1 files changed, 379 insertions, 0 deletions

diff --git a/drivers/media/pci/bt8xx/bttv-vbi.c b/drivers/media/pci/bt8xx/bttv-vbi.c
new file mode 100644
index 0000000000..e489a3acb4
--- /dev/null
+++ b/drivers/media/pci/bt8xx/bttv-vbi.c
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+
+    bttv - Bt848 frame grabber driver
+    vbi interface
+
+    (c) 2002 Gerd Knorr <kraxel@bytesex.org>
+
+    Copyright (C) 2005, 2006 Michael H. Schimek <mschimek@gmx.at>
+    Sponsored by OPQ Systems AB
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/kdev_t.h>
+#include <media/v4l2-ioctl.h>
+#include <asm/io.h>
+#include "bttvp.h"
+
+/* Offset from line sync pulse leading edge (0H) to start of VBI capture,
+   in fCLKx2 pixels.  According to the datasheet, VBI capture starts
+   VBI_HDELAY fCLKx1 pixels from the tailing edgeof /HRESET, and /HRESET
+   is 64 fCLKx1 pixels wide.  VBI_HDELAY is set to 0, so this should be
+   (64 + 0) * 2 = 128 fCLKx2 pixels.  But it's not!  The datasheet is
+   Just Plain Wrong.  The real value appears to be different for
+   different revisions of the bt8x8 chips, and to be affected by the
+   horizontal scaling factor.  Experimentally, the value is measured
+   to be about 244.  */
+#define VBI_OFFSET 244
+
+static unsigned int vbibufs = 4;
+static unsigned int vbi_debug;
+
+module_param(vbibufs,   int, 0444);
+module_param(vbi_debug, int, 0644);
+MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32, default 4");
+MODULE_PARM_DESC(vbi_debug,"vbi code debug messages, default is 0 (no)");
+
+#ifdef dprintk
+# undef dprintk
+#endif
+#define dprintk(fmt, ...)						\
+do {									\
+	if (vbi_debug)							\
+		pr_debug("%d: " fmt, btv->c.nr, ##__VA_ARGS__);		\
+} while (0)
+
+#define IMAGE_SIZE(fmt) \
+	(((fmt)->count[0] + (fmt)->count[1]) * (fmt)->samples_per_line)
+
+/* ----------------------------------------------------------------------- */
+/* vbi risc code + mm                                                      */
+
+static int queue_setup_vbi(struct vb2_queue *q, unsigned int *num_buffers,
+			   unsigned int *num_planes, unsigned int sizes[],
+			   struct device *alloc_devs[])
+{
+	struct bttv *btv = vb2_get_drv_priv(q);
+	unsigned int size = IMAGE_SIZE(&btv->vbi_fmt.fmt);
+
+	if (*num_planes)
+		return sizes[0] < size ? -EINVAL : 0;
+	*num_planes = 1;
+	sizes[0] = size;
+
+	return 0;
+}
+
+static void buf_queue_vbi(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct bttv *btv = vb2_get_drv_priv(vq);
+	struct bttv_buffer *buf = container_of(vbuf, struct bttv_buffer, vbuf);
+	unsigned long flags;
+
+	spin_lock_irqsave(&btv->s_lock, flags);
+	if (list_empty(&btv->vcapture)) {
+		btv->loop_irq = BT848_RISC_VBI;
+		if (vb2_is_streaming(&btv->capq))
+			btv->loop_irq |= BT848_RISC_VIDEO;
+		bttv_set_dma(btv, BT848_CAP_CTL_CAPTURE_VBI_ODD |
+			     BT848_CAP_CTL_CAPTURE_VBI_EVEN);
+	}
+	list_add_tail(&buf->list, &btv->vcapture);
+	spin_unlock_irqrestore(&btv->s_lock, flags);
+}
+
+static int buf_prepare_vbi(struct vb2_buffer *vb)
+{
+	int ret = 0;
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct bttv *btv = vb2_get_drv_priv(vq);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct bttv_buffer *buf = container_of(vbuf, struct bttv_buffer, vbuf);
+	unsigned int size = IMAGE_SIZE(&btv->vbi_fmt.fmt);
+
+	if (vb2_plane_size(vb, 0) < size)
+		return -EINVAL;
+	vb2_set_plane_payload(vb, 0, size);
+	buf->vbuf.field = V4L2_FIELD_NONE;
+	ret = bttv_buffer_risc_vbi(btv, buf);
+
+	return ret;
+}
+
+static void buf_cleanup_vbi(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct bttv_buffer *buf = container_of(vbuf, struct bttv_buffer, vbuf);
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct bttv *btv = vb2_get_drv_priv(vq);
+
+	btcx_riscmem_free(btv->c.pci, &buf->top);
+	btcx_riscmem_free(btv->c.pci, &buf->bottom);
+}
+
+static int start_streaming_vbi(struct vb2_queue *q, unsigned int count)
+{
+	int seqnr = 0;
+	struct bttv_buffer *buf;
+	struct bttv *btv = vb2_get_drv_priv(q);
+
+	btv->framedrop = 0;
+	if (!check_alloc_btres_lock(btv, RESOURCE_VBI)) {
+		if (btv->field_count)
+			seqnr++;
+		while (!list_empty(&btv->vcapture)) {
+			buf = list_entry(btv->vcapture.next,
+					 struct bttv_buffer, list);
+			list_del(&buf->list);
+			buf->vbuf.sequence = (btv->field_count >> 1) + seqnr++;
+			vb2_buffer_done(&buf->vbuf.vb2_buf,
+					VB2_BUF_STATE_QUEUED);
+		}
+		return -EBUSY;
+	}
+	if (!vb2_is_streaming(&btv->capq)) {
+		init_irqreg(btv);
+		btv->field_count = 0;
+	}
+	return 0;
+}
+
+static void stop_streaming_vbi(struct vb2_queue *q)
+{
+	struct bttv *btv = vb2_get_drv_priv(q);
+	unsigned long flags;
+
+	vb2_wait_for_all_buffers(q);
+	spin_lock_irqsave(&btv->s_lock, flags);
+	free_btres_lock(btv, RESOURCE_VBI);
+	if (!vb2_is_streaming(&btv->capq)) {
+		/* stop field counter */
+		btand(~BT848_INT_VSYNC, BT848_INT_MASK);
+	}
+	spin_unlock_irqrestore(&btv->s_lock, flags);
+}
+
+const struct vb2_ops bttv_vbi_qops = {
+	.queue_setup    = queue_setup_vbi,
+	.buf_queue      = buf_queue_vbi,
+	.buf_prepare    = buf_prepare_vbi,
+	.buf_cleanup	= buf_cleanup_vbi,
+	.start_streaming = start_streaming_vbi,
+	.stop_streaming = stop_streaming_vbi,
+	.wait_prepare   = vb2_ops_wait_prepare,
+	.wait_finish    = vb2_ops_wait_finish,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int try_fmt(struct v4l2_vbi_format *f, const struct bttv_tvnorm *tvnorm,
+			__s32 crop_start)
+{
+	__s32 min_start, max_start, max_end, f2_offset;
+	unsigned int i;
+
+	/* For compatibility with earlier driver versions we must pretend
+	   the VBI and video capture window may overlap. In reality RISC
+	   magic aborts VBI capturing at the first line of video capturing,
+	   leaving the rest of the buffer unchanged, usually all zero.
+	   VBI capturing must always start before video capturing. >> 1
+	   because cropping counts field lines times two. */
+	min_start = tvnorm->vbistart[0];
+	max_start = (crop_start >> 1) - 1;
+	max_end = (tvnorm->cropcap.bounds.top
+		   + tvnorm->cropcap.bounds.height) >> 1;
+
+	if (min_start > max_start)
+		return -EBUSY;
+
+	WARN_ON(max_start >= max_end);
+
+	f->sampling_rate    = tvnorm->Fsc;
+	f->samples_per_line = VBI_BPL;
+	f->sample_format    = V4L2_PIX_FMT_GREY;
+	f->offset           = VBI_OFFSET;
+
+	f2_offset = tvnorm->vbistart[1] - tvnorm->vbistart[0];
+
+	for (i = 0; i < 2; ++i) {
+		if (0 == f->count[i]) {
+			/* No data from this field. We leave f->start[i]
+			   alone because VIDIOCSVBIFMT is w/o and EINVALs
+			   when a driver does not support exactly the
+			   requested parameters. */
+		} else {
+			s64 start, count;
+
+			start = clamp(f->start[i], min_start, max_start);
+			/* s64 to prevent overflow. */
+			count = (s64) f->start[i] + f->count[i] - start;
+			f->start[i] = start;
+			f->count[i] = clamp(count, (s64) 1,
+					    max_end - start);
+		}
+
+		min_start += f2_offset;
+		max_start += f2_offset;
+		max_end += f2_offset;
+	}
+
+	if (0 == (f->count[0] | f->count[1])) {
+		/* As in earlier driver versions. */
+		f->start[0] = tvnorm->vbistart[0];
+		f->start[1] = tvnorm->vbistart[1];
+		f->count[0] = 1;
+		f->count[1] = 1;
+	}
+
+	f->flags = 0;
+
+	f->reserved[0] = 0;
+	f->reserved[1] = 0;
+
+	return 0;
+}
+
+int bttv_try_fmt_vbi_cap(struct file *file, void *f, struct v4l2_format *frt)
+{
+	struct bttv *btv = video_drvdata(file);
+	const struct bttv_tvnorm *tvnorm;
+	__s32 crop_start;
+
+	mutex_lock(&btv->lock);
+
+	tvnorm = &bttv_tvnorms[btv->tvnorm];
+	crop_start = btv->crop_start;
+
+	mutex_unlock(&btv->lock);
+
+	return try_fmt(&frt->fmt.vbi, tvnorm, crop_start);
+}
+
+
+int bttv_s_fmt_vbi_cap(struct file *file, void *f, struct v4l2_format *frt)
+{
+	struct bttv *btv = video_drvdata(file);
+	const struct bttv_tvnorm *tvnorm;
+	__s32 start1, end;
+	int rc;
+
+	mutex_lock(&btv->lock);
+
+	rc = -EBUSY;
+	if (btv->resources & RESOURCE_VBI)
+		goto fail;
+
+	tvnorm = &bttv_tvnorms[btv->tvnorm];
+
+	rc = try_fmt(&frt->fmt.vbi, tvnorm, btv->crop_start);
+	if (0 != rc)
+		goto fail;
+
+	start1 = frt->fmt.vbi.start[1] - tvnorm->vbistart[1] +
+		tvnorm->vbistart[0];
+
+	/* First possible line of video capturing. Should be
+	   max(f->start[0] + f->count[0], start1 + f->count[1]) * 2
+	   when capturing both fields. But for compatibility we must
+	   pretend the VBI and video capture window may overlap,
+	   so end = start + 1, the lowest possible value, times two
+	   because vbi_fmt.end counts field lines times two. */
+	end = max(frt->fmt.vbi.start[0], start1) * 2 + 2;
+
+	btv->vbi_fmt.fmt = frt->fmt.vbi;
+	btv->vbi_fmt.tvnorm = tvnorm;
+	btv->vbi_fmt.end = end;
+
+	rc = 0;
+
+ fail:
+	mutex_unlock(&btv->lock);
+
+	return rc;
+}
+
+
+int bttv_g_fmt_vbi_cap(struct file *file, void *f, struct v4l2_format *frt)
+{
+	const struct bttv_tvnorm *tvnorm;
+	struct bttv *btv = video_drvdata(file);
+
+	frt->fmt.vbi = btv->vbi_fmt.fmt;
+
+	tvnorm = &bttv_tvnorms[btv->tvnorm];
+
+	if (tvnorm != btv->vbi_fmt.tvnorm) {
+		__s32 max_end;
+		unsigned int i;
+
+		/* As in vbi_buffer_prepare() this imitates the
+		   behaviour of earlier driver versions after video
+		   standard changes, with default parameters anyway. */
+
+		max_end = (tvnorm->cropcap.bounds.top
+			   + tvnorm->cropcap.bounds.height) >> 1;
+
+		frt->fmt.vbi.sampling_rate = tvnorm->Fsc;
+
+		for (i = 0; i < 2; ++i) {
+			__s32 new_start;
+
+			new_start = frt->fmt.vbi.start[i] + tvnorm->vbistart[i]
+				- btv->vbi_fmt.tvnorm->vbistart[i];
+
+			frt->fmt.vbi.start[i] = min(new_start, max_end - 1);
+			frt->fmt.vbi.count[i] =
+				min((__s32) frt->fmt.vbi.count[i],
+					  max_end - frt->fmt.vbi.start[i]);
+
+			max_end += tvnorm->vbistart[1]
+				- tvnorm->vbistart[0];
+		}
+	}
+	return 0;
+}
+
+void bttv_vbi_fmt_reset(struct bttv_vbi_fmt *f, unsigned int norm)
+{
+	const struct bttv_tvnorm *tvnorm;
+	unsigned int real_samples_per_line;
+	unsigned int real_count;
+
+	tvnorm = &bttv_tvnorms[norm];
+
+	f->fmt.sampling_rate    = tvnorm->Fsc;
+	f->fmt.samples_per_line = VBI_BPL;
+	f->fmt.sample_format    = V4L2_PIX_FMT_GREY;
+	f->fmt.offset           = VBI_OFFSET;
+	f->fmt.start[0]		= tvnorm->vbistart[0];
+	f->fmt.start[1]		= tvnorm->vbistart[1];
+	f->fmt.count[0]		= VBI_DEFLINES;
+	f->fmt.count[1]		= VBI_DEFLINES;
+	f->fmt.flags            = 0;
+	f->fmt.reserved[0]      = 0;
+	f->fmt.reserved[1]      = 0;
+
+	/* For compatibility the buffer size must be 2 * VBI_DEFLINES *
+	   VBI_BPL regardless of the current video standard. */
+	real_samples_per_line   = 1024 + tvnorm->vbipack * 4;
+	real_count              = ((tvnorm->cropcap.defrect.top >> 1)
+				   - tvnorm->vbistart[0]);
+
+	WARN_ON(real_samples_per_line > VBI_BPL);
+	WARN_ON(real_count > VBI_DEFLINES);
+
+	f->tvnorm               = tvnorm;
+
+	/* See bttv_vbi_fmt_set(). */
+	f->end                  = tvnorm->vbistart[0] * 2 + 2;
+}