diff options
Diffstat (limited to 'drivers/media/i2c/mt9m001.c')
-rw-r--r-- | drivers/media/i2c/mt9m001.c | 889 |
1 files changed, 889 insertions, 0 deletions
diff --git a/drivers/media/i2c/mt9m001.c b/drivers/media/i2c/mt9m001.c new file mode 100644 index 0000000000..ce9568e839 --- /dev/null +++ b/drivers/media/i2c/mt9m001.c @@ -0,0 +1,889 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for MT9M001 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/log2.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/videodev2.h> + +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-subdev.h> + +/* + * mt9m001 i2c address 0x5d + */ + +/* mt9m001 selected register addresses */ +#define MT9M001_CHIP_VERSION 0x00 +#define MT9M001_ROW_START 0x01 +#define MT9M001_COLUMN_START 0x02 +#define MT9M001_WINDOW_HEIGHT 0x03 +#define MT9M001_WINDOW_WIDTH 0x04 +#define MT9M001_HORIZONTAL_BLANKING 0x05 +#define MT9M001_VERTICAL_BLANKING 0x06 +#define MT9M001_OUTPUT_CONTROL 0x07 +#define MT9M001_SHUTTER_WIDTH 0x09 +#define MT9M001_FRAME_RESTART 0x0b +#define MT9M001_SHUTTER_DELAY 0x0c +#define MT9M001_RESET 0x0d +#define MT9M001_READ_OPTIONS1 0x1e +#define MT9M001_READ_OPTIONS2 0x20 +#define MT9M001_GLOBAL_GAIN 0x35 +#define MT9M001_CHIP_ENABLE 0xF1 + +#define MT9M001_MAX_WIDTH 1280 +#define MT9M001_MAX_HEIGHT 1024 +#define MT9M001_MIN_WIDTH 48 +#define MT9M001_MIN_HEIGHT 32 +#define MT9M001_COLUMN_SKIP 20 +#define MT9M001_ROW_SKIP 12 +#define MT9M001_DEFAULT_HBLANK 9 +#define MT9M001_DEFAULT_VBLANK 25 + +/* MT9M001 has only one fixed colorspace per pixelcode */ +struct mt9m001_datafmt { + u32 code; + enum v4l2_colorspace colorspace; +}; + +/* Find a data format by a pixel code in an array */ +static const struct mt9m001_datafmt *mt9m001_find_datafmt( + u32 code, const struct mt9m001_datafmt *fmt, + int n) +{ + int i; + for (i = 0; i < n; i++) + if (fmt[i].code == code) + return fmt + i; + + return NULL; +} + +static const struct mt9m001_datafmt mt9m001_colour_fmts[] = { + /* + * Order important: first natively supported, + * second supported with a GPIO extender + */ + {MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB}, + {MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, +}; + +static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = { + /* Order important - see above */ + {MEDIA_BUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, + {MEDIA_BUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, +}; + +struct mt9m001 { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct { + /* exposure/auto-exposure cluster */ + struct v4l2_ctrl *autoexposure; + struct v4l2_ctrl *exposure; + }; + bool streaming; + struct mutex mutex; + struct v4l2_rect rect; /* Sensor window */ + struct clk *clk; + struct gpio_desc *standby_gpio; + struct gpio_desc *reset_gpio; + const struct mt9m001_datafmt *fmt; + const struct mt9m001_datafmt *fmts; + int num_fmts; + unsigned int total_h; + unsigned short y_skip_top; /* Lines to skip at the top */ + struct media_pad pad; +}; + +static struct mt9m001 *to_mt9m001(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct mt9m001, subdev); +} + +static int reg_read(struct i2c_client *client, const u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int reg_write(struct i2c_client *client, const u8 reg, + const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int reg_set(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret | data); +} + +static int reg_clear(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret & ~data); +} + +struct mt9m001_reg { + u8 reg; + u16 data; +}; + +static int multi_reg_write(struct i2c_client *client, + const struct mt9m001_reg *regs, int num) +{ + int i; + + for (i = 0; i < num; i++) { + int ret = reg_write(client, regs[i].reg, regs[i].data); + + if (ret) + return ret; + } + + return 0; +} + +static int mt9m001_init(struct i2c_client *client) +{ + static const struct mt9m001_reg init_regs[] = { + /* + * Issue a soft reset. This returns all registers to their + * default values. + */ + { MT9M001_RESET, 1 }, + { MT9M001_RESET, 0 }, + /* Disable chip, synchronous option update */ + { MT9M001_OUTPUT_CONTROL, 0 } + }; + + dev_dbg(&client->dev, "%s\n", __func__); + + return multi_reg_write(client, init_regs, ARRAY_SIZE(init_regs)); +} + +static int mt9m001_apply_selection(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + const struct mt9m001_reg regs[] = { + /* Blanking and start values - default... */ + { MT9M001_HORIZONTAL_BLANKING, MT9M001_DEFAULT_HBLANK }, + { MT9M001_VERTICAL_BLANKING, MT9M001_DEFAULT_VBLANK }, + /* + * The caller provides a supported format, as verified per + * call to .set_fmt(FORMAT_TRY). + */ + { MT9M001_COLUMN_START, mt9m001->rect.left }, + { MT9M001_ROW_START, mt9m001->rect.top }, + { MT9M001_WINDOW_WIDTH, mt9m001->rect.width - 1 }, + { MT9M001_WINDOW_HEIGHT, + mt9m001->rect.height + mt9m001->y_skip_top - 1 }, + }; + + return multi_reg_write(client, regs, ARRAY_SIZE(regs)); +} + +static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + int ret = 0; + + mutex_lock(&mt9m001->mutex); + + if (mt9m001->streaming == enable) + goto done; + + if (enable) { + ret = pm_runtime_resume_and_get(&client->dev); + if (ret < 0) + goto unlock; + + ret = mt9m001_apply_selection(sd); + if (ret) + goto put_unlock; + + ret = __v4l2_ctrl_handler_setup(&mt9m001->hdl); + if (ret) + goto put_unlock; + + /* Switch to master "normal" mode */ + ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 2); + if (ret < 0) + goto put_unlock; + } else { + /* Switch to master stop sensor readout */ + reg_write(client, MT9M001_OUTPUT_CONTROL, 0); + pm_runtime_put(&client->dev); + } + + mt9m001->streaming = enable; +done: + mutex_unlock(&mt9m001->mutex); + + return 0; + +put_unlock: + pm_runtime_put(&client->dev); +unlock: + mutex_unlock(&mt9m001->mutex); + + return ret; +} + +static int mt9m001_set_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_rect rect = sel->r; + + if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE || + sel->target != V4L2_SEL_TGT_CROP) + return -EINVAL; + + if (mt9m001->fmts == mt9m001_colour_fmts) + /* + * Bayer format - even number of rows for simplicity, + * but let the user play with the top row. + */ + rect.height = ALIGN(rect.height, 2); + + /* Datasheet requirement: see register description */ + rect.width = ALIGN(rect.width, 2); + rect.left = ALIGN(rect.left, 2); + + rect.width = clamp_t(u32, rect.width, MT9M001_MIN_WIDTH, + MT9M001_MAX_WIDTH); + rect.left = clamp_t(u32, rect.left, MT9M001_COLUMN_SKIP, + MT9M001_COLUMN_SKIP + MT9M001_MAX_WIDTH - rect.width); + + rect.height = clamp_t(u32, rect.height, MT9M001_MIN_HEIGHT, + MT9M001_MAX_HEIGHT); + rect.top = clamp_t(u32, rect.top, MT9M001_ROW_SKIP, + MT9M001_ROW_SKIP + MT9M001_MAX_HEIGHT - rect.height); + + mt9m001->total_h = rect.height + mt9m001->y_skip_top + + MT9M001_DEFAULT_VBLANK; + + mt9m001->rect = rect; + + return 0; +} + +static int mt9m001_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) + return -EINVAL; + + switch (sel->target) { + case V4L2_SEL_TGT_CROP_BOUNDS: + sel->r.left = MT9M001_COLUMN_SKIP; + sel->r.top = MT9M001_ROW_SKIP; + sel->r.width = MT9M001_MAX_WIDTH; + sel->r.height = MT9M001_MAX_HEIGHT; + return 0; + case V4L2_SEL_TGT_CROP: + sel->r = mt9m001->rect; + return 0; + default: + return -EINVAL; + } +} + +static int mt9m001_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_mbus_framefmt *mf = &format->format; + + if (format->pad) + return -EINVAL; + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(sd, sd_state, 0); + format->format = *mf; + return 0; + } + + mf->width = mt9m001->rect.width; + mf->height = mt9m001->rect.height; + mf->code = mt9m001->fmt->code; + mf->colorspace = mt9m001->fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + mf->quantization = V4L2_QUANTIZATION_DEFAULT; + mf->xfer_func = V4L2_XFER_FUNC_DEFAULT; + + return 0; +} + +static int mt9m001_s_fmt(struct v4l2_subdev *sd, + const struct mt9m001_datafmt *fmt, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_subdev_selection sel = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .target = V4L2_SEL_TGT_CROP, + .r.left = mt9m001->rect.left, + .r.top = mt9m001->rect.top, + .r.width = mf->width, + .r.height = mf->height, + }; + int ret; + + /* No support for scaling so far, just crop. TODO: use skipping */ + ret = mt9m001_set_selection(sd, NULL, &sel); + if (!ret) { + mf->width = mt9m001->rect.width; + mf->height = mt9m001->rect.height; + mt9m001->fmt = fmt; + mf->colorspace = fmt->colorspace; + } + + return ret; +} + +static int mt9m001_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct v4l2_mbus_framefmt *mf = &format->format; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + const struct mt9m001_datafmt *fmt; + + if (format->pad) + return -EINVAL; + + v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH, + MT9M001_MAX_WIDTH, 1, + &mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top, + MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0); + + if (mt9m001->fmts == mt9m001_colour_fmts) + mf->height = ALIGN(mf->height - 1, 2); + + fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts, + mt9m001->num_fmts); + if (!fmt) { + fmt = mt9m001->fmt; + mf->code = fmt->code; + } + + mf->colorspace = fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + mf->quantization = V4L2_QUANTIZATION_DEFAULT; + mf->xfer_func = V4L2_XFER_FUNC_DEFAULT; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) + return mt9m001_s_fmt(sd, fmt, mf); + sd_state->pads->try_fmt = *mf; + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m001_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg > 0xff) + return -EINVAL; + + reg->size = 2; + reg->val = reg_read(client, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9m001_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg > 0xff) + return -EINVAL; + + if (reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int mt9m001_power_on(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct mt9m001 *mt9m001 = to_mt9m001(client); + int ret; + + ret = clk_prepare_enable(mt9m001->clk); + if (ret) + return ret; + + if (mt9m001->standby_gpio) { + gpiod_set_value_cansleep(mt9m001->standby_gpio, 0); + usleep_range(1000, 2000); + } + + if (mt9m001->reset_gpio) { + gpiod_set_value_cansleep(mt9m001->reset_gpio, 1); + usleep_range(1000, 2000); + gpiod_set_value_cansleep(mt9m001->reset_gpio, 0); + usleep_range(1000, 2000); + } + + return 0; +} + +static int mt9m001_power_off(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + gpiod_set_value_cansleep(mt9m001->standby_gpio, 1); + clk_disable_unprepare(mt9m001->clk); + + return 0; +} + +static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m001 *mt9m001 = container_of(ctrl->handler, + struct mt9m001, hdl); + s32 min, max; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE_AUTO: + min = mt9m001->exposure->minimum; + max = mt9m001->exposure->maximum; + mt9m001->exposure->val = + (524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min; + break; + } + return 0; +} + +static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m001 *mt9m001 = container_of(ctrl->handler, + struct mt9m001, hdl); + struct v4l2_subdev *sd = &mt9m001->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct v4l2_ctrl *exp = mt9m001->exposure; + int data; + int ret; + + if (!pm_runtime_get_if_in_use(&client->dev)) + return 0; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->val) + ret = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000); + else + ret = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000); + break; + + case V4L2_CID_GAIN: + /* See Datasheet Table 7, Gain settings. */ + if (ctrl->val <= ctrl->default_value) { + /* Pack it into 0..1 step 0.125, register values 0..8 */ + unsigned long range = ctrl->default_value - ctrl->minimum; + data = ((ctrl->val - (s32)ctrl->minimum) * 8 + range / 2) / range; + + dev_dbg(&client->dev, "Setting gain %d\n", data); + ret = reg_write(client, MT9M001_GLOBAL_GAIN, data); + } else { + /* Pack it into 1.125..15 variable step, register values 9..67 */ + /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ + unsigned long range = ctrl->maximum - ctrl->default_value - 1; + unsigned long gain = ((ctrl->val - (s32)ctrl->default_value - 1) * + 111 + range / 2) / range + 9; + + if (gain <= 32) + data = gain; + else if (gain <= 64) + data = ((gain - 32) * 16 + 16) / 32 + 80; + else + data = ((gain - 64) * 7 + 28) / 56 + 96; + + dev_dbg(&client->dev, "Setting gain from %d to %d\n", + reg_read(client, MT9M001_GLOBAL_GAIN), data); + ret = reg_write(client, MT9M001_GLOBAL_GAIN, data); + } + break; + + case V4L2_CID_EXPOSURE_AUTO: + if (ctrl->val == V4L2_EXPOSURE_MANUAL) { + unsigned long range = exp->maximum - exp->minimum; + unsigned long shutter = ((exp->val - (s32)exp->minimum) * 1048 + + range / 2) / range + 1; + + dev_dbg(&client->dev, + "Setting shutter width from %d to %lu\n", + reg_read(client, MT9M001_SHUTTER_WIDTH), shutter); + ret = reg_write(client, MT9M001_SHUTTER_WIDTH, shutter); + } else { + mt9m001->total_h = mt9m001->rect.height + + mt9m001->y_skip_top + MT9M001_DEFAULT_VBLANK; + ret = reg_write(client, MT9M001_SHUTTER_WIDTH, + mt9m001->total_h); + } + break; + default: + ret = -EINVAL; + break; + } + + pm_runtime_put(&client->dev); + + return ret; +} + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9m001_video_probe(struct i2c_client *client) +{ + struct mt9m001 *mt9m001 = to_mt9m001(client); + s32 data; + int ret; + + /* Enable the chip */ + data = reg_write(client, MT9M001_CHIP_ENABLE, 1); + dev_dbg(&client->dev, "write: %d\n", data); + + /* Read out the chip version register */ + data = reg_read(client, MT9M001_CHIP_VERSION); + + /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ + switch (data) { + case 0x8411: + case 0x8421: + mt9m001->fmts = mt9m001_colour_fmts; + mt9m001->num_fmts = ARRAY_SIZE(mt9m001_colour_fmts); + break; + case 0x8431: + mt9m001->fmts = mt9m001_monochrome_fmts; + mt9m001->num_fmts = ARRAY_SIZE(mt9m001_monochrome_fmts); + break; + default: + dev_err(&client->dev, + "No MT9M001 chip detected, register read %x\n", data); + ret = -ENODEV; + goto done; + } + + mt9m001->fmt = &mt9m001->fmts[0]; + + dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, + data == 0x8431 ? "C12STM" : "C12ST"); + + ret = mt9m001_init(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to initialise the camera\n"); + goto done; + } + + /* mt9m001_init() has reset the chip, returning registers to defaults */ + ret = v4l2_ctrl_handler_setup(&mt9m001->hdl); + +done: + return ret; +} + +static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + *lines = mt9m001->y_skip_top; + + return 0; +} + +static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = { + .g_volatile_ctrl = mt9m001_g_volatile_ctrl, + .s_ctrl = mt9m001_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { + .log_status = v4l2_ctrl_subdev_log_status, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9m001_g_register, + .s_register = mt9m001_s_register, +#endif +}; + +static int mt9m001_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_mbus_framefmt *try_fmt = + v4l2_subdev_get_try_format(sd, sd_state, 0); + + try_fmt->width = MT9M001_MAX_WIDTH; + try_fmt->height = MT9M001_MAX_HEIGHT; + try_fmt->code = mt9m001->fmts[0].code; + try_fmt->colorspace = mt9m001->fmts[0].colorspace; + try_fmt->field = V4L2_FIELD_NONE; + try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT; + try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; + + return 0; +} + +static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9m001 *mt9m001 = to_mt9m001(client); + + if (code->pad || code->index >= mt9m001->num_fmts) + return -EINVAL; + + code->code = mt9m001->fmts[code->index].code; + return 0; +} + +static int mt9m001_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) +{ + /* MT9M001 has all capture_format parameters fixed */ + cfg->type = V4L2_MBUS_PARALLEL; + cfg->bus.parallel.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_HSYNC_ACTIVE_HIGH | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | + V4L2_MBUS_DATA_ACTIVE_HIGH | + V4L2_MBUS_MASTER; + + return 0; +} + +static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { + .s_stream = mt9m001_s_stream, +}; + +static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { + .g_skip_top_lines = mt9m001_g_skip_top_lines, +}; + +static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = { + .init_cfg = mt9m001_init_cfg, + .enum_mbus_code = mt9m001_enum_mbus_code, + .get_selection = mt9m001_get_selection, + .set_selection = mt9m001_set_selection, + .get_fmt = mt9m001_get_fmt, + .set_fmt = mt9m001_set_fmt, + .get_mbus_config = mt9m001_get_mbus_config, +}; + +static const struct v4l2_subdev_ops mt9m001_subdev_ops = { + .core = &mt9m001_subdev_core_ops, + .video = &mt9m001_subdev_video_ops, + .sensor = &mt9m001_subdev_sensor_ops, + .pad = &mt9m001_subdev_pad_ops, +}; + +static int mt9m001_probe(struct i2c_client *client) +{ + struct mt9m001 *mt9m001; + struct i2c_adapter *adapter = client->adapter; + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9m001 = devm_kzalloc(&client->dev, sizeof(*mt9m001), GFP_KERNEL); + if (!mt9m001) + return -ENOMEM; + + mt9m001->clk = devm_clk_get(&client->dev, NULL); + if (IS_ERR(mt9m001->clk)) + return PTR_ERR(mt9m001->clk); + + mt9m001->standby_gpio = devm_gpiod_get_optional(&client->dev, "standby", + GPIOD_OUT_LOW); + if (IS_ERR(mt9m001->standby_gpio)) + return PTR_ERR(mt9m001->standby_gpio); + + mt9m001->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(mt9m001->reset_gpio)) + return PTR_ERR(mt9m001->reset_gpio); + + v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops); + mt9m001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS; + v4l2_ctrl_handler_init(&mt9m001->hdl, 4); + v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, + V4L2_CID_EXPOSURE, 1, 255, 1, 255); + /* + * Simulated autoexposure. If enabled, we calculate shutter width + * ourselves in the driver based on vertical blanking and frame width + */ + mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl, + &mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, + V4L2_EXPOSURE_AUTO); + mt9m001->subdev.ctrl_handler = &mt9m001->hdl; + if (mt9m001->hdl.error) + return mt9m001->hdl.error; + + v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure, + V4L2_EXPOSURE_MANUAL, true); + + mutex_init(&mt9m001->mutex); + mt9m001->hdl.lock = &mt9m001->mutex; + + /* Second stage probe - when a capture adapter is there */ + mt9m001->y_skip_top = 0; + mt9m001->rect.left = MT9M001_COLUMN_SKIP; + mt9m001->rect.top = MT9M001_ROW_SKIP; + mt9m001->rect.width = MT9M001_MAX_WIDTH; + mt9m001->rect.height = MT9M001_MAX_HEIGHT; + + ret = mt9m001_power_on(&client->dev); + if (ret) + goto error_hdl_free; + + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + + ret = mt9m001_video_probe(client); + if (ret) + goto error_power_off; + + mt9m001->pad.flags = MEDIA_PAD_FL_SOURCE; + mt9m001->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&mt9m001->subdev.entity, 1, &mt9m001->pad); + if (ret) + goto error_power_off; + + ret = v4l2_async_register_subdev(&mt9m001->subdev); + if (ret) + goto error_entity_cleanup; + + pm_runtime_idle(&client->dev); + + return 0; + +error_entity_cleanup: + media_entity_cleanup(&mt9m001->subdev.entity); +error_power_off: + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + mt9m001_power_off(&client->dev); + +error_hdl_free: + v4l2_ctrl_handler_free(&mt9m001->hdl); + mutex_destroy(&mt9m001->mutex); + + return ret; +} + +static void mt9m001_remove(struct i2c_client *client) +{ + struct mt9m001 *mt9m001 = to_mt9m001(client); + + /* + * As it increments RPM usage_count even on errors, we don't need to + * check the returned code here. + */ + pm_runtime_get_sync(&client->dev); + + v4l2_async_unregister_subdev(&mt9m001->subdev); + media_entity_cleanup(&mt9m001->subdev.entity); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + mt9m001_power_off(&client->dev); + + v4l2_ctrl_handler_free(&mt9m001->hdl); + mutex_destroy(&mt9m001->mutex); +} + +static const struct i2c_device_id mt9m001_id[] = { + { "mt9m001", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9m001_id); + +static const struct dev_pm_ops mt9m001_pm_ops = { + SET_RUNTIME_PM_OPS(mt9m001_power_off, mt9m001_power_on, NULL) +}; + +static const struct of_device_id mt9m001_of_match[] = { + { .compatible = "onnn,mt9m001", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt9m001_of_match); + +static struct i2c_driver mt9m001_i2c_driver = { + .driver = { + .name = "mt9m001", + .pm = &mt9m001_pm_ops, + .of_match_table = mt9m001_of_match, + }, + .probe = mt9m001_probe, + .remove = mt9m001_remove, + .id_table = mt9m001_id, +}; + +module_i2c_driver(mt9m001_i2c_driver); + +MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); +MODULE_LICENSE("GPL v2"); |