summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/cx25840/cx25840-firmware.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/i2c/cx25840/cx25840-firmware.c')
-rw-r--r--drivers/media/i2c/cx25840/cx25840-firmware.c161
1 files changed, 161 insertions, 0 deletions
diff --git a/drivers/media/i2c/cx25840/cx25840-firmware.c b/drivers/media/i2c/cx25840/cx25840-firmware.c
new file mode 100644
index 0000000000..02df45ccf5
--- /dev/null
+++ b/drivers/media/i2c/cx25840/cx25840-firmware.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* cx25840 firmware functions
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/firmware.h>
+#include <media/v4l2-common.h>
+#include <media/drv-intf/cx25840.h>
+
+#include "cx25840-core.h"
+
+/*
+ * Mike Isely <isely@pobox.com> - The FWSEND parameter controls the
+ * size of the firmware chunks sent down the I2C bus to the chip.
+ * Previously this had been set to 1024 but unfortunately some I2C
+ * implementations can't transfer data in such big gulps.
+ * Specifically, the pvrusb2 driver has a hard limit of around 60
+ * bytes, due to the encapsulation there of I2C traffic into USB
+ * messages. So we have to significantly reduce this parameter.
+ */
+#define FWSEND 48
+
+#define FWDEV(x) &((x)->dev)
+
+static char *firmware = "";
+
+module_param(firmware, charp, 0444);
+
+MODULE_PARM_DESC(firmware, "Firmware image to load");
+
+static void start_fw_load(struct i2c_client *client)
+{
+ /* DL_ADDR_LB=0 DL_ADDR_HB=0 */
+ cx25840_write(client, 0x800, 0x00);
+ cx25840_write(client, 0x801, 0x00);
+ // DL_MAP=3 DL_AUTO_INC=0 DL_ENABLE=1
+ cx25840_write(client, 0x803, 0x0b);
+ /* AUTO_INC_DIS=1 */
+ cx25840_write(client, 0x000, 0x20);
+}
+
+static void end_fw_load(struct i2c_client *client)
+{
+ /* AUTO_INC_DIS=0 */
+ cx25840_write(client, 0x000, 0x00);
+ /* DL_ENABLE=0 */
+ cx25840_write(client, 0x803, 0x03);
+}
+
+#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw"
+#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw"
+#define CX25840_FIRMWARE "v4l-cx25840.fw"
+
+static const char *get_fw_name(struct i2c_client *client)
+{
+ struct cx25840_state *state = to_state(i2c_get_clientdata(client));
+
+ if (firmware[0])
+ return firmware;
+ if (is_cx2388x(state))
+ return CX2388x_FIRMWARE;
+ if (is_cx231xx(state))
+ return CX231xx_FIRMWARE;
+ return CX25840_FIRMWARE;
+}
+
+static int check_fw_load(struct i2c_client *client, int size)
+{
+ /* DL_ADDR_HB DL_ADDR_LB */
+ int s = cx25840_read(client, 0x801) << 8;
+ s |= cx25840_read(client, 0x800);
+
+ if (size != s) {
+ v4l_err(client, "firmware %s load failed\n",
+ get_fw_name(client));
+ return -EINVAL;
+ }
+
+ v4l_info(client, "loaded %s firmware (%d bytes)\n",
+ get_fw_name(client), size);
+ return 0;
+}
+
+static int fw_write(struct i2c_client *client, const u8 *data, int size)
+{
+ if (i2c_master_send(client, data, size) < size) {
+ v4l_err(client, "firmware load i2c failure\n");
+ return -ENOSYS;
+ }
+
+ return 0;
+}
+
+int cx25840_loadfw(struct i2c_client *client)
+{
+ struct cx25840_state *state = to_state(i2c_get_clientdata(client));
+ const struct firmware *fw = NULL;
+ u8 buffer[FWSEND];
+ const u8 *ptr;
+ const char *fwname = get_fw_name(client);
+ int size, retval;
+ int max_buf_size = FWSEND;
+ u32 gpio_oe = 0, gpio_da = 0;
+
+ if (is_cx2388x(state)) {
+ /* Preserve the GPIO OE and output bits */
+ gpio_oe = cx25840_read(client, 0x160);
+ gpio_da = cx25840_read(client, 0x164);
+ }
+
+ /* cx231xx cannot accept more than 16 bytes at a time */
+ if (is_cx231xx(state) && max_buf_size > 16)
+ max_buf_size = 16;
+
+ if (request_firmware(&fw, fwname, FWDEV(client)) != 0) {
+ v4l_err(client, "unable to open firmware %s\n", fwname);
+ return -EINVAL;
+ }
+
+ start_fw_load(client);
+
+ buffer[0] = 0x08;
+ buffer[1] = 0x02;
+
+ size = fw->size;
+ ptr = fw->data;
+ while (size > 0) {
+ int len = min(max_buf_size - 2, size);
+
+ memcpy(buffer + 2, ptr, len);
+
+ retval = fw_write(client, buffer, len + 2);
+
+ if (retval < 0) {
+ release_firmware(fw);
+ return retval;
+ }
+
+ size -= len;
+ ptr += len;
+ }
+
+ end_fw_load(client);
+
+ size = fw->size;
+ release_firmware(fw);
+
+ if (is_cx2388x(state)) {
+ /* Restore GPIO configuration after f/w load */
+ cx25840_write(client, 0x160, gpio_oe);
+ cx25840_write(client, 0x164, gpio_da);
+ }
+
+ return check_fw_load(client, size);
+}
+
+MODULE_FIRMWARE(CX2388x_FIRMWARE);
+MODULE_FIRMWARE(CX231xx_FIRMWARE);
+MODULE_FIRMWARE(CX25840_FIRMWARE);
+