summaryrefslogtreecommitdiffstats
path: root/drivers/media/rc/fintek-cir.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/rc/fintek-cir.h')
-rw-r--r--drivers/media/rc/fintek-cir.h231
1 files changed, 231 insertions, 0 deletions
diff --git a/drivers/media/rc/fintek-cir.h b/drivers/media/rc/fintek-cir.h
new file mode 100644
index 0000000000..20696359e9
--- /dev/null
+++ b/drivers/media/rc/fintek-cir.h
@@ -0,0 +1,231 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
+ *
+ * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
+ *
+ * Special thanks to Fintek for providing hardware and spec sheets.
+ * This driver is based upon the nuvoton, ite and ene drivers for
+ * similar hardware.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/ioctl.h>
+
+/* platform driver name to register */
+#define FINTEK_DRIVER_NAME "fintek-cir"
+#define FINTEK_DESCRIPTION "Fintek LPC SuperIO Consumer IR Transceiver"
+#define VENDOR_ID_FINTEK 0x1934
+
+
+/* debugging module parameter */
+static int debug;
+
+#define fit_pr(level, text, ...) \
+ printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+
+#define fit_dbg(text, ...) \
+ if (debug) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define fit_dbg_verbose(text, ...) \
+ if (debug > 1) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define fit_dbg_wake(text, ...) \
+ if (debug > 2) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+
+#define TX_BUF_LEN 256
+#define RX_BUF_LEN 32
+
+struct fintek_dev {
+ struct pnp_dev *pdev;
+ struct rc_dev *rdev;
+
+ spinlock_t fintek_lock;
+
+ /* for rx */
+ u8 buf[RX_BUF_LEN];
+ unsigned int pkts;
+
+ struct {
+ spinlock_t lock;
+ u8 buf[TX_BUF_LEN];
+ unsigned int buf_count;
+ unsigned int cur_buf_num;
+ wait_queue_head_t queue;
+ } tx;
+
+ /* Config register index/data port pair */
+ u32 cr_ip;
+ u32 cr_dp;
+
+ /* hardware I/O settings */
+ unsigned long cir_addr;
+ int cir_irq;
+ int cir_port_len;
+
+ /* hardware id */
+ u8 chip_major;
+ u8 chip_minor;
+ u16 chip_vendor;
+ u8 logical_dev_cir;
+
+ /* hardware features */
+ bool hw_learning_capable;
+ bool hw_tx_capable;
+
+ /* rx settings */
+ bool learning_enabled;
+ bool carrier_detect_enabled;
+
+ enum {
+ CMD_HEADER = 0,
+ SUBCMD,
+ CMD_DATA,
+ PARSE_IRDATA,
+ } parser_state;
+
+ u8 cmd, rem;
+
+ /* carrier period = 1 / frequency */
+ u32 carrier;
+};
+
+/* buffer packet constants, largely identical to mceusb.c */
+#define BUF_PULSE_BIT 0x80
+#define BUF_LEN_MASK 0x1f
+#define BUF_SAMPLE_MASK 0x7f
+
+#define BUF_COMMAND_HEADER 0x9f
+#define BUF_COMMAND_MASK 0xe0
+#define BUF_COMMAND_NULL 0x00
+#define BUF_HW_CMD_HEADER 0xff
+#define BUF_CMD_G_REVISION 0x0b
+#define BUF_CMD_S_CARRIER 0x06
+#define BUF_CMD_S_TIMEOUT 0x0c
+#define BUF_CMD_SIG_END 0x01
+#define BUF_CMD_S_TXMASK 0x08
+#define BUF_CMD_S_RXSENSOR 0x14
+#define BUF_RSP_PULSE_COUNT 0x15
+
+#define CIR_SAMPLE_PERIOD 50
+
+/*
+ * Configuration Register:
+ * Index Port
+ * Data Port
+ */
+#define CR_INDEX_PORT 0x2e
+#define CR_DATA_PORT 0x2f
+
+/* Possible alternate values, depends on how the chip is wired */
+#define CR_INDEX_PORT2 0x4e
+#define CR_DATA_PORT2 0x4f
+
+/*
+ * GCR_CONFIG_PORT_SEL bit 4 specifies which Index Port value is
+ * active. 1 = 0x4e, 0 = 0x2e
+ */
+#define PORT_SEL_PORT_4E_EN 0x10
+
+/* Extended Function Mode enable/disable magic values */
+#define CONFIG_REG_ENABLE 0x87
+#define CONFIG_REG_DISABLE 0xaa
+
+/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
+#define CHIP_ID_HIGH_F71809U 0x04
+#define CHIP_ID_LOW_F71809U 0x08
+
+/*
+ * Global control regs we need to care about:
+ * Global Control def.
+ * Register name addr val. */
+#define GCR_SOFTWARE_RESET 0x02 /* 0x00 */
+#define GCR_LOGICAL_DEV_NO 0x07 /* 0x00 */
+#define GCR_CHIP_ID_HI 0x20 /* 0x04 */
+#define GCR_CHIP_ID_LO 0x21 /* 0x08 */
+#define GCR_VENDOR_ID_HI 0x23 /* 0x19 */
+#define GCR_VENDOR_ID_LO 0x24 /* 0x34 */
+#define GCR_CONFIG_PORT_SEL 0x25 /* 0x01 */
+#define GCR_KBMOUSE_WAKEUP 0x27
+
+#define LOGICAL_DEV_DISABLE 0x00
+#define LOGICAL_DEV_ENABLE 0x01
+
+/* Logical device number of the CIR function */
+#define LOGICAL_DEV_CIR_REV1 0x05
+#define LOGICAL_DEV_CIR_REV2 0x08
+
+/* CIR Logical Device (LDN 0x08) config registers */
+#define CIR_CR_COMMAND_INDEX 0x04
+#define CIR_CR_IRCS 0x05 /* Before host writes command to IR, host
+ must set to 1. When host finshes write
+ command to IR, host must clear to 0. */
+#define CIR_CR_COMMAND_DATA 0x06 /* Host read or write command data */
+#define CIR_CR_CLASS 0x07 /* 0xff = rx-only, 0x66 = rx + 2 tx,
+ 0x33 = rx + 1 tx */
+#define CIR_CR_DEV_EN 0x30 /* bit0 = 1 enables CIR */
+#define CIR_CR_BASE_ADDR_HI 0x60 /* MSB of CIR IO base addr */
+#define CIR_CR_BASE_ADDR_LO 0x61 /* LSB of CIR IO base addr */
+#define CIR_CR_IRQ_SEL 0x70 /* bits3-0 store CIR IRQ */
+#define CIR_CR_PSOUT_STATUS 0xf1
+#define CIR_CR_WAKE_KEY3_ADDR 0xf8
+#define CIR_CR_WAKE_KEY3_CODE 0xf9
+#define CIR_CR_WAKE_KEY3_DC 0xfa
+#define CIR_CR_WAKE_CONTROL 0xfb
+#define CIR_CR_WAKE_KEY12_ADDR 0xfc
+#define CIR_CR_WAKE_KEY4_ADDR 0xfd
+#define CIR_CR_WAKE_KEY5_ADDR 0xfe
+
+#define CLASS_RX_ONLY 0xff
+#define CLASS_RX_2TX 0x66
+#define CLASS_RX_1TX 0x33
+
+/* CIR device registers */
+#define CIR_STATUS 0x00
+#define CIR_RX_DATA 0x01
+#define CIR_TX_CONTROL 0x02
+#define CIR_TX_DATA 0x03
+#define CIR_CONTROL 0x04
+
+/* Bits to enable CIR wake */
+#define LOGICAL_DEV_ACPI 0x01
+#define LDEV_ACPI_WAKE_EN_REG 0xe8
+#define ACPI_WAKE_EN_CIR_BIT 0x04
+
+#define LDEV_ACPI_PME_EN_REG 0xf0
+#define LDEV_ACPI_PME_CLR_REG 0xf1
+#define ACPI_PME_CIR_BIT 0x02
+
+#define LDEV_ACPI_STATE_REG 0xf4
+#define ACPI_STATE_CIR_BIT 0x20
+
+/*
+ * CIR status register (0x00):
+ * 7 - CIR_IRQ_EN (1 = enable CIR IRQ, 0 = disable)
+ * 3 - TX_FINISH (1 when TX finished, write 1 to clear)
+ * 2 - TX_UNDERRUN (1 on TX underrun, write 1 to clear)
+ * 1 - RX_TIMEOUT (1 on RX timeout, write 1 to clear)
+ * 0 - RX_RECEIVE (1 on RX receive, write 1 to clear)
+ */
+#define CIR_STATUS_IRQ_EN 0x80
+#define CIR_STATUS_TX_FINISH 0x08
+#define CIR_STATUS_TX_UNDERRUN 0x04
+#define CIR_STATUS_RX_TIMEOUT 0x02
+#define CIR_STATUS_RX_RECEIVE 0x01
+#define CIR_STATUS_IRQ_MASK 0x0f
+
+/*
+ * CIR TX control register (0x02):
+ * 7 - TX_START (1 to indicate TX start, auto-cleared when done)
+ * 6 - TX_END (1 to indicate TX data written to TX fifo)
+ */
+#define CIR_TX_CONTROL_TX_START 0x80
+#define CIR_TX_CONTROL_TX_END 0x40
+