
+ .vidioc_querycap = rmi_f54_vidioc_querycap,
+
+ .vidioc_enum_fmt_vid_cap = rmi_f54_vidioc_enum_fmt,
+ .vidioc_s_fmt_vid_cap = rmi_f54_vidioc_fmt,
+ .vidioc_g_fmt_vid_cap = rmi_f54_vidioc_fmt,
+ .vidioc_try_fmt_vid_cap = rmi_f54_vidioc_fmt,
+ .vidioc_g_parm = rmi_f54_vidioc_g_parm,
+
+ .vidioc_enum_input = rmi_f54_vidioc_enum_input,
+ .vidioc_g_input = rmi_f54_vidioc_g_input,
+ .vidioc_s_input = rmi_f54_vidioc_s_input,
+
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+};
+
+static const struct video_device rmi_f54_video_device = {
+ .name = "Synaptics RMI4",
+ .fops = &rmi_f54_video_fops,
+ .ioctl_ops = &rmi_f54_video_ioctl_ops,
+ .release = video_device_release_empty,
+ .device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TOUCH |
+ V4L2_CAP_READWRITE | V4L2_CAP_STREAMING,
+};
+
+static void rmi_f54_work(struct work_struct *work)
+{
+ struct f54_data *f54 = container_of(work, struct f54_data, work.work);
+ struct rmi_function *fn = f54->fn;
+ u8 fifo[2];
+ int report_size;
+ u8 command;
+ int error;
+ int i;
+
+ report_size = rmi_f54_get_report_size(f54);
+ if (report_size == 0) {
+ dev_err(&fn->dev, "Bad report size, report type=%d\n",
+ f54->report_type);
+ error = -EINVAL;
+ goto error; /* retry won't help */
+ }
+
+ mutex_lock(&f54->data_mutex);
+
+ /*
+ * Need to check if command has completed.
+ * If not try again later.
+ */
+ error = rmi_read(fn->rmi_dev, f54->fn->fd.command_base_addr,
+ &command);
+ if (error) {
+ dev_err(&fn->dev, "Failed to read back command\n");
+ goto error;
+ }
+ if (command & F54_GET_REPORT) {
+ if (time_after(jiffies, f54->timeout)) {
+ dev_err(&fn->dev, "Get report command timed out\n");
+ error = -ETIMEDOUT;
+ }
+ report_size = 0;
+ goto error;
+ }
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Get report command completed, reading data\n");
+
+ for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
+ int size = min(F54_REPORT_DATA_SIZE, report_size - i);
+
+ fifo[0] = i & 0xff;
+ fifo[1] = i >> 8;
+ error = rmi_write_block(fn->rmi_dev,
+ fn->fd.data_base_addr + F54_FIFO_OFFSET,
+ fifo, sizeof(fifo));
+ if (error) {
+ dev_err(&fn->dev, "Failed to set fifo start offset\n");
+ goto abort;
+ }
+
+ error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr +
+ F54_REPORT_DATA_OFFSET,
+ f54->report_data + i, size);
+ if (error) {
+ dev_err(&fn->dev, "%s: read [%d bytes] returned %d\n",
+ __func__, size, error);
+ goto abort;
+ }
+ }
+
+abort:
+ f54->report_size = error ? 0 : report_size;
+error:
+ if (error)
+ report_size = 0;
+
+ if (report_size == 0 && !error) {
+ queue_delayed_work(f54->workqueue, &f54->work,
+ msecs_to_jiffies(1));
+ } else {
+ f54->is_busy = false;
+ complete(&f54->cmd_done);
+ }
+
+ mutex_unlock(&f54->data_mutex);
+}
+
+static int rmi_f54_config(struct rmi_function *fn)
+{
+ struct rmi_driver *drv = fn->rmi_dev->driver;
+
+ drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
+
+ return 0;
+}
+
+static int rmi_f54_detect(struct rmi_function *fn)
+{
+ int error;
+ struct f54_data *f54;
+ u8 buf[6];
+
+ f54 = dev_get_drvdata(&fn->dev);
+
+ error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
+ buf, sizeof(buf));
+ if (error) {
+ dev_err(&fn->dev, "%s: Failed to query F54 properties\n",
+ __func__);
+ return error;
+ }
+
+ f54->num_rx_electrodes = buf[0];
+ f54->num_tx_electrodes = buf[1];
+ f54->capabilities = buf[2];
+ f54->clock_rate = buf[3] | (buf[4] << 8);
+ f54->family = buf[5];
+
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 num_rx_electrodes: %d\n",
+ f54->num_rx_electrodes);
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 num_tx_electrodes: %d\n",
+ f54->num_tx_electrodes);
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 capabilities: 0x%x\n",
+ f54->capabilities);
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 clock rate: 0x%x\n",
+ f54->clock_rate);
+ rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 family: 0x%x\n",
+ f54->family);
+
+ f54->is_busy = false;
+
+ return 0;
+}
+
+static int rmi_f54_probe(struct rmi_function *fn)
+{
+ struct f54_data *f54;
+ int ret;
+ u8 rx, tx;
+
+ f54 = devm_kzalloc(&fn->dev, sizeof(struct f54_data), GFP_KERNEL);
+ if (!f54)
+ return -ENOMEM;
+
+ f54->fn = fn;
+ dev_set_drvdata(&fn->dev, f54);
+
+ ret = rmi_f54_detect(fn);
+ if (ret)
+ return ret;
+
+ mutex_init(&f54->data_mutex);
+ mutex_init(&f54->status_mutex);
+
+ rx = f54->num_rx_electrodes;
+ tx = f54->num_tx_electrodes;
+ f54->report_data = devm_kzalloc(&fn->dev,
+ array3_size(tx, rx, sizeof(u16)),
+ GFP_KERNEL);
+ if (f54->report_data == NULL)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&f54->work, rmi_f54_work);
+
+ f54->workqueue = create_singlethread_workqueue("rmi4-poller");
+ if (!f54->workqueue)
+ return -ENOMEM;
+
+ rmi_f54_create_input_map(f54);
+ rmi_f54_set_input(f54, 0);
+
+ /* register video device */
+ strscpy(f54->v4l2.name, F54_NAME, sizeof(f54->v4l2.name));
+ ret = v4l2_device_register(&fn->dev, &f54->v4l2);
+ if (ret) {
+ dev_err(&fn->dev, "Unable to register video dev.\n");
+ goto remove_wq;
+ }
+
+ /* initialize the queue */
+ mutex_init(&f54->lock);
+ f54->queue = rmi_f54_queue;
+ f54->queue.drv_priv = f54;
+ f54->queue.lock = &f54->lock;
+ f54->queue.dev = &fn->dev;
+
+ ret = vb2_queue_init(&f54->queue);
+ if (ret)
+ goto remove_v4l2;
+
+ f54->vdev = rmi_f54_video_device;
+ f54->vdev.v4l2_dev = &f54->v4l2;
+ f54->vdev.lock = &f54->lock;
+ f54->vdev.vfl_dir = VFL_DIR_RX;
+ f54->vdev.queue = &f54->queue;
+ video_set_drvdata(&f54->vdev, f54);
+
+ ret = video_register_device(&f54->vdev, VFL_TYPE_TOUCH, -1);
+ if (ret) {
+ dev_err(&fn->dev, "Unable to register video subdevice.");
+ goto remove_v4l2;
+ }
+
+ return 0;
+
+remove_v4l2:
+ v4l2_device_unregister(&f54->v4l2);
+remove_wq:
+ cancel_delayed_work_sync(&f54->work);
+ destroy_workqueue(f54->workqueue);
+ return ret;
+}
+
+static void rmi_f54_remove(struct rmi_function *fn)
+{
+ struct f54_data *f54 = dev_get_drvdata(&fn->dev);
+
+ video_unregister_device(&f54->vdev);
+ v4l2_device_unregister(&f54->v4l2);
+ destroy_workqueue(f54->workqueue);
+}
+
+struct rmi_function_handler rmi_f54_handler = {
+ .driver = {
+ .name = F54_NAME,
+ },
+ .func = 0x54,
+ .probe = rmi_f54_probe,
+ .config = rmi_f54_config,
+ .remove = rmi_f54_remove,
+};