summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/i2c/Kconfig')
-rw-r--r--drivers/media/i2c/Kconfig1493
1 files changed, 1493 insertions, 0 deletions
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
new file mode 100644
index 0000000000..53b443be5a
--- /dev/null
+++ b/drivers/media/i2c/Kconfig
@@ -0,0 +1,1493 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Multimedia Video device configuration
+#
+
+if VIDEO_DEV
+
+comment "IR I2C driver auto-selected by 'Autoselect ancillary drivers'"
+ depends on MEDIA_SUBDRV_AUTOSELECT && I2C && RC_CORE
+
+config VIDEO_IR_I2C
+ tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT || EXPERT
+ depends on I2C && RC_CORE
+ default y
+ help
+ Most boards have an IR chip directly connected via GPIO. However,
+ some video boards have the IR connected via I2C bus.
+
+ If your board doesn't have an I2C IR chip, you may disable this
+ option.
+
+ In doubt, say Y.
+
+#
+# V4L2 I2C drivers that are related with Camera support
+#
+
+menuconfig VIDEO_CAMERA_SENSOR
+ bool "Camera sensor devices"
+ depends on MEDIA_CAMERA_SUPPORT && I2C
+ select MEDIA_CONTROLLER
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ default y
+
+if VIDEO_CAMERA_SENSOR
+
+config VIDEO_APTINA_PLL
+ tristate
+
+config VIDEO_CCS_PLL
+ tristate
+
+config VIDEO_AR0521
+ tristate "ON Semiconductor AR0521 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the ON Semiconductor
+ AR0521 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ar0521.
+
+config VIDEO_HI556
+ tristate "Hynix Hi-556 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Hynix
+ Hi-556 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hi556.
+
+config VIDEO_HI846
+ tristate "Hynix Hi-846 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Hynix
+ Hi-846 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hi846.
+
+config VIDEO_HI847
+ tristate "Hynix Hi-847 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Hynix
+ Hi-847 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hi847.
+
+config VIDEO_IMX208
+ tristate "Sony IMX208 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX208 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx208.
+
+config VIDEO_IMX214
+ tristate "Sony IMX214 sensor support"
+ depends on GPIOLIB
+ select REGMAP_I2C
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX214 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx214.
+
+config VIDEO_IMX219
+ tristate "Sony IMX219 sensor support"
+ select V4L2_CCI_I2C
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX219 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx219.
+
+config VIDEO_IMX258
+ tristate "Sony IMX258 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX258 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx258.
+
+config VIDEO_IMX274
+ tristate "Sony IMX274 sensor support"
+ select REGMAP_I2C
+ help
+ This is a V4L2 sensor driver for the Sony IMX274
+ CMOS image sensor.
+
+config VIDEO_IMX290
+ tristate "Sony IMX290 sensor support"
+ select REGMAP_I2C
+ select V4L2_CCI_I2C
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX290 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx290.
+
+config VIDEO_IMX296
+ tristate "Sony IMX296 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX296 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx296.
+
+config VIDEO_IMX319
+ tristate "Sony IMX319 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX319 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx319.
+
+config VIDEO_IMX334
+ tristate "Sony IMX334 sensor support"
+ depends on OF_GPIO
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX334 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx334.
+
+config VIDEO_IMX335
+ tristate "Sony IMX335 sensor support"
+ depends on OF_GPIO
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX335 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx335.
+
+config VIDEO_IMX355
+ tristate "Sony IMX355 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX355 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx355.
+
+config VIDEO_IMX412
+ tristate "Sony IMX412 sensor support"
+ depends on OF_GPIO
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX412 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx412.
+
+config VIDEO_IMX415
+ tristate "Sony IMX415 sensor support"
+ depends on OF_GPIO
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX415 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx415.
+
+config VIDEO_MAX9271_LIB
+ tristate
+
+config VIDEO_MT9M001
+ tristate "mt9m001 support"
+ help
+ This driver supports MT9M001 cameras from Micron, monochrome
+ and colour models.
+
+config VIDEO_MT9M111
+ tristate "mt9m111, mt9m112 and mt9m131 support"
+ help
+ This driver supports MT9M111, MT9M112 and MT9M131 cameras from
+ Micron/Aptina
+
+config VIDEO_MT9P031
+ tristate "Aptina MT9P031 support"
+ select VIDEO_APTINA_PLL
+ help
+ This is a Video4Linux2 sensor driver for the Aptina
+ (Micron) mt9p031 5 Mpixel camera.
+
+config VIDEO_MT9T112
+ tristate "Aptina MT9T111/MT9T112 support"
+ help
+ This is a Video4Linux2 sensor driver for the Aptina
+ (Micron) MT9T111 and MT9T112 3 Mpixel camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mt9t112.
+
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
+config VIDEO_MT9V032
+ tristate "Micron MT9V032 sensor support"
+ select REGMAP_I2C
+ help
+ This is a Video4Linux2 sensor driver for the Micron
+ MT9V032 752x480 CMOS sensor.
+
+config VIDEO_MT9V111
+ tristate "Aptina MT9V111 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the Aptina/Micron
+ MT9V111 sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mt9v111.
+
+config VIDEO_OG01A1B
+ tristate "OmniVision OG01A1B sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OG01A1B camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called og01a1b.
+
+config VIDEO_OV01A10
+ tristate "OmniVision OV01A10 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV01A10 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov01a10.
+
+config VIDEO_OV02A10
+ tristate "OmniVision OV02A10 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV02A10 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov02a10.
+
+config VIDEO_OV08D10
+ tristate "OmniVision OV08D10 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV08D10 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov08d10.
+
+config VIDEO_OV08X40
+ tristate "OmniVision OV08X40 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV08X40 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov08x40.
+
+config VIDEO_OV13858
+ tristate "OmniVision OV13858 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV13858 camera.
+
+config VIDEO_OV13B10
+ tristate "OmniVision OV13B10 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV13B10 camera.
+
+config VIDEO_OV2640
+ tristate "OmniVision OV2640 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2640 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2640.
+
+config VIDEO_OV2659
+ tristate "OmniVision OV2659 sensor support"
+ depends on GPIOLIB
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2659 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2659.
+
+config VIDEO_OV2680
+ tristate "OmniVision OV2680 sensor support"
+ select V4L2_CCI_I2C
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2680 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2680.
+
+config VIDEO_OV2685
+ tristate "OmniVision OV2685 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2685 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2685.
+
+config VIDEO_OV2740
+ tristate "OmniVision OV2740 sensor support"
+ depends on ACPI || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2740 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2740.
+
+config VIDEO_OV4689
+ tristate "OmniVision OV4689 sensor support"
+ depends on GPIOLIB
+ help
+ This is a Video4Linux2 sensor-level driver for the OmniVision
+ OV4689 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov4689.
+
+config VIDEO_OV5640
+ tristate "OmniVision OV5640 sensor support"
+ depends on OF
+ depends on GPIOLIB
+ help
+ This is a Video4Linux2 sensor driver for the Omnivision
+ OV5640 camera sensor with a MIPI CSI-2 interface.
+
+config VIDEO_OV5645
+ tristate "OmniVision OV5645 sensor support"
+ depends on OF
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5645 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5645.
+
+config VIDEO_OV5647
+ tristate "OmniVision OV5647 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5647 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5647.
+
+config VIDEO_OV5648
+ tristate "OmniVision OV5648 sensor support"
+ depends on PM
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5648 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5648.
+
+config VIDEO_OV5670
+ tristate "OmniVision OV5670 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5670 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5670.
+
+config VIDEO_OV5675
+ tristate "OmniVision OV5675 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5675 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5675.
+
+config VIDEO_OV5693
+ tristate "OmniVision OV5693 sensor support"
+ select V4L2_CCI_I2C
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5693 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5693.
+
+config VIDEO_OV5695
+ tristate "OmniVision OV5695 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5695 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5695.
+
+config VIDEO_OV6650
+ tristate "OmniVision OV6650 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV6650 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov6650.
+
+config VIDEO_OV7251
+ tristate "OmniVision OV7251 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV7251 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov7251.
+
+config VIDEO_OV7640
+ tristate "OmniVision OV7640 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV7640 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov7640.
+
+config VIDEO_OV7670
+ tristate "OmniVision OV7670 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV7670 VGA camera. It currently only works with the M88ALP01
+ controller.
+
+config VIDEO_OV772X
+ tristate "OmniVision OV772x sensor support"
+ select REGMAP_SCCB
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV772x camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov772x.
+
+config VIDEO_OV7740
+ tristate "OmniVision OV7740 sensor support"
+ select REGMAP_SCCB
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV7740 VGA camera sensor.
+
+config VIDEO_OV8856
+ tristate "OmniVision OV8856 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV8856 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov8856.
+
+config VIDEO_OV8858
+ tristate "OmniVision OV8858 sensor support"
+ depends on PM
+ help
+ This is a Video4Linux2 sensor driver for OmniVision
+ OV8858 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov8858.
+
+config VIDEO_OV8865
+ tristate "OmniVision OV8865 sensor support"
+ depends on PM
+ help
+ This is a Video4Linux2 sensor driver for OmniVision
+ OV8865 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov8865.
+
+config VIDEO_OV9282
+ tristate "OmniVision OV9282 sensor support"
+ depends on OF_GPIO
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV9282 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov9282.
+
+config VIDEO_OV9640
+ tristate "OmniVision OV9640 sensor support"
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV9640 camera sensor.
+
+config VIDEO_OV9650
+ tristate "OmniVision OV9650/OV9652 sensor support"
+ select REGMAP_SCCB
+ help
+ This is a V4L2 sensor driver for the Omnivision
+ OV9650 and OV9652 camera sensors.
+
+config VIDEO_OV9734
+ tristate "OmniVision OV9734 sensor support"
+ depends on ACPI || COMPILE_TEST
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV9734 camera.
+
+ To compile this driver as a module, choose M here: the
+ module's name is ov9734.
+
+config VIDEO_RDACM20
+ tristate "IMI RDACM20 camera support"
+ select VIDEO_MAX9271_LIB
+ help
+ This driver supports the IMI RDACM20 GMSL camera, used in
+ ADAS systems.
+
+ This camera should be used in conjunction with a GMSL
+ deserialiser such as the MAX9286.
+
+config VIDEO_RDACM21
+ tristate "IMI RDACM21 camera support"
+ select VIDEO_MAX9271_LIB
+ help
+ This driver supports the IMI RDACM21 GMSL camera, used in
+ ADAS systems.
+
+ This camera should be used in conjunction with a GMSL
+ deserialiser such as the MAX9286.
+
+config VIDEO_RJ54N1
+ tristate "Sharp RJ54N1CB0C sensor support"
+ help
+ This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
+ sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rj54n1.
+
+config VIDEO_S5C73M3
+ tristate "Samsung S5C73M3 sensor support"
+ depends on SPI
+ help
+ This is a V4L2 sensor driver for Samsung S5C73M3
+ 8 Mpixel camera.
+
+config VIDEO_S5K5BAF
+ tristate "Samsung S5K5BAF sensor support"
+ help
+ This is a V4L2 sensor driver for Samsung S5K5BAF 2M
+ camera sensor with an embedded SoC image signal processor.
+
+config VIDEO_S5K6A3
+ tristate "Samsung S5K6A3 sensor support"
+ help
+ This is a V4L2 sensor driver for Samsung S5K6A3 raw
+ camera sensor.
+
+config VIDEO_ST_VGXY61
+ tristate "ST VGXY61 sensor support"
+ depends on OF && GPIOLIB
+ help
+ This is a Video4Linux2 sensor driver for the ST VGXY61
+ camera sensor.
+
+source "drivers/media/i2c/ccs/Kconfig"
+source "drivers/media/i2c/et8ek8/Kconfig"
+
+endif
+
+menu "Lens drivers"
+ visible if MEDIA_CAMERA_SUPPORT
+
+config VIDEO_AD5820
+ tristate "AD5820 lens voice coil support"
+ depends on GPIOLIB && I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select V4L2_ASYNC
+ help
+ This is a driver for the AD5820 camera lens voice coil.
+ It is used for example in Nokia N900 (RX-51).
+
+config VIDEO_AK7375
+ tristate "AK7375 lens voice coil support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
+ help
+ This is a driver for the AK7375 camera lens voice coil.
+ AK7375 is a 12 bit DAC with 120mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
+config VIDEO_DW9714
+ tristate "DW9714 lens voice coil support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
+ help
+ This is a driver for the DW9714 camera lens voice coil.
+ DW9714 is a 10 bit DAC with 120mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
+config VIDEO_DW9719
+ tristate "DW9719 lens voice coil support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
+ select V4L2_CCI_I2C
+ help
+ This is a driver for the DW9719 camera lens voice coil.
+ This is designed for linear control of voice coil motors,
+ controlled via I2C serial interface.
+
+config VIDEO_DW9768
+ tristate "DW9768 lens voice coil support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a driver for the DW9768 camera lens voice coil.
+ DW9768 is a 10 bit DAC with 100mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
+config VIDEO_DW9807_VCM
+ tristate "DW9807 lens voice coil support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
+ help
+ This is a driver for the DW9807 camera lens voice coil.
+ DW9807 is a 10 bit DAC with 100mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
+endmenu
+
+menu "Flash devices"
+ visible if MEDIA_CAMERA_SUPPORT
+
+config VIDEO_ADP1653
+ tristate "ADP1653 flash support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select V4L2_ASYNC
+ help
+ This is a driver for the ADP1653 flash controller. It is used for
+ example in Nokia N900.
+
+config VIDEO_LM3560
+ tristate "LM3560 dual flash driver support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select REGMAP_I2C
+ select V4L2_ASYNC
+ help
+ This is a driver for the lm3560 dual flash controllers. It controls
+ flash, torch LEDs.
+
+config VIDEO_LM3646
+ tristate "LM3646 dual flash driver support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select REGMAP_I2C
+ select V4L2_ASYNC
+ help
+ This is a driver for the lm3646 dual flash controllers. It controls
+ flash, torch LEDs.
+
+endmenu
+
+#
+# V4L2 I2C drivers that aren't related with Camera support
+#
+
+comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'"
+ depends on MEDIA_HIDE_ANCILLARY_SUBDRV
+#
+# Encoder / Decoder module configuration
+#
+
+menu "Audio decoders, processors and mixers"
+ visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_CS3308
+ tristate "Cirrus Logic CS3308 audio ADC"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Cirrus Logic CS3308 High Performance 8-Channel
+ Analog Volume Control
+
+ To compile this driver as a module, choose M here: the
+ module will be called cs3308.
+
+config VIDEO_CS5345
+ tristate "Cirrus Logic CS5345 audio ADC"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Cirrus Logic CS5345 24-bit, 192 kHz
+ stereo A/D converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cs5345.
+
+config VIDEO_CS53L32A
+ tristate "Cirrus Logic CS53L32A audio ADC"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Cirrus Logic CS53L32A low voltage
+ stereo A/D converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cs53l32a.
+
+config VIDEO_MSP3400
+ tristate "Micronas MSP34xx audio decoders"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Micronas MSP34xx series of audio decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called msp3400.
+
+config VIDEO_SONY_BTF_MPX
+ tristate "Sony BTF's internal MPX"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the internal MPX of the Sony BTF-PG472Z tuner.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sony-btf-mpx.
+
+config VIDEO_TDA1997X
+ tristate "NXP TDA1997x HDMI receiver"
+ depends on VIDEO_DEV && I2C
+ depends on SND_SOC
+ select HDMI
+ select SND_PCM
+ select V4L2_FWNODE
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tda1997x.
+
+config VIDEO_TDA7432
+ tristate "Philips TDA7432 audio processor"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for tda7432 audio decoder chip found on some bt8xx boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tda7432.
+
+config VIDEO_TDA9840
+ tristate "Philips TDA9840 audio processor"
+ depends on I2C
+ help
+ Support for tda9840 audio decoder chip found on some Zoran boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tda9840.
+
+config VIDEO_TEA6415C
+ tristate "Philips TEA6415C audio processor"
+ depends on I2C
+ help
+ Support for tea6415c audio decoder chip found on some bt8xx boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tea6415c.
+
+config VIDEO_TEA6420
+ tristate "Philips TEA6420 audio processor"
+ depends on I2C
+ help
+ Support for tea6420 audio decoder chip found on some bt8xx boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tea6420.
+
+config VIDEO_TLV320AIC23B
+ tristate "Texas Instruments TLV320AIC23B audio codec"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Texas Instruments TLV320AIC23B audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tlv320aic23b.
+
+config VIDEO_TVAUDIO
+ tristate "Simple audio decoder chips"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for several audio decoder chips found on some bt8xx boards:
+ Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
+ tea6320, tea6420, tda8425, ta8874z.
+ Microchip: pic16c54 based design on ProVideo PV951 board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvaudio.
+
+config VIDEO_UDA1342
+ tristate "Philips UDA1342 audio codec"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Philips UDA1342 audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called uda1342.
+
+config VIDEO_VP27SMPX
+ tristate "Panasonic VP27's internal MPX"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the internal MPX of the Panasonic VP27s tuner.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vp27smpx.
+
+config VIDEO_WM8739
+ tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Wolfson Microelectronics WM8739
+ stereo A/D Converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm8739.
+
+config VIDEO_WM8775
+ tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Wolfson Microelectronics WM8775 high
+ performance stereo A/D Converter with a 4 channel input mixer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm8775.
+
+endmenu
+
+menu "RDS decoders"
+ visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_SAA6588
+ tristate "SAA6588 Radio Chip RDS decoder support"
+ depends on VIDEO_DEV && I2C
+
+ help
+ Support for this Radio Data System (RDS) decoder. This allows
+ seeing radio station identification transmitted using this
+ standard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa6588.
+
+endmenu
+
+menu "Video decoders"
+ visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_ADV7180
+ tristate "Analog Devices ADV7180 decoder"
+ depends on GPIOLIB && VIDEO_DEV && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
+ help
+ Support for the Analog Devices ADV7180 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7180.
+
+config VIDEO_ADV7183
+ tristate "Analog Devices ADV7183 decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ V4l2 subdevice driver for the Analog Devices
+ ADV7183 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7183.
+
+config VIDEO_ADV748X
+ tristate "Analog Devices ADV748x decoder"
+ depends on VIDEO_DEV && I2C
+ depends on OF
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
+ select V4L2_FWNODE
+ help
+ V4L2 subdevice driver for the Analog Devices
+ ADV7481 and ADV7482 HDMI/Analog video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv748x.
+
+config VIDEO_ADV7604
+ tristate "Analog Devices ADV7604 decoder"
+ depends on VIDEO_DEV && I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
+ select HDMI
+ select V4L2_FWNODE
+ help
+ Support for the Analog Devices ADV7604 video decoder.
+
+ This is a Analog Devices Component/Graphics Digitizer
+ with 4:1 Multiplexed HDMI Receiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7604.
+
+config VIDEO_ADV7604_CEC
+ bool "Enable Analog Devices ADV7604 CEC support"
+ depends on VIDEO_ADV7604
+ select CEC_CORE
+ help
+ When selected the adv7604 will support the optional
+ HDMI CEC feature.
+
+config VIDEO_ADV7842
+ tristate "Analog Devices ADV7842 decoder"
+ depends on VIDEO_DEV && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select HDMI
+ help
+ Support for the Analog Devices ADV7842 video decoder.
+
+ This is a Analog Devices Component/Graphics/SD Digitizer
+ with 2:1 Multiplexed HDMI Receiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7842.
+
+config VIDEO_ADV7842_CEC
+ bool "Enable Analog Devices ADV7842 CEC support"
+ depends on VIDEO_ADV7842
+ select CEC_CORE
+ help
+ When selected the adv7842 will support the optional
+ HDMI CEC feature.
+
+config VIDEO_BT819
+ tristate "BT819A VideoStream decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for BT819A video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bt819.
+
+config VIDEO_BT856
+ tristate "BT856 VideoStream decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for BT856 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bt856.
+
+config VIDEO_BT866
+ tristate "BT866 VideoStream decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for BT866 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bt866.
+
+config VIDEO_ISL7998X
+ tristate "Intersil ISL7998x video decoder"
+ depends on VIDEO_DEV && I2C
+ depends on OF_GPIO
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ Support for Intersil ISL7998x analog to MIPI-CSI2 or
+ BT.656 decoder.
+
+config VIDEO_KS0127
+ tristate "KS0127 video decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for KS0127 video decoder.
+
+ This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
+ cards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ks0127.
+
+config VIDEO_MAX9286
+ tristate "Maxim MAX9286 GMSL deserializer support"
+ depends on I2C && I2C_MUX
+ depends on VIDEO_DEV
+ depends on OF_GPIO
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ help
+ This driver supports the Maxim MAX9286 GMSL deserializer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called max9286.
+
+config VIDEO_ML86V7667
+ tristate "OKI ML86V7667 video decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the OKI Semiconductor ML86V7667 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ml86v7667.
+
+config VIDEO_SAA7110
+ tristate "Philips SAA7110 video decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Philips SAA7110 video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7110.
+
+config VIDEO_SAA711X
+ tristate "Philips SAA7111/3/4/5 video decoders"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Philips SAA7111/3/4/5 video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7115.
+
+config VIDEO_TC358743
+ tristate "Toshiba TC358743 decoder"
+ depends on VIDEO_DEV && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select HDMI
+ select V4L2_FWNODE
+ help
+ Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tc358743.
+
+config VIDEO_TC358743_CEC
+ bool "Enable Toshiba TC358743 CEC support"
+ depends on VIDEO_TC358743
+ select CEC_CORE
+ help
+ When selected the tc358743 will support the optional
+ HDMI CEC feature.
+
+config VIDEO_TC358746
+ tristate "Toshiba TC358746 parallel-CSI2 bridge"
+ depends on VIDEO_DEV && PM && I2C
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ select V4L2_FWNODE
+ select GENERIC_PHY
+ select GENERIC_PHY_MIPI_DPHY
+ select REGMAP_I2C
+ help
+ Support for the Toshiba TC358746 parallel to MIPI CSI-2 bridge.
+ The bridge can work in both directions but currently only the
+ parallel-in / csi-out path is supported.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tc358746.
+
+config VIDEO_TVP514X
+ tristate "Texas Instruments TVP514x video decoder"
+ depends on VIDEO_DEV && I2C
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the TI TVP5146/47
+ decoder. It is currently working with the TI OMAP3 camera
+ controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp514x.
+
+config VIDEO_TVP5150
+ tristate "Texas Instruments TVP5150 video decoder"
+ depends on VIDEO_DEV && I2C
+ select V4L2_FWNODE
+ select REGMAP_I2C
+ help
+ Support for the Texas Instruments TVP5150 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp5150.
+
+config VIDEO_TVP7002
+ tristate "Texas Instruments TVP7002 video decoder"
+ depends on VIDEO_DEV && I2C
+ select V4L2_FWNODE
+ help
+ Support for the Texas Instruments TVP7002 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp7002.
+
+config VIDEO_TW2804
+ tristate "Techwell TW2804 multiple video decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Techwell tw2804 multiple video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tw2804.
+
+config VIDEO_TW9903
+ tristate "Techwell TW9903 video decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Techwell tw9903 multi-standard video decoder
+ with high quality down scaler.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tw9903.
+
+config VIDEO_TW9906
+ tristate "Techwell TW9906 video decoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Techwell tw9906 enhanced multi-standard comb filter
+ video decoder with YCbCr input support.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tw9906.
+
+config VIDEO_TW9910
+ tristate "Techwell TW9910 video decoder"
+ depends on VIDEO_DEV && I2C
+ select V4L2_ASYNC
+ help
+ Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tw9910.
+
+config VIDEO_VPX3220
+ tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for VPX322x video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpx3220.
+
+comment "Video and audio decoders"
+
+config VIDEO_SAA717X
+ tristate "Philips SAA7171/3/4 audio/video decoders"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Philips SAA7171/3/4 audio/video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa717x.
+
+source "drivers/media/i2c/cx25840/Kconfig"
+
+endmenu
+
+menu "Video encoders"
+ visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_ADV7170
+ tristate "Analog Devices ADV7170 video encoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Analog Devices ADV7170 video encoder driver
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7170.
+
+config VIDEO_ADV7175
+ tristate "Analog Devices ADV7175 video encoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Analog Devices ADV7175 video encoder driver
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7175.
+
+config VIDEO_ADV7343
+ tristate "ADV7343 video encoder"
+ depends on I2C
+ select V4L2_ASYNC
+ help
+ Support for Analog Devices I2C bus based ADV7343 encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7343.
+
+config VIDEO_ADV7393
+ tristate "ADV7393 video encoder"
+ depends on I2C
+ help
+ Support for Analog Devices I2C bus based ADV7393 encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7393.
+
+config VIDEO_ADV7511
+ tristate "Analog Devices ADV7511 encoder"
+ depends on VIDEO_DEV && I2C
+ depends on DRM_I2C_ADV7511=n || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select HDMI
+ help
+ Support for the Analog Devices ADV7511 video encoder.
+
+ This is a Analog Devices HDMI transmitter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7511.
+
+config VIDEO_ADV7511_CEC
+ bool "Enable Analog Devices ADV7511 CEC support"
+ depends on VIDEO_ADV7511
+ select CEC_CORE
+ help
+ When selected the adv7511 will support the optional
+ HDMI CEC feature.
+
+config VIDEO_AK881X
+ tristate "AK8813/AK8814 video encoders"
+ depends on I2C
+ help
+ Video output driver for AKM AK8813 and AK8814 TV encoders
+
+config VIDEO_SAA7127
+ tristate "Philips SAA7127/9 digital video encoders"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Philips SAA7127/9 digital video encoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7127.
+
+config VIDEO_SAA7185
+ tristate "Philips SAA7185 video encoder"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Philips SAA7185 video encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7185.
+
+config VIDEO_THS8200
+ tristate "Texas Instruments THS8200 video encoder"
+ depends on VIDEO_DEV && I2C
+ select V4L2_ASYNC
+ help
+ Support for the Texas Instruments THS8200 video encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ths8200.
+
+endmenu
+
+menu "Video improvement chips"
+ visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_UPD64031A
+ tristate "NEC Electronics uPD64031A Ghost Reduction"
+ depends on VIDEO_DEV && I2C
+ select V4L2_ASYNC
+ help
+ Support for the NEC Electronics uPD64031A Ghost Reduction
+ video chip. It is most often found in NTSC TV cards made for
+ Japan and is used to reduce the 'ghosting' effect that can
+ be present in analog TV broadcasts.
+
+ To compile this driver as a module, choose M here: the
+ module will be called upd64031a.
+
+config VIDEO_UPD64083
+ tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+ separation video chip. It is used to improve the quality of
+ the colors of a composite signal.
+
+ To compile this driver as a module, choose M here: the
+ module will be called upd64083.
+
+endmenu
+
+menu "Audio/Video compression chips"
+ visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_SAA6752HS
+ tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
+ depends on VIDEO_DEV && I2C
+ select CRC32
+ help
+ Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
+ audio encoder with multiplexer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa6752hs.
+
+endmenu
+
+menu "SDR tuner chips"
+ visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config SDR_MAX2175
+ tristate "Maxim 2175 RF to Bits tuner"
+ depends on VIDEO_DEV && MEDIA_SDR_SUPPORT && I2C
+ select REGMAP_I2C
+ select V4L2_ASYNC
+ help
+ Support for Maxim 2175 tuner. It is an advanced analog/digital
+ radio receiver with RF-to-Bits front-end designed for SDR solutions.
+
+ To compile this driver as a module, choose M here; the
+ module will be called max2175.
+
+endmenu
+
+menu "Miscellaneous helper chips"
+ visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_I2C
+ tristate "I2C transport video support"
+ depends on VIDEO_DEV && I2C
+ select VIDEOBUF2_VMALLOC
+ imply HWMON
+ help
+ Enable the I2C transport video support which supports the
+ following:
+ * Panasonic AMG88xx Grid-Eye Sensors
+ * Melexis MLX90640 Thermal Cameras
+
+ To compile this driver as a module, choose M here: the
+ module will be called video-i2c
+
+config VIDEO_M52790
+ tristate "Mitsubishi M52790 A/V switch"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Mitsubishi M52790 A/V switch.
+
+ To compile this driver as a module, choose M here: the
+ module will be called m52790.
+
+config VIDEO_ST_MIPID02
+ tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
+ It is used to allow usage of CSI-2 sensor with PARALLEL port
+ controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st-mipid02.
+
+config VIDEO_THS7303
+ tristate "THS7303/53 Video Amplifier"
+ depends on VIDEO_DEV && I2C
+ select V4L2_ASYNC
+ help
+ Support for TI THS7303/53 video amplifier
+
+ To compile this driver as a module, choose M here: the
+ module will be called ths7303.
+
+endmenu
+
+#
+# Video serializers and deserializers (e.g. FPD-Link)
+#
+
+menu "Video serializers and deserializers"
+
+config VIDEO_DS90UB913
+ tristate "TI DS90UB913 FPD-Link III Serializer"
+ depends on OF && I2C && VIDEO_DEV && COMMON_CLK
+ select I2C_ATR
+ select MEDIA_CONTROLLER
+ select GPIOLIB
+ select REGMAP_I2C
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ Device driver for the Texas Instruments DS90UB913
+ FPD-Link III Serializer.
+
+config VIDEO_DS90UB953
+ tristate "TI FPD-Link III/IV CSI-2 Serializers"
+ depends on OF && I2C && VIDEO_DEV && COMMON_CLK
+ select I2C_ATR
+ select MEDIA_CONTROLLER
+ select GPIOLIB
+ select REGMAP_I2C
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ Device driver for the Texas Instruments DS90UB953
+ FPD-Link III Serializer and DS90UB971 FPD-Link IV Serializer.
+
+config VIDEO_DS90UB960
+ tristate "TI FPD-Link III/IV Deserializers"
+ depends on OF && I2C && VIDEO_DEV && COMMON_CLK
+ select I2C_ATR
+ select MEDIA_CONTROLLER
+ select GPIOLIB
+ select REGMAP_I2C
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ Device driver for the Texas Instruments DS90UB960
+ FPD-Link III Deserializer and DS90UB9702 FPD-Link IV Deserializer.
+
+endmenu
+
+endif # VIDEO_DEV