diff options
Diffstat (limited to 'drivers/input/touchscreen/silead.c')
| -rw-r--r-- | drivers/input/touchscreen/silead.c | 840 |
1 files changed, 840 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c new file mode 100644 index 0000000000..62f562ad50 --- /dev/null +++ b/drivers/input/touchscreen/silead.c @@ -0,0 +1,840 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ------------------------------------------------------------------------- + * Copyright (C) 2014-2015, Intel Corporation + * + * Derived from: + * gslX68X.c + * Copyright (C) 2010-2015, Shanghai Sileadinc Co.Ltd + * + * ------------------------------------------------------------------------- + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/interrupt.h> +#include <linux/gpio/consumer.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/irq.h> +#include <linux/regulator/consumer.h> + +#include <asm/unaligned.h> + +#define SILEAD_TS_NAME "silead_ts" + +#define SILEAD_REG_RESET 0xE0 +#define SILEAD_REG_DATA 0x80 +#define SILEAD_REG_TOUCH_NR 0x80 +#define SILEAD_REG_POWER 0xBC +#define SILEAD_REG_CLOCK 0xE4 +#define SILEAD_REG_STATUS 0xB0 +#define SILEAD_REG_ID 0xFC +#define SILEAD_REG_MEM_CHECK 0xB0 + +#define SILEAD_STATUS_OK 0x5A5A5A5A +#define SILEAD_TS_DATA_LEN 44 +#define SILEAD_CLOCK 0x04 + +#define SILEAD_CMD_RESET 0x88 +#define SILEAD_CMD_START 0x00 + +#define SILEAD_POINT_DATA_LEN 0x04 +#define SILEAD_POINT_Y_OFF 0x00 +#define SILEAD_POINT_Y_MSB_OFF 0x01 +#define SILEAD_POINT_X_OFF 0x02 +#define SILEAD_POINT_X_MSB_OFF 0x03 +#define SILEAD_EXTRA_DATA_MASK 0xF0 + +#define SILEAD_CMD_SLEEP_MIN 10000 +#define SILEAD_CMD_SLEEP_MAX 20000 +#define SILEAD_POWER_SLEEP 20 +#define SILEAD_STARTUP_SLEEP 30 + +#define SILEAD_MAX_FINGERS 10 + +enum silead_ts_power { + SILEAD_POWER_ON = 1, + SILEAD_POWER_OFF = 0 +}; + +struct silead_ts_data { + struct i2c_client *client; + struct gpio_desc *gpio_power; + struct input_dev *input; + struct input_dev *pen_input; + struct regulator_bulk_data regulators[2]; + char fw_name[64]; + struct touchscreen_properties prop; + u32 max_fingers; + u32 chip_id; + struct input_mt_pos pos[SILEAD_MAX_FINGERS]; + int slots[SILEAD_MAX_FINGERS]; + int id[SILEAD_MAX_FINGERS]; + u32 efi_fw_min_max[4]; + bool efi_fw_min_max_set; + bool pen_supported; + bool pen_down; + u32 pen_x_res; + u32 pen_y_res; + int pen_up_count; +}; + +struct silead_fw_data { + u32 offset; + u32 val; +}; + +static void silead_apply_efi_fw_min_max(struct silead_ts_data *data) +{ + struct input_absinfo *absinfo_x = &data->input->absinfo[ABS_MT_POSITION_X]; + struct input_absinfo *absinfo_y = &data->input->absinfo[ABS_MT_POSITION_Y]; + + if (!data->efi_fw_min_max_set) + return; + + absinfo_x->minimum = data->efi_fw_min_max[0]; + absinfo_x->maximum = data->efi_fw_min_max[1]; + absinfo_y->minimum = data->efi_fw_min_max[2]; + absinfo_y->maximum = data->efi_fw_min_max[3]; + + if (data->prop.invert_x) { + absinfo_x->maximum -= absinfo_x->minimum; + absinfo_x->minimum = 0; + } + + if (data->prop.invert_y) { + absinfo_y->maximum -= absinfo_y->minimum; + absinfo_y->minimum = 0; + } + + if (data->prop.swap_x_y) { + swap(absinfo_x->minimum, absinfo_y->minimum); + swap(absinfo_x->maximum, absinfo_y->maximum); + } +} + +static int silead_ts_request_input_dev(struct silead_ts_data *data) +{ + struct device *dev = &data->client->dev; + int error; + + data->input = devm_input_allocate_device(dev); + if (!data->input) { + dev_err(dev, + "Failed to allocate input device\n"); + return -ENOMEM; + } + + input_set_abs_params(data->input, ABS_MT_POSITION_X, 0, 4095, 0, 0); + input_set_abs_params(data->input, ABS_MT_POSITION_Y, 0, 4095, 0, 0); + touchscreen_parse_properties(data->input, true, &data->prop); + silead_apply_efi_fw_min_max(data); + + input_mt_init_slots(data->input, data->max_fingers, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED | + INPUT_MT_TRACK); + + if (device_property_read_bool(dev, "silead,home-button")) + input_set_capability(data->input, EV_KEY, KEY_LEFTMETA); + + data->input->name = SILEAD_TS_NAME; + data->input->phys = "input/ts"; + data->input->id.bustype = BUS_I2C; + + error = input_register_device(data->input); + if (error) { + dev_err(dev, "Failed to register input device: %d\n", error); + return error; + } + + return 0; +} + +static int silead_ts_request_pen_input_dev(struct silead_ts_data *data) +{ + struct device *dev = &data->client->dev; + int error; + + if (!data->pen_supported) + return 0; + + data->pen_input = devm_input_allocate_device(dev); + if (!data->pen_input) + return -ENOMEM; + + input_set_abs_params(data->pen_input, ABS_X, 0, 4095, 0, 0); + input_set_abs_params(data->pen_input, ABS_Y, 0, 4095, 0, 0); + input_set_capability(data->pen_input, EV_KEY, BTN_TOUCH); + input_set_capability(data->pen_input, EV_KEY, BTN_TOOL_PEN); + set_bit(INPUT_PROP_DIRECT, data->pen_input->propbit); + touchscreen_parse_properties(data->pen_input, false, &data->prop); + input_abs_set_res(data->pen_input, ABS_X, data->pen_x_res); + input_abs_set_res(data->pen_input, ABS_Y, data->pen_y_res); + + data->pen_input->name = SILEAD_TS_NAME " pen"; + data->pen_input->phys = "input/pen"; + data->input->id.bustype = BUS_I2C; + + error = input_register_device(data->pen_input); + if (error) { + dev_err(dev, "Failed to register pen input device: %d\n", error); + return error; + } + + return 0; +} + +static void silead_ts_set_power(struct i2c_client *client, + enum silead_ts_power state) +{ + struct silead_ts_data *data = i2c_get_clientdata(client); + + if (data->gpio_power) { + gpiod_set_value_cansleep(data->gpio_power, state); + msleep(SILEAD_POWER_SLEEP); + } +} + +static bool silead_ts_handle_pen_data(struct silead_ts_data *data, u8 *buf) +{ + u8 *coord = buf + SILEAD_POINT_DATA_LEN; + struct input_mt_pos pos; + + if (!data->pen_supported || buf[2] != 0x00 || buf[3] != 0x00) + return false; + + if (buf[0] == 0x00 && buf[1] == 0x00 && data->pen_down) { + data->pen_up_count++; + if (data->pen_up_count == 6) { + data->pen_down = false; + goto sync; + } + return true; + } + + if (buf[0] == 0x01 && buf[1] == 0x08) { + touchscreen_set_mt_pos(&pos, &data->prop, + get_unaligned_le16(&coord[SILEAD_POINT_X_OFF]) & 0xfff, + get_unaligned_le16(&coord[SILEAD_POINT_Y_OFF]) & 0xfff); + + input_report_abs(data->pen_input, ABS_X, pos.x); + input_report_abs(data->pen_input, ABS_Y, pos.y); + + data->pen_up_count = 0; + data->pen_down = true; + goto sync; + } + + return false; + +sync: + input_report_key(data->pen_input, BTN_TOOL_PEN, data->pen_down); + input_report_key(data->pen_input, BTN_TOUCH, data->pen_down); + input_sync(data->pen_input); + return true; +} + +static void silead_ts_read_data(struct i2c_client *client) +{ + struct silead_ts_data *data = i2c_get_clientdata(client); + struct input_dev *input = data->input; + struct device *dev = &client->dev; + u8 *bufp, buf[SILEAD_TS_DATA_LEN]; + int touch_nr, softbutton, error, i; + bool softbutton_pressed = false; + + error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_DATA, + SILEAD_TS_DATA_LEN, buf); + if (error < 0) { + dev_err(dev, "Data read error %d\n", error); + return; + } + + if (buf[0] > data->max_fingers) { + dev_warn(dev, "More touches reported then supported %d > %d\n", + buf[0], data->max_fingers); + buf[0] = data->max_fingers; + } + + if (silead_ts_handle_pen_data(data, buf)) + goto sync; /* Pen is down, release all previous touches */ + + touch_nr = 0; + bufp = buf + SILEAD_POINT_DATA_LEN; + for (i = 0; i < buf[0]; i++, bufp += SILEAD_POINT_DATA_LEN) { + softbutton = (bufp[SILEAD_POINT_Y_MSB_OFF] & + SILEAD_EXTRA_DATA_MASK) >> 4; + + if (softbutton) { + /* + * For now only respond to softbutton == 0x01, some + * tablets *without* a capacative button send 0x04 + * when crossing the edges of the screen. + */ + if (softbutton == 0x01) + softbutton_pressed = true; + + continue; + } + + /* + * Bits 4-7 are the touch id, note not all models have + * hardware touch ids so atm we don't use these. + */ + data->id[touch_nr] = (bufp[SILEAD_POINT_X_MSB_OFF] & + SILEAD_EXTRA_DATA_MASK) >> 4; + touchscreen_set_mt_pos(&data->pos[touch_nr], &data->prop, + get_unaligned_le16(&bufp[SILEAD_POINT_X_OFF]) & 0xfff, + get_unaligned_le16(&bufp[SILEAD_POINT_Y_OFF]) & 0xfff); + touch_nr++; + } + + input_mt_assign_slots(input, data->slots, data->pos, touch_nr, 0); + + for (i = 0; i < touch_nr; i++) { + input_mt_slot(input, data->slots[i]); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, data->pos[i].x); + input_report_abs(input, ABS_MT_POSITION_Y, data->pos[i].y); + + dev_dbg(dev, "x=%d y=%d hw_id=%d sw_id=%d\n", data->pos[i].x, + data->pos[i].y, data->id[i], data->slots[i]); + } + +sync: + input_mt_sync_frame(input); + input_report_key(input, KEY_LEFTMETA, softbutton_pressed); + input_sync(input); +} + +static int silead_ts_init(struct i2c_client *client) +{ + struct silead_ts_data *data = i2c_get_clientdata(client); + int error; + + error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, + SILEAD_CMD_RESET); + if (error) + goto i2c_write_err; + usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); + + error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR, + data->max_fingers); + if (error) + goto i2c_write_err; + usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); + + error = i2c_smbus_write_byte_data(client, SILEAD_REG_CLOCK, + SILEAD_CLOCK); + if (error) + goto i2c_write_err; + usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); + + error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, + SILEAD_CMD_START); + if (error) + goto i2c_write_err; + usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); + + return 0; + +i2c_write_err: + dev_err(&client->dev, "Registers clear error %d\n", error); + return error; +} + +static int silead_ts_reset(struct i2c_client *client) +{ + int error; + + error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, + SILEAD_CMD_RESET); + if (error) + goto i2c_write_err; + usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); + + error = i2c_smbus_write_byte_data(client, SILEAD_REG_CLOCK, + SILEAD_CLOCK); + if (error) + goto i2c_write_err; + usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); + + error = i2c_smbus_write_byte_data(client, SILEAD_REG_POWER, + SILEAD_CMD_START); + if (error) + goto i2c_write_err; + usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); + + return 0; + +i2c_write_err: + dev_err(&client->dev, "Chip reset error %d\n", error); + return error; +} + +static int silead_ts_startup(struct i2c_client *client) +{ + int error; + + error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, 0x00); + if (error) { + dev_err(&client->dev, "Startup error %d\n", error); + return error; + } + + msleep(SILEAD_STARTUP_SLEEP); + + return 0; +} + +static int silead_ts_load_fw(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct silead_ts_data *data = i2c_get_clientdata(client); + const struct firmware *fw = NULL; + struct silead_fw_data *fw_data; + unsigned int fw_size, i; + int error; + + dev_dbg(dev, "Firmware file name: %s", data->fw_name); + + /* + * Unfortunately, at the time of writing this comment, we have been unable to + * get permission from Silead, or from device OEMs, to distribute the necessary + * Silead firmware files in linux-firmware. + * + * On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, + * which contains an embedded copy of the firmware. The fw-loader code has a + * "platform" fallback mechanism, which together with info on the firmware + * from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the + * UEFI driver when the firmware is missing from /lib/firmware. This makes the + * touchscreen work OOTB without users needing to manually download the firmware. + * + * The firmware bundled with the original Windows/Android is usually newer then + * the firmware in the UEFI driver and it is better calibrated. This better + * calibration can lead to significant differences in the reported min/max + * coordinates. + * + * To deal with this we first try to load the firmware without "platform" + * fallback. If that fails we retry with "platform" fallback and if that + * succeeds we apply an (optional) set of alternative min/max values from the + * "silead,efi-fw-min-max" property. + */ + error = firmware_request_nowarn(&fw, data->fw_name, dev); + if (error) { + error = firmware_request_platform(&fw, data->fw_name, dev); + if (error) { + dev_err(dev, "Firmware request error %d\n", error); + return error; + } + + error = device_property_read_u32_array(dev, "silead,efi-fw-min-max", + data->efi_fw_min_max, + ARRAY_SIZE(data->efi_fw_min_max)); + if (!error) + data->efi_fw_min_max_set = true; + + /* The EFI (platform) embedded fw does not have pen support */ + if (data->pen_supported) { + dev_warn(dev, "Warning loading '%s' from filesystem failed, using EFI embedded copy.\n", + data->fw_name); + dev_warn(dev, "Warning pen support is known to be broken in the EFI embedded fw version\n"); + data->pen_supported = false; + } + } + + fw_size = fw->size / sizeof(*fw_data); + fw_data = (struct silead_fw_data *)fw->data; + + for (i = 0; i < fw_size; i++) { + error = i2c_smbus_write_i2c_block_data(client, + fw_data[i].offset, + 4, + (u8 *)&fw_data[i].val); + if (error) { + dev_err(dev, "Firmware load error %d\n", error); + break; + } + } + + release_firmware(fw); + return error ?: 0; +} + +static u32 silead_ts_get_status(struct i2c_client *client) +{ + int error; + __le32 status; + + error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_STATUS, + sizeof(status), (u8 *)&status); + if (error < 0) { + dev_err(&client->dev, "Status read error %d\n", error); + return error; + } + + return le32_to_cpu(status); +} + +static int silead_ts_get_id(struct i2c_client *client) +{ + struct silead_ts_data *data = i2c_get_clientdata(client); + __le32 chip_id; + int error; + + error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_ID, + sizeof(chip_id), (u8 *)&chip_id); + if (error < 0) + return error; + + data->chip_id = le32_to_cpu(chip_id); + dev_info(&client->dev, "Silead chip ID: 0x%8X", data->chip_id); + + return 0; +} + +static int silead_ts_setup(struct i2c_client *client) +{ + int error; + u32 status; + + /* + * Some buggy BIOS-es bring up the chip in a stuck state where it + * blocks the I2C bus. The following steps are necessary to + * unstuck the chip / bus: + * 1. Turn off the Silead chip. + * 2. Try to do an I2C transfer with the chip, this will fail in + * response to which the I2C-bus-driver will call: + * i2c_recover_bus() which will unstuck the I2C-bus. Note the + * unstuck-ing of the I2C bus only works if we first drop the + * chip off the bus by turning it off. + * 3. Turn the chip back on. + * + * On the x86/ACPI systems were this problem is seen, step 1. and + * 3. require making ACPI calls and dealing with ACPI Power + * Resources. The workaround below runtime-suspends the chip to + * turn it off, leaving it up to the ACPI subsystem to deal with + * this. + */ + + if (device_property_read_bool(&client->dev, + "silead,stuck-controller-bug")) { + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + pm_runtime_allow(&client->dev); + + pm_runtime_suspend(&client->dev); + + dev_warn(&client->dev, FW_BUG "Stuck I2C bus: please ignore the next 'controller timed out' error\n"); + silead_ts_get_id(client); + + /* The forbid will also resume the device */ + pm_runtime_forbid(&client->dev); + pm_runtime_disable(&client->dev); + } + + silead_ts_set_power(client, SILEAD_POWER_OFF); + silead_ts_set_power(client, SILEAD_POWER_ON); + + error = silead_ts_get_id(client); + if (error) { + dev_err(&client->dev, "Chip ID read error %d\n", error); + return error; + } + + error = silead_ts_init(client); + if (error) + return error; + + error = silead_ts_reset(client); + if (error) + return error; + + error = silead_ts_load_fw(client); + if (error) + return error; + + error = silead_ts_startup(client); + if (error) + return error; + + status = silead_ts_get_status(client); + if (status != SILEAD_STATUS_OK) { + dev_err(&client->dev, + "Initialization error, status: 0x%X\n", status); + return -ENODEV; + } + + return 0; +} + +static irqreturn_t silead_ts_threaded_irq_handler(int irq, void *id) +{ + struct silead_ts_data *data = id; + struct i2c_client *client = data->client; + + silead_ts_read_data(client); + + return IRQ_HANDLED; +} + +static void silead_ts_read_props(struct i2c_client *client) +{ + struct silead_ts_data *data = i2c_get_clientdata(client); + struct device *dev = &client->dev; + const char *str; + int error; + + error = device_property_read_u32(dev, "silead,max-fingers", + &data->max_fingers); + if (error) { + dev_dbg(dev, "Max fingers read error %d\n", error); + data->max_fingers = 5; /* Most devices handle up-to 5 fingers */ + } + + error = device_property_read_string(dev, "firmware-name", &str); + if (!error) + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s", str); + else + dev_dbg(dev, "Firmware file name read error. Using default."); + + data->pen_supported = device_property_read_bool(dev, "silead,pen-supported"); + device_property_read_u32(dev, "silead,pen-resolution-x", &data->pen_x_res); + device_property_read_u32(dev, "silead,pen-resolution-y", &data->pen_y_res); +} + +#ifdef CONFIG_ACPI +static int silead_ts_set_default_fw_name(struct silead_ts_data *data, + const struct i2c_device_id *id) +{ + const struct acpi_device_id *acpi_id; + struct device *dev = &data->client->dev; + int i; + + if (ACPI_HANDLE(dev)) { + acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!acpi_id) + return -ENODEV; + + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", acpi_id->id); + + for (i = 0; i < strlen(data->fw_name); i++) + data->fw_name[i] = tolower(data->fw_name[i]); + } else { + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", id->name); + } + + return 0; +} +#else +static int silead_ts_set_default_fw_name(struct silead_ts_data *data, + const struct i2c_device_id *id) +{ + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", id->name); + return 0; +} +#endif + +static void silead_disable_regulator(void *arg) +{ + struct silead_ts_data *data = arg; + + regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); +} + +static int silead_ts_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + struct silead_ts_data *data; + struct device *dev = &client->dev; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_I2C | + I2C_FUNC_SMBUS_READ_I2C_BLOCK | + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { + dev_err(dev, "I2C functionality check failed\n"); + return -ENXIO; + } + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + data->client = client; + + error = silead_ts_set_default_fw_name(data, id); + if (error) + return error; + + silead_ts_read_props(client); + + /* We must have the IRQ provided by DT or ACPI subsystem */ + if (client->irq <= 0) + return -ENODEV; + + data->regulators[0].supply = "vddio"; + data->regulators[1].supply = "avdd"; + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), + data->regulators); + if (error) + return error; + + /* + * Enable regulators at probe and disable them at remove, we need + * to keep the chip powered otherwise it forgets its firmware. + */ + error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), + data->regulators); + if (error) + return error; + + error = devm_add_action_or_reset(dev, silead_disable_regulator, data); + if (error) + return error; + + /* Power GPIO pin */ + data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); + if (IS_ERR(data->gpio_power)) + return dev_err_probe(dev, PTR_ERR(data->gpio_power), + "Shutdown GPIO request failed\n"); + + error = silead_ts_setup(client); + if (error) + return error; + + error = silead_ts_request_input_dev(data); + if (error) + return error; + + error = silead_ts_request_pen_input_dev(data); + if (error) + return error; + + error = devm_request_threaded_irq(dev, client->irq, + NULL, silead_ts_threaded_irq_handler, + IRQF_ONESHOT, client->name, data); + if (error) { + if (error != -EPROBE_DEFER) + dev_err(dev, "IRQ request failed %d\n", error); + return error; + } + + return 0; +} + +static int silead_ts_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + disable_irq(client->irq); + silead_ts_set_power(client, SILEAD_POWER_OFF); + return 0; +} + +static int silead_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + bool second_try = false; + int error, status; + + silead_ts_set_power(client, SILEAD_POWER_ON); + + retry: + error = silead_ts_reset(client); + if (error) + return error; + + if (second_try) { + error = silead_ts_load_fw(client); + if (error) + return error; + } + + error = silead_ts_startup(client); + if (error) + return error; + + status = silead_ts_get_status(client); + if (status != SILEAD_STATUS_OK) { + if (!second_try) { + second_try = true; + dev_dbg(dev, "Reloading firmware after unsuccessful resume\n"); + goto retry; + } + dev_err(dev, "Resume error, status: 0x%02x\n", status); + return -ENODEV; + } + + enable_irq(client->irq); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(silead_ts_pm, silead_ts_suspend, silead_ts_resume); + +static const struct i2c_device_id silead_ts_id[] = { + { "gsl1680", 0 }, + { "gsl1688", 0 }, + { "gsl3670", 0 }, + { "gsl3675", 0 }, + { "gsl3692", 0 }, + { "mssl1680", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, silead_ts_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id silead_ts_acpi_match[] = { + { "GSL1680", 0 }, + { "GSL1688", 0 }, + { "GSL3670", 0 }, + { "GSL3675", 0 }, + { "GSL3692", 0 }, + { "MSSL1680", 0 }, + { "MSSL0001", 0 }, + { "MSSL0002", 0 }, + { "MSSL0017", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id silead_ts_of_match[] = { + { .compatible = "silead,gsl1680" }, + { .compatible = "silead,gsl1688" }, + { .compatible = "silead,gsl3670" }, + { .compatible = "silead,gsl3675" }, + { .compatible = "silead,gsl3692" }, + { }, +}; +MODULE_DEVICE_TABLE(of, silead_ts_of_match); +#endif + +static struct i2c_driver silead_ts_driver = { + .probe = silead_ts_probe, + .id_table = silead_ts_id, + .driver = { + .name = SILEAD_TS_NAME, + .acpi_match_table = ACPI_PTR(silead_ts_acpi_match), + .of_match_table = of_match_ptr(silead_ts_of_match), + .pm = pm_sleep_ptr(&silead_ts_pm), + }, +}; +module_i2c_driver(silead_ts_driver); + +MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>"); +MODULE_DESCRIPTION("Silead I2C touchscreen driver"); +MODULE_LICENSE("GPL"); |