diff options
Diffstat (limited to 'drivers/media/pci/ttpci')
| -rw-r--r-- | drivers/media/pci/ttpci/Kconfig | 86 | ||||
| -rw-r--r-- | drivers/media/pci/ttpci/Makefile | 13 | ||||
| -rw-r--r-- | drivers/media/pci/ttpci/budget-av.c | 1623 | ||||
| -rw-r--r-- | drivers/media/pci/ttpci/budget-ci.c | 1574 | ||||
| -rw-r--r-- | drivers/media/pci/ttpci/budget-core.c | 603 | ||||
| -rw-r--r-- | drivers/media/pci/ttpci/budget.c | 883 | ||||
| -rw-r--r-- | drivers/media/pci/ttpci/budget.h | 129 |
7 files changed, 4911 insertions, 0 deletions
diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig new file mode 100644 index 0000000000..65a6832a6b --- /dev/null +++ b/drivers/media/pci/ttpci/Kconfig @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only +config DVB_BUDGET_CORE + tristate "SAA7146 DVB cards (aka Budget, Nova-PCI)" + depends on DVB_CORE && PCI && I2C + select VIDEO_SAA7146 + select TTPCI_EEPROM + help + Support for simple SAA7146 based DVB cards + (so called Budget- or Nova-PCI cards) without onboard + MPEG2 decoder. + +config DVB_BUDGET + tristate "Budget cards" + depends on DVB_BUDGET_CORE && I2C + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT + select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT + select DVB_L64781 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT + help + Support for simple SAA7146 based DVB cards (so called Budget- + or Nova-PCI cards) without onboard MPEG2 decoder, and without + analog inputs or an onboard Common Interface connector. + + Say Y if you own such a card and want to use it. + + To compile this driver as a module, choose M here: the + module will be called budget. + +config DVB_BUDGET_CI + tristate "Budget cards with onboard CI connector" + depends on DVB_BUDGET_CORE && I2C + select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT + depends on RC_CORE + help + Support for simple SAA7146 based DVB cards + (so called Budget- or Nova-PCI cards) without onboard + MPEG2 decoder, but with onboard Common Interface connector. + + Note: The Common Interface is not yet supported by this driver + due to lack of information from the vendor. + + Say Y if you own such a card and want to use it. + + To compile this driver as a module, choose M here: the + module will be called budget-ci. + +config DVB_BUDGET_AV + tristate "Budget cards with analog video inputs" + depends on DVB_BUDGET_CORE && I2C + select VIDEO_SAA7146_VV + depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10021 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA8261 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUA6100 if MEDIA_SUBDRV_AUTOSELECT + help + Support for simple SAA7146 based DVB cards + (so called Budget- or Nova-PCI cards) without onboard + MPEG2 decoder, but with one or more analog video inputs. + + Say Y if you own such a card and want to use it. + + To compile this driver as a module, choose M here: the + module will be called budget-av. diff --git a/drivers/media/pci/ttpci/Makefile b/drivers/media/pci/ttpci/Makefile new file mode 100644 index 0000000000..b0708f6e40 --- /dev/null +++ b/drivers/media/pci/ttpci/Makefile @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the kernel SAA7146 FULL TS DVB device driver +# + +obj-$(CONFIG_DVB_BUDGET_CORE) += budget-core.o +obj-$(CONFIG_DVB_BUDGET) += budget.o +obj-$(CONFIG_DVB_BUDGET_AV) += budget-av.o +obj-$(CONFIG_DVB_BUDGET_CI) += budget-ci.o + +ccflags-y += -I $(srctree)/drivers/media/dvb-frontends/ +ccflags-y += -I $(srctree)/drivers/media/tuners +ccflags-y += -I $(srctree)/drivers/media/common diff --git a/drivers/media/pci/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c new file mode 100644 index 0000000000..230b104a7c --- /dev/null +++ b/drivers/media/pci/ttpci/budget-av.c @@ -0,0 +1,1623 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * budget-av.c: driver for the SAA7146 based Budget DVB cards + * with analog video in + * + * Compiled from various sources by Michael Hunold <michael@mihu.de> + * + * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> & + * Andrew de Quincey <adq_dvb@lidskialf.net> + * + * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de> + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * the project's page is at https://linuxtv.org + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "budget.h" +#include "stv0299.h" +#include "stb0899_drv.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" +#include "tda8261.h" +#include "tda8261_cfg.h" +#include "tda1002x.h" +#include "tda1004x.h" +#include "tua6100.h" +#include "dvb-pll.h" +#include <media/drv-intf/saa7146_vv.h> +#include <linux/module.h> +#include <linux/etherdevice.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/spinlock.h> + +#include <media/dvb_ca_en50221.h> + +#define DEBICICAM 0x02420000 + +#define SLOTSTATUS_NONE 1 +#define SLOTSTATUS_PRESENT 2 +#define SLOTSTATUS_RESET 4 +#define SLOTSTATUS_READY 8 +#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct budget_av { + struct budget budget; + struct video_device vd; + int cur_input; + int has_saa7113; + struct tasklet_struct ciintf_irq_tasklet; + int slot_status; + struct dvb_ca_en50221 ca; + u8 reinitialise_demod:1; +}; + +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot); + + +/* GPIO Connections: + * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*! + * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory + * 2 - CI Card Enable (Active Low) + * 3 - CI Card Detect + */ + +/**************************************************************************** + * INITIALIZATION + ****************************************************************************/ + +static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg) +{ + u8 mm1[] = { 0x00 }; + u8 mm2[] = { 0x00 }; + struct i2c_msg msgs[2]; + + msgs[0].flags = 0; + msgs[1].flags = I2C_M_RD; + msgs[0].addr = msgs[1].addr = id / 2; + mm1[0] = reg; + msgs[0].len = 1; + msgs[1].len = 1; + msgs[0].buf = mm1; + msgs[1].buf = mm2; + + i2c_transfer(i2c, msgs, 2); + + return mm2[0]; +} + +static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len) +{ + u8 mm1[] = { reg }; + struct i2c_msg msgs[2] = { + {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1}, + {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len} + }; + + if (i2c_transfer(i2c, msgs, 2) != 2) + return -EIO; + + return 0; +} + +static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val) +{ + u8 msg[2] = { reg, val }; + struct i2c_msg msgs; + + msgs.flags = 0; + msgs.addr = id / 2; + msgs.len = 2; + msgs.buf = msg; + return i2c_transfer(i2c, &msgs, 1); +} + +static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) +{ + struct budget_av *budget_av = ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); + udelay(1); + + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 1\n"); + } + return result; +} + +static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) +{ + struct budget_av *budget_av = ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); + udelay(1); + + result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 2\n"); + } + return result; +} + +static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) +{ + struct budget_av *budget_av = ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + udelay(1); + + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 3\n"); + return -ETIMEDOUT; + } + return result; +} + +static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) +{ + struct budget_av *budget_av = ca->data; + int result; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + udelay(1); + + result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0); + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 5\n"); + } + return result; +} + +static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_av *budget_av = ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + + if (slot != 0) + return -EINVAL; + + dprintk(1, "ciintf_slot_reset\n"); + budget_av->slot_status = SLOTSTATUS_RESET; + + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ + + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ + msleep(2); + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */ + msleep(20); /* 20 ms Vcc settling time */ + + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */ + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + msleep(20); + + /* reinitialise the frontend if necessary */ + if (budget_av->reinitialise_demod) + dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); + + return 0; +} + +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_av *budget_av = ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + + if (slot != 0) + return -EINVAL; + + dprintk(1, "ciintf_slot_shutdown\n"); + + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + budget_av->slot_status = SLOTSTATUS_NONE; + + return 0; +} + +static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_av *budget_av = ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + + if (slot != 0) + return -EINVAL; + + dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status); + + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); + + return 0; +} + +static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct budget_av *budget_av = ca->data; + struct saa7146_dev *saa = budget_av->budget.dev; + int result; + + if (slot != 0) + return -EINVAL; + + /* test the card detect line - needs to be done carefully + * since it never goes high for some CAMs on this interface (e.g. topuptv) */ + if (budget_av->slot_status == SLOTSTATUS_NONE) { + saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); + udelay(1); + if (saa7146_read(saa, PSR) & MASK_06) { + if (budget_av->slot_status == SLOTSTATUS_NONE) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + pr_info("cam inserted A\n"); + } + } + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + } + + /* We also try and read from IO memory to work round the above detection bug. If + * there is no CAM, we will get a timeout. Only done if there is no cam + * present, since this test actually breaks some cams :( + * + * if the CI interface is not open, we also do the above test since we + * don't care if the cam has problems - we'll be resetting it on open() anyway */ + if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) { + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1); + if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + pr_info("cam inserted B\n"); + } else if (result < 0) { + if (budget_av->slot_status != SLOTSTATUS_NONE) { + ciintf_slot_shutdown(ca, slot); + pr_info("cam ejected 5\n"); + return 0; + } + } + } + + /* read from attribute memory in reset/ready state to know when the CAM is ready */ + if (budget_av->slot_status == SLOTSTATUS_RESET) { + result = ciintf_read_attribute_mem(ca, slot, 0); + if (result == 0x1d) { + budget_av->slot_status = SLOTSTATUS_READY; + } + } + + /* work out correct return code */ + if (budget_av->slot_status != SLOTSTATUS_NONE) { + if (budget_av->slot_status & SLOTSTATUS_READY) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } + return DVB_CA_EN50221_POLL_CAM_PRESENT; + } + return 0; +} + +static int ciintf_init(struct budget_av *budget_av) +{ + struct saa7146_dev *saa = budget_av->budget.dev; + int result; + + memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221)); + + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + + /* Enable DEBI pins */ + saa7146_write(saa, MC1, MASK_27 | MASK_11); + + /* register CI interface */ + budget_av->ca.owner = THIS_MODULE; + budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem; + budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem; + budget_av->ca.read_cam_control = ciintf_read_cam_control; + budget_av->ca.write_cam_control = ciintf_write_cam_control; + budget_av->ca.slot_reset = ciintf_slot_reset; + budget_av->ca.slot_shutdown = ciintf_slot_shutdown; + budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable; + budget_av->ca.poll_slot_status = ciintf_poll_slot_status; + budget_av->ca.data = budget_av; + budget_av->budget.ci_present = 1; + budget_av->slot_status = SLOTSTATUS_NONE; + + if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter, + &budget_av->ca, 0, 1)) != 0) { + pr_err("ci initialisation failed\n"); + goto error; + } + + pr_info("ci interface initialised\n"); + return 0; + +error: + saa7146_write(saa, MC1, MASK_27); + return result; +} + +static void ciintf_deinit(struct budget_av *budget_av) +{ + struct saa7146_dev *saa = budget_av->budget.dev; + + saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); + saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); + saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); + saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); + + /* release the CA device */ + dvb_ca_en50221_release(&budget_av->ca); + + /* disable DEBI pins */ + saa7146_write(saa, MC1, MASK_27); +} + + +static const u8 saa7113_tab[] = { + 0x01, 0x08, + 0x02, 0xc0, + 0x03, 0x33, + 0x04, 0x00, + 0x05, 0x00, + 0x06, 0xeb, + 0x07, 0xe0, + 0x08, 0x28, + 0x09, 0x00, + 0x0a, 0x80, + 0x0b, 0x47, + 0x0c, 0x40, + 0x0d, 0x00, + 0x0e, 0x01, + 0x0f, 0x44, + + 0x10, 0x08, + 0x11, 0x0c, + 0x12, 0x7b, + 0x13, 0x00, + 0x15, 0x00, 0x16, 0x00, 0x17, 0x00, + + 0x57, 0xff, + 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07, + 0x5b, 0x83, 0x5e, 0x00, + 0xff +}; + +static int saa7113_init(struct budget_av *budget_av) +{ + struct budget *budget = &budget_av->budget; + struct saa7146_dev *saa = budget->dev; + const u8 *data = saa7113_tab; + + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); + msleep(200); + + if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) { + dprintk(1, "saa7113 not found on KNC card\n"); + return -ENODEV; + } + + dprintk(1, "saa7113 detected and initializing\n"); + + while (*data != 0xff) { + i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1)); + data += 2; + } + + dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f)); + + return 0; +} + +static int saa7113_setinput(struct budget_av *budget_av, int input) +{ + struct budget *budget = &budget_av->budget; + + if (1 != budget_av->has_saa7113) + return -ENODEV; + + if (input == 1) { + i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7); + i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80); + } else if (input == 0) { + i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0); + i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00); + } else + return -EINVAL; + + budget_av->cur_input = input; + return 0; +} + + +static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + u8 m1; + + aclk = 0xb5; + if (srate < 2000000) + bclk = 0x86; + else if (srate < 5000000) + bclk = 0x89; + else if (srate < 15000000) + bclk = 0x8f; + else if (srate < 45000000) + bclk = 0x95; + + m1 = 0x14; + if (srate < 4000000) + m1 = 0x10; + + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + stv0299_writereg(fe, 0x0f, 0x80 | m1); + + return 0; +} + +static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 div; + u8 buf[4]; + struct budget *budget = fe->dvb->priv; + struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; + + if ((c->frequency < 950000) || (c->frequency > 2150000)) + return -EINVAL; + + div = (c->frequency + (125 - 1)) / 125; /* round correctly */ + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; + buf[3] = 0x20; + + if (c->symbol_rate < 4000000) + buf[3] |= 1; + + if (c->frequency < 1250000) + buf[3] |= 0; + else if (c->frequency < 1550000) + buf[3] |= 0x40; + else if (c->frequency < 2050000) + buf[3] |= 0x80; + else if (c->frequency < 2150000) + buf[3] |= 0xC0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static u8 typhoon_cinergy1200s_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, // AGC2 0x3d + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, // lock detector threshold + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 + 0x29, 0x1e, // 1/2 threshold + 0x2a, 0x14, // 2/3 threshold + 0x2b, 0x0f, // 3/4 threshold + 0x2c, 0x09, // 5/6 threshold + 0x2d, 0x05, // 7/8 threshold + 0x2e, 0x01, + 0x31, 0x1f, // test all FECs + 0x32, 0x19, // viterbi and synchro search + 0x33, 0xfc, // rs control + 0x34, 0x93, // error control + 0x0f, 0x92, + 0xff, 0xff +}; + +static const struct stv0299_config typhoon_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, +}; + + +static const struct stv0299_config cinergy_1200s_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, +}; + +static const struct stv0299_config cinergy_1200s_1894_0010_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, +}; + +static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = fe->dvb->priv; + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (c->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (c->frequency < 150000000 ? 0x01 : + c->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static struct tda1002x_config philips_cu1216_config = { + .demod_address = 0x0c, + .invert = 1, +}; + +static struct tda1002x_config philips_cu1216_config_altaddress = { + .demod_address = 0x0d, + .invert = 0, +}; + +static struct tda10023_config philips_cu1216_tda10023_config = { + .demod_address = 0x0c, + .invert = 1, +}; + +static int philips_tu1216_tuner_init(struct dvb_frontend *fe) +{ + struct budget *budget = fe->dvb->priv; + static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; + struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; + + // setup PLL configuration + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + msleep(1); + + return 0; +} + +static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = fe->dvb->priv; + u8 tuner_buf[4]; + struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len = + sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = c->frequency + 36166000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) + cp = 3; + else if (tuner_frequency < 160000000) + cp = 5; + else if (tuner_frequency < 200000000) + cp = 6; + else if (tuner_frequency < 290000000) + cp = 3; + else if (tuner_frequency < 420000000) + cp = 5; + else if (tuner_frequency < 480000000) + cp = 6; + else if (tuner_frequency < 620000000) + cp = 3; + else if (tuner_frequency < 830000000) + cp = 5; + else if (tuner_frequency < 895000000) + cp = 7; + else + return -EINVAL; + + // determine band + if (c->frequency < 49000000) + return -EINVAL; + else if (c->frequency < 161000000) + band = 1; + else if (c->frequency < 444000000) + band = 2; + else if (c->frequency < 861000000) + band = 4; + else + return -EINVAL; + + // setup PLL filter + switch (c->bandwidth_hz) { + case 6000000: + filter = 0; + break; + + case 7000000: + filter = 0; + break; + + case 8000000: + filter = 1; + break; + + default: + return -EINVAL; + } + + // calculate divisor + // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) + tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000; + + // setup tuner buffer + tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xca; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(1); + return 0; +} + +static int philips_tu1216_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct budget *budget = fe->dvb->priv; + + return request_firmware(fw, name, &budget->dev->pci->dev); +} + +static struct tda1004x_config philips_tu1216_config = { + + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 1, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = philips_tu1216_request_firmware, +}; + +static u8 philips_sd1878_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, + 0x05, 0x35, + 0x06, 0x40, + 0x07, 0x00, + 0x08, 0x43, + 0x09, 0x02, + 0x0C, 0x51, + 0x0D, 0x82, + 0x0E, 0x23, + 0x10, 0x3f, + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, + 0x16, 0x19, + 0x17, 0x8c, + 0x18, 0x59, + 0x19, 0xf8, + 0x1a, 0xfe, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x09, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x93, + 0xff, 0xff +}; + +static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + u8 m1; + + aclk = 0xb5; + if (srate < 2000000) + bclk = 0x86; + else if (srate < 5000000) + bclk = 0x89; + else if (srate < 15000000) + bclk = 0x8f; + else if (srate < 45000000) + bclk = 0x95; + + m1 = 0x14; + if (srate < 4000000) + m1 = 0x10; + + stv0299_writereg(fe, 0x0e, 0x23); + stv0299_writereg(fe, 0x0f, 0x94); + stv0299_writereg(fe, 0x10, 0x39); + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x15, 0xc9); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + stv0299_writereg(fe, 0x0f, 0x80 | m1); + + return 0; +} + +static const struct stv0299_config philips_sd1878_config = { + .demod_address = 0x68, + .inittab = philips_sd1878_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_sd1878_ci_set_symbol_rate, +}; + +/* KNC1 DVB-S (STB0899) Inittab */ +static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = { + + { STB0899_DEV_ID , 0x81 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x8c }, + { STB0899_DISF22RX , 0x9a }, + { STB0899_SYSREG , 0x0b }, + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0x30 }, + { STB0899_IRQSTATUS_2 , 0x00 }, + { STB0899_IRQSTATUS_1 , 0x00 }, + { STB0899_IRQSTATUS_0 , 0x00 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x58 }, /* Repeater=8, Stop=disabled */ + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x20 }, + { STB0899_IOPVALUE3 , 0xc9 }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x40 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x08 }, /* 0x1c */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x00 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg knc1_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x41 }, + { STB0899_AGC1REF , 0x08 }, + { STB0899_RTC , 0x7a }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x33 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xee }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xdd }, + { STB0899_LDT2 , 0xc9 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfb }, + { STB0899_QDCCOMP , 0x03 }, + { STB0899_POWERI , 0x3b }, + { STB0899_POWERQ , 0x3d }, + { STB0899_RCOMP , 0x81 }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x04 }, + { STB0899_AGC2I2 , 0xf5 }, + { STB0899_TLIR , 0x25 }, + { STB0899_RTF , 0x80 }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xca }, + { STB0899_CFRM , 0xf1 }, + { STB0899_CFRL , 0xf3 }, + { STB0899_NIRM , 0x2a }, + { STB0899_NIRL , 0x05 }, + { STB0899_ISYMB , 0x17 }, + { STB0899_QSYMB , 0xfa }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0xfd }, + { STB0899_EQUAQ1 , 0x04 }, + { STB0899_EQUAI2 , 0x0f }, + { STB0899_EQUAQ2 , 0xff }, + { STB0899_EQUAI3 , 0xdf }, + { STB0899_EQUAQ3 , 0xfa }, + { STB0899_EQUAI4 , 0x37 }, + { STB0899_EQUAQ4 , 0x0d }, + { STB0899_EQUAI5 , 0xbd }, + { STB0899_EQUAQ5 , 0xf7 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0xff }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x00 }, + { STB0899_ECNT3L , 0x00 }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xf0 }, + { STB0899_VTH23 , 0xa0 }, + { STB0899_VTH34 , 0x78 }, + { STB0899_VTH56 , 0x4e }, + { STB0899_VTH67 , 0x48 }, + { STB0899_VTH78 , 0x38 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x40 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x0c }, + { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x00 }, + { STB0899_TSLLSTKL , 0x00 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0xab }, + { STB0899_PCKLENUL , 0x00 }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xcc }, + { STB0899_TSSTATUS , 0x80 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x96 }, + { STB0899_ERRCTRL3 , 0x89 }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x1f }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0x00 }, + { STB0899_MATSTRL , 0x00 }, + { STB0899_UPLSTRM , 0x00 }, + { STB0899_UPLSTRL , 0x00 }, + { STB0899_DFLSTRM , 0x00 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x00 }, + { STB0899_SYNCDSTRM , 0x00 }, + { STB0899_SYNCDSTRL , 0x00 }, + { STB0899_CFGPDELSTATUS1 , 0x10 }, + { STB0899_CFGPDELSTATUS2 , 0x00 }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x00 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +/* STB0899 demodulator config for the KNC1 and clones */ +static struct stb0899_config knc1_dvbs2_config = { + .init_dev = knc1_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = knc1_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .postproc = NULL, + + .demod_address = 0x68, +// .ts_output_mode = STB0899_OUT_PARALLEL, /* types = SERIAL/PARALLEL */ + .block_sync_mode = STB0899_SYNC_FORCED, /* DSS, SYNC_FORCED/UNSYNCED */ +// .ts_pfbit_toggle = STB0899_MPEG_NORMAL, /* DirecTV, MPEG toggling seq */ + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_OFF, + + .lo_clk = 76500000, + .hi_clk = 90000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = tda8261_get_frequency, + .tuner_set_frequency = tda8261_set_frequency, + .tuner_set_bandwidth = NULL, + .tuner_get_bandwidth = tda8261_get_bandwidth, + .tuner_set_rfsiggain = NULL +}; + +/* + * SD1878/SHA tuner config + * 1F, Single I/P, Horizontal mount, High Sensitivity + */ +static const struct tda8261_config sd1878c_config = { +// .name = "SD1878/SHA", + .addr = 0x60, + .step_size = TDA8261_STEP_1000 /* kHz */ +}; + +static u8 read_pwm(struct budget_av *budget_av) +{ + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1}, + {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} + }; + + if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +#define SUBID_DVBS_KNC1 0x0010 +#define SUBID_DVBS_KNC1_PLUS 0x0011 +#define SUBID_DVBS_TYPHOON 0x4f56 +#define SUBID_DVBS_CINERGY1200 0x1154 +#define SUBID_DVBS_CYNERGY1200N 0x1155 +#define SUBID_DVBS_TV_STAR 0x0014 +#define SUBID_DVBS_TV_STAR_PLUS_X4 0x0015 +#define SUBID_DVBS_TV_STAR_CI 0x0016 +#define SUBID_DVBS2_KNC1 0x0018 +#define SUBID_DVBS2_KNC1_OEM 0x0019 +#define SUBID_DVBS_EASYWATCH_1 0x001a +#define SUBID_DVBS_EASYWATCH_2 0x001b +#define SUBID_DVBS2_EASYWATCH 0x001d +#define SUBID_DVBS_EASYWATCH 0x001e + +#define SUBID_DVBC_EASYWATCH 0x002a +#define SUBID_DVBC_EASYWATCH_MK3 0x002c +#define SUBID_DVBC_KNC1 0x0020 +#define SUBID_DVBC_KNC1_PLUS 0x0021 +#define SUBID_DVBC_KNC1_MK3 0x0022 +#define SUBID_DVBC_KNC1_TDA10024 0x0028 +#define SUBID_DVBC_KNC1_PLUS_MK3 0x0023 +#define SUBID_DVBC_CINERGY1200 0x1156 +#define SUBID_DVBC_CINERGY1200_MK3 0x1176 + +#define SUBID_DVBT_EASYWATCH 0x003a +#define SUBID_DVBT_KNC1_PLUS 0x0031 +#define SUBID_DVBT_KNC1 0x0030 +#define SUBID_DVBT_CINERGY1200 0x1157 + +static void frontend_init(struct budget_av *budget_av) +{ + struct saa7146_dev * saa = budget_av->budget.dev; + struct dvb_frontend * fe = NULL; + + /* Enable / PowerON Frontend */ + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); + + /* Wait for PowerON */ + msleep(100); + + /* additional setup necessary for the PLUS cards */ + switch (saa->pci->subsystem_device) { + case SUBID_DVBS_KNC1_PLUS: + case SUBID_DVBC_KNC1_PLUS: + case SUBID_DVBT_KNC1_PLUS: + case SUBID_DVBC_EASYWATCH: + case SUBID_DVBC_KNC1_PLUS_MK3: + case SUBID_DVBS2_KNC1: + case SUBID_DVBS2_KNC1_OEM: + case SUBID_DVBS2_EASYWATCH: + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI); + break; + } + + switch (saa->pci->subsystem_device) { + + case SUBID_DVBS_KNC1: + /* + * maybe that setting is needed for other dvb-s cards as well, + * but so far it has been only confirmed for this type + */ + budget_av->reinitialise_demod = 1; + fallthrough; + case SUBID_DVBS_KNC1_PLUS: + case SUBID_DVBS_EASYWATCH_1: + if (saa->pci->subsystem_vendor == 0x1894) { + fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config, + &budget_av->budget.i2c_adap); + if (fe) { + dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap); + } + } else { + fe = dvb_attach(stv0299_attach, &typhoon_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } + } + break; + + case SUBID_DVBS_TV_STAR: + case SUBID_DVBS_TV_STAR_PLUS_X4: + case SUBID_DVBS_TV_STAR_CI: + case SUBID_DVBS_CYNERGY1200N: + case SUBID_DVBS_EASYWATCH: + case SUBID_DVBS_EASYWATCH_2: + fe = dvb_attach(stv0299_attach, &philips_sd1878_config, + &budget_av->budget.i2c_adap); + if (fe) { + dvb_attach(dvb_pll_attach, fe, 0x60, + &budget_av->budget.i2c_adap, + DVB_PLL_PHILIPS_SD1878_TDA8261); + } + break; + + case SUBID_DVBS_TYPHOON: + fe = dvb_attach(stv0299_attach, &typhoon_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } + break; + case SUBID_DVBS2_KNC1: + case SUBID_DVBS2_KNC1_OEM: + case SUBID_DVBS2_EASYWATCH: + budget_av->reinitialise_demod = 1; + if ((fe = dvb_attach(stb0899_attach, &knc1_dvbs2_config, &budget_av->budget.i2c_adap))) + dvb_attach(tda8261_attach, fe, &sd1878c_config, &budget_av->budget.i2c_adap); + + break; + case SUBID_DVBS_CINERGY1200: + fe = dvb_attach(stv0299_attach, &cinergy_1200s_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } + break; + + case SUBID_DVBC_KNC1: + case SUBID_DVBC_KNC1_PLUS: + case SUBID_DVBC_CINERGY1200: + case SUBID_DVBC_EASYWATCH: + budget_av->reinitialise_demod = 1; + budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; + fe = dvb_attach(tda10021_attach, &philips_cu1216_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe == NULL) + fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe) { + fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; + } + break; + + case SUBID_DVBC_EASYWATCH_MK3: + case SUBID_DVBC_CINERGY1200_MK3: + case SUBID_DVBC_KNC1_MK3: + case SUBID_DVBC_KNC1_TDA10024: + case SUBID_DVBC_KNC1_PLUS_MK3: + budget_av->reinitialise_demod = 1; + budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; + fe = dvb_attach(tda10023_attach, + &philips_cu1216_tda10023_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe) { + fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; + } + break; + + case SUBID_DVBT_EASYWATCH: + case SUBID_DVBT_KNC1: + case SUBID_DVBT_KNC1_PLUS: + case SUBID_DVBT_CINERGY1200: + budget_av->reinitialise_demod = 1; + fe = dvb_attach(tda10046_attach, &philips_tu1216_config, + &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.init = philips_tu1216_tuner_init; + fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params; + } + break; + } + + if (fe == NULL) { + pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + saa->pci->vendor, + saa->pci->device, + saa->pci->subsystem_vendor, + saa->pci->subsystem_device); + return; + } + + budget_av->budget.dvb_frontend = fe; + + if (dvb_register_frontend(&budget_av->budget.dvb_adapter, + budget_av->budget.dvb_frontend)) { + pr_err("Frontend registration failed!\n"); + dvb_frontend_detach(budget_av->budget.dvb_frontend); + budget_av->budget.dvb_frontend = NULL; + } +} + + +static void budget_av_irq(struct saa7146_dev *dev, u32 * isr) +{ + struct budget_av *budget_av = dev->ext_priv; + + dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av); + + if (*isr & MASK_10) + ttpci_budget_irq10_handler(dev, isr); +} + +static int budget_av_detach(struct saa7146_dev *dev) +{ + struct budget_av *budget_av = dev->ext_priv; + int err; + + dprintk(2, "dev: %p\n", dev); + + if (1 == budget_av->has_saa7113) { + saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO); + + msleep(200); + + saa7146_unregister_device(&budget_av->vd, dev); + + saa7146_vv_release(dev); + } + + if (budget_av->budget.ci_present) + ciintf_deinit(budget_av); + + if (budget_av->budget.dvb_frontend != NULL) { + dvb_unregister_frontend(budget_av->budget.dvb_frontend); + dvb_frontend_detach(budget_av->budget.dvb_frontend); + } + err = ttpci_budget_deinit(&budget_av->budget); + + kfree(budget_av); + + return err; +} + +#define KNC1_INPUTS 2 +static struct v4l2_input knc1_inputs[KNC1_INPUTS] = { + { 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, + V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD }, + { 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, + V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD }, +}; + +static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + dprintk(1, "VIDIOC_ENUMINPUT %d\n", i->index); + if (i->index >= KNC1_INPUTS) + return -EINVAL; + memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input)); + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) +{ + struct saa7146_dev *dev = video_drvdata(file); + struct budget_av *budget_av = dev->ext_priv; + + *i = budget_av->cur_input; + + dprintk(1, "VIDIOC_G_INPUT %d\n", *i); + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int input) +{ + struct saa7146_dev *dev = video_drvdata(file); + struct budget_av *budget_av = dev->ext_priv; + + dprintk(1, "VIDIOC_S_INPUT %d\n", input); + return saa7113_setinput(budget_av, input); +} + +static struct saa7146_ext_vv vv_data; + +static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) +{ + struct budget_av *budget_av; + u8 *mac; + int err; + + dprintk(2, "dev: %p\n", dev); + + if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL))) + return -ENOMEM; + + budget_av->has_saa7113 = 0; + budget_av->budget.ci_present = 0; + + dev->ext_priv = budget_av; + + err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE, + adapter_nr); + if (err) { + kfree(budget_av); + return err; + } + + /* knc1 initialization */ + saa7146_write(dev, DD1_STREAM_B, 0x04000000); + saa7146_write(dev, DD1_INIT, 0x07000600); + saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26); + + if (saa7113_init(budget_av) == 0) { + budget_av->has_saa7113 = 1; + err = saa7146_vv_init(dev, &vv_data); + if (err != 0) { + /* fixme: proper cleanup here */ + ERR("cannot init vv subsystem\n"); + return err; + } + vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; + vv_data.vid_ops.vidioc_g_input = vidioc_g_input; + vv_data.vid_ops.vidioc_s_input = vidioc_s_input; + + if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_VIDEO))) { + /* fixme: proper cleanup here */ + ERR("cannot register capture v4l2 device\n"); + saa7146_vv_release(dev); + return err; + } + + /* beware: this modifies dev->vv ... */ + saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A, + SAA7146_HPS_SYNC_PORT_A); + + saa7113_setinput(budget_av, 0); + } + + /* fixme: find some sane values here... */ + saa7146_write(dev, PCI_BT_V1, 0x1c00101f); + + mac = budget_av->budget.dvb_adapter.proposed_mac; + if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) { + pr_err("KNC1-%d: Could not read MAC from KNC1 card\n", + budget_av->budget.dvb_adapter.num); + eth_zero_addr(mac); + } else { + pr_info("KNC1-%d: MAC addr = %pM\n", + budget_av->budget.dvb_adapter.num, mac); + } + + budget_av->budget.dvb_adapter.priv = budget_av; + frontend_init(budget_av); + ciintf_init(budget_av); + + ttpci_budget_init_hooks(&budget_av->budget); + + return 0; +} + +static struct saa7146_standard standard[] = { + {.name = "PAL",.id = V4L2_STD_PAL, + .v_offset = 0x17,.v_field = 288, + .h_offset = 0x14,.h_pixels = 680, + .v_max_out = 576,.h_max_out = 768 }, + + {.name = "NTSC",.id = V4L2_STD_NTSC, + .v_offset = 0x16,.v_field = 240, + .h_offset = 0x06,.h_pixels = 708, + .v_max_out = 480,.h_max_out = 640, }, +}; + +static struct saa7146_ext_vv vv_data = { + .inputs = 2, + .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113 + .flags = 0, + .stds = &standard[0], + .num_stds = ARRAY_SIZE(standard), +}; + +static struct saa7146_extension budget_extension; + +MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S); +MAKE_BUDGET_INFO(knc1s2,"KNC1 DVB-S2", BUDGET_KNC1S2); +MAKE_BUDGET_INFO(sates2,"Satelco EasyWatch DVB-S2", BUDGET_KNC1S2); +MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C); +MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T); +MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR); +MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR); +MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S); +MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S); +MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP); +MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3); +MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T); +MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP); +MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP); +MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP); +MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3); +MAKE_BUDGET_INFO(knc1ctda10024, "KNC1 DVB-C TDA10024", BUDGET_KNC1C_TDA10024); +MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3); +MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP); +MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); +MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); +MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C); +MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3); +MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T); + +static const struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56), + MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010), + MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010), + MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011), + MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011), + MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014), + MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015), + MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016), + MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0018), + MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0019), + MAKE_EXTENSION_PCI(sates2, 0x1894, 0x001d), + MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e), + MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a), + MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b), + MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a), + MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c), + MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a), + MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020), + MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021), + MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022), + MAKE_EXTENSION_PCI(knc1ctda10024, 0x1894, 0x0028), + MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023), + MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030), + MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031), + MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154), + MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155), + MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156), + MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176), + MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157), + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_extension budget_extension = { + .name = "budget_av", + .flags = SAA7146_USE_I2C_IRQ, + + .pci_tbl = pci_tbl, + + .module = THIS_MODULE, + .attach = budget_av_attach, + .detach = budget_av_detach, + + .irq_mask = MASK_10, + .irq_func = budget_av_irq, +}; + +static int __init budget_av_init(void) +{ + return saa7146_register_extension(&budget_extension); +} + +static void __exit budget_av_exit(void) +{ + saa7146_unregister_extension(&budget_extension); +} + +module_init(budget_av_init); +module_exit(budget_av_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)"); diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c new file mode 100644 index 0000000000..66e1a004ee --- /dev/null +++ b/drivers/media/pci/ttpci/budget-ci.c @@ -0,0 +1,1574 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * budget-ci.c: driver for the SAA7146 based Budget DVB cards + * + * Compiled from various sources by Michael Hunold <michael@mihu.de> + * + * msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM> + * partially based on the Siemens DVB driver by Ralph+Marcus Metzler + * + * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net> + * + * the project's page is at https://linuxtv.org + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <media/rc-core.h> + +#include "budget.h" + +#include <media/dvb_ca_en50221.h> +#include "stv0299.h" +#include "stv0297.h" +#include "tda1004x.h" +#include "stb0899_drv.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" +#include "stb6100.h" +#include "stb6100_cfg.h" +#include "lnbp21.h" +#include "bsbe1.h" +#include "bsru6.h" +#include "tda1002x.h" +#include "tda827x.h" +#include "bsbe1-d01a.h" + +#define MODULE_NAME "budget_ci" + +/* + * Regarding DEBIADDR_IR: + * Some CI modules hang if random addresses are read. + * Using address 0x4000 for the IR read means that we + * use the same address as for CI version, which should + * be a safe default. + */ +#define DEBIADDR_IR 0x4000 +#define DEBIADDR_CICONTROL 0x0000 +#define DEBIADDR_CIVERSION 0x4000 +#define DEBIADDR_IO 0x1000 +#define DEBIADDR_ATTR 0x3000 + +#define CICONTROL_RESET 0x01 +#define CICONTROL_ENABLETS 0x02 +#define CICONTROL_CAMDETECT 0x08 + +#define DEBICICTL 0x00420000 +#define DEBICICAM 0x02420000 + +#define SLOTSTATUS_NONE 1 +#define SLOTSTATUS_PRESENT 2 +#define SLOTSTATUS_RESET 4 +#define SLOTSTATUS_READY 8 +#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) + +/* RC5 device wildcard */ +#define IR_DEVICE_ANY 255 + +static int rc5_device = -1; +module_param(rc5_device, int, 0644); +MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)"); + +static int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct budget_ci_ir { + struct rc_dev *dev; + struct tasklet_struct msp430_irq_tasklet; + char name[72]; /* 40 + 32 for (struct saa7146_dev).name */ + char phys[32]; + int rc5_device; + u32 ir_key; + bool have_command; + bool full_rc5; /* Outputs a full RC5 code */ +}; + +struct budget_ci { + struct budget budget; + struct tasklet_struct ciintf_irq_tasklet; + int slot_status; + int ci_irq; + struct dvb_ca_en50221 ca; + struct budget_ci_ir ir; + u8 tuner_pll_address; /* used for philips_tdm1316l configs */ +}; + +static void msp430_ir_interrupt(struct tasklet_struct *t) +{ + struct budget_ci_ir *ir = from_tasklet(ir, t, msp430_irq_tasklet); + struct budget_ci *budget_ci = container_of(ir, typeof(*budget_ci), ir); + struct rc_dev *dev = budget_ci->ir.dev; + u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8; + + /* + * The msp430 chip can generate two different bytes, command and device + * + * type1: X1CCCCCC, C = command bits (0 - 63) + * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit + * + * Each signal from the remote control can generate one or more command + * bytes and one or more device bytes. For the repeated bytes, the + * highest bit (X) is set. The first command byte is always generated + * before the first device byte. Other than that, no specific order + * seems to apply. To make life interesting, bytes can also be lost. + * + * Only when we have a command and device byte, a keypress is + * generated. + */ + + if (ir_debug) + printk("budget_ci: received byte 0x%02x\n", command); + + /* Remove repeat bit, we use every command */ + command = command & 0x7f; + + /* Is this a RC5 command byte? */ + if (command & 0x40) { + budget_ci->ir.have_command = true; + budget_ci->ir.ir_key = command & 0x3f; + return; + } + + /* It's a RC5 device byte */ + if (!budget_ci->ir.have_command) + return; + budget_ci->ir.have_command = false; + + if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && + budget_ci->ir.rc5_device != (command & 0x1f)) + return; + + if (budget_ci->ir.full_rc5) { + rc_keydown(dev, RC_PROTO_RC5, + RC_SCANCODE_RC5(budget_ci->ir.rc5_device, budget_ci->ir.ir_key), + !!(command & 0x20)); + return; + } + + /* FIXME: We should generate complete scancodes for all devices */ + rc_keydown(dev, RC_PROTO_UNKNOWN, budget_ci->ir.ir_key, + !!(command & 0x20)); +} + +static int msp430_ir_init(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + struct rc_dev *dev; + int error; + + dev = rc_allocate_device(RC_DRIVER_SCANCODE); + if (!dev) { + printk(KERN_ERR "budget_ci: IR interface initialisation failed\n"); + return -ENOMEM; + } + + snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name), + "Budget-CI dvb ir receiver %s", saa->name); + snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys), + "pci-%s/ir0", pci_name(saa->pci)); + + dev->driver_name = MODULE_NAME; + dev->device_name = budget_ci->ir.name; + dev->input_phys = budget_ci->ir.phys; + dev->input_id.bustype = BUS_PCI; + dev->input_id.version = 1; + if (saa->pci->subsystem_vendor) { + dev->input_id.vendor = saa->pci->subsystem_vendor; + dev->input_id.product = saa->pci->subsystem_device; + } else { + dev->input_id.vendor = saa->pci->vendor; + dev->input_id.product = saa->pci->device; + } + dev->dev.parent = &saa->pci->dev; + + if (rc5_device < 0) + budget_ci->ir.rc5_device = IR_DEVICE_ANY; + else + budget_ci->ir.rc5_device = rc5_device; + + /* Select keymap and address */ + switch (budget_ci->budget.dev->pci->subsystem_device) { + case 0x100c: + case 0x100f: + case 0x1011: + case 0x1012: + /* The hauppauge keymap is a superset of these remotes */ + dev->map_name = RC_MAP_HAUPPAUGE; + budget_ci->ir.full_rc5 = true; + + if (rc5_device < 0) + budget_ci->ir.rc5_device = 0x1f; + break; + case 0x1010: + case 0x1017: + case 0x1019: + case 0x101a: + case 0x101b: + /* for the Technotrend 1500 bundled remote */ + dev->map_name = RC_MAP_TT_1500; + break; + default: + /* unknown remote */ + dev->map_name = RC_MAP_BUDGET_CI_OLD; + break; + } + if (!budget_ci->ir.full_rc5) + dev->scancode_mask = 0xff; + + error = rc_register_device(dev); + if (error) { + printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error); + rc_free_device(dev); + return error; + } + + budget_ci->ir.dev = dev; + + tasklet_setup(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt); + + SAA7146_IER_ENABLE(saa, MASK_06); + saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI); + + return 0; +} + +static void msp430_ir_deinit(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + + SAA7146_IER_DISABLE(saa, MASK_06); + saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); + tasklet_kill(&budget_ci->ir.msp430_irq_tasklet); + + rc_unregister_device(budget_ci->ir.dev); +} + +static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) +{ + struct budget_ci *budget_ci = ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, + DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0); +} + +static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) +{ + struct budget_ci *budget_ci = ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, + DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0); +} + +static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) +{ + struct budget_ci *budget_ci = ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, + DEBIADDR_IO | (address & 3), 1, 1, 0); +} + +static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) +{ + struct budget_ci *budget_ci = ca->data; + + if (slot != 0) + return -EINVAL; + + return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, + DEBIADDR_IO | (address & 3), 1, value, 1, 0); +} + +static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_ci *budget_ci = ca->data; + struct saa7146_dev *saa = budget_ci->budget.dev; + + if (slot != 0) + return -EINVAL; + + if (budget_ci->ci_irq) { + // trigger on RISING edge during reset so we know when READY is re-asserted + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); + } + budget_ci->slot_status = SLOTSTATUS_RESET; + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); + msleep(1); + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + CICONTROL_RESET, 1, 0); + + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + return 0; +} + +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_ci *budget_ci = ca->data; + struct saa7146_dev *saa = budget_ci->budget.dev; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + return 0; +} + +static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct budget_ci *budget_ci = ca->data; + struct saa7146_dev *saa = budget_ci->budget.dev; + int tmp; + + if (slot != 0) + return -EINVAL; + + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); + + tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + tmp | CICONTROL_ENABLETS, 1, 0); + + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); + return 0; +} + +static void ciintf_interrupt(struct tasklet_struct *t) +{ + struct budget_ci *budget_ci = from_tasklet(budget_ci, t, + ciintf_irq_tasklet); + struct saa7146_dev *saa = budget_ci->budget.dev; + unsigned int flags; + + // ensure we don't get spurious IRQs during initialisation + if (!budget_ci->budget.ci_present) + return; + + // read the CAM status + flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + if (flags & CICONTROL_CAMDETECT) { + + // GPIO should be set to trigger on falling edge if a CAM is present + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); + + if (budget_ci->slot_status & SLOTSTATUS_NONE) { + // CAM insertion IRQ + budget_ci->slot_status = SLOTSTATUS_PRESENT; + dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + + } else if (budget_ci->slot_status & SLOTSTATUS_RESET) { + // CAM ready (reset completed) + budget_ci->slot_status = SLOTSTATUS_READY; + dvb_ca_en50221_camready_irq(&budget_ci->ca, 0); + + } else if (budget_ci->slot_status & SLOTSTATUS_READY) { + // FR/DA IRQ + dvb_ca_en50221_frda_irq(&budget_ci->ca, 0); + } + } else { + + // trigger on rising edge if a CAM is not present - when a CAM is inserted, we + // only want to get the IRQ when it sets READY. If we trigger on the falling edge, + // the CAM might not actually be ready yet. + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); + + // generate a CAM removal IRQ if we haven't already + if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) { + // CAM removal IRQ + budget_ci->slot_status = SLOTSTATUS_NONE; + dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); + } + } +} + +static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct budget_ci *budget_ci = ca->data; + unsigned int flags; + + // ensure we don't get spurious IRQs during initialisation + if (!budget_ci->budget.ci_present) + return -EINVAL; + + // read the CAM status + flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + if (flags & CICONTROL_CAMDETECT) { + // mark it as present if it wasn't before + if (budget_ci->slot_status & SLOTSTATUS_NONE) { + budget_ci->slot_status = SLOTSTATUS_PRESENT; + } + + // during a RESET, we check if we can read from IO memory to see when CAM is ready + if (budget_ci->slot_status & SLOTSTATUS_RESET) { + if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) { + budget_ci->slot_status = SLOTSTATUS_READY; + } + } + } else { + budget_ci->slot_status = SLOTSTATUS_NONE; + } + + if (budget_ci->slot_status != SLOTSTATUS_NONE) { + if (budget_ci->slot_status & SLOTSTATUS_READY) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } + return DVB_CA_EN50221_POLL_CAM_PRESENT; + } + + return 0; +} + +static int ciintf_init(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + int flags; + int result; + int ci_version; + int ca_flags; + + memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221)); + + // enable DEBI pins + saa7146_write(saa, MC1, MASK_27 | MASK_11); + + // test if it is there + ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0); + if ((ci_version & 0xa0) != 0xa0) { + result = -ENODEV; + goto error; + } + + // determine whether a CAM is present or not + flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); + budget_ci->slot_status = SLOTSTATUS_NONE; + if (flags & CICONTROL_CAMDETECT) + budget_ci->slot_status = SLOTSTATUS_PRESENT; + + // version 0xa2 of the CI firmware doesn't generate interrupts + if (ci_version == 0xa2) { + ca_flags = 0; + budget_ci->ci_irq = 0; + } else { + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | + DVB_CA_EN50221_FLAG_IRQ_FR | + DVB_CA_EN50221_FLAG_IRQ_DA; + budget_ci->ci_irq = 1; + } + + // register CI interface + budget_ci->ca.owner = THIS_MODULE; + budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem; + budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem; + budget_ci->ca.read_cam_control = ciintf_read_cam_control; + budget_ci->ca.write_cam_control = ciintf_write_cam_control; + budget_ci->ca.slot_reset = ciintf_slot_reset; + budget_ci->ca.slot_shutdown = ciintf_slot_shutdown; + budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable; + budget_ci->ca.poll_slot_status = ciintf_poll_slot_status; + budget_ci->ca.data = budget_ci; + if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter, + &budget_ci->ca, + ca_flags, 1)) != 0) { + printk("budget_ci: CI interface detected, but initialisation failed.\n"); + goto error; + } + + // Setup CI slot IRQ + if (budget_ci->ci_irq) { + tasklet_setup(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt); + if (budget_ci->slot_status != SLOTSTATUS_NONE) { + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); + } else { + saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); + } + SAA7146_IER_ENABLE(saa, MASK_03); + } + + // enable interface + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + CICONTROL_RESET, 1, 0); + + // success! + printk("budget_ci: CI interface initialised\n"); + budget_ci->budget.ci_present = 1; + + // forge a fake CI IRQ so the CAM state is setup correctly + if (budget_ci->ci_irq) { + flags = DVB_CA_EN50221_CAMCHANGE_REMOVED; + if (budget_ci->slot_status != SLOTSTATUS_NONE) + flags = DVB_CA_EN50221_CAMCHANGE_INSERTED; + dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags); + } + + return 0; + +error: + saa7146_write(saa, MC1, MASK_27); + return result; +} + +static void ciintf_deinit(struct budget_ci *budget_ci) +{ + struct saa7146_dev *saa = budget_ci->budget.dev; + + // disable CI interrupts + if (budget_ci->ci_irq) { + SAA7146_IER_DISABLE(saa, MASK_03); + saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); + tasklet_kill(&budget_ci->ciintf_irq_tasklet); + } + + // reset interface + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); + msleep(1); + ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, + CICONTROL_RESET, 1, 0); + + // disable TS data stream to CI interface + saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); + + // release the CA device + dvb_ca_en50221_release(&budget_ci->ca); + + // disable DEBI pins + saa7146_write(saa, MC1, MASK_27); +} + +static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr) +{ + struct budget_ci *budget_ci = dev->ext_priv; + + dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci); + + if (*isr & MASK_06) + tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet); + + if (*isr & MASK_10) + ttpci_budget_irq10_handler(dev, isr); + + if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq)) + tasklet_schedule(&budget_ci->ciintf_irq_tasklet); +} + +static u8 philips_su1278_tt_inittab[] = { + 0x01, 0x0f, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x5b, + 0x05, 0x85, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x02, + 0x09, 0x00, + 0x0C, 0x01, + 0x0D, 0x81, + 0x0E, 0x44, + 0x0f, 0x14, + 0x10, 0x3c, + 0x11, 0x84, + 0x12, 0xda, + 0x13, 0x97, + 0x14, 0x95, + 0x15, 0xc9, + 0x16, 0x19, + 0x17, 0x8c, + 0x18, 0x59, + 0x19, 0xf8, + 0x1a, 0xfe, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x09, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x93, + 0xff, 0xff +}; + +static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) +{ + stv0299_writereg(fe, 0x0e, 0x44); + if (srate >= 10000000) { + stv0299_writereg(fe, 0x13, 0x97); + stv0299_writereg(fe, 0x14, 0x95); + stv0299_writereg(fe, 0x15, 0xc9); + stv0299_writereg(fe, 0x17, 0x8c); + stv0299_writereg(fe, 0x1a, 0xfe); + stv0299_writereg(fe, 0x1c, 0x7f); + stv0299_writereg(fe, 0x2d, 0x09); + } else { + stv0299_writereg(fe, 0x13, 0x99); + stv0299_writereg(fe, 0x14, 0x8d); + stv0299_writereg(fe, 0x15, 0xce); + stv0299_writereg(fe, 0x17, 0x43); + stv0299_writereg(fe, 0x1a, 0x1d); + stv0299_writereg(fe, 0x1c, 0x12); + stv0299_writereg(fe, 0x2d, 0x05); + } + stv0299_writereg(fe, 0x0e, 0x23); + stv0299_writereg(fe, 0x0f, 0x94); + stv0299_writereg(fe, 0x10, 0x39); + stv0299_writereg(fe, 0x15, 0xc9); + + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + + return 0; +} + +static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_ci *budget_ci = fe->dvb->priv; + u32 div; + u8 buf[4]; + struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; + + if ((p->frequency < 950000) || (p->frequency > 2150000)) + return -EINVAL; + + div = (p->frequency + (500 - 1)) / 500; /* round correctly */ + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2; + buf[3] = 0x20; + + if (p->symbol_rate < 4000000) + buf[3] |= 1; + + if (p->frequency < 1250000) + buf[3] |= 0; + else if (p->frequency < 1550000) + buf[3] |= 0x40; + else if (p->frequency < 2050000) + buf[3] |= 0x80; + else if (p->frequency < 2150000) + buf[3] |= 0xC0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static const struct stv0299_config philips_su1278_tt_config = { + + .demod_address = 0x68, + .inittab = philips_su1278_tt_inittab, + .mclk = 64000000UL, + .invert = 0, + .skip_reinit = 1, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 50, + .set_symbol_rate = philips_su1278_tt_set_symbol_rate, +}; + + + +static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe) +{ + struct budget_ci *budget_ci = fe->dvb->priv; + static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; + static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len = + sizeof(td1316_init) }; + + // setup PLL configuration + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + msleep(1); + + // disable the mc44BC374c (do not check for errors) + tuner_msg.addr = 0x65; + tuner_msg.buf = disable_mc44BC374c; + tuner_msg.len = sizeof(disable_mc44BC374c); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1); + } + + return 0; +} + +static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_ci *budget_ci = fe->dvb->priv; + u8 tuner_buf[4]; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = p->frequency + 36130000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) + cp = 3; + else if (tuner_frequency < 160000000) + cp = 5; + else if (tuner_frequency < 200000000) + cp = 6; + else if (tuner_frequency < 290000000) + cp = 3; + else if (tuner_frequency < 420000000) + cp = 5; + else if (tuner_frequency < 480000000) + cp = 6; + else if (tuner_frequency < 620000000) + cp = 3; + else if (tuner_frequency < 830000000) + cp = 5; + else if (tuner_frequency < 895000000) + cp = 7; + else + return -EINVAL; + + // determine band + if (p->frequency < 49000000) + return -EINVAL; + else if (p->frequency < 159000000) + band = 1; + else if (p->frequency < 444000000) + band = 2; + else if (p->frequency < 861000000) + band = 4; + else + return -EINVAL; + + // setup PLL filter and TDA9889 + switch (p->bandwidth_hz) { + case 6000000: + tda1004x_writereg(fe, 0x0C, 0x14); + filter = 0; + break; + + case 7000000: + tda1004x_writereg(fe, 0x0C, 0x80); + filter = 0; + break; + + case 8000000: + tda1004x_writereg(fe, 0x0C, 0x14); + filter = 1; + break; + + default: + return -EINVAL; + } + + // calculate divisor + // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6) + tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000; + + // setup tuner buffer + tuner_buf[0] = tuner_frequency >> 8; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xca; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(1); + return 0; +} + +static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct budget_ci *budget_ci = fe->dvb->priv; + + return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev); +} + +static struct tda1004x_config philips_tdm1316l_config = { + + .demod_address = 0x8, + .invert = 0, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = philips_tdm1316l_request_firmware, +}; + +static struct tda1004x_config philips_tdm1316l_config_invert = { + + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = philips_tdm1316l_request_firmware, +}; + +static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct budget_ci *budget_ci = fe->dvb->priv; + u8 tuner_buf[5]; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address, + .flags = 0, + .buf = tuner_buf, + .len = sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = p->frequency + 36125000; + if (tuner_frequency < 87000000) + return -EINVAL; + else if (tuner_frequency < 130000000) { + cp = 3; + band = 1; + } else if (tuner_frequency < 160000000) { + cp = 5; + band = 1; + } else if (tuner_frequency < 200000000) { + cp = 6; + band = 1; + } else if (tuner_frequency < 290000000) { + cp = 3; + band = 2; + } else if (tuner_frequency < 420000000) { + cp = 5; + band = 2; + } else if (tuner_frequency < 480000000) { + cp = 6; + band = 2; + } else if (tuner_frequency < 620000000) { + cp = 3; + band = 4; + } else if (tuner_frequency < 830000000) { + cp = 5; + band = 4; + } else if (tuner_frequency < 895000000) { + cp = 7; + band = 4; + } else + return -EINVAL; + + // assume PLL filter should always be 8MHz for the moment. + filter = 1; + + // calculate divisor + tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500; + + // setup tuner buffer + tuner_buf[0] = tuner_frequency >> 8; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xc8; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + tuner_buf[4] = 0x80; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(50); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) + return -EIO; + + msleep(1); + + return 0; +} + +static u8 dvbc_philips_tdm1316l_inittab[] = { + 0x80, 0x01, + 0x80, 0x00, + 0x81, 0x01, + 0x81, 0x00, + 0x00, 0x09, + 0x01, 0x69, + 0x03, 0x00, + 0x04, 0x00, + 0x07, 0x00, + 0x08, 0x00, + 0x20, 0x00, + 0x21, 0x40, + 0x22, 0x00, + 0x23, 0x00, + 0x24, 0x40, + 0x25, 0x88, + 0x30, 0xff, + 0x31, 0x00, + 0x32, 0xff, + 0x33, 0x00, + 0x34, 0x50, + 0x35, 0x7f, + 0x36, 0x00, + 0x37, 0x20, + 0x38, 0x00, + 0x40, 0x1c, + 0x41, 0xff, + 0x42, 0x29, + 0x43, 0x20, + 0x44, 0xff, + 0x45, 0x00, + 0x46, 0x00, + 0x49, 0x04, + 0x4a, 0x00, + 0x4b, 0x7b, + 0x52, 0x30, + 0x55, 0xae, + 0x56, 0x47, + 0x57, 0xe1, + 0x58, 0x3a, + 0x5a, 0x1e, + 0x5b, 0x34, + 0x60, 0x00, + 0x63, 0x00, + 0x64, 0x00, + 0x65, 0x00, + 0x66, 0x00, + 0x67, 0x00, + 0x68, 0x00, + 0x69, 0x00, + 0x6a, 0x02, + 0x6b, 0x00, + 0x70, 0xff, + 0x71, 0x00, + 0x72, 0x00, + 0x73, 0x00, + 0x74, 0x0c, + 0x80, 0x00, + 0x81, 0x00, + 0x82, 0x00, + 0x83, 0x00, + 0x84, 0x04, + 0x85, 0x80, + 0x86, 0x24, + 0x87, 0x78, + 0x88, 0x10, + 0x89, 0x00, + 0x90, 0x01, + 0x91, 0x01, + 0xa0, 0x04, + 0xa1, 0x00, + 0xa2, 0x00, + 0xb0, 0x91, + 0xb1, 0x0b, + 0xc0, 0x53, + 0xc1, 0x70, + 0xc2, 0x12, + 0xd0, 0x00, + 0xd1, 0x00, + 0xd2, 0x00, + 0xd3, 0x00, + 0xd4, 0x00, + 0xd5, 0x00, + 0xde, 0x00, + 0xdf, 0x00, + 0x61, 0x38, + 0x62, 0x0a, + 0x53, 0x13, + 0x59, 0x08, + 0xff, 0xff, +}; + +static struct stv0297_config dvbc_philips_tdm1316l_config = { + .demod_address = 0x1c, + .inittab = dvbc_philips_tdm1316l_inittab, + .invert = 0, + .stop_during_read = 1, +}; + +static struct tda10023_config tda10023_config = { + .demod_address = 0xc, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .deltaf = 0xa511, +}; + +static struct tda827x_config tda827x_config = { + .config = 0, +}; + +/* TT S2-3200 DVB-S (STB0899) Inittab */ +static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = { + + { STB0899_DEV_ID , 0x81 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x8c }, + { STB0899_DISF22RX , 0x9a }, + { STB0899_SYSREG , 0x0b }, + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0x30 }, + { STB0899_IRQSTATUS_2 , 0x00 }, + { STB0899_IRQSTATUS_1 , 0x00 }, + { STB0899_IRQSTATUS_0 , 0x00 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */ + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x20 }, + { STB0899_IOPVALUE3 , 0xc9 }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x40 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x00 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x41 }, + { STB0899_AGC1REF , 0x10 }, + { STB0899_RTC , 0x7a }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x34 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xc7 }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xdd }, + { STB0899_LDT2 , 0xc9 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfb }, + { STB0899_QDCCOMP , 0x03 }, + { STB0899_POWERI , 0x3b }, + { STB0899_POWERQ , 0x3d }, + { STB0899_RCOMP , 0x81 }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x04 }, + { STB0899_AGC2I2 , 0xf5 }, + { STB0899_TLIR , 0x25 }, + { STB0899_RTF , 0x80 }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xca }, + { STB0899_CFRM , 0xf1 }, + { STB0899_CFRL , 0xf3 }, + { STB0899_NIRM , 0x2a }, + { STB0899_NIRL , 0x05 }, + { STB0899_ISYMB , 0x17 }, + { STB0899_QSYMB , 0xfa }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0xfd }, + { STB0899_EQUAQ1 , 0x04 }, + { STB0899_EQUAI2 , 0x0f }, + { STB0899_EQUAQ2 , 0xff }, + { STB0899_EQUAI3 , 0xdf }, + { STB0899_EQUAQ3 , 0xfa }, + { STB0899_EQUAI4 , 0x37 }, + { STB0899_EQUAQ4 , 0x0d }, + { STB0899_EQUAI5 , 0xbd }, + { STB0899_EQUAQ5 , 0xf7 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0xff }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x00 }, + { STB0899_ECNT3L , 0x00 }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xf0 }, + { STB0899_VTH23 , 0xa0 }, + { STB0899_VTH34 , 0x78 }, + { STB0899_VTH56 , 0x4e }, + { STB0899_VTH67 , 0x48 }, + { STB0899_VTH78 , 0x38 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x40 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x0c }, + { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x00 }, + { STB0899_TSLLSTKL , 0x00 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0xab }, + { STB0899_PCKLENUL , 0x00 }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xcc }, + { STB0899_TSSTATUS , 0x80 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x96 }, + { STB0899_ERRCTRL3 , 0x89 }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x1f }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0x00 }, + { STB0899_MATSTRL , 0x00 }, + { STB0899_UPLSTRM , 0x00 }, + { STB0899_UPLSTRL , 0x00 }, + { STB0899_DFLSTRM , 0x00 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x00 }, + { STB0899_SYNCDSTRM , 0x00 }, + { STB0899_SYNCDSTRL , 0x00 }, + { STB0899_CFGPDELSTATUS1 , 0x10 }, + { STB0899_CFGPDELSTATUS2 , 0x00 }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x00 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +static struct stb0899_config tt3200_config = { + .init_dev = tt3200_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = tt3200_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .postproc = NULL, + + .demod_address = 0x68, + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_ON, + + .lo_clk = 76500000, + .hi_clk = 99000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL +}; + +static struct stb6100_config tt3200_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static void frontend_init(struct budget_ci *budget_ci) +{ + switch (budget_ci->budget.dev->pci->subsystem_device) { + case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059)) + budget_ci->budget.dvb_frontend = + dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; + break; + } + break; + + case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059)) + budget_ci->budget.dvb_frontend = + dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params; + break; + } + break; + + case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt)) + budget_ci->tuner_pll_address = 0x61; + budget_ci->budget.dvb_frontend = + dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; + break; + } + break; + + case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889) + budget_ci->tuner_pll_address = 0x63; + budget_ci->budget.dvb_frontend = + dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; + break; + } + break; + + case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt)) + budget_ci->tuner_pll_address = 0x60; + budget_ci->budget.dvb_frontend = + dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; + break; + } + break; + + case 0x1017: // TT S-1500 PCI + budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; + budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; + + budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) { + printk("%s: No LNBP21 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */ + budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48); + if (budget_ci->budget.dvb_frontend) { + if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) { + printk(KERN_ERR "%s: No tda827x found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */ + budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) { + if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { + printk(KERN_ERR "%s: No LNBP21 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } else { + printk(KERN_ERR "%s: No STB6000 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + case 0x1019: // TT S2-3200 PCI + /* + * NOTE! on some STB0899 versions, the internal PLL takes a longer time + * to settle, aka LOCK. On the older revisions of the chip, we don't see + * this, as a result on the newer chips the entire clock tree, will not + * be stable after a freshly POWER 'ed up situation. + * In this case, we should RESET the STB0899 (Active LOW) and wait for + * PLL stabilization. + * + * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is + * connected to the SAA7146 GPIO, GPIO2, Pin 142 + */ + /* Reset Demodulator */ + saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO); + /* Wait for everything to die */ + msleep(50); + /* Pull it up out of Reset state */ + saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI); + /* Wait for PLL to stabilize */ + msleep(250); + /* + * PLL state should be stable now. Ideally, we should check + * for PLL LOCK status. But well, never mind! + */ + budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) { + if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { + printk("%s: No LNBP21 found!\n", __func__); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } else { + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } + break; + + } + + if (budget_ci->budget.dvb_frontend == NULL) { + printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + budget_ci->budget.dev->pci->vendor, + budget_ci->budget.dev->pci->device, + budget_ci->budget.dev->pci->subsystem_vendor, + budget_ci->budget.dev->pci->subsystem_device); + } else { + if (dvb_register_frontend + (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) { + printk("budget-ci: Frontend registration failed!\n"); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + budget_ci->budget.dvb_frontend = NULL; + } + } +} + +static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) +{ + struct budget_ci *budget_ci; + int err; + + budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL); + if (!budget_ci) { + err = -ENOMEM; + goto out1; + } + + dprintk(2, "budget_ci: %p\n", budget_ci); + + dev->ext_priv = budget_ci; + + err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE, + adapter_nr); + if (err) + goto out2; + + err = msp430_ir_init(budget_ci); + if (err) + goto out3; + + ciintf_init(budget_ci); + + budget_ci->budget.dvb_adapter.priv = budget_ci; + frontend_init(budget_ci); + + ttpci_budget_init_hooks(&budget_ci->budget); + + return 0; + +out3: + ttpci_budget_deinit(&budget_ci->budget); +out2: + kfree(budget_ci); +out1: + return err; +} + +static int budget_ci_detach(struct saa7146_dev *dev) +{ + struct budget_ci *budget_ci = dev->ext_priv; + struct saa7146_dev *saa = budget_ci->budget.dev; + int err; + + if (budget_ci->budget.ci_present) + ciintf_deinit(budget_ci); + msp430_ir_deinit(budget_ci); + if (budget_ci->budget.dvb_frontend) { + dvb_unregister_frontend(budget_ci->budget.dvb_frontend); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); + } + err = ttpci_budget_deinit(&budget_ci->budget); + + // disable frontend and CI interface + saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); + + kfree(budget_ci); + + return err; +} + +static struct saa7146_extension budget_extension; + +MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC); +MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT); + +static const struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c), + MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f), + MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010), + MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011), + MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012), + MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), + MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a), + MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019), + MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b), + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_extension budget_extension = { + .name = "budget_ci dvb", + .flags = SAA7146_USE_I2C_IRQ, + + .module = THIS_MODULE, + .pci_tbl = &pci_tbl[0], + .attach = budget_ci_attach, + .detach = budget_ci_detach, + + .irq_mask = MASK_03 | MASK_06 | MASK_10, + .irq_func = budget_ci_irq, +}; + +static int __init budget_ci_init(void) +{ + return saa7146_register_extension(&budget_extension); +} + +static void __exit budget_ci_exit(void) +{ + saa7146_unregister_extension(&budget_extension); +} + +module_init(budget_ci_init); +module_exit(budget_ci_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards w/ CI-module produced by Siemens, Technotrend, Hauppauge"); diff --git a/drivers/media/pci/ttpci/budget-core.c b/drivers/media/pci/ttpci/budget-core.c new file mode 100644 index 0000000000..25f44c3eeb --- /dev/null +++ b/drivers/media/pci/ttpci/budget-core.c @@ -0,0 +1,603 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * budget-core.c: driver for the SAA7146 based Budget DVB cards + * + * Compiled from various sources by Michael Hunold <michael@mihu.de> + * + * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de> + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * 26feb2004 Support for FS Activy Card (Grundig tuner) by + * Michael Dreher <michael@5dot1.de>, + * Oliver Endriss <o.endriss@gmx.de>, + * Andreas 'randy' Weinberger + * + * the project's page is at https://linuxtv.org + */ + + +#include "budget.h" +#include "ttpci-eeprom.h" + +#define TS_WIDTH (2 * TS_SIZE) +#define TS_WIDTH_ACTIVY TS_SIZE +#define TS_WIDTH_DVBC TS_SIZE +#define TS_HEIGHT_MASK 0xf00 +#define TS_HEIGHT_MASK_ACTIVY 0xc00 +#define TS_HEIGHT_MASK_DVBC 0xe00 +#define TS_MIN_BUFSIZE_K 188 +#define TS_MAX_BUFSIZE_K 1410 +#define TS_MAX_BUFSIZE_K_ACTIVY 564 +#define TS_MAX_BUFSIZE_K_DVBC 1316 +#define BUFFER_WARNING_WAIT (30*HZ) + +int budget_debug; +static int dma_buffer_size = TS_MIN_BUFSIZE_K; +module_param_named(debug, budget_debug, int, 0644); +module_param_named(bufsize, dma_buffer_size, int, 0444); +MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off)."); +MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)"); + +/**************************************************************************** + * TT budget / WinTV Nova + ****************************************************************************/ + +static int stop_ts_capture(struct budget *budget) +{ + dprintk(2, "budget: %p\n", budget); + + saa7146_write(budget->dev, MC1, MASK_20); // DMA3 off + SAA7146_IER_DISABLE(budget->dev, MASK_10); + return 0; +} + +static int start_ts_capture(struct budget *budget) +{ + struct saa7146_dev *dev = budget->dev; + + dprintk(2, "budget: %p\n", budget); + + if (!budget->feeding || !budget->fe_synced) + return 0; + + saa7146_write(dev, MC1, MASK_20); // DMA3 off + + memset(budget->grabbing, 0x00, budget->buffer_size); + + saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000)); + + budget->ttbp = 0; + + /* + * Signal path on the Activy: + * + * tuner -> SAA7146 port A -> SAA7146 BRS -> SAA7146 DMA3 -> memory + * + * Since the tuner feeds 204 bytes packets into the SAA7146, + * DMA3 is configured to strip the trailing 16 FEC bytes: + * Pitch: 188, NumBytes3: 188, NumLines3: 1024 + */ + + switch(budget->card->type) { + case BUDGET_FS_ACTIVY: + saa7146_write(dev, DD1_INIT, 0x04000000); + saa7146_write(dev, MC2, (MASK_09 | MASK_25)); + saa7146_write(dev, BRS_CTRL, 0x00000000); + break; + case BUDGET_PATCH: + saa7146_write(dev, DD1_INIT, 0x00000200); + saa7146_write(dev, MC2, (MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x60000000); + break; + case BUDGET_CIN1200C_MK3: + case BUDGET_KNC1C_MK3: + case BUDGET_KNC1C_TDA10024: + case BUDGET_KNC1CP_MK3: + if (budget->video_port == BUDGET_VIDEO_PORTA) { + saa7146_write(dev, DD1_INIT, 0x06000200); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x00000000); + } else { + saa7146_write(dev, DD1_INIT, 0x00000600); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x60000000); + } + break; + default: + if (budget->video_port == BUDGET_VIDEO_PORTA) { + saa7146_write(dev, DD1_INIT, 0x06000200); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x00000000); + } else { + saa7146_write(dev, DD1_INIT, 0x02000600); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + saa7146_write(dev, BRS_CTRL, 0x60000000); + } + } + + saa7146_write(dev, MC2, (MASK_08 | MASK_24)); + mdelay(10); + + saa7146_write(dev, BASE_ODD3, 0); + if (budget->buffer_size > budget->buffer_height * budget->buffer_width) { + // using odd/even buffers + saa7146_write(dev, BASE_EVEN3, budget->buffer_height * budget->buffer_width); + } else { + // using a single buffer + saa7146_write(dev, BASE_EVEN3, 0); + } + saa7146_write(dev, PROT_ADDR3, budget->buffer_size); + saa7146_write(dev, BASE_PAGE3, budget->pt.dma | ME1 | 0x90); + + saa7146_write(dev, PITCH3, budget->buffer_width); + saa7146_write(dev, NUM_LINE_BYTE3, + (budget->buffer_height << 16) | budget->buffer_width); + + saa7146_write(dev, MC2, (MASK_04 | MASK_20)); + + SAA7146_ISR_CLEAR(budget->dev, MASK_10); /* VPE */ + SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */ + saa7146_write(dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */ + + return 0; +} + +static int budget_read_fe_status(struct dvb_frontend *fe, + enum fe_status *status) +{ + struct budget *budget = fe->dvb->priv; + int synced; + int ret; + + if (budget->read_fe_status) + ret = budget->read_fe_status(fe, status); + else + ret = -EINVAL; + + if (!ret) { + synced = (*status & FE_HAS_LOCK); + if (synced != budget->fe_synced) { + budget->fe_synced = synced; + spin_lock(&budget->feedlock); + if (synced) + start_ts_capture(budget); + else + stop_ts_capture(budget); + spin_unlock(&budget->feedlock); + } + } + return ret; +} + +static void vpeirq(struct tasklet_struct *t) +{ + struct budget *budget = from_tasklet(budget, t, vpe_tasklet); + u8 *mem = (u8 *) (budget->grabbing); + u32 olddma = budget->ttbp; + u32 newdma = saa7146_read(budget->dev, PCI_VDP3); + u32 count; + + /* Ensure streamed PCI data is synced to CPU */ + dma_sync_sg_for_cpu(&budget->dev->pci->dev, budget->pt.slist, + budget->pt.nents, DMA_FROM_DEVICE); + + /* nearest lower position divisible by 188 */ + newdma -= newdma % 188; + + if (newdma >= budget->buffer_size) + return; + + budget->ttbp = newdma; + + if (budget->feeding == 0 || newdma == olddma) + return; + + if (newdma > olddma) { /* no wraparound, dump olddma..newdma */ + count = newdma - olddma; + dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); + } else { /* wraparound, dump olddma..buflen and 0..newdma */ + count = budget->buffer_size - olddma; + dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); + count += newdma; + dvb_dmx_swfilter_packets(&budget->demux, mem, newdma / 188); + } + + if (count > budget->buffer_warning_threshold) + budget->buffer_warnings++; + + if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) { + printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n", + budget->dev->name, __func__, budget->buffer_warnings, count); + budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT; + budget->buffer_warnings = 0; + } +} + + +static int ttpci_budget_debiread_nolock(struct budget *budget, u32 config, + int addr, int count, int nobusyloop) +{ + struct saa7146_dev *saa = budget->dev; + int result; + + result = saa7146_wait_for_debi_done(saa, nobusyloop); + if (result < 0) + return result; + + saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x10000 | (addr & 0xffff)); + saa7146_write(saa, DEBI_CONFIG, config); + saa7146_write(saa, DEBI_PAGE, 0); + saa7146_write(saa, MC2, (2 << 16) | 2); + + result = saa7146_wait_for_debi_done(saa, nobusyloop); + if (result < 0) + return result; + + result = saa7146_read(saa, DEBI_AD); + result &= (0xffffffffUL >> ((4 - count) * 8)); + return result; +} + +int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count, + int uselocks, int nobusyloop) +{ + if (count > 4 || count <= 0) + return 0; + + if (uselocks) { + unsigned long flags; + int result; + + spin_lock_irqsave(&budget->debilock, flags); + result = ttpci_budget_debiread_nolock(budget, config, addr, + count, nobusyloop); + spin_unlock_irqrestore(&budget->debilock, flags); + return result; + } + return ttpci_budget_debiread_nolock(budget, config, addr, + count, nobusyloop); +} + +static int ttpci_budget_debiwrite_nolock(struct budget *budget, u32 config, + int addr, int count, u32 value, int nobusyloop) +{ + struct saa7146_dev *saa = budget->dev; + int result; + + result = saa7146_wait_for_debi_done(saa, nobusyloop); + if (result < 0) + return result; + + saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x00000 | (addr & 0xffff)); + saa7146_write(saa, DEBI_CONFIG, config); + saa7146_write(saa, DEBI_PAGE, 0); + saa7146_write(saa, DEBI_AD, value); + saa7146_write(saa, MC2, (2 << 16) | 2); + + result = saa7146_wait_for_debi_done(saa, nobusyloop); + return result < 0 ? result : 0; +} + +int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr, + int count, u32 value, int uselocks, int nobusyloop) +{ + if (count > 4 || count <= 0) + return 0; + + if (uselocks) { + unsigned long flags; + int result; + + spin_lock_irqsave(&budget->debilock, flags); + result = ttpci_budget_debiwrite_nolock(budget, config, addr, + count, value, nobusyloop); + spin_unlock_irqrestore(&budget->debilock, flags); + return result; + } + return ttpci_budget_debiwrite_nolock(budget, config, addr, + count, value, nobusyloop); +} + + +/**************************************************************************** + * DVB API SECTION + ****************************************************************************/ + +static int budget_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct budget *budget = demux->priv; + int status = 0; + + dprintk(2, "budget: %p\n", budget); + + if (!demux->dmx.frontend) + return -EINVAL; + + spin_lock(&budget->feedlock); + feed->pusi_seen = false; /* have a clean section start */ + if (budget->feeding++ == 0) + status = start_ts_capture(budget); + spin_unlock(&budget->feedlock); + return status; +} + +static int budget_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct budget *budget = demux->priv; + int status = 0; + + dprintk(2, "budget: %p\n", budget); + + spin_lock(&budget->feedlock); + if (--budget->feeding == 0) + status = stop_ts_capture(budget); + spin_unlock(&budget->feedlock); + return status; +} + +static int budget_register(struct budget *budget) +{ + struct dvb_demux *dvbdemux = &budget->demux; + int ret; + + dprintk(2, "budget: %p\n", budget); + + dvbdemux->priv = (void *) budget; + + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = budget_start_feed; + dvbdemux->stop_feed = budget_stop_feed; + dvbdemux->write_to_decoder = NULL; + + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING); + + dvb_dmx_init(&budget->demux); + + budget->dmxdev.filternum = 256; + budget->dmxdev.demux = &dvbdemux->dmx; + budget->dmxdev.capabilities = 0; + + dvb_dmxdev_init(&budget->dmxdev, &budget->dvb_adapter); + + budget->hw_frontend.source = DMX_FRONTEND_0; + + ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->hw_frontend); + + if (ret < 0) + goto err_release_dmx; + + budget->mem_frontend.source = DMX_MEMORY_FE; + ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->mem_frontend); + if (ret < 0) + goto err_release_dmx; + + ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, &budget->hw_frontend); + if (ret < 0) + goto err_release_dmx; + + dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx); + + return 0; + +err_release_dmx: + dvb_dmxdev_release(&budget->dmxdev); + dvb_dmx_release(&budget->demux); + return ret; +} + +static void budget_unregister(struct budget *budget) +{ + struct dvb_demux *dvbdemux = &budget->demux; + + dprintk(2, "budget: %p\n", budget); + + dvb_net_release(&budget->dvb_net); + + dvbdemux->dmx.close(&dvbdemux->dmx); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->hw_frontend); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->mem_frontend); + + dvb_dmxdev_release(&budget->dmxdev); + dvb_dmx_release(&budget->demux); +} + +int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, + struct saa7146_pci_extension_data *info, + struct module *owner, short *adapter_nums) +{ + int ret = 0; + struct budget_info *bi = info->ext_priv; + int max_bufsize; + int height_mask; + + memset(budget, 0, sizeof(struct budget)); + + dprintk(2, "dev: %p, budget: %p\n", dev, budget); + + budget->card = bi; + budget->dev = (struct saa7146_dev *) dev; + + switch(budget->card->type) { + case BUDGET_FS_ACTIVY: + budget->buffer_width = TS_WIDTH_ACTIVY; + max_bufsize = TS_MAX_BUFSIZE_K_ACTIVY; + height_mask = TS_HEIGHT_MASK_ACTIVY; + break; + + case BUDGET_KNC1C: + case BUDGET_KNC1CP: + case BUDGET_CIN1200C: + case BUDGET_KNC1C_MK3: + case BUDGET_KNC1C_TDA10024: + case BUDGET_KNC1CP_MK3: + case BUDGET_CIN1200C_MK3: + budget->buffer_width = TS_WIDTH_DVBC; + max_bufsize = TS_MAX_BUFSIZE_K_DVBC; + height_mask = TS_HEIGHT_MASK_DVBC; + break; + + default: + budget->buffer_width = TS_WIDTH; + max_bufsize = TS_MAX_BUFSIZE_K; + height_mask = TS_HEIGHT_MASK; + } + + if (dma_buffer_size < TS_MIN_BUFSIZE_K) + dma_buffer_size = TS_MIN_BUFSIZE_K; + else if (dma_buffer_size > max_bufsize) + dma_buffer_size = max_bufsize; + + budget->buffer_height = dma_buffer_size * 1024 / budget->buffer_width; + if (budget->buffer_height > 0xfff) { + budget->buffer_height /= 2; + budget->buffer_height &= height_mask; + budget->buffer_size = 2 * budget->buffer_height * budget->buffer_width; + } else { + budget->buffer_height &= height_mask; + budget->buffer_size = budget->buffer_height * budget->buffer_width; + } + budget->buffer_warning_threshold = budget->buffer_size * 80/100; + budget->buffer_warnings = 0; + budget->buffer_warning_time = jiffies; + + dprintk(2, "%s: buffer type = %s, width = %d, height = %d\n", + budget->dev->name, + budget->buffer_size > budget->buffer_width * budget->buffer_height ? "odd/even" : "single", + budget->buffer_width, budget->buffer_height); + printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size); + + ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name, + owner, &budget->dev->pci->dev, adapter_nums); + if (ret < 0) + return ret; + + /* set dd1 stream a & b */ + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, MC2, (MASK_09 | MASK_25)); + saa7146_write(dev, MC2, (MASK_10 | MASK_26)); + saa7146_write(dev, DD1_INIT, 0x02000000); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + if (bi->type != BUDGET_FS_ACTIVY) + budget->video_port = BUDGET_VIDEO_PORTB; + else + budget->video_port = BUDGET_VIDEO_PORTA; + spin_lock_init(&budget->feedlock); + spin_lock_init(&budget->debilock); + + /* the Siemens DVB needs this if you want to have the i2c chips + get recognized before the main driver is loaded */ + if (bi->type != BUDGET_FS_ACTIVY) + saa7146_write(dev, GPIO_CTRL, 0x500000); /* GPIO 3 = 1 */ + + strscpy(budget->i2c_adap.name, budget->card->name, + sizeof(budget->i2c_adap.name)); + + saa7146_i2c_adapter_prepare(dev, &budget->i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120); + strscpy(budget->i2c_adap.name, budget->card->name, + sizeof(budget->i2c_adap.name)); + + if (i2c_add_adapter(&budget->i2c_adap) < 0) { + ret = -ENOMEM; + goto err_dvb_unregister; + } + + ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac); + + budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt); + if (NULL == budget->grabbing) { + ret = -ENOMEM; + goto err_del_i2c; + } + + saa7146_write(dev, PCI_BT_V1, 0x001c0000); + /* upload all */ + saa7146_write(dev, GPIO_CTRL, 0x000000); + + tasklet_setup(&budget->vpe_tasklet, vpeirq); + + /* frontend power on */ + if (bi->type != BUDGET_FS_ACTIVY) + saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); + + if ((ret = budget_register(budget)) == 0) + return 0; /* Everything OK */ + + /* An error occurred, cleanup resources */ + saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt); + +err_del_i2c: + i2c_del_adapter(&budget->i2c_adap); + +err_dvb_unregister: + dvb_unregister_adapter(&budget->dvb_adapter); + + return ret; +} + +void ttpci_budget_init_hooks(struct budget *budget) +{ + if (budget->dvb_frontend && !budget->read_fe_status) { + budget->read_fe_status = budget->dvb_frontend->ops.read_status; + budget->dvb_frontend->ops.read_status = budget_read_fe_status; + } +} + +int ttpci_budget_deinit(struct budget *budget) +{ + struct saa7146_dev *dev = budget->dev; + + dprintk(2, "budget: %p\n", budget); + + budget_unregister(budget); + + tasklet_kill(&budget->vpe_tasklet); + + saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt); + + i2c_del_adapter(&budget->i2c_adap); + + dvb_unregister_adapter(&budget->dvb_adapter); + + return 0; +} + +void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr) +{ + struct budget *budget = dev->ext_priv; + + dprintk(8, "dev: %p, budget: %p\n", dev, budget); + + if (*isr & MASK_10) + tasklet_schedule(&budget->vpe_tasklet); +} + +void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port) +{ + struct budget *budget = dev->ext_priv; + + spin_lock(&budget->feedlock); + budget->video_port = video_port; + if (budget->feeding) { + stop_ts_capture(budget); + start_ts_capture(budget); + } + spin_unlock(&budget->feedlock); +} + +EXPORT_SYMBOL_GPL(ttpci_budget_debiread); +EXPORT_SYMBOL_GPL(ttpci_budget_debiwrite); +EXPORT_SYMBOL_GPL(ttpci_budget_init); +EXPORT_SYMBOL_GPL(ttpci_budget_init_hooks); +EXPORT_SYMBOL_GPL(ttpci_budget_deinit); +EXPORT_SYMBOL_GPL(ttpci_budget_irq10_handler); +EXPORT_SYMBOL_GPL(ttpci_budget_set_video_port); +EXPORT_SYMBOL_GPL(budget_debug); + +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/ttpci/budget.c b/drivers/media/pci/ttpci/budget.c new file mode 100644 index 0000000000..b76a1b330b --- /dev/null +++ b/drivers/media/pci/ttpci/budget.c @@ -0,0 +1,883 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * budget.c: driver for the SAA7146 based Budget DVB cards + * + * Compiled from various sources by Michael Hunold <michael@mihu.de> + * + * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de> + * + * Copyright (C) 1999-2002 Ralph Metzler + * & Marcus Metzler for convergence integrated media GmbH + * + * 26feb2004 Support for FS Activy Card (Grundig tuner) by + * Michael Dreher <michael@5dot1.de>, + * Oliver Endriss <o.endriss@gmx.de> and + * Andreas 'randy' Weinberger + * + * the project's page is at https://linuxtv.org + */ + +#include "budget.h" +#include "stv0299.h" +#include "ves1x93.h" +#include "ves1820.h" +#include "l64781.h" +#include "tda8083.h" +#include "s5h1420.h" +#include "tda10086.h" +#include "tda826x.h" +#include "lnbp21.h" +#include "bsru6.h" +#include "bsbe1.h" +#include "tdhd1.h" +#include "stv6110x.h" +#include "stv090x.h" +#include "isl6423.h" +#include "lnbh24.h" + + +static int diseqc_method; +module_param(diseqc_method, int, 0444); +MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static void Set22K (struct budget *budget, int state) +{ + struct saa7146_dev *dev=budget->dev; + dprintk(2, "budget: %p\n", budget); + saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO)); +} + +/* Diseqc functions only for TT Budget card */ +/* taken from the Skyvision DVB driver by + Ralph Metzler <rjkm@metzlerbros.de> */ + +static void DiseqcSendBit (struct budget *budget, int data) +{ + struct saa7146_dev *dev=budget->dev; + dprintk(2, "budget: %p\n", budget); + + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); + udelay(data ? 500 : 1000); + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + udelay(data ? 1000 : 500); +} + +static void DiseqcSendByte (struct budget *budget, int data) +{ + int i, par=1, d; + + dprintk(2, "budget: %p\n", budget); + + for (i=7; i>=0; i--) { + d = (data>>i)&1; + par ^= d; + DiseqcSendBit(budget, d); + } + + DiseqcSendBit(budget, par); +} + +static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst) +{ + struct saa7146_dev *dev=budget->dev; + int i; + + dprintk(2, "budget: %p\n", budget); + + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + mdelay(16); + + for (i=0; i<len; i++) + DiseqcSendByte(budget, msg[i]); + + mdelay(16); + + if (burst!=-1) { + if (burst) + DiseqcSendByte(budget, 0xff); + else { + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); + mdelay(12); + udelay(500); + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + } + msleep(20); + } + + return 0; +} + +/* + * Routines for the Fujitsu Siemens Activy budget card + * 22 kHz tone and DiSEqC are handled by the frontend. + * Voltage must be set here. + * GPIO 1: LNBP EN, GPIO 2: LNBP VSEL + */ +static int SetVoltage_Activy(struct budget *budget, + enum fe_sec_voltage voltage) +{ + struct saa7146_dev *dev=budget->dev; + + dprintk(2, "budget: %p\n", budget); + + switch (voltage) { + case SEC_VOLTAGE_13: + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); + saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO); + break; + case SEC_VOLTAGE_18: + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); + saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); + break; + case SEC_VOLTAGE_OFF: + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int siemens_budget_set_voltage(struct dvb_frontend *fe, + enum fe_sec_voltage voltage) +{ + struct budget *budget = fe->dvb->priv; + + return SetVoltage_Activy (budget, voltage); +} + +static int budget_set_tone(struct dvb_frontend *fe, + enum fe_sec_tone_mode tone) +{ + struct budget *budget = fe->dvb->priv; + + switch (tone) { + case SEC_TONE_ON: + Set22K (budget, 1); + break; + + case SEC_TONE_OFF: + Set22K (budget, 0); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +{ + struct budget *budget = fe->dvb->priv; + + SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0); + + return 0; +} + +static int budget_diseqc_send_burst(struct dvb_frontend *fe, + enum fe_sec_mini_cmd minicmd) +{ + struct budget *budget = fe->dvb->priv; + + SendDiSEqCMsg (budget, 0, NULL, minicmd); + + return 0; +} + +static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = fe->dvb->priv; + u8 pwr = 0; + u8 buf[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + u32 div = (c->frequency + 479500) / 125; + + if (c->frequency > 2000000) + pwr = 3; + else if (c->frequency > 1800000) + pwr = 2; + else if (c->frequency > 1600000) + pwr = 1; + else if (c->frequency > 1200000) + pwr = 0; + else if (c->frequency >= 1100000) + pwr = 1; + else pwr = 2; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = ((div & 0x18000) >> 10) | 0x95; + buf[3] = (pwr << 6) | 0x30; + + // NOTE: since we're using a prescaler of 2, we set the + // divisor frequency to 62.5kHz and divide by 125 above + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + return 0; +} + +static struct ves1x93_config alps_bsrv2_config = +{ + .demod_address = 0x08, + .xin = 90100000UL, + .invert_pwm = 0, +}; + +static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = (c->frequency + 35937500 + 31250) / 62500; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x85 | ((div >> 10) & 0x60); + data[3] = (c->frequency < 174000000 ? 0x88 : c->frequency < 470000000 ? 0x84 : 0x81); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + return 0; +} + +static struct ves1820_config alps_tdbe2_config = { + .demod_address = 0x09, + .xin = 57840000UL, + .invert = 1, + .selagc = VES1820_SELAGC_SIGNAMPERR, +}; + +static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = fe->dvb->priv; + u8 *tuner_addr = fe->tuner_priv; + u32 div; + u8 cfg, cpump, band_select; + u8 data[4]; + struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) }; + + if (tuner_addr) + msg.addr = *tuner_addr; + else + msg.addr = 0x61; + + div = (36125000 + c->frequency) / 166666; + + cfg = 0x88; + + if (c->frequency < 175000000) + cpump = 2; + else if (c->frequency < 390000000) + cpump = 1; + else if (c->frequency < 470000000) + cpump = 2; + else if (c->frequency < 750000000) + cpump = 1; + else + cpump = 3; + + if (c->frequency < 175000000) + band_select = 0x0e; + else if (c->frequency < 470000000) + band_select = 0x05; + else + band_select = 0x03; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = ((div >> 10) & 0x60) | cfg; + data[3] = (cpump << 6) | band_select; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + return 0; +} + +static struct l64781_config grundig_29504_401_config = { + .demod_address = 0x55, +}; + +static struct l64781_config grundig_29504_401_config_activy = { + .demod_address = 0x54, +}; + +static u8 tuner_address_grundig_29504_401_activy = 0x60; + +static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = c->frequency / 125; + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x8e; + data[3] = 0x00; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + return 0; +} + +static struct tda8083_config grundig_29504_451_config = { + .demod_address = 0x68, +}; + +static int s5h1420_tuner_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct budget *budget = fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = c->frequency / 1000; + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0xc2; + + if (div < 1450) + data[3] = 0x00; + else if (div < 1850) + data[3] = 0x40; + else if (div < 2000) + data[3] = 0x80; + else + data[3] = 0xc0; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + + return 0; +} + +static struct s5h1420_config s5h1420_config = { + .demod_address = 0x53, + .invert = 1, + .cdclk_polarity = 1, +}; + +static struct tda10086_config tda10086_config = { + .demod_address = 0x0e, + .invert = 0, + .diseqc_tone = 1, + .xtal_freq = TDA10086_XTAL_16M, +}; + +static const struct stv0299_config alps_bsru6_config_activy = { + .demod_address = 0x68, + .inittab = alps_bsru6_inittab, + .mclk = 88000000UL, + .invert = 1, + .op0_off = 1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsru6_set_symbol_rate, +}; + +static const struct stv0299_config alps_bsbe1_config_activy = { + .demod_address = 0x68, + .inittab = alps_bsbe1_inittab, + .mclk = 88000000UL, + .invert = 1, + .op0_off = 1, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsbe1_set_symbol_rate, +}; + +static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) +{ + struct budget *budget = fe->dvb->priv; + + return request_firmware(fw, name, &budget->dev->pci->dev); +} + + +static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg) +{ + u8 val; + struct i2c_msg msg[] = { + { .addr = adr, .flags = 0, .buf = ®, .len = 1 }, + { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 } + }; + + return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val; +} + +static u8 read_pwm(struct budget* budget) +{ + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, + { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; + + if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static struct stv090x_config tt1600_stv090x_config = { + .device = STV0903, + .demod_mode = STV090x_SINGLE, + .clk_mode = STV090x_CLK_EXT, + + .xtal = 13500000, + .address = 0x68, + + .ts1_mode = STV090x_TSMODE_DVBCI, + .ts2_mode = STV090x_TSMODE_SERIAL_CONTINUOUS, + + .repeater_level = STV090x_RPTLEVEL_16, + + .tuner_init = NULL, + .tuner_sleep = NULL, + .tuner_set_mode = NULL, + .tuner_set_frequency = NULL, + .tuner_get_frequency = NULL, + .tuner_set_bandwidth = NULL, + .tuner_get_bandwidth = NULL, + .tuner_set_bbgain = NULL, + .tuner_get_bbgain = NULL, + .tuner_set_refclk = NULL, + .tuner_get_status = NULL, +}; + +static struct stv6110x_config tt1600_stv6110x_config = { + .addr = 0x60, + .refclk = 27000000, + .clk_div = 2, +}; + +static struct isl6423_config tt1600_isl6423_config = { + .current_max = SEC_CURRENT_515m, + .curlim = SEC_CURRENT_LIM_ON, + .mod_extern = 1, + .addr = 0x08, +}; + +static void frontend_init(struct budget *budget) +{ + (void)alps_bsbe1_config; /* avoid warning */ + + switch(budget->dev->pci->subsystem_device) { + case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) + case 0x1013: + // try the ALPS BSRV2 first of all + budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params; + budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; + budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops.set_tone = budget_set_tone; + break; + } + + // try the ALPS BSRU6 now + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) { + budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; + budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops.set_tone = budget_set_tone; + } + break; + } + break; + + case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659)) + + budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget)); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params; + break; + } + break; + + case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060)) + + budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + budget->dvb_frontend->tuner_priv = NULL; + break; + } + break; + + case 0x4f52: /* Cards based on Philips Semi Sylt PCI ref. design */ + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSRU6 in Philips Semi. Sylt detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + break; + } + break; + + case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */ + { + int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67); + + if (subtype < 0) + break; + /* fixme: find a better way to identify the card */ + if (subtype < 0x36) { + /* assume ALPS BSRU6 */ + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + break; + } + } else { + /* assume ALPS BSBE1 */ + /* reset tuner */ + saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO); + msleep(50); + saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI); + msleep(250); + budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n"); + budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + break; + } + } + break; + } + + case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522)) + budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params; + budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; + budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; + } + break; + + case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */ + budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + } + break; + + case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */ + budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy; + budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + } + break; + + case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260)) + { + struct dvb_frontend *fe; + + fe = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = s5h1420_tuner_set_params; + budget->dvb_frontend = fe; + if (dvb_attach(lnbp21_attach, fe, &budget->i2c_adap, + 0, 0) == NULL) { + printk("%s: No LNBP21 found!\n", __func__); + goto error_out; + } + break; + } + } + fallthrough; + case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262) + { + struct dvb_frontend *fe; + + // gpio2 is connected to CLB - reset it + leave it high + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); + msleep(1); + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); + msleep(1); + + fe = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap); + if (fe) { + budget->dvb_frontend = fe; + if (dvb_attach(tda826x_attach, fe, 0x60, + &budget->i2c_adap, 0) == NULL) + printk("%s: No tda826x found!\n", __func__); + if (dvb_attach(lnbp21_attach, fe, + &budget->i2c_adap, 0, 0) == NULL) { + printk("%s: No LNBP21 found!\n", __func__); + goto error_out; + } + break; + } + } + fallthrough; + + case 0x101c: { /* TT S2-1600 */ + const struct stv6110x_devctl *ctl; + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); + msleep(50); + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); + msleep(250); + + budget->dvb_frontend = dvb_attach(stv090x_attach, + &tt1600_stv090x_config, + &budget->i2c_adap, + STV090x_DEMODULATOR_0); + + if (budget->dvb_frontend) { + + ctl = dvb_attach(stv6110x_attach, + budget->dvb_frontend, + &tt1600_stv6110x_config, + &budget->i2c_adap); + + if (ctl) { + tt1600_stv090x_config.tuner_init = ctl->tuner_init; + tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep; + tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; + tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; + tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; + tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; + tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; + tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; + tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; + tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; + tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; + + /* call the init function once to initialize + tuner's clock output divider and demod's + master clock */ + if (budget->dvb_frontend->ops.init) + budget->dvb_frontend->ops.init(budget->dvb_frontend); + + if (dvb_attach(isl6423_attach, + budget->dvb_frontend, + &budget->i2c_adap, + &tt1600_isl6423_config) == NULL) { + printk(KERN_ERR "%s: No Intersil ISL6423 found!\n", __func__); + goto error_out; + } + } else { + printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); + goto error_out; + } + } + } + break; + + case 0x1020: { /* Omicom S2 */ + const struct stv6110x_devctl *ctl; + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); + msleep(50); + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); + msleep(250); + + budget->dvb_frontend = dvb_attach(stv090x_attach, + &tt1600_stv090x_config, + &budget->i2c_adap, + STV090x_DEMODULATOR_0); + + if (budget->dvb_frontend) { + printk(KERN_INFO "budget: Omicom S2 detected\n"); + + ctl = dvb_attach(stv6110x_attach, + budget->dvb_frontend, + &tt1600_stv6110x_config, + &budget->i2c_adap); + + if (ctl) { + tt1600_stv090x_config.tuner_init = ctl->tuner_init; + tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep; + tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; + tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; + tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; + tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; + tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; + tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; + tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; + tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; + tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; + + /* call the init function once to initialize + tuner's clock output divider and demod's + master clock */ + if (budget->dvb_frontend->ops.init) + budget->dvb_frontend->ops.init(budget->dvb_frontend); + + if (dvb_attach(lnbh24_attach, + budget->dvb_frontend, + &budget->i2c_adap, + LNBH24_PCL | LNBH24_TTX, + LNBH24_TEN, 0x14>>1) == NULL) { + printk(KERN_ERR + "No LNBH24 found!\n"); + goto error_out; + } + } else { + printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); + goto error_out; + } + } + } + break; + } + + if (budget->dvb_frontend == NULL) { + printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", + budget->dev->pci->vendor, + budget->dev->pci->device, + budget->dev->pci->subsystem_vendor, + budget->dev->pci->subsystem_device); + } else { + if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) + goto error_out; + } + return; + +error_out: + printk("budget: Frontend registration failed!\n"); + dvb_frontend_detach(budget->dvb_frontend); + budget->dvb_frontend = NULL; + return; +} + +static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) +{ + struct budget *budget = NULL; + int err; + + budget = kmalloc(sizeof(struct budget), GFP_KERNEL); + if( NULL == budget ) { + return -ENOMEM; + } + + dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget); + + dev->ext_priv = budget; + + err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); + if (err) { + printk("==> failed\n"); + kfree (budget); + return err; + } + + budget->dvb_adapter.priv = budget; + frontend_init(budget); + + ttpci_budget_init_hooks(budget); + + return 0; +} + +static int budget_detach (struct saa7146_dev* dev) +{ + struct budget *budget = dev->ext_priv; + int err; + + if (budget->dvb_frontend) { + dvb_unregister_frontend(budget->dvb_frontend); + dvb_frontend_detach(budget->dvb_frontend); + } + + err = ttpci_budget_deinit (budget); + + kfree (budget); + dev->ext_priv = NULL; + + return err; +} + +static struct saa7146_extension budget_extension; + +MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); +MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC); +MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(omicom, "Omicom S2 PCI", BUDGET_TT); +MAKE_BUDGET_INFO(sylt, "Philips Semi Sylt PCI", BUDGET_TT_HW_DISEQC); + +static const struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), + MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), + MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), + MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), + MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), + MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018), + MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c), + MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), + MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), + MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60), + MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61), + MAKE_EXTENSION_PCI(omicom, 0x14c4, 0x1020), + MAKE_EXTENSION_PCI(sylt, 0x1131, 0x4f52), + { + .vendor = 0, + } +}; + +MODULE_DEVICE_TABLE(pci, pci_tbl); + +static struct saa7146_extension budget_extension = { + .name = "budget dvb", + .flags = SAA7146_USE_I2C_IRQ, + + .module = THIS_MODULE, + .pci_tbl = pci_tbl, + .attach = budget_attach, + .detach = budget_detach, + + .irq_mask = MASK_10, + .irq_func = ttpci_budget_irq10_handler, +}; + +static int __init budget_init(void) +{ + return saa7146_register_extension(&budget_extension); +} + +static void __exit budget_exit(void) +{ + saa7146_unregister_extension(&budget_extension); +} + +module_init(budget_init); +module_exit(budget_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards by Siemens, Technotrend, Hauppauge"); diff --git a/drivers/media/pci/ttpci/budget.h b/drivers/media/pci/ttpci/budget.h new file mode 100644 index 0000000000..bd87432e6c --- /dev/null +++ b/drivers/media/pci/ttpci/budget.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __BUDGET_DVB__ +#define __BUDGET_DVB__ + +#include <media/dvb_frontend.h> +#include <media/dvbdev.h> +#include <media/demux.h> +#include <media/dvb_demux.h> +#include <media/dmxdev.h> +#include <media/dvb_net.h> + +#include <linux/module.h> +#include <linux/mutex.h> + +#include <media/drv-intf/saa7146.h> + +extern int budget_debug; + +#ifdef dprintk +#undef dprintk +#endif + +#define dprintk(level, fmt, arg...) do { \ + if (level & budget_debug) \ + printk(KERN_DEBUG KBUILD_MODNAME ": %s(): " fmt, \ + __func__, ##arg); \ +} while (0) + +#define TS_SIZE 188 + +struct budget_info { + char *name; + int type; +}; + +/* place to store all the necessary device information */ +struct budget { + + /* devices */ + struct dvb_device dvb_dev; + struct dvb_net dvb_net; + + struct saa7146_dev *dev; + + struct i2c_adapter i2c_adap; + struct budget_info *card; + + unsigned char *grabbing; + struct saa7146_pgtable pt; + + struct tasklet_struct fidb_tasklet; + struct tasklet_struct vpe_tasklet; + + struct dmxdev dmxdev; + struct dvb_demux demux; + + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + + int ci_present; + int video_port; + + u32 buffer_width; + u32 buffer_height; + u32 buffer_size; + u32 buffer_warning_threshold; + u32 buffer_warnings; + unsigned long buffer_warning_time; + + u32 ttbp; + int feeding; + + spinlock_t feedlock; + + spinlock_t debilock; + + struct dvb_adapter dvb_adapter; + struct dvb_frontend *dvb_frontend; + int (*read_fe_status)(struct dvb_frontend *fe, enum fe_status *status); + int fe_synced; + + void *priv; +}; + +#define MAKE_BUDGET_INFO(x_var,x_name,x_type) \ +static struct budget_info x_var ## _info = { \ + .name=x_name, \ + .type=x_type }; \ +static struct saa7146_pci_extension_data x_var = { \ + .ext_priv = &x_var ## _info, \ + .ext = &budget_extension }; + +#define BUDGET_TT 0 +#define BUDGET_TT_HW_DISEQC 1 +#define BUDGET_PATCH 3 +#define BUDGET_FS_ACTIVY 4 +#define BUDGET_CIN1200S 5 +#define BUDGET_CIN1200C 6 +#define BUDGET_CIN1200T 7 +#define BUDGET_KNC1S 8 +#define BUDGET_KNC1C 9 +#define BUDGET_KNC1T 10 +#define BUDGET_KNC1SP 11 +#define BUDGET_KNC1CP 12 +#define BUDGET_KNC1TP 13 +#define BUDGET_TVSTAR 14 +#define BUDGET_CIN1200C_MK3 15 +#define BUDGET_KNC1C_MK3 16 +#define BUDGET_KNC1CP_MK3 17 +#define BUDGET_KNC1S2 18 +#define BUDGET_KNC1C_TDA10024 19 + +#define BUDGET_VIDEO_PORTA 0 +#define BUDGET_VIDEO_PORTB 1 + +extern int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, + struct saa7146_pci_extension_data *info, + struct module *owner, short *adapter_nums); +extern void ttpci_budget_init_hooks(struct budget *budget); +extern int ttpci_budget_deinit(struct budget *budget); +extern void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr); +extern void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port); +extern int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count, + int uselocks, int nobusyloop); +extern int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr, int count, u32 value, + int uselocks, int nobusyloop); + +#endif |