diff options
Diffstat (limited to 'drivers/input/serio/Kconfig')
| -rw-r--r-- | drivers/input/serio/Kconfig | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig new file mode 100644 index 0000000000..17edc15974 --- /dev/null +++ b/drivers/input/serio/Kconfig @@ -0,0 +1,322 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Input core configuration +# +config SERIO + tristate "Serial I/O support" + default y + help + Say Yes here if you have any input device that uses serial I/O to + communicate with the system. This includes the + * standard AT keyboard and PS/2 mouse * + as well as serial mice, Sun keyboards, some joysticks and 6dof + devices and more. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called serio. + +config ARCH_MIGHT_HAVE_PC_SERIO + bool + help + Select this config option from the architecture Kconfig if + the architecture might use a PC serio device (i8042) to + communicate with keyboard, mouse, etc. + +if SERIO + +config SERIO_I8042 + tristate "i8042 PC Keyboard controller" + default y + depends on ARCH_MIGHT_HAVE_PC_SERIO + help + i8042 is the chip over which the standard AT keyboard and PS/2 + mouse are connected to the computer. If you use these devices, + you'll need to say Y here. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called i8042. + +config SERIO_SERPORT + tristate "Serial port line discipline" + default y + depends on TTY + help + Say Y here if you plan to use an input device (mouse, joystick, + tablet, 6dof) that communicates over the RS232 serial (COM) port. + + More information is available: <file:Documentation/input/input.rst> + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called serport. + +config SERIO_CT82C710 + tristate "ct82c710 Aux port controller" + depends on X86 + help + Say Y here if you have a Texas Instruments TravelMate notebook + equipped with the ct82c710 chip and want to use a mouse connected + to the "QuickPort". + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ct82c710. + +config SERIO_Q40KBD + tristate "Q40 keyboard controller" + depends on Q40 + +config SERIO_PARKBD + tristate "Parallel port keyboard adapter" + depends on PARPORT + help + Say Y here if you built a simple parallel port adapter to attach + an additional AT keyboard, XT keyboard or PS/2 mouse. + + More information is available: <file:Documentation/input/input.rst> + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called parkbd. + +config SERIO_RPCKBD + tristate "Acorn RiscPC keyboard controller" + depends on ARCH_ACORN + default y + help + Say Y here if you have the Acorn RiscPC and want to use an AT + keyboard connected to its keyboard controller. + + To compile this driver as a module, choose M here: the + module will be called rpckbd. + +config SERIO_AMBAKMI + tristate "AMBA KMI keyboard controller" + depends on ARM_AMBA + +config SERIO_SA1111 + tristate "Intel SA1111 keyboard controller" + depends on SA1111 + +config SERIO_GSCPS2 + tristate "HP GSC PS/2 keyboard and PS/2 mouse controller" + depends on GSC + default y + help + This driver provides support for the PS/2 ports on PA-RISC machines + over which HP PS/2 keyboards and PS/2 mice may be connected. + If you use these devices, you'll need to say Y here. + + It's safe to enable this driver, so if unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called gscps2. + +config HP_SDC + tristate "HP System Device Controller i8042 Support" + depends on (GSC || HP300) && SERIO + default y + help + This option enables support for the "System Device + Controller", an i8042 carrying microcode to manage a + few miscellaneous devices on some Hewlett Packard systems. + The SDC itself contains a 10ms resolution timer/clock capable + of delivering interrupts on a periodic and one-shot basis. + The SDC may also be connected to a battery-backed real-time + clock, a basic audio waveform generator, and an HP-HIL Master + Link Controller serving up to seven input devices. + + By itself this option is rather useless, but enabling it will + enable selection of drivers for the abovementioned devices. + It is, however, incompatible with the old, reliable HIL keyboard + driver, and the new HIL driver is experimental, so if you plan + to use a HIL keyboard as your primary keyboard, you may wish + to keep using that driver until the new HIL drivers have had + more testing. + +config HIL_MLC + tristate "HIL MLC Support (needed for HIL input devices)" + depends on HP_SDC + +config SERIO_PCIPS2 + tristate "PCI PS/2 keyboard and PS/2 mouse controller" + depends on PCI + depends on HAS_IOPORT + help + Say Y here if you have a Mobility Docking station with PS/2 + keyboard and mice ports. + + To compile this driver as a module, choose M here: the + module will be called pcips2. + +config SERIO_MACEPS2 + tristate "SGI O2 MACE PS/2 controller" + depends on SGI_IP32 + help + Say Y here if you have SGI O2 workstation and want to use its + PS/2 ports. + + To compile this driver as a module, choose M here: the + module will be called maceps2. + +config SERIO_SGI_IOC3 + tristate "SGI IOC3 PS/2 controller" + depends on SGI_MFD_IOC3 + help + Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card + and you want to attach and use a keyboard, mouse, or both. + + To compile this driver as a module, choose M here: the + module will be called ioc3kbd. + +config SERIO_LIBPS2 + tristate "PS/2 driver library" + depends on SERIO_I8042 || SERIO_I8042=n + help + Say Y here if you are using a driver for device connected + to a PS/2 port, such as PS/2 mouse or standard AT keyboard. + + To compile this driver as a module, choose M here: the + module will be called libps2. + +config SERIO_RAW + tristate "Raw access to serio ports" + help + Say Y here if you want to have raw access to serio ports, such as + AUX ports on i8042 keyboard controller. Each serio port that is + bound to this driver will be accessible via a char device with + major 10 and dynamically allocated minor. The driver will try + allocating minor 1 (that historically corresponds to /dev/psaux) + first. To bind this driver to a serio port use sysfs interface: + + echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl + + To compile this driver as a module, choose M here: the + module will be called serio_raw. + +config SERIO_XILINX_XPS_PS2 + tristate "Xilinx XPS PS/2 Controller Support" + depends on PPC || MICROBLAZE + help + This driver supports XPS PS/2 IP from the Xilinx EDK on + PowerPC platform. + + To compile this driver as a module, choose M here: the + module will be called xilinx_ps2. + +config SERIO_ALTERA_PS2 + tristate "Altera UP PS/2 controller" + depends on HAS_IOMEM + help + Say Y here if you have Altera University Program PS/2 ports. + + To compile this driver as a module, choose M here: the + module will be called altera_ps2. + +config SERIO_AMS_DELTA + tristate "Amstrad Delta (E3) mailboard support" + depends on MACH_AMS_DELTA + default y + help + Say Y here if you have an E3 and want to use its mailboard, + or any standard AT keyboard connected to the mailboard port. + + When used for the E3 mailboard, a non-standard key table + must be loaded from userspace, possibly using udev extras + provided keymap helper utility. + + To compile this driver as a module, choose M here; + the module will be called ams_delta_serio. + +config SERIO_PS2MULT + tristate "TQC PS/2 multiplexer" + help + Say Y here if you have the PS/2 line multiplexer like the one + present on TQC boards. + + To compile this driver as a module, choose M here: the + module will be called ps2mult. + +config SERIO_ARC_PS2 + tristate "ARC PS/2 support" + depends on HAS_IOMEM + help + Say Y here if you have an ARC FPGA platform with a PS/2 + controller in it. + + To compile this driver as a module, choose M here; the module + will be called arc_ps2. + +config SERIO_APBPS2 + tristate "GRLIB APBPS2 PS/2 keyboard/mouse controller" + depends on OF && HAS_IOMEM + help + Say Y here if you want support for GRLIB APBPS2 peripherals used + to connect to PS/2 keyboard and/or mouse. + + To compile this driver as a module, choose M here: the module will + be called apbps2. + +config SERIO_OLPC_APSP + tristate "OLPC AP-SP input support" + depends on ARCH_MMP || COMPILE_TEST + help + Say Y here if you want support for the keyboard and touchpad included + in the OLPC XO-1.75 and XO-4 laptops. + + To compile this driver as a module, choose M here: the module will + be called olpc_apsp. + +config HYPERV_KEYBOARD + tristate "Microsoft Synthetic Keyboard driver" + depends on HYPERV + default HYPERV + help + Select this option to enable the Hyper-V Keyboard driver. + + To compile this driver as a module, choose M here: the module will + be called hyperv_keyboard. + +config SERIO_SUN4I_PS2 + tristate "Allwinner A10 PS/2 controller support" + depends on ARCH_SUNXI || COMPILE_TEST + help + This selects support for the PS/2 Host Controller on + Allwinner A10. + + To compile this driver as a module, choose M here: the + module will be called sun4i-ps2. + +config SERIO_GPIO_PS2 + tristate "GPIO PS/2 bit banging driver" + depends on GPIOLIB + help + Say Y here if you want PS/2 bit banging support via GPIO. + + To compile this driver as a module, choose M here: the + module will be called ps2-gpio. + + If you are unsure, say N. + +config USERIO + tristate "User space serio port driver support" + help + Say Y here if you want to support user level drivers for serio + subsystem accessible under char device 10:240 - /dev/userio. Using + this facility userspace programs can implement serio ports that + will be used by the standard in-kernel serio consumer drivers, + such as psmouse and atkbd. + + To compile this driver as a module, choose M here: the module will be + called userio. + + If you are unsure, say N. + +endif |