diff options
Diffstat (limited to 'drivers/input/touchscreen/chipone_icn8505.c')
| -rw-r--r-- | drivers/input/touchscreen/chipone_icn8505.c | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/chipone_icn8505.c b/drivers/input/touchscreen/chipone_icn8505.c new file mode 100644 index 0000000000..b56954830b --- /dev/null +++ b/drivers/input/touchscreen/chipone_icn8505.c @@ -0,0 +1,508 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for ChipOne icn8505 i2c touchscreen controller + * + * Copyright (c) 2015-2018 Red Hat Inc. + * + * Red Hat authors: + * Hans de Goede <hdegoede@redhat.com> + */ + +#include <asm/unaligned.h> +#include <linux/acpi.h> +#include <linux/crc32.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/module.h> + +/* Normal operation mode defines */ +#define ICN8505_REG_ADDR_WIDTH 16 + +#define ICN8505_REG_POWER 0x0004 +#define ICN8505_REG_TOUCHDATA 0x1000 +#define ICN8505_REG_CONFIGDATA 0x8000 + +/* ICN8505_REG_POWER commands */ +#define ICN8505_POWER_ACTIVE 0x00 +#define ICN8505_POWER_MONITOR 0x01 +#define ICN8505_POWER_HIBERNATE 0x02 +/* + * The Android driver uses these to turn on/off the charger filter, but the + * filter is way too aggressive making e.g. onscreen keyboards unusable. + */ +#define ICN8505_POWER_ENA_CHARGER_MODE 0x55 +#define ICN8505_POWER_DIS_CHARGER_MODE 0x66 + +#define ICN8505_MAX_TOUCHES 10 + +/* Programming mode defines */ +#define ICN8505_PROG_I2C_ADDR 0x30 +#define ICN8505_PROG_REG_ADDR_WIDTH 24 + +#define MAX_FW_UPLOAD_TRIES 3 + +struct icn8505_touch { + u8 slot; + u8 x[2]; + u8 y[2]; + u8 pressure; /* Seems more like finger width then pressure really */ + u8 event; +/* The difference between 2 and 3 is unclear */ +#define ICN8505_EVENT_NO_DATA 1 /* No finger seen yet since wakeup */ +#define ICN8505_EVENT_UPDATE1 2 /* New or updated coordinates */ +#define ICN8505_EVENT_UPDATE2 3 /* New or updated coordinates */ +#define ICN8505_EVENT_END 4 /* Finger lifted */ +} __packed; + +struct icn8505_touch_data { + u8 softbutton; + u8 touch_count; + struct icn8505_touch touches[ICN8505_MAX_TOUCHES]; +} __packed; + +struct icn8505_data { + struct i2c_client *client; + struct input_dev *input; + struct gpio_desc *wake_gpio; + struct touchscreen_properties prop; + char firmware_name[32]; +}; + +static int icn8505_read_xfer(struct i2c_client *client, u16 i2c_addr, + int reg_addr, int reg_addr_width, + void *data, int len, bool silent) +{ + u8 buf[3]; + int i, ret; + struct i2c_msg msg[2] = { + { + .addr = i2c_addr, + .buf = buf, + .len = reg_addr_width / 8, + }, + { + .addr = i2c_addr, + .flags = I2C_M_RD, + .buf = data, + .len = len, + } + }; + + for (i = 0; i < (reg_addr_width / 8); i++) + buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret != ARRAY_SIZE(msg)) { + if (ret >= 0) + ret = -EIO; + if (!silent) + dev_err(&client->dev, + "Error reading addr %#x reg %#x: %d\n", + i2c_addr, reg_addr, ret); + return ret; + } + + return 0; +} + +static int icn8505_write_xfer(struct i2c_client *client, u16 i2c_addr, + int reg_addr, int reg_addr_width, + const void *data, int len, bool silent) +{ + u8 buf[3 + 32]; /* 3 bytes for 24 bit reg-addr + 32 bytes max len */ + int i, ret; + struct i2c_msg msg = { + .addr = i2c_addr, + .buf = buf, + .len = reg_addr_width / 8 + len, + }; + + if (WARN_ON(len > 32)) + return -EINVAL; + + for (i = 0; i < (reg_addr_width / 8); i++) + buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff; + + memcpy(buf + reg_addr_width / 8, data, len); + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret != 1) { + if (ret >= 0) + ret = -EIO; + if (!silent) + dev_err(&client->dev, + "Error writing addr %#x reg %#x: %d\n", + i2c_addr, reg_addr, ret); + return ret; + } + + return 0; +} + +static int icn8505_read_data(struct icn8505_data *icn8505, int reg, + void *buf, int len) +{ + return icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg, + ICN8505_REG_ADDR_WIDTH, buf, len, false); +} + +static int icn8505_read_reg_silent(struct icn8505_data *icn8505, int reg) +{ + u8 buf; + int error; + + error = icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg, + ICN8505_REG_ADDR_WIDTH, &buf, 1, true); + if (error) + return error; + + return buf; +} + +static int icn8505_write_reg(struct icn8505_data *icn8505, int reg, u8 val) +{ + return icn8505_write_xfer(icn8505->client, icn8505->client->addr, reg, + ICN8505_REG_ADDR_WIDTH, &val, 1, false); +} + +static int icn8505_read_prog_data(struct icn8505_data *icn8505, int reg, + void *buf, int len) +{ + return icn8505_read_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg, + ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false); +} + +static int icn8505_write_prog_data(struct icn8505_data *icn8505, int reg, + const void *buf, int len) +{ + return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg, + ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false); +} + +static int icn8505_write_prog_reg(struct icn8505_data *icn8505, int reg, u8 val) +{ + return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg, + ICN8505_PROG_REG_ADDR_WIDTH, &val, 1, false); +} + +/* + * Note this function uses a number of magic register addresses and values, + * there are deliberately no defines for these because the algorithm is taken + * from the icn85xx Android driver and I do not want to make up possibly wrong + * names for the addresses and/or values. + */ +static int icn8505_try_fw_upload(struct icn8505_data *icn8505, + const struct firmware *fw) +{ + struct device *dev = &icn8505->client->dev; + size_t offset, count; + int error; + u8 buf[4]; + u32 crc; + + /* Put the controller in programming mode */ + error = icn8505_write_prog_reg(icn8505, 0xcc3355, 0x5a); + if (error) + return error; + + usleep_range(2000, 5000); + + error = icn8505_write_prog_reg(icn8505, 0x040400, 0x01); + if (error) + return error; + + usleep_range(2000, 5000); + + error = icn8505_read_prog_data(icn8505, 0x040002, buf, 1); + if (error) + return error; + + if (buf[0] != 0x85) { + dev_err(dev, "Failed to enter programming mode\n"); + return -ENODEV; + } + + usleep_range(1000, 5000); + + /* Enable CRC mode */ + error = icn8505_write_prog_reg(icn8505, 0x40028, 1); + if (error) + return error; + + /* Send the firmware to SRAM */ + for (offset = 0; offset < fw->size; offset += count) { + count = min_t(size_t, fw->size - offset, 32); + error = icn8505_write_prog_data(icn8505, offset, + fw->data + offset, count); + if (error) + return error; + } + + /* Disable CRC mode */ + error = icn8505_write_prog_reg(icn8505, 0x40028, 0); + if (error) + return error; + + /* Get and check length and CRC */ + error = icn8505_read_prog_data(icn8505, 0x40034, buf, 2); + if (error) + return error; + + if (get_unaligned_le16(buf) != fw->size) { + dev_warn(dev, "Length mismatch after uploading fw\n"); + return -EIO; + } + + error = icn8505_read_prog_data(icn8505, 0x4002c, buf, 4); + if (error) + return error; + + crc = crc32_be(0, fw->data, fw->size); + if (get_unaligned_le32(buf) != crc) { + dev_warn(dev, "CRC mismatch after uploading fw\n"); + return -EIO; + } + + /* Boot controller from SRAM */ + error = icn8505_write_prog_reg(icn8505, 0x40400, 0x03); + if (error) + return error; + + usleep_range(2000, 5000); + return 0; +} + +static int icn8505_upload_fw(struct icn8505_data *icn8505) +{ + struct device *dev = &icn8505->client->dev; + const struct firmware *fw; + int i, error; + + /* + * Always load the firmware, even if we don't need it at boot, we + * we may need it at resume. Having loaded it once will make the + * firmware class code cache it at suspend/resume. + */ + error = firmware_request_platform(&fw, icn8505->firmware_name, dev); + if (error) { + dev_err(dev, "Firmware request error %d\n", error); + return error; + } + + /* Check if the controller is not already up and running */ + if (icn8505_read_reg_silent(icn8505, 0x000a) == 0x85) + goto success; + + for (i = 1; i <= MAX_FW_UPLOAD_TRIES; i++) { + error = icn8505_try_fw_upload(icn8505, fw); + if (!error) + goto success; + + dev_err(dev, "Failed to upload firmware: %d (attempt %d/%d)\n", + error, i, MAX_FW_UPLOAD_TRIES); + usleep_range(2000, 5000); + } + +success: + release_firmware(fw); + return error; +} + +static bool icn8505_touch_active(u8 event) +{ + return event == ICN8505_EVENT_UPDATE1 || + event == ICN8505_EVENT_UPDATE2; +} + +static irqreturn_t icn8505_irq(int irq, void *dev_id) +{ + struct icn8505_data *icn8505 = dev_id; + struct device *dev = &icn8505->client->dev; + struct icn8505_touch_data touch_data; + int i, error; + + error = icn8505_read_data(icn8505, ICN8505_REG_TOUCHDATA, + &touch_data, sizeof(touch_data)); + if (error) { + dev_err(dev, "Error reading touch data: %d\n", error); + return IRQ_HANDLED; + } + + if (touch_data.touch_count > ICN8505_MAX_TOUCHES) { + dev_warn(dev, "Too many touches %d > %d\n", + touch_data.touch_count, ICN8505_MAX_TOUCHES); + touch_data.touch_count = ICN8505_MAX_TOUCHES; + } + + for (i = 0; i < touch_data.touch_count; i++) { + struct icn8505_touch *touch = &touch_data.touches[i]; + bool act = icn8505_touch_active(touch->event); + + input_mt_slot(icn8505->input, touch->slot); + input_mt_report_slot_state(icn8505->input, MT_TOOL_FINGER, act); + if (!act) + continue; + + touchscreen_report_pos(icn8505->input, &icn8505->prop, + get_unaligned_le16(touch->x), + get_unaligned_le16(touch->y), + true); + } + + input_mt_sync_frame(icn8505->input); + input_report_key(icn8505->input, KEY_LEFTMETA, + touch_data.softbutton == 1); + input_sync(icn8505->input); + + return IRQ_HANDLED; +} + +static int icn8505_probe_acpi(struct icn8505_data *icn8505, struct device *dev) +{ + const char *subsys; + int error; + + subsys = acpi_get_subsystem_id(ACPI_HANDLE(dev)); + error = PTR_ERR_OR_ZERO(subsys); + if (error == -ENODATA) + subsys = "unknown"; + else if (error) + return error; + + snprintf(icn8505->firmware_name, sizeof(icn8505->firmware_name), + "chipone/icn8505-%s.fw", subsys); + + kfree_const(subsys); + return 0; +} + +static int icn8505_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct icn8505_data *icn8505; + struct input_dev *input; + __le16 resolution[2]; + int error; + + if (!client->irq) { + dev_err(dev, "No irq specified\n"); + return -EINVAL; + } + + icn8505 = devm_kzalloc(dev, sizeof(*icn8505), GFP_KERNEL); + if (!icn8505) + return -ENOMEM; + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + input->name = client->name; + input->id.bustype = BUS_I2C; + + input_set_capability(input, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y); + input_set_capability(input, EV_KEY, KEY_LEFTMETA); + + icn8505->client = client; + icn8505->input = input; + input_set_drvdata(input, icn8505); + + error = icn8505_probe_acpi(icn8505, dev); + if (error) + return error; + + error = icn8505_upload_fw(icn8505); + if (error) + return error; + + error = icn8505_read_data(icn8505, ICN8505_REG_CONFIGDATA, + resolution, sizeof(resolution)); + if (error) { + dev_err(dev, "Error reading resolution: %d\n", error); + return error; + } + + input_set_abs_params(input, ABS_MT_POSITION_X, 0, + le16_to_cpu(resolution[0]) - 1, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, + le16_to_cpu(resolution[1]) - 1, 0, 0); + + touchscreen_parse_properties(input, true, &icn8505->prop); + if (!input_abs_get_max(input, ABS_MT_POSITION_X) || + !input_abs_get_max(input, ABS_MT_POSITION_Y)) { + dev_err(dev, "Error touchscreen-size-x and/or -y missing\n"); + return -EINVAL; + } + + error = input_mt_init_slots(input, ICN8505_MAX_TOUCHES, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) + return error; + + error = devm_request_threaded_irq(dev, client->irq, NULL, icn8505_irq, + IRQF_ONESHOT, client->name, icn8505); + if (error) { + dev_err(dev, "Error requesting irq: %d\n", error); + return error; + } + + error = input_register_device(input); + if (error) + return error; + + i2c_set_clientdata(client, icn8505); + return 0; +} + +static int icn8505_suspend(struct device *dev) +{ + struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev)); + + disable_irq(icn8505->client->irq); + + icn8505_write_reg(icn8505, ICN8505_REG_POWER, ICN8505_POWER_HIBERNATE); + + return 0; +} + +static int icn8505_resume(struct device *dev) +{ + struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev)); + int error; + + error = icn8505_upload_fw(icn8505); + if (error) + return error; + + enable_irq(icn8505->client->irq); + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(icn8505_pm_ops, icn8505_suspend, icn8505_resume); + +static const struct acpi_device_id icn8505_acpi_match[] = { + { "CHPN0001" }, + { } +}; +MODULE_DEVICE_TABLE(acpi, icn8505_acpi_match); + +static struct i2c_driver icn8505_driver = { + .driver = { + .name = "chipone_icn8505", + .pm = pm_sleep_ptr(&icn8505_pm_ops), + .acpi_match_table = icn8505_acpi_match, + }, + .probe = icn8505_probe, +}; + +module_i2c_driver(icn8505_driver); + +MODULE_DESCRIPTION("ChipOne icn8505 I2C Touchscreen Driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL"); |