diff options
Diffstat (limited to 'drivers/media/pci/intel/ipu3')
| -rw-r--r-- | drivers/media/pci/intel/ipu3/Kconfig | 20 | ||||
| -rw-r--r-- | drivers/media/pci/intel/ipu3/Makefile | 2 | ||||
| -rw-r--r-- | drivers/media/pci/intel/ipu3/ipu3-cio2.c | 2067 | ||||
| -rw-r--r-- | drivers/media/pci/intel/ipu3/ipu3-cio2.h | 462 |
4 files changed, 2551 insertions, 0 deletions
diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig new file mode 100644 index 0000000000..c0a250daa9 --- /dev/null +++ b/drivers/media/pci/intel/ipu3/Kconfig @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0-only +config VIDEO_IPU3_CIO2 + tristate "Intel ipu3-cio2 driver" + depends on VIDEO_DEV && PCI + depends on IPU_BRIDGE || !IPU_BRIDGE + depends on ACPI || COMPILE_TEST + depends on X86 + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + select VIDEOBUF2_DMA_SG + + help + This is the Intel IPU3 CIO2 CSI-2 receiver unit, found in Intel + Skylake and Kaby Lake SoCs and used for capturing images and + video from a camera sensor. + + Say Y or M here if you have a Skylake/Kaby Lake SoC with MIPI CSI-2 + connected camera. + The module will be called ipu3-cio2. diff --git a/drivers/media/pci/intel/ipu3/Makefile b/drivers/media/pci/intel/ipu3/Makefile new file mode 100644 index 0000000000..98ddd5beaf --- /dev/null +++ b/drivers/media/pci/intel/ipu3/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_VIDEO_IPU3_CIO2) += ipu3-cio2.o diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c new file mode 100644 index 0000000000..5dd69a251b --- /dev/null +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c @@ -0,0 +1,2067 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017,2020 Intel Corporation + * + * Based partially on Intel IPU4 driver written by + * Sakari Ailus <sakari.ailus@linux.intel.com> + * Samu Onkalo <samu.onkalo@intel.com> + * Jouni Högander <jouni.hogander@intel.com> + * Jouni Ukkonen <jouni.ukkonen@intel.com> + * Antti Laakso <antti.laakso@intel.com> + * et al. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/pfn.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/vmalloc.h> + +#include <media/ipu-bridge.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-dma-sg.h> + +#include "ipu3-cio2.h" + +struct ipu3_cio2_fmt { + u32 mbus_code; + u32 fourcc; + u8 mipicode; + u8 bpp; +}; + +/* + * These are raw formats used in Intel's third generation of + * Image Processing Unit known as IPU3. + * 10bit raw bayer packed, 32 bytes for every 25 pixels, + * last LSB 6 bits unused. + */ +static const struct ipu3_cio2_fmt formats[] = { + { /* put default entry at beginning */ + .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, + .fourcc = V4L2_PIX_FMT_IPU3_SGRBG10, + .mipicode = 0x2b, + .bpp = 10, + }, { + .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, + .fourcc = V4L2_PIX_FMT_IPU3_SGBRG10, + .mipicode = 0x2b, + .bpp = 10, + }, { + .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, + .fourcc = V4L2_PIX_FMT_IPU3_SBGGR10, + .mipicode = 0x2b, + .bpp = 10, + }, { + .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, + .fourcc = V4L2_PIX_FMT_IPU3_SRGGB10, + .mipicode = 0x2b, + .bpp = 10, + }, { + .mbus_code = MEDIA_BUS_FMT_Y10_1X10, + .fourcc = V4L2_PIX_FMT_IPU3_Y10, + .mipicode = 0x2b, + .bpp = 10, + }, +}; + +/* + * cio2_find_format - lookup color format by fourcc or/and media bus code + * @pixelformat: fourcc to match, ignored if null + * @mbus_code: media bus code to match, ignored if null + */ +static const struct ipu3_cio2_fmt *cio2_find_format(const u32 *pixelformat, + const u32 *mbus_code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) { + if (pixelformat && *pixelformat != formats[i].fourcc) + continue; + if (mbus_code && *mbus_code != formats[i].mbus_code) + continue; + + return &formats[i]; + } + + return NULL; +} + +static inline u32 cio2_bytesperline(const unsigned int width) +{ + /* + * 64 bytes for every 50 pixels, the line length + * in bytes is multiple of 64 (line end alignment). + */ + return DIV_ROUND_UP(width, 50) * 64; +} + +/**************** FBPT operations ****************/ + +static void cio2_fbpt_exit_dummy(struct cio2_device *cio2) +{ + struct device *dev = &cio2->pci_dev->dev; + + if (cio2->dummy_lop) { + dma_free_coherent(dev, PAGE_SIZE, cio2->dummy_lop, + cio2->dummy_lop_bus_addr); + cio2->dummy_lop = NULL; + } + if (cio2->dummy_page) { + dma_free_coherent(dev, PAGE_SIZE, cio2->dummy_page, + cio2->dummy_page_bus_addr); + cio2->dummy_page = NULL; + } +} + +static int cio2_fbpt_init_dummy(struct cio2_device *cio2) +{ + struct device *dev = &cio2->pci_dev->dev; + unsigned int i; + + cio2->dummy_page = dma_alloc_coherent(dev, PAGE_SIZE, + &cio2->dummy_page_bus_addr, + GFP_KERNEL); + cio2->dummy_lop = dma_alloc_coherent(dev, PAGE_SIZE, + &cio2->dummy_lop_bus_addr, + GFP_KERNEL); + if (!cio2->dummy_page || !cio2->dummy_lop) { + cio2_fbpt_exit_dummy(cio2); + return -ENOMEM; + } + /* + * List of Pointers(LOP) contains 1024x32b pointers to 4KB page each + * Initialize each entry to dummy_page bus base address. + */ + for (i = 0; i < CIO2_LOP_ENTRIES; i++) + cio2->dummy_lop[i] = PFN_DOWN(cio2->dummy_page_bus_addr); + + return 0; +} + +static void cio2_fbpt_entry_enable(struct cio2_device *cio2, + struct cio2_fbpt_entry entry[CIO2_MAX_LOPS]) +{ + /* + * The CPU first initializes some fields in fbpt, then sets + * the VALID bit, this barrier is to ensure that the DMA(device) + * does not see the VALID bit enabled before other fields are + * initialized; otherwise it could lead to havoc. + */ + dma_wmb(); + + /* + * Request interrupts for start and completion + * Valid bit is applicable only to 1st entry + */ + entry[0].first_entry.ctrl = CIO2_FBPT_CTRL_VALID | + CIO2_FBPT_CTRL_IOC | CIO2_FBPT_CTRL_IOS; +} + +/* Initialize fpbt entries to point to dummy frame */ +static void cio2_fbpt_entry_init_dummy(struct cio2_device *cio2, + struct cio2_fbpt_entry + entry[CIO2_MAX_LOPS]) +{ + unsigned int i; + + entry[0].first_entry.first_page_offset = 0; + entry[1].second_entry.num_of_pages = CIO2_LOP_ENTRIES * CIO2_MAX_LOPS; + entry[1].second_entry.last_page_available_bytes = PAGE_SIZE - 1; + + for (i = 0; i < CIO2_MAX_LOPS; i++) + entry[i].lop_page_addr = PFN_DOWN(cio2->dummy_lop_bus_addr); + + cio2_fbpt_entry_enable(cio2, entry); +} + +/* Initialize fpbt entries to point to a given buffer */ +static void cio2_fbpt_entry_init_buf(struct cio2_device *cio2, + struct cio2_buffer *b, + struct cio2_fbpt_entry + entry[CIO2_MAX_LOPS]) +{ + struct vb2_buffer *vb = &b->vbb.vb2_buf; + unsigned int length = vb->planes[0].length; + int remaining, i; + + entry[0].first_entry.first_page_offset = b->offset; + remaining = length + entry[0].first_entry.first_page_offset; + entry[1].second_entry.num_of_pages = PFN_UP(remaining); + /* + * last_page_available_bytes has the offset of the last byte in the + * last page which is still accessible by DMA. DMA cannot access + * beyond this point. Valid range for this is from 0 to 4095. + * 0 indicates 1st byte in the page is DMA accessible. + * 4095 (PAGE_SIZE - 1) means every single byte in the last page + * is available for DMA transfer. + */ + remaining = offset_in_page(remaining) ?: PAGE_SIZE; + entry[1].second_entry.last_page_available_bytes = remaining - 1; + /* Fill FBPT */ + remaining = length; + i = 0; + while (remaining > 0) { + entry->lop_page_addr = PFN_DOWN(b->lop_bus_addr[i]); + remaining -= CIO2_LOP_ENTRIES * PAGE_SIZE; + entry++; + i++; + } + + /* + * The first not meaningful FBPT entry should point to a valid LOP + */ + entry->lop_page_addr = PFN_DOWN(cio2->dummy_lop_bus_addr); + + cio2_fbpt_entry_enable(cio2, entry); +} + +static int cio2_fbpt_init(struct cio2_device *cio2, struct cio2_queue *q) +{ + struct device *dev = &cio2->pci_dev->dev; + + q->fbpt = dma_alloc_coherent(dev, CIO2_FBPT_SIZE, &q->fbpt_bus_addr, + GFP_KERNEL); + if (!q->fbpt) + return -ENOMEM; + + return 0; +} + +static void cio2_fbpt_exit(struct cio2_queue *q, struct device *dev) +{ + dma_free_coherent(dev, CIO2_FBPT_SIZE, q->fbpt, q->fbpt_bus_addr); +} + +/**************** CSI2 hardware setup ****************/ + +/* + * The CSI2 receiver has several parameters affecting + * the receiver timings. These depend on the MIPI bus frequency + * F in Hz (sensor transmitter rate) as follows: + * register value = (A/1e9 + B * UI) / COUNT_ACC + * where + * UI = 1 / (2 * F) in seconds + * COUNT_ACC = counter accuracy in seconds + * For IPU3 COUNT_ACC = 0.0625 + * + * A and B are coefficients from the table below, + * depending whether the register minimum or maximum value is + * calculated. + * Minimum Maximum + * Clock lane A B A B + * reg_rx_csi_dly_cnt_termen_clane 0 0 38 0 + * reg_rx_csi_dly_cnt_settle_clane 95 -8 300 -16 + * Data lanes + * reg_rx_csi_dly_cnt_termen_dlane0 0 0 35 4 + * reg_rx_csi_dly_cnt_settle_dlane0 85 -2 145 -6 + * reg_rx_csi_dly_cnt_termen_dlane1 0 0 35 4 + * reg_rx_csi_dly_cnt_settle_dlane1 85 -2 145 -6 + * reg_rx_csi_dly_cnt_termen_dlane2 0 0 35 4 + * reg_rx_csi_dly_cnt_settle_dlane2 85 -2 145 -6 + * reg_rx_csi_dly_cnt_termen_dlane3 0 0 35 4 + * reg_rx_csi_dly_cnt_settle_dlane3 85 -2 145 -6 + * + * We use the minimum values of both A and B. + */ + +/* + * shift for keeping value range suitable for 32-bit integer arithmetic + */ +#define LIMIT_SHIFT 8 + +static s32 cio2_rx_timing(s32 a, s32 b, s64 freq, int def) +{ + const u32 accinv = 16; /* invert of counter resolution */ + const u32 uiinv = 500000000; /* 1e9 / 2 */ + s32 r; + + freq >>= LIMIT_SHIFT; + + if (WARN_ON(freq <= 0 || freq > S32_MAX)) + return def; + /* + * b could be 0, -2 or -8, so |accinv * b| is always + * less than (1 << ds) and thus |r| < 500000000. + */ + r = accinv * b * (uiinv >> LIMIT_SHIFT); + r = r / (s32)freq; + /* max value of a is 95 */ + r += accinv * a; + + return r; +}; + +/* Calculate the delay value for termination enable of clock lane HS Rx */ +static int cio2_csi2_calc_timing(struct cio2_device *cio2, struct cio2_queue *q, + struct cio2_csi2_timing *timing, + unsigned int bpp, unsigned int lanes) +{ + struct device *dev = &cio2->pci_dev->dev; + s64 freq; + + if (!q->sensor) + return -ENODEV; + + freq = v4l2_get_link_freq(q->sensor->ctrl_handler, bpp, lanes * 2); + if (freq < 0) { + dev_err(dev, "error %lld, invalid link_freq\n", freq); + return freq; + } + + timing->clk_termen = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A, + CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B, + freq, + CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT); + timing->clk_settle = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_A, + CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_B, + freq, + CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT); + timing->dat_termen = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_A, + CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_B, + freq, + CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT); + timing->dat_settle = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_A, + CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_B, + freq, + CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT); + + dev_dbg(dev, "freq ct value is %d\n", timing->clk_termen); + dev_dbg(dev, "freq cs value is %d\n", timing->clk_settle); + dev_dbg(dev, "freq dt value is %d\n", timing->dat_termen); + dev_dbg(dev, "freq ds value is %d\n", timing->dat_settle); + + return 0; +}; + +static int cio2_hw_init(struct cio2_device *cio2, struct cio2_queue *q) +{ + static const int NUM_VCS = 4; + static const int SID; /* Stream id */ + static const int ENTRY; + static const int FBPT_WIDTH = DIV_ROUND_UP(CIO2_MAX_LOPS, + CIO2_FBPT_SUBENTRY_UNIT); + const u32 num_buffers1 = CIO2_MAX_BUFFERS - 1; + const struct ipu3_cio2_fmt *fmt; + void __iomem *const base = cio2->base; + u8 lanes, csi2bus = q->csi2.port; + u8 sensor_vc = SENSOR_VIR_CH_DFLT; + struct cio2_csi2_timing timing = { 0 }; + int i, r; + + fmt = cio2_find_format(NULL, &q->subdev_fmt.code); + if (!fmt) + return -EINVAL; + + lanes = q->csi2.lanes; + + r = cio2_csi2_calc_timing(cio2, q, &timing, fmt->bpp, lanes); + if (r) + return r; + + writel(timing.clk_termen, q->csi_rx_base + + CIO2_REG_CSIRX_DLY_CNT_TERMEN(CIO2_CSIRX_DLY_CNT_CLANE_IDX)); + writel(timing.clk_settle, q->csi_rx_base + + CIO2_REG_CSIRX_DLY_CNT_SETTLE(CIO2_CSIRX_DLY_CNT_CLANE_IDX)); + + for (i = 0; i < lanes; i++) { + writel(timing.dat_termen, q->csi_rx_base + + CIO2_REG_CSIRX_DLY_CNT_TERMEN(i)); + writel(timing.dat_settle, q->csi_rx_base + + CIO2_REG_CSIRX_DLY_CNT_SETTLE(i)); + } + + writel(CIO2_PBM_WMCTRL1_MIN_2CK | + CIO2_PBM_WMCTRL1_MID1_2CK | + CIO2_PBM_WMCTRL1_MID2_2CK, base + CIO2_REG_PBM_WMCTRL1); + writel(CIO2_PBM_WMCTRL2_HWM_2CK << CIO2_PBM_WMCTRL2_HWM_2CK_SHIFT | + CIO2_PBM_WMCTRL2_LWM_2CK << CIO2_PBM_WMCTRL2_LWM_2CK_SHIFT | + CIO2_PBM_WMCTRL2_OBFFWM_2CK << + CIO2_PBM_WMCTRL2_OBFFWM_2CK_SHIFT | + CIO2_PBM_WMCTRL2_TRANSDYN << CIO2_PBM_WMCTRL2_TRANSDYN_SHIFT | + CIO2_PBM_WMCTRL2_OBFF_MEM_EN, base + CIO2_REG_PBM_WMCTRL2); + writel(CIO2_PBM_ARB_CTRL_LANES_DIV << + CIO2_PBM_ARB_CTRL_LANES_DIV_SHIFT | + CIO2_PBM_ARB_CTRL_LE_EN | + CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN << + CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN_SHIFT | + CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP << + CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP_SHIFT, + base + CIO2_REG_PBM_ARB_CTRL); + writel(CIO2_CSIRX_STATUS_DLANE_HS_MASK, + q->csi_rx_base + CIO2_REG_CSIRX_STATUS_DLANE_HS); + writel(CIO2_CSIRX_STATUS_DLANE_LP_MASK, + q->csi_rx_base + CIO2_REG_CSIRX_STATUS_DLANE_LP); + + writel(CIO2_FB_HPLL_FREQ, base + CIO2_REG_FB_HPLL_FREQ); + writel(CIO2_ISCLK_RATIO, base + CIO2_REG_ISCLK_RATIO); + + /* Configure MIPI backend */ + for (i = 0; i < NUM_VCS; i++) + writel(1, q->csi_rx_base + CIO2_REG_MIPIBE_SP_LUT_ENTRY(i)); + + /* There are 16 short packet LUT entry */ + for (i = 0; i < 16; i++) + writel(CIO2_MIPIBE_LP_LUT_ENTRY_DISREGARD, + q->csi_rx_base + CIO2_REG_MIPIBE_LP_LUT_ENTRY(i)); + writel(CIO2_MIPIBE_GLOBAL_LUT_DISREGARD, + q->csi_rx_base + CIO2_REG_MIPIBE_GLOBAL_LUT_DISREGARD); + + writel(CIO2_INT_EN_EXT_IE_MASK, base + CIO2_REG_INT_EN_EXT_IE); + writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_MASK); + writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_ENABLE); + writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_EDGE); + writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_LEVEL_NOT_PULSE); + writel(CIO2_INT_EN_EXT_OE_MASK, base + CIO2_REG_INT_EN_EXT_OE); + + writel(CIO2_REG_INT_EN_IRQ | CIO2_INT_IOC(CIO2_DMA_CHAN) | + CIO2_REG_INT_EN_IOS(CIO2_DMA_CHAN), + base + CIO2_REG_INT_EN); + + writel((CIO2_PXM_PXF_FMT_CFG_BPP_10 | CIO2_PXM_PXF_FMT_CFG_PCK_64B) + << CIO2_PXM_PXF_FMT_CFG_SID0_SHIFT, + base + CIO2_REG_PXM_PXF_FMT_CFG0(csi2bus)); + writel(SID << CIO2_MIPIBE_LP_LUT_ENTRY_SID_SHIFT | + sensor_vc << CIO2_MIPIBE_LP_LUT_ENTRY_VC_SHIFT | + fmt->mipicode << CIO2_MIPIBE_LP_LUT_ENTRY_FORMAT_TYPE_SHIFT, + q->csi_rx_base + CIO2_REG_MIPIBE_LP_LUT_ENTRY(ENTRY)); + writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_COMP_FORMAT(sensor_vc)); + writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_FORCE_RAW8); + writel(0, base + CIO2_REG_PXM_SID2BID0(csi2bus)); + + writel(lanes, q->csi_rx_base + CIO2_REG_CSIRX_NOF_ENABLED_LANES); + writel(CIO2_CGC_PRIM_TGE | + CIO2_CGC_SIDE_TGE | + CIO2_CGC_XOSC_TGE | + CIO2_CGC_D3I3_TGE | + CIO2_CGC_CSI2_INTERFRAME_TGE | + CIO2_CGC_CSI2_PORT_DCGE | + CIO2_CGC_SIDE_DCGE | + CIO2_CGC_PRIM_DCGE | + CIO2_CGC_ROSC_DCGE | + CIO2_CGC_XOSC_DCGE | + CIO2_CGC_CLKGATE_HOLDOFF << CIO2_CGC_CLKGATE_HOLDOFF_SHIFT | + CIO2_CGC_CSI_CLKGATE_HOLDOFF + << CIO2_CGC_CSI_CLKGATE_HOLDOFF_SHIFT, base + CIO2_REG_CGC); + writel(CIO2_LTRCTRL_LTRDYNEN, base + CIO2_REG_LTRCTRL); + writel(CIO2_LTRVAL0_VAL << CIO2_LTRVAL02_VAL_SHIFT | + CIO2_LTRVAL0_SCALE << CIO2_LTRVAL02_SCALE_SHIFT | + CIO2_LTRVAL1_VAL << CIO2_LTRVAL13_VAL_SHIFT | + CIO2_LTRVAL1_SCALE << CIO2_LTRVAL13_SCALE_SHIFT, + base + CIO2_REG_LTRVAL01); + writel(CIO2_LTRVAL2_VAL << CIO2_LTRVAL02_VAL_SHIFT | + CIO2_LTRVAL2_SCALE << CIO2_LTRVAL02_SCALE_SHIFT | + CIO2_LTRVAL3_VAL << CIO2_LTRVAL13_VAL_SHIFT | + CIO2_LTRVAL3_SCALE << CIO2_LTRVAL13_SCALE_SHIFT, + base + CIO2_REG_LTRVAL23); + + for (i = 0; i < CIO2_NUM_DMA_CHAN; i++) { + writel(0, base + CIO2_REG_CDMABA(i)); + writel(0, base + CIO2_REG_CDMAC0(i)); + writel(0, base + CIO2_REG_CDMAC1(i)); + } + + /* Enable DMA */ + writel(PFN_DOWN(q->fbpt_bus_addr), base + CIO2_REG_CDMABA(CIO2_DMA_CHAN)); + + writel(num_buffers1 << CIO2_CDMAC0_FBPT_LEN_SHIFT | + FBPT_WIDTH << CIO2_CDMAC0_FBPT_WIDTH_SHIFT | + CIO2_CDMAC0_DMA_INTR_ON_FE | + CIO2_CDMAC0_FBPT_UPDATE_FIFO_FULL | + CIO2_CDMAC0_DMA_EN | + CIO2_CDMAC0_DMA_INTR_ON_FS | + CIO2_CDMAC0_DMA_HALTED, base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN)); + + writel(1 << CIO2_CDMAC1_LINENUMUPDATE_SHIFT, + base + CIO2_REG_CDMAC1(CIO2_DMA_CHAN)); + + writel(0, base + CIO2_REG_PBM_FOPN_ABORT); + + writel(CIO2_PXM_FRF_CFG_CRC_TH << CIO2_PXM_FRF_CFG_CRC_TH_SHIFT | + CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NR | + CIO2_PXM_FRF_CFG_MSK_ECC_RE | + CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NE, + base + CIO2_REG_PXM_FRF_CFG(q->csi2.port)); + + /* Clear interrupts */ + writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_CLEAR); + writel(~0, base + CIO2_REG_INT_STS_EXT_OE); + writel(~0, base + CIO2_REG_INT_STS_EXT_IE); + writel(~0, base + CIO2_REG_INT_STS); + + /* Enable devices, starting from the last device in the pipe */ + writel(1, q->csi_rx_base + CIO2_REG_MIPIBE_ENABLE); + writel(1, q->csi_rx_base + CIO2_REG_CSIRX_ENABLE); + + return 0; +} + +static void cio2_hw_exit(struct cio2_device *cio2, struct cio2_queue *q) +{ + struct device *dev = &cio2->pci_dev->dev; + void __iomem *const base = cio2->base; + unsigned int i; + u32 value; + int ret; + + /* Disable CSI receiver and MIPI backend devices */ + writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_MASK); + writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_ENABLE); + writel(0, q->csi_rx_base + CIO2_REG_CSIRX_ENABLE); + writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_ENABLE); + + /* Halt DMA */ + writel(0, base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN)); + ret = readl_poll_timeout(base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN), + value, value & CIO2_CDMAC0_DMA_HALTED, + 4000, 2000000); + if (ret) + dev_err(dev, "DMA %i can not be halted\n", CIO2_DMA_CHAN); + + for (i = 0; i < CIO2_NUM_PORTS; i++) { + writel(readl(base + CIO2_REG_PXM_FRF_CFG(i)) | + CIO2_PXM_FRF_CFG_ABORT, base + CIO2_REG_PXM_FRF_CFG(i)); + writel(readl(base + CIO2_REG_PBM_FOPN_ABORT) | + CIO2_PBM_FOPN_ABORT(i), base + CIO2_REG_PBM_FOPN_ABORT); + } +} + +static void cio2_buffer_done(struct cio2_device *cio2, unsigned int dma_chan) +{ + struct device *dev = &cio2->pci_dev->dev; + struct cio2_queue *q = cio2->cur_queue; + struct cio2_fbpt_entry *entry; + u64 ns = ktime_get_ns(); + + if (dma_chan >= CIO2_QUEUES) { + dev_err(dev, "bad DMA channel %i\n", dma_chan); + return; + } + + entry = &q->fbpt[q->bufs_first * CIO2_MAX_LOPS]; + if (entry->first_entry.ctrl & CIO2_FBPT_CTRL_VALID) { + dev_warn(dev, "no ready buffers found on DMA channel %u\n", + dma_chan); + return; + } + + /* Find out which buffer(s) are ready */ + do { + struct cio2_buffer *b; + + b = q->bufs[q->bufs_first]; + if (b) { + unsigned int received = entry[1].second_entry.num_of_bytes; + unsigned long payload = + vb2_get_plane_payload(&b->vbb.vb2_buf, 0); + + q->bufs[q->bufs_first] = NULL; + atomic_dec(&q->bufs_queued); + dev_dbg(dev, "buffer %i done\n", b->vbb.vb2_buf.index); + + b->vbb.vb2_buf.timestamp = ns; + b->vbb.field = V4L2_FIELD_NONE; + b->vbb.sequence = atomic_read(&q->frame_sequence); + if (payload != received) + dev_warn(dev, + "payload length is %lu, received %u\n", + payload, received); + vb2_buffer_done(&b->vbb.vb2_buf, VB2_BUF_STATE_DONE); + } + atomic_inc(&q->frame_sequence); + cio2_fbpt_entry_init_dummy(cio2, entry); + q->bufs_first = (q->bufs_first + 1) % CIO2_MAX_BUFFERS; + entry = &q->fbpt[q->bufs_first * CIO2_MAX_LOPS]; + } while (!(entry->first_entry.ctrl & CIO2_FBPT_CTRL_VALID)); +} + +static void cio2_queue_event_sof(struct cio2_device *cio2, struct cio2_queue *q) +{ + /* + * For the user space camera control algorithms it is essential + * to know when the reception of a frame has begun. That's often + * the best timing information to get from the hardware. + */ + struct v4l2_event event = { + .type = V4L2_EVENT_FRAME_SYNC, + .u.frame_sync.frame_sequence = atomic_read(&q->frame_sequence), + }; + + v4l2_event_queue(q->subdev.devnode, &event); +} + +static const char *const cio2_irq_errs[] = { + "single packet header error corrected", + "multiple packet header errors detected", + "payload checksum (CRC) error", + "fifo overflow", + "reserved short packet data type detected", + "reserved long packet data type detected", + "incomplete long packet detected", + "frame sync error", + "line sync error", + "DPHY start of transmission error", + "DPHY synchronization error", + "escape mode error", + "escape mode trigger event", + "escape mode ultra-low power state for data lane(s)", + "escape mode ultra-low power state exit for clock lane", + "inter-frame short packet discarded", + "inter-frame long packet discarded", + "non-matching Long Packet stalled", +}; + +static void cio2_irq_log_irq_errs(struct device *dev, u8 port, u32 status) +{ + unsigned long csi2_status = status; + unsigned int i; + + for_each_set_bit(i, &csi2_status, ARRAY_SIZE(cio2_irq_errs)) + dev_err(dev, "CSI-2 receiver port %i: %s\n", + port, cio2_irq_errs[i]); + + if (fls_long(csi2_status) >= ARRAY_SIZE(cio2_irq_errs)) + dev_warn(dev, "unknown CSI2 error 0x%lx on port %i\n", + csi2_status, port); +} + +static const char *const cio2_port_errs[] = { + "ECC recoverable", + "DPHY not recoverable", + "ECC not recoverable", + "CRC error", + "INTERFRAMEDATA", + "PKT2SHORT", + "PKT2LONG", +}; + +static void cio2_irq_log_port_errs(struct device *dev, u8 port, u32 status) +{ + unsigned long port_status = status; + unsigned int i; + + for_each_set_bit(i, &port_status, ARRAY_SIZE(cio2_port_errs)) + dev_err(dev, "port %i error %s\n", port, cio2_port_errs[i]); +} + +static void cio2_irq_handle_once(struct cio2_device *cio2, u32 int_status) +{ + struct device *dev = &cio2->pci_dev->dev; + void __iomem *const base = cio2->base; + + if (int_status & CIO2_INT_IOOE) { + /* + * Interrupt on Output Error: + * 1) SRAM is full and FS received, or + * 2) An invalid bit detected by DMA. + */ + u32 oe_status, oe_clear; + + oe_clear = readl(base + CIO2_REG_INT_STS_EXT_OE); + oe_status = oe_clear; + + if (oe_status & CIO2_INT_EXT_OE_DMAOE_MASK) { + dev_err(dev, "DMA output error: 0x%x\n", + (oe_status & CIO2_INT_EXT_OE_DMAOE_MASK) + >> CIO2_INT_EXT_OE_DMAOE_SHIFT); + oe_status &= ~CIO2_INT_EXT_OE_DMAOE_MASK; + } + if (oe_status & CIO2_INT_EXT_OE_OES_MASK) { + dev_err(dev, "DMA output error on CSI2 buses: 0x%x\n", + (oe_status & CIO2_INT_EXT_OE_OES_MASK) + >> CIO2_INT_EXT_OE_OES_SHIFT); + oe_status &= ~CIO2_INT_EXT_OE_OES_MASK; + } + writel(oe_clear, base + CIO2_REG_INT_STS_EXT_OE); + if (oe_status) + dev_warn(dev, "unknown interrupt 0x%x on OE\n", + oe_status); + int_status &= ~CIO2_INT_IOOE; + } + + if (int_status & CIO2_INT_IOC_MASK) { + /* DMA IO done -- frame ready */ + u32 clr = 0; + unsigned int d; + + for (d = 0; d < CIO2_NUM_DMA_CHAN; d++) + if (int_status & CIO2_INT_IOC(d)) { + clr |= CIO2_INT_IOC(d); + cio2_buffer_done(cio2, d); + } + int_status &= ~clr; + } + + if (int_status & CIO2_INT_IOS_IOLN_MASK) { + /* DMA IO starts or reached specified line */ + u32 clr = 0; + unsigned int d; + + for (d = 0; d < CIO2_NUM_DMA_CHAN; d++) + if (int_status & CIO2_INT_IOS_IOLN(d)) { + clr |= CIO2_INT_IOS_IOLN(d); + if (d == CIO2_DMA_CHAN) + cio2_queue_event_sof(cio2, + cio2->cur_queue); + } + int_status &= ~clr; + } + + if (int_status & (CIO2_INT_IOIE | CIO2_INT_IOIRQ)) { + /* CSI2 receiver (error) interrupt */ + unsigned int port; + u32 ie_status; + + ie_status = readl(base + CIO2_REG_INT_STS_EXT_IE); + + for (port = 0; port < CIO2_NUM_PORTS; port++) { + u32 port_status = (ie_status >> (port * 8)) & 0xff; + + cio2_irq_log_port_errs(dev, port, port_status); + + if (ie_status & CIO2_INT_EXT_IE_IRQ(port)) { + void __iomem *csi_rx_base = + base + CIO2_REG_PIPE_BASE(port); + u32 csi2_status; + + csi2_status = readl(csi_rx_base + + CIO2_REG_IRQCTRL_STATUS); + + cio2_irq_log_irq_errs(dev, port, csi2_status); + + writel(csi2_status, + csi_rx_base + CIO2_REG_IRQCTRL_CLEAR); + } + } + + writel(ie_status, base + CIO2_REG_INT_STS_EXT_IE); + + int_status &= ~(CIO2_INT_IOIE | CIO2_INT_IOIRQ); + } + + if (int_status) + dev_warn(dev, "unknown interrupt 0x%x on INT\n", int_status); +} + +static irqreturn_t cio2_irq(int irq, void *cio2_ptr) +{ + struct cio2_device *cio2 = cio2_ptr; + void __iomem *const base = cio2->base; + struct device *dev = &cio2->pci_dev->dev; + u32 int_status; + + int_status = readl(base + CIO2_REG_INT_STS); + dev_dbg(dev, "isr enter - interrupt status 0x%x\n", int_status); + if (!int_status) + return IRQ_NONE; + + do { + writel(int_status, base + CIO2_REG_INT_STS); + cio2_irq_handle_once(cio2, int_status); + int_status = readl(base + CIO2_REG_INT_STS); + if (int_status) + dev_dbg(dev, "pending status 0x%x\n", int_status); + } while (int_status); + + return IRQ_HANDLED; +} + +/**************** Videobuf2 interface ****************/ + +static void cio2_vb2_return_all_buffers(struct cio2_queue *q, + enum vb2_buffer_state state) +{ + unsigned int i; + + for (i = 0; i < CIO2_MAX_BUFFERS; i++) { + if (q->bufs[i]) { + atomic_dec(&q->bufs_queued); + vb2_buffer_done(&q->bufs[i]->vbb.vb2_buf, + state); + q->bufs[i] = NULL; + } + } +} + +static int cio2_vb2_queue_setup(struct vb2_queue *vq, + unsigned int *num_buffers, + unsigned int *num_planes, + unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct cio2_device *cio2 = vb2_get_drv_priv(vq); + struct device *dev = &cio2->pci_dev->dev; + struct cio2_queue *q = vb2q_to_cio2_queue(vq); + unsigned int i; + + if (*num_planes && *num_planes < q->format.num_planes) + return -EINVAL; + + for (i = 0; i < q->format.num_planes; ++i) { + if (*num_planes && sizes[i] < q->format.plane_fmt[i].sizeimage) + return -EINVAL; + sizes[i] = q->format.plane_fmt[i].sizeimage; + alloc_devs[i] = dev; + } + + *num_planes = q->format.num_planes; + *num_buffers = clamp_val(*num_buffers, 1, CIO2_MAX_BUFFERS); + + /* Initialize buffer queue */ + for (i = 0; i < CIO2_MAX_BUFFERS; i++) { + q->bufs[i] = NULL; + cio2_fbpt_entry_init_dummy(cio2, &q->fbpt[i * CIO2_MAX_LOPS]); + } + atomic_set(&q->bufs_queued, 0); + q->bufs_first = 0; + q->bufs_next = 0; + + return 0; +} + +/* Called after each buffer is allocated */ +static int cio2_vb2_buf_init(struct vb2_buffer *vb) +{ + struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue); + struct device *dev = &cio2->pci_dev->dev; + struct cio2_buffer *b = to_cio2_buffer(vb); + unsigned int pages = PFN_UP(vb->planes[0].length); + unsigned int lops = DIV_ROUND_UP(pages + 1, CIO2_LOP_ENTRIES); + struct sg_table *sg; + struct sg_dma_page_iter sg_iter; + unsigned int i, j; + + if (lops <= 0 || lops > CIO2_MAX_LOPS) { + dev_err(dev, "%s: bad buffer size (%i)\n", __func__, + vb->planes[0].length); + return -ENOSPC; /* Should never happen */ + } + + memset(b->lop, 0, sizeof(b->lop)); + /* Allocate LOP table */ + for (i = 0; i < lops; i++) { + b->lop[i] = dma_alloc_coherent(dev, PAGE_SIZE, + &b->lop_bus_addr[i], GFP_KERNEL); + if (!b->lop[i]) + goto fail; + } + + /* Fill LOP */ + sg = vb2_dma_sg_plane_desc(vb, 0); + if (!sg) + return -ENOMEM; + + if (sg->nents && sg->sgl) + b->offset = sg->sgl->offset; + + i = j = 0; + for_each_sg_dma_page(sg->sgl, &sg_iter, sg->nents, 0) { + if (!pages--) + break; + b->lop[i][j] = PFN_DOWN(sg_page_iter_dma_address(&sg_iter)); + j++; + if (j == CIO2_LOP_ENTRIES) { + i++; + j = 0; + } + } + + b->lop[i][j] = PFN_DOWN(cio2->dummy_page_bus_addr); + return 0; +fail: + while (i--) + dma_free_coherent(dev, PAGE_SIZE, b->lop[i], b->lop_bus_addr[i]); + return -ENOMEM; +} + +/* Transfer buffer ownership to cio2 */ +static void cio2_vb2_buf_queue(struct vb2_buffer *vb) +{ + struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue); + struct device *dev = &cio2->pci_dev->dev; + struct cio2_queue *q = + container_of(vb->vb2_queue, struct cio2_queue, vbq); + struct cio2_buffer *b = to_cio2_buffer(vb); + struct cio2_fbpt_entry *entry; + unsigned long flags; + unsigned int i, j, next = q->bufs_next; + int bufs_queued = atomic_inc_return(&q->bufs_queued); + u32 fbpt_rp; + + dev_dbg(dev, "queue buffer %d\n", vb->index); + + /* + * This code queues the buffer to the CIO2 DMA engine, which starts + * running once streaming has started. It is possible that this code + * gets pre-empted due to increased CPU load. Upon this, the driver + * does not get an opportunity to queue new buffers to the CIO2 DMA + * engine. When the DMA engine encounters an FBPT entry without the + * VALID bit set, the DMA engine halts, which requires a restart of + * the DMA engine and sensor, to continue streaming. + * This is not desired and is highly unlikely given that there are + * 32 FBPT entries that the DMA engine needs to process, to run into + * an FBPT entry, without the VALID bit set. We try to mitigate this + * by disabling interrupts for the duration of this queueing. + */ + local_irq_save(flags); + + fbpt_rp = (readl(cio2->base + CIO2_REG_CDMARI(CIO2_DMA_CHAN)) + >> CIO2_CDMARI_FBPT_RP_SHIFT) + & CIO2_CDMARI_FBPT_RP_MASK; + + /* + * fbpt_rp is the fbpt entry that the dma is currently working + * on, but since it could jump to next entry at any time, + * assume that we might already be there. + */ + fbpt_rp = (fbpt_rp + 1) % CIO2_MAX_BUFFERS; + + if (bufs_queued <= 1 || fbpt_rp == next) + /* Buffers were drained */ + next = (fbpt_rp + 1) % CIO2_MAX_BUFFERS; + + for (i = 0; i < CIO2_MAX_BUFFERS; i++) { + /* + * We have allocated CIO2_MAX_BUFFERS circularly for the + * hw, the user has requested N buffer queue. The driver + * ensures N <= CIO2_MAX_BUFFERS and guarantees that whenever + * user queues a buffer, there necessarily is a free buffer. + */ + if (!q->bufs[next]) { + q->bufs[next] = b; + entry = &q->fbpt[next * CIO2_MAX_LOPS]; + cio2_fbpt_entry_init_buf(cio2, b, entry); + local_irq_restore(flags); + q->bufs_next = (next + 1) % CIO2_MAX_BUFFERS; + for (j = 0; j < vb->num_planes; j++) + vb2_set_plane_payload(vb, j, + q->format.plane_fmt[j].sizeimage); + return; + } + + dev_dbg(dev, "entry %i was full!\n", next); + next = (next + 1) % CIO2_MAX_BUFFERS; + } + + local_irq_restore(flags); + dev_err(dev, "error: all cio2 entries were full!\n"); + atomic_dec(&q->bufs_queued); + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); +} + +/* Called when each buffer is freed */ +static void cio2_vb2_buf_cleanup(struct vb2_buffer *vb) +{ + struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue); + struct device *dev = &cio2->pci_dev->dev; + struct cio2_buffer *b = to_cio2_buffer(vb); + unsigned int i; + + /* Free LOP table */ + for (i = 0; i < CIO2_MAX_LOPS; i++) { + if (b->lop[i]) + dma_free_coherent(dev, PAGE_SIZE, + b->lop[i], b->lop_bus_addr[i]); + } +} + +static int cio2_vb2_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct cio2_queue *q = vb2q_to_cio2_queue(vq); + struct cio2_device *cio2 = vb2_get_drv_priv(vq); + struct device *dev = &cio2->pci_dev->dev; + int r; + + cio2->cur_queue = q; + atomic_set(&q->frame_sequence, 0); + + r = pm_runtime_resume_and_get(dev); + if (r < 0) { + dev_info(dev, "failed to set power %d\n", r); + return r; + } + + r = video_device_pipeline_start(&q->vdev, &q->pipe); + if (r) + goto fail_pipeline; + + r = cio2_hw_init(cio2, q); + if (r) + goto fail_hw; + + /* Start streaming on sensor */ + r = v4l2_subdev_call(q->sensor, video, s_stream, 1); + if (r) + goto fail_csi2_subdev; + + cio2->streaming = true; + + return 0; + +fail_csi2_subdev: + cio2_hw_exit(cio2, q); +fail_hw: + video_device_pipeline_stop(&q->vdev); +fail_pipeline: + dev_dbg(dev, "failed to start streaming (%d)\n", r); + cio2_vb2_return_all_buffers(q, VB2_BUF_STATE_QUEUED); + pm_runtime_put(dev); + + return r; +} + +static void cio2_vb2_stop_streaming(struct vb2_queue *vq) +{ + struct cio2_queue *q = vb2q_to_cio2_queue(vq); + struct cio2_device *cio2 = vb2_get_drv_priv(vq); + struct device *dev = &cio2->pci_dev->dev; + + if (v4l2_subdev_call(q->sensor, video, s_stream, 0)) + dev_err(dev, "failed to stop sensor streaming\n"); + + cio2_hw_exit(cio2, q); + synchronize_irq(cio2->pci_dev->irq); + cio2_vb2_return_all_buffers(q, VB2_BUF_STATE_ERROR); + video_device_pipeline_stop(&q->vdev); + pm_runtime_put(dev); + cio2->streaming = false; +} + +static const struct vb2_ops cio2_vb2_ops = { + .buf_init = cio2_vb2_buf_init, + .buf_queue = cio2_vb2_buf_queue, + .buf_cleanup = cio2_vb2_buf_cleanup, + .queue_setup = cio2_vb2_queue_setup, + .start_streaming = cio2_vb2_start_streaming, + .stop_streaming = cio2_vb2_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +/**************** V4L2 interface ****************/ + +static int cio2_v4l2_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + strscpy(cap->driver, CIO2_NAME, sizeof(cap->driver)); + strscpy(cap->card, CIO2_DEVICE_NAME, sizeof(cap->card)); + + return 0; +} + +static int cio2_v4l2_enum_fmt(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + if (f->index >= ARRAY_SIZE(formats)) + return -EINVAL; + + f->pixelformat = formats[f->index].fourcc; + + return 0; +} + +/* The format is validated in cio2_video_link_validate() */ +static int cio2_v4l2_g_fmt(struct file *file, void *fh, struct v4l2_format *f) +{ + struct cio2_queue *q = file_to_cio2_queue(file); + + f->fmt.pix_mp = q->format; + + return 0; +} + +static int cio2_v4l2_try_fmt(struct file *file, void *fh, struct v4l2_format *f) +{ + const struct ipu3_cio2_fmt *fmt; + struct v4l2_pix_format_mplane *mpix = &f->fmt.pix_mp; + + fmt = cio2_find_format(&mpix->pixelformat, NULL); + if (!fmt) + fmt = &formats[0]; + + /* Only supports up to 4224x3136 */ + if (mpix->width > CIO2_IMAGE_MAX_WIDTH) + mpix->width = CIO2_IMAGE_MAX_WIDTH; + if (mpix->height > CIO2_IMAGE_MAX_HEIGHT) + mpix->height = CIO2_IMAGE_MAX_HEIGHT; + + mpix->num_planes = 1; + mpix->pixelformat = fmt->fourcc; + mpix->colorspace = V4L2_COLORSPACE_RAW; + mpix->field = V4L2_FIELD_NONE; + mpix->plane_fmt[0].bytesperline = cio2_bytesperline(mpix->width); + mpix->plane_fmt[0].sizeimage = mpix->plane_fmt[0].bytesperline * + mpix->height; + + /* use default */ + mpix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + mpix->quantization = V4L2_QUANTIZATION_DEFAULT; + mpix->xfer_func = V4L2_XFER_FUNC_DEFAULT; + + return 0; +} + +static int cio2_v4l2_s_fmt(struct file *file, void *fh, struct v4l2_format *f) +{ + struct cio2_queue *q = file_to_cio2_queue(file); + + cio2_v4l2_try_fmt(file, fh, f); + q->format = f->fmt.pix_mp; + + return 0; +} + +static int +cio2_video_enum_input(struct file *file, void *fh, struct v4l2_input *input) +{ + if (input->index > 0) + return -EINVAL; + + strscpy(input->name, "camera", sizeof(input->name)); + input->type = V4L2_INPUT_TYPE_CAMERA; + + return 0; +} + +static int +cio2_video_g_input(struct file *file, void *fh, unsigned int *input) +{ + *input = 0; + + return 0; +} + +static int +cio2_video_s_input(struct file *file, void *fh, unsigned int input) +{ + return input == 0 ? 0 : -EINVAL; +} + +static const struct v4l2_file_operations cio2_v4l2_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, +}; + +static const struct v4l2_ioctl_ops cio2_v4l2_ioctl_ops = { + .vidioc_querycap = cio2_v4l2_querycap, + .vidioc_enum_fmt_vid_cap = cio2_v4l2_enum_fmt, + .vidioc_g_fmt_vid_cap_mplane = cio2_v4l2_g_fmt, + .vidioc_s_fmt_vid_cap_mplane = cio2_v4l2_s_fmt, + .vidioc_try_fmt_vid_cap_mplane = cio2_v4l2_try_fmt, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_enum_input = cio2_video_enum_input, + .vidioc_g_input = cio2_video_g_input, + .vidioc_s_input = cio2_video_s_input, +}; + +static int cio2_subdev_subscribe_event(struct v4l2_subdev *sd, + struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + if (sub->type != V4L2_EVENT_FRAME_SYNC) + return -EINVAL; + + /* Line number. For now only zero accepted. */ + if (sub->id != 0) + return -EINVAL; + + return v4l2_event_subscribe(fh, sub, 0, NULL); +} + +static int cio2_subdev_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format; + const struct v4l2_mbus_framefmt fmt_default = { + .width = 1936, + .height = 1096, + .code = formats[0].mbus_code, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_RAW, + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, + .quantization = V4L2_QUANTIZATION_DEFAULT, + .xfer_func = V4L2_XFER_FUNC_DEFAULT, + }; + + /* Initialize try_fmt */ + format = v4l2_subdev_get_try_format(sd, fh->state, CIO2_PAD_SINK); + *format = fmt_default; + + /* same as sink */ + format = v4l2_subdev_get_try_format(sd, fh->state, CIO2_PAD_SOURCE); + *format = fmt_default; + + return 0; +} + +/* + * cio2_subdev_get_fmt - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @cfg: V4L2 subdev pad config + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int cio2_subdev_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct cio2_queue *q = container_of(sd, struct cio2_queue, subdev); + + mutex_lock(&q->subdev_lock); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) + fmt->format = *v4l2_subdev_get_try_format(sd, sd_state, + fmt->pad); + else + fmt->format = q->subdev_fmt; + + mutex_unlock(&q->subdev_lock); + + return 0; +} + +/* + * cio2_subdev_set_fmt - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @cfg: V4L2 subdev pad config + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int cio2_subdev_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct cio2_queue *q = container_of(sd, struct cio2_queue, subdev); + struct v4l2_mbus_framefmt *mbus; + u32 mbus_code = fmt->format.code; + unsigned int i; + + /* + * Only allow setting sink pad format; + * source always propagates from sink + */ + if (fmt->pad == CIO2_PAD_SOURCE) + return cio2_subdev_get_fmt(sd, sd_state, fmt); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) + mbus = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); + else + mbus = &q->subdev_fmt; + + fmt->format.code = formats[0].mbus_code; + + for (i = 0; i < ARRAY_SIZE(formats); i++) { + if (formats[i].mbus_code == mbus_code) { + fmt->format.code = mbus_code; + break; + } + } + + fmt->format.width = min(fmt->format.width, CIO2_IMAGE_MAX_WIDTH); + fmt->format.height = min(fmt->format.height, CIO2_IMAGE_MAX_HEIGHT); + fmt->format.field = V4L2_FIELD_NONE; + + mutex_lock(&q->subdev_lock); + *mbus = fmt->format; + mutex_unlock(&q->subdev_lock); + + return 0; +} + +static int cio2_subdev_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(formats)) + return -EINVAL; + + code->code = formats[code->index].mbus_code; + return 0; +} + +static int cio2_subdev_link_validate_get_format(struct media_pad *pad, + struct v4l2_subdev_format *fmt) +{ + if (is_media_entity_v4l2_subdev(pad->entity)) { + struct v4l2_subdev *sd = + media_entity_to_v4l2_subdev(pad->entity); + + memset(fmt, 0, sizeof(*fmt)); + fmt->which = V4L2_SUBDEV_FORMAT_ACTIVE; + fmt->pad = pad->index; + return v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt); + } + + return -EINVAL; +} + +static int cio2_video_link_validate(struct media_link *link) +{ + struct media_entity *entity = link->sink->entity; + struct video_device *vd = media_entity_to_video_device(entity); + struct cio2_queue *q = container_of(vd, struct cio2_queue, vdev); + struct cio2_device *cio2 = video_get_drvdata(vd); + struct device *dev = &cio2->pci_dev->dev; + struct v4l2_subdev_format source_fmt; + int ret; + + if (!media_pad_remote_pad_first(entity->pads)) { + dev_info(dev, "video node %s pad not connected\n", vd->name); + return -ENOTCONN; + } + + ret = cio2_subdev_link_validate_get_format(link->source, &source_fmt); + if (ret < 0) + return 0; + + if (source_fmt.format.width != q->format.width || + source_fmt.format.height != q->format.height) { + dev_err(dev, "Wrong width or height %ux%u (%ux%u expected)\n", + q->format.width, q->format.height, + source_fmt.format.width, source_fmt.format.height); + return -EINVAL; + } + + if (!cio2_find_format(&q->format.pixelformat, &source_fmt.format.code)) + return -EINVAL; + + return 0; +} + +static const struct v4l2_subdev_core_ops cio2_subdev_core_ops = { + .subscribe_event = cio2_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_internal_ops cio2_subdev_internal_ops = { + .open = cio2_subdev_open, +}; + +static const struct v4l2_subdev_pad_ops cio2_subdev_pad_ops = { + .link_validate = v4l2_subdev_link_validate_default, + .get_fmt = cio2_subdev_get_fmt, + .set_fmt = cio2_subdev_set_fmt, + .enum_mbus_code = cio2_subdev_enum_mbus_code, +}; + +static const struct v4l2_subdev_ops cio2_subdev_ops = { + .core = &cio2_subdev_core_ops, + .pad = &cio2_subdev_pad_ops, +}; + +/******* V4L2 sub-device asynchronous registration callbacks***********/ + +struct sensor_async_subdev { + struct v4l2_async_connection asd; + struct csi2_bus_info csi2; +}; + +#define to_sensor_asd(__asd) \ + container_of_const(__asd, struct sensor_async_subdev, asd) + +/* The .bound() notifier callback when a match is found */ +static int cio2_notifier_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_connection *asd) +{ + struct cio2_device *cio2 = to_cio2_device(notifier); + struct sensor_async_subdev *s_asd = to_sensor_asd(asd); + struct cio2_queue *q; + int ret; + + if (cio2->queue[s_asd->csi2.port].sensor) + return -EBUSY; + + ret = ipu_bridge_instantiate_vcm(sd->dev); + if (ret) + return ret; + + q = &cio2->queue[s_asd->csi2.port]; + + q->csi2 = s_asd->csi2; + q->sensor = sd; + q->csi_rx_base = cio2->base + CIO2_REG_PIPE_BASE(q->csi2.port); + + return 0; +} + +/* The .unbind callback */ +static void cio2_notifier_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_connection *asd) +{ + struct cio2_device *cio2 = to_cio2_device(notifier); + struct sensor_async_subdev *s_asd = to_sensor_asd(asd); + + cio2->queue[s_asd->csi2.port].sensor = NULL; +} + +/* .complete() is called after all subdevices have been located */ +static int cio2_notifier_complete(struct v4l2_async_notifier *notifier) +{ + struct cio2_device *cio2 = to_cio2_device(notifier); + struct device *dev = &cio2->pci_dev->dev; + struct sensor_async_subdev *s_asd; + struct v4l2_async_connection *asd; + struct cio2_queue *q; + int ret; + + list_for_each_entry(asd, &cio2->notifier.done_list, asc_entry) { + s_asd = to_sensor_asd(asd); + q = &cio2->queue[s_asd->csi2.port]; + + ret = media_entity_get_fwnode_pad(&q->sensor->entity, + s_asd->asd.match.fwnode, + MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(dev, "no pad for endpoint %pfw (%d)\n", + s_asd->asd.match.fwnode, ret); + return ret; + } + + ret = media_create_pad_link(&q->sensor->entity, ret, + &q->subdev.entity, CIO2_PAD_SINK, + 0); + if (ret) { + dev_err(dev, "failed to create link for %s (endpoint %pfw, error %d)\n", + q->sensor->name, s_asd->asd.match.fwnode, ret); + return ret; + } + } + + return v4l2_device_register_subdev_nodes(&cio2->v4l2_dev); +} + +static const struct v4l2_async_notifier_operations cio2_async_ops = { + .bound = cio2_notifier_bound, + .unbind = cio2_notifier_unbind, + .complete = cio2_notifier_complete, +}; + +static int cio2_parse_firmware(struct cio2_device *cio2) +{ + struct device *dev = &cio2->pci_dev->dev; + unsigned int i; + int ret; + + for (i = 0; i < CIO2_NUM_PORTS; i++) { + struct v4l2_fwnode_endpoint vep = { + .bus_type = V4L2_MBUS_CSI2_DPHY + }; + struct sensor_async_subdev *s_asd; + struct fwnode_handle *ep; + + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), i, 0, + FWNODE_GRAPH_ENDPOINT_NEXT); + if (!ep) + continue; + + ret = v4l2_fwnode_endpoint_parse(ep, &vep); + if (ret) + goto err_parse; + + s_asd = v4l2_async_nf_add_fwnode_remote(&cio2->notifier, ep, + struct + sensor_async_subdev); + if (IS_ERR(s_asd)) { + ret = PTR_ERR(s_asd); + goto err_parse; + } + + s_asd->csi2.port = vep.base.port; + s_asd->csi2.lanes = vep.bus.mipi_csi2.num_data_lanes; + + fwnode_handle_put(ep); + + continue; + +err_parse: + fwnode_handle_put(ep); + return ret; + } + + /* + * Proceed even without sensors connected to allow the device to + * suspend. + */ + cio2->notifier.ops = &cio2_async_ops; + ret = v4l2_async_nf_register(&cio2->notifier); + if (ret) + dev_err(dev, "failed to register async notifier : %d\n", ret); + + return ret; +} + +/**************** Queue initialization ****************/ +static const struct media_entity_operations cio2_media_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static const struct media_entity_operations cio2_video_entity_ops = { + .link_validate = cio2_video_link_validate, +}; + +static int cio2_queue_init(struct cio2_device *cio2, struct cio2_queue *q) +{ + static const u32 default_width = 1936; + static const u32 default_height = 1096; + const struct ipu3_cio2_fmt dflt_fmt = formats[0]; + struct device *dev = &cio2->pci_dev->dev; + struct video_device *vdev = &q->vdev; + struct vb2_queue *vbq = &q->vbq; + struct v4l2_subdev *subdev = &q->subdev; + struct v4l2_mbus_framefmt *fmt; + int r; + + /* Initialize miscellaneous variables */ + mutex_init(&q->lock); + mutex_init(&q->subdev_lock); + + /* Initialize formats to default values */ + fmt = &q->subdev_fmt; + fmt->width = default_width; + fmt->height = default_height; + fmt->code = dflt_fmt.mbus_code; + fmt->field = V4L2_FIELD_NONE; + + q->format.width = default_width; + q->format.height = default_height; + q->format.pixelformat = dflt_fmt.fourcc; + q->format.colorspace = V4L2_COLORSPACE_RAW; + q->format.field = V4L2_FIELD_NONE; + q->format.num_planes = 1; + q->format.plane_fmt[0].bytesperline = + cio2_bytesperline(q->format.width); + q->format.plane_fmt[0].sizeimage = q->format.plane_fmt[0].bytesperline * + q->format.height; + + /* Initialize fbpt */ + r = cio2_fbpt_init(cio2, q); + if (r) + goto fail_fbpt; + + /* Initialize media entities */ + q->subdev_pads[CIO2_PAD_SINK].flags = MEDIA_PAD_FL_SINK | + MEDIA_PAD_FL_MUST_CONNECT; + q->subdev_pads[CIO2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + subdev->entity.ops = &cio2_media_ops; + subdev->internal_ops = &cio2_subdev_internal_ops; + r = media_entity_pads_init(&subdev->entity, CIO2_PADS, q->subdev_pads); + if (r) { + dev_err(dev, "failed initialize subdev media entity (%d)\n", r); + goto fail_subdev_media_entity; + } + + q->vdev_pad.flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT; + vdev->entity.ops = &cio2_video_entity_ops; + r = media_entity_pads_init(&vdev->entity, 1, &q->vdev_pad); + if (r) { + dev_err(dev, "failed initialize videodev media entity (%d)\n", + r); + goto fail_vdev_media_entity; + } + + /* Initialize subdev */ + v4l2_subdev_init(subdev, &cio2_subdev_ops); + subdev->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; + subdev->owner = THIS_MODULE; + snprintf(subdev->name, sizeof(subdev->name), + CIO2_ENTITY_NAME " %td", q - cio2->queue); + subdev->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + v4l2_set_subdevdata(subdev, cio2); + r = v4l2_device_register_subdev(&cio2->v4l2_dev, subdev); + if (r) { + dev_err(dev, "failed initialize subdev (%d)\n", r); + goto fail_subdev; + } + + /* Initialize vbq */ + vbq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + vbq->io_modes = VB2_USERPTR | VB2_MMAP | VB2_DMABUF; + vbq->ops = &cio2_vb2_ops; + vbq->mem_ops = &vb2_dma_sg_memops; + vbq->buf_struct_size = sizeof(struct cio2_buffer); + vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + vbq->min_buffers_needed = 1; + vbq->drv_priv = cio2; + vbq->lock = &q->lock; + r = vb2_queue_init(vbq); + if (r) { + dev_err(dev, "failed to initialize videobuf2 queue (%d)\n", r); + goto fail_subdev; + } + + /* Initialize vdev */ + snprintf(vdev->name, sizeof(vdev->name), + "%s %td", CIO2_NAME, q - cio2->queue); + vdev->release = video_device_release_empty; + vdev->fops = &cio2_v4l2_fops; + vdev->ioctl_ops = &cio2_v4l2_ioctl_ops; + vdev->lock = &cio2->lock; + vdev->v4l2_dev = &cio2->v4l2_dev; + vdev->queue = &q->vbq; + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING; + video_set_drvdata(vdev, cio2); + r = video_register_device(vdev, VFL_TYPE_VIDEO, -1); + if (r) { + dev_err(dev, "failed to register video device (%d)\n", r); + goto fail_vdev; + } + + /* Create link from CIO2 subdev to output node */ + r = media_create_pad_link( + &subdev->entity, CIO2_PAD_SOURCE, &vdev->entity, 0, + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); + if (r) + goto fail_link; + + return 0; + +fail_link: + vb2_video_unregister_device(&q->vdev); +fail_vdev: + v4l2_device_unregister_subdev(subdev); +fail_subdev: + media_entity_cleanup(&vdev->entity); +fail_vdev_media_entity: + media_entity_cleanup(&subdev->entity); +fail_subdev_media_entity: + cio2_fbpt_exit(q, dev); +fail_fbpt: + mutex_destroy(&q->subdev_lock); + mutex_destroy(&q->lock); + + return r; +} + +static void cio2_queue_exit(struct cio2_device *cio2, struct cio2_queue *q) +{ + vb2_video_unregister_device(&q->vdev); + media_entity_cleanup(&q->vdev.entity); + v4l2_device_unregister_subdev(&q->subdev); + media_entity_cleanup(&q->subdev.entity); + cio2_fbpt_exit(q, &cio2->pci_dev->dev); + mutex_destroy(&q->subdev_lock); + mutex_destroy(&q->lock); +} + +static int cio2_queues_init(struct cio2_device *cio2) +{ + int i, r; + + for (i = 0; i < CIO2_QUEUES; i++) { + r = cio2_queue_init(cio2, &cio2->queue[i]); + if (r) + break; + } + + if (i == CIO2_QUEUES) + return 0; + + for (i--; i >= 0; i--) + cio2_queue_exit(cio2, &cio2->queue[i]); + + return r; +} + +static void cio2_queues_exit(struct cio2_device *cio2) +{ + unsigned int i; + + for (i = 0; i < CIO2_QUEUES; i++) + cio2_queue_exit(cio2, &cio2->queue[i]); +} + +static int cio2_check_fwnode_graph(struct fwnode_handle *fwnode) +{ + struct fwnode_handle *endpoint; + + if (IS_ERR_OR_NULL(fwnode)) + return -EINVAL; + + endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL); + if (endpoint) { + fwnode_handle_put(endpoint); + return 0; + } + + return cio2_check_fwnode_graph(fwnode->secondary); +} + +/**************** PCI interface ****************/ + +static int cio2_pci_probe(struct pci_dev *pci_dev, + const struct pci_device_id *id) +{ + struct device *dev = &pci_dev->dev; + struct fwnode_handle *fwnode = dev_fwnode(dev); + struct cio2_device *cio2; + int r; + + /* + * On some platforms no connections to sensors are defined in firmware, + * if the device has no endpoints then we can try to build those as + * software_nodes parsed from SSDB. + */ + r = cio2_check_fwnode_graph(fwnode); + if (r) { + if (fwnode && !IS_ERR_OR_NULL(fwnode->secondary)) { + dev_err(dev, "fwnode graph has no endpoints connected\n"); + return -EINVAL; + } + + r = ipu_bridge_init(dev, ipu_bridge_parse_ssdb); + if (r) + return r; + } + + cio2 = devm_kzalloc(dev, sizeof(*cio2), GFP_KERNEL); + if (!cio2) + return -ENOMEM; + cio2->pci_dev = pci_dev; + + r = pcim_enable_device(pci_dev); + if (r) { + dev_err(dev, "failed to enable device (%d)\n", r); + return r; + } + + dev_info(dev, "device 0x%x (rev: 0x%x)\n", + pci_dev->device, pci_dev->revision); + + r = pcim_iomap_regions(pci_dev, 1 << CIO2_PCI_BAR, pci_name(pci_dev)); + if (r) { + dev_err(dev, "failed to remap I/O memory (%d)\n", r); + return -ENODEV; + } + + cio2->base = pcim_iomap_table(pci_dev)[CIO2_PCI_BAR]; + + pci_set_drvdata(pci_dev, cio2); + + pci_set_master(pci_dev); + + r = dma_set_mask(&pci_dev->dev, CIO2_DMA_MASK); + if (r) { + dev_err(dev, "failed to set DMA mask (%d)\n", r); + return -ENODEV; + } + + r = pci_enable_msi(pci_dev); + if (r) { + dev_err(dev, "failed to enable MSI (%d)\n", r); + return r; + } + + r = cio2_fbpt_init_dummy(cio2); + if (r) + return r; + + mutex_init(&cio2->lock); + + cio2->media_dev.dev = dev; + strscpy(cio2->media_dev.model, CIO2_DEVICE_NAME, + sizeof(cio2->media_dev.model)); + cio2->media_dev.hw_revision = 0; + + media_device_init(&cio2->media_dev); + r = media_device_register(&cio2->media_dev); + if (r < 0) + goto fail_mutex_destroy; + + cio2->v4l2_dev.mdev = &cio2->media_dev; + r = v4l2_device_register(dev, &cio2->v4l2_dev); + if (r) { + dev_err(dev, "failed to register V4L2 device (%d)\n", r); + goto fail_media_device_unregister; + } + + r = cio2_queues_init(cio2); + if (r) + goto fail_v4l2_device_unregister; + + v4l2_async_nf_init(&cio2->notifier, &cio2->v4l2_dev); + + /* Register notifier for subdevices we care */ + r = cio2_parse_firmware(cio2); + if (r) + goto fail_clean_notifier; + + r = devm_request_irq(dev, pci_dev->irq, cio2_irq, IRQF_SHARED, + CIO2_NAME, cio2); + if (r) { + dev_err(dev, "failed to request IRQ (%d)\n", r); + goto fail_clean_notifier; + } + + pm_runtime_put_noidle(dev); + pm_runtime_allow(dev); + + return 0; + +fail_clean_notifier: + v4l2_async_nf_unregister(&cio2->notifier); + v4l2_async_nf_cleanup(&cio2->notifier); + cio2_queues_exit(cio2); +fail_v4l2_device_unregister: + v4l2_device_unregister(&cio2->v4l2_dev); +fail_media_device_unregister: + media_device_unregister(&cio2->media_dev); + media_device_cleanup(&cio2->media_dev); +fail_mutex_destroy: + mutex_destroy(&cio2->lock); + cio2_fbpt_exit_dummy(cio2); + + return r; +} + +static void cio2_pci_remove(struct pci_dev *pci_dev) +{ + struct cio2_device *cio2 = pci_get_drvdata(pci_dev); + + media_device_unregister(&cio2->media_dev); + v4l2_async_nf_unregister(&cio2->notifier); + v4l2_async_nf_cleanup(&cio2->notifier); + cio2_queues_exit(cio2); + cio2_fbpt_exit_dummy(cio2); + v4l2_device_unregister(&cio2->v4l2_dev); + media_device_cleanup(&cio2->media_dev); + mutex_destroy(&cio2->lock); + + pm_runtime_forbid(&pci_dev->dev); + pm_runtime_get_noresume(&pci_dev->dev); +} + +static int __maybe_unused cio2_runtime_suspend(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct cio2_device *cio2 = pci_get_drvdata(pci_dev); + void __iomem *const base = cio2->base; + u16 pm; + + writel(CIO2_D0I3C_I3, base + CIO2_REG_D0I3C); + dev_dbg(dev, "cio2 runtime suspend.\n"); + + pci_read_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, &pm); + pm = (pm >> CIO2_PMCSR_D0D3_SHIFT) << CIO2_PMCSR_D0D3_SHIFT; + pm |= CIO2_PMCSR_D3; + pci_write_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, pm); + + return 0; +} + +static int __maybe_unused cio2_runtime_resume(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct cio2_device *cio2 = pci_get_drvdata(pci_dev); + void __iomem *const base = cio2->base; + u16 pm; + + writel(CIO2_D0I3C_RR, base + CIO2_REG_D0I3C); + dev_dbg(dev, "cio2 runtime resume.\n"); + + pci_read_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, &pm); + pm = (pm >> CIO2_PMCSR_D0D3_SHIFT) << CIO2_PMCSR_D0D3_SHIFT; + pci_write_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, pm); + + return 0; +} + +/* + * Helper function to advance all the elements of a circular buffer by "start" + * positions + */ +static void arrange(void *ptr, size_t elem_size, size_t elems, size_t start) +{ + struct { + size_t begin, end; + } arr[2] = { + { 0, start - 1 }, + { start, elems - 1 }, + }; + +#define CHUNK_SIZE(a) ((a)->end - (a)->begin + 1) + + /* Loop as long as we have out-of-place entries */ + while (CHUNK_SIZE(&arr[0]) && CHUNK_SIZE(&arr[1])) { + size_t size0, i; + + /* + * Find the number of entries that can be arranged on this + * iteration. + */ + size0 = min(CHUNK_SIZE(&arr[0]), CHUNK_SIZE(&arr[1])); + + /* Swap the entries in two parts of the array. */ + for (i = 0; i < size0; i++) { + u8 *d = ptr + elem_size * (arr[1].begin + i); + u8 *s = ptr + elem_size * (arr[0].begin + i); + size_t j; + + for (j = 0; j < elem_size; j++) + swap(d[j], s[j]); + } + + if (CHUNK_SIZE(&arr[0]) > CHUNK_SIZE(&arr[1])) { + /* The end of the first array remains unarranged. */ + arr[0].begin += size0; + } else { + /* + * The first array is fully arranged so we proceed + * handling the next one. + */ + arr[0].begin = arr[1].begin; + arr[0].end = arr[1].begin + size0 - 1; + arr[1].begin += size0; + } + } +} + +static void cio2_fbpt_rearrange(struct cio2_device *cio2, struct cio2_queue *q) +{ + unsigned int i, j; + + for (i = 0, j = q->bufs_first; i < CIO2_MAX_BUFFERS; + i++, j = (j + 1) % CIO2_MAX_BUFFERS) + if (q->bufs[j]) + break; + + if (i == CIO2_MAX_BUFFERS) + return; + + if (j) { + arrange(q->fbpt, sizeof(struct cio2_fbpt_entry) * CIO2_MAX_LOPS, + CIO2_MAX_BUFFERS, j); + arrange(q->bufs, sizeof(struct cio2_buffer *), + CIO2_MAX_BUFFERS, j); + } + + /* + * DMA clears the valid bit when accessing the buffer. + * When stopping stream in suspend callback, some of the buffers + * may be in invalid state. After resume, when DMA meets the invalid + * buffer, it will halt and stop receiving new data. + * To avoid DMA halting, set the valid bit for all buffers in FBPT. + */ + for (i = 0; i < CIO2_MAX_BUFFERS; i++) + cio2_fbpt_entry_enable(cio2, q->fbpt + i * CIO2_MAX_LOPS); +} + +static int __maybe_unused cio2_suspend(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct cio2_device *cio2 = pci_get_drvdata(pci_dev); + struct cio2_queue *q = cio2->cur_queue; + int r; + + dev_dbg(dev, "cio2 suspend\n"); + if (!cio2->streaming) + return 0; + + /* Stop stream */ + r = v4l2_subdev_call(q->sensor, video, s_stream, 0); + if (r) { + dev_err(dev, "failed to stop sensor streaming\n"); + return r; + } + + cio2_hw_exit(cio2, q); + synchronize_irq(pci_dev->irq); + + pm_runtime_force_suspend(dev); + + /* + * Upon resume, hw starts to process the fbpt entries from beginning, + * so relocate the queued buffs to the fbpt head before suspend. + */ + cio2_fbpt_rearrange(cio2, q); + q->bufs_first = 0; + q->bufs_next = 0; + + return 0; +} + +static int __maybe_unused cio2_resume(struct device *dev) +{ + struct cio2_device *cio2 = dev_get_drvdata(dev); + struct cio2_queue *q = cio2->cur_queue; + int r; + + dev_dbg(dev, "cio2 resume\n"); + if (!cio2->streaming) + return 0; + /* Start stream */ + r = pm_runtime_force_resume(dev); + if (r < 0) { + dev_err(dev, "failed to set power %d\n", r); + return r; + } + + r = cio2_hw_init(cio2, q); + if (r) { + dev_err(dev, "fail to init cio2 hw\n"); + return r; + } + + r = v4l2_subdev_call(q->sensor, video, s_stream, 1); + if (r) { + dev_err(dev, "fail to start sensor streaming\n"); + cio2_hw_exit(cio2, q); + } + + return r; +} + +static const struct dev_pm_ops cio2_pm_ops = { + SET_RUNTIME_PM_OPS(&cio2_runtime_suspend, &cio2_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(&cio2_suspend, &cio2_resume) +}; + +static const struct pci_device_id cio2_pci_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, CIO2_PCI_ID) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, cio2_pci_id_table); + +static struct pci_driver cio2_pci_driver = { + .name = CIO2_NAME, + .id_table = cio2_pci_id_table, + .probe = cio2_pci_probe, + .remove = cio2_pci_remove, + .driver = { + .pm = &cio2_pm_ops, + }, +}; + +module_pci_driver(cio2_pci_driver); + +MODULE_AUTHOR("Tuukka Toivonen <tuukka.toivonen@intel.com>"); +MODULE_AUTHOR("Tianshu Qiu <tian.shu.qiu@intel.com>"); +MODULE_AUTHOR("Jian Xu Zheng"); +MODULE_AUTHOR("Yuning Pu <yuning.pu@intel.com>"); +MODULE_AUTHOR("Yong Zhi <yong.zhi@intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("IPU3 CIO2 driver"); +MODULE_IMPORT_NS(INTEL_IPU_BRIDGE); diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.h b/drivers/media/pci/intel/ipu3/ipu3-cio2.h new file mode 100644 index 0000000000..d731ce8adb --- /dev/null +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.h @@ -0,0 +1,462 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2017 Intel Corporation */ + +#ifndef __IPU3_CIO2_H +#define __IPU3_CIO2_H + +#include <linux/bits.h> +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/types.h> + +#include <asm/page.h> + +#include <media/media-device.h> +#include <media/media-entity.h> +#include <media/v4l2-async.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-v4l2.h> + +struct cio2_fbpt_entry; /* defined here, after the first usage */ +struct pci_dev; + +#define CIO2_NAME "ipu3-cio2" +#define CIO2_DEVICE_NAME "Intel IPU3 CIO2" +#define CIO2_ENTITY_NAME "ipu3-csi2" +#define CIO2_PCI_ID 0x9d32 +#define CIO2_PCI_BAR 0 +#define CIO2_DMA_MASK DMA_BIT_MASK(39) + +#define CIO2_IMAGE_MAX_WIDTH 4224U +#define CIO2_IMAGE_MAX_HEIGHT 3136U + +/* 32MB = 8xFBPT_entry */ +#define CIO2_MAX_LOPS 8 +#define CIO2_MAX_BUFFERS (PAGE_SIZE / 16 / CIO2_MAX_LOPS) +#define CIO2_LOP_ENTRIES (PAGE_SIZE / sizeof(u32)) + +#define CIO2_PAD_SINK 0U +#define CIO2_PAD_SOURCE 1U +#define CIO2_PADS 2U + +#define CIO2_NUM_DMA_CHAN 20U +#define CIO2_NUM_PORTS 4U /* DPHYs */ + +/* 1 for each sensor */ +#define CIO2_QUEUES CIO2_NUM_PORTS + +/* Register and bit field definitions */ +#define CIO2_REG_PIPE_BASE(n) ((n) * 0x0400) /* n = 0..3 */ +#define CIO2_REG_CSIRX_BASE 0x000 +#define CIO2_REG_MIPIBE_BASE 0x100 +#define CIO2_REG_PIXELGEN_BAS 0x200 +#define CIO2_REG_IRQCTRL_BASE 0x300 +#define CIO2_REG_GPREG_BASE 0x1000 + +/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_CSIRX_BASE */ +#define CIO2_REG_CSIRX_ENABLE (CIO2_REG_CSIRX_BASE + 0x0) +#define CIO2_REG_CSIRX_NOF_ENABLED_LANES (CIO2_REG_CSIRX_BASE + 0x4) +#define CIO2_REG_CSIRX_SP_IF_CONFIG (CIO2_REG_CSIRX_BASE + 0x10) +#define CIO2_REG_CSIRX_LP_IF_CONFIG (CIO2_REG_CSIRX_BASE + 0x14) +#define CIO2_CSIRX_IF_CONFIG_FILTEROUT 0x00 +#define CIO2_CSIRX_IF_CONFIG_FILTEROUT_VC_INACTIVE 0x01 +#define CIO2_CSIRX_IF_CONFIG_PASS 0x02 +#define CIO2_CSIRX_IF_CONFIG_FLAG_ERROR BIT(2) +#define CIO2_REG_CSIRX_STATUS (CIO2_REG_CSIRX_BASE + 0x18) +#define CIO2_REG_CSIRX_STATUS_DLANE_HS (CIO2_REG_CSIRX_BASE + 0x1c) +#define CIO2_CSIRX_STATUS_DLANE_HS_MASK 0xff +#define CIO2_REG_CSIRX_STATUS_DLANE_LP (CIO2_REG_CSIRX_BASE + 0x20) +#define CIO2_CSIRX_STATUS_DLANE_LP_MASK 0xffffff +/* Termination enable and settle in 0.0625ns units, lane=0..3 or -1 for clock */ +#define CIO2_REG_CSIRX_DLY_CNT_TERMEN(lane) \ + (CIO2_REG_CSIRX_BASE + 0x2c + 8 * (lane)) +#define CIO2_REG_CSIRX_DLY_CNT_SETTLE(lane) \ + (CIO2_REG_CSIRX_BASE + 0x30 + 8 * (lane)) +/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_MIPIBE_BASE */ +#define CIO2_REG_MIPIBE_ENABLE (CIO2_REG_MIPIBE_BASE + 0x0) +#define CIO2_REG_MIPIBE_STATUS (CIO2_REG_MIPIBE_BASE + 0x4) +#define CIO2_REG_MIPIBE_COMP_FORMAT(vc) \ + (CIO2_REG_MIPIBE_BASE + 0x8 + 0x4 * (vc)) +#define CIO2_REG_MIPIBE_FORCE_RAW8 (CIO2_REG_MIPIBE_BASE + 0x20) +#define CIO2_REG_MIPIBE_FORCE_RAW8_ENABLE BIT(0) +#define CIO2_REG_MIPIBE_FORCE_RAW8_USE_TYPEID BIT(1) +#define CIO2_REG_MIPIBE_FORCE_RAW8_TYPEID_SHIFT 2U + +#define CIO2_REG_MIPIBE_IRQ_STATUS (CIO2_REG_MIPIBE_BASE + 0x24) +#define CIO2_REG_MIPIBE_IRQ_CLEAR (CIO2_REG_MIPIBE_BASE + 0x28) +#define CIO2_REG_MIPIBE_GLOBAL_LUT_DISREGARD (CIO2_REG_MIPIBE_BASE + 0x68) +#define CIO2_MIPIBE_GLOBAL_LUT_DISREGARD 1U +#define CIO2_REG_MIPIBE_PKT_STALL_STATUS (CIO2_REG_MIPIBE_BASE + 0x6c) +#define CIO2_REG_MIPIBE_PARSE_GSP_THROUGH_LP_LUT_REG_IDX \ + (CIO2_REG_MIPIBE_BASE + 0x70) +#define CIO2_REG_MIPIBE_SP_LUT_ENTRY(vc) \ + (CIO2_REG_MIPIBE_BASE + 0x74 + 4 * (vc)) +#define CIO2_REG_MIPIBE_LP_LUT_ENTRY(m) /* m = 0..15 */ \ + (CIO2_REG_MIPIBE_BASE + 0x84 + 4 * (m)) +#define CIO2_MIPIBE_LP_LUT_ENTRY_DISREGARD 1U +#define CIO2_MIPIBE_LP_LUT_ENTRY_SID_SHIFT 1U +#define CIO2_MIPIBE_LP_LUT_ENTRY_VC_SHIFT 5U +#define CIO2_MIPIBE_LP_LUT_ENTRY_FORMAT_TYPE_SHIFT 7U + +/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_IRQCTRL_BASE */ +/* IRQ registers are 18-bit wide, see cio2_irq_error for bit definitions */ +#define CIO2_REG_IRQCTRL_EDGE (CIO2_REG_IRQCTRL_BASE + 0x00) +#define CIO2_REG_IRQCTRL_MASK (CIO2_REG_IRQCTRL_BASE + 0x04) +#define CIO2_REG_IRQCTRL_STATUS (CIO2_REG_IRQCTRL_BASE + 0x08) +#define CIO2_REG_IRQCTRL_CLEAR (CIO2_REG_IRQCTRL_BASE + 0x0c) +#define CIO2_REG_IRQCTRL_ENABLE (CIO2_REG_IRQCTRL_BASE + 0x10) +#define CIO2_REG_IRQCTRL_LEVEL_NOT_PULSE (CIO2_REG_IRQCTRL_BASE + 0x14) + +#define CIO2_REG_GPREG_SRST (CIO2_REG_GPREG_BASE + 0x0) +#define CIO2_GPREG_SRST_ALL 0xffff /* Reset all */ +#define CIO2_REG_FB_HPLL_FREQ (CIO2_REG_GPREG_BASE + 0x08) +#define CIO2_REG_ISCLK_RATIO (CIO2_REG_GPREG_BASE + 0xc) + +#define CIO2_REG_CGC 0x1400 +#define CIO2_CGC_CSI2_TGE BIT(0) +#define CIO2_CGC_PRIM_TGE BIT(1) +#define CIO2_CGC_SIDE_TGE BIT(2) +#define CIO2_CGC_XOSC_TGE BIT(3) +#define CIO2_CGC_MPLL_SHUTDOWN_EN BIT(4) +#define CIO2_CGC_D3I3_TGE BIT(5) +#define CIO2_CGC_CSI2_INTERFRAME_TGE BIT(6) +#define CIO2_CGC_CSI2_PORT_DCGE BIT(8) +#define CIO2_CGC_CSI2_DCGE BIT(9) +#define CIO2_CGC_SIDE_DCGE BIT(10) +#define CIO2_CGC_PRIM_DCGE BIT(11) +#define CIO2_CGC_ROSC_DCGE BIT(12) +#define CIO2_CGC_XOSC_DCGE BIT(13) +#define CIO2_CGC_FLIS_DCGE BIT(14) +#define CIO2_CGC_CLKGATE_HOLDOFF_SHIFT 20U +#define CIO2_CGC_CSI_CLKGATE_HOLDOFF_SHIFT 24U +#define CIO2_REG_D0I3C 0x1408 +#define CIO2_D0I3C_I3 BIT(2) /* Set D0I3 */ +#define CIO2_D0I3C_RR BIT(3) /* Restore? */ +#define CIO2_REG_SWRESET 0x140c +#define CIO2_SWRESET_SWRESET 1U +#define CIO2_REG_SENSOR_ACTIVE 0x1410 +#define CIO2_REG_INT_STS 0x1414 +#define CIO2_REG_INT_STS_EXT_OE 0x1418 +#define CIO2_INT_EXT_OE_DMAOE_SHIFT 0U +#define CIO2_INT_EXT_OE_DMAOE_MASK 0x7ffff +#define CIO2_INT_EXT_OE_OES_SHIFT 24U +#define CIO2_INT_EXT_OE_OES_MASK (0xf << CIO2_INT_EXT_OE_OES_SHIFT) +#define CIO2_REG_INT_EN 0x1420 +#define CIO2_REG_INT_EN_IRQ (1 << 24) +#define CIO2_REG_INT_EN_IOS(dma) (1U << (((dma) >> 1U) + 12U)) +/* + * Interrupt on completion bit, Eg. DMA 0-3 maps to bit 0-3, + * DMA4 & DMA5 map to bit 4 ... DMA18 & DMA19 map to bit 11 Et cetera + */ +#define CIO2_INT_IOC(dma) (1U << ((dma) < 4U ? (dma) : ((dma) >> 1U) + 2U)) +#define CIO2_INT_IOC_SHIFT 0 +#define CIO2_INT_IOC_MASK (0x7ff << CIO2_INT_IOC_SHIFT) +#define CIO2_INT_IOS_IOLN(dma) (1U << (((dma) >> 1U) + 12U)) +#define CIO2_INT_IOS_IOLN_SHIFT 12 +#define CIO2_INT_IOS_IOLN_MASK (0x3ff << CIO2_INT_IOS_IOLN_SHIFT) +#define CIO2_INT_IOIE BIT(22) +#define CIO2_INT_IOOE BIT(23) +#define CIO2_INT_IOIRQ BIT(24) +#define CIO2_REG_INT_EN_EXT_OE 0x1424 +#define CIO2_REG_DMA_DBG 0x1448 +#define CIO2_REG_DMA_DBG_DMA_INDEX_SHIFT 0U +#define CIO2_REG_PBM_ARB_CTRL 0x1460 +#define CIO2_PBM_ARB_CTRL_LANES_DIV 0U /* 4-4-2-2 lanes */ +#define CIO2_PBM_ARB_CTRL_LANES_DIV_SHIFT 0U +#define CIO2_PBM_ARB_CTRL_LE_EN BIT(7) +#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN 2U +#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN_SHIFT 8U +#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP 480U +#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP_SHIFT 16U +#define CIO2_REG_PBM_WMCTRL1 0x1464 +#define CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT 0U +#define CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT 8U +#define CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT 16U +#define CIO2_PBM_WMCTRL1_TS_COUNT_DISABLE BIT(31) +#define CIO2_PBM_WMCTRL1_MIN_2CK (4 << CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT) +#define CIO2_PBM_WMCTRL1_MID1_2CK (16 << CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT) +#define CIO2_PBM_WMCTRL1_MID2_2CK (21 << CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT) +#define CIO2_REG_PBM_WMCTRL2 0x1468 +#define CIO2_PBM_WMCTRL2_HWM_2CK 40U +#define CIO2_PBM_WMCTRL2_HWM_2CK_SHIFT 0U +#define CIO2_PBM_WMCTRL2_LWM_2CK 22U +#define CIO2_PBM_WMCTRL2_LWM_2CK_SHIFT 8U +#define CIO2_PBM_WMCTRL2_OBFFWM_2CK 2U +#define CIO2_PBM_WMCTRL2_OBFFWM_2CK_SHIFT 16U +#define CIO2_PBM_WMCTRL2_TRANSDYN 1U +#define CIO2_PBM_WMCTRL2_TRANSDYN_SHIFT 24U +#define CIO2_PBM_WMCTRL2_DYNWMEN BIT(28) +#define CIO2_PBM_WMCTRL2_OBFF_MEM_EN BIT(29) +#define CIO2_PBM_WMCTRL2_OBFF_CPU_EN BIT(30) +#define CIO2_PBM_WMCTRL2_DRAINNOW BIT(31) +#define CIO2_REG_PBM_TS_COUNT 0x146c +#define CIO2_REG_PBM_FOPN_ABORT 0x1474 +/* below n = 0..3 */ +#define CIO2_PBM_FOPN_ABORT(n) (0x1 << 8U * (n)) +#define CIO2_PBM_FOPN_FORCE_ABORT(n) (0x2 << 8U * (n)) +#define CIO2_PBM_FOPN_FRAMEOPEN(n) (0x8 << 8U * (n)) +#define CIO2_REG_LTRCTRL 0x1480 +#define CIO2_LTRCTRL_LTRDYNEN BIT(16) +#define CIO2_LTRCTRL_LTRSTABLETIME_SHIFT 8U +#define CIO2_LTRCTRL_LTRSTABLETIME_MASK 0xff +#define CIO2_LTRCTRL_LTRSEL1S3 BIT(7) +#define CIO2_LTRCTRL_LTRSEL1S2 BIT(6) +#define CIO2_LTRCTRL_LTRSEL1S1 BIT(5) +#define CIO2_LTRCTRL_LTRSEL1S0 BIT(4) +#define CIO2_LTRCTRL_LTRSEL2S3 BIT(3) +#define CIO2_LTRCTRL_LTRSEL2S2 BIT(2) +#define CIO2_LTRCTRL_LTRSEL2S1 BIT(1) +#define CIO2_LTRCTRL_LTRSEL2S0 BIT(0) +#define CIO2_REG_LTRVAL23 0x1484 +#define CIO2_REG_LTRVAL01 0x1488 +#define CIO2_LTRVAL02_VAL_SHIFT 0U +#define CIO2_LTRVAL02_SCALE_SHIFT 10U +#define CIO2_LTRVAL13_VAL_SHIFT 16U +#define CIO2_LTRVAL13_SCALE_SHIFT 26U + +#define CIO2_LTRVAL0_VAL 175U +/* Value times 1024 ns */ +#define CIO2_LTRVAL0_SCALE 2U +#define CIO2_LTRVAL1_VAL 90U +#define CIO2_LTRVAL1_SCALE 2U +#define CIO2_LTRVAL2_VAL 90U +#define CIO2_LTRVAL2_SCALE 2U +#define CIO2_LTRVAL3_VAL 90U +#define CIO2_LTRVAL3_SCALE 2U + +#define CIO2_REG_CDMABA(n) (0x1500 + 0x10 * (n)) /* n = 0..19 */ +#define CIO2_REG_CDMARI(n) (0x1504 + 0x10 * (n)) +#define CIO2_CDMARI_FBPT_RP_SHIFT 0U +#define CIO2_CDMARI_FBPT_RP_MASK 0xff +#define CIO2_REG_CDMAC0(n) (0x1508 + 0x10 * (n)) +#define CIO2_CDMAC0_FBPT_LEN_SHIFT 0U +#define CIO2_CDMAC0_FBPT_WIDTH_SHIFT 8U +#define CIO2_CDMAC0_FBPT_NS BIT(25) +#define CIO2_CDMAC0_DMA_INTR_ON_FS BIT(26) +#define CIO2_CDMAC0_DMA_INTR_ON_FE BIT(27) +#define CIO2_CDMAC0_FBPT_UPDATE_FIFO_FULL BIT(28) +#define CIO2_CDMAC0_FBPT_FIFO_FULL_FIX_DIS BIT(29) +#define CIO2_CDMAC0_DMA_EN BIT(30) +#define CIO2_CDMAC0_DMA_HALTED BIT(31) +#define CIO2_REG_CDMAC1(n) (0x150c + 0x10 * (n)) +#define CIO2_CDMAC1_LINENUMINT_SHIFT 0U +#define CIO2_CDMAC1_LINENUMUPDATE_SHIFT 16U +/* n = 0..3 */ +#define CIO2_REG_PXM_PXF_FMT_CFG0(n) (0x1700 + 0x30 * (n)) +#define CIO2_PXM_PXF_FMT_CFG_SID0_SHIFT 0U +#define CIO2_PXM_PXF_FMT_CFG_SID1_SHIFT 16U +#define CIO2_PXM_PXF_FMT_CFG_PCK_64B (0 << 0) +#define CIO2_PXM_PXF_FMT_CFG_PCK_32B (1 << 0) +#define CIO2_PXM_PXF_FMT_CFG_BPP_08 (0 << 2) +#define CIO2_PXM_PXF_FMT_CFG_BPP_10 (1 << 2) +#define CIO2_PXM_PXF_FMT_CFG_BPP_12 (2 << 2) +#define CIO2_PXM_PXF_FMT_CFG_BPP_14 (3 << 2) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_4PPC (0 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_RGBA (1 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_ARGB (2 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR2 (3 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR3 (4 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_NV16 (5 << 4) +#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_AB (1 << 7) +#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_CD (1 << 8) +#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_AC (1 << 9) +#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_BD (1 << 10) +#define CIO2_REG_INT_STS_EXT_IE 0x17e4 +#define CIO2_REG_INT_EN_EXT_IE 0x17e8 +#define CIO2_INT_EXT_IE_ECC_RE(n) (0x01 << (8U * (n))) +#define CIO2_INT_EXT_IE_DPHY_NR(n) (0x02 << (8U * (n))) +#define CIO2_INT_EXT_IE_ECC_NR(n) (0x04 << (8U * (n))) +#define CIO2_INT_EXT_IE_CRCERR(n) (0x08 << (8U * (n))) +#define CIO2_INT_EXT_IE_INTERFRAMEDATA(n) (0x10 << (8U * (n))) +#define CIO2_INT_EXT_IE_PKT2SHORT(n) (0x20 << (8U * (n))) +#define CIO2_INT_EXT_IE_PKT2LONG(n) (0x40 << (8U * (n))) +#define CIO2_INT_EXT_IE_IRQ(n) (0x80 << (8U * (n))) +#define CIO2_REG_PXM_FRF_CFG(n) (0x1720 + 0x30 * (n)) +#define CIO2_PXM_FRF_CFG_FNSEL BIT(0) +#define CIO2_PXM_FRF_CFG_FN_RST BIT(1) +#define CIO2_PXM_FRF_CFG_ABORT BIT(2) +#define CIO2_PXM_FRF_CFG_CRC_TH_SHIFT 3U +#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NR BIT(8) +#define CIO2_PXM_FRF_CFG_MSK_ECC_RE BIT(9) +#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NE BIT(10) +#define CIO2_PXM_FRF_CFG_EVEN_ODD_MODE_SHIFT 11U +#define CIO2_PXM_FRF_CFG_MASK_CRC_THRES BIT(13) +#define CIO2_PXM_FRF_CFG_MASK_CSI_ACCEPT BIT(14) +#define CIO2_PXM_FRF_CFG_CIOHC_FS_MODE BIT(15) +#define CIO2_PXM_FRF_CFG_CIOHC_FRST_FRM_SHIFT 16U +#define CIO2_REG_PXM_SID2BID0(n) (0x1724 + 0x30 * (n)) +#define CIO2_FB_HPLL_FREQ 0x2 +#define CIO2_ISCLK_RATIO 0xc + +#define CIO2_IRQCTRL_MASK 0x3ffff + +#define CIO2_INT_EN_EXT_OE_MASK 0x8f0fffff + +#define CIO2_CGC_CLKGATE_HOLDOFF 3U +#define CIO2_CGC_CSI_CLKGATE_HOLDOFF 5U + +#define CIO2_PXM_FRF_CFG_CRC_TH 16 + +#define CIO2_INT_EN_EXT_IE_MASK 0xffffffff + +#define CIO2_DMA_CHAN 0U + +#define CIO2_CSIRX_DLY_CNT_CLANE_IDX -1 + +#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A 0 +#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B 0 +#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_A 95 +#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_B -8 + +#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_A 0 +#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_B 0 +#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_A 85 +#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_B -2 + +#define CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT 0x4 +#define CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT 0x570 + +#define CIO2_PMCSR_OFFSET 4U +#define CIO2_PMCSR_D0D3_SHIFT 2U +#define CIO2_PMCSR_D3 0x3 + +struct cio2_csi2_timing { + s32 clk_termen; + s32 clk_settle; + s32 dat_termen; + s32 dat_settle; +}; + +struct cio2_buffer { + struct vb2_v4l2_buffer vbb; + u32 *lop[CIO2_MAX_LOPS]; + dma_addr_t lop_bus_addr[CIO2_MAX_LOPS]; + unsigned int offset; +}; + +#define to_cio2_buffer(vb) container_of(vb, struct cio2_buffer, vbb.vb2_buf) + +struct csi2_bus_info { + u32 port; + u32 lanes; +}; + +struct cio2_queue { + /* mutex to be used by vb2_queue */ + struct mutex lock; + struct media_pipeline pipe; + struct csi2_bus_info csi2; + struct v4l2_subdev *sensor; + void __iomem *csi_rx_base; + + /* Subdev, /dev/v4l-subdevX */ + struct v4l2_subdev subdev; + struct mutex subdev_lock; /* Serialise acces to subdev_fmt field */ + struct media_pad subdev_pads[CIO2_PADS]; + struct v4l2_mbus_framefmt subdev_fmt; + atomic_t frame_sequence; + + /* Video device, /dev/videoX */ + struct video_device vdev; + struct media_pad vdev_pad; + struct v4l2_pix_format_mplane format; + struct vb2_queue vbq; + + /* Buffer queue handling */ + struct cio2_fbpt_entry *fbpt; /* Frame buffer pointer table */ + dma_addr_t fbpt_bus_addr; + struct cio2_buffer *bufs[CIO2_MAX_BUFFERS]; + unsigned int bufs_first; /* Index of the first used entry */ + unsigned int bufs_next; /* Index of the first unused entry */ + atomic_t bufs_queued; +}; + +struct cio2_device { + struct pci_dev *pci_dev; + void __iomem *base; + struct v4l2_device v4l2_dev; + struct cio2_queue queue[CIO2_QUEUES]; + struct cio2_queue *cur_queue; + /* mutex to be used by video_device */ + struct mutex lock; + + bool streaming; + struct v4l2_async_notifier notifier; + struct media_device media_dev; + + /* + * Safety net to catch DMA fetch ahead + * when reaching the end of LOP + */ + void *dummy_page; + /* DMA handle of dummy_page */ + dma_addr_t dummy_page_bus_addr; + /* single List of Pointers (LOP) page */ + u32 *dummy_lop; + /* DMA handle of dummy_lop */ + dma_addr_t dummy_lop_bus_addr; +}; + +#define to_cio2_device(n) container_of(n, struct cio2_device, notifier) + +/**************** Virtual channel ****************/ +/* + * This should come from sensor driver. No + * driver interface nor requirement yet. + */ +#define SENSOR_VIR_CH_DFLT 0 + +/**************** FBPT operations ****************/ +#define CIO2_FBPT_SIZE (CIO2_MAX_BUFFERS * CIO2_MAX_LOPS * \ + sizeof(struct cio2_fbpt_entry)) + +#define CIO2_FBPT_SUBENTRY_UNIT 4 + +/* cio2 fbpt first_entry ctrl status */ +#define CIO2_FBPT_CTRL_VALID BIT(0) +#define CIO2_FBPT_CTRL_IOC BIT(1) +#define CIO2_FBPT_CTRL_IOS BIT(2) +#define CIO2_FBPT_CTRL_SUCCXFAIL BIT(3) +#define CIO2_FBPT_CTRL_CMPLCODE_SHIFT 4 + +/* + * Frame Buffer Pointer Table(FBPT) entry + * each entry describe an output buffer and consists of + * several sub-entries + */ +struct __packed cio2_fbpt_entry { + union { + struct __packed { + u32 ctrl; /* status ctrl */ + u16 cur_line_num; /* current line # written to DDR */ + u16 frame_num; /* updated by DMA upon FE */ + u32 first_page_offset; /* offset for 1st page in LOP */ + } first_entry; + /* Second entry per buffer */ + struct __packed { + u32 timestamp; + u32 num_of_bytes; + /* the number of bytes for write on last page */ + u16 last_page_available_bytes; + /* the number of pages allocated for this buf */ + u16 num_of_pages; + } second_entry; + }; + u32 lop_page_addr; /* Points to list of pointers (LOP) table */ +}; + +static inline struct cio2_queue *file_to_cio2_queue(struct file *file) +{ + return container_of(video_devdata(file), struct cio2_queue, vdev); +} + +static inline struct cio2_queue *vb2q_to_cio2_queue(struct vb2_queue *vq) +{ + return container_of(vq, struct cio2_queue, vbq); +} + +#endif |