diff options
Diffstat (limited to 'drivers/media/radio/si4713/si4713.c')
| -rw-r--r-- | drivers/media/radio/si4713/si4713.c | 1665 |
1 files changed, 1665 insertions, 0 deletions
diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c new file mode 100644 index 0000000000..ddaf7a60b7 --- /dev/null +++ b/drivers/media/radio/si4713/si4713.c @@ -0,0 +1,1665 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * drivers/media/radio/si4713-i2c.c + * + * Silicon Labs Si4713 FM Radio Transmitter I2C commands. + * + * Copyright (c) 2009 Nokia Corporation + * Contact: Eduardo Valentin <eduardo.valentin@nokia.com> + */ + +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-common.h> + +#include "si4713.h" + +/* module parameters */ +static int debug; +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug level (0 - 2)"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>"); +MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter"); +MODULE_VERSION("0.0.1"); + +#define DEFAULT_RDS_PI 0x00 +#define DEFAULT_RDS_PTY 0x00 +#define DEFAULT_RDS_DEVIATION 0x00C8 +#define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003 +#define DEFAULT_LIMITER_RTIME 0x1392 +#define DEFAULT_LIMITER_DEV 0x102CA +#define DEFAULT_PILOT_FREQUENCY 0x4A38 +#define DEFAULT_PILOT_DEVIATION 0x1A5E +#define DEFAULT_ACOMP_ATIME 0x0000 +#define DEFAULT_ACOMP_RTIME 0xF4240L +#define DEFAULT_ACOMP_GAIN 0x0F +#define DEFAULT_ACOMP_THRESHOLD (-0x28) +#define DEFAULT_MUTE 0x01 +#define DEFAULT_POWER_LEVEL 88 +#define DEFAULT_FREQUENCY 8800 +#define DEFAULT_PREEMPHASIS FMPE_EU +#define DEFAULT_TUNE_RNL 0xFF + +#define to_si4713_device(sd) container_of(sd, struct si4713_device, sd) + +/* frequency domain transformation (using times 10 to avoid floats) */ +#define FREQDEV_UNIT 100000 +#define FREQV4L2_MULTI 625 +#define si4713_to_v4l2(f) ((f * FREQDEV_UNIT) / FREQV4L2_MULTI) +#define v4l2_to_si4713(f) ((f * FREQV4L2_MULTI) / FREQDEV_UNIT) +#define FREQ_RANGE_LOW 7600 +#define FREQ_RANGE_HIGH 10800 + +#define MAX_ARGS 7 + +#define RDS_BLOCK 8 +#define RDS_BLOCK_CLEAR 0x03 +#define RDS_BLOCK_LOAD 0x04 +#define RDS_RADIOTEXT_2A 0x20 +#define RDS_RADIOTEXT_BLK_SIZE 4 +#define RDS_RADIOTEXT_INDEX_MAX 0x0F +#define RDS_CARRIAGE_RETURN 0x0D + +#define rds_ps_nblocks(len) ((len / RDS_BLOCK) + (len % RDS_BLOCK ? 1 : 0)) + +#define get_status_bit(p, b, m) (((p) & (m)) >> (b)) +#define set_bits(p, v, b, m) (((p) & ~(m)) | ((v) << (b))) + +#define ATTACK_TIME_UNIT 500 + +#define POWER_OFF 0x00 +#define POWER_ON 0x01 + +#define msb(x) ((u8)((u16) x >> 8)) +#define lsb(x) ((u8)((u16) x & 0x00FF)) +#define compose_u16(msb, lsb) (((u16)msb << 8) | lsb) +#define check_command_failed(status) (!(status & SI4713_CTS) || \ + (status & SI4713_ERR)) +/* mute definition */ +#define set_mute(p) (((p) & 1) | (((p) & 1) << 1)) + +#ifdef DEBUG +#define DBG_BUFFER(device, message, buffer, size) \ + { \ + int i; \ + char str[(size)*5]; \ + for (i = 0; i < size; i++) \ + sprintf(str + i * 5, " 0x%02x", buffer[i]); \ + v4l2_dbg(2, debug, device, "%s:%s\n", message, str); \ + } +#else +#define DBG_BUFFER(device, message, buffer, size) +#endif + +/* + * Values for limiter release time (sorted by second column) + * device release + * value time (us) + */ +static long limiter_times[] = { + 2000, 250, + 1000, 500, + 510, 1000, + 255, 2000, + 170, 3000, + 127, 4020, + 102, 5010, + 85, 6020, + 73, 7010, + 64, 7990, + 57, 8970, + 51, 10030, + 25, 20470, + 17, 30110, + 13, 39380, + 10, 51190, + 8, 63690, + 7, 73140, + 6, 85330, + 5, 102390, +}; + +/* + * Values for audio compression release time (sorted by second column) + * device release + * value time (us) + */ +static unsigned long acomp_rtimes[] = { + 0, 100000, + 1, 200000, + 2, 350000, + 3, 525000, + 4, 1000000, +}; + +/* + * Values for preemphasis (sorted by second column) + * device preemphasis + * value value (v4l2) + */ +static unsigned long preemphasis_values[] = { + FMPE_DISABLED, V4L2_PREEMPHASIS_DISABLED, + FMPE_EU, V4L2_PREEMPHASIS_50_uS, + FMPE_USA, V4L2_PREEMPHASIS_75_uS, +}; + +static int usecs_to_dev(unsigned long usecs, unsigned long const array[], + int size) +{ + int i; + int rval = -EINVAL; + + for (i = 0; i < size / 2; i++) + if (array[(i * 2) + 1] >= usecs) { + rval = array[i * 2]; + break; + } + + return rval; +} + +/* si4713_handler: IRQ handler, just complete work */ +static irqreturn_t si4713_handler(int irq, void *dev) +{ + struct si4713_device *sdev = dev; + + v4l2_dbg(2, debug, &sdev->sd, + "%s: sending signal to completion work.\n", __func__); + complete(&sdev->work); + + return IRQ_HANDLED; +} + +/* + * si4713_send_command - sends a command to si4713 and waits its response + * @sdev: si4713_device structure for the device we are communicating + * @command: command id + * @args: command arguments we are sending (up to 7) + * @argn: actual size of @args + * @response: buffer to place the expected response from the device (up to 15) + * @respn: actual size of @response + * @usecs: amount of time to wait before reading the response (in usecs) + */ +static int si4713_send_command(struct si4713_device *sdev, const u8 command, + const u8 args[], const int argn, + u8 response[], const int respn, const int usecs) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd); + unsigned long until_jiffies; + u8 data1[MAX_ARGS + 1]; + int err; + + if (!client->adapter) + return -ENODEV; + + /* First send the command and its arguments */ + data1[0] = command; + memcpy(data1 + 1, args, argn); + DBG_BUFFER(&sdev->sd, "Parameters", data1, argn + 1); + + err = i2c_master_send(client, data1, argn + 1); + if (err != argn + 1) { + v4l2_err(&sdev->sd, "Error while sending command 0x%02x\n", + command); + return err < 0 ? err : -EIO; + } + + until_jiffies = jiffies + usecs_to_jiffies(usecs) + 1; + + /* Wait response from interrupt */ + if (client->irq) { + if (!wait_for_completion_timeout(&sdev->work, + usecs_to_jiffies(usecs) + 1)) + v4l2_warn(&sdev->sd, + "(%s) Device took too much time to answer.\n", + __func__); + } + + do { + err = i2c_master_recv(client, response, respn); + if (err != respn) { + v4l2_err(&sdev->sd, + "Error %d while reading response for command 0x%02x\n", + err, command); + return err < 0 ? err : -EIO; + } + + DBG_BUFFER(&sdev->sd, "Response", response, respn); + if (!check_command_failed(response[0])) + return 0; + + if (client->irq) + return -EBUSY; + if (usecs <= 1000) + usleep_range(usecs, 1000); + else + usleep_range(1000, 2000); + } while (time_is_after_jiffies(until_jiffies)); + + return -EBUSY; +} + +/* + * si4713_read_property - reads a si4713 property + * @sdev: si4713_device structure for the device we are communicating + * @prop: property identification number + * @pv: property value to be returned on success + */ +static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv) +{ + int err; + u8 val[SI4713_GET_PROP_NRESP]; + /* + * .First byte = 0 + * .Second byte = property's MSB + * .Third byte = property's LSB + */ + const u8 args[SI4713_GET_PROP_NARGS] = { + 0x00, + msb(prop), + lsb(prop), + }; + + err = si4713_send_command(sdev, SI4713_CMD_GET_PROPERTY, + args, ARRAY_SIZE(args), val, + ARRAY_SIZE(val), DEFAULT_TIMEOUT); + + if (err < 0) + return err; + + *pv = compose_u16(val[2], val[3]); + + v4l2_dbg(1, debug, &sdev->sd, + "%s: property=0x%02x value=0x%02x status=0x%02x\n", + __func__, prop, *pv, val[0]); + + return err; +} + +/* + * si4713_write_property - modifies a si4713 property + * @sdev: si4713_device structure for the device we are communicating + * @prop: property identification number + * @val: new value for that property + */ +static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val) +{ + int rval; + u8 resp[SI4713_SET_PROP_NRESP]; + /* + * .First byte = 0 + * .Second byte = property's MSB + * .Third byte = property's LSB + * .Fourth byte = value's MSB + * .Fifth byte = value's LSB + */ + const u8 args[SI4713_SET_PROP_NARGS] = { + 0x00, + msb(prop), + lsb(prop), + msb(val), + lsb(val), + }; + + rval = si4713_send_command(sdev, SI4713_CMD_SET_PROPERTY, + args, ARRAY_SIZE(args), + resp, ARRAY_SIZE(resp), + DEFAULT_TIMEOUT); + + if (rval < 0) + return rval; + + v4l2_dbg(1, debug, &sdev->sd, + "%s: property=0x%02x value=0x%02x status=0x%02x\n", + __func__, prop, val, resp[0]); + + /* + * As there is no command response for SET_PROPERTY, + * wait Tcomp time to finish before proceed, in order + * to have property properly set. + */ + msleep(TIMEOUT_SET_PROPERTY); + + return rval; +} + +/* + * si4713_powerup - Powers the device up + * @sdev: si4713_device structure for the device we are communicating + */ +static int si4713_powerup(struct si4713_device *sdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd); + int err; + u8 resp[SI4713_PWUP_NRESP]; + /* + * .First byte = Enabled interrupts and boot function + * .Second byte = Input operation mode + */ + u8 args[SI4713_PWUP_NARGS] = { + SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX, + SI4713_PWUP_OPMOD_ANALOG, + }; + + if (sdev->power_state) + return 0; + + if (sdev->vdd) { + err = regulator_enable(sdev->vdd); + if (err) { + v4l2_err(&sdev->sd, "Failed to enable vdd: %d\n", err); + return err; + } + } + + if (sdev->vio) { + err = regulator_enable(sdev->vio); + if (err) { + v4l2_err(&sdev->sd, "Failed to enable vio: %d\n", err); + return err; + } + } + + if (sdev->gpio_reset) { + udelay(50); + gpiod_set_value(sdev->gpio_reset, 1); + } + + if (client->irq) + args[0] |= SI4713_PWUP_CTSIEN; + + err = si4713_send_command(sdev, SI4713_CMD_POWER_UP, + args, ARRAY_SIZE(args), + resp, ARRAY_SIZE(resp), + TIMEOUT_POWER_UP); + + if (!err) { + v4l2_dbg(1, debug, &sdev->sd, "Powerup response: 0x%02x\n", + resp[0]); + v4l2_dbg(1, debug, &sdev->sd, "Device in power up mode\n"); + sdev->power_state = POWER_ON; + + if (client->irq) + err = si4713_write_property(sdev, SI4713_GPO_IEN, + SI4713_STC_INT | SI4713_CTS); + return err; + } + gpiod_set_value(sdev->gpio_reset, 0); + + + if (sdev->vdd) { + err = regulator_disable(sdev->vdd); + if (err) + v4l2_err(&sdev->sd, "Failed to disable vdd: %d\n", err); + } + + if (sdev->vio) { + err = regulator_disable(sdev->vio); + if (err) + v4l2_err(&sdev->sd, "Failed to disable vio: %d\n", err); + } + + return err; +} + +/* + * si4713_powerdown - Powers the device down + * @sdev: si4713_device structure for the device we are communicating + */ +static int si4713_powerdown(struct si4713_device *sdev) +{ + int err; + u8 resp[SI4713_PWDN_NRESP]; + + if (!sdev->power_state) + return 0; + + err = si4713_send_command(sdev, SI4713_CMD_POWER_DOWN, + NULL, 0, + resp, ARRAY_SIZE(resp), + DEFAULT_TIMEOUT); + + if (!err) { + v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n", + resp[0]); + v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n"); + if (sdev->gpio_reset) + gpiod_set_value(sdev->gpio_reset, 0); + + if (sdev->vdd) { + err = regulator_disable(sdev->vdd); + if (err) { + v4l2_err(&sdev->sd, + "Failed to disable vdd: %d\n", err); + } + } + + if (sdev->vio) { + err = regulator_disable(sdev->vio); + if (err) { + v4l2_err(&sdev->sd, + "Failed to disable vio: %d\n", err); + } + } + sdev->power_state = POWER_OFF; + } + + return err; +} + +/* + * si4713_checkrev - Checks if we are treating a device with the correct rev. + * @sdev: si4713_device structure for the device we are communicating + */ +static int si4713_checkrev(struct si4713_device *sdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd); + int rval; + u8 resp[SI4713_GETREV_NRESP]; + + rval = si4713_send_command(sdev, SI4713_CMD_GET_REV, + NULL, 0, + resp, ARRAY_SIZE(resp), + DEFAULT_TIMEOUT); + + if (rval < 0) + return rval; + + if (resp[1] == SI4713_PRODUCT_NUMBER) { + v4l2_info(&sdev->sd, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + } else { + v4l2_err(&sdev->sd, "Invalid product number 0x%X\n", resp[1]); + rval = -EINVAL; + } + return rval; +} + +/* + * si4713_wait_stc - Waits STC interrupt and clears status bits. Useful + * for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS + * @sdev: si4713_device structure for the device we are communicating + * @usecs: timeout to wait for STC interrupt signal + */ +static int si4713_wait_stc(struct si4713_device *sdev, const int usecs) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd); + u8 resp[SI4713_GET_STATUS_NRESP]; + unsigned long start_jiffies = jiffies; + int err; + + if (client->irq && + !wait_for_completion_timeout(&sdev->work, usecs_to_jiffies(usecs) + 1)) + v4l2_warn(&sdev->sd, + "(%s) Device took too much time to answer.\n", __func__); + + for (;;) { + /* Clear status bits */ + err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS, + NULL, 0, + resp, ARRAY_SIZE(resp), + DEFAULT_TIMEOUT); + /* The USB device returns errors when it waits for the + * STC bit to be set. Hence polling */ + if (err >= 0) { + v4l2_dbg(1, debug, &sdev->sd, + "%s: status bits: 0x%02x\n", __func__, resp[0]); + + if (resp[0] & SI4713_STC_INT) + return 0; + } + if (jiffies_to_usecs(jiffies - start_jiffies) > usecs) + return err < 0 ? err : -EIO; + /* We sleep here for 3-4 ms in order to avoid flooding the device + * with USB requests. The si4713 USB driver was developed + * by reverse engineering the Windows USB driver. The windows + * driver also has a ~2.5 ms delay between responses. */ + usleep_range(3000, 4000); + } +} + +/* + * si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning + * frequency between 76 and 108 MHz in 10 kHz units and + * steps of 50 kHz. + * @sdev: si4713_device structure for the device we are communicating + * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz) + */ +static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency) +{ + int err; + u8 val[SI4713_TXFREQ_NRESP]; + /* + * .First byte = 0 + * .Second byte = frequency's MSB + * .Third byte = frequency's LSB + */ + const u8 args[SI4713_TXFREQ_NARGS] = { + 0x00, + msb(frequency), + lsb(frequency), + }; + + err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_FREQ, + args, ARRAY_SIZE(args), val, + ARRAY_SIZE(val), DEFAULT_TIMEOUT); + + if (err < 0) + return err; + + v4l2_dbg(1, debug, &sdev->sd, + "%s: frequency=0x%02x status=0x%02x\n", __func__, + frequency, val[0]); + + err = si4713_wait_stc(sdev, TIMEOUT_TX_TUNE); + if (err < 0) + return err; + + return compose_u16(args[1], args[2]); +} + +/* + * si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in + * 1 dB units. A value of 0x00 indicates off. The command + * also sets the antenna tuning capacitance. A value of 0 + * indicates autotuning, and a value of 1 - 191 indicates + * a manual override, which results in a tuning + * capacitance of 0.25 pF x @antcap. + * @sdev: si4713_device structure for the device we are communicating + * @power: tuning power (88 - 120 dBuV, unit/step 1 dB) + * @antcap: value of antenna tuning capacitor (0 - 191) + */ +static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power, + u8 antcap) +{ + int err; + u8 val[SI4713_TXPWR_NRESP]; + /* + * .First byte = 0 + * .Second byte = 0 + * .Third byte = power + * .Fourth byte = antcap + */ + u8 args[SI4713_TXPWR_NARGS] = { + 0x00, + 0x00, + power, + antcap, + }; + + /* Map power values 1-87 to MIN_POWER (88) */ + if (power > 0 && power < SI4713_MIN_POWER) + args[2] = power = SI4713_MIN_POWER; + + err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER, + args, ARRAY_SIZE(args), val, + ARRAY_SIZE(val), DEFAULT_TIMEOUT); + + if (err < 0) + return err; + + v4l2_dbg(1, debug, &sdev->sd, + "%s: power=0x%02x antcap=0x%02x status=0x%02x\n", + __func__, power, antcap, val[0]); + + return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE_POWER); +} + +/* + * si4713_tx_tune_measure - Enters receive mode and measures the received noise + * level in units of dBuV on the selected frequency. + * The Frequency must be between 76 and 108 MHz in 10 kHz + * units and steps of 50 kHz. The command also sets the + * antenna tuning capacitance. A value of 0 means + * autotuning, and a value of 1 to 191 indicates manual + * override. + * @sdev: si4713_device structure for the device we are communicating + * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz) + * @antcap: value of antenna tuning capacitor (0 - 191) + */ +static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency, + u8 antcap) +{ + int err; + u8 val[SI4713_TXMEA_NRESP]; + /* + * .First byte = 0 + * .Second byte = frequency's MSB + * .Third byte = frequency's LSB + * .Fourth byte = antcap + */ + const u8 args[SI4713_TXMEA_NARGS] = { + 0x00, + msb(frequency), + lsb(frequency), + antcap, + }; + + sdev->tune_rnl = DEFAULT_TUNE_RNL; + + if (antcap > SI4713_MAX_ANTCAP) + return -EDOM; + + err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_MEASURE, + args, ARRAY_SIZE(args), val, + ARRAY_SIZE(val), DEFAULT_TIMEOUT); + + if (err < 0) + return err; + + v4l2_dbg(1, debug, &sdev->sd, + "%s: frequency=0x%02x antcap=0x%02x status=0x%02x\n", + __func__, frequency, antcap, val[0]); + + return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE); +} + +/* + * si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or + * tx_tune_power commands. This command return the current + * frequency, output voltage in dBuV, the antenna tunning + * capacitance value and the received noise level. The + * command also clears the stcint interrupt bit when the + * first bit of its arguments is high. + * @sdev: si4713_device structure for the device we are communicating + * @intack: 0x01 to clear the seek/tune complete interrupt status indicator. + * @frequency: returned frequency + * @power: returned power + * @antcap: returned antenna capacitance + * @noise: returned noise level + */ +static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack, + u16 *frequency, u8 *power, + u8 *antcap, u8 *noise) +{ + int err; + u8 val[SI4713_TXSTATUS_NRESP]; + /* + * .First byte = intack bit + */ + const u8 args[SI4713_TXSTATUS_NARGS] = { + intack & SI4713_INTACK_MASK, + }; + + err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_STATUS, + args, ARRAY_SIZE(args), val, + ARRAY_SIZE(val), DEFAULT_TIMEOUT); + + if (!err) { + v4l2_dbg(1, debug, &sdev->sd, + "%s: status=0x%02x\n", __func__, val[0]); + *frequency = compose_u16(val[2], val[3]); + sdev->frequency = *frequency; + *power = val[5]; + *antcap = val[6]; + *noise = val[7]; + v4l2_dbg(1, debug, &sdev->sd, + "%s: response: %d x 10 kHz (power %d, antcap %d, rnl %d)\n", + __func__, *frequency, *power, *antcap, *noise); + } + + return err; +} + +/* + * si4713_tx_rds_buff - Loads the RDS group buffer FIFO or circular buffer. + * @sdev: si4713_device structure for the device we are communicating + * @mode: the buffer operation mode. + * @rdsb: RDS Block B + * @rdsc: RDS Block C + * @rdsd: RDS Block D + * @cbleft: returns the number of available circular buffer blocks minus the + * number of used circular buffer blocks. + */ +static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb, + u16 rdsc, u16 rdsd, s8 *cbleft) +{ + int err; + u8 val[SI4713_RDSBUFF_NRESP]; + + const u8 args[SI4713_RDSBUFF_NARGS] = { + mode & SI4713_RDSBUFF_MODE_MASK, + msb(rdsb), + lsb(rdsb), + msb(rdsc), + lsb(rdsc), + msb(rdsd), + lsb(rdsd), + }; + + err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_BUFF, + args, ARRAY_SIZE(args), val, + ARRAY_SIZE(val), DEFAULT_TIMEOUT); + + if (!err) { + v4l2_dbg(1, debug, &sdev->sd, + "%s: status=0x%02x\n", __func__, val[0]); + *cbleft = (s8)val[2] - val[3]; + v4l2_dbg(1, debug, &sdev->sd, + "%s: response: interrupts 0x%02x cb avail: %d cb used %d fifo avail %d fifo used %d\n", + __func__, val[1], val[2], val[3], val[4], val[5]); + } + + return err; +} + +/* + * si4713_tx_rds_ps - Loads the program service buffer. + * @sdev: si4713_device structure for the device we are communicating + * @psid: program service id to be loaded. + * @pschar: assumed 4 size char array to be loaded into the program service + */ +static int si4713_tx_rds_ps(struct si4713_device *sdev, u8 psid, + unsigned char *pschar) +{ + int err; + u8 val[SI4713_RDSPS_NRESP]; + + const u8 args[SI4713_RDSPS_NARGS] = { + psid & SI4713_RDSPS_PSID_MASK, + pschar[0], + pschar[1], + pschar[2], + pschar[3], + }; + + err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_PS, + args, ARRAY_SIZE(args), val, + ARRAY_SIZE(val), DEFAULT_TIMEOUT); + + if (err < 0) + return err; + + v4l2_dbg(1, debug, &sdev->sd, "%s: status=0x%02x\n", __func__, val[0]); + + return err; +} + +static int si4713_set_power_state(struct si4713_device *sdev, u8 value) +{ + if (value) + return si4713_powerup(sdev); + return si4713_powerdown(sdev); +} + +static int si4713_set_mute(struct si4713_device *sdev, u16 mute) +{ + int rval = 0; + + mute = set_mute(mute); + + if (sdev->power_state) + rval = si4713_write_property(sdev, + SI4713_TX_LINE_INPUT_MUTE, mute); + + return rval; +} + +static int si4713_set_rds_ps_name(struct si4713_device *sdev, char *ps_name) +{ + int rval = 0, i; + u8 len = 0; + + /* We want to clear the whole thing */ + if (!strlen(ps_name)) + memset(ps_name, 0, MAX_RDS_PS_NAME + 1); + + if (sdev->power_state) { + /* Write the new ps name and clear the padding */ + for (i = 0; i < MAX_RDS_PS_NAME; i += (RDS_BLOCK / 2)) { + rval = si4713_tx_rds_ps(sdev, (i / (RDS_BLOCK / 2)), + ps_name + i); + if (rval < 0) + return rval; + } + + /* Setup the size to be sent */ + if (strlen(ps_name)) + len = strlen(ps_name) - 1; + else + len = 1; + + rval = si4713_write_property(sdev, + SI4713_TX_RDS_PS_MESSAGE_COUNT, + rds_ps_nblocks(len)); + if (rval < 0) + return rval; + + rval = si4713_write_property(sdev, + SI4713_TX_RDS_PS_REPEAT_COUNT, + DEFAULT_RDS_PS_REPEAT_COUNT * 2); + if (rval < 0) + return rval; + } + + return rval; +} + +static int si4713_set_rds_radio_text(struct si4713_device *sdev, const char *rt) +{ + static const char cr[RDS_RADIOTEXT_BLK_SIZE] = { RDS_CARRIAGE_RETURN, 0 }; + int rval = 0, i; + u16 t_index = 0; + u8 b_index = 0, cr_inserted = 0; + s8 left; + + if (!sdev->power_state) + return rval; + + rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_CLEAR, 0, 0, 0, &left); + if (rval < 0) + return rval; + + if (!strlen(rt)) + return rval; + + do { + /* RDS spec says that if the last block isn't used, + * then apply a carriage return + */ + if (t_index < (RDS_RADIOTEXT_INDEX_MAX * RDS_RADIOTEXT_BLK_SIZE)) { + for (i = 0; i < RDS_RADIOTEXT_BLK_SIZE; i++) { + if (!rt[t_index + i] || + rt[t_index + i] == RDS_CARRIAGE_RETURN) { + rt = cr; + cr_inserted = 1; + break; + } + } + } + + rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_LOAD, + compose_u16(RDS_RADIOTEXT_2A, b_index++), + compose_u16(rt[t_index], rt[t_index + 1]), + compose_u16(rt[t_index + 2], rt[t_index + 3]), + &left); + if (rval < 0) + return rval; + + t_index += RDS_RADIOTEXT_BLK_SIZE; + + if (cr_inserted) + break; + } while (left > 0); + + return rval; +} + +/* + * si4713_update_tune_status - update properties from tx_tune_status + * command. Must be called with sdev->mutex held. + * @sdev: si4713_device structure for the device we are communicating + */ +static int si4713_update_tune_status(struct si4713_device *sdev) +{ + int rval; + u16 f = 0; + u8 p = 0, a = 0, n = 0; + + rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n); + + if (rval < 0) + goto exit; + +/* TODO: check that power_level and antenna_capacitor really are not + changed by the hardware. If they are, then these controls should become + volatiles. + sdev->power_level = p; + sdev->antenna_capacitor = a;*/ + sdev->tune_rnl = n; + +exit: + return rval; +} + +static int si4713_choose_econtrol_action(struct si4713_device *sdev, u32 id, + s32 *bit, s32 *mask, u16 *property, int *mul, + unsigned long **table, int *size) +{ + s32 rval = 0; + + switch (id) { + /* FM_TX class controls */ + case V4L2_CID_RDS_TX_PI: + *property = SI4713_TX_RDS_PI; + *mul = 1; + break; + case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD: + *property = SI4713_TX_ACOMP_THRESHOLD; + *mul = 1; + break; + case V4L2_CID_AUDIO_COMPRESSION_GAIN: + *property = SI4713_TX_ACOMP_GAIN; + *mul = 1; + break; + case V4L2_CID_PILOT_TONE_FREQUENCY: + *property = SI4713_TX_PILOT_FREQUENCY; + *mul = 1; + break; + case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME: + *property = SI4713_TX_ACOMP_ATTACK_TIME; + *mul = ATTACK_TIME_UNIT; + break; + case V4L2_CID_PILOT_TONE_DEVIATION: + *property = SI4713_TX_PILOT_DEVIATION; + *mul = 10; + break; + case V4L2_CID_AUDIO_LIMITER_DEVIATION: + *property = SI4713_TX_AUDIO_DEVIATION; + *mul = 10; + break; + case V4L2_CID_RDS_TX_DEVIATION: + *property = SI4713_TX_RDS_DEVIATION; + *mul = 1; + break; + + case V4L2_CID_RDS_TX_PTY: + *property = SI4713_TX_RDS_PS_MISC; + *bit = 5; + *mask = 0x1F << 5; + break; + case V4L2_CID_RDS_TX_DYNAMIC_PTY: + *property = SI4713_TX_RDS_PS_MISC; + *bit = 15; + *mask = 1 << 15; + break; + case V4L2_CID_RDS_TX_COMPRESSED: + *property = SI4713_TX_RDS_PS_MISC; + *bit = 14; + *mask = 1 << 14; + break; + case V4L2_CID_RDS_TX_ARTIFICIAL_HEAD: + *property = SI4713_TX_RDS_PS_MISC; + *bit = 13; + *mask = 1 << 13; + break; + case V4L2_CID_RDS_TX_MONO_STEREO: + *property = SI4713_TX_RDS_PS_MISC; + *bit = 12; + *mask = 1 << 12; + break; + case V4L2_CID_RDS_TX_TRAFFIC_PROGRAM: + *property = SI4713_TX_RDS_PS_MISC; + *bit = 10; + *mask = 1 << 10; + break; + case V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT: + *property = SI4713_TX_RDS_PS_MISC; + *bit = 4; + *mask = 1 << 4; + break; + case V4L2_CID_RDS_TX_MUSIC_SPEECH: + *property = SI4713_TX_RDS_PS_MISC; + *bit = 3; + *mask = 1 << 3; + break; + case V4L2_CID_AUDIO_LIMITER_ENABLED: + *property = SI4713_TX_ACOMP_ENABLE; + *bit = 1; + *mask = 1 << 1; + break; + case V4L2_CID_AUDIO_COMPRESSION_ENABLED: + *property = SI4713_TX_ACOMP_ENABLE; + *bit = 0; + *mask = 1 << 0; + break; + case V4L2_CID_PILOT_TONE_ENABLED: + *property = SI4713_TX_COMPONENT_ENABLE; + *bit = 0; + *mask = 1 << 0; + break; + + case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME: + *property = SI4713_TX_LIMITER_RELEASE_TIME; + *table = limiter_times; + *size = ARRAY_SIZE(limiter_times); + break; + case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME: + *property = SI4713_TX_ACOMP_RELEASE_TIME; + *table = acomp_rtimes; + *size = ARRAY_SIZE(acomp_rtimes); + break; + case V4L2_CID_TUNE_PREEMPHASIS: + *property = SI4713_TX_PREEMPHASIS; + *table = preemphasis_values; + *size = ARRAY_SIZE(preemphasis_values); + break; + + default: + rval = -EINVAL; + break; + } + + return rval; +} + +static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f); +static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *); +/* + * si4713_setup - Sets the device up with current configuration. + * @sdev: si4713_device structure for the device we are communicating + */ +static int si4713_setup(struct si4713_device *sdev) +{ + struct v4l2_frequency f; + struct v4l2_modulator vm; + int rval; + + /* Device procedure needs to set frequency first */ + f.tuner = 0; + f.frequency = sdev->frequency ? sdev->frequency : DEFAULT_FREQUENCY; + f.frequency = si4713_to_v4l2(f.frequency); + rval = si4713_s_frequency(&sdev->sd, &f); + + vm.index = 0; + if (sdev->stereo) + vm.txsubchans = V4L2_TUNER_SUB_STEREO; + else + vm.txsubchans = V4L2_TUNER_SUB_MONO; + if (sdev->rds_enabled) + vm.txsubchans |= V4L2_TUNER_SUB_RDS; + si4713_s_modulator(&sdev->sd, &vm); + + return rval; +} + +/* + * si4713_initialize - Sets the device up with default configuration. + * @sdev: si4713_device structure for the device we are communicating + */ +static int si4713_initialize(struct si4713_device *sdev) +{ + int rval; + + rval = si4713_set_power_state(sdev, POWER_ON); + if (rval < 0) + return rval; + + rval = si4713_checkrev(sdev); + if (rval < 0) + return rval; + + rval = si4713_set_power_state(sdev, POWER_OFF); + if (rval < 0) + return rval; + + sdev->frequency = DEFAULT_FREQUENCY; + sdev->stereo = 1; + sdev->tune_rnl = DEFAULT_TUNE_RNL; + return 0; +} + +/* si4713_s_ctrl - set the value of a control */ +static int si4713_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct si4713_device *sdev = + container_of(ctrl->handler, struct si4713_device, ctrl_handler); + u32 val = 0; + s32 bit = 0, mask = 0; + u16 property = 0; + int mul = 0; + unsigned long *table = NULL; + int size = 0; + bool force = false; + int c; + int ret = 0; + + if (ctrl->id != V4L2_CID_AUDIO_MUTE) + return -EINVAL; + if (ctrl->is_new) { + if (ctrl->val) { + ret = si4713_set_mute(sdev, ctrl->val); + if (!ret) + ret = si4713_set_power_state(sdev, POWER_DOWN); + return ret; + } + ret = si4713_set_power_state(sdev, POWER_UP); + if (!ret) + ret = si4713_set_mute(sdev, ctrl->val); + if (!ret) + ret = si4713_setup(sdev); + if (ret) + return ret; + force = true; + } + + if (!sdev->power_state) + return 0; + + for (c = 1; !ret && c < ctrl->ncontrols; c++) { + ctrl = ctrl->cluster[c]; + + if (!force && !ctrl->is_new) + continue; + + switch (ctrl->id) { + case V4L2_CID_RDS_TX_PS_NAME: + ret = si4713_set_rds_ps_name(sdev, ctrl->p_new.p_char); + break; + + case V4L2_CID_RDS_TX_RADIO_TEXT: + ret = si4713_set_rds_radio_text(sdev, ctrl->p_new.p_char); + break; + + case V4L2_CID_TUNE_ANTENNA_CAPACITOR: + /* don't handle this control if we force setting all + * controls since in that case it will be handled by + * V4L2_CID_TUNE_POWER_LEVEL. */ + if (force) + break; + fallthrough; + case V4L2_CID_TUNE_POWER_LEVEL: + ret = si4713_tx_tune_power(sdev, + sdev->tune_pwr_level->val, sdev->tune_ant_cap->val); + if (!ret) { + /* Make sure we don't set this twice */ + sdev->tune_ant_cap->is_new = false; + sdev->tune_pwr_level->is_new = false; + } + break; + + case V4L2_CID_RDS_TX_ALT_FREQS_ENABLE: + case V4L2_CID_RDS_TX_ALT_FREQS: + if (sdev->rds_alt_freqs_enable->val) { + val = sdev->rds_alt_freqs->p_new.p_u32[0]; + val = val / 100 - 876 + 0xe101; + } else { + val = 0xe0e0; + } + ret = si4713_write_property(sdev, SI4713_TX_RDS_PS_AF, val); + break; + + default: + ret = si4713_choose_econtrol_action(sdev, ctrl->id, &bit, + &mask, &property, &mul, &table, &size); + if (ret < 0) + break; + + val = ctrl->val; + if (mul) { + val = val / mul; + } else if (table) { + ret = usecs_to_dev(val, table, size); + if (ret < 0) + break; + val = ret; + ret = 0; + } + + if (mask) { + ret = si4713_read_property(sdev, property, &val); + if (ret < 0) + break; + val = set_bits(val, ctrl->val, bit, mask); + } + + ret = si4713_write_property(sdev, property, val); + if (ret < 0) + break; + if (mask) + val = ctrl->val; + break; + } + } + + return ret; +} + +/* si4713_ioctl - deal with private ioctls (only rnl for now) */ +static long si4713_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct si4713_device *sdev = to_si4713_device(sd); + struct si4713_rnl *rnl = arg; + u16 frequency; + int rval = 0; + + if (!arg) + return -EINVAL; + + switch (cmd) { + case SI4713_IOC_MEASURE_RNL: + frequency = v4l2_to_si4713(rnl->frequency); + + if (sdev->power_state) { + /* Set desired measurement frequency */ + rval = si4713_tx_tune_measure(sdev, frequency, 0); + if (rval < 0) + return rval; + /* get results from tune status */ + rval = si4713_update_tune_status(sdev); + if (rval < 0) + return rval; + } + rnl->rnl = sdev->tune_rnl; + break; + + default: + /* nothing */ + rval = -ENOIOCTLCMD; + } + + return rval; +} + +/* si4713_g_modulator - get modulator attributes */ +static int si4713_g_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *vm) +{ + struct si4713_device *sdev = to_si4713_device(sd); + int rval = 0; + + if (!sdev) + return -ENODEV; + + if (vm->index > 0) + return -EINVAL; + + strscpy(vm->name, "FM Modulator", sizeof(vm->name)); + vm->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW | + V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_CONTROLS; + + /* Report current frequency range limits */ + vm->rangelow = si4713_to_v4l2(FREQ_RANGE_LOW); + vm->rangehigh = si4713_to_v4l2(FREQ_RANGE_HIGH); + + if (sdev->power_state) { + u32 comp_en = 0; + + rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE, + &comp_en); + if (rval < 0) + return rval; + + sdev->stereo = get_status_bit(comp_en, 1, 1 << 1); + } + + /* Report current audio mode: mono or stereo */ + if (sdev->stereo) + vm->txsubchans = V4L2_TUNER_SUB_STEREO; + else + vm->txsubchans = V4L2_TUNER_SUB_MONO; + + /* Report rds feature status */ + if (sdev->rds_enabled) + vm->txsubchans |= V4L2_TUNER_SUB_RDS; + else + vm->txsubchans &= ~V4L2_TUNER_SUB_RDS; + + return rval; +} + +/* si4713_s_modulator - set modulator attributes */ +static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *vm) +{ + struct si4713_device *sdev = to_si4713_device(sd); + int rval = 0; + u16 stereo, rds; + u32 p; + + if (!sdev) + return -ENODEV; + + if (vm->index > 0) + return -EINVAL; + + /* Set audio mode: mono or stereo */ + if (vm->txsubchans & V4L2_TUNER_SUB_STEREO) + stereo = 1; + else if (vm->txsubchans & V4L2_TUNER_SUB_MONO) + stereo = 0; + else + return -EINVAL; + + rds = !!(vm->txsubchans & V4L2_TUNER_SUB_RDS); + + if (sdev->power_state) { + rval = si4713_read_property(sdev, + SI4713_TX_COMPONENT_ENABLE, &p); + if (rval < 0) + return rval; + + p = set_bits(p, stereo, 1, 1 << 1); + p = set_bits(p, rds, 2, 1 << 2); + + rval = si4713_write_property(sdev, + SI4713_TX_COMPONENT_ENABLE, p); + if (rval < 0) + return rval; + } + + sdev->stereo = stereo; + sdev->rds_enabled = rds; + + return rval; +} + +/* si4713_g_frequency - get tuner or modulator radio frequency */ +static int si4713_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) +{ + struct si4713_device *sdev = to_si4713_device(sd); + int rval = 0; + + if (f->tuner) + return -EINVAL; + + if (sdev->power_state) { + u16 freq; + u8 p, a, n; + + rval = si4713_tx_tune_status(sdev, 0x00, &freq, &p, &a, &n); + if (rval < 0) + return rval; + + sdev->frequency = freq; + } + + f->frequency = si4713_to_v4l2(sdev->frequency); + + return rval; +} + +/* si4713_s_frequency - set tuner or modulator radio frequency */ +static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f) +{ + struct si4713_device *sdev = to_si4713_device(sd); + int rval = 0; + u16 frequency = v4l2_to_si4713(f->frequency); + + if (f->tuner) + return -EINVAL; + + /* Check frequency range */ + frequency = clamp_t(u16, frequency, FREQ_RANGE_LOW, FREQ_RANGE_HIGH); + + if (sdev->power_state) { + rval = si4713_tx_tune_freq(sdev, frequency); + if (rval < 0) + return rval; + frequency = rval; + rval = 0; + } + sdev->frequency = frequency; + + return rval; +} + +static const struct v4l2_ctrl_ops si4713_ctrl_ops = { + .s_ctrl = si4713_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops si4713_subdev_core_ops = { + .ioctl = si4713_ioctl, +}; + +static const struct v4l2_subdev_tuner_ops si4713_subdev_tuner_ops = { + .g_frequency = si4713_g_frequency, + .s_frequency = si4713_s_frequency, + .g_modulator = si4713_g_modulator, + .s_modulator = si4713_s_modulator, +}; + +static const struct v4l2_subdev_ops si4713_subdev_ops = { + .core = &si4713_subdev_core_ops, + .tuner = &si4713_subdev_tuner_ops, +}; + +static const struct v4l2_ctrl_config si4713_alt_freqs_ctrl = { + .id = V4L2_CID_RDS_TX_ALT_FREQS, + .type = V4L2_CTRL_TYPE_U32, + .min = 87600, + .max = 107900, + .step = 100, + .def = 87600, + .dims = { 1 }, + .elem_size = sizeof(u32), +}; + +/* + * I2C driver interface + */ +/* si4713_probe - probe for the device */ +static int si4713_probe(struct i2c_client *client) +{ + struct si4713_device *sdev; + struct v4l2_ctrl_handler *hdl; + struct si4713_platform_data *pdata = client->dev.platform_data; + struct device_node *np = client->dev.of_node; + struct radio_si4713_platform_data si4713_pdev_pdata; + struct platform_device *si4713_pdev; + int rval; + + sdev = devm_kzalloc(&client->dev, sizeof(*sdev), GFP_KERNEL); + if (!sdev) { + dev_err(&client->dev, "Failed to alloc video device.\n"); + rval = -ENOMEM; + goto exit; + } + + sdev->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(sdev->gpio_reset)) { + rval = PTR_ERR(sdev->gpio_reset); + dev_err(&client->dev, "Failed to request gpio: %d\n", rval); + goto exit; + } + + sdev->vdd = devm_regulator_get_optional(&client->dev, "vdd"); + if (IS_ERR(sdev->vdd)) { + rval = PTR_ERR(sdev->vdd); + if (rval == -EPROBE_DEFER) + goto exit; + + dev_dbg(&client->dev, "no vdd regulator found: %d\n", rval); + sdev->vdd = NULL; + } + + sdev->vio = devm_regulator_get_optional(&client->dev, "vio"); + if (IS_ERR(sdev->vio)) { + rval = PTR_ERR(sdev->vio); + if (rval == -EPROBE_DEFER) + goto exit; + + dev_dbg(&client->dev, "no vio regulator found: %d\n", rval); + sdev->vio = NULL; + } + + v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops); + + init_completion(&sdev->work); + + hdl = &sdev->ctrl_handler; + v4l2_ctrl_handler_init(hdl, 20); + sdev->mute = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, DEFAULT_MUTE); + + sdev->rds_pi = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_PI, 0, 0xffff, 1, DEFAULT_RDS_PI); + sdev->rds_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_PTY, 0, 31, 1, DEFAULT_RDS_PTY); + sdev->rds_compressed = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_COMPRESSED, 0, 1, 1, 0); + sdev->rds_art_head = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_ARTIFICIAL_HEAD, 0, 1, 1, 0); + sdev->rds_stereo = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_MONO_STEREO, 0, 1, 1, 1); + sdev->rds_tp = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_TRAFFIC_PROGRAM, 0, 1, 1, 0); + sdev->rds_ta = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0); + sdev->rds_ms = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_MUSIC_SPEECH, 0, 1, 1, 1); + sdev->rds_dyn_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_DYNAMIC_PTY, 0, 1, 1, 0); + sdev->rds_alt_freqs_enable = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_ALT_FREQS_ENABLE, 0, 1, 1, 0); + sdev->rds_alt_freqs = v4l2_ctrl_new_custom(hdl, &si4713_alt_freqs_ctrl, NULL); + sdev->rds_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_DEVIATION, 0, MAX_RDS_DEVIATION, + 10, DEFAULT_RDS_DEVIATION); + /* + * Report step as 8. From RDS spec, psname + * should be 8. But there are receivers which scroll strings + * sized as 8xN. + */ + sdev->rds_ps_name = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_PS_NAME, 0, MAX_RDS_PS_NAME, 8, 0); + /* + * Report step as 32 (2A block). From RDS spec, + * radio text should be 32 for 2A block. But there are receivers + * which scroll strings sized as 32xN. Setting default to 32. + */ + sdev->rds_radio_text = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_RDS_TX_RADIO_TEXT, 0, MAX_RDS_RADIO_TEXT, 32, 0); + + sdev->limiter_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_AUDIO_LIMITER_ENABLED, 0, 1, 1, 1); + sdev->limiter_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_AUDIO_LIMITER_RELEASE_TIME, 250, + MAX_LIMITER_RELEASE_TIME, 10, DEFAULT_LIMITER_RTIME); + sdev->limiter_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_AUDIO_LIMITER_DEVIATION, 0, + MAX_LIMITER_DEVIATION, 10, DEFAULT_LIMITER_DEV); + + sdev->compression_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_AUDIO_COMPRESSION_ENABLED, 0, 1, 1, 1); + sdev->compression_gain = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1, + DEFAULT_ACOMP_GAIN); + sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, + MIN_ACOMP_THRESHOLD, MAX_ACOMP_THRESHOLD, 1, + DEFAULT_ACOMP_THRESHOLD); + sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0, + MAX_ACOMP_ATTACK_TIME, 500, DEFAULT_ACOMP_ATIME); + sdev->compression_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME, 100000, + MAX_ACOMP_RELEASE_TIME, 100000, DEFAULT_ACOMP_RTIME); + + sdev->pilot_tone_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_PILOT_TONE_ENABLED, 0, 1, 1, 1); + sdev->pilot_tone_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_PILOT_TONE_DEVIATION, 0, MAX_PILOT_DEVIATION, + 10, DEFAULT_PILOT_DEVIATION); + sdev->pilot_tone_freq = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_PILOT_TONE_FREQUENCY, 0, MAX_PILOT_FREQUENCY, + 1, DEFAULT_PILOT_FREQUENCY); + + sdev->tune_preemphasis = v4l2_ctrl_new_std_menu(hdl, &si4713_ctrl_ops, + V4L2_CID_TUNE_PREEMPHASIS, + V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS); + sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER, + 1, DEFAULT_POWER_LEVEL); + sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops, + V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP, + 1, 0); + + if (hdl->error) { + rval = hdl->error; + goto free_ctrls; + } + v4l2_ctrl_cluster(29, &sdev->mute); + sdev->sd.ctrl_handler = hdl; + + if (client->irq) { + rval = devm_request_irq(&client->dev, client->irq, + si4713_handler, IRQF_TRIGGER_FALLING, + client->name, sdev); + if (rval < 0) { + v4l2_err(&sdev->sd, "Could not request IRQ\n"); + goto free_ctrls; + } + v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n"); + } else { + v4l2_warn(&sdev->sd, "IRQ not configured. Using timeouts.\n"); + } + + rval = si4713_initialize(sdev); + if (rval < 0) { + v4l2_err(&sdev->sd, "Failed to probe device information.\n"); + goto free_ctrls; + } + + if (!np && (!pdata || !pdata->is_platform_device)) + return 0; + + si4713_pdev = platform_device_alloc("radio-si4713", -1); + if (!si4713_pdev) { + rval = -ENOMEM; + goto put_main_pdev; + } + + si4713_pdev_pdata.subdev = client; + rval = platform_device_add_data(si4713_pdev, &si4713_pdev_pdata, + sizeof(si4713_pdev_pdata)); + if (rval) + goto put_main_pdev; + + rval = platform_device_add(si4713_pdev); + if (rval) + goto put_main_pdev; + + sdev->pd = si4713_pdev; + + return 0; + +put_main_pdev: + platform_device_put(si4713_pdev); + v4l2_device_unregister_subdev(&sdev->sd); +free_ctrls: + v4l2_ctrl_handler_free(hdl); +exit: + return rval; +} + +/* si4713_remove - remove the device */ +static void si4713_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct si4713_device *sdev = to_si4713_device(sd); + + platform_device_unregister(sdev->pd); + + if (sdev->power_state) + si4713_set_power_state(sdev, POWER_DOWN); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); +} + +/* si4713_i2c_driver - i2c driver interface */ +static const struct i2c_device_id si4713_id[] = { + { "si4713" , 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, si4713_id); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id si4713_of_match[] = { + { .compatible = "silabs,si4713" }, + { }, +}; +MODULE_DEVICE_TABLE(of, si4713_of_match); +#endif + +static struct i2c_driver si4713_i2c_driver = { + .driver = { + .name = "si4713", + .of_match_table = of_match_ptr(si4713_of_match), + }, + .probe = si4713_probe, + .remove = si4713_remove, + .id_table = si4713_id, +}; + +module_i2c_driver(si4713_i2c_driver); |