diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/media/i2c/ks0127.c | 704 |
1 files changed, 704 insertions, 0 deletions
diff --git a/drivers/media/i2c/ks0127.c b/drivers/media/i2c/ks0127.c new file mode 100644 index 0000000000..5c583f57e3 --- /dev/null +++ b/drivers/media/i2c/ks0127.c @@ -0,0 +1,704 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Video Capture Driver (Video for Linux 1/2) + * for the Matrox Marvel G200,G400 and Rainbow Runner-G series + * + * This module is an interface to the KS0127 video decoder chip. + * + * Copyright (C) 1999 Ryan Drake <stiletto@mediaone.net> + * + ***************************************************************************** + * + * Modified and extended by + * Mike Bernson <mike@mlb.org> + * Gerard v.d. Horst + * Leon van Stuivenberg <l.vanstuivenberg@chello.nl> + * Gernot Ziegler <gz@lysator.liu.se> + * + * Version History: + * V1.0 Ryan Drake Initial version by Ryan Drake + * V1.1 Gerard v.d. Horst Added some debugoutput, reset the video-standard + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <media/v4l2-device.h> +#include "ks0127.h" + +MODULE_DESCRIPTION("KS0127 video decoder driver"); +MODULE_AUTHOR("Ryan Drake"); +MODULE_LICENSE("GPL"); + +/* Addresses */ +#define I2C_KS0127_ADDON 0xD8 +#define I2C_KS0127_ONBOARD 0xDA + + +/* ks0127 control registers */ +#define KS_STAT 0x00 +#define KS_CMDA 0x01 +#define KS_CMDB 0x02 +#define KS_CMDC 0x03 +#define KS_CMDD 0x04 +#define KS_HAVB 0x05 +#define KS_HAVE 0x06 +#define KS_HS1B 0x07 +#define KS_HS1E 0x08 +#define KS_HS2B 0x09 +#define KS_HS2E 0x0a +#define KS_AGC 0x0b +#define KS_HXTRA 0x0c +#define KS_CDEM 0x0d +#define KS_PORTAB 0x0e +#define KS_LUMA 0x0f +#define KS_CON 0x10 +#define KS_BRT 0x11 +#define KS_CHROMA 0x12 +#define KS_CHROMB 0x13 +#define KS_DEMOD 0x14 +#define KS_SAT 0x15 +#define KS_HUE 0x16 +#define KS_VERTIA 0x17 +#define KS_VERTIB 0x18 +#define KS_VERTIC 0x19 +#define KS_HSCLL 0x1a +#define KS_HSCLH 0x1b +#define KS_VSCLL 0x1c +#define KS_VSCLH 0x1d +#define KS_OFMTA 0x1e +#define KS_OFMTB 0x1f +#define KS_VBICTL 0x20 +#define KS_CCDAT2 0x21 +#define KS_CCDAT1 0x22 +#define KS_VBIL30 0x23 +#define KS_VBIL74 0x24 +#define KS_VBIL118 0x25 +#define KS_VBIL1512 0x26 +#define KS_TTFRAM 0x27 +#define KS_TESTA 0x28 +#define KS_UVOFFH 0x29 +#define KS_UVOFFL 0x2a +#define KS_UGAIN 0x2b +#define KS_VGAIN 0x2c +#define KS_VAVB 0x2d +#define KS_VAVE 0x2e +#define KS_CTRACK 0x2f +#define KS_POLCTL 0x30 +#define KS_REFCOD 0x31 +#define KS_INVALY 0x32 +#define KS_INVALU 0x33 +#define KS_INVALV 0x34 +#define KS_UNUSEY 0x35 +#define KS_UNUSEU 0x36 +#define KS_UNUSEV 0x37 +#define KS_USRSAV 0x38 +#define KS_USREAV 0x39 +#define KS_SHS1A 0x3a +#define KS_SHS1B 0x3b +#define KS_SHS1C 0x3c +#define KS_CMDE 0x3d +#define KS_VSDEL 0x3e +#define KS_CMDF 0x3f +#define KS_GAMMA0 0x40 +#define KS_GAMMA1 0x41 +#define KS_GAMMA2 0x42 +#define KS_GAMMA3 0x43 +#define KS_GAMMA4 0x44 +#define KS_GAMMA5 0x45 +#define KS_GAMMA6 0x46 +#define KS_GAMMA7 0x47 +#define KS_GAMMA8 0x48 +#define KS_GAMMA9 0x49 +#define KS_GAMMA10 0x4a +#define KS_GAMMA11 0x4b +#define KS_GAMMA12 0x4c +#define KS_GAMMA13 0x4d +#define KS_GAMMA14 0x4e +#define KS_GAMMA15 0x4f +#define KS_GAMMA16 0x50 +#define KS_GAMMA17 0x51 +#define KS_GAMMA18 0x52 +#define KS_GAMMA19 0x53 +#define KS_GAMMA20 0x54 +#define KS_GAMMA21 0x55 +#define KS_GAMMA22 0x56 +#define KS_GAMMA23 0x57 +#define KS_GAMMA24 0x58 +#define KS_GAMMA25 0x59 +#define KS_GAMMA26 0x5a +#define KS_GAMMA27 0x5b +#define KS_GAMMA28 0x5c +#define KS_GAMMA29 0x5d +#define KS_GAMMA30 0x5e +#define KS_GAMMA31 0x5f +#define KS_GAMMAD0 0x60 +#define KS_GAMMAD1 0x61 +#define KS_GAMMAD2 0x62 +#define KS_GAMMAD3 0x63 +#define KS_GAMMAD4 0x64 +#define KS_GAMMAD5 0x65 +#define KS_GAMMAD6 0x66 +#define KS_GAMMAD7 0x67 +#define KS_GAMMAD8 0x68 +#define KS_GAMMAD9 0x69 +#define KS_GAMMAD10 0x6a +#define KS_GAMMAD11 0x6b +#define KS_GAMMAD12 0x6c +#define KS_GAMMAD13 0x6d +#define KS_GAMMAD14 0x6e +#define KS_GAMMAD15 0x6f +#define KS_GAMMAD16 0x70 +#define KS_GAMMAD17 0x71 +#define KS_GAMMAD18 0x72 +#define KS_GAMMAD19 0x73 +#define KS_GAMMAD20 0x74 +#define KS_GAMMAD21 0x75 +#define KS_GAMMAD22 0x76 +#define KS_GAMMAD23 0x77 +#define KS_GAMMAD24 0x78 +#define KS_GAMMAD25 0x79 +#define KS_GAMMAD26 0x7a +#define KS_GAMMAD27 0x7b +#define KS_GAMMAD28 0x7c +#define KS_GAMMAD29 0x7d +#define KS_GAMMAD30 0x7e +#define KS_GAMMAD31 0x7f + + +/**************************************************************************** +* mga_dev : represents one ks0127 chip. +****************************************************************************/ + +struct adjust { + int contrast; + int bright; + int hue; + int ugain; + int vgain; +}; + +struct ks0127 { + struct v4l2_subdev sd; + v4l2_std_id norm; + u8 regs[256]; +}; + +static inline struct ks0127 *to_ks0127(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ks0127, sd); +} + + +static int debug; /* insmod parameter */ + +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug output"); + +static u8 reg_defaults[64]; + +static void init_reg_defaults(void) +{ + static int initialized; + u8 *table = reg_defaults; + + if (initialized) + return; + initialized = 1; + + table[KS_CMDA] = 0x2c; /* VSE=0, CCIR 601, autodetect standard */ + table[KS_CMDB] = 0x12; /* VALIGN=0, AGC control and input */ + table[KS_CMDC] = 0x00; /* Test options */ + /* clock & input select, write 1 to PORTA */ + table[KS_CMDD] = 0x01; + table[KS_HAVB] = 0x00; /* HAV Start Control */ + table[KS_HAVE] = 0x00; /* HAV End Control */ + table[KS_HS1B] = 0x10; /* HS1 Start Control */ + table[KS_HS1E] = 0x00; /* HS1 End Control */ + table[KS_HS2B] = 0x00; /* HS2 Start Control */ + table[KS_HS2E] = 0x00; /* HS2 End Control */ + table[KS_AGC] = 0x53; /* Manual setting for AGC */ + table[KS_HXTRA] = 0x00; /* Extra Bits for HAV and HS1/2 */ + table[KS_CDEM] = 0x00; /* Chroma Demodulation Control */ + table[KS_PORTAB] = 0x0f; /* port B is input, port A output GPPORT */ + table[KS_LUMA] = 0x01; /* Luma control */ + table[KS_CON] = 0x00; /* Contrast Control */ + table[KS_BRT] = 0x00; /* Brightness Control */ + table[KS_CHROMA] = 0x2a; /* Chroma control A */ + table[KS_CHROMB] = 0x90; /* Chroma control B */ + table[KS_DEMOD] = 0x00; /* Chroma Demodulation Control & Status */ + table[KS_SAT] = 0x00; /* Color Saturation Control*/ + table[KS_HUE] = 0x00; /* Hue Control */ + table[KS_VERTIA] = 0x00; /* Vertical Processing Control A */ + /* Vertical Processing Control B, luma 1 line delayed */ + table[KS_VERTIB] = 0x12; + table[KS_VERTIC] = 0x0b; /* Vertical Processing Control C */ + table[KS_HSCLL] = 0x00; /* Horizontal Scaling Ratio Low */ + table[KS_HSCLH] = 0x00; /* Horizontal Scaling Ratio High */ + table[KS_VSCLL] = 0x00; /* Vertical Scaling Ratio Low */ + table[KS_VSCLH] = 0x00; /* Vertical Scaling Ratio High */ + /* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */ + table[KS_OFMTA] = 0x30; + table[KS_OFMTB] = 0x00; /* Output Control B */ + /* VBI Decoder Control; 4bit fmt: avoid Y overflow */ + table[KS_VBICTL] = 0x5d; + table[KS_CCDAT2] = 0x00; /* Read Only register */ + table[KS_CCDAT1] = 0x00; /* Read Only register */ + table[KS_VBIL30] = 0xa8; /* VBI data decoding options */ + table[KS_VBIL74] = 0xaa; /* VBI data decoding options */ + table[KS_VBIL118] = 0x2a; /* VBI data decoding options */ + table[KS_VBIL1512] = 0x00; /* VBI data decoding options */ + table[KS_TTFRAM] = 0x00; /* Teletext frame alignment pattern */ + table[KS_TESTA] = 0x00; /* test register, shouldn't be written */ + table[KS_UVOFFH] = 0x00; /* UV Offset Adjustment High */ + table[KS_UVOFFL] = 0x00; /* UV Offset Adjustment Low */ + table[KS_UGAIN] = 0x00; /* U Component Gain Adjustment */ + table[KS_VGAIN] = 0x00; /* V Component Gain Adjustment */ + table[KS_VAVB] = 0x07; /* VAV Begin */ + table[KS_VAVE] = 0x00; /* VAV End */ + table[KS_CTRACK] = 0x00; /* Chroma Tracking Control */ + table[KS_POLCTL] = 0x41; /* Timing Signal Polarity Control */ + table[KS_REFCOD] = 0x80; /* Reference Code Insertion Control */ + table[KS_INVALY] = 0x10; /* Invalid Y Code */ + table[KS_INVALU] = 0x80; /* Invalid U Code */ + table[KS_INVALV] = 0x80; /* Invalid V Code */ + table[KS_UNUSEY] = 0x10; /* Unused Y Code */ + table[KS_UNUSEU] = 0x80; /* Unused U Code */ + table[KS_UNUSEV] = 0x80; /* Unused V Code */ + table[KS_USRSAV] = 0x00; /* reserved */ + table[KS_USREAV] = 0x00; /* reserved */ + table[KS_SHS1A] = 0x00; /* User Defined SHS1 A */ + /* User Defined SHS1 B, ALT656=1 on 0127B */ + table[KS_SHS1B] = 0x80; + table[KS_SHS1C] = 0x00; /* User Defined SHS1 C */ + table[KS_CMDE] = 0x00; /* Command Register E */ + table[KS_VSDEL] = 0x00; /* VS Delay Control */ + /* Command Register F, update -immediately- */ + /* (there might come no vsync)*/ + table[KS_CMDF] = 0x02; +} + + +/* We need to manually read because of a bug in the KS0127 chip. + * + * An explanation from kayork@mail.utexas.edu: + * + * During I2C reads, the KS0127 only samples for a stop condition + * during the place where the acknowledge bit should be. Any standard + * I2C implementation (correctly) throws in another clock transition + * at the 9th bit, and the KS0127 will not recognize the stop condition + * and will continue to clock out data. + * + * So we have to do the read ourself. Big deal. + * workaround in i2c-algo-bit + */ + + +static u8 ks0127_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + char val = 0; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .len = sizeof(reg), + .buf = ® + }, + { + .addr = client->addr, + .flags = I2C_M_RD | I2C_M_NO_RD_ACK, + .len = sizeof(val), + .buf = &val + } + }; + int ret; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret != ARRAY_SIZE(msgs)) + v4l2_dbg(1, debug, sd, "read error\n"); + + return val; +} + + +static void ks0127_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ks0127 *ks = to_ks0127(sd); + char msg[] = { reg, val }; + + if (i2c_master_send(client, msg, sizeof(msg)) != sizeof(msg)) + v4l2_dbg(1, debug, sd, "write error\n"); + + ks->regs[reg] = val; +} + + +/* generic bit-twiddling */ +static void ks0127_and_or(struct v4l2_subdev *sd, u8 reg, u8 and_v, u8 or_v) +{ + struct ks0127 *ks = to_ks0127(sd); + + u8 val = ks->regs[reg]; + val = (val & and_v) | or_v; + ks0127_write(sd, reg, val); +} + + + +/**************************************************************************** +* ks0127 private api +****************************************************************************/ +static void ks0127_init(struct v4l2_subdev *sd) +{ + u8 *table = reg_defaults; + int i; + + v4l2_dbg(1, debug, sd, "reset\n"); + msleep(1); + + /* initialize all registers to known values */ + /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */ + + for (i = 1; i < 33; i++) + ks0127_write(sd, i, table[i]); + + for (i = 35; i < 40; i++) + ks0127_write(sd, i, table[i]); + + for (i = 41; i < 56; i++) + ks0127_write(sd, i, table[i]); + + for (i = 58; i < 64; i++) + ks0127_write(sd, i, table[i]); + + + if ((ks0127_read(sd, KS_STAT) & 0x80) == 0) { + v4l2_dbg(1, debug, sd, "ks0122s found\n"); + return; + } + + switch (ks0127_read(sd, KS_CMDE) & 0x0f) { + case 0: + v4l2_dbg(1, debug, sd, "ks0127 found\n"); + break; + + case 9: + v4l2_dbg(1, debug, sd, "ks0127B Revision A found\n"); + break; + + default: + v4l2_dbg(1, debug, sd, "unknown revision\n"); + break; + } +} + +static int ks0127_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct ks0127 *ks = to_ks0127(sd); + + switch (input) { + case KS_INPUT_COMPOSITE_1: + case KS_INPUT_COMPOSITE_2: + case KS_INPUT_COMPOSITE_3: + case KS_INPUT_COMPOSITE_4: + case KS_INPUT_COMPOSITE_5: + case KS_INPUT_COMPOSITE_6: + v4l2_dbg(1, debug, sd, + "s_routing %d: Composite\n", input); + /* autodetect 50/60 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(sd, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(sd, KS_CMDB, 0xb0, input); + /* non-freerunning mode */ + ks0127_and_or(sd, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(sd, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00); + /* chroma trap, HYBWR=1 */ + ks0127_and_or(sd, KS_LUMA, 0x00, + (reg_defaults[KS_LUMA])|0x0c); + /* scaler fullbw, luma comb off */ + ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81); + /* manual chroma comb .25 .5 .25 */ + ks0127_and_or(sd, KS_VERTIC, 0x0f, 0x90); + + /* chroma path delay */ + ks0127_and_or(sd, KS_CHROMB, 0x0f, 0x90); + + ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_SVIDEO_1: + case KS_INPUT_SVIDEO_2: + case KS_INPUT_SVIDEO_3: + v4l2_dbg(1, debug, sd, + "s_routing %d: S-Video\n", input); + /* autodetect 50/60 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(sd, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(sd, KS_CMDB, 0xb0, input); + /* non-freerunning mode */ + ks0127_and_or(sd, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(sd, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00); + ks0127_and_or(sd, KS_LUMA, 0x00, + reg_defaults[KS_LUMA]); + /* disable luma comb */ + ks0127_and_or(sd, KS_VERTIA, 0x08, + (reg_defaults[KS_VERTIA]&0xf0)|0x01); + ks0127_and_or(sd, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + ks0127_and_or(sd, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_YUV656: + v4l2_dbg(1, debug, sd, "s_routing 15: YUV656\n"); + if (ks->norm & V4L2_STD_525_60) + /* force 60 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x03); + else + /* force 50 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x02); + + ks0127_and_or(sd, KS_CMDA, 0xff, 0x40); /* VSE=1 */ + /* set input line and VALIGN */ + ks0127_and_or(sd, KS_CMDB, 0xb0, (input | 0x40)); + /* freerunning mode, */ + /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0 VMEM=1*/ + ks0127_and_or(sd, KS_CMDC, 0x70, 0x87); + /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */ + ks0127_and_or(sd, KS_CMDD, 0x03, 0x08); + /* disable chroma demodulation */ + ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x30); + /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */ + ks0127_and_or(sd, KS_LUMA, 0x00, 0x71); + ks0127_and_or(sd, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + /* scaler fullbw, luma comb off */ + ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81); + + ks0127_and_or(sd, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_and_or(sd, KS_CON, 0x00, 0x00); + ks0127_and_or(sd, KS_BRT, 0x00, 32); /* spec: 34 */ + /* spec: 229 (e5) */ + ks0127_and_or(sd, KS_SAT, 0x00, 0xe8); + ks0127_and_or(sd, KS_HUE, 0x00, 0); + + ks0127_and_or(sd, KS_UGAIN, 0x00, 238); + ks0127_and_or(sd, KS_VGAIN, 0x00, 0x00); + + /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */ + ks0127_and_or(sd, KS_UVOFFH, 0x00, 0x4f); + ks0127_and_or(sd, KS_UVOFFL, 0x00, 0x00); + break; + + default: + v4l2_dbg(1, debug, sd, + "s_routing: Unknown input %d\n", input); + break; + } + + /* hack: CDMLPF sometimes spontaneously switches on; */ + /* force back off */ + ks0127_write(sd, KS_DEMOD, reg_defaults[KS_DEMOD]); + return 0; +} + +static int ks0127_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct ks0127 *ks = to_ks0127(sd); + + /* Set to automatic SECAM/Fsc mode */ + ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00); + + ks->norm = std; + if (std & V4L2_STD_NTSC) { + v4l2_dbg(1, debug, sd, + "s_std: NTSC_M\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20); + } else if (std & V4L2_STD_PAL_N) { + v4l2_dbg(1, debug, sd, + "s_std: NTSC_N (fixme)\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40); + } else if (std & V4L2_STD_PAL) { + v4l2_dbg(1, debug, sd, + "s_std: PAL_N\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20); + } else if (std & V4L2_STD_PAL_M) { + v4l2_dbg(1, debug, sd, + "s_std: PAL_M (fixme)\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40); + } else if (std & V4L2_STD_SECAM) { + v4l2_dbg(1, debug, sd, + "s_std: SECAM\n"); + + /* set to secam autodetection */ + ks0127_and_or(sd, KS_CHROMA, 0xdf, 0x20); + ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00); + schedule_timeout_interruptible(HZ/10+1); + + /* did it autodetect? */ + if (!(ks0127_read(sd, KS_DEMOD) & 0x40)) + /* force to secam mode */ + ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x0f); + } else { + v4l2_dbg(1, debug, sd, "s_std: Unknown norm %llx\n", + (unsigned long long)std); + } + return 0; +} + +static int ks0127_s_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "s_stream(%d)\n", enable); + if (enable) { + /* All output pins on */ + ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x30); + /* Obey the OEN pin */ + ks0127_and_or(sd, KS_CDEM, 0x7f, 0x00); + } else { + /* Video output pins off */ + ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x00); + /* Ignore the OEN pin */ + ks0127_and_or(sd, KS_CDEM, 0x7f, 0x80); + } + return 0; +} + +static int ks0127_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd) +{ + int stat = V4L2_IN_ST_NO_SIGNAL; + u8 status; + v4l2_std_id std = pstd ? *pstd : V4L2_STD_ALL; + + status = ks0127_read(sd, KS_STAT); + if (!(status & 0x20)) /* NOVID not set */ + stat = 0; + if (!(status & 0x01)) { /* CLOCK set */ + stat |= V4L2_IN_ST_NO_COLOR; + std = V4L2_STD_UNKNOWN; + } else { + if ((status & 0x08)) /* PALDET set */ + std &= V4L2_STD_PAL; + else + std &= V4L2_STD_NTSC; + } + if ((status & 0x10)) /* PALDET set */ + std &= V4L2_STD_525_60; + else + std &= V4L2_STD_625_50; + if (pstd) + *pstd = std; + if (pstatus) + *pstatus = stat; + return 0; +} + +static int ks0127_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + v4l2_dbg(1, debug, sd, "querystd\n"); + return ks0127_status(sd, NULL, std); +} + +static int ks0127_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + v4l2_dbg(1, debug, sd, "g_input_status\n"); + return ks0127_status(sd, status, NULL); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_video_ops ks0127_video_ops = { + .s_std = ks0127_s_std, + .s_routing = ks0127_s_routing, + .s_stream = ks0127_s_stream, + .querystd = ks0127_querystd, + .g_input_status = ks0127_g_input_status, +}; + +static const struct v4l2_subdev_ops ks0127_ops = { + .video = &ks0127_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + + +static int ks0127_probe(struct i2c_client *client) +{ + struct ks0127 *ks; + struct v4l2_subdev *sd; + + v4l_info(client, "%s chip found @ 0x%x (%s)\n", + client->addr == (I2C_KS0127_ADDON >> 1) ? "addon" : "on-board", + client->addr << 1, client->adapter->name); + + ks = devm_kzalloc(&client->dev, sizeof(*ks), GFP_KERNEL); + if (ks == NULL) + return -ENOMEM; + sd = &ks->sd; + v4l2_i2c_subdev_init(sd, client, &ks0127_ops); + + /* power up */ + init_reg_defaults(); + ks0127_write(sd, KS_CMDA, 0x2c); + mdelay(10); + + /* reset the device */ + ks0127_init(sd); + return 0; +} + +static void ks0127_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + ks0127_write(sd, KS_OFMTA, 0x20); /* tristate */ + ks0127_write(sd, KS_CMDA, 0x2c | 0x80); /* power down */ +} + +static const struct i2c_device_id ks0127_id[] = { + { "ks0127", 0 }, + { "ks0127b", 0 }, + { "ks0122s", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ks0127_id); + +static struct i2c_driver ks0127_driver = { + .driver = { + .name = "ks0127", + }, + .probe = ks0127_probe, + .remove = ks0127_remove, + .id_table = ks0127_id, +}; + +module_i2c_driver(ks0127_driver); |