summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/max9271.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/i2c/max9271.h')
-rw-r--r--drivers/media/i2c/max9271.h233
1 files changed, 233 insertions, 0 deletions
diff --git a/drivers/media/i2c/max9271.h b/drivers/media/i2c/max9271.h
new file mode 100644
index 000000000..dc5e4e70b
--- /dev/null
+++ b/drivers/media/i2c/max9271.h
@@ -0,0 +1,233 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017-2020 Jacopo Mondi
+ * Copyright (C) 2017-2020 Kieran Bingham
+ * Copyright (C) 2017-2020 Laurent Pinchart
+ * Copyright (C) 2017-2020 Niklas Söderlund
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ */
+
+#include <linux/i2c.h>
+
+#define MAX9271_DEFAULT_ADDR 0x40
+
+/* Register 0x02 */
+#define MAX9271_SPREAD_SPECT_0 (0 << 5)
+#define MAX9271_SPREAD_SPECT_05 (1 << 5)
+#define MAX9271_SPREAD_SPECT_15 (2 << 5)
+#define MAX9271_SPREAD_SPECT_1 (5 << 5)
+#define MAX9271_SPREAD_SPECT_2 (3 << 5)
+#define MAX9271_SPREAD_SPECT_3 (6 << 5)
+#define MAX9271_SPREAD_SPECT_4 (7 << 5)
+#define MAX9271_R02_RES BIT(4)
+#define MAX9271_PCLK_AUTODETECT (3 << 2)
+#define MAX9271_SERIAL_AUTODETECT (0x03)
+/* Register 0x04 */
+#define MAX9271_SEREN BIT(7)
+#define MAX9271_CLINKEN BIT(6)
+#define MAX9271_PRBSEN BIT(5)
+#define MAX9271_SLEEP BIT(4)
+#define MAX9271_INTTYPE_I2C (0 << 2)
+#define MAX9271_INTTYPE_UART (1 << 2)
+#define MAX9271_INTTYPE_NONE (2 << 2)
+#define MAX9271_REVCCEN BIT(1)
+#define MAX9271_FWDCCEN BIT(0)
+/* Register 0x07 */
+#define MAX9271_DBL BIT(7)
+#define MAX9271_DRS BIT(6)
+#define MAX9271_BWS BIT(5)
+#define MAX9271_ES BIT(4)
+#define MAX9271_HVEN BIT(2)
+#define MAX9271_EDC_1BIT_PARITY (0 << 0)
+#define MAX9271_EDC_6BIT_CRC (1 << 0)
+#define MAX9271_EDC_6BIT_HAMMING (2 << 0)
+/* Register 0x08 */
+#define MAX9271_INVVS BIT(7)
+#define MAX9271_INVHS BIT(6)
+#define MAX9271_REV_LOGAIN BIT(3)
+#define MAX9271_REV_HIVTH BIT(0)
+/* Register 0x09 */
+#define MAX9271_ID 0x09
+/* Register 0x0d */
+#define MAX9271_I2CLOCACK BIT(7)
+#define MAX9271_I2CSLVSH_1046NS_469NS (3 << 5)
+#define MAX9271_I2CSLVSH_938NS_352NS (2 << 5)
+#define MAX9271_I2CSLVSH_469NS_234NS (1 << 5)
+#define MAX9271_I2CSLVSH_352NS_117NS (0 << 5)
+#define MAX9271_I2CMSTBT_837KBPS (7 << 2)
+#define MAX9271_I2CMSTBT_533KBPS (6 << 2)
+#define MAX9271_I2CMSTBT_339KBPS (5 << 2)
+#define MAX9271_I2CMSTBT_173KBPS (4 << 2)
+#define MAX9271_I2CMSTBT_105KBPS (3 << 2)
+#define MAX9271_I2CMSTBT_84KBPS (2 << 2)
+#define MAX9271_I2CMSTBT_28KBPS (1 << 2)
+#define MAX9271_I2CMSTBT_8KBPS (0 << 2)
+#define MAX9271_I2CSLVTO_NONE (3 << 0)
+#define MAX9271_I2CSLVTO_1024US (2 << 0)
+#define MAX9271_I2CSLVTO_256US (1 << 0)
+#define MAX9271_I2CSLVTO_64US (0 << 0)
+/* Register 0x0f */
+#define MAX9271_GPIO5OUT BIT(5)
+#define MAX9271_GPIO4OUT BIT(4)
+#define MAX9271_GPIO3OUT BIT(3)
+#define MAX9271_GPIO2OUT BIT(2)
+#define MAX9271_GPIO1OUT BIT(1)
+#define MAX9271_GPO BIT(0)
+/* Register 0x15 */
+#define MAX9271_PCLKDET BIT(0)
+
+/**
+ * struct max9271_device - max9271 device
+ * @client: The i2c client for the max9271 instance
+ */
+struct max9271_device {
+ struct i2c_client *client;
+};
+
+/**
+ * max9271_wake_up() - Wake up the serializer by issuing an i2c transaction
+ * @dev: The max9271 device
+ *
+ * This function shall be called before any other interaction with the
+ * serializer.
+ */
+void max9271_wake_up(struct max9271_device *dev);
+
+/**
+ * max9271_set_serial_link() - Enable/disable serial link
+ * @dev: The max9271 device
+ * @enable: Serial link enable/disable flag
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_serial_link(struct max9271_device *dev, bool enable);
+
+/**
+ * max9271_configure_i2c() - Configure I2C bus parameters
+ * @dev: The max9271 device
+ * @i2c_config: The I2C bus configuration bit mask
+ *
+ * Configure MAX9271 I2C interface. The bus configuration provided in the
+ * @i2c_config parameter shall be assembled using bit values defined by the
+ * MAX9271_I2C* macros.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config);
+
+/**
+ * max9271_set_high_threshold() - Enable or disable reverse channel high
+ * threshold
+ * @dev: The max9271 device
+ * @enable: High threshold enable/disable flag
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_high_threshold(struct max9271_device *dev, bool enable);
+
+/**
+ * max9271_configure_gmsl_link() - Configure the GMSL link
+ * @dev: The max9271 device
+ *
+ * FIXME: the GMSL link configuration is currently hardcoded and performed
+ * by programming registers 0x04, 0x07 and 0x02.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_configure_gmsl_link(struct max9271_device *dev);
+
+/**
+ * max9271_set_gpios() - Set gpio lines to physical high value
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to set to high value
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]*
+ * bit values.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_clear_gpios() - Set gpio lines to physical low value
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to set to low value
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]*
+ * bit values.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_enable_gpios() - Enable gpio lines
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to enable
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO*
+ * bit values. GPO line is always enabled by default.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_disable_gpios() - Disable gpio lines
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to disable
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO*
+ * bit values. GPO line is always enabled by default and cannot be disabled.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_disable_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_verify_id() - Read and verify MAX9271 id
+ * @dev: The max9271 device
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_verify_id(struct max9271_device *dev);
+
+/**
+ * max9271_set_address() - Program a new I2C address
+ * @dev: The max9271 device
+ * @addr: The new I2C address in 7-bit format
+ *
+ * This function only takes care of programming the new I2C address @addr to
+ * in the MAX9271 chip registers, it is responsiblity of the caller to set
+ * the i2c address client to the @addr value to be able to communicate with
+ * the MAX9271 chip using the I2C framework APIs after this function returns.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_address(struct max9271_device *dev, u8 addr);
+
+/**
+ * max9271_set_deserializer_address() - Program the remote deserializer address
+ * @dev: The max9271 device
+ * @addr: The deserializer I2C address in 7-bit format
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_deserializer_address(struct max9271_device *dev, u8 addr);
+
+/**
+ * max9271_set_translation() - Program I2C address translation
+ * @dev: The max9271 device
+ * @source: The I2C source address
+ * @dest: The I2C destination address
+ *
+ * Program address translation from @source to @dest. This is required to
+ * communicate with local devices that do not support address reprogramming.
+ *
+ * TODO: The device supports translation of two address, this function currently
+ * supports a single one.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_translation(struct max9271_device *dev, u8 source, u8 dest);