summaryrefslogtreecommitdiffstats
path: root/drivers/leds/trigger
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/leds/trigger')
-rw-r--r--drivers/leds/trigger/Kconfig158
-rw-r--r--drivers/leds/trigger/Makefile18
-rw-r--r--drivers/leds/trigger/ledtrig-activity.c270
-rw-r--r--drivers/leds/trigger/ledtrig-audio.c65
-rw-r--r--drivers/leds/trigger/ledtrig-backlight.c142
-rw-r--r--drivers/leds/trigger/ledtrig-camera.c53
-rw-r--r--drivers/leds/trigger/ledtrig-cpu.c172
-rw-r--r--drivers/leds/trigger/ledtrig-default-on.c30
-rw-r--r--drivers/leds/trigger/ledtrig-disk.c40
-rw-r--r--drivers/leds/trigger/ledtrig-gpio.c202
-rw-r--r--drivers/leds/trigger/ledtrig-heartbeat.c213
-rw-r--r--drivers/leds/trigger/ledtrig-mtd.c37
-rw-r--r--drivers/leds/trigger/ledtrig-netdev.c620
-rw-r--r--drivers/leds/trigger/ledtrig-oneshot.c200
-rw-r--r--drivers/leds/trigger/ledtrig-panic.c74
-rw-r--r--drivers/leds/trigger/ledtrig-pattern.c463
-rw-r--r--drivers/leds/trigger/ledtrig-timer.c140
-rw-r--r--drivers/leds/trigger/ledtrig-transient.c198
-rw-r--r--drivers/leds/trigger/ledtrig-tty.c188
19 files changed, 3283 insertions, 0 deletions
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
new file mode 100644
index 0000000000..2a57328eca
--- /dev/null
+++ b/drivers/leds/trigger/Kconfig
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig LEDS_TRIGGERS
+ bool "LED Trigger support"
+ depends on LEDS_CLASS
+ help
+ This option enables trigger support for the leds class.
+ These triggers allow kernel events to drive the LEDs and can
+ be configured via sysfs. If unsure, say Y.
+
+if LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TIMER
+ tristate "LED Timer Trigger"
+ help
+ This allows LEDs to be controlled by a programmable timer
+ via sysfs. Some LED hardware can be programmed to start
+ blinking the LED without any further software interaction.
+ For more details read Documentation/leds/leds-class.rst.
+
+ If unsure, say Y.
+
+config LEDS_TRIGGER_ONESHOT
+ tristate "LED One-shot Trigger"
+ help
+ This allows LEDs to blink in one-shot pulses with parameters
+ controlled via sysfs. It's useful to notify the user on
+ sporadic events, when there are no clear begin and end trap points,
+ or on dense events, where this blinks the LED at constant rate if
+ rearmed continuously.
+
+ It also shows how to use the led_blink_set_oneshot() function.
+
+ If unsure, say Y.
+
+config LEDS_TRIGGER_DISK
+ bool "LED Disk Trigger"
+ depends on ATA
+ help
+ This allows LEDs to be controlled by disk activity.
+ If unsure, say Y.
+
+config LEDS_TRIGGER_MTD
+ bool "LED MTD (NAND/NOR) Trigger"
+ depends on MTD
+ help
+ This allows LEDs to be controlled by MTD activity.
+ If unsure, say N.
+
+config LEDS_TRIGGER_HEARTBEAT
+ tristate "LED Heartbeat Trigger"
+ help
+ This allows LEDs to be controlled by a CPU load average.
+ The flash frequency is a hyperbolic function of the 1-minute
+ load average.
+ If unsure, say Y.
+
+config LEDS_TRIGGER_BACKLIGHT
+ tristate "LED backlight Trigger"
+ help
+ This allows LEDs to be controlled as a backlight device: they
+ turn off and on when the display is blanked and unblanked.
+
+ If unsure, say N.
+
+config LEDS_TRIGGER_CPU
+ bool "LED CPU Trigger"
+ depends on !PREEMPT_RT
+ help
+ This allows LEDs to be controlled by active CPUs. This shows
+ the active CPUs across an array of LEDs so you can see which
+ CPUs are active on the system at any given moment.
+
+ If unsure, say N.
+
+config LEDS_TRIGGER_ACTIVITY
+ tristate "LED activity Trigger"
+ help
+ This allows LEDs to be controlled by an immediate CPU usage.
+ The flash frequency and duty cycle varies from faint flashes to
+ intense brightness depending on the instant CPU load.
+ If unsure, say N.
+
+config LEDS_TRIGGER_GPIO
+ tristate "LED GPIO Trigger"
+ depends on GPIOLIB || COMPILE_TEST
+ depends on BROKEN
+ help
+ This allows LEDs to be controlled by gpio events. It's good
+ when using gpios as switches and triggering the needed LEDs
+ from there. One use case is n810's keypad LEDs that could
+ be triggered by this trigger when user slides up to show
+ keypad.
+
+ If unsure, say N.
+
+config LEDS_TRIGGER_DEFAULT_ON
+ tristate "LED Default ON Trigger"
+ help
+ This allows LEDs to be initialised in the ON state.
+ If unsure, say Y.
+
+comment "iptables trigger is under Netfilter config (LED target)"
+ depends on LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TRANSIENT
+ tristate "LED Transient Trigger"
+ help
+ This allows one time activation of a transient state on
+ GPIO/PWM based hardware.
+ If unsure, say Y.
+
+config LEDS_TRIGGER_CAMERA
+ tristate "LED Camera Flash/Torch Trigger"
+ help
+ This allows LEDs to be controlled as a camera flash/torch device.
+ This enables direct flash/torch on/off by the driver, kernel space.
+ If unsure, say Y.
+
+config LEDS_TRIGGER_PANIC
+ bool "LED Panic Trigger"
+ help
+ This allows LEDs to be configured to blink on a kernel panic.
+ Enabling this option will allow to mark certain LEDs as panic indicators,
+ allowing to blink them on a kernel panic, even if they are set to
+ a different trigger.
+ If unsure, say Y.
+
+config LEDS_TRIGGER_NETDEV
+ tristate "LED Netdev Trigger"
+ depends on NET
+ help
+ This allows LEDs to be controlled by network device activity.
+ If unsure, say Y.
+
+config LEDS_TRIGGER_PATTERN
+ tristate "LED Pattern Trigger"
+ help
+ This allows LEDs to be controlled by a software or hardware pattern
+ which is a series of tuples, of brightness and duration (ms).
+ If unsure, say N
+
+config LEDS_TRIGGER_AUDIO
+ tristate "Audio Mute LED Trigger"
+ help
+ This allows LEDs to be controlled by audio drivers for following
+ the audio mute and mic-mute changes.
+ If unsure, say N
+
+config LEDS_TRIGGER_TTY
+ tristate "LED Trigger for TTY devices"
+ depends on TTY
+ help
+ This allows LEDs to be controlled by activity on ttys which includes
+ serial devices like /dev/ttyS0.
+
+ When build as a module this driver will be called ledtrig-tty.
+
+endif # LEDS_TRIGGERS
diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
new file mode 100644
index 0000000000..25c4db97cd
--- /dev/null
+++ b/drivers/leds/trigger/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_ONESHOT) += ledtrig-oneshot.o
+obj-$(CONFIG_LEDS_TRIGGER_DISK) += ledtrig-disk.o
+obj-$(CONFIG_LEDS_TRIGGER_MTD) += ledtrig-mtd.o
+obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
+obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
+obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
+obj-$(CONFIG_LEDS_TRIGGER_ACTIVITY) += ledtrig-activity.o
+obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
+obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
+obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o
+obj-$(CONFIG_LEDS_TRIGGER_PANIC) += ledtrig-panic.o
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
+obj-$(CONFIG_LEDS_TRIGGER_PATTERN) += ledtrig-pattern.o
+obj-$(CONFIG_LEDS_TRIGGER_AUDIO) += ledtrig-audio.o
+obj-$(CONFIG_LEDS_TRIGGER_TTY) += ledtrig-tty.o
diff --git a/drivers/leds/trigger/ledtrig-activity.c b/drivers/leds/trigger/ledtrig-activity.c
new file mode 100644
index 0000000000..33cbf84136
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-activity.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Activity LED trigger
+ *
+ * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
+ * Partially based on Atsushi Nemoto's ledtrig-heartbeat.c.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/panic_notifier.h>
+#include <linux/reboot.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include "../leds.h"
+
+static int panic_detected;
+
+struct activity_data {
+ struct timer_list timer;
+ struct led_classdev *led_cdev;
+ u64 last_used;
+ u64 last_boot;
+ int time_left;
+ int state;
+ int invert;
+};
+
+static void led_activity_function(struct timer_list *t)
+{
+ struct activity_data *activity_data = from_timer(activity_data, t,
+ timer);
+ struct led_classdev *led_cdev = activity_data->led_cdev;
+ unsigned int target;
+ unsigned int usage;
+ int delay;
+ u64 curr_used;
+ u64 curr_boot;
+ s32 diff_used;
+ s32 diff_boot;
+ int cpus;
+ int i;
+
+ if (test_and_clear_bit(LED_BLINK_BRIGHTNESS_CHANGE, &led_cdev->work_flags))
+ led_cdev->blink_brightness = led_cdev->new_blink_brightness;
+
+ if (unlikely(panic_detected)) {
+ /* full brightness in case of panic */
+ led_set_brightness_nosleep(led_cdev, led_cdev->blink_brightness);
+ return;
+ }
+
+ cpus = 0;
+ curr_used = 0;
+
+ for_each_possible_cpu(i) {
+ struct kernel_cpustat kcpustat;
+
+ kcpustat_cpu_fetch(&kcpustat, i);
+
+ curr_used += kcpustat.cpustat[CPUTIME_USER]
+ + kcpustat.cpustat[CPUTIME_NICE]
+ + kcpustat.cpustat[CPUTIME_SYSTEM]
+ + kcpustat.cpustat[CPUTIME_SOFTIRQ]
+ + kcpustat.cpustat[CPUTIME_IRQ];
+ cpus++;
+ }
+
+ /* We come here every 100ms in the worst case, so that's 100M ns of
+ * cumulated time. By dividing by 2^16, we get the time resolution
+ * down to 16us, ensuring we won't overflow 32-bit computations below
+ * even up to 3k CPUs, while keeping divides cheap on smaller systems.
+ */
+ curr_boot = ktime_get_boottime_ns() * cpus;
+ diff_boot = (curr_boot - activity_data->last_boot) >> 16;
+ diff_used = (curr_used - activity_data->last_used) >> 16;
+ activity_data->last_boot = curr_boot;
+ activity_data->last_used = curr_used;
+
+ if (diff_boot <= 0 || diff_used < 0)
+ usage = 0;
+ else if (diff_used >= diff_boot)
+ usage = 100;
+ else
+ usage = 100 * diff_used / diff_boot;
+
+ /*
+ * Now we know the total boot_time multiplied by the number of CPUs, and
+ * the total idle+wait time for all CPUs. We'll compare how they evolved
+ * since last call. The % of overall CPU usage is :
+ *
+ * 1 - delta_idle / delta_boot
+ *
+ * What we want is that when the CPU usage is zero, the LED must blink
+ * slowly with very faint flashes that are detectable but not disturbing
+ * (typically 10ms every second, or 10ms ON, 990ms OFF). Then we want
+ * blinking frequency to increase up to the point where the load is
+ * enough to saturate one core in multi-core systems or 50% in single
+ * core systems. At this point it should reach 10 Hz with a 10/90 duty
+ * cycle (10ms ON, 90ms OFF). After this point, the blinking frequency
+ * remains stable (10 Hz) and only the duty cycle increases to report
+ * the activity, up to the point where we have 90ms ON, 10ms OFF when
+ * all cores are saturated. It's important that the LED never stays in
+ * a steady state so that it's easy to distinguish an idle or saturated
+ * machine from a hung one.
+ *
+ * This gives us :
+ * - a target CPU usage of min(50%, 100%/#CPU) for a 10% duty cycle
+ * (10ms ON, 90ms OFF)
+ * - below target :
+ * ON_ms = 10
+ * OFF_ms = 90 + (1 - usage/target) * 900
+ * - above target :
+ * ON_ms = 10 + (usage-target)/(100%-target) * 80
+ * OFF_ms = 90 - (usage-target)/(100%-target) * 80
+ *
+ * In order to keep a good responsiveness, we cap the sleep time to
+ * 100 ms and keep track of the sleep time left. This allows us to
+ * quickly change it if needed.
+ */
+
+ activity_data->time_left -= 100;
+ if (activity_data->time_left <= 0) {
+ activity_data->time_left = 0;
+ activity_data->state = !activity_data->state;
+ led_set_brightness_nosleep(led_cdev,
+ (activity_data->state ^ activity_data->invert) ?
+ led_cdev->blink_brightness : LED_OFF);
+ }
+
+ target = (cpus > 1) ? (100 / cpus) : 50;
+
+ if (usage < target)
+ delay = activity_data->state ?
+ 10 : /* ON */
+ 990 - 900 * usage / target; /* OFF */
+ else
+ delay = activity_data->state ?
+ 10 + 80 * (usage - target) / (100 - target) : /* ON */
+ 90 - 80 * (usage - target) / (100 - target); /* OFF */
+
+
+ if (!activity_data->time_left || delay <= activity_data->time_left)
+ activity_data->time_left = delay;
+
+ delay = min_t(int, activity_data->time_left, 100);
+ mod_timer(&activity_data->timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static ssize_t led_invert_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct activity_data *activity_data = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", activity_data->invert);
+}
+
+static ssize_t led_invert_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct activity_data *activity_data = led_trigger_get_drvdata(dev);
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ activity_data->invert = !!state;
+
+ return size;
+}
+
+static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
+
+static struct attribute *activity_led_attrs[] = {
+ &dev_attr_invert.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(activity_led);
+
+static int activity_activate(struct led_classdev *led_cdev)
+{
+ struct activity_data *activity_data;
+
+ activity_data = kzalloc(sizeof(*activity_data), GFP_KERNEL);
+ if (!activity_data)
+ return -ENOMEM;
+
+ led_set_trigger_data(led_cdev, activity_data);
+
+ activity_data->led_cdev = led_cdev;
+ timer_setup(&activity_data->timer, led_activity_function, 0);
+ if (!led_cdev->blink_brightness)
+ led_cdev->blink_brightness = led_cdev->max_brightness;
+ led_activity_function(&activity_data->timer);
+ set_bit(LED_BLINK_SW, &led_cdev->work_flags);
+
+ return 0;
+}
+
+static void activity_deactivate(struct led_classdev *led_cdev)
+{
+ struct activity_data *activity_data = led_get_trigger_data(led_cdev);
+
+ timer_shutdown_sync(&activity_data->timer);
+ kfree(activity_data);
+ clear_bit(LED_BLINK_SW, &led_cdev->work_flags);
+}
+
+static struct led_trigger activity_led_trigger = {
+ .name = "activity",
+ .activate = activity_activate,
+ .deactivate = activity_deactivate,
+ .groups = activity_led_groups,
+};
+
+static int activity_reboot_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ led_trigger_unregister(&activity_led_trigger);
+ return NOTIFY_DONE;
+}
+
+static int activity_panic_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ panic_detected = 1;
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block activity_reboot_nb = {
+ .notifier_call = activity_reboot_notifier,
+};
+
+static struct notifier_block activity_panic_nb = {
+ .notifier_call = activity_panic_notifier,
+};
+
+static int __init activity_init(void)
+{
+ int rc = led_trigger_register(&activity_led_trigger);
+
+ if (!rc) {
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &activity_panic_nb);
+ register_reboot_notifier(&activity_reboot_nb);
+ }
+ return rc;
+}
+
+static void __exit activity_exit(void)
+{
+ unregister_reboot_notifier(&activity_reboot_nb);
+ atomic_notifier_chain_unregister(&panic_notifier_list,
+ &activity_panic_nb);
+ led_trigger_unregister(&activity_led_trigger);
+}
+
+module_init(activity_init);
+module_exit(activity_exit);
+
+MODULE_AUTHOR("Willy Tarreau <w@1wt.eu>");
+MODULE_DESCRIPTION("Activity LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-audio.c b/drivers/leds/trigger/ledtrig-audio.c
new file mode 100644
index 0000000000..c6b437e636
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-audio.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Audio Mute LED trigger
+//
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include "../leds.h"
+
+static enum led_brightness audio_state[NUM_AUDIO_LEDS];
+
+static int ledtrig_audio_mute_activate(struct led_classdev *led_cdev)
+{
+ led_set_brightness_nosleep(led_cdev, audio_state[LED_AUDIO_MUTE]);
+ return 0;
+}
+
+static int ledtrig_audio_micmute_activate(struct led_classdev *led_cdev)
+{
+ led_set_brightness_nosleep(led_cdev, audio_state[LED_AUDIO_MICMUTE]);
+ return 0;
+}
+
+static struct led_trigger ledtrig_audio[NUM_AUDIO_LEDS] = {
+ [LED_AUDIO_MUTE] = {
+ .name = "audio-mute",
+ .activate = ledtrig_audio_mute_activate,
+ },
+ [LED_AUDIO_MICMUTE] = {
+ .name = "audio-micmute",
+ .activate = ledtrig_audio_micmute_activate,
+ },
+};
+
+enum led_brightness ledtrig_audio_get(enum led_audio type)
+{
+ return audio_state[type];
+}
+EXPORT_SYMBOL_GPL(ledtrig_audio_get);
+
+void ledtrig_audio_set(enum led_audio type, enum led_brightness state)
+{
+ audio_state[type] = state;
+ led_trigger_event(&ledtrig_audio[type], state);
+}
+EXPORT_SYMBOL_GPL(ledtrig_audio_set);
+
+static int __init ledtrig_audio_init(void)
+{
+ led_trigger_register(&ledtrig_audio[LED_AUDIO_MUTE]);
+ led_trigger_register(&ledtrig_audio[LED_AUDIO_MICMUTE]);
+ return 0;
+}
+module_init(ledtrig_audio_init);
+
+static void __exit ledtrig_audio_exit(void)
+{
+ led_trigger_unregister(&ledtrig_audio[LED_AUDIO_MUTE]);
+ led_trigger_unregister(&ledtrig_audio[LED_AUDIO_MICMUTE]);
+}
+module_exit(ledtrig_audio_exit);
+
+MODULE_DESCRIPTION("LED trigger for audio mute control");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-backlight.c b/drivers/leds/trigger/ledtrig-backlight.c
new file mode 100644
index 0000000000..487577d22c
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-backlight.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Backlight emulation LED trigger
+ *
+ * Copyright 2008 (C) Rodolfo Giometti <giometti@linux.it>
+ * Copyright 2008 (C) Eurotech S.p.A. <info@eurotech.it>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+#define BLANK 1
+#define UNBLANK 0
+
+struct bl_trig_notifier {
+ struct led_classdev *led;
+ int brightness;
+ int old_status;
+ struct notifier_block notifier;
+ unsigned invert;
+};
+
+static int fb_notifier_callback(struct notifier_block *p,
+ unsigned long event, void *data)
+{
+ struct bl_trig_notifier *n = container_of(p,
+ struct bl_trig_notifier, notifier);
+ struct led_classdev *led = n->led;
+ struct fb_event *fb_event = data;
+ int *blank;
+ int new_status;
+
+ /* If we aren't interested in this event, skip it immediately ... */
+ if (event != FB_EVENT_BLANK)
+ return 0;
+
+ blank = fb_event->data;
+ new_status = *blank ? BLANK : UNBLANK;
+
+ if (new_status == n->old_status)
+ return 0;
+
+ if ((n->old_status == UNBLANK) ^ n->invert) {
+ n->brightness = led->brightness;
+ led_set_brightness_nosleep(led, LED_OFF);
+ } else {
+ led_set_brightness_nosleep(led, n->brightness);
+ }
+
+ n->old_status = new_status;
+
+ return 0;
+}
+
+static ssize_t bl_trig_invert_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bl_trig_notifier *n = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", n->invert);
+}
+
+static ssize_t bl_trig_invert_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t num)
+{
+ struct led_classdev *led = led_trigger_get_led(dev);
+ struct bl_trig_notifier *n = led_trigger_get_drvdata(dev);
+ unsigned long invert;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &invert);
+ if (ret < 0)
+ return ret;
+
+ if (invert > 1)
+ return -EINVAL;
+
+ n->invert = invert;
+
+ /* After inverting, we need to update the LED. */
+ if ((n->old_status == BLANK) ^ n->invert)
+ led_set_brightness_nosleep(led, LED_OFF);
+ else
+ led_set_brightness_nosleep(led, n->brightness);
+
+ return num;
+}
+static DEVICE_ATTR(inverted, 0644, bl_trig_invert_show, bl_trig_invert_store);
+
+static struct attribute *bl_trig_attrs[] = {
+ &dev_attr_inverted.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(bl_trig);
+
+static int bl_trig_activate(struct led_classdev *led)
+{
+ int ret;
+
+ struct bl_trig_notifier *n;
+
+ n = kzalloc(sizeof(struct bl_trig_notifier), GFP_KERNEL);
+ if (!n)
+ return -ENOMEM;
+ led_set_trigger_data(led, n);
+
+ n->led = led;
+ n->brightness = led->brightness;
+ n->old_status = UNBLANK;
+ n->notifier.notifier_call = fb_notifier_callback;
+
+ ret = fb_register_client(&n->notifier);
+ if (ret)
+ dev_err(led->dev, "unable to register backlight trigger\n");
+
+ return 0;
+}
+
+static void bl_trig_deactivate(struct led_classdev *led)
+{
+ struct bl_trig_notifier *n = led_get_trigger_data(led);
+
+ fb_unregister_client(&n->notifier);
+ kfree(n);
+}
+
+static struct led_trigger bl_led_trigger = {
+ .name = "backlight",
+ .activate = bl_trig_activate,
+ .deactivate = bl_trig_deactivate,
+ .groups = bl_trig_groups,
+};
+module_led_trigger(bl_led_trigger);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("Backlight emulation LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-camera.c b/drivers/leds/trigger/ledtrig-camera.c
new file mode 100644
index 0000000000..ab1c410872
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-camera.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Camera Flash and Torch On/Off Trigger
+ *
+ * based on ledtrig-ide-disk.c
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+DEFINE_LED_TRIGGER(ledtrig_flash);
+DEFINE_LED_TRIGGER(ledtrig_torch);
+
+void ledtrig_flash_ctrl(bool on)
+{
+ enum led_brightness brt = on ? LED_FULL : LED_OFF;
+
+ led_trigger_event(ledtrig_flash, brt);
+}
+EXPORT_SYMBOL_GPL(ledtrig_flash_ctrl);
+
+void ledtrig_torch_ctrl(bool on)
+{
+ enum led_brightness brt = on ? LED_FULL : LED_OFF;
+
+ led_trigger_event(ledtrig_torch, brt);
+}
+EXPORT_SYMBOL_GPL(ledtrig_torch_ctrl);
+
+static int __init ledtrig_camera_init(void)
+{
+ led_trigger_register_simple("flash", &ledtrig_flash);
+ led_trigger_register_simple("torch", &ledtrig_torch);
+ return 0;
+}
+module_init(ledtrig_camera_init);
+
+static void __exit ledtrig_camera_exit(void)
+{
+ led_trigger_unregister_simple(ledtrig_torch);
+ led_trigger_unregister_simple(ledtrig_flash);
+}
+module_exit(ledtrig_camera_exit);
+
+MODULE_DESCRIPTION("LED Trigger for Camera Flash/Torch Control");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-cpu.c b/drivers/leds/trigger/ledtrig-cpu.c
new file mode 100644
index 0000000000..05848a2fec
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-cpu.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ledtrig-cpu.c - LED trigger based on CPU activity
+ *
+ * This LED trigger will be registered for first 8 CPUs and named
+ * as cpu0..cpu7. There's additional trigger called cpu that
+ * is on when any CPU is active.
+ *
+ * If you want support for arbitrary number of CPUs, make it one trigger,
+ * with additional sysfs file selecting which CPU to watch.
+ *
+ * It can be bound to any LED just like other triggers using either a
+ * board file or via sysfs interface.
+ *
+ * An API named ledtrig_cpu is exported for any user, who want to add CPU
+ * activity indication in their code.
+ *
+ * Copyright 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright 2011 - 2012 Bryan Wu <bryan.wu@canonical.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
+#include <linux/rwsem.h>
+#include <linux/cpu.h>
+#include "../leds.h"
+
+#define MAX_NAME_LEN 8
+
+struct led_trigger_cpu {
+ bool is_active;
+ char name[MAX_NAME_LEN];
+ struct led_trigger *_trig;
+};
+
+static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig);
+
+static struct led_trigger *trig_cpu_all;
+static atomic_t num_active_cpus = ATOMIC_INIT(0);
+
+/**
+ * ledtrig_cpu - emit a CPU event as a trigger
+ * @ledevt: CPU event to be emitted
+ *
+ * Emit a CPU event on a CPU core, which will trigger a
+ * bound LED to turn on or turn off.
+ */
+void ledtrig_cpu(enum cpu_led_event ledevt)
+{
+ struct led_trigger_cpu *trig = this_cpu_ptr(&cpu_trig);
+ bool is_active = trig->is_active;
+
+ /* Locate the correct CPU LED */
+ switch (ledevt) {
+ case CPU_LED_IDLE_END:
+ case CPU_LED_START:
+ /* Will turn the LED on, max brightness */
+ is_active = true;
+ break;
+
+ case CPU_LED_IDLE_START:
+ case CPU_LED_STOP:
+ case CPU_LED_HALTED:
+ /* Will turn the LED off */
+ is_active = false;
+ break;
+
+ default:
+ /* Will leave the LED as it is */
+ break;
+ }
+
+ if (is_active != trig->is_active) {
+ unsigned int active_cpus;
+ unsigned int total_cpus;
+
+ /* Update trigger state */
+ trig->is_active = is_active;
+ atomic_add(is_active ? 1 : -1, &num_active_cpus);
+ active_cpus = atomic_read(&num_active_cpus);
+ total_cpus = num_present_cpus();
+
+ led_trigger_event(trig->_trig,
+ is_active ? LED_FULL : LED_OFF);
+
+
+ led_trigger_event(trig_cpu_all,
+ DIV_ROUND_UP(LED_FULL * active_cpus, total_cpus));
+
+ }
+}
+EXPORT_SYMBOL(ledtrig_cpu);
+
+static int ledtrig_cpu_syscore_suspend(void)
+{
+ ledtrig_cpu(CPU_LED_STOP);
+ return 0;
+}
+
+static void ledtrig_cpu_syscore_resume(void)
+{
+ ledtrig_cpu(CPU_LED_START);
+}
+
+static void ledtrig_cpu_syscore_shutdown(void)
+{
+ ledtrig_cpu(CPU_LED_HALTED);
+}
+
+static struct syscore_ops ledtrig_cpu_syscore_ops = {
+ .shutdown = ledtrig_cpu_syscore_shutdown,
+ .suspend = ledtrig_cpu_syscore_suspend,
+ .resume = ledtrig_cpu_syscore_resume,
+};
+
+static int ledtrig_online_cpu(unsigned int cpu)
+{
+ ledtrig_cpu(CPU_LED_START);
+ return 0;
+}
+
+static int ledtrig_prepare_down_cpu(unsigned int cpu)
+{
+ ledtrig_cpu(CPU_LED_STOP);
+ return 0;
+}
+
+static int __init ledtrig_cpu_init(void)
+{
+ unsigned int cpu;
+ int ret;
+
+ /* Supports up to 9999 cpu cores */
+ BUILD_BUG_ON(CONFIG_NR_CPUS > 9999);
+
+ /*
+ * Registering a trigger for all CPUs.
+ */
+ led_trigger_register_simple("cpu", &trig_cpu_all);
+
+ /*
+ * Registering CPU led trigger for each CPU core here
+ * ignores CPU hotplug, but after this CPU hotplug works
+ * fine with this trigger.
+ */
+ for_each_possible_cpu(cpu) {
+ struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
+
+ if (cpu >= 8)
+ continue;
+
+ snprintf(trig->name, MAX_NAME_LEN, "cpu%u", cpu);
+
+ led_trigger_register_simple(trig->name, &trig->_trig);
+ }
+
+ register_syscore_ops(&ledtrig_cpu_syscore_ops);
+
+ ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "leds/trigger:starting",
+ ledtrig_online_cpu, ledtrig_prepare_down_cpu);
+ if (ret < 0)
+ pr_err("CPU hotplug notifier for ledtrig-cpu could not be registered: %d\n",
+ ret);
+
+ pr_info("ledtrig-cpu: registered to indicate activity on CPUs\n");
+
+ return 0;
+}
+device_initcall(ledtrig_cpu_init);
diff --git a/drivers/leds/trigger/ledtrig-default-on.c b/drivers/leds/trigger/ledtrig-default-on.c
new file mode 100644
index 0000000000..8207f85ece
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-default-on.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED Kernel Default ON Trigger
+ *
+ * Copyright 2008 Nick Forbes <nick.forbes@incepta.com>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+static int defon_trig_activate(struct led_classdev *led_cdev)
+{
+ led_set_brightness_nosleep(led_cdev, led_cdev->max_brightness);
+ return 0;
+}
+
+static struct led_trigger defon_led_trigger = {
+ .name = "default-on",
+ .activate = defon_trig_activate,
+};
+module_led_trigger(defon_led_trigger);
+
+MODULE_AUTHOR("Nick Forbes <nick.forbes@incepta.com>");
+MODULE_DESCRIPTION("Default-ON LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-disk.c b/drivers/leds/trigger/ledtrig-disk.c
new file mode 100644
index 0000000000..e9b87ee944
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-disk.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED Disk Activity Trigger
+ *
+ * Copyright 2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+#define BLINK_DELAY 30
+
+DEFINE_LED_TRIGGER(ledtrig_disk);
+DEFINE_LED_TRIGGER(ledtrig_disk_read);
+DEFINE_LED_TRIGGER(ledtrig_disk_write);
+
+void ledtrig_disk_activity(bool write)
+{
+ led_trigger_blink_oneshot(ledtrig_disk, BLINK_DELAY, BLINK_DELAY, 0);
+ if (write)
+ led_trigger_blink_oneshot(ledtrig_disk_write,
+ BLINK_DELAY, BLINK_DELAY, 0);
+ else
+ led_trigger_blink_oneshot(ledtrig_disk_read,
+ BLINK_DELAY, BLINK_DELAY, 0);
+}
+EXPORT_SYMBOL(ledtrig_disk_activity);
+
+static int __init ledtrig_disk_init(void)
+{
+ led_trigger_register_simple("disk-activity", &ledtrig_disk);
+ led_trigger_register_simple("disk-read", &ledtrig_disk_read);
+ led_trigger_register_simple("disk-write", &ledtrig_disk_write);
+
+ return 0;
+}
+device_initcall(ledtrig_disk_init);
diff --git a/drivers/leds/trigger/ledtrig-gpio.c b/drivers/leds/trigger/ledtrig-gpio.c
new file mode 100644
index 0000000000..0120faa3da
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-gpio.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ledtrig-gio.c - LED Trigger Based on GPIO events
+ *
+ * Copyright 2009 Felipe Balbi <me@felipebalbi.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include "../leds.h"
+
+struct gpio_trig_data {
+ struct led_classdev *led;
+
+ unsigned desired_brightness; /* desired brightness when led is on */
+ unsigned inverted; /* true when gpio is inverted */
+ unsigned gpio; /* gpio that triggers the leds */
+};
+
+static irqreturn_t gpio_trig_irq(int irq, void *_led)
+{
+ struct led_classdev *led = _led;
+ struct gpio_trig_data *gpio_data = led_get_trigger_data(led);
+ int tmp;
+
+ tmp = gpio_get_value_cansleep(gpio_data->gpio);
+ if (gpio_data->inverted)
+ tmp = !tmp;
+
+ if (tmp) {
+ if (gpio_data->desired_brightness)
+ led_set_brightness_nosleep(gpio_data->led,
+ gpio_data->desired_brightness);
+ else
+ led_set_brightness_nosleep(gpio_data->led, LED_FULL);
+ } else {
+ led_set_brightness_nosleep(gpio_data->led, LED_OFF);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static ssize_t gpio_trig_brightness_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", gpio_data->desired_brightness);
+}
+
+static ssize_t gpio_trig_brightness_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t n)
+{
+ struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
+ unsigned desired_brightness;
+ int ret;
+
+ ret = sscanf(buf, "%u", &desired_brightness);
+ if (ret < 1 || desired_brightness > 255) {
+ dev_err(dev, "invalid value\n");
+ return -EINVAL;
+ }
+
+ gpio_data->desired_brightness = desired_brightness;
+
+ return n;
+}
+static DEVICE_ATTR(desired_brightness, 0644, gpio_trig_brightness_show,
+ gpio_trig_brightness_store);
+
+static ssize_t gpio_trig_inverted_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", gpio_data->inverted);
+}
+
+static ssize_t gpio_trig_inverted_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t n)
+{
+ struct led_classdev *led = led_trigger_get_led(dev);
+ struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
+ unsigned long inverted;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &inverted);
+ if (ret < 0)
+ return ret;
+
+ if (inverted > 1)
+ return -EINVAL;
+
+ gpio_data->inverted = inverted;
+
+ /* After inverting, we need to update the LED. */
+ if (gpio_is_valid(gpio_data->gpio))
+ gpio_trig_irq(0, led);
+
+ return n;
+}
+static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show,
+ gpio_trig_inverted_store);
+
+static ssize_t gpio_trig_gpio_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", gpio_data->gpio);
+}
+
+static ssize_t gpio_trig_gpio_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t n)
+{
+ struct led_classdev *led = led_trigger_get_led(dev);
+ struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
+ unsigned gpio;
+ int ret;
+
+ ret = sscanf(buf, "%u", &gpio);
+ if (ret < 1) {
+ dev_err(dev, "couldn't read gpio number\n");
+ return -EINVAL;
+ }
+
+ if (gpio_data->gpio == gpio)
+ return n;
+
+ if (!gpio_is_valid(gpio)) {
+ if (gpio_is_valid(gpio_data->gpio))
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = gpio;
+ return n;
+ }
+
+ ret = request_threaded_irq(gpio_to_irq(gpio), NULL, gpio_trig_irq,
+ IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_RISING
+ | IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
+ if (ret) {
+ dev_err(dev, "request_irq failed with error %d\n", ret);
+ } else {
+ if (gpio_is_valid(gpio_data->gpio))
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = gpio;
+ /* After changing the GPIO, we need to update the LED. */
+ gpio_trig_irq(0, led);
+ }
+
+ return ret ? ret : n;
+}
+static DEVICE_ATTR(gpio, 0644, gpio_trig_gpio_show, gpio_trig_gpio_store);
+
+static struct attribute *gpio_trig_attrs[] = {
+ &dev_attr_desired_brightness.attr,
+ &dev_attr_inverted.attr,
+ &dev_attr_gpio.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(gpio_trig);
+
+static int gpio_trig_activate(struct led_classdev *led)
+{
+ struct gpio_trig_data *gpio_data;
+
+ gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
+ if (!gpio_data)
+ return -ENOMEM;
+
+ gpio_data->led = led;
+ gpio_data->gpio = -ENOENT;
+
+ led_set_trigger_data(led, gpio_data);
+
+ return 0;
+}
+
+static void gpio_trig_deactivate(struct led_classdev *led)
+{
+ struct gpio_trig_data *gpio_data = led_get_trigger_data(led);
+
+ if (gpio_is_valid(gpio_data->gpio))
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ kfree(gpio_data);
+}
+
+static struct led_trigger gpio_led_trigger = {
+ .name = "gpio",
+ .activate = gpio_trig_activate,
+ .deactivate = gpio_trig_deactivate,
+ .groups = gpio_trig_groups,
+};
+module_led_trigger(gpio_led_trigger);
+
+MODULE_AUTHOR("Felipe Balbi <me@felipebalbi.com>");
+MODULE_DESCRIPTION("GPIO LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c
new file mode 100644
index 0000000000..393b3ae832
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-heartbeat.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED Heartbeat Trigger
+ *
+ * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c and some arch's
+ * CONFIG_HEARTBEAT code.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/panic_notifier.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
+#include <linux/sched/loadavg.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include "../leds.h"
+
+static int panic_heartbeats;
+
+struct heartbeat_trig_data {
+ struct led_classdev *led_cdev;
+ unsigned int phase;
+ unsigned int period;
+ struct timer_list timer;
+ unsigned int invert;
+};
+
+static void led_heartbeat_function(struct timer_list *t)
+{
+ struct heartbeat_trig_data *heartbeat_data =
+ from_timer(heartbeat_data, t, timer);
+ struct led_classdev *led_cdev;
+ unsigned long brightness = LED_OFF;
+ unsigned long delay = 0;
+
+ led_cdev = heartbeat_data->led_cdev;
+
+ if (unlikely(panic_heartbeats)) {
+ led_set_brightness_nosleep(led_cdev, LED_OFF);
+ return;
+ }
+
+ if (test_and_clear_bit(LED_BLINK_BRIGHTNESS_CHANGE, &led_cdev->work_flags))
+ led_cdev->blink_brightness = led_cdev->new_blink_brightness;
+
+ /* acts like an actual heart beat -- ie thump-thump-pause... */
+ switch (heartbeat_data->phase) {
+ case 0:
+ /*
+ * The hyperbolic function below modifies the
+ * heartbeat period length in dependency of the
+ * current (1min) load. It goes through the points
+ * f(0)=1260, f(1)=860, f(5)=510, f(inf)->300.
+ */
+ heartbeat_data->period = 300 +
+ (6720 << FSHIFT) / (5 * avenrun[0] + (7 << FSHIFT));
+ heartbeat_data->period =
+ msecs_to_jiffies(heartbeat_data->period);
+ delay = msecs_to_jiffies(70);
+ heartbeat_data->phase++;
+ if (!heartbeat_data->invert)
+ brightness = led_cdev->blink_brightness;
+ break;
+ case 1:
+ delay = heartbeat_data->period / 4 - msecs_to_jiffies(70);
+ heartbeat_data->phase++;
+ if (heartbeat_data->invert)
+ brightness = led_cdev->blink_brightness;
+ break;
+ case 2:
+ delay = msecs_to_jiffies(70);
+ heartbeat_data->phase++;
+ if (!heartbeat_data->invert)
+ brightness = led_cdev->blink_brightness;
+ break;
+ default:
+ delay = heartbeat_data->period - heartbeat_data->period / 4 -
+ msecs_to_jiffies(70);
+ heartbeat_data->phase = 0;
+ if (heartbeat_data->invert)
+ brightness = led_cdev->blink_brightness;
+ break;
+ }
+
+ led_set_brightness_nosleep(led_cdev, brightness);
+ mod_timer(&heartbeat_data->timer, jiffies + delay);
+}
+
+static ssize_t led_invert_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct heartbeat_trig_data *heartbeat_data =
+ led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", heartbeat_data->invert);
+}
+
+static ssize_t led_invert_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct heartbeat_trig_data *heartbeat_data =
+ led_trigger_get_drvdata(dev);
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ heartbeat_data->invert = !!state;
+
+ return size;
+}
+
+static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
+
+static struct attribute *heartbeat_trig_attrs[] = {
+ &dev_attr_invert.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(heartbeat_trig);
+
+static int heartbeat_trig_activate(struct led_classdev *led_cdev)
+{
+ struct heartbeat_trig_data *heartbeat_data;
+
+ heartbeat_data = kzalloc(sizeof(*heartbeat_data), GFP_KERNEL);
+ if (!heartbeat_data)
+ return -ENOMEM;
+
+ led_set_trigger_data(led_cdev, heartbeat_data);
+ heartbeat_data->led_cdev = led_cdev;
+
+ timer_setup(&heartbeat_data->timer, led_heartbeat_function, 0);
+ heartbeat_data->phase = 0;
+ if (!led_cdev->blink_brightness)
+ led_cdev->blink_brightness = led_cdev->max_brightness;
+ led_heartbeat_function(&heartbeat_data->timer);
+ set_bit(LED_BLINK_SW, &led_cdev->work_flags);
+
+ return 0;
+}
+
+static void heartbeat_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct heartbeat_trig_data *heartbeat_data =
+ led_get_trigger_data(led_cdev);
+
+ timer_shutdown_sync(&heartbeat_data->timer);
+ kfree(heartbeat_data);
+ clear_bit(LED_BLINK_SW, &led_cdev->work_flags);
+}
+
+static struct led_trigger heartbeat_led_trigger = {
+ .name = "heartbeat",
+ .activate = heartbeat_trig_activate,
+ .deactivate = heartbeat_trig_deactivate,
+ .groups = heartbeat_trig_groups,
+};
+
+static int heartbeat_reboot_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ led_trigger_unregister(&heartbeat_led_trigger);
+ return NOTIFY_DONE;
+}
+
+static int heartbeat_panic_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ panic_heartbeats = 1;
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block heartbeat_reboot_nb = {
+ .notifier_call = heartbeat_reboot_notifier,
+};
+
+static struct notifier_block heartbeat_panic_nb = {
+ .notifier_call = heartbeat_panic_notifier,
+};
+
+static int __init heartbeat_trig_init(void)
+{
+ int rc = led_trigger_register(&heartbeat_led_trigger);
+
+ if (!rc) {
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &heartbeat_panic_nb);
+ register_reboot_notifier(&heartbeat_reboot_nb);
+ }
+ return rc;
+}
+
+static void __exit heartbeat_trig_exit(void)
+{
+ unregister_reboot_notifier(&heartbeat_reboot_nb);
+ atomic_notifier_chain_unregister(&panic_notifier_list,
+ &heartbeat_panic_nb);
+ led_trigger_unregister(&heartbeat_led_trigger);
+}
+
+module_init(heartbeat_trig_init);
+module_exit(heartbeat_trig_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("Heartbeat LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-mtd.c b/drivers/leds/trigger/ledtrig-mtd.c
new file mode 100644
index 0000000000..bbe6876a24
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-mtd.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED MTD trigger
+ *
+ * Copyright 2016 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+ *
+ * Based on LED IDE-Disk Activity Trigger
+ *
+ * Copyright 2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+#define BLINK_DELAY 30
+
+DEFINE_LED_TRIGGER(ledtrig_mtd);
+DEFINE_LED_TRIGGER(ledtrig_nand);
+
+void ledtrig_mtd_activity(void)
+{
+ led_trigger_blink_oneshot(ledtrig_mtd, BLINK_DELAY, BLINK_DELAY, 0);
+ led_trigger_blink_oneshot(ledtrig_nand, BLINK_DELAY, BLINK_DELAY, 0);
+}
+EXPORT_SYMBOL(ledtrig_mtd_activity);
+
+static int __init ledtrig_mtd_init(void)
+{
+ led_trigger_register_simple("mtd", &ledtrig_mtd);
+ led_trigger_register_simple("nand-disk", &ledtrig_nand);
+
+ return 0;
+}
+device_initcall(ledtrig_mtd_init);
diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
new file mode 100644
index 0000000000..d76214fa9a
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -0,0 +1,620 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright 2017 Ben Whitten <ben.whitten@gmail.com>
+// Copyright 2007 Oliver Jowett <oliver@opencloud.com>
+//
+// LED Kernel Netdev Trigger
+//
+// Toggles the LED to reflect the link and traffic state of a named net device
+//
+// Derived from ledtrig-timer.c which is:
+// Copyright 2005-2006 Openedhand Ltd.
+// Author: Richard Purdie <rpurdie@openedhand.com>
+
+#include <linux/atomic.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/mutex.h>
+#include <linux/rtnetlink.h>
+#include <linux/timer.h>
+#include "../leds.h"
+
+#define NETDEV_LED_DEFAULT_INTERVAL 50
+
+/*
+ * Configurable sysfs attributes:
+ *
+ * device_name - network device name to monitor
+ * interval - duration of LED blink, in milliseconds
+ * link - LED's normal state reflects whether the link is up
+ * (has carrier) or not
+ * tx - LED blinks on transmitted data
+ * rx - LED blinks on receive data
+ *
+ */
+
+struct led_netdev_data {
+ struct mutex lock;
+
+ struct delayed_work work;
+ struct notifier_block notifier;
+
+ struct led_classdev *led_cdev;
+ struct net_device *net_dev;
+
+ char device_name[IFNAMSIZ];
+ atomic_t interval;
+ unsigned int last_activity;
+
+ unsigned long mode;
+ int link_speed;
+ u8 duplex;
+
+ bool carrier_link_up;
+ bool hw_control;
+};
+
+static void set_baseline_state(struct led_netdev_data *trigger_data)
+{
+ int current_brightness;
+ struct led_classdev *led_cdev = trigger_data->led_cdev;
+
+ /* Already validated, hw control is possible with the requested mode */
+ if (trigger_data->hw_control) {
+ led_cdev->hw_control_set(led_cdev, trigger_data->mode);
+
+ return;
+ }
+
+ current_brightness = led_cdev->brightness;
+ if (current_brightness)
+ led_cdev->blink_brightness = current_brightness;
+ if (!led_cdev->blink_brightness)
+ led_cdev->blink_brightness = led_cdev->max_brightness;
+
+ if (!trigger_data->carrier_link_up) {
+ led_set_brightness(led_cdev, LED_OFF);
+ } else {
+ bool blink_on = false;
+
+ if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode))
+ blink_on = true;
+
+ if (test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) &&
+ trigger_data->link_speed == SPEED_10)
+ blink_on = true;
+
+ if (test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) &&
+ trigger_data->link_speed == SPEED_100)
+ blink_on = true;
+
+ if (test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) &&
+ trigger_data->link_speed == SPEED_1000)
+ blink_on = true;
+
+ if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
+ trigger_data->duplex == DUPLEX_HALF)
+ blink_on = true;
+
+ if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode) &&
+ trigger_data->duplex == DUPLEX_FULL)
+ blink_on = true;
+
+ if (blink_on)
+ led_set_brightness(led_cdev,
+ led_cdev->blink_brightness);
+ else
+ led_set_brightness(led_cdev, LED_OFF);
+
+ /* If we are looking for RX/TX start periodically
+ * checking stats
+ */
+ if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ||
+ test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
+ schedule_delayed_work(&trigger_data->work, 0);
+ }
+}
+
+static bool supports_hw_control(struct led_classdev *led_cdev)
+{
+ if (!led_cdev->hw_control_get || !led_cdev->hw_control_set ||
+ !led_cdev->hw_control_is_supported)
+ return false;
+
+ return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name);
+}
+
+/*
+ * Validate the configured netdev is the same as the one associated with
+ * the LED driver in hw control.
+ */
+static bool validate_net_dev(struct led_classdev *led_cdev,
+ struct net_device *net_dev)
+{
+ struct device *dev = led_cdev->hw_control_get_device(led_cdev);
+ struct net_device *ndev;
+
+ if (!dev)
+ return false;
+
+ ndev = to_net_dev(dev);
+
+ return ndev == net_dev;
+}
+
+static bool can_hw_control(struct led_netdev_data *trigger_data)
+{
+ unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL);
+ unsigned int interval = atomic_read(&trigger_data->interval);
+ struct led_classdev *led_cdev = trigger_data->led_cdev;
+ int ret;
+
+ if (!supports_hw_control(led_cdev))
+ return false;
+
+ /*
+ * Interval must be set to the default
+ * value. Any different value is rejected if in hw
+ * control.
+ */
+ if (interval != default_interval)
+ return false;
+
+ /*
+ * net_dev must be set with hw control, otherwise no
+ * blinking can be happening and there is nothing to
+ * offloaded. Additionally, for hw control to be
+ * valid, the configured netdev must be the same as
+ * netdev associated to the LED.
+ */
+ if (!validate_net_dev(led_cdev, trigger_data->net_dev))
+ return false;
+
+ /* Check if the requested mode is supported */
+ ret = led_cdev->hw_control_is_supported(led_cdev, trigger_data->mode);
+ /* Fall back to software blinking if not supported */
+ if (ret == -EOPNOTSUPP)
+ return false;
+ if (ret) {
+ dev_warn(led_cdev->dev,
+ "Current mode check failed with error %d\n", ret);
+ return false;
+ }
+
+ return true;
+}
+
+static void get_device_state(struct led_netdev_data *trigger_data)
+{
+ struct ethtool_link_ksettings cmd;
+
+ trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
+ if (!trigger_data->carrier_link_up)
+ return;
+
+ if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd)) {
+ trigger_data->link_speed = cmd.base.speed;
+ trigger_data->duplex = cmd.base.duplex;
+ }
+}
+
+static ssize_t device_name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+ ssize_t len;
+
+ mutex_lock(&trigger_data->lock);
+ len = sprintf(buf, "%s\n", trigger_data->device_name);
+ mutex_unlock(&trigger_data->lock);
+
+ return len;
+}
+
+static int set_device_name(struct led_netdev_data *trigger_data,
+ const char *name, size_t size)
+{
+ if (size >= IFNAMSIZ)
+ return -EINVAL;
+
+ cancel_delayed_work_sync(&trigger_data->work);
+
+ /*
+ * Take RTNL lock before trigger_data lock to prevent potential
+ * deadlock with netdev notifier registration.
+ */
+ rtnl_lock();
+ mutex_lock(&trigger_data->lock);
+
+ if (trigger_data->net_dev) {
+ dev_put(trigger_data->net_dev);
+ trigger_data->net_dev = NULL;
+ }
+
+ memcpy(trigger_data->device_name, name, size);
+ trigger_data->device_name[size] = 0;
+ if (size > 0 && trigger_data->device_name[size - 1] == '\n')
+ trigger_data->device_name[size - 1] = 0;
+
+ if (trigger_data->device_name[0] != 0)
+ trigger_data->net_dev =
+ dev_get_by_name(&init_net, trigger_data->device_name);
+
+ trigger_data->carrier_link_up = false;
+ trigger_data->link_speed = SPEED_UNKNOWN;
+ trigger_data->duplex = DUPLEX_UNKNOWN;
+ if (trigger_data->net_dev)
+ get_device_state(trigger_data);
+
+ trigger_data->last_activity = 0;
+
+ set_baseline_state(trigger_data);
+ mutex_unlock(&trigger_data->lock);
+ rtnl_unlock();
+
+ return 0;
+}
+
+static ssize_t device_name_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t size)
+{
+ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+ int ret;
+
+ ret = set_device_name(trigger_data, buf, size);
+
+ if (ret < 0)
+ return ret;
+ return size;
+}
+
+static DEVICE_ATTR_RW(device_name);
+
+static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
+ enum led_trigger_netdev_modes attr)
+{
+ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+ int bit;
+
+ switch (attr) {
+ case TRIGGER_NETDEV_LINK:
+ case TRIGGER_NETDEV_LINK_10:
+ case TRIGGER_NETDEV_LINK_100:
+ case TRIGGER_NETDEV_LINK_1000:
+ case TRIGGER_NETDEV_HALF_DUPLEX:
+ case TRIGGER_NETDEV_FULL_DUPLEX:
+ case TRIGGER_NETDEV_TX:
+ case TRIGGER_NETDEV_RX:
+ bit = attr;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return sprintf(buf, "%u\n", test_bit(bit, &trigger_data->mode));
+}
+
+static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
+ size_t size, enum led_trigger_netdev_modes attr)
+{
+ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+ unsigned long state, mode = trigger_data->mode;
+ int ret;
+ int bit;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ switch (attr) {
+ case TRIGGER_NETDEV_LINK:
+ case TRIGGER_NETDEV_LINK_10:
+ case TRIGGER_NETDEV_LINK_100:
+ case TRIGGER_NETDEV_LINK_1000:
+ case TRIGGER_NETDEV_HALF_DUPLEX:
+ case TRIGGER_NETDEV_FULL_DUPLEX:
+ case TRIGGER_NETDEV_TX:
+ case TRIGGER_NETDEV_RX:
+ bit = attr;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (state)
+ set_bit(bit, &mode);
+ else
+ clear_bit(bit, &mode);
+
+ if (test_bit(TRIGGER_NETDEV_LINK, &mode) &&
+ (test_bit(TRIGGER_NETDEV_LINK_10, &mode) ||
+ test_bit(TRIGGER_NETDEV_LINK_100, &mode) ||
+ test_bit(TRIGGER_NETDEV_LINK_1000, &mode)))
+ return -EINVAL;
+
+ cancel_delayed_work_sync(&trigger_data->work);
+
+ trigger_data->mode = mode;
+ trigger_data->hw_control = can_hw_control(trigger_data);
+
+ set_baseline_state(trigger_data);
+
+ return size;
+}
+
+#define DEFINE_NETDEV_TRIGGER(trigger_name, trigger) \
+ static ssize_t trigger_name##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+ { \
+ return netdev_led_attr_show(dev, buf, trigger); \
+ } \
+ static ssize_t trigger_name##_store(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t size) \
+ { \
+ return netdev_led_attr_store(dev, buf, size, trigger); \
+ } \
+ static DEVICE_ATTR_RW(trigger_name)
+
+DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
+DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
+DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
+DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
+DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
+DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
+DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
+DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
+
+static ssize_t interval_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n",
+ jiffies_to_msecs(atomic_read(&trigger_data->interval)));
+}
+
+static ssize_t interval_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t size)
+{
+ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+ unsigned long value;
+ int ret;
+
+ if (trigger_data->hw_control)
+ return -EINVAL;
+
+ ret = kstrtoul(buf, 0, &value);
+ if (ret)
+ return ret;
+
+ /* impose some basic bounds on the timer interval */
+ if (value >= 5 && value <= 10000) {
+ cancel_delayed_work_sync(&trigger_data->work);
+
+ atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
+ set_baseline_state(trigger_data); /* resets timer */
+ }
+
+ return size;
+}
+
+static DEVICE_ATTR_RW(interval);
+
+static ssize_t offloaded_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", trigger_data->hw_control);
+}
+
+static DEVICE_ATTR_RO(offloaded);
+
+static struct attribute *netdev_trig_attrs[] = {
+ &dev_attr_device_name.attr,
+ &dev_attr_link.attr,
+ &dev_attr_link_10.attr,
+ &dev_attr_link_100.attr,
+ &dev_attr_link_1000.attr,
+ &dev_attr_full_duplex.attr,
+ &dev_attr_half_duplex.attr,
+ &dev_attr_rx.attr,
+ &dev_attr_tx.attr,
+ &dev_attr_interval.attr,
+ &dev_attr_offloaded.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(netdev_trig);
+
+static int netdev_trig_notify(struct notifier_block *nb,
+ unsigned long evt, void *dv)
+{
+ struct net_device *dev =
+ netdev_notifier_info_to_dev((struct netdev_notifier_info *)dv);
+ struct led_netdev_data *trigger_data =
+ container_of(nb, struct led_netdev_data, notifier);
+
+ if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE
+ && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER
+ && evt != NETDEV_CHANGENAME)
+ return NOTIFY_DONE;
+
+ if (!(dev == trigger_data->net_dev ||
+ (evt == NETDEV_CHANGENAME && !strcmp(dev->name, trigger_data->device_name)) ||
+ (evt == NETDEV_REGISTER && !strcmp(dev->name, trigger_data->device_name))))
+ return NOTIFY_DONE;
+
+ cancel_delayed_work_sync(&trigger_data->work);
+
+ mutex_lock(&trigger_data->lock);
+
+ trigger_data->carrier_link_up = false;
+ trigger_data->link_speed = SPEED_UNKNOWN;
+ trigger_data->duplex = DUPLEX_UNKNOWN;
+ switch (evt) {
+ case NETDEV_CHANGENAME:
+ get_device_state(trigger_data);
+ fallthrough;
+ case NETDEV_REGISTER:
+ dev_put(trigger_data->net_dev);
+ dev_hold(dev);
+ trigger_data->net_dev = dev;
+ break;
+ case NETDEV_UNREGISTER:
+ dev_put(trigger_data->net_dev);
+ trigger_data->net_dev = NULL;
+ break;
+ case NETDEV_UP:
+ case NETDEV_CHANGE:
+ get_device_state(trigger_data);
+ break;
+ }
+
+ set_baseline_state(trigger_data);
+
+ mutex_unlock(&trigger_data->lock);
+
+ return NOTIFY_DONE;
+}
+
+/* here's the real work! */
+static void netdev_trig_work(struct work_struct *work)
+{
+ struct led_netdev_data *trigger_data =
+ container_of(work, struct led_netdev_data, work.work);
+ struct rtnl_link_stats64 *dev_stats;
+ unsigned int new_activity;
+ struct rtnl_link_stats64 temp;
+ unsigned long interval;
+ int invert;
+
+ /* If we dont have a device, insure we are off */
+ if (!trigger_data->net_dev) {
+ led_set_brightness(trigger_data->led_cdev, LED_OFF);
+ return;
+ }
+
+ /* If we are not looking for RX/TX then return */
+ if (!test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) &&
+ !test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
+ return;
+
+ dev_stats = dev_get_stats(trigger_data->net_dev, &temp);
+ new_activity =
+ (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ?
+ dev_stats->tx_packets : 0) +
+ (test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ?
+ dev_stats->rx_packets : 0);
+
+ if (trigger_data->last_activity != new_activity) {
+ led_stop_software_blink(trigger_data->led_cdev);
+
+ invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) ||
+ test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
+ test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
+ test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
+ test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
+ test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
+ interval = jiffies_to_msecs(
+ atomic_read(&trigger_data->interval));
+ /* base state is ON (link present) */
+ led_blink_set_oneshot(trigger_data->led_cdev,
+ &interval,
+ &interval,
+ invert);
+ trigger_data->last_activity = new_activity;
+ }
+
+ schedule_delayed_work(&trigger_data->work,
+ (atomic_read(&trigger_data->interval)*2));
+}
+
+static int netdev_trig_activate(struct led_classdev *led_cdev)
+{
+ struct led_netdev_data *trigger_data;
+ unsigned long mode = 0;
+ struct device *dev;
+ int rc;
+
+ trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
+ if (!trigger_data)
+ return -ENOMEM;
+
+ mutex_init(&trigger_data->lock);
+
+ trigger_data->notifier.notifier_call = netdev_trig_notify;
+ trigger_data->notifier.priority = 10;
+
+ INIT_DELAYED_WORK(&trigger_data->work, netdev_trig_work);
+
+ trigger_data->led_cdev = led_cdev;
+ trigger_data->net_dev = NULL;
+ trigger_data->device_name[0] = 0;
+
+ trigger_data->mode = 0;
+ atomic_set(&trigger_data->interval, msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL));
+ trigger_data->last_activity = 0;
+
+ /* Check if hw control is active by default on the LED.
+ * Init already enabled mode in hw control.
+ */
+ if (supports_hw_control(led_cdev)) {
+ dev = led_cdev->hw_control_get_device(led_cdev);
+ if (dev) {
+ const char *name = dev_name(dev);
+
+ set_device_name(trigger_data, name, strlen(name));
+ trigger_data->hw_control = true;
+
+ rc = led_cdev->hw_control_get(led_cdev, &mode);
+ if (!rc)
+ trigger_data->mode = mode;
+ }
+ }
+
+ led_set_trigger_data(led_cdev, trigger_data);
+
+ rc = register_netdevice_notifier(&trigger_data->notifier);
+ if (rc)
+ kfree(trigger_data);
+
+ return rc;
+}
+
+static void netdev_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct led_netdev_data *trigger_data = led_get_trigger_data(led_cdev);
+
+ unregister_netdevice_notifier(&trigger_data->notifier);
+
+ cancel_delayed_work_sync(&trigger_data->work);
+
+ led_set_brightness(led_cdev, LED_OFF);
+
+ dev_put(trigger_data->net_dev);
+
+ kfree(trigger_data);
+}
+
+static struct led_trigger netdev_led_trigger = {
+ .name = "netdev",
+ .activate = netdev_trig_activate,
+ .deactivate = netdev_trig_deactivate,
+ .groups = netdev_trig_groups,
+};
+
+module_led_trigger(netdev_led_trigger);
+
+MODULE_AUTHOR("Ben Whitten <ben.whitten@gmail.com>");
+MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
+MODULE_DESCRIPTION("Netdev LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-oneshot.c b/drivers/leds/trigger/ledtrig-oneshot.c
new file mode 100644
index 0000000000..bee3bd452a
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-oneshot.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * One-shot LED Trigger
+ *
+ * Copyright 2012, Fabio Baltieri <fabio.baltieri@gmail.com>
+ *
+ * Based on ledtrig-timer.c by Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+#define DEFAULT_DELAY 100
+
+struct oneshot_trig_data {
+ unsigned int invert;
+};
+
+static ssize_t led_shot(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+ struct oneshot_trig_data *oneshot_data = led_trigger_get_drvdata(dev);
+
+ led_blink_set_oneshot(led_cdev,
+ &led_cdev->blink_delay_on, &led_cdev->blink_delay_off,
+ oneshot_data->invert);
+
+ /* content is ignored */
+ return size;
+}
+static ssize_t led_invert_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct oneshot_trig_data *oneshot_data = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", oneshot_data->invert);
+}
+
+static ssize_t led_invert_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+ struct oneshot_trig_data *oneshot_data = led_trigger_get_drvdata(dev);
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ oneshot_data->invert = !!state;
+
+ if (oneshot_data->invert)
+ led_set_brightness_nosleep(led_cdev, LED_FULL);
+ else
+ led_set_brightness_nosleep(led_cdev, LED_OFF);
+
+ return size;
+}
+
+static ssize_t led_delay_on_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
+}
+
+static ssize_t led_delay_on_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ led_cdev->blink_delay_on = state;
+
+ return size;
+}
+
+static ssize_t led_delay_off_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
+}
+
+static ssize_t led_delay_off_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ led_cdev->blink_delay_off = state;
+
+ return size;
+}
+
+static DEVICE_ATTR(delay_on, 0644, led_delay_on_show, led_delay_on_store);
+static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
+static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
+static DEVICE_ATTR(shot, 0200, NULL, led_shot);
+
+static struct attribute *oneshot_trig_attrs[] = {
+ &dev_attr_delay_on.attr,
+ &dev_attr_delay_off.attr,
+ &dev_attr_invert.attr,
+ &dev_attr_shot.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(oneshot_trig);
+
+static void pattern_init(struct led_classdev *led_cdev)
+{
+ u32 *pattern;
+ unsigned int size = 0;
+
+ pattern = led_get_default_pattern(led_cdev, &size);
+ if (!pattern)
+ goto out_default;
+
+ if (size != 2) {
+ dev_warn(led_cdev->dev,
+ "Expected 2 but got %u values for delays pattern\n",
+ size);
+ goto out_default;
+ }
+
+ led_cdev->blink_delay_on = pattern[0];
+ led_cdev->blink_delay_off = pattern[1];
+ kfree(pattern);
+
+ return;
+
+out_default:
+ kfree(pattern);
+ led_cdev->blink_delay_on = DEFAULT_DELAY;
+ led_cdev->blink_delay_off = DEFAULT_DELAY;
+}
+
+static int oneshot_trig_activate(struct led_classdev *led_cdev)
+{
+ struct oneshot_trig_data *oneshot_data;
+
+ oneshot_data = kzalloc(sizeof(*oneshot_data), GFP_KERNEL);
+ if (!oneshot_data)
+ return -ENOMEM;
+
+ led_set_trigger_data(led_cdev, oneshot_data);
+
+ if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER) {
+ pattern_init(led_cdev);
+ /*
+ * Mark as initialized even on pattern_init() error because
+ * any consecutive call to it would produce the same error.
+ */
+ led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
+ }
+
+ return 0;
+}
+
+static void oneshot_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct oneshot_trig_data *oneshot_data = led_get_trigger_data(led_cdev);
+
+ kfree(oneshot_data);
+
+ /* Stop blinking */
+ led_set_brightness(led_cdev, LED_OFF);
+}
+
+static struct led_trigger oneshot_led_trigger = {
+ .name = "oneshot",
+ .activate = oneshot_trig_activate,
+ .deactivate = oneshot_trig_deactivate,
+ .groups = oneshot_trig_groups,
+};
+module_led_trigger(oneshot_led_trigger);
+
+MODULE_AUTHOR("Fabio Baltieri <fabio.baltieri@gmail.com>");
+MODULE_DESCRIPTION("One-shot LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-panic.c b/drivers/leds/trigger/ledtrig-panic.c
new file mode 100644
index 0000000000..64abf2e916
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-panic.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Kernel Panic LED Trigger
+ *
+ * Copyright 2016 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/notifier.h>
+#include <linux/panic_notifier.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+static struct led_trigger *trigger;
+
+/*
+ * This is called in a special context by the atomic panic
+ * notifier. This means the trigger can be changed without
+ * worrying about locking.
+ */
+static void led_trigger_set_panic(struct led_classdev *led_cdev)
+{
+ struct led_trigger *trig;
+
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (strcmp("panic", trig->name))
+ continue;
+ if (led_cdev->trigger)
+ list_del(&led_cdev->trig_list);
+ list_add_tail(&led_cdev->trig_list, &trig->led_cdevs);
+
+ /* Avoid the delayed blink path */
+ led_cdev->blink_delay_on = 0;
+ led_cdev->blink_delay_off = 0;
+
+ led_cdev->trigger = trig;
+ if (trig->activate)
+ trig->activate(led_cdev);
+ break;
+ }
+}
+
+static int led_trigger_panic_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ struct led_classdev *led_cdev;
+
+ list_for_each_entry(led_cdev, &leds_list, node)
+ if (led_cdev->flags & LED_PANIC_INDICATOR)
+ led_trigger_set_panic(led_cdev);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block led_trigger_panic_nb = {
+ .notifier_call = led_trigger_panic_notifier,
+};
+
+static long led_panic_blink(int state)
+{
+ led_trigger_event(trigger, state ? LED_FULL : LED_OFF);
+ return 0;
+}
+
+static int __init ledtrig_panic_init(void)
+{
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &led_trigger_panic_nb);
+
+ led_trigger_register_simple("panic", &trigger);
+ panic_blink = led_panic_blink;
+ return 0;
+}
+device_initcall(ledtrig_panic_init);
diff --git a/drivers/leds/trigger/ledtrig-pattern.c b/drivers/leds/trigger/ledtrig-pattern.c
new file mode 100644
index 0000000000..fadd87dbe9
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-pattern.c
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * LED pattern trigger
+ *
+ * Idea discussed with Pavel Machek. Raphael Teysseyre implemented
+ * the first version, Baolin Wang simplified and improved the approach.
+ */
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+
+#define MAX_PATTERNS 1024
+/*
+ * When doing gradual dimming, the led brightness will be updated
+ * every 50 milliseconds.
+ */
+#define UPDATE_INTERVAL 50
+
+struct pattern_trig_data {
+ struct led_classdev *led_cdev;
+ struct led_pattern patterns[MAX_PATTERNS];
+ struct led_pattern *curr;
+ struct led_pattern *next;
+ struct mutex lock;
+ u32 npatterns;
+ int repeat;
+ int last_repeat;
+ int delta_t;
+ bool is_indefinite;
+ bool is_hw_pattern;
+ struct timer_list timer;
+};
+
+static void pattern_trig_update_patterns(struct pattern_trig_data *data)
+{
+ data->curr = data->next;
+ if (!data->is_indefinite && data->curr == data->patterns)
+ data->repeat--;
+
+ if (data->next == data->patterns + data->npatterns - 1)
+ data->next = data->patterns;
+ else
+ data->next++;
+
+ data->delta_t = 0;
+}
+
+static int pattern_trig_compute_brightness(struct pattern_trig_data *data)
+{
+ int step_brightness;
+
+ /*
+ * If current tuple's duration is less than the dimming interval,
+ * we should treat it as a step change of brightness instead of
+ * doing gradual dimming.
+ */
+ if (data->delta_t == 0 || data->curr->delta_t < UPDATE_INTERVAL)
+ return data->curr->brightness;
+
+ step_brightness = abs(data->next->brightness - data->curr->brightness);
+ step_brightness = data->delta_t * step_brightness / data->curr->delta_t;
+
+ if (data->next->brightness > data->curr->brightness)
+ return data->curr->brightness + step_brightness;
+ else
+ return data->curr->brightness - step_brightness;
+}
+
+static void pattern_trig_timer_function(struct timer_list *t)
+{
+ struct pattern_trig_data *data = from_timer(data, t, timer);
+
+ for (;;) {
+ if (!data->is_indefinite && !data->repeat)
+ break;
+
+ if (data->curr->brightness == data->next->brightness) {
+ /* Step change of brightness */
+ led_set_brightness(data->led_cdev,
+ data->curr->brightness);
+ mod_timer(&data->timer,
+ jiffies + msecs_to_jiffies(data->curr->delta_t));
+ if (!data->next->delta_t) {
+ /* Skip the tuple with zero duration */
+ pattern_trig_update_patterns(data);
+ }
+ /* Select next tuple */
+ pattern_trig_update_patterns(data);
+ } else {
+ /* Gradual dimming */
+
+ /*
+ * If the accumulation time is larger than current
+ * tuple's duration, we should go next one and re-check
+ * if we repeated done.
+ */
+ if (data->delta_t > data->curr->delta_t) {
+ pattern_trig_update_patterns(data);
+ continue;
+ }
+
+ led_set_brightness(data->led_cdev,
+ pattern_trig_compute_brightness(data));
+ mod_timer(&data->timer,
+ jiffies + msecs_to_jiffies(UPDATE_INTERVAL));
+
+ /* Accumulate the gradual dimming time */
+ data->delta_t += UPDATE_INTERVAL;
+ }
+
+ break;
+ }
+}
+
+static int pattern_trig_start_pattern(struct led_classdev *led_cdev)
+{
+ struct pattern_trig_data *data = led_cdev->trigger_data;
+
+ if (!data->npatterns)
+ return 0;
+
+ if (data->is_hw_pattern) {
+ return led_cdev->pattern_set(led_cdev, data->patterns,
+ data->npatterns, data->repeat);
+ }
+
+ /* At least 2 tuples for software pattern. */
+ if (data->npatterns < 2)
+ return -EINVAL;
+
+ data->delta_t = 0;
+ data->curr = data->patterns;
+ data->next = data->patterns + 1;
+ data->timer.expires = jiffies;
+ add_timer(&data->timer);
+
+ return 0;
+}
+
+static ssize_t repeat_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *data = led_cdev->trigger_data;
+ int repeat;
+
+ mutex_lock(&data->lock);
+
+ repeat = data->last_repeat;
+
+ mutex_unlock(&data->lock);
+
+ return sysfs_emit(buf, "%d\n", repeat);
+}
+
+static ssize_t repeat_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *data = led_cdev->trigger_data;
+ int err, res;
+
+ err = kstrtos32(buf, 10, &res);
+ if (err)
+ return err;
+
+ /* Number 0 and negative numbers except -1 are invalid. */
+ if (res < -1 || res == 0)
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ del_timer_sync(&data->timer);
+
+ if (data->is_hw_pattern)
+ led_cdev->pattern_clear(led_cdev);
+
+ data->last_repeat = data->repeat = res;
+ /* -1 means repeat indefinitely */
+ if (data->repeat == -1)
+ data->is_indefinite = true;
+ else
+ data->is_indefinite = false;
+
+ err = pattern_trig_start_pattern(led_cdev);
+
+ mutex_unlock(&data->lock);
+ return err < 0 ? err : count;
+}
+
+static DEVICE_ATTR_RW(repeat);
+
+static ssize_t pattern_trig_show_patterns(struct pattern_trig_data *data,
+ char *buf, bool hw_pattern)
+{
+ ssize_t count = 0;
+ int i;
+
+ mutex_lock(&data->lock);
+
+ if (!data->npatterns || (data->is_hw_pattern ^ hw_pattern))
+ goto out;
+
+ for (i = 0; i < data->npatterns; i++) {
+ count += scnprintf(buf + count, PAGE_SIZE - count,
+ "%d %u ",
+ data->patterns[i].brightness,
+ data->patterns[i].delta_t);
+ }
+
+ buf[count - 1] = '\n';
+
+out:
+ mutex_unlock(&data->lock);
+ return count;
+}
+
+static int pattern_trig_store_patterns_string(struct pattern_trig_data *data,
+ const char *buf, size_t count)
+{
+ int ccount, cr, offset = 0;
+
+ while (offset < count - 1 && data->npatterns < MAX_PATTERNS) {
+ cr = 0;
+ ccount = sscanf(buf + offset, "%u %u %n",
+ &data->patterns[data->npatterns].brightness,
+ &data->patterns[data->npatterns].delta_t, &cr);
+
+ if (ccount != 2 ||
+ data->patterns[data->npatterns].brightness > data->led_cdev->max_brightness) {
+ data->npatterns = 0;
+ return -EINVAL;
+ }
+
+ offset += cr;
+ data->npatterns++;
+ }
+
+ return 0;
+}
+
+static int pattern_trig_store_patterns_int(struct pattern_trig_data *data,
+ const u32 *buf, size_t count)
+{
+ unsigned int i;
+
+ for (i = 0; i < count; i += 2) {
+ data->patterns[data->npatterns].brightness = buf[i];
+ data->patterns[data->npatterns].delta_t = buf[i + 1];
+ data->npatterns++;
+ }
+
+ return 0;
+}
+
+static ssize_t pattern_trig_store_patterns(struct led_classdev *led_cdev,
+ const char *buf, const u32 *buf_int,
+ size_t count, bool hw_pattern)
+{
+ struct pattern_trig_data *data = led_cdev->trigger_data;
+ int err = 0;
+
+ mutex_lock(&data->lock);
+
+ del_timer_sync(&data->timer);
+
+ if (data->is_hw_pattern)
+ led_cdev->pattern_clear(led_cdev);
+
+ data->is_hw_pattern = hw_pattern;
+ data->npatterns = 0;
+
+ if (buf)
+ err = pattern_trig_store_patterns_string(data, buf, count);
+ else
+ err = pattern_trig_store_patterns_int(data, buf_int, count);
+ if (err)
+ goto out;
+
+ err = pattern_trig_start_pattern(led_cdev);
+ if (err)
+ data->npatterns = 0;
+
+out:
+ mutex_unlock(&data->lock);
+ return err < 0 ? err : count;
+}
+
+static ssize_t pattern_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *data = led_cdev->trigger_data;
+
+ return pattern_trig_show_patterns(data, buf, false);
+}
+
+static ssize_t pattern_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return pattern_trig_store_patterns(led_cdev, buf, NULL, count, false);
+}
+
+static DEVICE_ATTR_RW(pattern);
+
+static ssize_t hw_pattern_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *data = led_cdev->trigger_data;
+
+ return pattern_trig_show_patterns(data, buf, true);
+}
+
+static ssize_t hw_pattern_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return pattern_trig_store_patterns(led_cdev, buf, NULL, count, true);
+}
+
+static DEVICE_ATTR_RW(hw_pattern);
+
+static umode_t pattern_trig_attrs_mode(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ if (attr == &dev_attr_repeat.attr || attr == &dev_attr_pattern.attr)
+ return attr->mode;
+ else if (attr == &dev_attr_hw_pattern.attr && led_cdev->pattern_set)
+ return attr->mode;
+
+ return 0;
+}
+
+static struct attribute *pattern_trig_attrs[] = {
+ &dev_attr_pattern.attr,
+ &dev_attr_hw_pattern.attr,
+ &dev_attr_repeat.attr,
+ NULL
+};
+
+static const struct attribute_group pattern_trig_group = {
+ .attrs = pattern_trig_attrs,
+ .is_visible = pattern_trig_attrs_mode,
+};
+
+static const struct attribute_group *pattern_trig_groups[] = {
+ &pattern_trig_group,
+ NULL,
+};
+
+static void pattern_init(struct led_classdev *led_cdev)
+{
+ unsigned int size = 0;
+ u32 *pattern;
+ int err;
+
+ pattern = led_get_default_pattern(led_cdev, &size);
+ if (!pattern)
+ return;
+
+ if (size % 2) {
+ dev_warn(led_cdev->dev, "Expected pattern of tuples\n");
+ goto out;
+ }
+
+ err = pattern_trig_store_patterns(led_cdev, NULL, pattern, size, false);
+ if (err < 0)
+ dev_warn(led_cdev->dev,
+ "Pattern initialization failed with error %d\n", err);
+
+out:
+ kfree(pattern);
+}
+
+static int pattern_trig_activate(struct led_classdev *led_cdev)
+{
+ struct pattern_trig_data *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ if (!!led_cdev->pattern_set ^ !!led_cdev->pattern_clear) {
+ dev_warn(led_cdev->dev,
+ "Hardware pattern ops validation failed\n");
+ led_cdev->pattern_set = NULL;
+ led_cdev->pattern_clear = NULL;
+ }
+
+ data->is_indefinite = true;
+ data->last_repeat = -1;
+ mutex_init(&data->lock);
+ data->led_cdev = led_cdev;
+ led_set_trigger_data(led_cdev, data);
+ timer_setup(&data->timer, pattern_trig_timer_function, 0);
+ led_cdev->activated = true;
+
+ if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER) {
+ pattern_init(led_cdev);
+ /*
+ * Mark as initialized even on pattern_init() error because
+ * any consecutive call to it would produce the same error.
+ */
+ led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
+ }
+
+ return 0;
+}
+
+static void pattern_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct pattern_trig_data *data = led_cdev->trigger_data;
+
+ if (!led_cdev->activated)
+ return;
+
+ if (led_cdev->pattern_clear)
+ led_cdev->pattern_clear(led_cdev);
+
+ timer_shutdown_sync(&data->timer);
+
+ led_set_brightness(led_cdev, LED_OFF);
+ kfree(data);
+ led_cdev->activated = false;
+}
+
+static struct led_trigger pattern_led_trigger = {
+ .name = "pattern",
+ .activate = pattern_trig_activate,
+ .deactivate = pattern_trig_deactivate,
+ .groups = pattern_trig_groups,
+};
+
+static int __init pattern_trig_init(void)
+{
+ return led_trigger_register(&pattern_led_trigger);
+}
+
+static void __exit pattern_trig_exit(void)
+{
+ led_trigger_unregister(&pattern_led_trigger);
+}
+
+module_init(pattern_trig_init);
+module_exit(pattern_trig_exit);
+
+MODULE_AUTHOR("Raphael Teysseyre <rteysseyre@gmail.com>");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@linaro.org>");
+MODULE_DESCRIPTION("LED Pattern trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-timer.c b/drivers/leds/trigger/ledtrig-timer.c
new file mode 100644
index 0000000000..b4688d1d9d
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-timer.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED Kernel Timer Trigger
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+static ssize_t led_delay_on_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
+}
+
+static ssize_t led_delay_on_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+ unsigned long state;
+ ssize_t ret;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
+ led_cdev->blink_delay_on = state;
+
+ return size;
+}
+
+static ssize_t led_delay_off_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
+}
+
+static ssize_t led_delay_off_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+ unsigned long state;
+ ssize_t ret;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
+ led_cdev->blink_delay_off = state;
+
+ return size;
+}
+
+static DEVICE_ATTR(delay_on, 0644, led_delay_on_show, led_delay_on_store);
+static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
+
+static struct attribute *timer_trig_attrs[] = {
+ &dev_attr_delay_on.attr,
+ &dev_attr_delay_off.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(timer_trig);
+
+static void pattern_init(struct led_classdev *led_cdev)
+{
+ u32 *pattern;
+ unsigned int size = 0;
+
+ pattern = led_get_default_pattern(led_cdev, &size);
+ if (!pattern)
+ return;
+
+ if (size != 2) {
+ dev_warn(led_cdev->dev,
+ "Expected 2 but got %u values for delays pattern\n",
+ size);
+ goto out;
+ }
+
+ led_cdev->blink_delay_on = pattern[0];
+ led_cdev->blink_delay_off = pattern[1];
+ /* led_blink_set() called by caller */
+
+out:
+ kfree(pattern);
+}
+
+static int timer_trig_activate(struct led_classdev *led_cdev)
+{
+ if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER) {
+ pattern_init(led_cdev);
+ /*
+ * Mark as initialized even on pattern_init() error because
+ * any consecutive call to it would produce the same error.
+ */
+ led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
+ }
+
+ /*
+ * If "set brightness to 0" is pending in workqueue, we don't
+ * want that to be reordered after blink_set()
+ */
+ flush_work(&led_cdev->set_brightness_work);
+ led_blink_set(led_cdev, &led_cdev->blink_delay_on,
+ &led_cdev->blink_delay_off);
+
+ return 0;
+}
+
+static void timer_trig_deactivate(struct led_classdev *led_cdev)
+{
+ /* Stop blinking */
+ led_set_brightness(led_cdev, LED_OFF);
+}
+
+static struct led_trigger timer_led_trigger = {
+ .name = "timer",
+ .activate = timer_trig_activate,
+ .deactivate = timer_trig_deactivate,
+ .groups = timer_trig_groups,
+};
+module_led_trigger(timer_led_trigger);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Timer LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-transient.c b/drivers/leds/trigger/ledtrig-transient.c
new file mode 100644
index 0000000000..f111fa7635
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-transient.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// LED Kernel Transient Trigger
+//
+// Transient trigger allows one shot timer activation. Please refer to
+// Documentation/leds/ledtrig-transient.rst for details
+// Copyright (C) 2012 Shuah Khan <shuahkhan@gmail.com>
+//
+// Based on Richard Purdie's ledtrig-timer.c and Atsushi Nemoto's
+// ledtrig-heartbeat.c
+// Design and use-case input from Jonas Bonn <jonas@southpole.se> and
+// Neil Brown <neilb@suse.de>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+struct transient_trig_data {
+ int activate;
+ int state;
+ int restore_state;
+ unsigned long duration;
+ struct timer_list timer;
+ struct led_classdev *led_cdev;
+};
+
+static void transient_timer_function(struct timer_list *t)
+{
+ struct transient_trig_data *transient_data =
+ from_timer(transient_data, t, timer);
+ struct led_classdev *led_cdev = transient_data->led_cdev;
+
+ transient_data->activate = 0;
+ led_set_brightness_nosleep(led_cdev, transient_data->restore_state);
+}
+
+static ssize_t transient_activate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct transient_trig_data *transient_data =
+ led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", transient_data->activate);
+}
+
+static ssize_t transient_activate_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = led_trigger_get_led(dev);
+ struct transient_trig_data *transient_data =
+ led_trigger_get_drvdata(dev);
+ unsigned long state;
+ ssize_t ret;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ if (state != 1 && state != 0)
+ return -EINVAL;
+
+ /* cancel the running timer */
+ if (state == 0 && transient_data->activate == 1) {
+ del_timer(&transient_data->timer);
+ transient_data->activate = state;
+ led_set_brightness_nosleep(led_cdev,
+ transient_data->restore_state);
+ return size;
+ }
+
+ /* start timer if there is no active timer */
+ if (state == 1 && transient_data->activate == 0 &&
+ transient_data->duration != 0) {
+ transient_data->activate = state;
+ led_set_brightness_nosleep(led_cdev, transient_data->state);
+ transient_data->restore_state =
+ (transient_data->state == LED_FULL) ? LED_OFF : LED_FULL;
+ mod_timer(&transient_data->timer,
+ jiffies + msecs_to_jiffies(transient_data->duration));
+ }
+
+ /* state == 0 && transient_data->activate == 0
+ timer is not active - just return */
+ /* state == 1 && transient_data->activate == 1
+ timer is already active - just return */
+
+ return size;
+}
+
+static ssize_t transient_duration_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct transient_trig_data *transient_data = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%lu\n", transient_data->duration);
+}
+
+static ssize_t transient_duration_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct transient_trig_data *transient_data =
+ led_trigger_get_drvdata(dev);
+ unsigned long state;
+ ssize_t ret;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ transient_data->duration = state;
+ return size;
+}
+
+static ssize_t transient_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct transient_trig_data *transient_data =
+ led_trigger_get_drvdata(dev);
+ int state;
+
+ state = (transient_data->state == LED_FULL) ? 1 : 0;
+ return sprintf(buf, "%d\n", state);
+}
+
+static ssize_t transient_state_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct transient_trig_data *transient_data =
+ led_trigger_get_drvdata(dev);
+ unsigned long state;
+ ssize_t ret;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ if (state != 1 && state != 0)
+ return -EINVAL;
+
+ transient_data->state = (state == 1) ? LED_FULL : LED_OFF;
+ return size;
+}
+
+static DEVICE_ATTR(activate, 0644, transient_activate_show,
+ transient_activate_store);
+static DEVICE_ATTR(duration, 0644, transient_duration_show,
+ transient_duration_store);
+static DEVICE_ATTR(state, 0644, transient_state_show, transient_state_store);
+
+static struct attribute *transient_trig_attrs[] = {
+ &dev_attr_activate.attr,
+ &dev_attr_duration.attr,
+ &dev_attr_state.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(transient_trig);
+
+static int transient_trig_activate(struct led_classdev *led_cdev)
+{
+ struct transient_trig_data *tdata;
+
+ tdata = kzalloc(sizeof(struct transient_trig_data), GFP_KERNEL);
+ if (!tdata)
+ return -ENOMEM;
+
+ led_set_trigger_data(led_cdev, tdata);
+ tdata->led_cdev = led_cdev;
+
+ timer_setup(&tdata->timer, transient_timer_function, 0);
+
+ return 0;
+}
+
+static void transient_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct transient_trig_data *transient_data = led_get_trigger_data(led_cdev);
+
+ timer_shutdown_sync(&transient_data->timer);
+ led_set_brightness_nosleep(led_cdev, transient_data->restore_state);
+ kfree(transient_data);
+}
+
+static struct led_trigger transient_trigger = {
+ .name = "transient",
+ .activate = transient_trig_activate,
+ .deactivate = transient_trig_deactivate,
+ .groups = transient_trig_groups,
+};
+module_led_trigger(transient_trigger);
+
+MODULE_AUTHOR("Shuah Khan <shuahkhan@gmail.com>");
+MODULE_DESCRIPTION("Transient LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-tty.c b/drivers/leds/trigger/ledtrig-tty.c
new file mode 100644
index 0000000000..3e69a7bde9
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-tty.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <uapi/linux/serial.h>
+
+#define LEDTRIG_TTY_INTERVAL 50
+
+struct ledtrig_tty_data {
+ struct led_classdev *led_cdev;
+ struct delayed_work dwork;
+ struct mutex mutex;
+ const char *ttyname;
+ struct tty_struct *tty;
+ int rx, tx;
+};
+
+static void ledtrig_tty_restart(struct ledtrig_tty_data *trigger_data)
+{
+ schedule_delayed_work(&trigger_data->dwork, 0);
+}
+
+static ssize_t ttyname_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+ ssize_t len = 0;
+
+ mutex_lock(&trigger_data->mutex);
+
+ if (trigger_data->ttyname)
+ len = sprintf(buf, "%s\n", trigger_data->ttyname);
+
+ mutex_unlock(&trigger_data->mutex);
+
+ return len;
+}
+
+static ssize_t ttyname_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t size)
+{
+ struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+ char *ttyname;
+ ssize_t ret = size;
+ bool running;
+
+ if (size > 0 && buf[size - 1] == '\n')
+ size -= 1;
+
+ if (size) {
+ ttyname = kmemdup_nul(buf, size, GFP_KERNEL);
+ if (!ttyname)
+ return -ENOMEM;
+ } else {
+ ttyname = NULL;
+ }
+
+ mutex_lock(&trigger_data->mutex);
+
+ running = trigger_data->ttyname != NULL;
+
+ kfree(trigger_data->ttyname);
+ tty_kref_put(trigger_data->tty);
+ trigger_data->tty = NULL;
+
+ trigger_data->ttyname = ttyname;
+
+ mutex_unlock(&trigger_data->mutex);
+
+ if (ttyname && !running)
+ ledtrig_tty_restart(trigger_data);
+
+ return ret;
+}
+static DEVICE_ATTR_RW(ttyname);
+
+static void ledtrig_tty_work(struct work_struct *work)
+{
+ struct ledtrig_tty_data *trigger_data =
+ container_of(work, struct ledtrig_tty_data, dwork.work);
+ struct serial_icounter_struct icount;
+ int ret;
+
+ mutex_lock(&trigger_data->mutex);
+
+ if (!trigger_data->ttyname) {
+ /* exit without rescheduling */
+ mutex_unlock(&trigger_data->mutex);
+ return;
+ }
+
+ /* try to get the tty corresponding to $ttyname */
+ if (!trigger_data->tty) {
+ dev_t devno;
+ struct tty_struct *tty;
+ int ret;
+
+ ret = tty_dev_name_to_number(trigger_data->ttyname, &devno);
+ if (ret < 0)
+ /*
+ * A device with this name might appear later, so keep
+ * retrying.
+ */
+ goto out;
+
+ tty = tty_kopen_shared(devno);
+ if (IS_ERR(tty) || !tty)
+ /* What to do? retry or abort */
+ goto out;
+
+ trigger_data->tty = tty;
+ }
+
+ ret = tty_get_icount(trigger_data->tty, &icount);
+ if (ret) {
+ dev_info(trigger_data->tty->dev, "Failed to get icount, stopped polling\n");
+ mutex_unlock(&trigger_data->mutex);
+ return;
+ }
+
+ if (icount.rx != trigger_data->rx ||
+ icount.tx != trigger_data->tx) {
+ unsigned long interval = LEDTRIG_TTY_INTERVAL;
+
+ led_blink_set_oneshot(trigger_data->led_cdev, &interval,
+ &interval, 0);
+
+ trigger_data->rx = icount.rx;
+ trigger_data->tx = icount.tx;
+ }
+
+out:
+ mutex_unlock(&trigger_data->mutex);
+ schedule_delayed_work(&trigger_data->dwork,
+ msecs_to_jiffies(LEDTRIG_TTY_INTERVAL * 2));
+}
+
+static struct attribute *ledtrig_tty_attrs[] = {
+ &dev_attr_ttyname.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(ledtrig_tty);
+
+static int ledtrig_tty_activate(struct led_classdev *led_cdev)
+{
+ struct ledtrig_tty_data *trigger_data;
+
+ trigger_data = kzalloc(sizeof(*trigger_data), GFP_KERNEL);
+ if (!trigger_data)
+ return -ENOMEM;
+
+ led_set_trigger_data(led_cdev, trigger_data);
+
+ INIT_DELAYED_WORK(&trigger_data->dwork, ledtrig_tty_work);
+ trigger_data->led_cdev = led_cdev;
+ mutex_init(&trigger_data->mutex);
+
+ return 0;
+}
+
+static void ledtrig_tty_deactivate(struct led_classdev *led_cdev)
+{
+ struct ledtrig_tty_data *trigger_data = led_get_trigger_data(led_cdev);
+
+ cancel_delayed_work_sync(&trigger_data->dwork);
+
+ kfree(trigger_data->ttyname);
+ tty_kref_put(trigger_data->tty);
+ trigger_data->tty = NULL;
+
+ kfree(trigger_data);
+}
+
+static struct led_trigger ledtrig_tty = {
+ .name = "tty",
+ .activate = ledtrig_tty_activate,
+ .deactivate = ledtrig_tty_deactivate,
+ .groups = ledtrig_tty_groups,
+};
+module_led_trigger(ledtrig_tty);
+
+MODULE_AUTHOR("Uwe Kleine-König <u.kleine-koenig@pengutronix.de>");
+MODULE_DESCRIPTION("UART LED trigger");
+MODULE_LICENSE("GPL v2");