diff options
Diffstat (limited to 'drivers/media/radio/Kconfig')
| -rw-r--r-- | drivers/media/radio/Kconfig | 509 |
1 files changed, 509 insertions, 0 deletions
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig new file mode 100644 index 0000000000..d52eccdc7e --- /dev/null +++ b/drivers/media/radio/Kconfig @@ -0,0 +1,509 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Multimedia Video device configuration +# + +menuconfig RADIO_ADAPTERS + tristate "Radio Adapters" + depends on VIDEO_DEV + depends on MEDIA_RADIO_SUPPORT + default VIDEO_DEV + help + Say Y here to enable selecting AM/FM radio adapters. + +if RADIO_ADAPTERS + +config RADIO_MAXIRADIO + tristate "Guillemot MAXI Radio FM 2000 radio" + depends on PCI && HAS_IOPORT + select RADIO_TEA575X + help + Choose Y here if you have this radio card. This card may also be + found as Gemtek PCI FM. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + <file:Documentation/userspace-api/media/index.rst>. + + To compile this driver as a module, choose M here: the + module will be called radio-maxiradio. + +config RADIO_SAA7706H + tristate "SAA7706H Car Radio DSP" + depends on I2C + help + Say Y here if you want to use the SAA7706H Car radio Digital + Signal Processor, found for instance on the Russellville development + board. On the russellville the device is connected to internal + timberdale I2C bus. + + To compile this driver as a module, choose M here: the + module will be called SAA7706H. + +config RADIO_SHARK + tristate "Griffin radioSHARK USB radio receiver" + depends on USB + select RADIO_TEA575X + help + Choose Y here if you have this radio receiver. + + There are 2 versions of this device, this driver is for version 1, + which is white. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + <file:Documentation/userspace-api/media/index.rst>. + + To compile this driver as a module, choose M here: the + module will be called radio-shark. + +config RADIO_SHARK2 + tristate "Griffin radioSHARK2 USB radio receiver" + depends on USB + help + Choose Y here if you have this radio receiver. + + There are 2 versions of this device, this driver is for version 2, + which is black. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + <file:Documentation/userspace-api/media/index.rst>. + + To compile this driver as a module, choose M here: the + module will be called radio-shark2. + +config RADIO_SI4713 + tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support" + +config RADIO_SI476X + tristate "Silicon Laboratories Si476x I2C FM Radio" + depends on I2C + depends on MFD_SI476X_CORE + depends on SND_SOC + select SND_SOC_SI476X + help + Choose Y here if you have this FM radio chip. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux 2 API. Information on + this API and pointers to "v4l2" programs may be found at + <file:Documentation/userspace-api/media/index.rst>. + + To compile this driver as a module, choose M here: the + module will be called radio-si476x. + +config RADIO_TEA575X + tristate + +config RADIO_TEA5764 + tristate "TEA5764 I2C FM radio support" + depends on I2C + help + Say Y here if you want to use the TEA5764 FM chip found in + EZX phones. This FM chip is present in EZX phones from Motorola, + connected to internal pxa I2C bus. + + To compile this driver as a module, choose M here: the + module will be called radio-tea5764. + +config RADIO_TEA5764_XTAL + bool "TEA5764 crystal reference" + depends on RADIO_TEA5764=y + default y + help + Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N + here if TEA5764 reference frequency is connected in FREQIN. + +config RADIO_TEF6862 + tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" + depends on I2C + help + Say Y here if you want to use the TEF6862 Car Radio Enhanced + Selectivity Tuner, found for instance on the Russellville development + board. On the russellville the device is connected to internal + timberdale I2C bus. + + To compile this driver as a module, choose M here: the + module will be called TEF6862. + +config RADIO_TIMBERDALE + tristate "Enable the Timberdale radio driver" + depends on MFD_TIMBERDALE + depends on I2C # for RADIO_SAA7706H + select RADIO_TEF6862 + select RADIO_SAA7706H + help + This is a kind of umbrella driver for the Radio Tuner and DSP + found behind the Timberdale FPGA on the Russellville board. + Enabling this driver will automatically select the DSP and tuner. + +config RADIO_WL1273 + tristate "Texas Instruments WL1273 I2C FM Radio" + depends on I2C + select MFD_CORE + select MFD_WL1273_CORE + select FW_LOADER + help + Choose Y here if you have this FM radio chip. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux 2 API. Information on + this API and pointers to "v4l2" programs may be found at + <file:Documentation/userspace-api/media/index.rst>. + + To compile this driver as a module, choose M here: the + module will be called radio-wl1273. + +config USB_DSBR + tristate "D-Link/GemTek USB FM radio support" + depends on USB + help + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + To compile this driver as a module, choose M here: the + module will be called dsbr100. + +config USB_KEENE + tristate "Keene FM Transmitter USB support" + depends on USB + help + Say Y here if you want to connect this type of FM transmitter + to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called radio-keene. + +config USB_MA901 + tristate "Masterkit MA901 USB FM radio support" + depends on USB + help + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers or headphones. + + To compile this driver as a module, choose M here: the + module will be called radio-ma901. + +config USB_MR800 + tristate "AverMedia MR 800 USB FM radio support" + depends on USB + help + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + To compile this driver as a module, choose M here: the + module will be called radio-mr800. + +config USB_RAREMONO + tristate "Thanko's Raremono AM/FM/SW radio support" + depends on USB + help + The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc. + It is one of the very few or perhaps the only consumer USB radio device + to receive the AM/FM/SW bands. + + Say Y here if you want to connect this type of AM/FM/SW receiver + to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called radio-raremono. + +source "drivers/media/radio/si470x/Kconfig" +source "drivers/media/radio/si4713/Kconfig" + +# TI's ST based wl128x FM radio + +source "drivers/media/radio/wl128x/Kconfig" + +# +# ISA drivers configuration +# + +menuconfig V4L_RADIO_ISA_DRIVERS + bool "ISA radio devices" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + help + Say Y here to enable support for these ISA drivers. + +if V4L_RADIO_ISA_DRIVERS + +config RADIO_AZTECH + tristate "Aztech/Packard Bell Radio" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + select RADIO_ISA + help + Choose Y here if you have one of these FM radio cards, and then fill + in the port address below. + + To compile this driver as a module, choose M here: the + module will be called radio-aztech. + +config RADIO_AZTECH_PORT + hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" + depends on RADIO_AZTECH=y + default "350" + help + Enter either 0x350 or 0x358 here. The card default is 0x350, if you + haven't changed the setting of jumper JP3 on the card. Removing the + jumper sets the card to 0x358. + +config RADIO_CADET + tristate "ADS Cadet AM/FM Tuner" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + help + Choose Y here if you have one of these AM/FM radio cards, and then + fill in the port address below. + + To compile this driver as a module, choose M here: the + module will be called radio-cadet. + +config RADIO_GEMTEK + tristate "GemTek Radio card (or compatible) support" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + select RADIO_ISA + help + Choose Y here if you have this FM radio card, and then fill in the + I/O port address and settings below. The following cards either have + GemTek Radio tuner or are rebranded GemTek Radio cards: + + - Sound Vision 16 Gold with FM Radio + - Typhoon Radio card (some models) + - Hama Radio card + + To compile this driver as a module, choose M here: the + module will be called radio-gemtek. + +config RADIO_GEMTEK_PORT + hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" + depends on RADIO_GEMTEK=y + default "34c" + help + Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The + card default is 0x34c, if you haven't changed the jumper setting + on the card. + + On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O + port is 0x20c, 0x248 or 0x28c. + + If automatic I/O port probing is enabled this port will be used only + in case of automatic probing failure, ie. as a fallback. + +config RADIO_GEMTEK_PROBE + bool "Automatic I/O port probing" + depends on RADIO_GEMTEK=y + default y + help + Say Y here to enable automatic probing for GemTek Radio card. The + following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and + 0x28c. + +config RADIO_ISA + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + tristate + +config RADIO_MIROPCM20 + tristate "miroSOUND PCM20 radio" + depends on ISA || COMPILE_TEST + depends on ISA_DMA_API && SND + select SND_ISA + select SND_MIRO + help + Choose Y here if you have this FM radio card. You also need to enable + the ALSA sound system. This choice automatically selects the ALSA + sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this + is required for the radio-miropcm20. + + To compile this driver as a module, choose M here: the + module will be called radio-miropcm20. + +config RADIO_RTRACK + tristate "AIMSlab RadioTrack (aka RadioReveal) support" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + select RADIO_ISA + help + Choose Y here if you have one of these FM radio cards, and then fill + in the port address below. + + Note that newer AIMSlab RadioTrack cards have a different chipset + and are not supported by this driver. For these cards, use the + RadioTrack II driver below. + + If you have a GemTeks combined (PnP) sound- and radio card you must + use this driver as a module and setup the card with isapnptools. + You must also pass the module a suitable io parameter, 0x248 has + been reported to be used by these cards. + + More information is contained in the file + <file:Documentation/driver-api/media/drivers/radiotrack.rst>. + + To compile this driver as a module, choose M here: the + module will be called radio-aimslab. + +config RADIO_RTRACK2 + tristate "AIMSlab RadioTrack II support" + depends on ISA || COMPILE_TEST + select RADIO_ISA + help + Choose Y here if you have this FM radio card, and then fill in the + port address below. + + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. + + To compile this driver as a module, choose M here: the + module will be called radio-rtrack2. + +config RADIO_RTRACK2_PORT + hex "RadioTrack II i/o port (0x20c or 0x30c)" + depends on RADIO_RTRACK2=y + default "30c" + help + Enter either 0x30c or 0x20c here. The card default is 0x30c, if you + haven't changed the jumper setting on the card. + +config RADIO_RTRACK_PORT + hex "RadioTrack i/o port (0x20f or 0x30f)" + depends on RADIO_RTRACK=y + default "30f" + help + Enter either 0x30f or 0x20f here. The card default is 0x30f, if you + haven't changed the jumper setting on the card. + +config RADIO_SF16FMI + tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + help + Choose Y here if you have one of these FM radio cards. + + To compile this driver as a module, choose M here: the + module will be called radio-sf16fmi. + +config RADIO_SF16FMR2 + tristate "SF16-FMR2/SF16-FMD2 Radio" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + select RADIO_TEA575X + help + Choose Y here if you have one of these FM radio cards. + + To compile this driver as a module, choose M here: the + module will be called radio-sf16fmr2. + +config RADIO_TERRATEC + tristate "TerraTec ActiveRadio ISA Standalone" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + select RADIO_ISA + help + Choose Y here if you have this FM radio card. + + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. + + To compile this driver as a module, choose M here: the + module will be called radio-terratec. + +config RADIO_TRUST + tristate "Trust FM radio card" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + select RADIO_ISA + help + This is a driver for the Trust FM radio cards. Say Y if you have + such a card and want to use it under Linux. + + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. + + To compile this driver as a module, choose M here: the + module will be called radio-trust. + +config RADIO_TRUST_PORT + hex "Trust i/o port (usually 0x350 or 0x358)" + depends on RADIO_TRUST=y + default "350" + help + Enter the I/O port of your Trust FM radio card. If unsure, try the + values "0x350" or "0x358". + +config RADIO_TYPHOON + tristate "Typhoon Radio (a.k.a. EcoRadio)" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + select RADIO_ISA + help + Choose Y here if you have one of these FM radio cards, and then fill + in the port address and the frequency used for muting below. + + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. + + To compile this driver as a module, choose M here: the + module will be called radio-typhoon. + +config RADIO_TYPHOON_MUTEFREQ + int "Typhoon frequency set when muting the device (kHz)" + depends on RADIO_TYPHOON=y + default "87500" + help + Enter the frequency used for muting the radio. The device is never + completely silent. If the volume is just turned down, you can still + hear silent voices and music. For that reason, the frequency of the + radio device is set to the frequency you can enter here whenever + the device is muted. There should be no local radio station at that + frequency. + +config RADIO_TYPHOON_PORT + hex "Typhoon I/O port (0x316 or 0x336)" + depends on RADIO_TYPHOON=y + default "316" + help + Enter the I/O port of your Typhoon or EcoRadio radio card. + +config RADIO_ZOLTRIX + tristate "Zoltrix Radio" + depends on ISA || COMPILE_TEST + depends on HAS_IOPORT + select RADIO_ISA + help + Choose Y here if you have one of these FM radio cards, and then fill + in the port address below. + + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. + + To compile this driver as a module, choose M here: the + module will be called radio-zoltrix. + +config RADIO_ZOLTRIX_PORT + hex "ZOLTRIX I/O port (0x20c or 0x30c)" + depends on RADIO_ZOLTRIX=y + default "20c" + help + Enter the I/O port of your Zoltrix radio card. + +endif # V4L_RADIO_ISA_DRIVERS + +endif # RADIO_ADAPTERS |