diff options
Diffstat (limited to 'drivers/media/i2c/imx274.c')
| -rw-r--r-- | drivers/media/i2c/imx274.c | 2180 |
1 files changed, 2180 insertions, 0 deletions
diff --git a/drivers/media/i2c/imx274.c b/drivers/media/i2c/imx274.c new file mode 100644 index 000000000..f33b692e6 --- /dev/null +++ b/drivers/media/i2c/imx274.c @@ -0,0 +1,2180 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * imx274.c - IMX274 CMOS Image Sensor driver + * + * Copyright (C) 2017, Leopard Imaging, Inc. + * + * Leon Luo <leonl@leopardimaging.com> + * Edwin Zou <edwinz@leopardimaging.com> + * Luca Ceresoli <luca@lucaceresoli.net> + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/v4l2-mediabus.h> +#include <linux/videodev2.h> + +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-subdev.h> + +/* + * See "SHR, SVR Setting" in datasheet + */ +#define IMX274_DEFAULT_FRAME_LENGTH (4550) +#define IMX274_MAX_FRAME_LENGTH (0x000fffff) + +/* + * See "Frame Rate Adjustment" in datasheet + */ +#define IMX274_PIXCLK_CONST1 (72000000) +#define IMX274_PIXCLK_CONST2 (1000000) + +/* + * The input gain is shifted by IMX274_GAIN_SHIFT to get + * decimal number. The real gain is + * (float)input_gain_value / (1 << IMX274_GAIN_SHIFT) + */ +#define IMX274_GAIN_SHIFT (8) +#define IMX274_GAIN_SHIFT_MASK ((1 << IMX274_GAIN_SHIFT) - 1) + +/* + * See "Analog Gain" and "Digital Gain" in datasheet + * min gain is 1X + * max gain is calculated based on IMX274_GAIN_REG_MAX + */ +#define IMX274_GAIN_REG_MAX (1957) +#define IMX274_MIN_GAIN (0x01 << IMX274_GAIN_SHIFT) +#define IMX274_MAX_ANALOG_GAIN ((2048 << IMX274_GAIN_SHIFT)\ + / (2048 - IMX274_GAIN_REG_MAX)) +#define IMX274_MAX_DIGITAL_GAIN (8) +#define IMX274_DEF_GAIN (20 << IMX274_GAIN_SHIFT) +#define IMX274_GAIN_CONST (2048) /* for gain formula */ + +/* + * 1 line time in us = (HMAX / 72), minimal is 4 lines + */ +#define IMX274_MIN_EXPOSURE_TIME (4 * 260 / 72) + +#define IMX274_MAX_WIDTH (3840) +#define IMX274_MAX_HEIGHT (2160) +#define IMX274_MAX_FRAME_RATE (120) +#define IMX274_MIN_FRAME_RATE (5) +#define IMX274_DEF_FRAME_RATE (60) + +/* + * register SHR is limited to (SVR value + 1) x VMAX value - 4 + */ +#define IMX274_SHR_LIMIT_CONST (4) + +/* + * Min and max sensor reset delay (microseconds) + */ +#define IMX274_RESET_DELAY1 (2000) +#define IMX274_RESET_DELAY2 (2200) + +/* + * shift and mask constants + */ +#define IMX274_SHIFT_8_BITS (8) +#define IMX274_SHIFT_16_BITS (16) +#define IMX274_MASK_LSB_2_BITS (0x03) +#define IMX274_MASK_LSB_3_BITS (0x07) +#define IMX274_MASK_LSB_4_BITS (0x0f) +#define IMX274_MASK_LSB_8_BITS (0x00ff) + +#define DRIVER_NAME "IMX274" + +/* + * IMX274 register definitions + */ +#define IMX274_SHR_REG_MSB 0x300D /* SHR */ +#define IMX274_SHR_REG_LSB 0x300C /* SHR */ +#define IMX274_SVR_REG_MSB 0x300F /* SVR */ +#define IMX274_SVR_REG_LSB 0x300E /* SVR */ +#define IMX274_HTRIM_EN_REG 0x3037 +#define IMX274_HTRIM_START_REG_LSB 0x3038 +#define IMX274_HTRIM_START_REG_MSB 0x3039 +#define IMX274_HTRIM_END_REG_LSB 0x303A +#define IMX274_HTRIM_END_REG_MSB 0x303B +#define IMX274_VWIDCUTEN_REG 0x30DD +#define IMX274_VWIDCUT_REG_LSB 0x30DE +#define IMX274_VWIDCUT_REG_MSB 0x30DF +#define IMX274_VWINPOS_REG_LSB 0x30E0 +#define IMX274_VWINPOS_REG_MSB 0x30E1 +#define IMX274_WRITE_VSIZE_REG_LSB 0x3130 +#define IMX274_WRITE_VSIZE_REG_MSB 0x3131 +#define IMX274_Y_OUT_SIZE_REG_LSB 0x3132 +#define IMX274_Y_OUT_SIZE_REG_MSB 0x3133 +#define IMX274_VMAX_REG_1 0x30FA /* VMAX, MSB */ +#define IMX274_VMAX_REG_2 0x30F9 /* VMAX */ +#define IMX274_VMAX_REG_3 0x30F8 /* VMAX, LSB */ +#define IMX274_HMAX_REG_MSB 0x30F7 /* HMAX */ +#define IMX274_HMAX_REG_LSB 0x30F6 /* HMAX */ +#define IMX274_ANALOG_GAIN_ADDR_LSB 0x300A /* ANALOG GAIN LSB */ +#define IMX274_ANALOG_GAIN_ADDR_MSB 0x300B /* ANALOG GAIN MSB */ +#define IMX274_DIGITAL_GAIN_REG 0x3012 /* Digital Gain */ +#define IMX274_VFLIP_REG 0x301A /* VERTICAL FLIP */ +#define IMX274_TEST_PATTERN_REG 0x303D /* TEST PATTERN */ +#define IMX274_STANDBY_REG 0x3000 /* STANDBY */ + +#define IMX274_TABLE_WAIT_MS 0 +#define IMX274_TABLE_END 1 + +/* regulator supplies */ +static const char * const imx274_supply_names[] = { + "vddl", /* IF (1.2V) supply */ + "vdig", /* Digital Core (1.8V) supply */ + "vana", /* Analog (2.8V) supply */ +}; + +#define IMX274_NUM_SUPPLIES ARRAY_SIZE(imx274_supply_names) + +/* + * imx274 I2C operation related structure + */ +struct reg_8 { + u16 addr; + u8 val; +}; + +static const struct regmap_config imx274_regmap_config = { + .reg_bits = 16, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, +}; + +/* + * Parameters for each imx274 readout mode. + * + * These are the values to configure the sensor in one of the + * implemented modes. + * + * @init_regs: registers to initialize the mode + * @wbin_ratio: width downscale factor (e.g. 3 for 1280; 3 = 3840/1280) + * @hbin_ratio: height downscale factor (e.g. 3 for 720; 3 = 2160/720) + * @min_frame_len: Minimum frame length for each mode (see "Frame Rate + * Adjustment (CSI-2)" in the datasheet) + * @min_SHR: Minimum SHR register value (see "Shutter Setting (CSI-2)" in the + * datasheet) + * @max_fps: Maximum frames per second + * @nocpiop: Number of clocks per internal offset period (see "Integration Time + * in Each Readout Drive Mode (CSI-2)" in the datasheet) + */ +struct imx274_mode { + const struct reg_8 *init_regs; + u8 wbin_ratio; + u8 hbin_ratio; + int min_frame_len; + int min_SHR; + int max_fps; + int nocpiop; +}; + +/* + * imx274 test pattern related structure + */ +enum { + TEST_PATTERN_DISABLED = 0, + TEST_PATTERN_ALL_000H, + TEST_PATTERN_ALL_FFFH, + TEST_PATTERN_ALL_555H, + TEST_PATTERN_ALL_AAAH, + TEST_PATTERN_VSP_5AH, /* VERTICAL STRIPE PATTERN 555H/AAAH */ + TEST_PATTERN_VSP_A5H, /* VERTICAL STRIPE PATTERN AAAH/555H */ + TEST_PATTERN_VSP_05H, /* VERTICAL STRIPE PATTERN 000H/555H */ + TEST_PATTERN_VSP_50H, /* VERTICAL STRIPE PATTERN 555H/000H */ + TEST_PATTERN_VSP_0FH, /* VERTICAL STRIPE PATTERN 000H/FFFH */ + TEST_PATTERN_VSP_F0H, /* VERTICAL STRIPE PATTERN FFFH/000H */ + TEST_PATTERN_H_COLOR_BARS, + TEST_PATTERN_V_COLOR_BARS, +}; + +static const char * const tp_qmenu[] = { + "Disabled", + "All 000h Pattern", + "All FFFh Pattern", + "All 555h Pattern", + "All AAAh Pattern", + "Vertical Stripe (555h / AAAh)", + "Vertical Stripe (AAAh / 555h)", + "Vertical Stripe (000h / 555h)", + "Vertical Stripe (555h / 000h)", + "Vertical Stripe (000h / FFFh)", + "Vertical Stripe (FFFh / 000h)", + "Vertical Color Bars", + "Horizontal Color Bars", +}; + +/* + * All-pixel scan mode (10-bit) + * imx274 mode1(refer to datasheet) register configuration with + * 3840x2160 resolution, raw10 data and mipi four lane output + */ +static const struct reg_8 imx274_mode1_3840x2160_raw10[] = { + {0x3004, 0x01}, + {0x3005, 0x01}, + {0x3006, 0x00}, + {0x3007, 0xa2}, + + {0x3018, 0xA2}, /* output XVS, HVS */ + + {0x306B, 0x05}, + {0x30E2, 0x01}, + + {0x30EE, 0x01}, + {0x3342, 0x0A}, + {0x3343, 0x00}, + {0x3344, 0x16}, + {0x3345, 0x00}, + {0x33A6, 0x01}, + {0x3528, 0x0E}, + {0x3554, 0x1F}, + {0x3555, 0x01}, + {0x3556, 0x01}, + {0x3557, 0x01}, + {0x3558, 0x01}, + {0x3559, 0x00}, + {0x355A, 0x00}, + {0x35BA, 0x0E}, + {0x366A, 0x1B}, + {0x366B, 0x1A}, + {0x366C, 0x19}, + {0x366D, 0x17}, + {0x3A41, 0x08}, + + {IMX274_TABLE_END, 0x00} +}; + +/* + * Horizontal/vertical 2/2-line binning + * (Horizontal and vertical weightedbinning, 10-bit) + * imx274 mode3(refer to datasheet) register configuration with + * 1920x1080 resolution, raw10 data and mipi four lane output + */ +static const struct reg_8 imx274_mode3_1920x1080_raw10[] = { + {0x3004, 0x02}, + {0x3005, 0x21}, + {0x3006, 0x00}, + {0x3007, 0xb1}, + + {0x3018, 0xA2}, /* output XVS, HVS */ + + {0x306B, 0x05}, + {0x30E2, 0x02}, + + {0x30EE, 0x01}, + {0x3342, 0x0A}, + {0x3343, 0x00}, + {0x3344, 0x1A}, + {0x3345, 0x00}, + {0x33A6, 0x01}, + {0x3528, 0x0E}, + {0x3554, 0x00}, + {0x3555, 0x01}, + {0x3556, 0x01}, + {0x3557, 0x01}, + {0x3558, 0x01}, + {0x3559, 0x00}, + {0x355A, 0x00}, + {0x35BA, 0x0E}, + {0x366A, 0x1B}, + {0x366B, 0x1A}, + {0x366C, 0x19}, + {0x366D, 0x17}, + {0x3A41, 0x08}, + + {IMX274_TABLE_END, 0x00} +}; + +/* + * Vertical 2/3 subsampling binning horizontal 3 binning + * imx274 mode5(refer to datasheet) register configuration with + * 1280x720 resolution, raw10 data and mipi four lane output + */ +static const struct reg_8 imx274_mode5_1280x720_raw10[] = { + {0x3004, 0x03}, + {0x3005, 0x31}, + {0x3006, 0x00}, + {0x3007, 0xa9}, + + {0x3018, 0xA2}, /* output XVS, HVS */ + + {0x306B, 0x05}, + {0x30E2, 0x03}, + + {0x30EE, 0x01}, + {0x3342, 0x0A}, + {0x3343, 0x00}, + {0x3344, 0x1B}, + {0x3345, 0x00}, + {0x33A6, 0x01}, + {0x3528, 0x0E}, + {0x3554, 0x00}, + {0x3555, 0x01}, + {0x3556, 0x01}, + {0x3557, 0x01}, + {0x3558, 0x01}, + {0x3559, 0x00}, + {0x355A, 0x00}, + {0x35BA, 0x0E}, + {0x366A, 0x1B}, + {0x366B, 0x19}, + {0x366C, 0x17}, + {0x366D, 0x17}, + {0x3A41, 0x04}, + + {IMX274_TABLE_END, 0x00} +}; + +/* + * Vertical 2/8 subsampling horizontal 3 binning + * imx274 mode6(refer to datasheet) register configuration with + * 1280x540 resolution, raw10 data and mipi four lane output + */ +static const struct reg_8 imx274_mode6_1280x540_raw10[] = { + {0x3004, 0x04}, /* mode setting */ + {0x3005, 0x31}, + {0x3006, 0x00}, + {0x3007, 0x02}, /* mode setting */ + + {0x3018, 0xA2}, /* output XVS, HVS */ + + {0x306B, 0x05}, + {0x30E2, 0x04}, /* mode setting */ + + {0x30EE, 0x01}, + {0x3342, 0x0A}, + {0x3343, 0x00}, + {0x3344, 0x16}, + {0x3345, 0x00}, + {0x33A6, 0x01}, + {0x3528, 0x0E}, + {0x3554, 0x1F}, + {0x3555, 0x01}, + {0x3556, 0x01}, + {0x3557, 0x01}, + {0x3558, 0x01}, + {0x3559, 0x00}, + {0x355A, 0x00}, + {0x35BA, 0x0E}, + {0x366A, 0x1B}, + {0x366B, 0x1A}, + {0x366C, 0x19}, + {0x366D, 0x17}, + {0x3A41, 0x04}, + + {IMX274_TABLE_END, 0x00} +}; + +/* + * imx274 first step register configuration for + * starting stream + */ +static const struct reg_8 imx274_start_1[] = { + {IMX274_STANDBY_REG, 0x12}, + + /* PLRD: clock settings */ + {0x3120, 0xF0}, + {0x3121, 0x00}, + {0x3122, 0x02}, + {0x3129, 0x9C}, + {0x312A, 0x02}, + {0x312D, 0x02}, + + {0x310B, 0x00}, + + /* PLSTMG */ + {0x304C, 0x00}, /* PLSTMG01 */ + {0x304D, 0x03}, + {0x331C, 0x1A}, + {0x331D, 0x00}, + {0x3502, 0x02}, + {0x3529, 0x0E}, + {0x352A, 0x0E}, + {0x352B, 0x0E}, + {0x3538, 0x0E}, + {0x3539, 0x0E}, + {0x3553, 0x00}, + {0x357D, 0x05}, + {0x357F, 0x05}, + {0x3581, 0x04}, + {0x3583, 0x76}, + {0x3587, 0x01}, + {0x35BB, 0x0E}, + {0x35BC, 0x0E}, + {0x35BD, 0x0E}, + {0x35BE, 0x0E}, + {0x35BF, 0x0E}, + {0x366E, 0x00}, + {0x366F, 0x00}, + {0x3670, 0x00}, + {0x3671, 0x00}, + + /* PSMIPI */ + {0x3304, 0x32}, /* PSMIPI1 */ + {0x3305, 0x00}, + {0x3306, 0x32}, + {0x3307, 0x00}, + {0x3590, 0x32}, + {0x3591, 0x00}, + {0x3686, 0x32}, + {0x3687, 0x00}, + + {IMX274_TABLE_END, 0x00} +}; + +/* + * imx274 second step register configuration for + * starting stream + */ +static const struct reg_8 imx274_start_2[] = { + {IMX274_STANDBY_REG, 0x00}, + {0x303E, 0x02}, /* SYS_MODE = 2 */ + {IMX274_TABLE_END, 0x00} +}; + +/* + * imx274 third step register configuration for + * starting stream + */ +static const struct reg_8 imx274_start_3[] = { + {0x30F4, 0x00}, + {0x3018, 0xA2}, /* XHS VHS OUTPUT */ + {IMX274_TABLE_END, 0x00} +}; + +/* + * imx274 register configuration for stopping stream + */ +static const struct reg_8 imx274_stop[] = { + {IMX274_STANDBY_REG, 0x01}, + {IMX274_TABLE_END, 0x00} +}; + +/* + * imx274 disable test pattern register configuration + */ +static const struct reg_8 imx274_tp_disabled[] = { + {0x303C, 0x00}, + {0x377F, 0x00}, + {0x3781, 0x00}, + {0x370B, 0x00}, + {IMX274_TABLE_END, 0x00} +}; + +/* + * imx274 test pattern register configuration + * reg 0x303D defines the test pattern modes + */ +static const struct reg_8 imx274_tp_regs[] = { + {0x303C, 0x11}, + {0x370E, 0x01}, + {0x377F, 0x01}, + {0x3781, 0x01}, + {0x370B, 0x11}, + {IMX274_TABLE_END, 0x00} +}; + +/* nocpiop happens to be the same number for the implemented modes */ +static const struct imx274_mode imx274_modes[] = { + { + /* mode 1, 4K */ + .wbin_ratio = 1, /* 3840 */ + .hbin_ratio = 1, /* 2160 */ + .init_regs = imx274_mode1_3840x2160_raw10, + .min_frame_len = 4550, + .min_SHR = 12, + .max_fps = 60, + .nocpiop = 112, + }, + { + /* mode 3, 1080p */ + .wbin_ratio = 2, /* 1920 */ + .hbin_ratio = 2, /* 1080 */ + .init_regs = imx274_mode3_1920x1080_raw10, + .min_frame_len = 2310, + .min_SHR = 8, + .max_fps = 120, + .nocpiop = 112, + }, + { + /* mode 5, 720p */ + .wbin_ratio = 3, /* 1280 */ + .hbin_ratio = 3, /* 720 */ + .init_regs = imx274_mode5_1280x720_raw10, + .min_frame_len = 2310, + .min_SHR = 8, + .max_fps = 120, + .nocpiop = 112, + }, + { + /* mode 6, 540p */ + .wbin_ratio = 3, /* 1280 */ + .hbin_ratio = 4, /* 540 */ + .init_regs = imx274_mode6_1280x540_raw10, + .min_frame_len = 2310, + .min_SHR = 4, + .max_fps = 120, + .nocpiop = 112, + }, +}; + +/* + * struct imx274_ctrls - imx274 ctrl structure + * @handler: V4L2 ctrl handler structure + * @exposure: Pointer to expsure ctrl structure + * @gain: Pointer to gain ctrl structure + * @vflip: Pointer to vflip ctrl structure + * @test_pattern: Pointer to test pattern ctrl structure + */ +struct imx274_ctrls { + struct v4l2_ctrl_handler handler; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *gain; + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *test_pattern; +}; + +/* + * struct stim274 - imx274 device structure + * @sd: V4L2 subdevice structure + * @pad: Media pad structure + * @client: Pointer to I2C client + * @ctrls: imx274 control structure + * @crop: rect to be captured + * @compose: compose rect, i.e. output resolution + * @format: V4L2 media bus frame format structure + * (width and height are in sync with the compose rect) + * @frame_rate: V4L2 frame rate structure + * @regmap: Pointer to regmap structure + * @reset_gpio: Pointer to reset gpio + * @supplies: List of analog and digital supply regulators + * @inck: Pointer to sensor input clock + * @lock: Mutex structure + * @mode: Parameters for the selected readout mode + */ +struct stimx274 { + struct v4l2_subdev sd; + struct media_pad pad; + struct i2c_client *client; + struct imx274_ctrls ctrls; + struct v4l2_rect crop; + struct v4l2_mbus_framefmt format; + struct v4l2_fract frame_interval; + struct regmap *regmap; + struct gpio_desc *reset_gpio; + struct regulator_bulk_data supplies[IMX274_NUM_SUPPLIES]; + struct clk *inck; + struct mutex lock; /* mutex lock for operations */ + const struct imx274_mode *mode; +}; + +#define IMX274_ROUND(dim, step, flags) \ + ((flags) & V4L2_SEL_FLAG_GE \ + ? roundup((dim), (step)) \ + : ((flags) & V4L2_SEL_FLAG_LE \ + ? rounddown((dim), (step)) \ + : rounddown((dim) + (step) / 2, (step)))) + +/* + * Function declaration + */ +static int imx274_set_gain(struct stimx274 *priv, struct v4l2_ctrl *ctrl); +static int imx274_set_exposure(struct stimx274 *priv, int val); +static int imx274_set_vflip(struct stimx274 *priv, int val); +static int imx274_set_test_pattern(struct stimx274 *priv, int val); +static int imx274_set_frame_interval(struct stimx274 *priv, + struct v4l2_fract frame_interval); + +static inline void msleep_range(unsigned int delay_base) +{ + usleep_range(delay_base * 1000, delay_base * 1000 + 500); +} + +/* + * v4l2_ctrl and v4l2_subdev related operations + */ +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, + struct stimx274, ctrls.handler)->sd; +} + +static inline struct stimx274 *to_imx274(struct v4l2_subdev *sd) +{ + return container_of(sd, struct stimx274, sd); +} + +/* + * Writing a register table + * + * @priv: Pointer to device + * @table: Table containing register values (with optional delays) + * + * This is used to write register table into sensor's reg map. + * + * Return: 0 on success, errors otherwise + */ +static int imx274_write_table(struct stimx274 *priv, const struct reg_8 table[]) +{ + struct regmap *regmap = priv->regmap; + int err = 0; + const struct reg_8 *next; + u8 val; + + int range_start = -1; + int range_count = 0; + u8 range_vals[16]; + int max_range_vals = ARRAY_SIZE(range_vals); + + for (next = table;; next++) { + if ((next->addr != range_start + range_count) || + (next->addr == IMX274_TABLE_END) || + (next->addr == IMX274_TABLE_WAIT_MS) || + (range_count == max_range_vals)) { + if (range_count == 1) + err = regmap_write(regmap, + range_start, range_vals[0]); + else if (range_count > 1) + err = regmap_bulk_write(regmap, range_start, + &range_vals[0], + range_count); + else + err = 0; + + if (err) + return err; + + range_start = -1; + range_count = 0; + + /* Handle special address values */ + if (next->addr == IMX274_TABLE_END) + break; + + if (next->addr == IMX274_TABLE_WAIT_MS) { + msleep_range(next->val); + continue; + } + } + + val = next->val; + + if (range_start == -1) + range_start = next->addr; + + range_vals[range_count++] = val; + } + return 0; +} + +static inline int imx274_write_reg(struct stimx274 *priv, u16 addr, u8 val) +{ + int err; + + err = regmap_write(priv->regmap, addr, val); + if (err) + dev_err(&priv->client->dev, + "%s : i2c write failed, %x = %x\n", __func__, + addr, val); + else + dev_dbg(&priv->client->dev, + "%s : addr 0x%x, val=0x%x\n", __func__, + addr, val); + return err; +} + +/** + * imx274_read_mbreg - Read a multibyte register. + * + * Uses a bulk read where possible. + * + * @priv: Pointer to device structure + * @addr: Address of the LSB register. Other registers must be + * consecutive, least-to-most significant. + * @val: Pointer to store the register value (cpu endianness) + * @nbytes: Number of bytes to read (range: [1..3]). + * Other bytes are zet to 0. + * + * Return: 0 on success, errors otherwise + */ +static int imx274_read_mbreg(struct stimx274 *priv, u16 addr, u32 *val, + size_t nbytes) +{ + __le32 val_le = 0; + int err; + + err = regmap_bulk_read(priv->regmap, addr, &val_le, nbytes); + if (err) { + dev_err(&priv->client->dev, + "%s : i2c bulk read failed, %x (%zu bytes)\n", + __func__, addr, nbytes); + } else { + *val = le32_to_cpu(val_le); + dev_dbg(&priv->client->dev, + "%s : addr 0x%x, val=0x%x (%zu bytes)\n", + __func__, addr, *val, nbytes); + } + + return err; +} + +/** + * imx274_write_mbreg - Write a multibyte register. + * + * Uses a bulk write where possible. + * + * @priv: Pointer to device structure + * @addr: Address of the LSB register. Other registers must be + * consecutive, least-to-most significant. + * @val: Value to be written to the register (cpu endianness) + * @nbytes: Number of bytes to write (range: [1..3]) + */ +static int imx274_write_mbreg(struct stimx274 *priv, u16 addr, u32 val, + size_t nbytes) +{ + __le32 val_le = cpu_to_le32(val); + int err; + + err = regmap_bulk_write(priv->regmap, addr, &val_le, nbytes); + if (err) + dev_err(&priv->client->dev, + "%s : i2c bulk write failed, %x = %x (%zu bytes)\n", + __func__, addr, val, nbytes); + else + dev_dbg(&priv->client->dev, + "%s : addr 0x%x, val=0x%x (%zu bytes)\n", + __func__, addr, val, nbytes); + return err; +} + +/* + * Set mode registers to start stream. + * @priv: Pointer to device structure + * + * Return: 0 on success, errors otherwise + */ +static int imx274_mode_regs(struct stimx274 *priv) +{ + int err = 0; + + err = imx274_write_table(priv, imx274_start_1); + if (err) + return err; + + err = imx274_write_table(priv, priv->mode->init_regs); + + return err; +} + +/* + * imx274_start_stream - Function for starting stream per mode index + * @priv: Pointer to device structure + * + * Return: 0 on success, errors otherwise + */ +static int imx274_start_stream(struct stimx274 *priv) +{ + int err = 0; + + err = __v4l2_ctrl_handler_setup(&priv->ctrls.handler); + if (err) { + dev_err(&priv->client->dev, "Error %d setup controls\n", err); + return err; + } + + /* + * Refer to "Standby Cancel Sequence when using CSI-2" in + * imx274 datasheet, it should wait 10ms or more here. + * give it 1 extra ms for margin + */ + msleep_range(11); + err = imx274_write_table(priv, imx274_start_2); + if (err) + return err; + + /* + * Refer to "Standby Cancel Sequence when using CSI-2" in + * imx274 datasheet, it should wait 7ms or more here. + * give it 1 extra ms for margin + */ + msleep_range(8); + err = imx274_write_table(priv, imx274_start_3); + if (err) + return err; + + return 0; +} + +/* + * imx274_reset - Function called to reset the sensor + * @priv: Pointer to device structure + * @rst: Input value for determining the sensor's end state after reset + * + * Set the senor in reset and then + * if rst = 0, keep it in reset; + * if rst = 1, bring it out of reset. + * + */ +static void imx274_reset(struct stimx274 *priv, int rst) +{ + gpiod_set_value_cansleep(priv->reset_gpio, 0); + usleep_range(IMX274_RESET_DELAY1, IMX274_RESET_DELAY2); + gpiod_set_value_cansleep(priv->reset_gpio, !!rst); + usleep_range(IMX274_RESET_DELAY1, IMX274_RESET_DELAY2); +} + +static int imx274_power_on(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct stimx274 *imx274 = to_imx274(sd); + int ret; + + /* keep sensor in reset before power on */ + imx274_reset(imx274, 0); + + ret = clk_prepare_enable(imx274->inck); + if (ret) { + dev_err(&imx274->client->dev, + "Failed to enable input clock: %d\n", ret); + return ret; + } + + ret = regulator_bulk_enable(IMX274_NUM_SUPPLIES, imx274->supplies); + if (ret) { + dev_err(&imx274->client->dev, + "Failed to enable regulators: %d\n", ret); + goto fail_reg; + } + + udelay(2); + imx274_reset(imx274, 1); + + return 0; + +fail_reg: + clk_disable_unprepare(imx274->inck); + return ret; +} + +static int imx274_power_off(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct stimx274 *imx274 = to_imx274(sd); + + imx274_reset(imx274, 0); + + regulator_bulk_disable(IMX274_NUM_SUPPLIES, imx274->supplies); + + clk_disable_unprepare(imx274->inck); + + return 0; +} + +static int imx274_regulators_get(struct device *dev, struct stimx274 *imx274) +{ + unsigned int i; + + for (i = 0; i < IMX274_NUM_SUPPLIES; i++) + imx274->supplies[i].supply = imx274_supply_names[i]; + + return devm_regulator_bulk_get(dev, IMX274_NUM_SUPPLIES, + imx274->supplies); +} + +/** + * imx274_s_ctrl - This is used to set the imx274 V4L2 controls + * @ctrl: V4L2 control to be set + * + * This function is used to set the V4L2 controls for the imx274 sensor. + * + * Return: 0 on success, errors otherwise + */ +static int imx274_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct stimx274 *imx274 = to_imx274(sd); + int ret = -EINVAL; + + if (!pm_runtime_get_if_in_use(&imx274->client->dev)) + return 0; + + dev_dbg(&imx274->client->dev, + "%s : s_ctrl: %s, value: %d\n", __func__, + ctrl->name, ctrl->val); + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + dev_dbg(&imx274->client->dev, + "%s : set V4L2_CID_EXPOSURE\n", __func__); + ret = imx274_set_exposure(imx274, ctrl->val); + break; + + case V4L2_CID_GAIN: + dev_dbg(&imx274->client->dev, + "%s : set V4L2_CID_GAIN\n", __func__); + ret = imx274_set_gain(imx274, ctrl); + break; + + case V4L2_CID_VFLIP: + dev_dbg(&imx274->client->dev, + "%s : set V4L2_CID_VFLIP\n", __func__); + ret = imx274_set_vflip(imx274, ctrl->val); + break; + + case V4L2_CID_TEST_PATTERN: + dev_dbg(&imx274->client->dev, + "%s : set V4L2_CID_TEST_PATTERN\n", __func__); + ret = imx274_set_test_pattern(imx274, ctrl->val); + break; + } + + pm_runtime_put(&imx274->client->dev); + + return ret; +} + +static int imx274_binning_goodness(struct stimx274 *imx274, + int w, int ask_w, + int h, int ask_h, u32 flags) +{ + struct device *dev = &imx274->client->dev; + const int goodness = 100000; + int val = 0; + + if (flags & V4L2_SEL_FLAG_GE) { + if (w < ask_w) + val -= goodness; + if (h < ask_h) + val -= goodness; + } + + if (flags & V4L2_SEL_FLAG_LE) { + if (w > ask_w) + val -= goodness; + if (h > ask_h) + val -= goodness; + } + + val -= abs(w - ask_w); + val -= abs(h - ask_h); + + dev_dbg(dev, "%s: ask %dx%d, size %dx%d, goodness %d\n", + __func__, ask_w, ask_h, w, h, val); + + return val; +} + +/** + * __imx274_change_compose - Helper function to change binning and set both + * compose and format. + * + * We have two entry points to change binning: set_fmt and + * set_selection(COMPOSE). Both have to compute the new output size + * and set it in both the compose rect and the frame format size. We + * also need to do the same things after setting cropping to restore + * 1:1 binning. + * + * This function contains the common code for these three cases, it + * has many arguments in order to accommodate the needs of all of + * them. + * + * Must be called with imx274->lock locked. + * + * @imx274: The device object + * @sd_state: The subdev state we are editing for TRY requests + * @which: V4L2_SUBDEV_FORMAT_ACTIVE or V4L2_SUBDEV_FORMAT_TRY from the caller + * @width: Input-output parameter: set to the desired width before + * the call, contains the chosen value after returning successfully + * @height: Input-output parameter for height (see @width) + * @flags: Selection flags from struct v4l2_subdev_selection, or 0 if not + * available (when called from set_fmt) + */ +static int __imx274_change_compose(struct stimx274 *imx274, + struct v4l2_subdev_state *sd_state, + u32 which, + u32 *width, + u32 *height, + u32 flags) +{ + struct device *dev = &imx274->client->dev; + const struct v4l2_rect *cur_crop; + struct v4l2_mbus_framefmt *tgt_fmt; + unsigned int i; + const struct imx274_mode *best_mode = &imx274_modes[0]; + int best_goodness = INT_MIN; + + if (which == V4L2_SUBDEV_FORMAT_TRY) { + cur_crop = &sd_state->pads->try_crop; + tgt_fmt = &sd_state->pads->try_fmt; + } else { + cur_crop = &imx274->crop; + tgt_fmt = &imx274->format; + } + + for (i = 0; i < ARRAY_SIZE(imx274_modes); i++) { + u8 wratio = imx274_modes[i].wbin_ratio; + u8 hratio = imx274_modes[i].hbin_ratio; + + int goodness = imx274_binning_goodness( + imx274, + cur_crop->width / wratio, *width, + cur_crop->height / hratio, *height, + flags); + + if (goodness >= best_goodness) { + best_goodness = goodness; + best_mode = &imx274_modes[i]; + } + } + + *width = cur_crop->width / best_mode->wbin_ratio; + *height = cur_crop->height / best_mode->hbin_ratio; + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) + imx274->mode = best_mode; + + dev_dbg(dev, "%s: selected %ux%u binning\n", + __func__, best_mode->wbin_ratio, best_mode->hbin_ratio); + + tgt_fmt->width = *width; + tgt_fmt->height = *height; + tgt_fmt->field = V4L2_FIELD_NONE; + + return 0; +} + +/** + * imx274_get_fmt - Get the pad format + * @sd: Pointer to V4L2 Sub device structure + * @sd_state: Pointer to sub device state structure + * @fmt: Pointer to pad level media bus format + * + * This function is used to get the pad format information. + * + * Return: 0 on success + */ +static int imx274_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct stimx274 *imx274 = to_imx274(sd); + + mutex_lock(&imx274->lock); + fmt->format = imx274->format; + mutex_unlock(&imx274->lock); + return 0; +} + +/** + * imx274_set_fmt - This is used to set the pad format + * @sd: Pointer to V4L2 Sub device structure + * @sd_state: Pointer to sub device state information structure + * @format: Pointer to pad level media bus format + * + * This function is used to set the pad format. + * + * Return: 0 on success + */ +static int imx274_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct v4l2_mbus_framefmt *fmt = &format->format; + struct stimx274 *imx274 = to_imx274(sd); + int err = 0; + + mutex_lock(&imx274->lock); + + err = __imx274_change_compose(imx274, sd_state, format->which, + &fmt->width, &fmt->height, 0); + + if (err) + goto out; + + /* + * __imx274_change_compose already set width and height in the + * applicable format, but we need to keep all other format + * values, so do a full copy here + */ + fmt->field = V4L2_FIELD_NONE; + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + sd_state->pads->try_fmt = *fmt; + else + imx274->format = *fmt; + +out: + mutex_unlock(&imx274->lock); + + return err; +} + +static int imx274_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct stimx274 *imx274 = to_imx274(sd); + const struct v4l2_rect *src_crop; + const struct v4l2_mbus_framefmt *src_fmt; + int ret = 0; + + if (sel->pad != 0) + return -EINVAL; + + if (sel->target == V4L2_SEL_TGT_CROP_BOUNDS) { + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = IMX274_MAX_WIDTH; + sel->r.height = IMX274_MAX_HEIGHT; + return 0; + } + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { + src_crop = &sd_state->pads->try_crop; + src_fmt = &sd_state->pads->try_fmt; + } else { + src_crop = &imx274->crop; + src_fmt = &imx274->format; + } + + mutex_lock(&imx274->lock); + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + sel->r = *src_crop; + break; + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + sel->r.top = 0; + sel->r.left = 0; + sel->r.width = src_crop->width; + sel->r.height = src_crop->height; + break; + case V4L2_SEL_TGT_COMPOSE: + sel->r.top = 0; + sel->r.left = 0; + sel->r.width = src_fmt->width; + sel->r.height = src_fmt->height; + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&imx274->lock); + + return ret; +} + +static int imx274_set_selection_crop(struct stimx274 *imx274, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct v4l2_rect *tgt_crop; + struct v4l2_rect new_crop; + bool size_changed; + + /* + * h_step could be 12 or 24 depending on the binning. But we + * won't know the binning until we choose the mode later in + * __imx274_change_compose(). Thus let's be safe and use the + * most conservative value in all cases. + */ + const u32 h_step = 24; + + new_crop.width = min_t(u32, + IMX274_ROUND(sel->r.width, h_step, sel->flags), + IMX274_MAX_WIDTH); + + /* Constraint: HTRIMMING_END - HTRIMMING_START >= 144 */ + if (new_crop.width < 144) + new_crop.width = 144; + + new_crop.left = min_t(u32, + IMX274_ROUND(sel->r.left, h_step, 0), + IMX274_MAX_WIDTH - new_crop.width); + + new_crop.height = min_t(u32, + IMX274_ROUND(sel->r.height, 2, sel->flags), + IMX274_MAX_HEIGHT); + + new_crop.top = min_t(u32, IMX274_ROUND(sel->r.top, 2, 0), + IMX274_MAX_HEIGHT - new_crop.height); + + sel->r = new_crop; + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) + tgt_crop = &sd_state->pads->try_crop; + else + tgt_crop = &imx274->crop; + + mutex_lock(&imx274->lock); + + size_changed = (new_crop.width != tgt_crop->width || + new_crop.height != tgt_crop->height); + + /* __imx274_change_compose needs the new size in *tgt_crop */ + *tgt_crop = new_crop; + + /* if crop size changed then reset the output image size */ + if (size_changed) + __imx274_change_compose(imx274, sd_state, sel->which, + &new_crop.width, &new_crop.height, + sel->flags); + + mutex_unlock(&imx274->lock); + + return 0; +} + +static int imx274_set_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct stimx274 *imx274 = to_imx274(sd); + + if (sel->pad != 0) + return -EINVAL; + + if (sel->target == V4L2_SEL_TGT_CROP) + return imx274_set_selection_crop(imx274, sd_state, sel); + + if (sel->target == V4L2_SEL_TGT_COMPOSE) { + int err; + + mutex_lock(&imx274->lock); + err = __imx274_change_compose(imx274, sd_state, sel->which, + &sel->r.width, &sel->r.height, + sel->flags); + mutex_unlock(&imx274->lock); + + /* + * __imx274_change_compose already set width and + * height in set->r, we still need to set top-left + */ + if (!err) { + sel->r.top = 0; + sel->r.left = 0; + } + + return err; + } + + return -EINVAL; +} + +static int imx274_apply_trimming(struct stimx274 *imx274) +{ + u32 h_start; + u32 h_end; + u32 hmax; + u32 v_cut; + s32 v_pos; + u32 write_v_size; + u32 y_out_size; + int err; + + h_start = imx274->crop.left + 12; + h_end = h_start + imx274->crop.width; + + /* Use the minimum allowed value of HMAX */ + /* Note: except in mode 1, (width / 16 + 23) is always < hmax_min */ + /* Note: 260 is the minimum HMAX in all implemented modes */ + hmax = max_t(u32, 260, (imx274->crop.width) / 16 + 23); + + /* invert v_pos if VFLIP */ + v_pos = imx274->ctrls.vflip->cur.val ? + (-imx274->crop.top / 2) : (imx274->crop.top / 2); + v_cut = (IMX274_MAX_HEIGHT - imx274->crop.height) / 2; + write_v_size = imx274->crop.height + 22; + y_out_size = imx274->crop.height; + + err = imx274_write_mbreg(imx274, IMX274_HMAX_REG_LSB, hmax, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_HTRIM_EN_REG, 1, 1); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_HTRIM_START_REG_LSB, + h_start, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_HTRIM_END_REG_LSB, + h_end, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_VWIDCUTEN_REG, 1, 1); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_VWIDCUT_REG_LSB, + v_cut, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_VWINPOS_REG_LSB, + v_pos, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_WRITE_VSIZE_REG_LSB, + write_v_size, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_Y_OUT_SIZE_REG_LSB, + y_out_size, 2); + + return err; +} + +/** + * imx274_g_frame_interval - Get the frame interval + * @sd: Pointer to V4L2 Sub device structure + * @fi: Pointer to V4l2 Sub device frame interval structure + * + * This function is used to get the frame interval. + * + * Return: 0 on success + */ +static int imx274_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct stimx274 *imx274 = to_imx274(sd); + + fi->interval = imx274->frame_interval; + dev_dbg(&imx274->client->dev, "%s frame rate = %d / %d\n", + __func__, imx274->frame_interval.numerator, + imx274->frame_interval.denominator); + + return 0; +} + +/** + * imx274_s_frame_interval - Set the frame interval + * @sd: Pointer to V4L2 Sub device structure + * @fi: Pointer to V4l2 Sub device frame interval structure + * + * This function is used to set the frame intervavl. + * + * Return: 0 on success + */ +static int imx274_s_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct stimx274 *imx274 = to_imx274(sd); + struct v4l2_ctrl *ctrl = imx274->ctrls.exposure; + int min, max, def; + int ret; + + ret = pm_runtime_resume_and_get(&imx274->client->dev); + if (ret < 0) + return ret; + + mutex_lock(&imx274->lock); + ret = imx274_set_frame_interval(imx274, fi->interval); + + if (!ret) { + fi->interval = imx274->frame_interval; + + /* + * exposure time range is decided by frame interval + * need to update it after frame interval changes + */ + min = IMX274_MIN_EXPOSURE_TIME; + max = fi->interval.numerator * 1000000 + / fi->interval.denominator; + def = max; + ret = __v4l2_ctrl_modify_range(ctrl, min, max, 1, def); + if (ret) { + dev_err(&imx274->client->dev, + "Exposure ctrl range update failed\n"); + goto unlock; + } + + /* update exposure time accordingly */ + imx274_set_exposure(imx274, ctrl->val); + + dev_dbg(&imx274->client->dev, "set frame interval to %uus\n", + fi->interval.numerator * 1000000 + / fi->interval.denominator); + } + +unlock: + mutex_unlock(&imx274->lock); + pm_runtime_put(&imx274->client->dev); + + return ret; +} + +/** + * imx274_load_default - load default control values + * @priv: Pointer to device structure + * + * Return: 0 on success, errors otherwise + */ +static void imx274_load_default(struct stimx274 *priv) +{ + /* load default control values */ + priv->frame_interval.numerator = 1; + priv->frame_interval.denominator = IMX274_DEF_FRAME_RATE; + priv->ctrls.exposure->val = 1000000 / IMX274_DEF_FRAME_RATE; + priv->ctrls.gain->val = IMX274_DEF_GAIN; + priv->ctrls.vflip->val = 0; + priv->ctrls.test_pattern->val = TEST_PATTERN_DISABLED; +} + +/** + * imx274_s_stream - It is used to start/stop the streaming. + * @sd: V4L2 Sub device + * @on: Flag (True / False) + * + * This function controls the start or stop of streaming for the + * imx274 sensor. + * + * Return: 0 on success, errors otherwise + */ +static int imx274_s_stream(struct v4l2_subdev *sd, int on) +{ + struct stimx274 *imx274 = to_imx274(sd); + int ret = 0; + + dev_dbg(&imx274->client->dev, "%s : %s, mode index = %td\n", __func__, + on ? "Stream Start" : "Stream Stop", + imx274->mode - &imx274_modes[0]); + + mutex_lock(&imx274->lock); + + if (on) { + ret = pm_runtime_resume_and_get(&imx274->client->dev); + if (ret < 0) { + mutex_unlock(&imx274->lock); + return ret; + } + + /* load mode registers */ + ret = imx274_mode_regs(imx274); + if (ret) + goto fail; + + ret = imx274_apply_trimming(imx274); + if (ret) + goto fail; + + /* + * update frame rate & exposure. if the last mode is different, + * HMAX could be changed. As the result, frame rate & exposure + * are changed. + * gain is not affected. + */ + ret = imx274_set_frame_interval(imx274, + imx274->frame_interval); + if (ret) + goto fail; + + /* start stream */ + ret = imx274_start_stream(imx274); + if (ret) + goto fail; + } else { + /* stop stream */ + ret = imx274_write_table(imx274, imx274_stop); + if (ret) + goto fail; + + pm_runtime_put(&imx274->client->dev); + } + + mutex_unlock(&imx274->lock); + dev_dbg(&imx274->client->dev, "%s : Done\n", __func__); + return 0; + +fail: + pm_runtime_put(&imx274->client->dev); + mutex_unlock(&imx274->lock); + dev_err(&imx274->client->dev, "s_stream failed\n"); + return ret; +} + +/* + * imx274_get_frame_length - Function for obtaining current frame length + * @priv: Pointer to device structure + * @val: Pointer to obtained value + * + * frame_length = vmax x (svr + 1), in unit of hmax. + * + * Return: 0 on success + */ +static int imx274_get_frame_length(struct stimx274 *priv, u32 *val) +{ + int err; + u32 svr; + u32 vmax; + + err = imx274_read_mbreg(priv, IMX274_SVR_REG_LSB, &svr, 2); + if (err) + goto fail; + + err = imx274_read_mbreg(priv, IMX274_VMAX_REG_3, &vmax, 3); + if (err) + goto fail; + + *val = vmax * (svr + 1); + + return 0; + +fail: + dev_err(&priv->client->dev, "%s error = %d\n", __func__, err); + return err; +} + +static int imx274_clamp_coarse_time(struct stimx274 *priv, u32 *val, + u32 *frame_length) +{ + int err; + + err = imx274_get_frame_length(priv, frame_length); + if (err) + return err; + + if (*frame_length < priv->mode->min_frame_len) + *frame_length = priv->mode->min_frame_len; + + *val = *frame_length - *val; /* convert to raw shr */ + if (*val > *frame_length - IMX274_SHR_LIMIT_CONST) + *val = *frame_length - IMX274_SHR_LIMIT_CONST; + else if (*val < priv->mode->min_SHR) + *val = priv->mode->min_SHR; + + return 0; +} + +/* + * imx274_set_digital gain - Function called when setting digital gain + * @priv: Pointer to device structure + * @dgain: Value of digital gain. + * + * Digital gain has only 4 steps: 1x, 2x, 4x, and 8x + * + * Return: 0 on success + */ +static int imx274_set_digital_gain(struct stimx274 *priv, u32 dgain) +{ + u8 reg_val; + + reg_val = ffs(dgain); + + if (reg_val) + reg_val--; + + reg_val = clamp(reg_val, (u8)0, (u8)3); + + return imx274_write_reg(priv, IMX274_DIGITAL_GAIN_REG, + reg_val & IMX274_MASK_LSB_4_BITS); +} + +/* + * imx274_set_gain - Function called when setting gain + * @priv: Pointer to device structure + * @val: Value of gain. the real value = val << IMX274_GAIN_SHIFT; + * @ctrl: v4l2 control pointer + * + * Set the gain based on input value. + * The caller should hold the mutex lock imx274->lock if necessary + * + * Return: 0 on success + */ +static int imx274_set_gain(struct stimx274 *priv, struct v4l2_ctrl *ctrl) +{ + int err; + u32 gain, analog_gain, digital_gain, gain_reg; + + gain = (u32)(ctrl->val); + + dev_dbg(&priv->client->dev, + "%s : input gain = %d.%d\n", __func__, + gain >> IMX274_GAIN_SHIFT, + ((gain & IMX274_GAIN_SHIFT_MASK) * 100) >> IMX274_GAIN_SHIFT); + + if (gain > IMX274_MAX_DIGITAL_GAIN * IMX274_MAX_ANALOG_GAIN) + gain = IMX274_MAX_DIGITAL_GAIN * IMX274_MAX_ANALOG_GAIN; + else if (gain < IMX274_MIN_GAIN) + gain = IMX274_MIN_GAIN; + + if (gain <= IMX274_MAX_ANALOG_GAIN) + digital_gain = 1; + else if (gain <= IMX274_MAX_ANALOG_GAIN * 2) + digital_gain = 2; + else if (gain <= IMX274_MAX_ANALOG_GAIN * 4) + digital_gain = 4; + else + digital_gain = IMX274_MAX_DIGITAL_GAIN; + + analog_gain = gain / digital_gain; + + dev_dbg(&priv->client->dev, + "%s : digital gain = %d, analog gain = %d.%d\n", + __func__, digital_gain, analog_gain >> IMX274_GAIN_SHIFT, + ((analog_gain & IMX274_GAIN_SHIFT_MASK) * 100) + >> IMX274_GAIN_SHIFT); + + err = imx274_set_digital_gain(priv, digital_gain); + if (err) + goto fail; + + /* convert to register value, refer to imx274 datasheet */ + gain_reg = (u32)IMX274_GAIN_CONST - + (IMX274_GAIN_CONST << IMX274_GAIN_SHIFT) / analog_gain; + if (gain_reg > IMX274_GAIN_REG_MAX) + gain_reg = IMX274_GAIN_REG_MAX; + + err = imx274_write_mbreg(priv, IMX274_ANALOG_GAIN_ADDR_LSB, gain_reg, + 2); + if (err) + goto fail; + + if (IMX274_GAIN_CONST - gain_reg == 0) { + err = -EINVAL; + goto fail; + } + + /* convert register value back to gain value */ + ctrl->val = (IMX274_GAIN_CONST << IMX274_GAIN_SHIFT) + / (IMX274_GAIN_CONST - gain_reg) * digital_gain; + + dev_dbg(&priv->client->dev, + "%s : GAIN control success, gain_reg = %d, new gain = %d\n", + __func__, gain_reg, ctrl->val); + + return 0; + +fail: + dev_err(&priv->client->dev, "%s error = %d\n", __func__, err); + return err; +} + +/* + * imx274_set_coarse_time - Function called when setting SHR value + * @priv: Pointer to device structure + * @val: Value for exposure time in number of line_length, or [HMAX] + * + * Set SHR value based on input value. + * + * Return: 0 on success + */ +static int imx274_set_coarse_time(struct stimx274 *priv, u32 *val) +{ + int err; + u32 coarse_time, frame_length; + + coarse_time = *val; + + /* convert exposure_time to appropriate SHR value */ + err = imx274_clamp_coarse_time(priv, &coarse_time, &frame_length); + if (err) + goto fail; + + err = imx274_write_mbreg(priv, IMX274_SHR_REG_LSB, coarse_time, 2); + if (err) + goto fail; + + *val = frame_length - coarse_time; + return 0; + +fail: + dev_err(&priv->client->dev, "%s error = %d\n", __func__, err); + return err; +} + +/* + * imx274_set_exposure - Function called when setting exposure time + * @priv: Pointer to device structure + * @val: Variable for exposure time, in the unit of micro-second + * + * Set exposure time based on input value. + * The caller should hold the mutex lock imx274->lock if necessary + * + * Return: 0 on success + */ +static int imx274_set_exposure(struct stimx274 *priv, int val) +{ + int err; + u32 hmax; + u32 coarse_time; /* exposure time in unit of line (HMAX)*/ + + dev_dbg(&priv->client->dev, + "%s : EXPOSURE control input = %d\n", __func__, val); + + /* step 1: convert input exposure_time (val) into number of 1[HMAX] */ + + err = imx274_read_mbreg(priv, IMX274_HMAX_REG_LSB, &hmax, 2); + if (err) + goto fail; + + if (hmax == 0) { + err = -EINVAL; + goto fail; + } + + coarse_time = (IMX274_PIXCLK_CONST1 / IMX274_PIXCLK_CONST2 * val + - priv->mode->nocpiop) / hmax; + + /* step 2: convert exposure_time into SHR value */ + + /* set SHR */ + err = imx274_set_coarse_time(priv, &coarse_time); + if (err) + goto fail; + + priv->ctrls.exposure->val = + (coarse_time * hmax + priv->mode->nocpiop) + / (IMX274_PIXCLK_CONST1 / IMX274_PIXCLK_CONST2); + + dev_dbg(&priv->client->dev, + "%s : EXPOSURE control success\n", __func__); + return 0; + +fail: + dev_err(&priv->client->dev, "%s error = %d\n", __func__, err); + + return err; +} + +/* + * imx274_set_vflip - Function called when setting vertical flip + * @priv: Pointer to device structure + * @val: Value for vflip setting + * + * Set vertical flip based on input value. + * val = 0: normal, no vertical flip + * val = 1: vertical flip enabled + * The caller should hold the mutex lock imx274->lock if necessary + * + * Return: 0 on success + */ +static int imx274_set_vflip(struct stimx274 *priv, int val) +{ + int err; + + err = imx274_write_reg(priv, IMX274_VFLIP_REG, val); + if (err) { + dev_err(&priv->client->dev, "VFLIP control error\n"); + return err; + } + + dev_dbg(&priv->client->dev, + "%s : VFLIP control success\n", __func__); + + return 0; +} + +/* + * imx274_set_test_pattern - Function called when setting test pattern + * @priv: Pointer to device structure + * @val: Variable for test pattern + * + * Set to different test patterns based on input value. + * + * Return: 0 on success + */ +static int imx274_set_test_pattern(struct stimx274 *priv, int val) +{ + int err = 0; + + if (val == TEST_PATTERN_DISABLED) { + err = imx274_write_table(priv, imx274_tp_disabled); + } else if (val <= TEST_PATTERN_V_COLOR_BARS) { + err = imx274_write_reg(priv, IMX274_TEST_PATTERN_REG, val - 1); + if (!err) + err = imx274_write_table(priv, imx274_tp_regs); + } else { + err = -EINVAL; + } + + if (!err) + dev_dbg(&priv->client->dev, + "%s : TEST PATTERN control success\n", __func__); + else + dev_err(&priv->client->dev, "%s error = %d\n", __func__, err); + + return err; +} + +/* + * imx274_set_frame_length - Function called when setting frame length + * @priv: Pointer to device structure + * @val: Variable for frame length (= VMAX, i.e. vertical drive period length) + * + * Set frame length based on input value. + * + * Return: 0 on success + */ +static int imx274_set_frame_length(struct stimx274 *priv, u32 val) +{ + int err; + u32 frame_length; + + dev_dbg(&priv->client->dev, "%s : input length = %d\n", + __func__, val); + + frame_length = (u32)val; + + err = imx274_write_mbreg(priv, IMX274_VMAX_REG_3, frame_length, 3); + if (err) + goto fail; + + return 0; + +fail: + dev_err(&priv->client->dev, "%s error = %d\n", __func__, err); + return err; +} + +/* + * imx274_set_frame_interval - Function called when setting frame interval + * @priv: Pointer to device structure + * @frame_interval: Variable for frame interval + * + * Change frame interval by updating VMAX value + * The caller should hold the mutex lock imx274->lock if necessary + * + * Return: 0 on success + */ +static int imx274_set_frame_interval(struct stimx274 *priv, + struct v4l2_fract frame_interval) +{ + int err; + u32 frame_length, req_frame_rate; + u32 svr; + u32 hmax; + + dev_dbg(&priv->client->dev, "%s: input frame interval = %d / %d", + __func__, frame_interval.numerator, + frame_interval.denominator); + + if (frame_interval.numerator == 0 || frame_interval.denominator == 0) { + frame_interval.denominator = IMX274_DEF_FRAME_RATE; + frame_interval.numerator = 1; + } + + req_frame_rate = (u32)(frame_interval.denominator + / frame_interval.numerator); + + /* boundary check */ + if (req_frame_rate > priv->mode->max_fps) { + frame_interval.numerator = 1; + frame_interval.denominator = priv->mode->max_fps; + } else if (req_frame_rate < IMX274_MIN_FRAME_RATE) { + frame_interval.numerator = 1; + frame_interval.denominator = IMX274_MIN_FRAME_RATE; + } + + /* + * VMAX = 1/frame_rate x 72M / (SVR+1) / HMAX + * frame_length (i.e. VMAX) = (frame_interval) x 72M /(SVR+1) / HMAX + */ + + err = imx274_read_mbreg(priv, IMX274_SVR_REG_LSB, &svr, 2); + if (err) + goto fail; + + dev_dbg(&priv->client->dev, + "%s : register SVR = %d\n", __func__, svr); + + err = imx274_read_mbreg(priv, IMX274_HMAX_REG_LSB, &hmax, 2); + if (err) + goto fail; + + dev_dbg(&priv->client->dev, + "%s : register HMAX = %d\n", __func__, hmax); + + if (hmax == 0 || frame_interval.denominator == 0) { + err = -EINVAL; + goto fail; + } + + frame_length = IMX274_PIXCLK_CONST1 / (svr + 1) / hmax + * frame_interval.numerator + / frame_interval.denominator; + + err = imx274_set_frame_length(priv, frame_length); + if (err) + goto fail; + + priv->frame_interval = frame_interval; + return 0; + +fail: + dev_err(&priv->client->dev, "%s error = %d\n", __func__, err); + return err; +} + +static int imx274_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index > 0) + return -EINVAL; + + /* only supported format in the driver is Raw 10 bits SRGGB */ + code->code = MEDIA_BUS_FMT_SRGGB10_1X10; + + return 0; +} + +static const struct v4l2_subdev_pad_ops imx274_pad_ops = { + .enum_mbus_code = imx274_enum_mbus_code, + .get_fmt = imx274_get_fmt, + .set_fmt = imx274_set_fmt, + .get_selection = imx274_get_selection, + .set_selection = imx274_set_selection, +}; + +static const struct v4l2_subdev_video_ops imx274_video_ops = { + .g_frame_interval = imx274_g_frame_interval, + .s_frame_interval = imx274_s_frame_interval, + .s_stream = imx274_s_stream, +}; + +static const struct v4l2_subdev_ops imx274_subdev_ops = { + .pad = &imx274_pad_ops, + .video = &imx274_video_ops, +}; + +static const struct v4l2_ctrl_ops imx274_ctrl_ops = { + .s_ctrl = imx274_s_ctrl, +}; + +static const struct of_device_id imx274_of_id_table[] = { + { .compatible = "sony,imx274" }, + { } +}; +MODULE_DEVICE_TABLE(of, imx274_of_id_table); + +static const struct i2c_device_id imx274_id[] = { + { "IMX274", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, imx274_id); + +static int imx274_fwnode_parse(struct device *dev) +{ + struct fwnode_handle *endpoint; + /* Only CSI2 is supported */ + struct v4l2_fwnode_endpoint ep = { + .bus_type = V4L2_MBUS_CSI2_DPHY + }; + int ret; + + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); + if (!endpoint) { + dev_err(dev, "Endpoint node not found\n"); + return -EINVAL; + } + + ret = v4l2_fwnode_endpoint_parse(endpoint, &ep); + fwnode_handle_put(endpoint); + if (ret == -ENXIO) { + dev_err(dev, "Unsupported bus type, should be CSI2\n"); + return ret; + } else if (ret) { + dev_err(dev, "Parsing endpoint node failed %d\n", ret); + return ret; + } + + /* Check number of data lanes, only 4 lanes supported */ + if (ep.bus.mipi_csi2.num_data_lanes != 4) { + dev_err(dev, "Invalid data lanes: %d\n", + ep.bus.mipi_csi2.num_data_lanes); + return -EINVAL; + } + + return 0; +} + +static int imx274_probe(struct i2c_client *client) +{ + struct v4l2_subdev *sd; + struct stimx274 *imx274; + struct device *dev = &client->dev; + int ret; + + /* initialize imx274 */ + imx274 = devm_kzalloc(dev, sizeof(*imx274), GFP_KERNEL); + if (!imx274) + return -ENOMEM; + + mutex_init(&imx274->lock); + + ret = imx274_fwnode_parse(dev); + if (ret) + return ret; + + imx274->inck = devm_clk_get_optional(dev, "inck"); + if (IS_ERR(imx274->inck)) + return PTR_ERR(imx274->inck); + + ret = imx274_regulators_get(dev, imx274); + if (ret) { + dev_err(dev, "Failed to get power regulators, err: %d\n", ret); + return ret; + } + + /* initialize format */ + imx274->mode = &imx274_modes[0]; + imx274->crop.width = IMX274_MAX_WIDTH; + imx274->crop.height = IMX274_MAX_HEIGHT; + imx274->format.width = imx274->crop.width / imx274->mode->wbin_ratio; + imx274->format.height = imx274->crop.height / imx274->mode->hbin_ratio; + imx274->format.field = V4L2_FIELD_NONE; + imx274->format.code = MEDIA_BUS_FMT_SRGGB10_1X10; + imx274->format.colorspace = V4L2_COLORSPACE_SRGB; + imx274->frame_interval.numerator = 1; + imx274->frame_interval.denominator = IMX274_DEF_FRAME_RATE; + + /* initialize regmap */ + imx274->regmap = devm_regmap_init_i2c(client, &imx274_regmap_config); + if (IS_ERR(imx274->regmap)) { + dev_err(dev, + "regmap init failed: %ld\n", PTR_ERR(imx274->regmap)); + ret = -ENODEV; + goto err_regmap; + } + + /* initialize subdevice */ + imx274->client = client; + sd = &imx274->sd; + v4l2_i2c_subdev_init(sd, client, &imx274_subdev_ops); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; + + /* initialize subdev media pad */ + imx274->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&sd->entity, 1, &imx274->pad); + if (ret < 0) { + dev_err(dev, + "%s : media entity init Failed %d\n", __func__, ret); + goto err_regmap; + } + + /* initialize sensor reset gpio */ + imx274->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(imx274->reset_gpio)) { + ret = dev_err_probe(dev, PTR_ERR(imx274->reset_gpio), + "Reset GPIO not setup in DT\n"); + goto err_me; + } + + /* power on the sensor */ + ret = imx274_power_on(dev); + if (ret < 0) { + dev_err(dev, "%s : imx274 power on failed\n", __func__); + goto err_me; + } + + /* initialize controls */ + ret = v4l2_ctrl_handler_init(&imx274->ctrls.handler, 4); + if (ret < 0) { + dev_err(dev, "%s : ctrl handler init Failed\n", __func__); + goto err_power_off; + } + + imx274->ctrls.handler.lock = &imx274->lock; + + /* add new controls */ + imx274->ctrls.test_pattern = v4l2_ctrl_new_std_menu_items( + &imx274->ctrls.handler, &imx274_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(tp_qmenu) - 1, 0, 0, tp_qmenu); + + imx274->ctrls.gain = v4l2_ctrl_new_std( + &imx274->ctrls.handler, + &imx274_ctrl_ops, + V4L2_CID_GAIN, IMX274_MIN_GAIN, + IMX274_MAX_DIGITAL_GAIN * IMX274_MAX_ANALOG_GAIN, 1, + IMX274_DEF_GAIN); + + imx274->ctrls.exposure = v4l2_ctrl_new_std( + &imx274->ctrls.handler, + &imx274_ctrl_ops, + V4L2_CID_EXPOSURE, IMX274_MIN_EXPOSURE_TIME, + 1000000 / IMX274_DEF_FRAME_RATE, 1, + IMX274_MIN_EXPOSURE_TIME); + + imx274->ctrls.vflip = v4l2_ctrl_new_std( + &imx274->ctrls.handler, + &imx274_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + imx274->sd.ctrl_handler = &imx274->ctrls.handler; + if (imx274->ctrls.handler.error) { + ret = imx274->ctrls.handler.error; + goto err_ctrls; + } + + /* load default control values */ + imx274_load_default(imx274); + + /* register subdevice */ + ret = v4l2_async_register_subdev(sd); + if (ret < 0) { + dev_err(dev, "%s : v4l2_async_register_subdev failed %d\n", + __func__, ret); + goto err_ctrls; + } + + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_idle(dev); + + dev_info(dev, "imx274 : imx274 probe success !\n"); + return 0; + +err_ctrls: + v4l2_ctrl_handler_free(&imx274->ctrls.handler); +err_power_off: + imx274_power_off(dev); +err_me: + media_entity_cleanup(&sd->entity); +err_regmap: + mutex_destroy(&imx274->lock); + return ret; +} + +static void imx274_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct stimx274 *imx274 = to_imx274(sd); + + pm_runtime_disable(&client->dev); + if (!pm_runtime_status_suspended(&client->dev)) + imx274_power_off(&client->dev); + pm_runtime_set_suspended(&client->dev); + + v4l2_async_unregister_subdev(sd); + v4l2_ctrl_handler_free(&imx274->ctrls.handler); + + media_entity_cleanup(&sd->entity); + mutex_destroy(&imx274->lock); +} + +static const struct dev_pm_ops imx274_pm_ops = { + SET_RUNTIME_PM_OPS(imx274_power_off, imx274_power_on, NULL) +}; + +static struct i2c_driver imx274_i2c_driver = { + .driver = { + .name = DRIVER_NAME, + .pm = &imx274_pm_ops, + .of_match_table = imx274_of_id_table, + }, + .probe = imx274_probe, + .remove = imx274_remove, + .id_table = imx274_id, +}; + +module_i2c_driver(imx274_i2c_driver); + +MODULE_AUTHOR("Leon Luo <leonl@leopardimaging.com>"); +MODULE_DESCRIPTION("IMX274 CMOS Image Sensor driver"); +MODULE_LICENSE("GPL v2"); |