diff options
Diffstat (limited to 'drivers/media/i2c/hi556.c')
| -rw-r--r-- | drivers/media/i2c/hi556.c | 105 |
1 files changed, 93 insertions, 12 deletions
diff --git a/drivers/media/i2c/hi556.c b/drivers/media/i2c/hi556.c index 38c77d5157..b440f386f0 100644 --- a/drivers/media/i2c/hi556.c +++ b/drivers/media/i2c/hi556.c @@ -3,10 +3,13 @@ #include <asm/unaligned.h> #include <linux/acpi.h> +#include <linux/clk.h> #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> #include <media/v4l2-fwnode.h> @@ -633,6 +636,11 @@ struct hi556 { struct v4l2_ctrl *hblank; struct v4l2_ctrl *exposure; + /* GPIOs, clocks, etc. */ + struct gpio_desc *reset_gpio; + struct clk *clk; + struct regulator *avdd; + /* Current mode */ const struct hi556_mode *cur_mode; @@ -1206,8 +1214,18 @@ static int hi556_check_hwcfg(struct device *dev) int ret = 0; unsigned int i, j; - if (!fwnode) - return -ENXIO; + /* + * Sometimes the fwnode graph is initialized by the bridge driver, + * wait for this. + */ + ep = fwnode_graph_get_next_endpoint(fwnode, NULL); + if (!ep) + return -EPROBE_DEFER; + + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); + fwnode_handle_put(ep); + if (ret) + return ret; ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk); if (ret) { @@ -1220,15 +1238,6 @@ static int hi556_check_hwcfg(struct device *dev) return -EINVAL; } - ep = fwnode_graph_get_next_endpoint(fwnode, NULL); - if (!ep) - return -ENXIO; - - ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); - fwnode_handle_put(ep); - if (ret) - return ret; - if (bus_cfg.bus.mipi_csi2.num_data_lanes != 2) { dev_err(dev, "number of CSI2 data lanes %d is not supported", bus_cfg.bus.mipi_csi2.num_data_lanes); @@ -1275,6 +1284,47 @@ static void hi556_remove(struct i2c_client *client) mutex_destroy(&hi556->mutex); } +static int hi556_suspend(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct hi556 *hi556 = to_hi556(sd); + int ret; + + gpiod_set_value_cansleep(hi556->reset_gpio, 1); + + ret = regulator_disable(hi556->avdd); + if (ret) { + dev_err(dev, "failed to disable avdd: %d\n", ret); + gpiod_set_value_cansleep(hi556->reset_gpio, 0); + return ret; + } + + clk_disable_unprepare(hi556->clk); + return 0; +} + +static int hi556_resume(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct hi556 *hi556 = to_hi556(sd); + int ret; + + ret = clk_prepare_enable(hi556->clk); + if (ret) + return ret; + + ret = regulator_enable(hi556->avdd); + if (ret) { + dev_err(dev, "failed to enable avdd: %d\n", ret); + clk_disable_unprepare(hi556->clk); + return ret; + } + + gpiod_set_value_cansleep(hi556->reset_gpio, 0); + usleep_range(5000, 5500); + return 0; +} + static int hi556_probe(struct i2c_client *client) { struct hi556 *hi556; @@ -1294,12 +1344,35 @@ static int hi556_probe(struct i2c_client *client) v4l2_i2c_subdev_init(&hi556->sd, client, &hi556_subdev_ops); + hi556->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(hi556->reset_gpio)) + return dev_err_probe(&client->dev, PTR_ERR(hi556->reset_gpio), + "failed to get reset GPIO\n"); + + hi556->clk = devm_clk_get_optional(&client->dev, "clk"); + if (IS_ERR(hi556->clk)) + return dev_err_probe(&client->dev, PTR_ERR(hi556->clk), + "failed to get clock\n"); + + /* The regulator core will provide a "dummy" regulator if necessary */ + hi556->avdd = devm_regulator_get(&client->dev, "avdd"); + if (IS_ERR(hi556->avdd)) + return dev_err_probe(&client->dev, PTR_ERR(hi556->avdd), + "failed to get avdd regulator\n"); + full_power = acpi_dev_state_d0(&client->dev); if (full_power) { + /* Ensure non ACPI managed resources are enabled */ + ret = hi556_resume(&client->dev); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to power on sensor\n"); + ret = hi556_identify_module(hi556); if (ret) { dev_err(&client->dev, "failed to find sensor: %d", ret); - return ret; + goto probe_error_power_off; } } @@ -1344,9 +1417,16 @@ probe_error_v4l2_ctrl_handler_free: v4l2_ctrl_handler_free(hi556->sd.ctrl_handler); mutex_destroy(&hi556->mutex); +probe_error_power_off: + if (full_power) + hi556_suspend(&client->dev); + return ret; } +static DEFINE_RUNTIME_DEV_PM_OPS(hi556_pm_ops, hi556_suspend, hi556_resume, + NULL); + #ifdef CONFIG_ACPI static const struct acpi_device_id hi556_acpi_ids[] = { {"INT3537"}, @@ -1360,6 +1440,7 @@ static struct i2c_driver hi556_i2c_driver = { .driver = { .name = "hi556", .acpi_match_table = ACPI_PTR(hi556_acpi_ids), + .pm = pm_sleep_ptr(&hi556_pm_ops), }, .probe = hi556_probe, .remove = hi556_remove, |