diff options
Diffstat (limited to 'drivers/media/dvb-frontends/dib8000.c')
| -rw-r--r-- | drivers/media/dvb-frontends/dib8000.c | 4534 |
1 files changed, 4534 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c new file mode 100644 index 0000000000..2f51659181 --- /dev/null +++ b/drivers/media/dvb-frontends/dib8000.c @@ -0,0 +1,4534 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T). + * + * Copyright (C) 2009 DiBcom (http://www.dibcom.fr/) + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <asm/div64.h> + +#include <linux/int_log.h> + +#include <media/dvb_frontend.h> + +#include "dib8000.h" + +#define LAYER_ALL -1 +#define LAYER_A 1 +#define LAYER_B 2 +#define LAYER_C 3 + +#define MAX_NUMBER_OF_FRONTENDS 6 +/* #define DIB8000_AGC_FREEZE */ + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(fmt, arg...) do { \ + if (debug) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), \ + __func__, ##arg); \ +} while (0) + +struct i2c_device { + struct i2c_adapter *adap; + u8 addr; + u8 *i2c_write_buffer; + u8 *i2c_read_buffer; + struct mutex *i2c_buffer_lock; +}; + +enum param_loop_step { + LOOP_TUNE_1, + LOOP_TUNE_2 +}; + +enum dib8000_autosearch_step { + AS_START = 0, + AS_SEARCHING_FFT, + AS_SEARCHING_GUARD, + AS_DONE = 100, +}; + +enum timeout_mode { + SYMBOL_DEPENDENT_OFF = 0, + SYMBOL_DEPENDENT_ON, +}; + +struct dib8000_state { + struct dib8000_config cfg; + + struct i2c_device i2c; + + struct dibx000_i2c_master i2c_master; + + u16 wbd_ref; + + u8 current_band; + u32 current_bandwidth; + struct dibx000_agc_config *current_agc; + u32 timf; + u32 timf_default; + + u8 div_force_off:1; + u8 div_state:1; + u16 div_sync_wait; + + u8 agc_state; + u8 differential_constellation; + u8 diversity_onoff; + + s16 ber_monitored_layer; + u16 gpio_dir; + u16 gpio_val; + + u16 revision; + u8 isdbt_cfg_loaded; + enum frontend_tune_state tune_state; + s32 status; + + struct dvb_frontend *fe[MAX_NUMBER_OF_FRONTENDS]; + + /* for the I2C transfer */ + struct i2c_msg msg[2]; + u8 i2c_write_buffer[4]; + u8 i2c_read_buffer[2]; + struct mutex i2c_buffer_lock; + u8 input_mode_mpeg; + + u16 tuner_enable; + struct i2c_adapter dib8096p_tuner_adap; + u16 current_demod_bw; + + u16 seg_mask; + u16 seg_diff_mask; + u16 mode; + u8 layer_b_nb_seg; + u8 layer_c_nb_seg; + + u8 channel_parameters_set; + u16 autosearch_state; + u16 found_nfft; + u16 found_guard; + u8 subchannel; + u8 symbol_duration; + unsigned long timeout; + u8 longest_intlv_layer; + u16 output_mode; + + /* for DVBv5 stats */ + s64 init_ucb; + unsigned long per_jiffies_stats; + unsigned long ber_jiffies_stats; + unsigned long ber_jiffies_stats_layer[3]; + +#ifdef DIB8000_AGC_FREEZE + u16 agc1_max; + u16 agc1_min; + u16 agc2_max; + u16 agc2_min; +#endif +}; + +enum dib8000_power_mode { + DIB8000_POWER_ALL = 0, + DIB8000_POWER_INTERFACE_ONLY, +}; + +static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg) +{ + u16 ret; + struct i2c_msg msg[2] = { + {.addr = i2c->addr >> 1, .flags = 0, .len = 2}, + {.addr = i2c->addr >> 1, .flags = I2C_M_RD, .len = 2}, + }; + + if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return 0; + } + + msg[0].buf = i2c->i2c_write_buffer; + msg[0].buf[0] = reg >> 8; + msg[0].buf[1] = reg & 0xff; + msg[1].buf = i2c->i2c_read_buffer; + + if (i2c_transfer(i2c->adap, msg, 2) != 2) + dprintk("i2c read error on %d\n", reg); + + ret = (msg[1].buf[0] << 8) | msg[1].buf[1]; + mutex_unlock(i2c->i2c_buffer_lock); + return ret; +} + +static u16 __dib8000_read_word(struct dib8000_state *state, u16 reg) +{ + u16 ret; + + state->i2c_write_buffer[0] = reg >> 8; + state->i2c_write_buffer[1] = reg & 0xff; + + memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c.addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 2; + state->msg[1].addr = state->i2c.addr >> 1; + state->msg[1].flags = I2C_M_RD; + state->msg[1].buf = state->i2c_read_buffer; + state->msg[1].len = 2; + + if (i2c_transfer(state->i2c.adap, state->msg, 2) != 2) + dprintk("i2c read error on %d\n", reg); + + ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1]; + + return ret; +} + +static u16 dib8000_read_word(struct dib8000_state *state, u16 reg) +{ + u16 ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return 0; + } + + ret = __dib8000_read_word(state, reg); + + mutex_unlock(&state->i2c_buffer_lock); + + return ret; +} + +static u32 dib8000_read32(struct dib8000_state *state, u16 reg) +{ + u16 rw[2]; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return 0; + } + + rw[0] = __dib8000_read_word(state, reg + 0); + rw[1] = __dib8000_read_word(state, reg + 1); + + mutex_unlock(&state->i2c_buffer_lock); + + return ((rw[0] << 16) | (rw[1])); +} + +static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val) +{ + struct i2c_msg msg = {.addr = i2c->addr >> 1, .flags = 0, .len = 4}; + int ret = 0; + + if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return -EINVAL; + } + + msg.buf = i2c->i2c_write_buffer; + msg.buf[0] = (reg >> 8) & 0xff; + msg.buf[1] = reg & 0xff; + msg.buf[2] = (val >> 8) & 0xff; + msg.buf[3] = val & 0xff; + + ret = i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0; + mutex_unlock(i2c->i2c_buffer_lock); + + return ret; +} + +static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val) +{ + int ret; + + if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return -EINVAL; + } + + state->i2c_write_buffer[0] = (reg >> 8) & 0xff; + state->i2c_write_buffer[1] = reg & 0xff; + state->i2c_write_buffer[2] = (val >> 8) & 0xff; + state->i2c_write_buffer[3] = val & 0xff; + + memset(&state->msg[0], 0, sizeof(struct i2c_msg)); + state->msg[0].addr = state->i2c.addr >> 1; + state->msg[0].flags = 0; + state->msg[0].buf = state->i2c_write_buffer; + state->msg[0].len = 4; + + ret = (i2c_transfer(state->i2c.adap, state->msg, 1) != 1 ? + -EREMOTEIO : 0); + mutex_unlock(&state->i2c_buffer_lock); + + return ret; +} + +static const s16 coeff_2k_sb_1seg_dqpsk[8] = { + (769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c, + (920 << 5) | 0x09 +}; + +static const s16 coeff_2k_sb_1seg[8] = { + (692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f +}; + +static const s16 coeff_2k_sb_3seg_0dqpsk_1dqpsk[8] = { + (832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11, + (-931 << 5) | 0x0f +}; + +static const s16 coeff_2k_sb_3seg_0dqpsk[8] = { + (622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e, + (982 << 5) | 0x0c +}; + +static const s16 coeff_2k_sb_3seg_1dqpsk[8] = { + (699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12, + (-720 << 5) | 0x0d +}; + +static const s16 coeff_2k_sb_3seg[8] = { + (664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e, + (-610 << 5) | 0x0a +}; + +static const s16 coeff_4k_sb_1seg_dqpsk[8] = { + (-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f, + (-922 << 5) | 0x0d +}; + +static const s16 coeff_4k_sb_1seg[8] = { + (638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d, + (-655 << 5) | 0x0a +}; + +static const s16 coeff_4k_sb_3seg_0dqpsk_1dqpsk[8] = { + (-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14, + (-958 << 5) | 0x13 +}; + +static const s16 coeff_4k_sb_3seg_0dqpsk[8] = { + (-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12, + (-568 << 5) | 0x0f +}; + +static const s16 coeff_4k_sb_3seg_1dqpsk[8] = { + (-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14, + (-848 << 5) | 0x13 +}; + +static const s16 coeff_4k_sb_3seg[8] = { + (612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12, + (-869 << 5) | 0x13 +}; + +static const s16 coeff_8k_sb_1seg_dqpsk[8] = { + (-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13, + (-598 << 5) | 0x10 +}; + +static const s16 coeff_8k_sb_1seg[8] = { + (673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f, + (585 << 5) | 0x0f +}; + +static const s16 coeff_8k_sb_3seg_0dqpsk_1dqpsk[8] = { + (863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18, + (0 << 5) | 0x14 +}; + +static const s16 coeff_8k_sb_3seg_0dqpsk[8] = { + (-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15, + (-877 << 5) | 0x15 +}; + +static const s16 coeff_8k_sb_3seg_1dqpsk[8] = { + (-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18, + (-921 << 5) | 0x14 +}; + +static const s16 coeff_8k_sb_3seg[8] = { + (514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15, + (690 << 5) | 0x14 +}; + +static const s16 ana_fe_coeff_3seg[24] = { + 81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017 +}; + +static const s16 ana_fe_coeff_1seg[24] = { + 249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003 +}; + +static const s16 ana_fe_coeff_13seg[24] = { + 396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1 +}; + +static u16 fft_to_mode(struct dib8000_state *state) +{ + u16 mode; + switch (state->fe[0]->dtv_property_cache.transmission_mode) { + case TRANSMISSION_MODE_2K: + mode = 1; + break; + case TRANSMISSION_MODE_4K: + mode = 2; + break; + default: + case TRANSMISSION_MODE_AUTO: + case TRANSMISSION_MODE_8K: + mode = 3; + break; + } + return mode; +} + +static void dib8000_set_acquisition_mode(struct dib8000_state *state) +{ + u16 nud = dib8000_read_word(state, 298); + nud |= (1 << 3) | (1 << 0); + dprintk("acquisition mode activated\n"); + dib8000_write_word(state, 298, nud); +} +static int dib8000_set_output_mode(struct dvb_frontend *fe, int mode) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 outreg, fifo_threshold, smo_mode, sram = 0x0205; /* by default SDRAM deintlv is enabled */ + + state->output_mode = mode; + outreg = 0; + fifo_threshold = 1792; + smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1); + + dprintk("-I- Setting output mode for demod %p to %d\n", + &state->fe[0], mode); + + switch (mode) { + case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock + outreg = (1 << 10); /* 0x0400 */ + break; + case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock + outreg = (1 << 10) | (1 << 6); /* 0x0440 */ + break; + case OUTMODE_MPEG2_SERIAL: // STBs with serial input + outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */ + break; + case OUTMODE_DIVERSITY: + if (state->cfg.hostbus_diversity) { + outreg = (1 << 10) | (4 << 6); /* 0x0500 */ + sram &= 0xfdff; + } else + sram |= 0x0c00; + break; + case OUTMODE_MPEG2_FIFO: // e.g. USB feeding + smo_mode |= (3 << 1); + fifo_threshold = 512; + outreg = (1 << 10) | (5 << 6); + break; + case OUTMODE_HIGH_Z: // disable + outreg = 0; + break; + + case OUTMODE_ANALOG_ADC: + outreg = (1 << 10) | (3 << 6); + dib8000_set_acquisition_mode(state); + break; + + default: + dprintk("Unhandled output_mode passed to be set for demod %p\n", + &state->fe[0]); + return -EINVAL; + } + + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5); + + dib8000_write_word(state, 299, smo_mode); + dib8000_write_word(state, 300, fifo_threshold); /* synchronous fread */ + dib8000_write_word(state, 1286, outreg); + dib8000_write_word(state, 1291, sram); + + return 0; +} + +static int dib8000_set_diversity_in(struct dvb_frontend *fe, int onoff) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 tmp, sync_wait = dib8000_read_word(state, 273) & 0xfff0; + + dprintk("set diversity input to %i\n", onoff); + if (!state->differential_constellation) { + dib8000_write_word(state, 272, 1 << 9); //dvsy_off_lmod4 = 1 + dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2); // sync_enable = 1; comb_mode = 2 + } else { + dib8000_write_word(state, 272, 0); //dvsy_off_lmod4 = 0 + dib8000_write_word(state, 273, sync_wait); // sync_enable = 0; comb_mode = 0 + } + state->diversity_onoff = onoff; + + switch (onoff) { + case 0: /* only use the internal way - not the diversity input */ + dib8000_write_word(state, 270, 1); + dib8000_write_word(state, 271, 0); + break; + case 1: /* both ways */ + dib8000_write_word(state, 270, 6); + dib8000_write_word(state, 271, 6); + break; + case 2: /* only the diversity input */ + dib8000_write_word(state, 270, 0); + dib8000_write_word(state, 271, 1); + break; + } + + if (state->revision == 0x8002) { + tmp = dib8000_read_word(state, 903); + dib8000_write_word(state, 903, tmp & ~(1 << 3)); + msleep(30); + dib8000_write_word(state, 903, tmp | (1 << 3)); + } + return 0; +} + +static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_power_mode mode) +{ + /* by default everything is going to be powered off */ + u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff, + reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3, + reg_1280; + + if (state->revision != 0x8090) + reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00; + else + reg_1280 = (dib8000_read_word(state, 1280) & 0x707f) | 0x8f80; + + /* now, depending on the requested mode, we power on */ + switch (mode) { + /* power up everything in the demod */ + case DIB8000_POWER_ALL: + reg_774 = 0x0000; + reg_775 = 0x0000; + reg_776 = 0x0000; + reg_900 &= 0xfffc; + if (state->revision != 0x8090) + reg_1280 &= 0x00ff; + else + reg_1280 &= 0x707f; + break; + case DIB8000_POWER_INTERFACE_ONLY: + if (state->revision != 0x8090) + reg_1280 &= 0x00ff; + else + reg_1280 &= 0xfa7b; + break; + } + + dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x\n", reg_774, reg_775, reg_776, reg_900, reg_1280); + dib8000_write_word(state, 774, reg_774); + dib8000_write_word(state, 775, reg_775); + dib8000_write_word(state, 776, reg_776); + dib8000_write_word(state, 900, reg_900); + dib8000_write_word(state, 1280, reg_1280); +} + +static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no) +{ + int ret = 0; + u16 reg, reg_907 = dib8000_read_word(state, 907); + u16 reg_908 = dib8000_read_word(state, 908); + + switch (no) { + case DIBX000_SLOW_ADC_ON: + if (state->revision != 0x8090) { + reg_908 |= (1 << 1) | (1 << 0); + ret |= dib8000_write_word(state, 908, reg_908); + reg_908 &= ~(1 << 1); + } else { + reg = dib8000_read_word(state, 1925); + /* en_slowAdc = 1 & reset_sladc = 1 */ + dib8000_write_word(state, 1925, reg | + (1<<4) | (1<<2)); + + /* read access to make it works... strange ... */ + reg = dib8000_read_word(state, 1925); + msleep(20); + /* en_slowAdc = 1 & reset_sladc = 0 */ + dib8000_write_word(state, 1925, reg & ~(1<<4)); + + reg = dib8000_read_word(state, 921) & ~((0x3 << 14) + | (0x3 << 12)); + /* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ; + (Vin2 = Vcm) */ + dib8000_write_word(state, 921, reg | (1 << 14) + | (3 << 12)); + } + break; + + case DIBX000_SLOW_ADC_OFF: + if (state->revision == 0x8090) { + reg = dib8000_read_word(state, 1925); + /* reset_sladc = 1 en_slowAdc = 0 */ + dib8000_write_word(state, 1925, + (reg & ~(1<<2)) | (1<<4)); + } + reg_908 |= (1 << 1) | (1 << 0); + break; + + case DIBX000_ADC_ON: + reg_907 &= 0x0fff; + reg_908 &= 0x0003; + break; + + case DIBX000_ADC_OFF: // leave the VBG voltage on + reg_907 = (1 << 13) | (1 << 12); + reg_908 = (1 << 6) | (1 << 5) | (1 << 4) | (1 << 3) | (1 << 1); + break; + + case DIBX000_VBG_ENABLE: + reg_907 &= ~(1 << 15); + break; + + case DIBX000_VBG_DISABLE: + reg_907 |= (1 << 15); + break; + + default: + break; + } + + ret |= dib8000_write_word(state, 907, reg_907); + ret |= dib8000_write_word(state, 908, reg_908); + + return ret; +} + +static int dib8000_set_bandwidth(struct dvb_frontend *fe, u32 bw) +{ + struct dib8000_state *state = fe->demodulator_priv; + u32 timf; + + if (bw == 0) + bw = 6000; + + if (state->timf == 0) { + dprintk("using default timf\n"); + timf = state->timf_default; + } else { + dprintk("using updated timf\n"); + timf = state->timf; + } + + dib8000_write_word(state, 29, (u16) ((timf >> 16) & 0xffff)); + dib8000_write_word(state, 30, (u16) ((timf) & 0xffff)); + + return 0; +} + +static int dib8000_sad_calib(struct dib8000_state *state) +{ + u8 sad_sel = 3; + + if (state->revision == 0x8090) { + dib8000_write_word(state, 922, (sad_sel << 2)); + dib8000_write_word(state, 923, 2048); + + dib8000_write_word(state, 922, (sad_sel << 2) | 0x1); + dib8000_write_word(state, 922, (sad_sel << 2)); + } else { + /* internal */ + dib8000_write_word(state, 923, (0 << 1) | (0 << 0)); + dib8000_write_word(state, 924, 776); + + /* do the calibration */ + dib8000_write_word(state, 923, (1 << 0)); + dib8000_write_word(state, 923, (0 << 0)); + } + + msleep(1); + return 0; +} + +static int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value) +{ + struct dib8000_state *state = fe->demodulator_priv; + if (value > 4095) + value = 4095; + state->wbd_ref = value; + return dib8000_write_word(state, 106, value); +} + +static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw) +{ + dprintk("ifreq: %d %x, inversion: %d\n", bw->ifreq, bw->ifreq, bw->ifreq >> 25); + if (state->revision != 0x8090) { + dib8000_write_word(state, 23, + (u16) (((bw->internal * 1000) >> 16) & 0xffff)); + dib8000_write_word(state, 24, + (u16) ((bw->internal * 1000) & 0xffff)); + } else { + dib8000_write_word(state, 23, (u16) (((bw->internal / 2 * 1000) >> 16) & 0xffff)); + dib8000_write_word(state, 24, + (u16) ((bw->internal / 2 * 1000) & 0xffff)); + } + dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff)); + dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff)); + dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003)); + + if (state->revision != 0x8090) + dib8000_write_word(state, 922, bw->sad_cfg); +} + +static void dib8000_reset_pll(struct dib8000_state *state) +{ + const struct dibx000_bandwidth_config *pll = state->cfg.pll; + u16 clk_cfg1, reg; + + if (state->revision != 0x8090) { + dib8000_write_word(state, 901, + (pll->pll_prediv << 8) | (pll->pll_ratio << 0)); + + clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) | + (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | + (1 << 3) | (pll->pll_range << 1) | + (pll->pll_reset << 0); + + dib8000_write_word(state, 902, clk_cfg1); + clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3); + dib8000_write_word(state, 902, clk_cfg1); + + dprintk("clk_cfg1: 0x%04x\n", clk_cfg1); + + /* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */ + if (state->cfg.pll->ADClkSrc == 0) + dib8000_write_word(state, 904, + (0 << 15) | (0 << 12) | (0 << 10) | + (pll->modulo << 8) | + (pll->ADClkSrc << 7) | (0 << 1)); + else if (state->cfg.refclksel != 0) + dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | + ((state->cfg.refclksel & 0x3) << 10) | + (pll->modulo << 8) | + (pll->ADClkSrc << 7) | (0 << 1)); + else + dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | + (3 << 10) | (pll->modulo << 8) | + (pll->ADClkSrc << 7) | (0 << 1)); + } else { + dib8000_write_word(state, 1856, (!pll->pll_reset<<13) | + (pll->pll_range<<12) | (pll->pll_ratio<<6) | + (pll->pll_prediv)); + + reg = dib8000_read_word(state, 1857); + dib8000_write_word(state, 1857, reg|(!pll->pll_bypass<<15)); + + reg = dib8000_read_word(state, 1858); /* Force clk out pll /2 */ + dib8000_write_word(state, 1858, reg | 1); + + dib8000_write_word(state, 904, (pll->modulo << 8)); + } + + dib8000_reset_pll_common(state, pll); +} + +static int dib8000_update_pll(struct dvb_frontend *fe, + struct dibx000_bandwidth_config *pll, u32 bw, u8 ratio) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 reg_1857, reg_1856 = dib8000_read_word(state, 1856); + u8 loopdiv, prediv, oldprediv = state->cfg.pll->pll_prediv ; + u32 internal, xtal; + + /* get back old values */ + prediv = reg_1856 & 0x3f; + loopdiv = (reg_1856 >> 6) & 0x3f; + + if ((pll == NULL) || (pll->pll_prediv == prediv && + pll->pll_ratio == loopdiv)) + return -EINVAL; + + dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)\n", prediv, pll->pll_prediv, loopdiv, pll->pll_ratio); + if (state->revision == 0x8090) { + reg_1856 &= 0xf000; + reg_1857 = dib8000_read_word(state, 1857); + /* disable PLL */ + dib8000_write_word(state, 1857, reg_1857 & ~(1 << 15)); + + dib8000_write_word(state, 1856, reg_1856 | + ((pll->pll_ratio & 0x3f) << 6) | + (pll->pll_prediv & 0x3f)); + + /* write new system clk into P_sec_len */ + internal = dib8000_read32(state, 23) / 1000; + dprintk("Old Internal = %d\n", internal); + xtal = 2 * (internal / loopdiv) * prediv; + internal = 1000 * (xtal/pll->pll_prediv) * pll->pll_ratio; + dprintk("Xtal = %d , New Fmem = %d New Fdemod = %d, New Fsampling = %d\n", xtal, internal/1000, internal/2000, internal/8000); + dprintk("New Internal = %d\n", internal); + + dib8000_write_word(state, 23, + (u16) (((internal / 2) >> 16) & 0xffff)); + dib8000_write_word(state, 24, (u16) ((internal / 2) & 0xffff)); + /* enable PLL */ + dib8000_write_word(state, 1857, reg_1857 | (1 << 15)); + + while (((dib8000_read_word(state, 1856)>>15)&0x1) != 1) + dprintk("Waiting for PLL to lock\n"); + + /* verify */ + reg_1856 = dib8000_read_word(state, 1856); + dprintk("PLL Updated with prediv = %d and loopdiv = %d\n", + reg_1856&0x3f, (reg_1856>>6)&0x3f); + } else { + if (bw != state->current_demod_bw) { + /** Bandwidth change => force PLL update **/ + dprintk("PLL: Bandwidth Change %d MHz -> %d MHz (prediv: %d->%d)\n", state->current_demod_bw / 1000, bw / 1000, oldprediv, state->cfg.pll->pll_prediv); + + if (state->cfg.pll->pll_prediv != oldprediv) { + /** Full PLL change only if prediv is changed **/ + + /** full update => bypass and reconfigure **/ + dprintk("PLL: New Setting for %d MHz Bandwidth (prediv: %d, ratio: %d)\n", bw/1000, state->cfg.pll->pll_prediv, state->cfg.pll->pll_ratio); + dib8000_write_word(state, 902, dib8000_read_word(state, 902) | (1<<3)); /* bypass PLL */ + dib8000_reset_pll(state); + dib8000_write_word(state, 898, 0x0004); /* sad */ + } else + ratio = state->cfg.pll->pll_ratio; + + state->current_demod_bw = bw; + } + + if (ratio != 0) { + /** ratio update => only change ratio **/ + dprintk("PLL: Update ratio (prediv: %d, ratio: %d)\n", state->cfg.pll->pll_prediv, ratio); + dib8000_write_word(state, 901, (state->cfg.pll->pll_prediv << 8) | (ratio << 0)); /* only the PLL ratio is updated. */ + } + } + + return 0; +} + +static int dib8000_reset_gpio(struct dib8000_state *st) +{ + /* reset the GPIOs */ + dib8000_write_word(st, 1029, st->cfg.gpio_dir); + dib8000_write_word(st, 1030, st->cfg.gpio_val); + + /* TODO 782 is P_gpio_od */ + + dib8000_write_word(st, 1032, st->cfg.gpio_pwm_pos); + + dib8000_write_word(st, 1037, st->cfg.pwm_freq_div); + return 0; +} + +static int dib8000_cfg_gpio(struct dib8000_state *st, u8 num, u8 dir, u8 val) +{ + st->cfg.gpio_dir = dib8000_read_word(st, 1029); + st->cfg.gpio_dir &= ~(1 << num); /* reset the direction bit */ + st->cfg.gpio_dir |= (dir & 0x1) << num; /* set the new direction */ + dib8000_write_word(st, 1029, st->cfg.gpio_dir); + + st->cfg.gpio_val = dib8000_read_word(st, 1030); + st->cfg.gpio_val &= ~(1 << num); /* reset the direction bit */ + st->cfg.gpio_val |= (val & 0x01) << num; /* set the new value */ + dib8000_write_word(st, 1030, st->cfg.gpio_val); + + dprintk("gpio dir: %x: gpio val: %x\n", st->cfg.gpio_dir, st->cfg.gpio_val); + + return 0; +} + +static int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + struct dib8000_state *state = fe->demodulator_priv; + return dib8000_cfg_gpio(state, num, dir, val); +} + +static const u16 dib8000_defaults[] = { + /* auto search configuration - lock0 by default waiting + * for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */ + 3, 7, + 0x0004, + 0x0400, + 0x0814, + + 12, 11, + 0x001b, + 0x7740, + 0x005b, + 0x8d80, + 0x01c9, + 0xc380, + 0x0000, + 0x0080, + 0x0000, + 0x0090, + 0x0001, + 0xd4c0, + + /*1, 32, + 0x6680 // P_corm_thres Lock algorithms configuration */ + + 11, 80, /* set ADC level to -16 */ + (1 << 13) - 825 - 117, + (1 << 13) - 837 - 117, + (1 << 13) - 811 - 117, + (1 << 13) - 766 - 117, + (1 << 13) - 737 - 117, + (1 << 13) - 693 - 117, + (1 << 13) - 648 - 117, + (1 << 13) - 619 - 117, + (1 << 13) - 575 - 117, + (1 << 13) - 531 - 117, + (1 << 13) - 501 - 117, + + 4, 108, + 0, + 0, + 0, + 0, + + 1, 175, + 0x0410, + 1, 179, + 8192, // P_fft_nb_to_cut + + 6, 181, + 0x2800, // P_coff_corthres_ ( 2k 4k 8k ) 0x2800 + 0x2800, + 0x2800, + 0x2800, // P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800 + 0x2800, + 0x2800, + + 2, 193, + 0x0666, // P_pha3_thres + 0x0000, // P_cti_use_cpe, P_cti_use_prog + + 2, 205, + 0x200f, // P_cspu_regul, P_cspu_win_cut + 0x000f, // P_des_shift_work + + 5, 215, + 0x023d, // P_adp_regul_cnt + 0x00a4, // P_adp_noise_cnt + 0x00a4, // P_adp_regul_ext + 0x7ff0, // P_adp_noise_ext + 0x3ccc, // P_adp_fil + + 1, 230, + 0x0000, // P_2d_byp_ti_num + + 1, 263, + 0x800, //P_equal_thres_wgn + + 1, 268, + (2 << 9) | 39, // P_equal_ctrl_synchro, P_equal_speedmode + + 1, 270, + 0x0001, // P_div_lock0_wait + 1, 285, + 0x0020, //p_fec_ + 1, 299, + 0x0062, /* P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard */ + + 1, 338, + (1 << 12) | // P_ctrl_corm_thres4pre_freq_inh=1 + (1 << 10) | + (0 << 9) | /* P_ctrl_pre_freq_inh=0 */ + (3 << 5) | /* P_ctrl_pre_freq_step=3 */ + (1 << 0), /* P_pre_freq_win_len=1 */ + + 0, +}; + +static u16 dib8000_identify(struct i2c_device *client) +{ + u16 value; + + //because of glitches sometimes + value = dib8000_i2c_read16(client, 896); + + if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) { + dprintk("wrong Vendor ID (read=0x%x)\n", value); + return 0; + } + + value = dib8000_i2c_read16(client, 897); + if (value != 0x8000 && value != 0x8001 && + value != 0x8002 && value != 0x8090) { + dprintk("wrong Device ID (%x)\n", value); + return 0; + } + + switch (value) { + case 0x8000: + dprintk("found DiB8000A\n"); + break; + case 0x8001: + dprintk("found DiB8000B\n"); + break; + case 0x8002: + dprintk("found DiB8000C\n"); + break; + case 0x8090: + dprintk("found DiB8096P\n"); + break; + } + return value; +} + +static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 *unc); + +static void dib8000_reset_stats(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + u32 ucb; + + memset(&c->strength, 0, sizeof(c->strength)); + memset(&c->cnr, 0, sizeof(c->cnr)); + memset(&c->post_bit_error, 0, sizeof(c->post_bit_error)); + memset(&c->post_bit_count, 0, sizeof(c->post_bit_count)); + memset(&c->block_error, 0, sizeof(c->block_error)); + + c->strength.len = 1; + c->cnr.len = 1; + c->block_error.len = 1; + c->block_count.len = 1; + c->post_bit_error.len = 1; + c->post_bit_count.len = 1; + + c->strength.stat[0].scale = FE_SCALE_DECIBEL; + c->strength.stat[0].uvalue = 0; + + c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + + dib8000_read_unc_blocks(fe, &ucb); + + state->init_ucb = -ucb; + state->ber_jiffies_stats = 0; + state->per_jiffies_stats = 0; + memset(&state->ber_jiffies_stats_layer, 0, + sizeof(state->ber_jiffies_stats_layer)); +} + +static int dib8000_reset(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + + if ((state->revision = dib8000_identify(&state->i2c)) == 0) + return -EINVAL; + + /* sram lead in, rdy */ + if (state->revision != 0x8090) + dib8000_write_word(state, 1287, 0x0003); + + if (state->revision == 0x8000) + dprintk("error : dib8000 MA not supported\n"); + + dibx000_reset_i2c_master(&state->i2c_master); + + dib8000_set_power_mode(state, DIB8000_POWER_ALL); + + /* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */ + dib8000_set_adc_state(state, DIBX000_ADC_OFF); + + /* restart all parts */ + dib8000_write_word(state, 770, 0xffff); + dib8000_write_word(state, 771, 0xffff); + dib8000_write_word(state, 772, 0xfffc); + dib8000_write_word(state, 898, 0x000c); /* restart sad */ + if (state->revision == 0x8090) + dib8000_write_word(state, 1280, 0x0045); + else + dib8000_write_word(state, 1280, 0x004d); + dib8000_write_word(state, 1281, 0x000c); + + dib8000_write_word(state, 770, 0x0000); + dib8000_write_word(state, 771, 0x0000); + dib8000_write_word(state, 772, 0x0000); + dib8000_write_word(state, 898, 0x0004); // sad + dib8000_write_word(state, 1280, 0x0000); + dib8000_write_word(state, 1281, 0x0000); + + /* drives */ + if (state->revision != 0x8090) { + if (state->cfg.drives) + dib8000_write_word(state, 906, state->cfg.drives); + else { + dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.\n"); + /* min drive SDRAM - not optimal - adjust */ + dib8000_write_word(state, 906, 0x2d98); + } + } + + dib8000_reset_pll(state); + if (state->revision != 0x8090) + dib8000_write_word(state, 898, 0x0004); + + if (dib8000_reset_gpio(state) != 0) + dprintk("GPIO reset was not successful.\n"); + + if ((state->revision != 0x8090) && + (dib8000_set_output_mode(fe, OUTMODE_HIGH_Z) != 0)) + dprintk("OUTPUT_MODE could not be reset.\n"); + + state->current_agc = NULL; + + // P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ... + /* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */ + if (state->cfg.pll->ifreq == 0) + dib8000_write_word(state, 40, 0x0755); /* P_iqc_corr_inh = 0 enable IQcorr block */ + else + dib8000_write_word(state, 40, 0x1f55); /* P_iqc_corr_inh = 1 disable IQcorr block */ + + { + u16 l = 0, r; + const u16 *n; + n = dib8000_defaults; + l = *n++; + while (l) { + r = *n++; + do { + dib8000_write_word(state, r, *n++); + r++; + } while (--l); + l = *n++; + } + } + + state->isdbt_cfg_loaded = 0; + + //div_cfg override for special configs + if ((state->revision != 8090) && (state->cfg.div_cfg != 0)) + dib8000_write_word(state, 903, state->cfg.div_cfg); + + /* unforce divstr regardless whether i2c enumeration was done or not */ + dib8000_write_word(state, 1285, dib8000_read_word(state, 1285) & ~(1 << 1)); + + dib8000_set_bandwidth(fe, 6000); + + dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON); + dib8000_sad_calib(state); + if (state->revision != 0x8090) + dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF); + + /* ber_rs_len = 3 */ + dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); + + dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY); + + dib8000_reset_stats(fe); + + return 0; +} + +static void dib8000_restart_agc(struct dib8000_state *state) +{ + // P_restart_iqc & P_restart_agc + dib8000_write_word(state, 770, 0x0a00); + dib8000_write_word(state, 770, 0x0000); +} + +static int dib8000_update_lna(struct dib8000_state *state) +{ + u16 dyn_gain; + + if (state->cfg.update_lna) { + // read dyn_gain here (because it is demod-dependent and not tuner) + dyn_gain = dib8000_read_word(state, 390); + + if (state->cfg.update_lna(state->fe[0], dyn_gain)) { + dib8000_restart_agc(state); + return 1; + } + } + return 0; +} + +static int dib8000_set_agc_config(struct dib8000_state *state, u8 band) +{ + struct dibx000_agc_config *agc = NULL; + int i; + u16 reg; + + if (state->current_band == band && state->current_agc != NULL) + return 0; + state->current_band = band; + + for (i = 0; i < state->cfg.agc_config_count; i++) + if (state->cfg.agc[i].band_caps & band) { + agc = &state->cfg.agc[i]; + break; + } + + if (agc == NULL) { + dprintk("no valid AGC configuration found for band 0x%02x\n", band); + return -EINVAL; + } + + state->current_agc = agc; + + /* AGC */ + dib8000_write_word(state, 76, agc->setup); + dib8000_write_word(state, 77, agc->inv_gain); + dib8000_write_word(state, 78, agc->time_stabiliz); + dib8000_write_word(state, 101, (agc->alpha_level << 12) | agc->thlock); + + // Demod AGC loop configuration + dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp); + dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp); + + dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d\n", + state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel); + + /* AGC continued */ + if (state->wbd_ref != 0) + dib8000_write_word(state, 106, state->wbd_ref); + else // use default + dib8000_write_word(state, 106, agc->wbd_ref); + + if (state->revision == 0x8090) { + reg = dib8000_read_word(state, 922) & (0x3 << 2); + dib8000_write_word(state, 922, reg | (agc->wbd_sel << 2)); + } + + dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8)); + dib8000_write_word(state, 108, agc->agc1_max); + dib8000_write_word(state, 109, agc->agc1_min); + dib8000_write_word(state, 110, agc->agc2_max); + dib8000_write_word(state, 111, agc->agc2_min); + dib8000_write_word(state, 112, (agc->agc1_pt1 << 8) | agc->agc1_pt2); + dib8000_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2); + dib8000_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2); + dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2); + + dib8000_write_word(state, 75, agc->agc1_pt3); + if (state->revision != 0x8090) + dib8000_write_word(state, 923, + (dib8000_read_word(state, 923) & 0xffe3) | + (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); + + return 0; +} + +static void dib8000_pwm_agc_reset(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + dib8000_set_adc_state(state, DIBX000_ADC_ON); + dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))); +} + +static int dib8000_agc_soft_split(struct dib8000_state *state) +{ + u16 agc, split_offset; + + if (!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0) + return 0; + + // n_agc_global + agc = dib8000_read_word(state, 390); + + if (agc > state->current_agc->split.min_thres) + split_offset = state->current_agc->split.min; + else if (agc < state->current_agc->split.max_thres) + split_offset = state->current_agc->split.max; + else + split_offset = state->current_agc->split.max * + (agc - state->current_agc->split.min_thres) / + (state->current_agc->split.max_thres - state->current_agc->split.min_thres); + + dprintk("AGC split_offset: %d\n", split_offset); + + // P_agc_force_split and P_agc_split_offset + dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset); + return 5000; +} + +static int dib8000_agc_startup(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + enum frontend_tune_state *tune_state = &state->tune_state; + int ret = 0; + u16 reg; + u32 upd_demod_gain_period = 0x8000; + + switch (*tune_state) { + case CT_AGC_START: + // set power-up level: interf+analog+AGC + + if (state->revision != 0x8090) + dib8000_set_adc_state(state, DIBX000_ADC_ON); + else { + dib8000_set_power_mode(state, DIB8000_POWER_ALL); + + reg = dib8000_read_word(state, 1947)&0xff00; + dib8000_write_word(state, 1946, + upd_demod_gain_period & 0xFFFF); + /* bit 14 = enDemodGain */ + dib8000_write_word(state, 1947, reg | (1<<14) | + ((upd_demod_gain_period >> 16) & 0xFF)); + + /* enable adc i & q */ + reg = dib8000_read_word(state, 1920); + dib8000_write_word(state, 1920, (reg | 0x3) & + (~(1 << 7))); + } + + if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) { + *tune_state = CT_AGC_STOP; + state->status = FE_STATUS_TUNE_FAILED; + break; + } + + ret = 70; + *tune_state = CT_AGC_STEP_0; + break; + + case CT_AGC_STEP_0: + //AGC initialization + if (state->cfg.agc_control) + state->cfg.agc_control(fe, 1); + + dib8000_restart_agc(state); + + // wait AGC rough lock time + ret = 50; + *tune_state = CT_AGC_STEP_1; + break; + + case CT_AGC_STEP_1: + // wait AGC accurate lock time + ret = 70; + + if (dib8000_update_lna(state)) + // wait only AGC rough lock time + ret = 50; + else + *tune_state = CT_AGC_STEP_2; + break; + + case CT_AGC_STEP_2: + dib8000_agc_soft_split(state); + + if (state->cfg.agc_control) + state->cfg.agc_control(fe, 0); + + *tune_state = CT_AGC_STOP; + break; + default: + ret = dib8000_agc_soft_split(state); + break; + } + return ret; + +} + +static void dib8096p_host_bus_drive(struct dib8000_state *state, u8 drive) +{ + u16 reg; + + drive &= 0x7; + + /* drive host bus 2, 3, 4 */ + reg = dib8000_read_word(state, 1798) & + ~(0x7 | (0x7 << 6) | (0x7 << 12)); + reg |= (drive<<12) | (drive<<6) | drive; + dib8000_write_word(state, 1798, reg); + + /* drive host bus 5,6 */ + reg = dib8000_read_word(state, 1799) & ~((0x7 << 2) | (0x7 << 8)); + reg |= (drive<<8) | (drive<<2); + dib8000_write_word(state, 1799, reg); + + /* drive host bus 7, 8, 9 */ + reg = dib8000_read_word(state, 1800) & + ~(0x7 | (0x7 << 6) | (0x7 << 12)); + reg |= (drive<<12) | (drive<<6) | drive; + dib8000_write_word(state, 1800, reg); + + /* drive host bus 10, 11 */ + reg = dib8000_read_word(state, 1801) & ~((0x7 << 2) | (0x7 << 8)); + reg |= (drive<<8) | (drive<<2); + dib8000_write_word(state, 1801, reg); + + /* drive host bus 12, 13, 14 */ + reg = dib8000_read_word(state, 1802) & + ~(0x7 | (0x7 << 6) | (0x7 << 12)); + reg |= (drive<<12) | (drive<<6) | drive; + dib8000_write_word(state, 1802, reg); +} + +static u32 dib8096p_calcSyncFreq(u32 P_Kin, u32 P_Kout, + u32 insertExtSynchro, u32 syncSize) +{ + u32 quantif = 3; + u32 nom = (insertExtSynchro * P_Kin+syncSize); + u32 denom = P_Kout; + u32 syncFreq = ((nom << quantif) / denom); + + if ((syncFreq & ((1 << quantif) - 1)) != 0) + syncFreq = (syncFreq >> quantif) + 1; + else + syncFreq = (syncFreq >> quantif); + + if (syncFreq != 0) + syncFreq = syncFreq - 1; + + return syncFreq; +} + +static void dib8096p_cfg_DibTx(struct dib8000_state *state, u32 P_Kin, + u32 P_Kout, u32 insertExtSynchro, u32 synchroMode, + u32 syncWord, u32 syncSize) +{ + dprintk("Configure DibStream Tx\n"); + + dib8000_write_word(state, 1615, 1); + dib8000_write_word(state, 1603, P_Kin); + dib8000_write_word(state, 1605, P_Kout); + dib8000_write_word(state, 1606, insertExtSynchro); + dib8000_write_word(state, 1608, synchroMode); + dib8000_write_word(state, 1609, (syncWord >> 16) & 0xffff); + dib8000_write_word(state, 1610, syncWord & 0xffff); + dib8000_write_word(state, 1612, syncSize); + dib8000_write_word(state, 1615, 0); +} + +static void dib8096p_cfg_DibRx(struct dib8000_state *state, u32 P_Kin, + u32 P_Kout, u32 synchroMode, u32 insertExtSynchro, + u32 syncWord, u32 syncSize, u32 dataOutRate) +{ + u32 syncFreq; + + dprintk("Configure DibStream Rx synchroMode = %d\n", synchroMode); + + if ((P_Kin != 0) && (P_Kout != 0)) { + syncFreq = dib8096p_calcSyncFreq(P_Kin, P_Kout, + insertExtSynchro, syncSize); + dib8000_write_word(state, 1542, syncFreq); + } + + dib8000_write_word(state, 1554, 1); + dib8000_write_word(state, 1536, P_Kin); + dib8000_write_word(state, 1537, P_Kout); + dib8000_write_word(state, 1539, synchroMode); + dib8000_write_word(state, 1540, (syncWord >> 16) & 0xffff); + dib8000_write_word(state, 1541, syncWord & 0xffff); + dib8000_write_word(state, 1543, syncSize); + dib8000_write_word(state, 1544, dataOutRate); + dib8000_write_word(state, 1554, 0); +} + +static void dib8096p_enMpegMux(struct dib8000_state *state, int onoff) +{ + u16 reg_1287; + + reg_1287 = dib8000_read_word(state, 1287); + + switch (onoff) { + case 1: + reg_1287 &= ~(1 << 8); + break; + case 0: + reg_1287 |= (1 << 8); + break; + } + + dib8000_write_word(state, 1287, reg_1287); +} + +static void dib8096p_configMpegMux(struct dib8000_state *state, + u16 pulseWidth, u16 enSerialMode, u16 enSerialClkDiv2) +{ + u16 reg_1287; + + dprintk("Enable Mpeg mux\n"); + + dib8096p_enMpegMux(state, 0); + + /* If the input mode is MPEG do not divide the serial clock */ + if ((enSerialMode == 1) && (state->input_mode_mpeg == 1)) + enSerialClkDiv2 = 0; + + reg_1287 = ((pulseWidth & 0x1f) << 3) | + ((enSerialMode & 0x1) << 2) | (enSerialClkDiv2 & 0x1); + dib8000_write_word(state, 1287, reg_1287); + + dib8096p_enMpegMux(state, 1); +} + +static void dib8096p_setDibTxMux(struct dib8000_state *state, int mode) +{ + u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 7); + + switch (mode) { + case MPEG_ON_DIBTX: + dprintk("SET MPEG ON DIBSTREAM TX\n"); + dib8096p_cfg_DibTx(state, 8, 5, 0, 0, 0, 0); + reg_1288 |= (1 << 9); break; + case DIV_ON_DIBTX: + dprintk("SET DIV_OUT ON DIBSTREAM TX\n"); + dib8096p_cfg_DibTx(state, 5, 5, 0, 0, 0, 0); + reg_1288 |= (1 << 8); break; + case ADC_ON_DIBTX: + dprintk("SET ADC_OUT ON DIBSTREAM TX\n"); + dib8096p_cfg_DibTx(state, 20, 5, 10, 0, 0, 0); + reg_1288 |= (1 << 7); break; + default: + break; + } + dib8000_write_word(state, 1288, reg_1288); +} + +static void dib8096p_setHostBusMux(struct dib8000_state *state, int mode) +{ + u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 4); + + switch (mode) { + case DEMOUT_ON_HOSTBUS: + dprintk("SET DEM OUT OLD INTERF ON HOST BUS\n"); + dib8096p_enMpegMux(state, 0); + reg_1288 |= (1 << 6); + break; + case DIBTX_ON_HOSTBUS: + dprintk("SET DIBSTREAM TX ON HOST BUS\n"); + dib8096p_enMpegMux(state, 0); + reg_1288 |= (1 << 5); + break; + case MPEG_ON_HOSTBUS: + dprintk("SET MPEG MUX ON HOST BUS\n"); + reg_1288 |= (1 << 4); + break; + default: + break; + } + dib8000_write_word(state, 1288, reg_1288); +} + +static int dib8096p_set_diversity_in(struct dvb_frontend *fe, int onoff) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 reg_1287; + + switch (onoff) { + case 0: /* only use the internal way - not the diversity input */ + dprintk("%s mode OFF : by default Enable Mpeg INPUT\n", + __func__); + /* outputRate = 8 */ + dib8096p_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0); + + /* Do not divide the serial clock of MPEG MUX in + SERIAL MODE in case input mode MPEG is used */ + reg_1287 = dib8000_read_word(state, 1287); + /* enSerialClkDiv2 == 1 ? */ + if ((reg_1287 & 0x1) == 1) { + /* force enSerialClkDiv2 = 0 */ + reg_1287 &= ~0x1; + dib8000_write_word(state, 1287, reg_1287); + } + state->input_mode_mpeg = 1; + break; + case 1: /* both ways */ + case 2: /* only the diversity input */ + dprintk("%s ON : Enable diversity INPUT\n", __func__); + dib8096p_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0); + state->input_mode_mpeg = 0; + break; + } + + dib8000_set_diversity_in(state->fe[0], onoff); + return 0; +} + +static int dib8096p_set_output_mode(struct dvb_frontend *fe, int mode) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 outreg, smo_mode, fifo_threshold; + u8 prefer_mpeg_mux_use = 1; + int ret = 0; + + state->output_mode = mode; + dib8096p_host_bus_drive(state, 1); + + fifo_threshold = 1792; + smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1); + outreg = dib8000_read_word(state, 1286) & + ~((1 << 10) | (0x7 << 6) | (1 << 1)); + + switch (mode) { + case OUTMODE_HIGH_Z: + outreg = 0; + break; + + case OUTMODE_MPEG2_SERIAL: + if (prefer_mpeg_mux_use) { + dprintk("dib8096P setting output mode TS_SERIAL using Mpeg Mux\n"); + dib8096p_configMpegMux(state, 3, 1, 1); + dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS); + } else {/* Use Smooth block */ + dprintk("dib8096P setting output mode TS_SERIAL using Smooth bloc\n"); + dib8096p_setHostBusMux(state, + DEMOUT_ON_HOSTBUS); + outreg |= (2 << 6) | (0 << 1); + } + break; + + case OUTMODE_MPEG2_PAR_GATED_CLK: + if (prefer_mpeg_mux_use) { + dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Mpeg Mux\n"); + dib8096p_configMpegMux(state, 2, 0, 0); + dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS); + } else { /* Use Smooth block */ + dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Smooth block\n"); + dib8096p_setHostBusMux(state, + DEMOUT_ON_HOSTBUS); + outreg |= (0 << 6); + } + break; + + case OUTMODE_MPEG2_PAR_CONT_CLK: /* Using Smooth block only */ + dprintk("dib8096P setting output mode TS_PARALLEL_CONT using Smooth block\n"); + dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (1 << 6); + break; + + case OUTMODE_MPEG2_FIFO: + /* Using Smooth block because not supported + by new Mpeg Mux bloc */ + dprintk("dib8096P setting output mode TS_FIFO using Smooth block\n"); + dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (5 << 6); + smo_mode |= (3 << 1); + fifo_threshold = 512; + break; + + case OUTMODE_DIVERSITY: + dprintk("dib8096P setting output mode MODE_DIVERSITY\n"); + dib8096p_setDibTxMux(state, DIV_ON_DIBTX); + dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); + break; + + case OUTMODE_ANALOG_ADC: + dprintk("dib8096P setting output mode MODE_ANALOG_ADC\n"); + dib8096p_setDibTxMux(state, ADC_ON_DIBTX); + dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); + break; + } + + if (mode != OUTMODE_HIGH_Z) + outreg |= (1<<10); + + dprintk("output_mpeg2_in_188_bytes = %d\n", + state->cfg.output_mpeg2_in_188_bytes); + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5); + + ret |= dib8000_write_word(state, 299, smo_mode); + /* synchronous fread */ + ret |= dib8000_write_word(state, 299 + 1, fifo_threshold); + ret |= dib8000_write_word(state, 1286, outreg); + + return ret; +} + +static int map_addr_to_serpar_number(struct i2c_msg *msg) +{ + if (msg->buf[0] <= 15) + msg->buf[0] -= 1; + else if (msg->buf[0] == 17) + msg->buf[0] = 15; + else if (msg->buf[0] == 16) + msg->buf[0] = 17; + else if (msg->buf[0] == 19) + msg->buf[0] = 16; + else if (msg->buf[0] >= 21 && msg->buf[0] <= 25) + msg->buf[0] -= 3; + else if (msg->buf[0] == 28) + msg->buf[0] = 23; + else if (msg->buf[0] == 99) + msg->buf[0] = 99; + else + return -EINVAL; + return 0; +} + +static int dib8096p_tuner_write_serpar(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u8 n_overflow = 1; + u16 i = 1000; + u16 serpar_num = msg[0].buf[0]; + + while (n_overflow == 1 && i) { + n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1; + i--; + if (i == 0) + dprintk("Tuner ITF: write busy (overflow)\n"); + } + dib8000_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f)); + dib8000_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]); + + return num; +} + +static int dib8096p_tuner_read_serpar(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u8 n_overflow = 1, n_empty = 1; + u16 i = 1000; + u16 serpar_num = msg[0].buf[0]; + u16 read_word; + + while (n_overflow == 1 && i) { + n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1; + i--; + if (i == 0) + dprintk("TunerITF: read busy (overflow)\n"); + } + dib8000_write_word(state, 1985, (0<<6) | (serpar_num&0x3f)); + + i = 1000; + while (n_empty == 1 && i) { + n_empty = dib8000_read_word(state, 1984)&0x1; + i--; + if (i == 0) + dprintk("TunerITF: read busy (empty)\n"); + } + + read_word = dib8000_read_word(state, 1987); + msg[1].buf[0] = (read_word >> 8) & 0xff; + msg[1].buf[1] = (read_word) & 0xff; + + return num; +} + +static int dib8096p_tuner_rw_serpar(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + if (map_addr_to_serpar_number(&msg[0]) == 0) { + if (num == 1) /* write */ + return dib8096p_tuner_write_serpar(i2c_adap, msg, 1); + else /* read */ + return dib8096p_tuner_read_serpar(i2c_adap, msg, 2); + } + return num; +} + +static int dib8096p_rw_on_apb(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num, u16 apb_address) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u16 word; + + if (num == 1) { /* write */ + dib8000_write_word(state, apb_address, + ((msg[0].buf[1] << 8) | (msg[0].buf[2]))); + } else { + word = dib8000_read_word(state, apb_address); + msg[1].buf[0] = (word >> 8) & 0xff; + msg[1].buf[1] = (word) & 0xff; + } + return num; +} + +static int dib8096p_tuner_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u16 apb_address = 0, word; + int i = 0; + + switch (msg[0].buf[0]) { + case 0x12: + apb_address = 1920; + break; + case 0x14: + apb_address = 1921; + break; + case 0x24: + apb_address = 1922; + break; + case 0x1a: + apb_address = 1923; + break; + case 0x22: + apb_address = 1924; + break; + case 0x33: + apb_address = 1926; + break; + case 0x34: + apb_address = 1927; + break; + case 0x35: + apb_address = 1928; + break; + case 0x36: + apb_address = 1929; + break; + case 0x37: + apb_address = 1930; + break; + case 0x38: + apb_address = 1931; + break; + case 0x39: + apb_address = 1932; + break; + case 0x2a: + apb_address = 1935; + break; + case 0x2b: + apb_address = 1936; + break; + case 0x2c: + apb_address = 1937; + break; + case 0x2d: + apb_address = 1938; + break; + case 0x2e: + apb_address = 1939; + break; + case 0x2f: + apb_address = 1940; + break; + case 0x30: + apb_address = 1941; + break; + case 0x31: + apb_address = 1942; + break; + case 0x32: + apb_address = 1943; + break; + case 0x3e: + apb_address = 1944; + break; + case 0x3f: + apb_address = 1945; + break; + case 0x40: + apb_address = 1948; + break; + case 0x25: + apb_address = 936; + break; + case 0x26: + apb_address = 937; + break; + case 0x27: + apb_address = 938; + break; + case 0x28: + apb_address = 939; + break; + case 0x1d: + /* get sad sel request */ + i = ((dib8000_read_word(state, 921) >> 12)&0x3); + word = dib8000_read_word(state, 924+i); + msg[1].buf[0] = (word >> 8) & 0xff; + msg[1].buf[1] = (word) & 0xff; + return num; + case 0x1f: + if (num == 1) { /* write */ + word = (u16) ((msg[0].buf[1] << 8) | + msg[0].buf[2]); + /* in the VGAMODE Sel are located on bit 0/1 */ + word &= 0x3; + word = (dib8000_read_word(state, 921) & + ~(3<<12)) | (word<<12); + /* Set the proper input */ + dib8000_write_word(state, 921, word); + return num; + } + } + + if (apb_address != 0) /* R/W access via APB */ + return dib8096p_rw_on_apb(i2c_adap, msg, num, apb_address); + else /* R/W access via SERPAR */ + return dib8096p_tuner_rw_serpar(i2c_adap, msg, num); + + return 0; +} + +static u32 dib8096p_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static const struct i2c_algorithm dib8096p_tuner_xfer_algo = { + .master_xfer = dib8096p_tuner_xfer, + .functionality = dib8096p_i2c_func, +}; + +static struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe) +{ + struct dib8000_state *st = fe->demodulator_priv; + return &st->dib8096p_tuner_adap; +} + +static int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 en_cur_state; + + dprintk("sleep dib8096p: %d\n", onoff); + + en_cur_state = dib8000_read_word(state, 1922); + + /* LNAs and MIX are ON and therefore it is a valid configuration */ + if (en_cur_state > 0xff) + state->tuner_enable = en_cur_state ; + + if (onoff) + en_cur_state &= 0x00ff; + else { + if (state->tuner_enable != 0) + en_cur_state = state->tuner_enable; + } + + dib8000_write_word(state, 1922, en_cur_state); + + return 0; +} + +static const s32 lut_1000ln_mant[] = +{ + 908, 7003, 7090, 7170, 7244, 7313, 7377, 7438, 7495, 7549, 7600 +}; + +static s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode) +{ + struct dib8000_state *state = fe->demodulator_priv; + u32 ix = 0, tmp_val = 0, exp = 0, mant = 0; + s32 val; + + val = dib8000_read32(state, 384); + if (mode) { + tmp_val = val; + while (tmp_val >>= 1) + exp++; + mant = (val * 1000 / (1<<exp)); + ix = (u8)((mant-1000)/100); /* index of the LUT */ + val = (lut_1000ln_mant[ix] + 693*(exp-20) - 6908); + val = (val*256)/1000; + } + return val; +} + +static int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ) +{ + struct dib8000_state *state = fe->demodulator_priv; + int val = 0; + + switch (IQ) { + case 1: + val = dib8000_read_word(state, 403); + break; + case 0: + val = dib8000_read_word(state, 404); + break; + } + if (val & 0x200) + val -= 1024; + + return val; +} + +static void dib8000_update_timf(struct dib8000_state *state) +{ + u32 timf = state->timf = dib8000_read32(state, 435); + + dib8000_write_word(state, 29, (u16) (timf >> 16)); + dib8000_write_word(state, 30, (u16) (timf & 0xffff)); + dprintk("Updated timing frequency: %d (default: %d)\n", state->timf, state->timf_default); +} + +static u32 dib8000_ctrl_timf(struct dvb_frontend *fe, uint8_t op, uint32_t timf) +{ + struct dib8000_state *state = fe->demodulator_priv; + + switch (op) { + case DEMOD_TIMF_SET: + state->timf = timf; + break; + case DEMOD_TIMF_UPDATE: + dib8000_update_timf(state); + break; + case DEMOD_TIMF_GET: + break; + } + dib8000_set_bandwidth(state->fe[0], 6000); + + return state->timf; +} + +static const u16 adc_target_16dB[11] = { + 7250, 7238, 7264, 7309, 7338, 7382, 7427, 7456, 7500, 7544, 7574 +}; + +static const u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 }; + +static u16 dib8000_set_layer(struct dib8000_state *state, u8 layer_index, u16 max_constellation) +{ + u8 cr, constellation, time_intlv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + + switch (c->layer[layer_index].modulation) { + case DQPSK: + constellation = 0; + break; + case QPSK: + constellation = 1; + break; + case QAM_16: + constellation = 2; + break; + case QAM_64: + default: + constellation = 3; + break; + } + + switch (c->layer[layer_index].fec) { + case FEC_1_2: + cr = 1; + break; + case FEC_2_3: + cr = 2; + break; + case FEC_3_4: + cr = 3; + break; + case FEC_5_6: + cr = 5; + break; + case FEC_7_8: + default: + cr = 7; + break; + } + + time_intlv = fls(c->layer[layer_index].interleaving); + if (time_intlv > 3 && !(time_intlv == 4 && c->isdbt_sb_mode == 1)) + time_intlv = 0; + + dib8000_write_word(state, 2 + layer_index, (constellation << 10) | ((c->layer[layer_index].segment_count & 0xf) << 6) | (cr << 3) | time_intlv); + if (c->layer[layer_index].segment_count > 0) { + switch (max_constellation) { + case DQPSK: + case QPSK: + if (c->layer[layer_index].modulation == QAM_16 || c->layer[layer_index].modulation == QAM_64) + max_constellation = c->layer[layer_index].modulation; + break; + case QAM_16: + if (c->layer[layer_index].modulation == QAM_64) + max_constellation = c->layer[layer_index].modulation; + break; + } + } + + return max_constellation; +} + +static const u16 adp_Q64[4] = {0x0148, 0xfff0, 0x00a4, 0xfff8}; /* P_adp_regul_cnt 0.04, P_adp_noise_cnt -0.002, P_adp_regul_ext 0.02, P_adp_noise_ext -0.001 */ +static const u16 adp_Q16[4] = {0x023d, 0xffdf, 0x00a4, 0xfff0}; /* P_adp_regul_cnt 0.07, P_adp_noise_cnt -0.004, P_adp_regul_ext 0.02, P_adp_noise_ext -0.002 */ +static const u16 adp_Qdefault[4] = {0x099a, 0xffae, 0x0333, 0xfff8}; /* P_adp_regul_cnt 0.3, P_adp_noise_cnt -0.01, P_adp_regul_ext 0.1, P_adp_noise_ext -0.002 */ +static u16 dib8000_adp_fine_tune(struct dib8000_state *state, u16 max_constellation) +{ + u16 i, ana_gain = 0; + const u16 *adp; + + /* channel estimation fine configuration */ + switch (max_constellation) { + case QAM_64: + ana_gain = 0x7; + adp = &adp_Q64[0]; + break; + case QAM_16: + ana_gain = 0x7; + adp = &adp_Q16[0]; + break; + default: + ana_gain = 0; + adp = &adp_Qdefault[0]; + break; + } + + for (i = 0; i < 4; i++) + dib8000_write_word(state, 215 + i, adp[i]); + + return ana_gain; +} + +static void dib8000_update_ana_gain(struct dib8000_state *state, u16 ana_gain) +{ + u16 i; + + dib8000_write_word(state, 116, ana_gain); + + /* update ADC target depending on ana_gain */ + if (ana_gain) { /* set -16dB ADC target for ana_gain=-1 */ + for (i = 0; i < 10; i++) + dib8000_write_word(state, 80 + i, adc_target_16dB[i]); + } else { /* set -22dB ADC target for ana_gain=0 */ + for (i = 0; i < 10; i++) + dib8000_write_word(state, 80 + i, adc_target_16dB[i] - 355); + } +} + +static void dib8000_load_ana_fe_coefs(struct dib8000_state *state, const s16 *ana_fe) +{ + u16 mode = 0; + + if (state->isdbt_cfg_loaded == 0) + for (mode = 0; mode < 24; mode++) + dib8000_write_word(state, 117 + mode, ana_fe[mode]); +} + +static const u16 lut_prbs_2k[13] = { + 0x423, 0x009, 0x5C7, + 0x7A6, 0x3D8, 0x527, + 0x7FF, 0x79B, 0x3D6, + 0x3A2, 0x53B, 0x2F4, + 0x213 +}; + +static const u16 lut_prbs_4k[13] = { + 0x208, 0x0C3, 0x7B9, + 0x423, 0x5C7, 0x3D8, + 0x7FF, 0x3D6, 0x53B, + 0x213, 0x029, 0x0D0, + 0x48E +}; + +static const u16 lut_prbs_8k[13] = { + 0x740, 0x069, 0x7DD, + 0x208, 0x7B9, 0x5C7, + 0x7FF, 0x53B, 0x029, + 0x48E, 0x4C4, 0x367, + 0x684 +}; + +static u16 dib8000_get_init_prbs(struct dib8000_state *state, u16 subchannel) +{ + int sub_channel_prbs_group = 0; + int prbs_group; + + sub_channel_prbs_group = subchannel / 3; + if (sub_channel_prbs_group >= ARRAY_SIZE(lut_prbs_2k)) + return 0; + + switch (state->fe[0]->dtv_property_cache.transmission_mode) { + case TRANSMISSION_MODE_2K: + prbs_group = lut_prbs_2k[sub_channel_prbs_group]; + break; + case TRANSMISSION_MODE_4K: + prbs_group = lut_prbs_4k[sub_channel_prbs_group]; + break; + default: + case TRANSMISSION_MODE_8K: + prbs_group = lut_prbs_8k[sub_channel_prbs_group]; + } + + dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x\n", + sub_channel_prbs_group, subchannel, prbs_group); + + return prbs_group; +} + +static void dib8000_set_13seg_channel(struct dib8000_state *state) +{ + u16 i; + u16 coff_pow = 0x2800; + + state->seg_mask = 0x1fff; /* All 13 segments enabled */ + + /* ---- COFF ---- Carloff, the most robust --- */ + if (state->isdbt_cfg_loaded == 0) { /* if not Sound Broadcasting mode : put default values for 13 segments */ + dib8000_write_word(state, 180, (16 << 6) | 9); + dib8000_write_word(state, 187, (4 << 12) | (8 << 5) | 0x2); + coff_pow = 0x2800; + for (i = 0; i < 6; i++) + dib8000_write_word(state, 181+i, coff_pow); + + /* P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1 */ + /* P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1 */ + dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1); + + /* P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6 */ + dib8000_write_word(state, 340, (8 << 6) | (6 << 0)); + /* P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1 */ + dib8000_write_word(state, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0)); + + dib8000_write_word(state, 228, 0); /* default value */ + dib8000_write_word(state, 265, 31); /* default value */ + dib8000_write_word(state, 205, 0x200f); /* init value */ + } + + /* + * make the cpil_coff_lock more robust but slower p_coff_winlen + * 6bits; p_coff_thres_lock 6bits (for coff lock if needed) + */ + + if (state->cfg.pll->ifreq == 0) + dib8000_write_word(state, 266, ~state->seg_mask | state->seg_diff_mask | 0x40); /* P_equal_noise_seg_inh */ + + dib8000_load_ana_fe_coefs(state, ana_fe_coeff_13seg); +} + +static void dib8000_set_subchannel_prbs(struct dib8000_state *state, u16 init_prbs) +{ + u16 reg_1; + + reg_1 = dib8000_read_word(state, 1); + dib8000_write_word(state, 1, (init_prbs << 2) | (reg_1 & 0x3)); /* ADDR 1 */ +} + +static void dib8000_small_fine_tune(struct dib8000_state *state) +{ + u16 i; + const s16 *ncoeff; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + + dib8000_write_word(state, 352, state->seg_diff_mask); + dib8000_write_word(state, 353, state->seg_mask); + + /* P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5 */ + dib8000_write_word(state, 351, (c->isdbt_sb_mode << 9) | (c->isdbt_sb_mode << 8) | (13 << 4) | 5); + + if (c->isdbt_sb_mode) { + /* ---- SMALL ---- */ + switch (c->transmission_mode) { + case TRANSMISSION_MODE_2K: + if (c->isdbt_partial_reception == 0) { /* 1-seg */ + if (c->layer[0].modulation == DQPSK) /* DQPSK */ + ncoeff = coeff_2k_sb_1seg_dqpsk; + else /* QPSK or QAM */ + ncoeff = coeff_2k_sb_1seg; + } else { /* 3-segments */ + if (c->layer[0].modulation == DQPSK) { /* DQPSK on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_2k_sb_3seg_0dqpsk_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_2k_sb_3seg_0dqpsk; + } else { /* QPSK or QAM on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_2k_sb_3seg_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_2k_sb_3seg; + } + } + break; + case TRANSMISSION_MODE_4K: + if (c->isdbt_partial_reception == 0) { /* 1-seg */ + if (c->layer[0].modulation == DQPSK) /* DQPSK */ + ncoeff = coeff_4k_sb_1seg_dqpsk; + else /* QPSK or QAM */ + ncoeff = coeff_4k_sb_1seg; + } else { /* 3-segments */ + if (c->layer[0].modulation == DQPSK) { /* DQPSK on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_4k_sb_3seg_0dqpsk_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_4k_sb_3seg_0dqpsk; + } else { /* QPSK or QAM on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_4k_sb_3seg_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_4k_sb_3seg; + } + } + break; + case TRANSMISSION_MODE_AUTO: + case TRANSMISSION_MODE_8K: + default: + if (c->isdbt_partial_reception == 0) { /* 1-seg */ + if (c->layer[0].modulation == DQPSK) /* DQPSK */ + ncoeff = coeff_8k_sb_1seg_dqpsk; + else /* QPSK or QAM */ + ncoeff = coeff_8k_sb_1seg; + } else { /* 3-segments */ + if (c->layer[0].modulation == DQPSK) { /* DQPSK on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_8k_sb_3seg_0dqpsk_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_8k_sb_3seg_0dqpsk; + } else { /* QPSK or QAM on central segment */ + if (c->layer[1].modulation == DQPSK) /* DQPSK on external segments */ + ncoeff = coeff_8k_sb_3seg_1dqpsk; + else /* QPSK or QAM on external segments */ + ncoeff = coeff_8k_sb_3seg; + } + } + break; + } + + for (i = 0; i < 8; i++) + dib8000_write_word(state, 343 + i, ncoeff[i]); + } +} + +static const u16 coff_thres_1seg[3] = {300, 150, 80}; +static const u16 coff_thres_3seg[3] = {350, 300, 250}; +static void dib8000_set_sb_channel(struct dib8000_state *state) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + const u16 *coff; + u16 i; + + if (c->transmission_mode == TRANSMISSION_MODE_2K || c->transmission_mode == TRANSMISSION_MODE_4K) { + dib8000_write_word(state, 219, dib8000_read_word(state, 219) | 0x1); /* adp_pass =1 */ + dib8000_write_word(state, 190, dib8000_read_word(state, 190) | (0x1 << 14)); /* pha3_force_pha_shift = 1 */ + } else { + dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); /* adp_pass =0 */ + dib8000_write_word(state, 190, dib8000_read_word(state, 190) & 0xbfff); /* pha3_force_pha_shift = 0 */ + } + + if (c->isdbt_partial_reception == 1) /* 3-segments */ + state->seg_mask = 0x00E0; + else /* 1-segment */ + state->seg_mask = 0x0040; + + dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200); + + /* ---- COFF ---- Carloff, the most robust --- */ + /* P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64, P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1 */ + dib8000_write_word(state, 187, (4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~c->isdbt_partial_reception & 1) << 2) | 0x3); + + dib8000_write_word(state, 340, (16 << 6) | (8 << 0)); /* P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8 */ + dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));/* P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1 */ + + /* Sound Broadcasting mode 1 seg */ + if (c->isdbt_partial_reception == 0) { + /* P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width = (P_mode == 3) , P_coff_one_seg_sym = (P_mode-1) */ + if (state->mode == 3) + dib8000_write_word(state, 180, 0x1fcf | ((state->mode - 1) << 14)); + else + dib8000_write_word(state, 180, 0x0fcf | ((state->mode - 1) << 14)); + + /* P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4 */ + dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4); + coff = &coff_thres_1seg[0]; + } else { /* Sound Broadcasting mode 3 seg */ + dib8000_write_word(state, 180, 0x1fcf | (1 << 14)); + /* P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4 */ + dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4); + coff = &coff_thres_3seg[0]; + } + + dib8000_write_word(state, 228, 1); /* P_2d_mode_byp=1 */ + dib8000_write_word(state, 205, dib8000_read_word(state, 205) & 0xfff0); /* P_cspu_win_cut = 0 */ + + if (c->isdbt_partial_reception == 0 && c->transmission_mode == TRANSMISSION_MODE_2K) + dib8000_write_word(state, 265, 15); /* P_equal_noise_sel = 15 */ + + /* Write COFF thres */ + for (i = 0 ; i < 3; i++) { + dib8000_write_word(state, 181+i, coff[i]); + dib8000_write_word(state, 184+i, coff[i]); + } + + /* + * make the cpil_coff_lock more robust but slower p_coff_winlen + * 6bits; p_coff_thres_lock 6bits (for coff lock if needed) + */ + + dib8000_write_word(state, 266, ~state->seg_mask | state->seg_diff_mask); /* P_equal_noise_seg_inh */ + + if (c->isdbt_partial_reception == 0) + dib8000_write_word(state, 178, 64); /* P_fft_powrange = 64 */ + else + dib8000_write_word(state, 178, 32); /* P_fft_powrange = 32 */ +} + +static void dib8000_set_isdbt_common_channel(struct dib8000_state *state, u8 seq, u8 autosearching) +{ + u16 p_cfr_left_edge = 0, p_cfr_right_edge = 0; + u16 tmcc_pow = 0, ana_gain = 0, tmp = 0, i = 0, nbseg_diff = 0 ; + u16 max_constellation = DQPSK; + int init_prbs; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + + if (autosearching) + c->isdbt_partial_reception = 1; + + /* P_mode */ + dib8000_write_word(state, 10, (seq << 4)); + + /* init mode */ + state->mode = fft_to_mode(state); + + /* set guard */ + tmp = dib8000_read_word(state, 1); + dib8000_write_word(state, 1, (tmp&0xfffc) | (c->guard_interval & 0x3)); + + dib8000_write_word(state, 274, (dib8000_read_word(state, 274) & 0xffcf) | ((c->isdbt_partial_reception & 1) << 5) | ((c->isdbt_sb_mode & 1) << 4)); + + /* signal optimization parameter */ + if (c->isdbt_partial_reception) { + state->seg_diff_mask = (c->layer[0].modulation == DQPSK) << permu_seg[0]; + for (i = 1; i < 3; i++) + nbseg_diff += (c->layer[i].modulation == DQPSK) * c->layer[i].segment_count; + for (i = 0; i < nbseg_diff; i++) + state->seg_diff_mask |= 1 << permu_seg[i+1]; + } else { + for (i = 0; i < 3; i++) + nbseg_diff += (c->layer[i].modulation == DQPSK) * c->layer[i].segment_count; + for (i = 0; i < nbseg_diff; i++) + state->seg_diff_mask |= 1 << permu_seg[i]; + } + + if (state->seg_diff_mask) + dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200); + else + dib8000_write_word(state, 268, (2 << 9) | 39); /*init value */ + + for (i = 0; i < 3; i++) + max_constellation = dib8000_set_layer(state, i, max_constellation); + if (autosearching == 0) { + state->layer_b_nb_seg = c->layer[1].segment_count; + state->layer_c_nb_seg = c->layer[2].segment_count; + } + + /* WRITE: Mode & Diff mask */ + dib8000_write_word(state, 0, (state->mode << 13) | state->seg_diff_mask); + + state->differential_constellation = (state->seg_diff_mask != 0); + + /* channel estimation fine configuration */ + ana_gain = dib8000_adp_fine_tune(state, max_constellation); + + /* update ana_gain depending on max constellation */ + dib8000_update_ana_gain(state, ana_gain); + + /* ---- ANA_FE ---- */ + if (c->isdbt_partial_reception) /* 3-segments */ + dib8000_load_ana_fe_coefs(state, ana_fe_coeff_3seg); + else + dib8000_load_ana_fe_coefs(state, ana_fe_coeff_1seg); /* 1-segment */ + + /* TSB or ISDBT ? apply it now */ + if (c->isdbt_sb_mode) { + dib8000_set_sb_channel(state); + init_prbs = dib8000_get_init_prbs(state, + c->isdbt_sb_subchannel); + } else { + dib8000_set_13seg_channel(state); + init_prbs = 0xfff; + } + + /* SMALL */ + dib8000_small_fine_tune(state); + + dib8000_set_subchannel_prbs(state, init_prbs); + + /* ---- CHAN_BLK ---- */ + for (i = 0; i < 13; i++) { + if ((((~state->seg_diff_mask) >> i) & 1) == 1) { + p_cfr_left_edge += (1 << i) * ((i == 0) || ((((state->seg_mask & (~state->seg_diff_mask)) >> (i - 1)) & 1) == 0)); + p_cfr_right_edge += (1 << i) * ((i == 12) || ((((state->seg_mask & (~state->seg_diff_mask)) >> (i + 1)) & 1) == 0)); + } + } + dib8000_write_word(state, 222, p_cfr_left_edge); /* p_cfr_left_edge */ + dib8000_write_word(state, 223, p_cfr_right_edge); /* p_cfr_right_edge */ + /* "P_cspu_left_edge" & "P_cspu_right_edge" not used => do not care */ + + dib8000_write_word(state, 189, ~state->seg_mask | state->seg_diff_mask); /* P_lmod4_seg_inh */ + dib8000_write_word(state, 192, ~state->seg_mask | state->seg_diff_mask); /* P_pha3_seg_inh */ + dib8000_write_word(state, 225, ~state->seg_mask | state->seg_diff_mask); /* P_tac_seg_inh */ + + if (!autosearching) + dib8000_write_word(state, 288, (~state->seg_mask | state->seg_diff_mask) & 0x1fff); /* P_tmcc_seg_eq_inh */ + else + dib8000_write_word(state, 288, 0x1fff); /*disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels. */ + + dib8000_write_word(state, 211, state->seg_mask & (~state->seg_diff_mask)); /* P_des_seg_enabled */ + dib8000_write_word(state, 287, ~state->seg_mask | 0x1000); /* P_tmcc_seg_inh */ + + dib8000_write_word(state, 178, 32); /* P_fft_powrange = 32 */ + + /* ---- TMCC ---- */ + for (i = 0; i < 3; i++) + tmcc_pow += (((c->layer[i].modulation == DQPSK) * 4 + 1) * c->layer[i].segment_count) ; + + /* Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9); */ + /* Threshold is set at 1/4 of max power. */ + tmcc_pow *= (1 << (9-2)); + dib8000_write_word(state, 290, tmcc_pow); /* P_tmcc_dec_thres_2k */ + dib8000_write_word(state, 291, tmcc_pow); /* P_tmcc_dec_thres_4k */ + dib8000_write_word(state, 292, tmcc_pow); /* P_tmcc_dec_thres_8k */ + /*dib8000_write_word(state, 287, (1 << 13) | 0x1000 ); */ + + /* ---- PHA3 ---- */ + if (state->isdbt_cfg_loaded == 0) + dib8000_write_word(state, 250, 3285); /* p_2d_hspeed_thr0 */ + + state->isdbt_cfg_loaded = 0; +} + +static u32 dib8000_wait_lock(struct dib8000_state *state, u32 internal, + u32 wait0_ms, u32 wait1_ms, u32 wait2_ms) +{ + u32 value = 0; /* P_search_end0 wait time */ + u16 reg = 11; /* P_search_end0 start addr */ + + for (reg = 11; reg < 16; reg += 2) { + if (reg == 11) { + if (state->revision == 0x8090) + value = internal * wait1_ms; + else + value = internal * wait0_ms; + } else if (reg == 13) + value = internal * wait1_ms; + else if (reg == 15) + value = internal * wait2_ms; + dib8000_write_word(state, reg, (u16)((value >> 16) & 0xffff)); + dib8000_write_word(state, (reg + 1), (u16)(value & 0xffff)); + } + return value; +} + +static int dib8000_autosearch_start(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + u8 slist = 0; + u32 value, internal = state->cfg.pll->internal; + + if (state->revision == 0x8090) + internal = dib8000_read32(state, 23) / 1000; + + if ((state->revision >= 0x8002) && + (state->autosearch_state == AS_SEARCHING_FFT)) { + dib8000_write_word(state, 37, 0x0065); /* P_ctrl_pha_off_max default values */ + dib8000_write_word(state, 116, 0x0000); /* P_ana_gain to 0 */ + + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x1fff) | (0 << 13) | (1 << 15)); /* P_mode = 0, P_restart_search=1 */ + dib8000_write_word(state, 1, (dib8000_read_word(state, 1) & 0xfffc) | 0); /* P_guard = 0 */ + dib8000_write_word(state, 6, 0); /* P_lock0_mask = 0 */ + dib8000_write_word(state, 7, 0); /* P_lock1_mask = 0 */ + dib8000_write_word(state, 8, 0); /* P_lock2_mask = 0 */ + dib8000_write_word(state, 10, (dib8000_read_word(state, 10) & 0x200) | (16 << 4) | (0 << 0)); /* P_search_list=16, P_search_maxtrial=0 */ + + if (state->revision == 0x8090) + value = dib8000_wait_lock(state, internal, 10, 10, 10); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + else + value = dib8000_wait_lock(state, internal, 20, 20, 20); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + + dib8000_write_word(state, 17, 0); + dib8000_write_word(state, 18, 200); /* P_search_rstst = 200 */ + dib8000_write_word(state, 19, 0); + dib8000_write_word(state, 20, 400); /* P_search_rstend = 400 */ + dib8000_write_word(state, 21, (value >> 16) & 0xffff); /* P_search_checkst */ + dib8000_write_word(state, 22, value & 0xffff); + + if (state->revision == 0x8090) + dib8000_write_word(state, 32, (dib8000_read_word(state, 32) & 0xf0ff) | (0 << 8)); /* P_corm_alpha = 0 */ + else + dib8000_write_word(state, 32, (dib8000_read_word(state, 32) & 0xf0ff) | (9 << 8)); /* P_corm_alpha = 3 */ + dib8000_write_word(state, 355, 2); /* P_search_param_max = 2 */ + + /* P_search_param_select = (1 | 1<<4 | 1 << 8) */ + dib8000_write_word(state, 356, 0); + dib8000_write_word(state, 357, 0x111); + + dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (1 << 13)); /* P_restart_ccg = 1 */ + dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (0 << 13)); /* P_restart_ccg = 0 */ + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x7ff) | (0 << 15) | (1 << 13)); /* P_restart_search = 0; */ + } else if ((state->revision >= 0x8002) && + (state->autosearch_state == AS_SEARCHING_GUARD)) { + c->transmission_mode = TRANSMISSION_MODE_8K; + c->guard_interval = GUARD_INTERVAL_1_8; + c->inversion = 0; + c->layer[0].modulation = QAM_64; + c->layer[0].fec = FEC_2_3; + c->layer[0].interleaving = 0; + c->layer[0].segment_count = 13; + + slist = 16; + c->transmission_mode = state->found_nfft; + + dib8000_set_isdbt_common_channel(state, slist, 1); + + /* set lock_mask values */ + dib8000_write_word(state, 6, 0x4); + if (state->revision == 0x8090) + dib8000_write_word(state, 7, ((1 << 12) | (1 << 11) | (1 << 10)));/* tmcc_dec_lock, tmcc_sync_lock, tmcc_data_lock, tmcc_bch_uncor */ + else + dib8000_write_word(state, 7, 0x8); + dib8000_write_word(state, 8, 0x1000); + + /* set lock_mask wait time values */ + if (state->revision == 0x8090) + dib8000_wait_lock(state, internal, 50, 100, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + else + dib8000_wait_lock(state, internal, 50, 200, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + + dib8000_write_word(state, 355, 3); /* P_search_param_max = 3 */ + + /* P_search_param_select = 0xf; look for the 4 different guard intervals */ + dib8000_write_word(state, 356, 0); + dib8000_write_word(state, 357, 0xf); + + value = dib8000_read_word(state, 0); + dib8000_write_word(state, 0, (u16)((1 << 15) | value)); + dib8000_read_word(state, 1284); /* reset the INT. n_irq_pending */ + dib8000_write_word(state, 0, (u16)value); + } else { + c->inversion = 0; + c->layer[0].modulation = QAM_64; + c->layer[0].fec = FEC_2_3; + c->layer[0].interleaving = 0; + c->layer[0].segment_count = 13; + if (!c->isdbt_sb_mode) + c->layer[0].segment_count = 13; + + /* choose the right list, in sb, always do everything */ + if (c->isdbt_sb_mode) { + slist = 7; + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); + } else { + if (c->guard_interval == GUARD_INTERVAL_AUTO) { + if (c->transmission_mode == TRANSMISSION_MODE_AUTO) { + c->transmission_mode = TRANSMISSION_MODE_8K; + c->guard_interval = GUARD_INTERVAL_1_8; + slist = 7; + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); /* P_mode = 1 to have autosearch start ok with mode2 */ + } else { + c->guard_interval = GUARD_INTERVAL_1_8; + slist = 3; + } + } else { + if (c->transmission_mode == TRANSMISSION_MODE_AUTO) { + c->transmission_mode = TRANSMISSION_MODE_8K; + slist = 2; + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); /* P_mode = 1 */ + } else + slist = 0; + } + } + dprintk("Using list for autosearch : %d\n", slist); + + dib8000_set_isdbt_common_channel(state, slist, 1); + + /* set lock_mask values */ + dib8000_write_word(state, 6, 0x4); + if (state->revision == 0x8090) + dib8000_write_word(state, 7, (1 << 12) | (1 << 11) | (1 << 10)); + else + dib8000_write_word(state, 7, 0x8); + dib8000_write_word(state, 8, 0x1000); + + /* set lock_mask wait time values */ + if (state->revision == 0x8090) + dib8000_wait_lock(state, internal, 50, 200, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + else + dib8000_wait_lock(state, internal, 50, 100, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */ + + value = dib8000_read_word(state, 0); + dib8000_write_word(state, 0, (u16)((1 << 15) | value)); + dib8000_read_word(state, 1284); /* reset the INT. n_irq_pending */ + dib8000_write_word(state, 0, (u16)value); + } + return 0; +} + +static int dib8000_autosearch_irq(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 irq_pending = dib8000_read_word(state, 1284); + + if ((state->revision >= 0x8002) && + (state->autosearch_state == AS_SEARCHING_FFT)) { + if (irq_pending & 0x1) { + dprintk("dib8000_autosearch_irq: max correlation result available\n"); + return 3; + } + } else { + if (irq_pending & 0x1) { /* failed */ + dprintk("dib8000_autosearch_irq failed\n"); + return 1; + } + + if (irq_pending & 0x2) { /* succeeded */ + dprintk("dib8000_autosearch_irq succeeded\n"); + return 2; + } + } + + return 0; // still pending +} + +static void dib8000_viterbi_state(struct dib8000_state *state, u8 onoff) +{ + u16 tmp; + + tmp = dib8000_read_word(state, 771); + if (onoff) /* start P_restart_chd : channel_decoder */ + dib8000_write_word(state, 771, tmp & 0xfffd); + else /* stop P_restart_chd : channel_decoder */ + dib8000_write_word(state, 771, tmp | (1<<1)); +} + +static void dib8000_set_dds(struct dib8000_state *state, s32 offset_khz) +{ + s16 unit_khz_dds_val; + u32 abs_offset_khz = abs(offset_khz); + u32 dds = state->cfg.pll->ifreq & 0x1ffffff; + u8 invert = !!(state->cfg.pll->ifreq & (1 << 25)); + u8 ratio; + + if (state->revision == 0x8090) { + ratio = 4; + unit_khz_dds_val = (1<<26) / (dib8000_read32(state, 23) / 1000); + if (offset_khz < 0) + dds = (1 << 26) - (abs_offset_khz * unit_khz_dds_val); + else + dds = (abs_offset_khz * unit_khz_dds_val); + + if (invert) + dds = (1<<26) - dds; + } else { + ratio = 2; + unit_khz_dds_val = (u16) (67108864 / state->cfg.pll->internal); + + if (offset_khz < 0) + unit_khz_dds_val *= -1; + + /* IF tuner */ + if (invert) + dds -= abs_offset_khz * unit_khz_dds_val; + else + dds += abs_offset_khz * unit_khz_dds_val; + } + + dprintk("setting a DDS frequency offset of %c%dkHz\n", invert ? '-' : ' ', dds / unit_khz_dds_val); + + if (abs_offset_khz <= (state->cfg.pll->internal / ratio)) { + /* Max dds offset is the half of the demod freq */ + dib8000_write_word(state, 26, invert); + dib8000_write_word(state, 27, (u16)(dds >> 16) & 0x1ff); + dib8000_write_word(state, 28, (u16)(dds & 0xffff)); + } +} + +static void dib8000_set_frequency_offset(struct dib8000_state *state) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + int i; + u32 current_rf; + int total_dds_offset_khz; + + if (state->fe[0]->ops.tuner_ops.get_frequency) + state->fe[0]->ops.tuner_ops.get_frequency(state->fe[0], ¤t_rf); + else + current_rf = c->frequency; + current_rf /= 1000; + total_dds_offset_khz = (int)current_rf - (int)c->frequency / 1000; + + if (c->isdbt_sb_mode) { + state->subchannel = c->isdbt_sb_subchannel; + + i = dib8000_read_word(state, 26) & 1; /* P_dds_invspec */ + dib8000_write_word(state, 26, c->inversion ^ i); + + if (state->cfg.pll->ifreq == 0) { /* low if tuner */ + if ((c->inversion ^ i) == 0) + dib8000_write_word(state, 26, dib8000_read_word(state, 26) | 1); + } else { + if ((c->inversion ^ i) == 0) + total_dds_offset_khz *= -1; + } + } + + dprintk("%dkhz tuner offset (frequency = %dHz & current_rf = %dHz) total_dds_offset_hz = %d\n", c->frequency - current_rf, c->frequency, current_rf, total_dds_offset_khz); + + /* apply dds offset now */ + dib8000_set_dds(state, total_dds_offset_khz); +} + +static u16 LUT_isdbt_symbol_duration[4] = { 26, 101, 63 }; + +static u32 dib8000_get_symbol_duration(struct dib8000_state *state) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + u16 i; + + switch (c->transmission_mode) { + case TRANSMISSION_MODE_2K: + i = 0; + break; + case TRANSMISSION_MODE_4K: + i = 2; + break; + default: + case TRANSMISSION_MODE_AUTO: + case TRANSMISSION_MODE_8K: + i = 1; + break; + } + + return (LUT_isdbt_symbol_duration[i] / (c->bandwidth_hz / 1000)) + 1; +} + +static void dib8000_set_isdbt_loop_params(struct dib8000_state *state, enum param_loop_step loop_step) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + u16 reg_32 = 0, reg_37 = 0; + + switch (loop_step) { + case LOOP_TUNE_1: + if (c->isdbt_sb_mode) { + if (c->isdbt_partial_reception == 0) { + reg_32 = ((11 - state->mode) << 12) | (6 << 8) | 0x40; /* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x40 */ + reg_37 = (3 << 5) | (0 << 4) | (10 - state->mode); /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (10-P_mode) */ + } else { /* Sound Broadcasting mode 3 seg */ + reg_32 = ((10 - state->mode) << 12) | (6 << 8) | 0x60; /* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x60 */ + reg_37 = (3 << 5) | (0 << 4) | (9 - state->mode); /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (9-P_mode) */ + } + } else { /* 13-seg start conf offset loop parameters */ + reg_32 = ((9 - state->mode) << 12) | (6 << 8) | 0x80; /* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */ + reg_37 = (3 << 5) | (0 << 4) | (8 - state->mode); /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = 9 */ + } + break; + case LOOP_TUNE_2: + if (c->isdbt_sb_mode) { + if (c->isdbt_partial_reception == 0) { /* Sound Broadcasting mode 1 seg */ + reg_32 = ((13-state->mode) << 12) | (6 << 8) | 0x40; /* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40*/ + reg_37 = (12-state->mode) | ((5 + state->mode) << 5); + } else { /* Sound Broadcasting mode 3 seg */ + reg_32 = ((12-state->mode) << 12) | (6 << 8) | 0x60; /* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60 */ + reg_37 = (11-state->mode) | ((5 + state->mode) << 5); + } + } else { /* 13 seg */ + reg_32 = ((11-state->mode) << 12) | (6 << 8) | 0x80; /* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80 */ + reg_37 = ((5+state->mode) << 5) | (10 - state->mode); + } + break; + } + dib8000_write_word(state, 32, reg_32); + dib8000_write_word(state, 37, reg_37); +} + +static void dib8000_demod_restart(struct dib8000_state *state) +{ + dib8000_write_word(state, 770, 0x4000); + dib8000_write_word(state, 770, 0x0000); + return; +} + +static void dib8000_set_sync_wait(struct dib8000_state *state) +{ + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + u16 sync_wait = 64; + + /* P_dvsy_sync_wait - reuse mode */ + switch (c->transmission_mode) { + case TRANSMISSION_MODE_8K: + sync_wait = 256; + break; + case TRANSMISSION_MODE_4K: + sync_wait = 128; + break; + default: + case TRANSMISSION_MODE_2K: + sync_wait = 64; + break; + } + + if (state->cfg.diversity_delay == 0) + sync_wait = (sync_wait * (1 << (c->guard_interval)) * 3) / 2 + 48; /* add 50% SFN margin + compensate for one DVSY-fifo */ + else + sync_wait = (sync_wait * (1 << (c->guard_interval)) * 3) / 2 + state->cfg.diversity_delay; /* add 50% SFN margin + compensate for DVSY-fifo */ + + dib8000_write_word(state, 273, (dib8000_read_word(state, 273) & 0x000f) | (sync_wait << 4)); +} + +static unsigned long dib8000_get_timeout(struct dib8000_state *state, u32 delay, enum timeout_mode mode) +{ + if (mode == SYMBOL_DEPENDENT_ON) + delay *= state->symbol_duration; + + return jiffies + usecs_to_jiffies(delay * 100); +} + +static s32 dib8000_get_status(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + return state->status; +} + +static enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + return state->tune_state; +} + +static int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state) +{ + struct dib8000_state *state = fe->demodulator_priv; + + state->tune_state = tune_state; + return 0; +} + +static int dib8000_tune_restart_from_demod(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + + state->status = FE_STATUS_TUNE_PENDING; + state->tune_state = CT_DEMOD_START; + return 0; +} + +static u16 dib8000_read_lock(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + + if (state->revision == 0x8090) + return dib8000_read_word(state, 570); + return dib8000_read_word(state, 568); +} + +static int dib8090p_init_sdram(struct dib8000_state *state) +{ + u16 reg = 0; + dprintk("init sdram\n"); + + reg = dib8000_read_word(state, 274) & 0xfff0; + dib8000_write_word(state, 274, reg | 0x7); /* P_dintlv_delay_ram = 7 because of MobileSdram */ + + dib8000_write_word(state, 1803, (7 << 2)); + + reg = dib8000_read_word(state, 1280); + dib8000_write_word(state, 1280, reg | (1 << 2)); /* force restart P_restart_sdram */ + dib8000_write_word(state, 1280, reg); /* release restart P_restart_sdram */ + + return 0; +} + +/** + * is_manual_mode - Check if TMCC should be used for parameters settings + * @c: struct dvb_frontend_properties + * + * By default, TMCC table should be used for parameter settings on most + * usercases. However, sometimes it is desirable to lock the demod to + * use the manual parameters. + * + * On manual mode, the current dib8000_tune state machine is very restrict: + * It requires that both per-layer and per-transponder parameters to be + * properly specified, otherwise the device won't lock. + * + * Check if all those conditions are properly satisfied before allowing + * the device to use the manual frequency lock mode. + */ +static int is_manual_mode(struct dtv_frontend_properties *c) +{ + int i, n_segs = 0; + + /* Use auto mode on DVB-T compat mode */ + if (c->delivery_system != SYS_ISDBT) + return 0; + + /* + * Transmission mode is only detected on auto mode, currently + */ + if (c->transmission_mode == TRANSMISSION_MODE_AUTO) { + dprintk("transmission mode auto\n"); + return 0; + } + + /* + * Guard interval is only detected on auto mode, currently + */ + if (c->guard_interval == GUARD_INTERVAL_AUTO) { + dprintk("guard interval auto\n"); + return 0; + } + + /* + * If no layer is enabled, assume auto mode, as at least one + * layer should be enabled + */ + if (!c->isdbt_layer_enabled) { + dprintk("no layer modulation specified\n"); + return 0; + } + + /* + * Check if the per-layer parameters aren't auto and + * disable a layer if segment count is 0 or invalid. + */ + for (i = 0; i < 3; i++) { + if (!(c->isdbt_layer_enabled & 1 << i)) + continue; + + if ((c->layer[i].segment_count > 13) || + (c->layer[i].segment_count == 0)) { + c->isdbt_layer_enabled &= ~(1 << i); + continue; + } + + n_segs += c->layer[i].segment_count; + + if ((c->layer[i].modulation == QAM_AUTO) || + (c->layer[i].fec == FEC_AUTO)) { + dprintk("layer %c has either modulation or FEC auto\n", + 'A' + i); + return 0; + } + } + + /* + * Userspace specified a wrong number of segments. + * fallback to auto mode. + */ + if (n_segs == 0 || n_segs > 13) { + dprintk("number of segments is invalid\n"); + return 0; + } + + /* Everything looks ok for manual mode */ + return 1; +} + +static int dib8000_tune(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + enum frontend_tune_state *tune_state = &state->tune_state; + + u16 locks, deeper_interleaver = 0, i; + int ret = 1; /* 1 symbol duration (in 100us unit) delay most of the time */ + + unsigned long *timeout = &state->timeout; + unsigned long now = jiffies; + u16 init_prbs; +#ifdef DIB8000_AGC_FREEZE + u16 agc1, agc2; +#endif + + u32 corm[4] = {0, 0, 0, 0}; + u8 find_index, max_value; + +#if 0 + if (*tune_state < CT_DEMOD_STOP) + dprintk("IN: context status = %d, TUNE_STATE %d autosearch step = %u jiffies = %lu\n", + state->channel_parameters_set, *tune_state, state->autosearch_state, now); +#endif + + switch (*tune_state) { + case CT_DEMOD_START: /* 30 */ + dib8000_reset_stats(fe); + + if (state->revision == 0x8090) + dib8090p_init_sdram(state); + state->status = FE_STATUS_TUNE_PENDING; + state->channel_parameters_set = is_manual_mode(c); + + dprintk("Tuning channel on %s search mode\n", + state->channel_parameters_set ? "manual" : "auto"); + + dib8000_viterbi_state(state, 0); /* force chan dec in restart */ + + /* Layer monitor */ + dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60); + + dib8000_set_frequency_offset(state); + dib8000_set_bandwidth(fe, c->bandwidth_hz / 1000); + + if (state->channel_parameters_set == 0) { /* The channel struct is unknown, search it ! */ +#ifdef DIB8000_AGC_FREEZE + if (state->revision != 0x8090) { + state->agc1_max = dib8000_read_word(state, 108); + state->agc1_min = dib8000_read_word(state, 109); + state->agc2_max = dib8000_read_word(state, 110); + state->agc2_min = dib8000_read_word(state, 111); + agc1 = dib8000_read_word(state, 388); + agc2 = dib8000_read_word(state, 389); + dib8000_write_word(state, 108, agc1); + dib8000_write_word(state, 109, agc1); + dib8000_write_word(state, 110, agc2); + dib8000_write_word(state, 111, agc2); + } +#endif + state->autosearch_state = AS_SEARCHING_FFT; + state->found_nfft = TRANSMISSION_MODE_AUTO; + state->found_guard = GUARD_INTERVAL_AUTO; + *tune_state = CT_DEMOD_SEARCH_NEXT; + } else { /* we already know the channel struct so TUNE only ! */ + state->autosearch_state = AS_DONE; + *tune_state = CT_DEMOD_STEP_3; + } + state->symbol_duration = dib8000_get_symbol_duration(state); + break; + + case CT_DEMOD_SEARCH_NEXT: /* 51 */ + dib8000_autosearch_start(fe); + if (state->revision == 0x8090) + ret = 50; + else + ret = 15; + *tune_state = CT_DEMOD_STEP_1; + break; + + case CT_DEMOD_STEP_1: /* 31 */ + switch (dib8000_autosearch_irq(fe)) { + case 1: /* fail */ + state->status = FE_STATUS_TUNE_FAILED; + state->autosearch_state = AS_DONE; + *tune_state = CT_DEMOD_STOP; /* else we are done here */ + break; + case 2: /* Success */ + state->status = FE_STATUS_FFT_SUCCESS; /* signal to the upper layer, that there was a channel found and the parameters can be read */ + *tune_state = CT_DEMOD_STEP_3; + if (state->autosearch_state == AS_SEARCHING_GUARD) + *tune_state = CT_DEMOD_STEP_2; + else + state->autosearch_state = AS_DONE; + break; + case 3: /* Autosearch FFT max correlation endded */ + *tune_state = CT_DEMOD_STEP_2; + break; + } + break; + + case CT_DEMOD_STEP_2: + switch (state->autosearch_state) { + case AS_SEARCHING_FFT: + /* searching for the correct FFT */ + if (state->revision == 0x8090) { + corm[2] = (dib8000_read_word(state, 596) << 16) | (dib8000_read_word(state, 597)); + corm[1] = (dib8000_read_word(state, 598) << 16) | (dib8000_read_word(state, 599)); + corm[0] = (dib8000_read_word(state, 600) << 16) | (dib8000_read_word(state, 601)); + } else { + corm[2] = (dib8000_read_word(state, 594) << 16) | (dib8000_read_word(state, 595)); + corm[1] = (dib8000_read_word(state, 596) << 16) | (dib8000_read_word(state, 597)); + corm[0] = (dib8000_read_word(state, 598) << 16) | (dib8000_read_word(state, 599)); + } + /* dprintk("corm fft: %u %u %u\n", corm[0], corm[1], corm[2]); */ + + max_value = 0; + for (find_index = 1 ; find_index < 3 ; find_index++) { + if (corm[max_value] < corm[find_index]) + max_value = find_index ; + } + + switch (max_value) { + case 0: + state->found_nfft = TRANSMISSION_MODE_2K; + break; + case 1: + state->found_nfft = TRANSMISSION_MODE_4K; + break; + case 2: + default: + state->found_nfft = TRANSMISSION_MODE_8K; + break; + } + /* dprintk("Autosearch FFT has found Mode %d\n", max_value + 1); */ + + *tune_state = CT_DEMOD_SEARCH_NEXT; + state->autosearch_state = AS_SEARCHING_GUARD; + if (state->revision == 0x8090) + ret = 50; + else + ret = 10; + break; + case AS_SEARCHING_GUARD: + /* searching for the correct guard interval */ + if (state->revision == 0x8090) + state->found_guard = dib8000_read_word(state, 572) & 0x3; + else + state->found_guard = dib8000_read_word(state, 570) & 0x3; + /* dprintk("guard interval found=%i\n", state->found_guard); */ + + *tune_state = CT_DEMOD_STEP_3; + break; + default: + /* the demod should never be in this state */ + state->status = FE_STATUS_TUNE_FAILED; + state->autosearch_state = AS_DONE; + *tune_state = CT_DEMOD_STOP; /* else we are done here */ + break; + } + break; + + case CT_DEMOD_STEP_3: /* 33 */ + dib8000_set_isdbt_loop_params(state, LOOP_TUNE_1); + dib8000_set_isdbt_common_channel(state, 0, 0);/* setting the known channel parameters here */ + *tune_state = CT_DEMOD_STEP_4; + break; + + case CT_DEMOD_STEP_4: /* (34) */ + dib8000_demod_restart(state); + + dib8000_set_sync_wait(state); + dib8000_set_diversity_in(state->fe[0], state->diversity_onoff); + + locks = (dib8000_read_word(state, 180) >> 6) & 0x3f; /* P_coff_winlen ? */ + /* coff should lock over P_coff_winlen ofdm symbols : give 3 times this length to lock */ + *timeout = dib8000_get_timeout(state, 2 * locks, SYMBOL_DEPENDENT_ON); + *tune_state = CT_DEMOD_STEP_5; + break; + + case CT_DEMOD_STEP_5: /* (35) */ + locks = dib8000_read_lock(fe); + if (locks & (0x3 << 11)) { /* coff-lock and off_cpil_lock achieved */ + dib8000_update_timf(state); /* we achieved a coff_cpil_lock - it's time to update the timf */ + if (!state->differential_constellation) { + /* 2 times lmod4_win_len + 10 symbols (pipe delay after coff + nb to compute a 1st correlation) */ + *timeout = dib8000_get_timeout(state, (20 * ((dib8000_read_word(state, 188)>>5)&0x1f)), SYMBOL_DEPENDENT_ON); + *tune_state = CT_DEMOD_STEP_7; + } else { + *tune_state = CT_DEMOD_STEP_8; + } + } else if (time_after(now, *timeout)) { + *tune_state = CT_DEMOD_STEP_6; /* goto check for diversity input connection */ + } + break; + + case CT_DEMOD_STEP_6: /* (36) if there is an input (diversity) */ + if ((state->fe[1] != NULL) && (state->output_mode != OUTMODE_DIVERSITY)) { + /* if there is a diversity fe in input and this fe is has not already failed : wait here until this fe has succeeded or failed */ + if (dib8000_get_status(state->fe[1]) <= FE_STATUS_STD_SUCCESS) /* Something is locked on the input fe */ + *tune_state = CT_DEMOD_STEP_8; /* go for mpeg */ + else if (dib8000_get_status(state->fe[1]) >= FE_STATUS_TUNE_TIME_TOO_SHORT) { /* fe in input failed also, break the current one */ + *tune_state = CT_DEMOD_STOP; /* else we are done here ; step 8 will close the loops and exit */ + dib8000_viterbi_state(state, 1); /* start viterbi chandec */ + dib8000_set_isdbt_loop_params(state, LOOP_TUNE_2); + state->status = FE_STATUS_TUNE_FAILED; + } + } else { + dib8000_viterbi_state(state, 1); /* start viterbi chandec */ + dib8000_set_isdbt_loop_params(state, LOOP_TUNE_2); + *tune_state = CT_DEMOD_STOP; /* else we are done here ; step 8 will close the loops and exit */ + state->status = FE_STATUS_TUNE_FAILED; + } + break; + + case CT_DEMOD_STEP_7: /* 37 */ + locks = dib8000_read_lock(fe); + if (locks & (1<<10)) { /* lmod4_lock */ + ret = 14; /* wait for 14 symbols */ + *tune_state = CT_DEMOD_STEP_8; + } else if (time_after(now, *timeout)) + *tune_state = CT_DEMOD_STEP_6; /* goto check for diversity input connection */ + break; + + case CT_DEMOD_STEP_8: /* 38 */ + dib8000_viterbi_state(state, 1); /* start viterbi chandec */ + dib8000_set_isdbt_loop_params(state, LOOP_TUNE_2); + + /* mpeg will never lock on this condition because init_prbs is not set : search for it !*/ + if (c->isdbt_sb_mode + && c->isdbt_sb_subchannel < 14 + && !state->differential_constellation) { + state->subchannel = 0; + *tune_state = CT_DEMOD_STEP_11; + } else { + *tune_state = CT_DEMOD_STEP_9; + state->status = FE_STATUS_LOCKED; + } + break; + + case CT_DEMOD_STEP_9: /* 39 */ + if ((state->revision == 0x8090) || ((dib8000_read_word(state, 1291) >> 9) & 0x1)) { /* fe capable of deinterleaving : esram */ + /* defines timeout for mpeg lock depending on interleaver length of longest layer */ + for (i = 0; i < 3; i++) { + if (c->layer[i].interleaving >= deeper_interleaver) { + dprintk("layer%i: time interleaver = %d\n", i, c->layer[i].interleaving); + if (c->layer[i].segment_count > 0) { /* valid layer */ + deeper_interleaver = c->layer[0].interleaving; + state->longest_intlv_layer = i; + } + } + } + + if (deeper_interleaver == 0) + locks = 2; /* locks is the tmp local variable name */ + else if (deeper_interleaver == 3) + locks = 8; + else + locks = 2 * deeper_interleaver; + + if (state->diversity_onoff != 0) /* because of diversity sync */ + locks *= 2; + + *timeout = now + msecs_to_jiffies(200 * locks); /* give the mpeg lock 800ms if sram is present */ + dprintk("Deeper interleaver mode = %d on layer %d : timeout mult factor = %d => will use timeout = %ld\n", + deeper_interleaver, state->longest_intlv_layer, locks, *timeout); + + *tune_state = CT_DEMOD_STEP_10; + } else + *tune_state = CT_DEMOD_STOP; + break; + + case CT_DEMOD_STEP_10: /* 40 */ + locks = dib8000_read_lock(fe); + if (locks&(1<<(7-state->longest_intlv_layer))) { /* mpeg lock : check the longest one */ + dprintk("ISDB-T layer locks: Layer A %s, Layer B %s, Layer C %s\n", + c->layer[0].segment_count ? (locks >> 7) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled", + c->layer[1].segment_count ? (locks >> 6) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled", + c->layer[2].segment_count ? (locks >> 5) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled"); + if (c->isdbt_sb_mode + && c->isdbt_sb_subchannel < 14 + && !state->differential_constellation) + /* signal to the upper layer, that there was a channel found and the parameters can be read */ + state->status = FE_STATUS_DEMOD_SUCCESS; + else + state->status = FE_STATUS_DATA_LOCKED; + *tune_state = CT_DEMOD_STOP; + } else if (time_after(now, *timeout)) { + if (c->isdbt_sb_mode + && c->isdbt_sb_subchannel < 14 + && !state->differential_constellation) { /* continue to try init prbs autosearch */ + state->subchannel += 3; + *tune_state = CT_DEMOD_STEP_11; + } else { /* we are done mpeg of the longest interleaver xas not locking but let's try if an other layer has locked in the same time */ + if (locks & (0x7 << 5)) { + dprintk("Not all ISDB-T layers locked in %d ms: Layer A %s, Layer B %s, Layer C %s\n", + jiffies_to_msecs(now - *timeout), + c->layer[0].segment_count ? (locks >> 7) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled", + c->layer[1].segment_count ? (locks >> 6) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled", + c->layer[2].segment_count ? (locks >> 5) & 0x1 ? "locked" : "NOT LOCKED" : "not enabled"); + + state->status = FE_STATUS_DATA_LOCKED; + } else + state->status = FE_STATUS_TUNE_FAILED; + *tune_state = CT_DEMOD_STOP; + } + } + break; + + case CT_DEMOD_STEP_11: /* 41 : init prbs autosearch */ + init_prbs = dib8000_get_init_prbs(state, state->subchannel); + + if (init_prbs) { + dib8000_set_subchannel_prbs(state, init_prbs); + *tune_state = CT_DEMOD_STEP_9; + } else { + *tune_state = CT_DEMOD_STOP; + state->status = FE_STATUS_TUNE_FAILED; + } + break; + + default: + break; + } + + /* tuning is finished - cleanup the demod */ + switch (*tune_state) { + case CT_DEMOD_STOP: /* (42) */ +#ifdef DIB8000_AGC_FREEZE + if ((state->revision != 0x8090) && (state->agc1_max != 0)) { + dib8000_write_word(state, 108, state->agc1_max); + dib8000_write_word(state, 109, state->agc1_min); + dib8000_write_word(state, 110, state->agc2_max); + dib8000_write_word(state, 111, state->agc2_min); + state->agc1_max = 0; + state->agc1_min = 0; + state->agc2_max = 0; + state->agc2_min = 0; + } +#endif + ret = 0; + break; + default: + break; + } + + if ((ret > 0) && (*tune_state > CT_DEMOD_STEP_3)) + return ret * state->symbol_duration; + if ((ret > 0) && (ret < state->symbol_duration)) + return state->symbol_duration; /* at least one symbol */ + return ret; +} + +static int dib8000_wakeup(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend; + int ret; + + dib8000_set_power_mode(state, DIB8000_POWER_ALL); + dib8000_set_adc_state(state, DIBX000_ADC_ON); + if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0) + dprintk("could not start Slow ADC\n"); + + if (state->revision == 0x8090) + dib8000_sad_calib(state); + + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + ret = state->fe[index_frontend]->ops.init(state->fe[index_frontend]); + if (ret < 0) + return ret; + } + + return 0; +} + +static int dib8000_sleep(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend; + int ret; + + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + ret = state->fe[index_frontend]->ops.sleep(state->fe[index_frontend]); + if (ret < 0) + return ret; + } + + if (state->revision != 0x8090) + dib8000_set_output_mode(fe, OUTMODE_HIGH_Z); + dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY); + return dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(state, DIBX000_ADC_OFF); +} + +static int dib8000_read_status(struct dvb_frontend *fe, enum fe_status *stat); + +static int dib8000_get_frontend(struct dvb_frontend *fe, + struct dtv_frontend_properties *c) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 i, val = 0; + enum fe_status stat = 0; + u8 index_frontend, sub_index_frontend; + + c->bandwidth_hz = 6000000; + + /* + * If called to early, get_frontend makes dib8000_tune to either + * not lock or not sync. This causes dvbv5-scan/dvbv5-zap to fail. + * So, let's just return if frontend 0 has not locked. + */ + dib8000_read_status(fe, &stat); + if (!(stat & FE_HAS_SYNC)) + return 0; + + dprintk("dib8000_get_frontend: TMCC lock\n"); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat); + if (stat&FE_HAS_SYNC) { + dprintk("TMCC lock on the slave%i\n", index_frontend); + /* synchronize the cache with the other frontends */ + state->fe[index_frontend]->ops.get_frontend(state->fe[index_frontend], c); + for (sub_index_frontend = 0; (sub_index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[sub_index_frontend] != NULL); sub_index_frontend++) { + if (sub_index_frontend != index_frontend) { + state->fe[sub_index_frontend]->dtv_property_cache.isdbt_sb_mode = state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode; + state->fe[sub_index_frontend]->dtv_property_cache.inversion = state->fe[index_frontend]->dtv_property_cache.inversion; + state->fe[sub_index_frontend]->dtv_property_cache.transmission_mode = state->fe[index_frontend]->dtv_property_cache.transmission_mode; + state->fe[sub_index_frontend]->dtv_property_cache.guard_interval = state->fe[index_frontend]->dtv_property_cache.guard_interval; + state->fe[sub_index_frontend]->dtv_property_cache.isdbt_partial_reception = state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception; + for (i = 0; i < 3; i++) { + state->fe[sub_index_frontend]->dtv_property_cache.layer[i].segment_count = state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count; + state->fe[sub_index_frontend]->dtv_property_cache.layer[i].interleaving = state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving; + state->fe[sub_index_frontend]->dtv_property_cache.layer[i].fec = state->fe[index_frontend]->dtv_property_cache.layer[i].fec; + state->fe[sub_index_frontend]->dtv_property_cache.layer[i].modulation = state->fe[index_frontend]->dtv_property_cache.layer[i].modulation; + } + } + } + return 0; + } + } + + c->isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1; + + if (state->revision == 0x8090) + val = dib8000_read_word(state, 572); + else + val = dib8000_read_word(state, 570); + c->inversion = (val & 0x40) >> 6; + switch ((val & 0x30) >> 4) { + case 1: + c->transmission_mode = TRANSMISSION_MODE_2K; + dprintk("dib8000_get_frontend: transmission mode 2K\n"); + break; + case 2: + c->transmission_mode = TRANSMISSION_MODE_4K; + dprintk("dib8000_get_frontend: transmission mode 4K\n"); + break; + case 3: + default: + c->transmission_mode = TRANSMISSION_MODE_8K; + dprintk("dib8000_get_frontend: transmission mode 8K\n"); + break; + } + + switch (val & 0x3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + dprintk("dib8000_get_frontend: Guard Interval = 1/32\n"); + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + dprintk("dib8000_get_frontend: Guard Interval = 1/16\n"); + break; + case 2: + dprintk("dib8000_get_frontend: Guard Interval = 1/8\n"); + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + dprintk("dib8000_get_frontend: Guard Interval = 1/4\n"); + c->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + val = dib8000_read_word(state, 505); + c->isdbt_partial_reception = val & 1; + dprintk("dib8000_get_frontend: partial_reception = %d\n", c->isdbt_partial_reception); + + for (i = 0; i < 3; i++) { + int show; + + val = dib8000_read_word(state, 493 + i) & 0x0f; + c->layer[i].segment_count = val; + + if (val == 0 || val > 13) + show = 0; + else + show = 1; + + if (show) + dprintk("dib8000_get_frontend: Layer %d segments = %d\n", + i, c->layer[i].segment_count); + + val = dib8000_read_word(state, 499 + i) & 0x3; + /* Interleaving can be 0, 1, 2 or 4 */ + if (val == 3) + val = 4; + c->layer[i].interleaving = val; + if (show) + dprintk("dib8000_get_frontend: Layer %d time_intlv = %d\n", + i, c->layer[i].interleaving); + + val = dib8000_read_word(state, 481 + i); + switch (val & 0x7) { + case 1: + c->layer[i].fec = FEC_1_2; + if (show) + dprintk("dib8000_get_frontend: Layer %d Code Rate = 1/2\n", i); + break; + case 2: + c->layer[i].fec = FEC_2_3; + if (show) + dprintk("dib8000_get_frontend: Layer %d Code Rate = 2/3\n", i); + break; + case 3: + c->layer[i].fec = FEC_3_4; + if (show) + dprintk("dib8000_get_frontend: Layer %d Code Rate = 3/4\n", i); + break; + case 5: + c->layer[i].fec = FEC_5_6; + if (show) + dprintk("dib8000_get_frontend: Layer %d Code Rate = 5/6\n", i); + break; + default: + c->layer[i].fec = FEC_7_8; + if (show) + dprintk("dib8000_get_frontend: Layer %d Code Rate = 7/8\n", i); + break; + } + + val = dib8000_read_word(state, 487 + i); + switch (val & 0x3) { + case 0: + c->layer[i].modulation = DQPSK; + if (show) + dprintk("dib8000_get_frontend: Layer %d DQPSK\n", i); + break; + case 1: + c->layer[i].modulation = QPSK; + if (show) + dprintk("dib8000_get_frontend: Layer %d QPSK\n", i); + break; + case 2: + c->layer[i].modulation = QAM_16; + if (show) + dprintk("dib8000_get_frontend: Layer %d QAM16\n", i); + break; + case 3: + default: + c->layer[i].modulation = QAM_64; + if (show) + dprintk("dib8000_get_frontend: Layer %d QAM64\n", i); + break; + } + } + + /* synchronize the cache with the other frontends */ + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode = c->isdbt_sb_mode; + state->fe[index_frontend]->dtv_property_cache.inversion = c->inversion; + state->fe[index_frontend]->dtv_property_cache.transmission_mode = c->transmission_mode; + state->fe[index_frontend]->dtv_property_cache.guard_interval = c->guard_interval; + state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception = c->isdbt_partial_reception; + for (i = 0; i < 3; i++) { + state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count = c->layer[i].segment_count; + state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving = c->layer[i].interleaving; + state->fe[index_frontend]->dtv_property_cache.layer[i].fec = c->layer[i].fec; + state->fe[index_frontend]->dtv_property_cache.layer[i].modulation = c->layer[i].modulation; + } + } + return 0; +} + +static int dib8000_set_frontend(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + int l, i, active, time, time_slave = 0; + u8 exit_condition, index_frontend; + unsigned long delay, callback_time; + + if (c->frequency == 0) { + dprintk("dib8000: must at least specify frequency\n"); + return 0; + } + + if (c->bandwidth_hz == 0) { + dprintk("dib8000: no bandwidth specified, set to default\n"); + c->bandwidth_hz = 6000000; + } + + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + /* synchronization of the cache */ + state->fe[index_frontend]->dtv_property_cache.delivery_system = SYS_ISDBT; + memcpy(&state->fe[index_frontend]->dtv_property_cache, &fe->dtv_property_cache, sizeof(struct dtv_frontend_properties)); + + /* set output mode and diversity input */ + if (state->revision != 0x8090) { + dib8000_set_diversity_in(state->fe[index_frontend], 1); + if (index_frontend != 0) + dib8000_set_output_mode(state->fe[index_frontend], + OUTMODE_DIVERSITY); + else + dib8000_set_output_mode(state->fe[0], OUTMODE_HIGH_Z); + } else { + dib8096p_set_diversity_in(state->fe[index_frontend], 1); + if (index_frontend != 0) + dib8096p_set_output_mode(state->fe[index_frontend], + OUTMODE_DIVERSITY); + else + dib8096p_set_output_mode(state->fe[0], OUTMODE_HIGH_Z); + } + + /* tune the tuner */ + if (state->fe[index_frontend]->ops.tuner_ops.set_params) + state->fe[index_frontend]->ops.tuner_ops.set_params(state->fe[index_frontend]); + + dib8000_set_tune_state(state->fe[index_frontend], CT_AGC_START); + } + + /* turn off the diversity of the last chip */ + if (state->revision != 0x8090) + dib8000_set_diversity_in(state->fe[index_frontend - 1], 0); + else + dib8096p_set_diversity_in(state->fe[index_frontend - 1], 0); + + /* start up the AGC */ + do { + time = dib8000_agc_startup(state->fe[0]); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + time_slave = dib8000_agc_startup(state->fe[index_frontend]); + if (time == 0) + time = time_slave; + else if ((time_slave != 0) && (time_slave > time)) + time = time_slave; + } + if (time == 0) + break; + + /* + * Despite dib8000_agc_startup returns time at a 0.1 ms range, + * the actual sleep time depends on CONFIG_HZ. The worse case + * is when CONFIG_HZ=100. In such case, the minimum granularity + * is 10ms. On some real field tests, the tuner sometimes don't + * lock when this timer is lower than 10ms. So, enforce a 10ms + * granularity. + */ + time = 10 * (time + 99)/100; + usleep_range(time * 1000, (time + 1) * 1000); + exit_condition = 1; + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + if (dib8000_get_tune_state(state->fe[index_frontend]) != CT_AGC_STOP) { + exit_condition = 0; + break; + } + } + } while (exit_condition == 0); + + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) + dib8000_set_tune_state(state->fe[index_frontend], CT_DEMOD_START); + + active = 1; + do { + callback_time = 0; + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + delay = dib8000_tune(state->fe[index_frontend]); + if (delay != 0) { + delay = jiffies + usecs_to_jiffies(100 * delay); + if (!callback_time || delay < callback_time) + callback_time = delay; + } + + /* we are in autosearch */ + if (state->channel_parameters_set == 0) { /* searching */ + if ((dib8000_get_status(state->fe[index_frontend]) == FE_STATUS_DEMOD_SUCCESS) || (dib8000_get_status(state->fe[index_frontend]) == FE_STATUS_FFT_SUCCESS)) { + dprintk("autosearch succeeded on fe%i\n", index_frontend); + dib8000_get_frontend(state->fe[index_frontend], c); /* we read the channel parameters from the frontend which was successful */ + state->channel_parameters_set = 1; + + for (l = 0; (l < MAX_NUMBER_OF_FRONTENDS) && (state->fe[l] != NULL); l++) { + if (l != index_frontend) { /* and for all frontend except the successful one */ + dprintk("Restarting frontend %d\n", l); + dib8000_tune_restart_from_demod(state->fe[l]); + + state->fe[l]->dtv_property_cache.isdbt_sb_mode = state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode; + state->fe[l]->dtv_property_cache.inversion = state->fe[index_frontend]->dtv_property_cache.inversion; + state->fe[l]->dtv_property_cache.transmission_mode = state->fe[index_frontend]->dtv_property_cache.transmission_mode; + state->fe[l]->dtv_property_cache.guard_interval = state->fe[index_frontend]->dtv_property_cache.guard_interval; + state->fe[l]->dtv_property_cache.isdbt_partial_reception = state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception; + for (i = 0; i < 3; i++) { + state->fe[l]->dtv_property_cache.layer[i].segment_count = state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count; + state->fe[l]->dtv_property_cache.layer[i].interleaving = state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving; + state->fe[l]->dtv_property_cache.layer[i].fec = state->fe[index_frontend]->dtv_property_cache.layer[i].fec; + state->fe[l]->dtv_property_cache.layer[i].modulation = state->fe[index_frontend]->dtv_property_cache.layer[i].modulation; + } + + } + } + } + } + } + /* tuning is done when the master frontend is done (failed or success) */ + if (dib8000_get_status(state->fe[0]) == FE_STATUS_TUNE_FAILED || + dib8000_get_status(state->fe[0]) == FE_STATUS_LOCKED || + dib8000_get_status(state->fe[0]) == FE_STATUS_DATA_LOCKED) { + active = 0; + /* we need to wait for all frontends to be finished */ + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + if (dib8000_get_tune_state(state->fe[index_frontend]) != CT_DEMOD_STOP) + active = 1; + } + if (active == 0) + dprintk("tuning done with status %d\n", dib8000_get_status(state->fe[0])); + } + + if ((active == 1) && (callback_time == 0)) { + dprintk("strange callback time something went wrong\n"); + active = 0; + } + + while ((active == 1) && (time_before(jiffies, callback_time))) + msleep(100); + } while (active); + + /* set output mode */ + if (state->revision != 0x8090) + dib8000_set_output_mode(state->fe[0], state->cfg.output_mode); + else { + dib8096p_set_output_mode(state->fe[0], state->cfg.output_mode); + if (state->cfg.enMpegOutput == 0) { + dib8096p_setDibTxMux(state, MPEG_ON_DIBTX); + dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); + } + } + + return 0; +} + +static int dib8000_get_stats(struct dvb_frontend *fe, enum fe_status stat); + +static int dib8000_read_status(struct dvb_frontend *fe, enum fe_status *stat) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 lock_slave = 0, lock; + u8 index_frontend; + + lock = dib8000_read_lock(fe); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) + lock_slave |= dib8000_read_lock(state->fe[index_frontend]); + + *stat = 0; + + if (((lock >> 13) & 1) || ((lock_slave >> 13) & 1)) + *stat |= FE_HAS_SIGNAL; + + if (((lock >> 8) & 1) || ((lock_slave >> 8) & 1)) /* Equal */ + *stat |= FE_HAS_CARRIER; + + if ((((lock >> 1) & 0xf) == 0xf) || (((lock_slave >> 1) & 0xf) == 0xf)) /* TMCC_SYNC */ + *stat |= FE_HAS_SYNC; + + if ((((lock >> 12) & 1) || ((lock_slave >> 12) & 1)) && ((lock >> 5) & 7)) /* FEC MPEG */ + *stat |= FE_HAS_LOCK; + + if (((lock >> 12) & 1) || ((lock_slave >> 12) & 1)) { + lock = dib8000_read_word(state, 554); /* Viterbi Layer A */ + if (lock & 0x01) + *stat |= FE_HAS_VITERBI; + + lock = dib8000_read_word(state, 555); /* Viterbi Layer B */ + if (lock & 0x01) + *stat |= FE_HAS_VITERBI; + + lock = dib8000_read_word(state, 556); /* Viterbi Layer C */ + if (lock & 0x01) + *stat |= FE_HAS_VITERBI; + } + dib8000_get_stats(fe, *stat); + + return 0; +} + +static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber) +{ + struct dib8000_state *state = fe->demodulator_priv; + + /* 13 segments */ + if (state->revision == 0x8090) + *ber = (dib8000_read_word(state, 562) << 16) | + dib8000_read_word(state, 563); + else + *ber = (dib8000_read_word(state, 560) << 16) | + dib8000_read_word(state, 561); + return 0; +} + +static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) +{ + struct dib8000_state *state = fe->demodulator_priv; + + /* packet error on 13 seg */ + if (state->revision == 0x8090) + *unc = dib8000_read_word(state, 567); + else + *unc = dib8000_read_word(state, 565); + return 0; +} + +static int dib8000_read_signal_strength(struct dvb_frontend *fe, u16 * strength) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend; + u16 val; + + *strength = 0; + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + state->fe[index_frontend]->ops.read_signal_strength(state->fe[index_frontend], &val); + if (val > 65535 - *strength) + *strength = 65535; + else + *strength += val; + } + + val = 65535 - dib8000_read_word(state, 390); + if (val > 65535 - *strength) + *strength = 65535; + else + *strength += val; + return 0; +} + +static u32 dib8000_get_snr(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u32 n, s, exp; + u16 val; + + if (state->revision != 0x8090) + val = dib8000_read_word(state, 542); + else + val = dib8000_read_word(state, 544); + n = (val >> 6) & 0xff; + exp = (val & 0x3f); + if ((exp & 0x20) != 0) + exp -= 0x40; + n <<= exp+16; + + if (state->revision != 0x8090) + val = dib8000_read_word(state, 543); + else + val = dib8000_read_word(state, 545); + s = (val >> 6) & 0xff; + exp = (val & 0x3f); + if ((exp & 0x20) != 0) + exp -= 0x40; + s <<= exp+16; + + if (n > 0) { + u32 t = (s/n) << 16; + return t + ((s << 16) - n*t) / n; + } + return 0xffffffff; +} + +static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend; + u32 snr_master; + + snr_master = dib8000_get_snr(fe); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) + snr_master += dib8000_get_snr(state->fe[index_frontend]); + + if ((snr_master >> 16) != 0) { + snr_master = 10*intlog10(snr_master>>16); + *snr = snr_master / ((1 << 24) / 10); + } + else + *snr = 0; + + return 0; +} + +struct per_layer_regs { + u16 lock, ber, per; +}; + +static const struct per_layer_regs per_layer_regs[] = { + { 554, 560, 562 }, + { 555, 576, 578 }, + { 556, 581, 583 }, +}; + +struct linear_segments { + unsigned x; + signed y; +}; + +/* + * Table to estimate signal strength in dBm. + * This table was empirically determinated by measuring the signal + * strength generated by a DTA-2111 RF generator directly connected into + * a dib8076 device (a PixelView PV-D231U stick), using a good quality + * 3 meters RC6 cable and good RC6 connectors. + * The real value can actually be different on other devices, depending + * on several factors, like if LNA is enabled or not, if diversity is + * enabled, type of connectors, etc. + * Yet, it is better to use this measure in dB than a random non-linear + * percentage value, especially for antenna adjustments. + * On my tests, the precision of the measure using this table is about + * 0.5 dB, with sounds reasonable enough. + */ +static struct linear_segments strength_to_db_table[] = { + { 55953, 108500 }, /* -22.5 dBm */ + { 55394, 108000 }, + { 53834, 107000 }, + { 52863, 106000 }, + { 52239, 105000 }, + { 52012, 104000 }, + { 51803, 103000 }, + { 51566, 102000 }, + { 51356, 101000 }, + { 51112, 100000 }, + { 50869, 99000 }, + { 50600, 98000 }, + { 50363, 97000 }, + { 50117, 96000 }, /* -35 dBm */ + { 49889, 95000 }, + { 49680, 94000 }, + { 49493, 93000 }, + { 49302, 92000 }, + { 48929, 91000 }, + { 48416, 90000 }, + { 48035, 89000 }, + { 47593, 88000 }, + { 47282, 87000 }, + { 46953, 86000 }, + { 46698, 85000 }, + { 45617, 84000 }, + { 44773, 83000 }, + { 43845, 82000 }, + { 43020, 81000 }, + { 42010, 80000 }, /* -51 dBm */ + { 0, 0 }, +}; + +static u32 interpolate_value(u32 value, struct linear_segments *segments, + unsigned len) +{ + u64 tmp64; + u32 dx; + s32 dy; + int i, ret; + + if (value >= segments[0].x) + return segments[0].y; + if (value < segments[len-1].x) + return segments[len-1].y; + + for (i = 1; i < len - 1; i++) { + /* If value is identical, no need to interpolate */ + if (value == segments[i].x) + return segments[i].y; + if (value > segments[i].x) + break; + } + + /* Linear interpolation between the two (x,y) points */ + dy = segments[i - 1].y - segments[i].y; + dx = segments[i - 1].x - segments[i].x; + + tmp64 = value - segments[i].x; + tmp64 *= dy; + do_div(tmp64, dx); + ret = segments[i].y + tmp64; + + return ret; +} + +static u32 dib8000_get_time_us(struct dvb_frontend *fe, int layer) +{ + struct dib8000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + int ini_layer, end_layer, i; + u64 time_us, tmp64; + u32 tmp, denom; + int guard, rate_num, rate_denum = 1, bits_per_symbol, nsegs; + int interleaving = 0, fft_div; + + if (layer >= 0) { + ini_layer = layer; + end_layer = layer + 1; + } else { + ini_layer = 0; + end_layer = 3; + } + + switch (c->guard_interval) { + case GUARD_INTERVAL_1_4: + guard = 4; + break; + case GUARD_INTERVAL_1_8: + guard = 8; + break; + case GUARD_INTERVAL_1_16: + guard = 16; + break; + default: + case GUARD_INTERVAL_1_32: + guard = 32; + break; + } + + switch (c->transmission_mode) { + case TRANSMISSION_MODE_2K: + fft_div = 4; + break; + case TRANSMISSION_MODE_4K: + fft_div = 2; + break; + default: + case TRANSMISSION_MODE_8K: + fft_div = 1; + break; + } + + denom = 0; + for (i = ini_layer; i < end_layer; i++) { + nsegs = c->layer[i].segment_count; + if (nsegs == 0 || nsegs > 13) + continue; + + switch (c->layer[i].modulation) { + case DQPSK: + case QPSK: + bits_per_symbol = 2; + break; + case QAM_16: + bits_per_symbol = 4; + break; + default: + case QAM_64: + bits_per_symbol = 6; + break; + } + + switch (c->layer[i].fec) { + case FEC_1_2: + rate_num = 1; + rate_denum = 2; + break; + case FEC_2_3: + rate_num = 2; + rate_denum = 3; + break; + case FEC_3_4: + rate_num = 3; + rate_denum = 4; + break; + case FEC_5_6: + rate_num = 5; + rate_denum = 6; + break; + default: + case FEC_7_8: + rate_num = 7; + rate_denum = 8; + break; + } + + interleaving = c->layer[i].interleaving; + + denom += bits_per_symbol * rate_num * fft_div * nsegs * 384; + } + + /* If all goes wrong, wait for 1s for the next stats */ + if (!denom) + return 0; + + /* Estimate the period for the total bit rate */ + time_us = rate_denum * (1008 * 1562500L); + tmp64 = time_us; + do_div(tmp64, guard); + time_us = time_us + tmp64; + time_us += denom / 2; + do_div(time_us, denom); + + tmp = 1008 * 96 * interleaving; + time_us += tmp + tmp / guard; + + return time_us; +} + +static int dib8000_get_stats(struct dvb_frontend *fe, enum fe_status stat) +{ + struct dib8000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; + int i; + int show_per_stats = 0; + u32 time_us = 0, snr, val; + u64 blocks; + s32 db; + u16 strength; + + /* Get Signal strength */ + dib8000_read_signal_strength(fe, &strength); + val = strength; + db = interpolate_value(val, + strength_to_db_table, + ARRAY_SIZE(strength_to_db_table)) - 131000; + c->strength.stat[0].svalue = db; + + /* UCB/BER/CNR measures require lock */ + if (!(stat & FE_HAS_LOCK)) { + c->cnr.len = 1; + c->block_count.len = 1; + c->block_error.len = 1; + c->post_bit_error.len = 1; + c->post_bit_count.len = 1; + c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + return 0; + } + + /* Check if time for stats was elapsed */ + if (time_after(jiffies, state->per_jiffies_stats)) { + state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000); + + /* Get SNR */ + snr = dib8000_get_snr(fe); + for (i = 1; i < MAX_NUMBER_OF_FRONTENDS; i++) { + if (state->fe[i]) + snr += dib8000_get_snr(state->fe[i]); + } + snr = snr >> 16; + + if (snr) { + snr = 10 * intlog10(snr); + snr = (1000L * snr) >> 24; + } else { + snr = 0; + } + c->cnr.stat[0].svalue = snr; + c->cnr.stat[0].scale = FE_SCALE_DECIBEL; + + /* Get UCB measures */ + dib8000_read_unc_blocks(fe, &val); + if (val < state->init_ucb) + state->init_ucb += 0x100000000LL; + + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_error.stat[0].uvalue = val + state->init_ucb; + + /* Estimate the number of packets based on bitrate */ + if (!time_us) + time_us = dib8000_get_time_us(fe, -1); + + if (time_us) { + blocks = 1250000ULL * 1000000ULL; + do_div(blocks, time_us * 8 * 204); + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].uvalue += blocks; + } + + show_per_stats = 1; + } + + /* Get post-BER measures */ + if (time_after(jiffies, state->ber_jiffies_stats)) { + time_us = dib8000_get_time_us(fe, -1); + state->ber_jiffies_stats = jiffies + msecs_to_jiffies((time_us + 500) / 1000); + + dprintk("Next all layers stats available in %u us.\n", time_us); + + dib8000_read_ber(fe, &val); + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue += val; + + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].uvalue += 100000000; + } + + if (state->revision < 0x8002) + return 0; + + c->block_error.len = 4; + c->post_bit_error.len = 4; + c->post_bit_count.len = 4; + + for (i = 0; i < 3; i++) { + unsigned nsegs = c->layer[i].segment_count; + + if (nsegs == 0 || nsegs > 13) + continue; + + time_us = 0; + + if (time_after(jiffies, state->ber_jiffies_stats_layer[i])) { + time_us = dib8000_get_time_us(fe, i); + + state->ber_jiffies_stats_layer[i] = jiffies + msecs_to_jiffies((time_us + 500) / 1000); + dprintk("Next layer %c stats will be available in %u us\n", + 'A' + i, time_us); + + val = dib8000_read_word(state, per_layer_regs[i].ber); + c->post_bit_error.stat[1 + i].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[1 + i].uvalue += val; + + c->post_bit_count.stat[1 + i].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[1 + i].uvalue += 100000000; + } + + if (show_per_stats) { + val = dib8000_read_word(state, per_layer_regs[i].per); + + c->block_error.stat[1 + i].scale = FE_SCALE_COUNTER; + c->block_error.stat[1 + i].uvalue += val; + + if (!time_us) + time_us = dib8000_get_time_us(fe, i); + if (time_us) { + blocks = 1250000ULL * 1000000ULL; + do_div(blocks, time_us * 8 * 204); + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].uvalue += blocks; + } + } + } + return 0; +} + +static int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave) +{ + struct dib8000_state *state = fe->demodulator_priv; + u8 index_frontend = 1; + + while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL)) + index_frontend++; + if (index_frontend < MAX_NUMBER_OF_FRONTENDS) { + dprintk("set slave fe %p to index %i\n", fe_slave, index_frontend); + state->fe[index_frontend] = fe_slave; + return 0; + } + + dprintk("too many slave frontend\n"); + return -ENOMEM; +} + +static struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int slave_index) +{ + struct dib8000_state *state = fe->demodulator_priv; + + if (slave_index >= MAX_NUMBER_OF_FRONTENDS) + return NULL; + return state->fe[slave_index]; +} + +static int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, + u8 default_addr, u8 first_addr, u8 is_dib8096p) +{ + int k = 0, ret = 0; + u8 new_addr = 0; + struct i2c_device client = {.adap = host }; + + client.i2c_write_buffer = kzalloc(4, GFP_KERNEL); + if (!client.i2c_write_buffer) { + dprintk("%s: not enough memory\n", __func__); + return -ENOMEM; + } + client.i2c_read_buffer = kzalloc(4, GFP_KERNEL); + if (!client.i2c_read_buffer) { + dprintk("%s: not enough memory\n", __func__); + ret = -ENOMEM; + goto error_memory_read; + } + client.i2c_buffer_lock = kzalloc(sizeof(struct mutex), GFP_KERNEL); + if (!client.i2c_buffer_lock) { + dprintk("%s: not enough memory\n", __func__); + ret = -ENOMEM; + goto error_memory_lock; + } + mutex_init(client.i2c_buffer_lock); + + for (k = no_of_demods - 1; k >= 0; k--) { + /* designated i2c address */ + new_addr = first_addr + (k << 1); + + client.addr = new_addr; + if (!is_dib8096p) + dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */ + if (dib8000_identify(&client) == 0) { + /* sram lead in, rdy */ + if (!is_dib8096p) + dib8000_i2c_write16(&client, 1287, 0x0003); + client.addr = default_addr; + if (dib8000_identify(&client) == 0) { + dprintk("#%d: not identified\n", k); + ret = -EINVAL; + goto error; + } + } + + /* start diversity to pull_down div_str - just for i2c-enumeration */ + dib8000_i2c_write16(&client, 1286, (1 << 10) | (4 << 6)); + + /* set new i2c address and force divstart */ + dib8000_i2c_write16(&client, 1285, (new_addr << 2) | 0x2); + client.addr = new_addr; + dib8000_identify(&client); + + dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr); + } + + for (k = 0; k < no_of_demods; k++) { + new_addr = first_addr | (k << 1); + client.addr = new_addr; + + // unforce divstr + dib8000_i2c_write16(&client, 1285, new_addr << 2); + + /* deactivate div - it was just for i2c-enumeration */ + dib8000_i2c_write16(&client, 1286, 0); + } + +error: + kfree(client.i2c_buffer_lock); +error_memory_lock: + kfree(client.i2c_read_buffer); +error_memory_read: + kfree(client.i2c_write_buffer); + + return ret; +} + +static int dib8000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + tune->step_size = 0; + tune->max_drift = 0; + return 0; +} + +static void dib8000_release(struct dvb_frontend *fe) +{ + struct dib8000_state *st = fe->demodulator_priv; + u8 index_frontend; + + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (st->fe[index_frontend] != NULL); index_frontend++) + dvb_frontend_detach(st->fe[index_frontend]); + + dibx000_exit_i2c_master(&st->i2c_master); + i2c_del_adapter(&st->dib8096p_tuner_adap); + kfree(st->fe[0]); + kfree(st); +} + +static struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating) +{ + struct dib8000_state *st = fe->demodulator_priv; + return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); +} + +static int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) +{ + struct dib8000_state *st = fe->demodulator_priv; + u16 val = dib8000_read_word(st, 299) & 0xffef; + val |= (onoff & 0x1) << 4; + + dprintk("pid filter enabled %d\n", onoff); + return dib8000_write_word(st, 299, val); +} + +static int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) +{ + struct dib8000_state *st = fe->demodulator_priv; + dprintk("Index %x, PID %d, OnOff %d\n", id, pid, onoff); + return dib8000_write_word(st, 305 + id, onoff ? (1 << 13) | pid : 0); +} + +static const struct dvb_frontend_ops dib8000_ops = { + .delsys = { SYS_ISDBT }, + .info = { + .name = "DiBcom 8000 ISDB-T", + .frequency_min_hz = 44250 * kHz, + .frequency_max_hz = 867250 * kHz, + .frequency_stepsize_hz = 62500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO, + }, + + .release = dib8000_release, + + .init = dib8000_wakeup, + .sleep = dib8000_sleep, + + .set_frontend = dib8000_set_frontend, + .get_tune_settings = dib8000_fe_get_tune_settings, + .get_frontend = dib8000_get_frontend, + + .read_status = dib8000_read_status, + .read_ber = dib8000_read_ber, + .read_signal_strength = dib8000_read_signal_strength, + .read_snr = dib8000_read_snr, + .read_ucblocks = dib8000_read_unc_blocks, +}; + +static struct dvb_frontend *dib8000_init(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg) +{ + struct dvb_frontend *fe; + struct dib8000_state *state; + + dprintk("dib8000_init\n"); + + state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL); + if (state == NULL) + return NULL; + fe = kzalloc(sizeof(struct dvb_frontend), GFP_KERNEL); + if (fe == NULL) + goto error; + + memcpy(&state->cfg, cfg, sizeof(struct dib8000_config)); + state->i2c.adap = i2c_adap; + state->i2c.addr = i2c_addr; + state->i2c.i2c_write_buffer = state->i2c_write_buffer; + state->i2c.i2c_read_buffer = state->i2c_read_buffer; + mutex_init(&state->i2c_buffer_lock); + state->i2c.i2c_buffer_lock = &state->i2c_buffer_lock; + state->gpio_val = cfg->gpio_val; + state->gpio_dir = cfg->gpio_dir; + + /* Ensure the output mode remains at the previous default if it's + * not specifically set by the caller. + */ + if ((state->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (state->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK)) + state->cfg.output_mode = OUTMODE_MPEG2_FIFO; + + state->fe[0] = fe; + fe->demodulator_priv = state; + memcpy(&state->fe[0]->ops, &dib8000_ops, sizeof(struct dvb_frontend_ops)); + + state->timf_default = cfg->pll->timf; + + if (dib8000_identify(&state->i2c) == 0) { + kfree(fe); + goto error; + } + + dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr); + + /* init 8096p tuner adapter */ + strscpy(state->dib8096p_tuner_adap.name, "DiB8096P tuner interface", + sizeof(state->dib8096p_tuner_adap.name)); + state->dib8096p_tuner_adap.algo = &dib8096p_tuner_xfer_algo; + state->dib8096p_tuner_adap.algo_data = NULL; + state->dib8096p_tuner_adap.dev.parent = state->i2c.adap->dev.parent; + i2c_set_adapdata(&state->dib8096p_tuner_adap, state); + i2c_add_adapter(&state->dib8096p_tuner_adap); + + dib8000_reset(fe); + + dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); /* ber_rs_len = 3 */ + state->current_demod_bw = 6000; + + return fe; + +error: + kfree(state); + return NULL; +} + +void *dib8000_attach(struct dib8000_ops *ops) +{ + if (!ops) + return NULL; + + ops->pwm_agc_reset = dib8000_pwm_agc_reset; + ops->get_dc_power = dib8090p_get_dc_power; + ops->set_gpio = dib8000_set_gpio; + ops->get_slave_frontend = dib8000_get_slave_frontend; + ops->set_tune_state = dib8000_set_tune_state; + ops->pid_filter_ctrl = dib8000_pid_filter_ctrl; + ops->get_adc_power = dib8000_get_adc_power; + ops->update_pll = dib8000_update_pll; + ops->tuner_sleep = dib8096p_tuner_sleep; + ops->get_tune_state = dib8000_get_tune_state; + ops->get_i2c_tuner = dib8096p_get_i2c_tuner; + ops->set_slave_frontend = dib8000_set_slave_frontend; + ops->pid_filter = dib8000_pid_filter; + ops->ctrl_timf = dib8000_ctrl_timf; + ops->init = dib8000_init; + ops->get_i2c_master = dib8000_get_i2c_master; + ops->i2c_enumeration = dib8000_i2c_enumeration; + ops->set_wbd_ref = dib8000_set_wbd_ref; + + return ops; +} +EXPORT_SYMBOL_GPL(dib8000_attach); + +MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@parrot.com, Patrick Boettcher <patrick.boettcher@posteo.de>"); +MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator"); +MODULE_LICENSE("GPL"); |